-\fB--compress-slow\fR
-With \fB--recompress\fR: Spend even more time compressing the data in order to
-achieve a higher compression ratio. Currently, this only has an effect with LZX
-("maximum") compression. Depending on the data, compressing with this option
-will take around 10 to 15 times longer and produce a LZX-compressed WIM about 1%
-to 5% smaller than one produced with the default LZX compressor. Depending on
-the data, the resulting WIM may be approximately the same size (typically no
-more than 0.4% different) as a LZX-compressed WIM produced by WIMGAPI.
+\fB--recompress-slow\fR, \fB--compress-slow\fR
+Spend even more time compressing the data in order to achieve a more optimal
+compression ratio. For LZX ("maximum") compression, compared to the default
+\fB--recompress\fR this will make compression about twice as slow and may
+improve the compression ratio by maybe 1%, depending on the data. For LZMS
+("recovery") compression this option also has an effect. For XPRESS ("fast")
+compression this option has no effect; however you may use \fB--compress\fR=LZX
+\fB--recompress-slow\fR to change the compression type to LZX and recompress
+slowly, as per this option. In any case, this option implies
+\fB--recompress\fR.
+.TP
+\fB--compress\fR=\fITYPE\fR
+Recompress the WIM file using the specified compression type. \fITYPE\fR may be
+"none", "fast" (or "XPRESS"), or "maximum" (or "LZX"). This implies
+\fB--recompress\fR.
+.IP ""
+\fITYPE\fR may also be "recovery" (or "LZMS"); however, this will result in
+reduced compatibility. See the documentation for this option to
+\fB@IMAGEX_PROGNAME@ capture\fR (1) for more details.
+.TP
+\fB--chunk-size\fR=\fISIZE\fR
+Set the WIM compression chunk size to \fISIZE\fR. See the documentation for
+this option to \fB@IMAGEX_PROGNAME@ capture\fR (1) for more details.
+.TP
+\fB--pack-streams\fR, \fB--solid\fR
+Create a "solid" archive that compresses multiple files together. This can
+result in a higher compression ratio, but has disadvantages such as reduced
+compatibility; see the documentation for this option to
+\fB@IMAGEX_PROGNAME@-capture\fR (1) for more details.
+.TP
+\fB--pack-chunk-size\fR=\fISIZE\fR, \fB--solid-chunk-size\fR=\fISIZE\fR
+Like \fB--chunk-size\fR, but set the chunk size used in packed resources.