*
* This file contains extensive comments for generating documentation with
* Doxygen. The built HTML documentation can be viewed at
- * http://wimlib.sourceforge.net.
+ * http://wimlib.sourceforge.net. Make sure to see the <a
+ * href="modules.html">Modules page</a> to make more sense of the declarations
+ * in this header.
*/
/*
* along with wimlib; if not, see http://www.gnu.org/licenses/.
*/
-/** \mainpage
+/**
+ * @mainpage
*
- * \section intro Introduction
+ * @section sec_intro Introduction
*
* This is the documentation for the library interface of wimlib 1.5.0, a C
* library for creating, modifying, extracting, and mounting files in the
* If you have installed wimlib and want to know how to use the @b wimlib-imagex
* program, please see the README file or manual pages.
*
- * \section installing_and_compiling Installing and Compiling
+ * @section sec_installing_and_compiling Installing and Compiling
*
* wimlib uses the GNU autotools, so, on UNIX-like systems, it should be easy to
* install with <code>configure && make && sudo make install</code>; however,
* wimlib_global_init() can (and in some cases, must) be called. See its
* documentation for more details.
*
- * \section basic_wim_handling_concepts Basic WIM handling concepts
+ * @section sec_basic_wim_handling_concepts Basic WIM handling concepts
*
* wimlib wraps up a WIM file in an opaque ::WIMStruct structure. There are
* two ways to create such a structure: wimlib_open_wim(), which opens a WIM
* file and creates a ::WIMStruct representing it, and wimlib_create_new_wim(),
* which creates a new ::WIMStruct that initially contains no images and does
- * not yet have a backing on-disk file.
+ * not yet have a backing on-disk file. See @ref G_creating_and_opening_wims
+ * for more details.
*
* A WIM file, represented by a ::WIMStruct, contains zero or more images.
* Images can be extracted (or "applied") using wimlib_extract_image(), added
* represented by a ::WIMStruct have no persistent effect until the WIM is
* actually written to an on-disk file. This can be done using wimlib_write(),
* but if the WIM was originally opened using wimlib_open_wim(), then
- * wimlib_overwrite() can be used instead.
+ * wimlib_overwrite() can be used instead. See @ref G_extracting_wims, @ref
+ * G_modifying_wims, and @ref G_writing_and_overwriting_wims for more details.
*
* Note that with this ::WIMStruct abstraction, performing many tasks on WIM
* files is a multi-step process. For example, to add, or "append" an image to
* you can make multiple changes to a WIM and commit them all to the underlying
* file in only one overwrite operation, which is more efficient.
*
- * \section cleaning_up Cleaning up
+ * @section sec_cleaning_up Cleaning up
*
* After you are done with any ::WIMStruct, you can call wimlib_free() to free
* all resources associated with it. Also, when you are completely done with
* using wimlib in your program, you can call wimlib_global_cleanup() to free
* any other resources allocated by the library.
*
- * \section error_handling Error Handling
+ * @section sec_error_handling Error Handling
*
* Most functions in wimlib return 0 on success and a positive error code on
* failure. Use wimlib_get_error_string() to get a string that describes an
* Currently, error messages and strings (as well as all documentation, for that
* matter) are only available in English.
*
- * \section encodings Locales and character encodings
+ * @section sec_encodings Locales and character encodings
*
* To support Windows as well as UNIX-like systems, wimlib's API typically takes
* and returns strings of ::wimlib_tchar, which are in a platform-dependent
* default, wimlib on UNIX will assume the locale is UTF-8 capable unless you
* call wimlib_global_init() after having set your desired locale.
*
- * \section advanced Additional information and features
+ * @section sec_advanced Additional information and features
+ *
+ *
+ * @subsection subsec_mounting_wim_images Mounting WIM images
+ *
+ * See @ref G_mounting_wim_images.
+ *
+ * @subsection subsec_progress_functions Progress Messages
+ *
+ * See @ref G_progress.
+ *
+ * @subsection subsec_non_standalone_wims Non-standalone WIMs
+ *
+ * See @ref G_nonstandalone_wims.
+ *
+ * @subsection subsec_pipable_wims Pipable WIMs
+ *
+ * wimlib supports a special "pipable" WIM format which unfortunately is @b not
+ * compatible with Microsoft's software. To create a pipable WIM, call
+ * wimlib_write(), wimlib_write_to_fd(), or wimlib_overwrite() with
+ * ::WIMLIB_WRITE_FLAG_PIPABLE specified. Pipable WIMs are pipable in both
+ * directions, so wimlib_write_to_fd() can be used to write a pipable WIM to a
+ * pipe, and wimlib_extract_image_from_pipe() can be used to apply an image from
+ * a pipable WIM. wimlib can also transparently open and operate on pipable WIM
+ * s using a seekable file descriptor using the regular function calls (e.g.
+ * wimlib_open_wim(), wimlib_extract_image()).
+ *
+ * See the documentation for the <b>--pipable</b> flag of <b>wimlib-imagex
+ * capture</b> for more information about pipable WIMs.
+ *
+ * @subsection subsec_thread_safety Thread Safety
+ *
+ * wimlib is thread-safe, with the following exceptions:
+ * - Different threads cannot operate on the same ::WIMStruct at the same time;
+ * they must use different ::WIMStruct's.
+ * - You must call wimlib_global_init() in one thread before calling any other
+ * functions.
+ * - wimlib_set_print_errors() and wimlib_set_memory_allocator() both apply globally.
+ * - wimlib_mount_image(), while it can be used to mount multiple WIMs
+ * concurrently in the same process, will daemonize the entire process when it
+ * does so for the first time. This includes changing the working directory
+ * to the root directory.
+ *
+ * @subsection subsec_limitations Limitations
+ *
+ * This section documents some technical limitations of wimlib not already
+ * documented in the man page for @b wimlib-imagex.
+ *
+ * - The old WIM format from Vista pre-releases is not supported.
+ * - Compressed resource chunk sizes other than 32768 are not supported. This
+ * doesn't seem to be a real problem because the chunk size always seems to be
+ * this value.
+ * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
+ * functionality other than that already present in @b ImageX, that allows you
+ * to make certain Windows-specific modifications to a Windows PE image, such
+ * as adding a driver or Windows component. Such a tool could be implemented
+ * on top of wimlib.
+ *
+ * @subsection more_info More information
+ *
+ * You are advised to read the README as well as the manual pages for
+ * <b>wimlib-imagex</b>, since not all relevant information is repeated here in
+ * the API documentation.
+ */
+
+/** @defgroup G_general General
+ *
+ * @brief Declarations and structures shared across the library.
+ */
+
+/** @defgroup G_creating_and_opening_wims Creating and Opening WIMs
+ *
+ * @brief Create new WIMs and open existing WIMs.
+ */
+
+/** @defgroup G_wim_information Retrieving WIM information and directory listings
+ *
+ * @brief Retrieve information about a WIM or WIM image.
+ */
+
+/** @defgroup G_modifying_wims Modifying WIMs
*
- * \subsection image_addition Image addition/capture
+ * @brief Make changes to a WIM.
*
- * As described in \ref basic_wim_handling_concepts, capturing a new WIM or
+ * @section sec_adding_images Capturing and adding WIM images
+ *
+ * As described in @ref sec_basic_wim_handling_concepts, capturing a new WIM or
* appending an image to an existing WIM is a multi-step process, but at its
* core is wimlib_add_image() or an equivalent function. Normally,
* wimlib_add_image() takes an on-disk directory tree and logically adds it to a
* Note that some details of how image addition/capture works are documented
* more fully in the manual page for <b>wimlib-imagex capture</b>.
*
- * \subsection extraction Image extraction/application
+ * @section sec_deleting_images Deleting WIM images
+ *
+ * wimlib_delete_image() can delete an image from a ::WIMStruct. But as usual,
+ * wimlib_write() or wimlib_overwrite() must be called to cause the changes to
+ * be made persistent in an on-disk WIM file.
+ *
+ * @section sec_exporting_images Exporting WIM images
+ *
+ * wimlib_export_image() can copy, or "export", an image from one WIM to
+ * another.
+ *
+ * @section sec_other_modifications Other modifications
+ *
+ * wimlib_update_image() can add, delete, and rename files in a WIM image.
+ *
+ * wimlib_set_image_name(), wimlib_set_image_descripton(), and
+ * wimlib_set_image_flags() can change other image metadata.
+ *
+ * wimlib_set_wim_info() can change information about the WIM file itself, such
+ * as the boot index.
+ */
+
+/** @defgroup G_extracting_wims Extracting WIMs
+ *
+ * @brief Extract files, directories, and images from a WIM.
*
* wimlib_extract_image() extracts, or "applies", an image from a WIM
* (represented, as usual, by a ::WIMStruct). This normally extracts the image
* certain files or directories from a WIM image, instead of a full image.
*
* A third function, wimlib_extract_image_from_pipe(), allows an image to be
- * extracted from a pipable WIM sent over a pipe; see \ref pipable_wims.
+ * extracted from a pipable WIM sent over a pipe; see @ref subsec_pipable_wims.
*
* Note that some details of how image extraction/application works are
* documented more fully in the manual pages for <b>wimlib-imagex apply</b> and
* <b>wimlib-imagex extract</b>.
+ */
+
+/** @defgroup G_mounting_wim_images Mounting WIM images
*
- * \subsection non_standalone_wims Non-standalone WIMs
- *
- * Earlier it was stated that a ::WIMStruct represents a WIM file, but there's a
- * bit more to it than that. Normally, WIM files are "standalone". However,
- * WIM files can also be arranged in non-standalone ways, such as a set of
- * on-disk files that together form a single "split WIM" or "delta WIM". Such
- * arrangements are fully supported by wimlib. However, as a result, in such
- * cases a ::WIMStruct created from one of these on-disk files initially only
- * partially represents the full WIM and needs to, in effect, be logically
- * combined with other ::WIMStruct's before performing certain operations, such
- * as extracting files with wimlib_extract_image() or wimlib_extract_files().
- * This is done by calling wimlib_reference_resource_files() or
- * wimlib_reference_resources().
- *
- * wimlib_write() can create delta WIMs as well as standalone WIMs, but a
- * specialized function (wimlib_split()) is needed to create a split WIM.
- *
- * \subsection mounting_wim_images Mounting WIM images
+ * @brief Mount and unmount WIM images.
*
* On UNIX-like systems supporting FUSE (such as Linux), wimlib supports
* mounting images from WIM files either read-only or read-write. To mount an
* compiled with the <code>--without-fuse</code> flag, these functions will be
* available but will fail with ::WIMLIB_ERR_UNSUPPORTED. Note that mounting an
* image read-write is an alternative to calling wimlib_update_image().
+ */
+
+/** @defgroup G_progress Progress Messages
*
- * \subsection progress_functions Progress Functions
+ * @brief Track the progress of long WIM operations.
*
* When operating on large archives, operations such as extraction will
* naturally take a while to complete. Because of this and to improve the
* function will be called periodically during the WIM operation(s) to report on
* the progress of the operation (for example, how many bytes have been written
* so far).
+ */
+
+/** @defgroup G_writing_and_overwriting_wims Writing and Overwriting WIMs
*
- * \subsection pipable_wims Pipable WIMs
- *
- * wimlib supports a special "pipable" WIM format which unfortunately is @b not
- * compatible with Microsoft's software. To create a pipable WIM, call
- * wimlib_write(), wimlib_write_to_fd(), or wimlib_overwrite() with
- * ::WIMLIB_WRITE_FLAG_PIPABLE specified. Pipable WIMs are pipable in both
- * directions, so wimlib_write_to_fd() can be used to write a pipable WIM to a
- * pipe, and wimlib_extract_image_from_pipe() can be used to apply an image from
- * a pipable WIM. wimlib can also transparently open and operate on pipable WIM
- * s using a seekable file descriptor using the regular function calls (e.g.
- * wimlib_open_wim(), wimlib_extract_image()).
- *
- * See the documentation for the <b>--pipable</b> flag of <b>wimlib-imagex
- * capture</b> for more information about pipable WIMs.
- *
- * \subsection thread_safety Thread Safety
+ * @brief Write and overwrite on-disk WIM files.
*
- * wimlib is thread-safe, with the following exceptions:
- * - Different threads cannot operate on the same ::WIMStruct at the same time;
- * they must use different ::WIMStruct's.
- * - You must call wimlib_global_init() in one thread before calling any other
- * functions.
- * - wimlib_set_print_errors() and wimlib_set_memory_allocator() both apply globally.
- * - wimlib_mount_image(), while it can be used to mount multiple WIMs
- * concurrently in the same process, will daemonize the entire process when it
- * does so for the first time. This includes changing the working directory
- * to the root directory.
+ * As described in @ref sec_basic_wim_handling_concepts, these functions are
+ * critical to the design of the library as they allow new or modified WIMs to
+ * actually be written to on-disk files. Generally, wimlib_write() is the
+ * function you need to call to write a new WIM file, and wimlib_overwrite() is
+ * the function you need to call to persistently update an existing WIM file.
+ */
+
+/** @defgroup G_nonstandalone_wims Creating and handling non-standalone WIMs
*
- * \subsection limitations Limitations
+ * @brief Create and handle non-standalone WIMs, such as split and delta WIMs.
*
- * This section documents some technical limitations of wimlib not already
- * documented in the man page for @b wimlib-imagex.
- *
- * - The old WIM format from Vista pre-releases is not supported.
- * - Compressed resource chunk sizes other than 32768 are not supported. This
- * doesn't seem to be a real problem because the chunk size always seems to be
- * this value.
- * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
- * functionality other than that already present in @b ImageX, that allows you
- * to make certain Windows-specific modifications to a Windows PE image, such
- * as adding a driver or Windows component. Such a tool could be implemented
- * on top of wimlib.
+ * Normally, ::WIMStruct represents a WIM file, but there's a bit more to it
+ * than that. Normally, WIM files are "standalone". However, WIM files can
+ * also be arranged in non-standalone ways, such as a set of on-disk files that
+ * together form a single "split WIM" or "delta WIM". Such arrangements are
+ * fully supported by wimlib. However, as a result, in such cases a ::WIMStruct
+ * created from one of these on-disk files initially only partially represents
+ * the full WIM and needs to, in effect, be logically combined with other
+ * ::WIMStruct's before performing certain operations, such as extracting files
+ * with wimlib_extract_image() or wimlib_extract_files(). This is done by
+ * calling wimlib_reference_resource_files() or wimlib_reference_resources().
*
- * \subsection more_info More information
+ * wimlib_write() can create delta WIMs as well as standalone WIMs, but a
+ * specialized function (wimlib_split()) is needed to create a split WIM.
+ */
+
+/** @defgroup G_compression Compression and decompression functions
*
- * You are advised to read the README as well as the manual pages for
- * <b>wimlib-imagex</b>, since not all relevant information is repeated here in
- * the API documentation.
+ * @brief Functions for LZX and XPRESS compression and decompression, exported
+ * for convenience only. These functions normally do not need to be used.
*/
#ifndef _WIMLIB_H
#include <inttypes.h>
#include <time.h>
-/** Major version of the library (for example, the 1 in 1.2.5). */
+/** @ingroup G_general
+ * @{ */
+
+/** Major version of the library (for example, the 1 in 1.2.5). */
#define WIMLIB_MAJOR_VERSION 1
/** Minor version of the library (for example, the 2 in 1.2.5). */
extern "C" {
#endif
+/** @} */
+/** @ingroup G_general
+ * @{ */
+
/**
* Opaque structure that represents a WIM file. This is an in-memory structure
* and need not correspond to a specific on-disk file. However, a ::WIMStruct
*
* Use wimlib_write() or wimlib_overwrite() to actually write an on-disk WIM
* file from a ::WIMStruct.
+ *
+ * See @ref sec_basic_wim_handling_concepts for more information.
*/
#ifndef WIMLIB_WIMSTRUCT_DECLARED
typedef struct WIMStruct WIMStruct;
#ifdef __WIN32__
typedef wchar_t wimlib_tchar;
#else
-/** See \ref encodings */
+/** See @ref sec_encodings */
typedef char wimlib_tchar;
#endif
WIMLIB_COMPRESSION_TYPE_XPRESS = 2,
};
+/** @} */
+/** @ingroup G_progress
+ * @{ */
+
/** Possible values of the first parameter to the user-supplied
* ::wimlib_progress_func_t progress function */
enum wimlib_progress_msg {
typedef int (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
const union wimlib_progress_info *info);
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
+
/** An array of these structures is passed to wimlib_add_image_multisource() to
* specify the sources from which to create a WIM image. */
struct wimlib_capture_source {
* reparse-point fixups by default when capturing or applying WIM images. */
#define WIMLIB_CHANGE_RPFIX_FLAG 0x00000008
+/** @} */
+/** @ingroup G_wim_information
+ * @{ */
+
/** General information about a WIM file. */
struct wimlib_wim_info {
typedef int (*wimlib_iterate_lookup_table_callback_t)(const struct wimlib_resource_entry *resource,
void *user_ctx);
-/**
- * @name Directory tree iteration flags
- *
- * The following flags can be passed to wimlib_iterate_dir_tree().
- *
- * @{
- */
-
/** For wimlib_iterate_dir_tree(): Iterate recursively on children rather than
* just on the specified path. */
#define WIMLIB_ITERATE_DIR_TREE_FLAG_RECURSIVE 0x00000001
#define WIMLIB_ITERATE_DIR_TREE_FLAG_RESOURCES_NEEDED 0x00000004
-/**
- * @name Add flags
- *
- * The following flags can be passed to wimlib_add_image(),
- * wimlib_add_image_multisource(), and add commands passed to
- * wimlib_update_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Directly capture a NTFS volume rather than a generic directory. This flag
* cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE
#define WIMLIB_ADD_IMAGE_FLAG_WINCONFIG WIMLIB_ADD_FLAG_WINCONFIG
-/**
- * @name Delete flags
- *
- * The following flags can be specified in delete commands passed to
- * wimlib_update_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Do not issue an error if the path to delete does not exist. */
#define WIMLIB_DELETE_FLAG_FORCE 0x00000001
* issued if the path to delete is a directory. */
#define WIMLIB_DELETE_FLAG_RECURSIVE 0x00000002
-/**
- * @name Export flags
- *
- * The following flags can be passed to wimlib_export_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/**
* If a single image is being exported, mark it bootable in the destination WIM.
/** Give the exported image(s) no descriptions. */
#define WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS 0x00000004
-/**
- * @name Extract flags
- *
- * The following flags can be passed to wimlib_extract_image(),
- * wimlib_extract_files(), and wimlib_extract_image_from_pipe().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_extracting_wims
+ * @{ */
/** Extract the image directly to a NTFS volume rather than a generic directory.
* This mode is only available if wimlib was compiled with libntfs-3g support;
* behavior is currently less than satisfactory. Do not use (yet). */
#define WIMLIB_EXTRACT_FLAG_RESUME 0x00010000
-/**
- * @name Mount flags
- *
- * The following flags can be passed to wimlib_mount_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_mounting_wim_images
+ * @{ */
/** Mount the WIM image read-write rather than the default of read-only. */
#define WIMLIB_MOUNT_FLAG_READWRITE 0x00000001
* allow_other option to FUSE mount) */
#define WIMLIB_MOUNT_FLAG_ALLOW_OTHER 0x00000040
-/**
- * @name Open flags
- *
- * The following flags can be passed to wimlib_open_wim() and several other
- * functions such as wimlib_join().
- * @{
- */
+/** @} */
+/** @ingroup G_creating_and_opening_wims
+ * @{ */
/** Verify the WIM contents against the WIM's integrity table, if present. This
* causes the raw data of the WIM file, divided into 10 MB chunks, to be
* integrity table is invalid). */
#define WIMLIB_OPEN_FLAG_CHECK_INTEGRITY 0x00000001
-/** Issue an error if the WIM is part of a split WIM. */
+/** Issue an error if the WIM is part of a split WIM. Software can provide
+ * this flag for convenience if it explicitly does not want to support split
+ * WIMs. */
#define WIMLIB_OPEN_FLAG_ERROR_IF_SPLIT 0x00000002
/** Check if the WIM is writable and return ::WIMLIB_ERR_WIM_IS_READONLY if it
* an error sooner rather than later. */
#define WIMLIB_OPEN_FLAG_WRITE_ACCESS 0x00000004
-/**
- * @name Unmount flags
- *
- * The following flags can be passed to wimlib_unmount_image().
- * @{
- */
+/** @} */
+/** @ingroup G_mounting_wim_images
+ * @{ */
/** See ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
#define WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY 0x00000001
/** Do a "lazy" unmount (detach filesystem immediately, even if busy). */
#define WIMLIB_UNMOUNT_FLAG_LAZY 0x00000010
-/**
- * @name Update flags
- *
- * The following flags can be passed to wimlib_update_image().
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Send ::WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND and
* ::WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND messages. */
#define WIMLIB_UPDATE_FLAG_SEND_PROGRESS 0x00000001
-/**
- * @name Write flags
- *
- * The following flags can be passed to wimlib_write(), wimlib_overwrite(),
- * wimlib_write_to_fd(), and several other functions such as wimlib_join().
- * @{
- */
+/** @} */
+/** @ingroup G_writing_and_overwriting_wims
+ * @{ */
/** Include an integrity table in the WIM.
*
* already implied for wimlib_overwrite(). */
#define WIMLIB_WRITE_FLAG_STREAMS_OK 0x00000400
-/**
- * @name Init flags
- *
- * The following flags can be passed to wimlib_global_init().
- * @{
- */
+/** @} */
+/** @ingroup G_general
+ * @{ */
/** Assume that strings are represented in UTF-8, even if this is not the
* locale's character encoding. This flag is ignored on Windows, where wimlib
*/
#define WIMLIB_INIT_FLAG_STRICT_APPLY_PRIVILEGES 0x00000008
-/**
- * @name Resource reference flags
- *
- * The following flags can be passed to wimlib_reference_resource_files() and
- * wimlib_reference_resources().
- * @{
- */
+/** @} */
+/** @ingroup G_nonstandalone_wims
+ * @{ */
/** wimlib_reference_resource_files() only: Enable shell-style filename
* globbing. */
* ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. */
#define WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH 0x00000002
-/**
- * @}
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** The specific type of update to perform. */
enum wimlib_update_op {
};
};
-/** Specification of a file or directory tree to extract from a WIM image. */
+/** @} */
+/** @ingroup G_extracting_wims
+ * @{ */
+
+/** Specification of a file or directory tree to extract from a WIM image. Used
+ * in calls to wimlib_extract_files(). */
struct wimlib_extract_command {
/** Path to file or directory tree within the WIM image to extract. It
* must be provided as an absolute path from the root of the WIM image.
int extract_flags;
};
+/** @} */
+/** @ingroup G_general
+ * @{ */
+
/**
* Possible values of the error code returned by many functions in wimlib.
*
#define WIMLIB_ALL_IMAGES (-1)
/**
+ * @ingroup G_modifying_wims
+ *
* Appends an empty image to a WIM file. This empty image will initially
* contain no files or directories, although if written without further
* modifications, a root directory will be created automatically for it. After
int *new_idx_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Adds an image to a WIM file from an on-disk directory tree or NTFS volume.
*
* The directory tree or NTFS volume is scanned immediately to load the dentry
int add_flags,
wimlib_progress_func_t progress_func);
-/** This function is equivalent to wimlib_add_image() except it allows for
+/**
+ * @ingroup G_modifying_wims
+ *
+ * This function is equivalent to wimlib_add_image() except it allows for
* multiple sources to be combined into a single WIM image. This is done by
* specifying the @p sources and @p num_sources parameters instead of the @p
* source parameter of wimlib_add_image(). The rest of the parameters are the
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Creates a ::WIMStruct for a new WIM file.
*
* This only creates an in-memory structure for a WIM that initially contains no
wimlib_create_new_wim(int ctype, WIMStruct **wim_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Deletes an image, or all images, from a WIM file.
*
* All streams referenced by the image(s) being deleted are removed from the
wimlib_delete_image(WIMStruct *wim, int image);
/**
+ * @ingroup G_modifying_wims
+ *
* Exports an image, or all the images, from a WIM file, into another WIM file.
*
* The destination image is made to share the same dentry tree and security data
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_extracting_wims
+ *
* Extract zero or more files or directory trees from a WIM image.
*
* This generalizes the single-image extraction functionality of
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_extracting_wims
+ *
* Extracts an image, or all images, from a WIM to a directory or directly to a
* NTFS volume image.
*
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_extracting_wims
+ *
* Since wimlib v1.5.0: Extract one or more images from a pipe on which a
* pipable WIM is being sent.
*
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Extracts the XML data of a WIM file to a file stream. Every WIM file
* includes a string of XML that describes the images contained in the WIM.
*
wimlib_extract_xml_data(WIMStruct *wim, FILE *fp);
/**
+ * @ingroup G_general
+ *
* Frees all memory allocated for a WIMStruct and closes all files associated
* with it.
*
wimlib_free(WIMStruct *wim);
/**
+ * @ingroup G_general
+ *
* Converts a ::wimlib_compression_type value into a string.
*
* @param ctype
wimlib_get_compression_type_string(int ctype);
/**
+ * @ingroup G_general
+ *
* Converts an error code into a string describing it.
*
* @param code
wimlib_get_error_string(enum wimlib_error_code code);
/**
+ * @ingroup G_wim_information
+ *
* Returns the description of the specified image.
*
* @param wim
wimlib_get_image_description(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Returns the name of the specified image.
*
* @param wim
/**
+ * @ingroup G_wim_information
+ *
* Get basic information about a WIM file.
*
* @param wim
wimlib_get_wim_info(WIMStruct *wim, struct wimlib_wim_info *info);
/**
+ * @ingroup G_general
+ *
* Initialization function for wimlib. Call before using any other wimlib
* function except wimlib_set_print_errors(). If not done manually, this
* function will be called automatically with @p init_flags set to
wimlib_global_init(int init_flags);
/**
+ * @ingroup G_general
+ *
* Cleanup function for wimlib. You are not required to call this function, but
* it will release any global resources allocated by the library.
*/
wimlib_global_cleanup(void);
/**
+ * @ingroup G_wim_information
+ *
* Determines if an image name is already used by some image in the WIM.
*
* @param wim
wimlib_image_name_in_use(const WIMStruct *wim, const wimlib_tchar *name);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through a file or directory tree in the WIM image. By specifying
* appropriate flags and a callback function, you can get the attributes of a
* file in the WIM, get a directory listing, or even get a listing of the entire
wimlib_iterate_dir_tree_callback_t cb, void *user_ctx);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through the lookup table of a WIM file. This can be used to directly
* get a listing of the unique resources contained in a WIM file over all
* images. Both file resources and metadata resources are included. However,
void *user_ctx);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Joins a split WIM into a stand-alone one-part WIM.
*
* @param swms
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_compression
+ *
* Compress a chunk of a WIM resource using LZX compression.
*
* This function is exported for convenience only and should only be used by
wimlib_lzx_compress(const void *chunk, unsigned chunk_size, void *out);
/**
+ * @ingroup G_compression
+ *
* Decompresses a block of LZX-compressed data as used in the WIM file format.
*
* Note that this will NOT work unmodified for LZX as used in the cabinet
/**
+ * @ingroup G_mounting_wim_images
+ *
* Mounts an image in a WIM file on a directory read-only or read-write.
*
* As this is implemented using FUSE (Filesystme in UserSpacE), this is not
const wimlib_tchar *staging_dir);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Opens a WIM file and creates a ::WIMStruct for it.
*
* @param wim_file
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Overwrites the file that the WIM was originally read from, with changes made.
* This only makes sense for ::WIMStruct's obtained from wimlib_open_wim()
* rather than wimlib_create_new_wim().
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Prints information about one image, or all images, contained in a WIM.
*
* @param wim
wimlib_print_available_images(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Deprecated in favor of wimlib_get_wim_info(), which provides the information
* in a way that can be accessed programatically.
*/
wimlib_print_header(const WIMStruct *wim) _wimlib_deprecated;
/**
+ * @ingroup G_wim_information
+ *
* Deprecated in favor of wimlib_iterate_dir_tree(), which provides the
* information in a way that can be accessed programatically.
*/
wimlib_print_metadata(WIMStruct *wim, int image) _wimlib_deprecated;
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Reference resources from other WIM files or split WIM parts. This function
* can be used on WIMs that are not standalone, such as split or "delta" WIMs,
* to load needed resources (that is, "streams" keyed by SHA1 message digest)
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Similar to wimlib_reference_resource_files(), but operates at a lower level
* where the caller must open the ::WIMStruct for each referenced file itself.
*
unsigned num_resource_wims, int ref_flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Declares that a newly added image is mostly the same as a prior image, but
* captured at a later point in time, possibly with some modifications in the
* intervening time. This is designed to be used in incremental backups of the
int flags, wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Translates a string specifying the name or number of an image in the WIM into
* the number of the image. The images are numbered starting at 1.
*
const wimlib_tchar *image_name_or_num);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the description of an image in the WIM.
*
* @param wim
const wimlib_tchar *description);
/**
+ * @ingroup G_modifying_wims
+ *
* Set basic information about a WIM.
*
* @param wim
int which);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes what is written in the \<FLAGS\> element in the WIM XML data
* (something like "Core" or "Ultimate")
*
wimlib_set_image_flags(WIMStruct *wim, int image, const wimlib_tchar *flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the name of an image in the WIM.
*
* @param wim
wimlib_set_image_name(WIMStruct *wim, int image, const wimlib_tchar *name);
/**
+ * @ingroup G_general
+ *
* Set the functions that wimlib uses to allocate and free memory.
*
* These settings are global and not per-WIM.
void *(*realloc_func)(void *, size_t));
/**
+ * @ingroup G_general
+ *
* Sets whether wimlib is to print error messages to @c stderr when a function
* fails. These error messages may provide information that cannot be
* determined only from the error code that is returned. Not every error will
wimlib_set_print_errors(bool show_messages);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Splits a WIM into multiple parts.
*
* @param wim
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_mounting_wim_images
+ *
* Unmounts a WIM image that was mounted using wimlib_mount_image().
*
* The image to unmount is specified by the path to the mountpoint, not the
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_modifying_wims
+ *
* Update a WIM image by adding, deleting, and/or renaming files or directories.
*
* @param wim
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Writes a WIM to a file.
*
* This brings in resources from any external locations, such as directory trees
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Since wimlib v1.5.0: Same as wimlib_write(), but write the WIM directly to a
* file descriptor, which need not be seekable if the write is done in a special
* pipable WIM format by providing ::WIMLIB_WRITE_FLAG_PIPABLE in @p
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_compression
+ *
* This function is equivalent to wimlib_lzx_compress(), but instead compresses
* the data using "XPRESS" compression.
*/
wimlib_xpress_compress(const void *chunk, unsigned chunk_size, void *out);
/**
+ * @ingroup G_compression
+ *
* This function is equivalent to wimlib_lzx_decompress(), but instead assumes
* the data is compressed using "XPRESS" compression.
*/
git://wimlib.net / wimlib / commitdiff