*/
/*
- * Copyright (C) 2010 Carl Thijssen
- * Copyright (C) 2012 Eric Biggers
+ * Copyright (C) 2012, 2013 Eric Biggers
*
* This file is part of wimlib, a library for working with WIM files.
*
* along with wimlib; if not, see http://www.gnu.org/licenses/.
*/
+#include "config.h"
+
+#if defined(HAVE_SYS_FILE_H) && defined(HAVE_FLOCK)
+/* On BSD, this should be included before "list.h" so that "list.h" can
+ * overwrite the LIST_HEAD macro. */
+# include <sys/file.h>
+#endif
+
+#ifdef __WIN32__
+# include "win32.h"
+#endif
+
+#include "list.h"
#include "wimlib_internal.h"
-#include "io.h"
+#include "buffer_io.h"
#include "dentry.h"
#include "lookup_table.h"
#include "xml.h"
-#include "lzx.h"
-#include "xpress.h"
+
+#ifdef ENABLE_MULTITHREADED_COMPRESSION
+# include <pthread.h>
+#endif
+
#include <unistd.h>
-#include <semaphore.h>
-#include <pthread.h>
#include <errno.h>
#ifdef WITH_NTFS_3G
-#include <time.h>
-#include <ntfs-3g/attrib.h>
-#include <ntfs-3g/inode.h>
-#include <ntfs-3g/dir.h>
+# include <time.h>
+# include <ntfs-3g/attrib.h>
+# include <ntfs-3g/inode.h>
+# include <ntfs-3g/dir.h>
#endif
-
#ifdef HAVE_ALLOCA_H
-#include <alloca.h>
+# include <alloca.h>
+#else
+# include <stdlib.h>
#endif
+#include <limits.h>
-/* Reopens the FILE* for a WIM read-write. */
-static int reopen_rw(WIMStruct *w)
-{
- FILE *fp;
-
- if (fclose(w->fp) != 0)
- ERROR_WITH_ERRNO("Failed to close the file `%s'", w->filename);
- w->fp = NULL;
- fp = fopen(w->filename, "r+b");
- if (!fp) {
- ERROR_WITH_ERRNO("Failed to open `%s' for reading and writing",
- w->filename);
- return WIMLIB_ERR_OPEN;
- }
- w->fp = fp;
- return 0;
-}
-
-
-
-/*
- * Writes a WIM file to the original file that it was read from, overwriting it.
- */
-WIMLIBAPI int wimlib_overwrite(WIMStruct *w, int write_flags)
-{
- const char *wimfile_name;
- size_t wim_name_len;
- int ret;
-
- if (!w)
- return WIMLIB_ERR_INVALID_PARAM;
-
- write_flags &= ~WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE;
-
- wimfile_name = w->filename;
-
- DEBUG("Replacing WIM file `%s'.", wimfile_name);
-
- if (!wimfile_name)
- return WIMLIB_ERR_NO_FILENAME;
-
- /* Write the WIM to a temporary file. */
- /* XXX should the temporary file be somewhere else? */
- wim_name_len = strlen(wimfile_name);
- char tmpfile[wim_name_len + 10];
- memcpy(tmpfile, wimfile_name, wim_name_len);
- randomize_char_array_with_alnum(tmpfile + wim_name_len, 9);
- tmpfile[wim_name_len + 9] = '\0';
-
- ret = wimlib_write(w, tmpfile, WIM_ALL_IMAGES, write_flags);
- if (ret != 0) {
- ERROR("Failed to write the WIM file `%s'", tmpfile);
- if (unlink(tmpfile) != 0)
- WARNING("Failed to remove `%s'", tmpfile);
- return ret;
- }
-
- DEBUG("Closing original WIM file.");
- /* Close the original WIM file that was opened for reading. */
- if (w->fp) {
- if (fclose(w->fp) != 0) {
- WARNING("Failed to close the file `%s'", wimfile_name);
- }
- w->fp = NULL;
- }
-
- DEBUG("Renaming `%s' to `%s'", tmpfile, wimfile_name);
-
- /* Rename the new file to the old file .*/
- if (rename(tmpfile, wimfile_name) != 0) {
- ERROR_WITH_ERRNO("Failed to rename `%s' to `%s'",
- tmpfile, wimfile_name);
- /* Remove temporary file. */
- if (unlink(tmpfile) != 0)
- ERROR_WITH_ERRNO("Failed to remove `%s'", tmpfile);
- return WIMLIB_ERR_RENAME;
- }
-
- if (write_flags & WIMLIB_WRITE_FLAG_VERBOSE)
- printf("Successfully renamed `%s' to `%s'\n", tmpfile, wimfile_name);
-
- return 0;
-}
-
-static int check_resource_offset(struct lookup_table_entry *lte, void *arg)
-{
- u64 xml_data_offset = *(u64*)arg;
- if (lte->resource_entry.offset > xml_data_offset) {
- ERROR("The following resource is *after* the XML data:");
- print_lookup_table_entry(lte);
- return WIMLIB_ERR_RESOURCE_ORDER;
- }
- return 0;
-}
-
-WIMLIBAPI int wimlib_overwrite_xml_and_header(WIMStruct *w, int write_flags)
-{
- int ret;
- FILE *fp;
- u8 *integrity_table = NULL;
- off_t xml_end;
- off_t xml_size;
- size_t bytes_written;
-
- DEBUG("Overwriting XML and header of `%s', write_flags = %#x",
- w->filename, write_flags);
-
- if (!w->filename)
- return WIMLIB_ERR_NO_FILENAME;
-
- write_flags &= ~WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE;
-
- /* Make sure that the integrity table (if present) is after the XML
- * data, and that there are no stream resources, metadata resources, or
- * lookup tables after the XML data. Otherwise, these data would be
- * destroyed by this function. */
- if (w->hdr.integrity.offset != 0 &&
- w->hdr.integrity.offset < w->hdr.xml_res_entry.offset) {
- ERROR("Didn't expect the integrity table to be before the XML data");
- return WIMLIB_ERR_RESOURCE_ORDER;
- }
-
- if (w->hdr.lookup_table_res_entry.offset >
- w->hdr.xml_res_entry.offset) {
- ERROR("Didn't expect the lookup table to be after the XML data");
- return WIMLIB_ERR_RESOURCE_ORDER;
- }
-
- ret = for_lookup_table_entry(w->lookup_table, check_resource_offset,
- &w->hdr.xml_res_entry.offset);
- if (ret != 0)
- return ret;
-
- ret = reopen_rw(w);
- if (ret != 0)
- return ret;
-
- fp = w->fp;
-
- /* The old integrity table is still OK, as the SHA1 message digests in
- * the integrity table include neither the header nor the XML data.
- * Save it for later if it exists and an integrity table was required.
- * */
- if ((write_flags & WIMLIB_WRITE_FLAG_CHECK_INTEGRITY)
- && w->hdr.integrity.offset != 0)
- {
- DEBUG("Reading existing integrity table.");
- integrity_table = MALLOC(w->hdr.integrity.size);
- if (!integrity_table)
- return WIMLIB_ERR_NOMEM;
-
- ret = read_uncompressed_resource(fp, w->hdr.integrity.offset,
- w->hdr.integrity.original_size,
- integrity_table);
- if (ret != 0)
- goto err;
- DEBUG("Done reading existing integrity table.");
- }
-
- DEBUG("Overwriting XML data.");
- /* Overwrite the XML data. */
- if (fseeko(fp, w->hdr.xml_res_entry.offset, SEEK_SET) != 0) {
- ERROR_WITH_ERRNO("Failed to seek to byte %"PRIu64" "
- "for XML data", w->hdr.xml_res_entry.offset);
- ret = WIMLIB_ERR_WRITE;
- goto err;
- }
- ret = write_xml_data(w->wim_info, WIM_ALL_IMAGES, fp, 0);
- if (ret != 0)
- goto err;
-
- DEBUG("Updating XML resource entry.");
- /* Update the XML resource entry in the WIM header. */
- xml_end = ftello(fp);
- if (xml_end == -1) {
- ret = WIMLIB_ERR_WRITE;
- goto err;
- }
- xml_size = xml_end - w->hdr.xml_res_entry.offset;
- w->hdr.xml_res_entry.size = xml_size;
- w->hdr.xml_res_entry.original_size = xml_size;
- /* XML data offset is unchanged. */
-
- if (write_flags & WIMLIB_WRITE_FLAG_CHECK_INTEGRITY) {
- DEBUG("Writing integrity table.");
- w->hdr.integrity.offset = xml_end;
- if (integrity_table) {
- /* The existing integrity table was saved. */
- bytes_written = fwrite(integrity_table, 1,
- w->hdr.integrity.size, fp);
- if (bytes_written != w->hdr.integrity.size) {
- ERROR_WITH_ERRNO("Failed to write integrity "
- "table");
- ret = WIMLIB_ERR_WRITE;
- goto err;
- }
- FREE(integrity_table);
- } else {
- /* There was no existing integrity table, so a new one
- * must be calculated. */
- ret = write_integrity_table(fp, WIM_HEADER_DISK_SIZE,
- w->hdr.lookup_table_res_entry.offset +
- w->hdr.lookup_table_res_entry.size,
- write_flags & WIMLIB_WRITE_FLAG_SHOW_PROGRESS);
- if (ret != 0)
- return ret;
-
- off_t end_integrity = ftello(fp);
- if (end_integrity == -1)
- return WIMLIB_ERR_WRITE;
-
- off_t integrity_size = end_integrity - xml_end;
- w->hdr.integrity.size = integrity_size;
- w->hdr.integrity.original_size = integrity_size;
- w->hdr.integrity.flags = 0;
- }
- } else {
- DEBUG("Truncating file to end of XML data.");
- /* No integrity table to write. The file should be truncated
- * because it's possible that the old file was longer (due to it
- * including an integrity table, or due to its XML data being
- * longer) */
- if (fflush(fp) != 0) {
- ERROR_WITH_ERRNO("Failed to flush stream for file `%s'",
- w->filename);
- return WIMLIB_ERR_WRITE;
- }
- if (ftruncate(fileno(fp), xml_end) != 0) {
- ERROR_WITH_ERRNO("Failed to truncate `%s' to %"PRIu64" "
- "bytes", w->filename, xml_end);
- return WIMLIB_ERR_WRITE;
- }
- memset(&w->hdr.integrity, 0, sizeof(struct resource_entry));
- }
-
- DEBUG("Overwriting header.");
- /* Overwrite the header. */
- if (fseeko(fp, 0, SEEK_SET) != 0) {
- ERROR_WITH_ERRNO("Failed to seek to beginning of `%s'",
- w->filename);
- return WIMLIB_ERR_WRITE;
- }
-
- ret = write_header(&w->hdr, fp);
- if (ret != 0)
- return ret;
-
- DEBUG("Closing `%s'.", w->filename);
- if (fclose(fp) != 0) {
- ERROR_WITH_ERRNO("Failed to close `%s'", w->filename);
- return WIMLIB_ERR_WRITE;
- }
- w->fp = NULL;
- DEBUG("Done.");
- return 0;
-err:
- FREE(integrity_table);
- return ret;
-}
-
+#if defined(__WIN32__) && !defined(INVALID_HANDLE_VALUE)
+# define INVALID_HANDLE_VALUE ((HANDLE)(-1))
+#endif
/* Chunk table that's located at the beginning of each compressed resource in
* the WIM. (This is not the on-disk format; the on-disk format just has an
* output file.
*/
static int
-begin_wim_resource_chunk_tab(const struct lookup_table_entry *lte,
+begin_wim_resource_chunk_tab(const struct wim_lookup_table_entry *lte,
FILE *out_fp,
off_t file_offset,
struct chunk_table **chunk_tab_ret)
chunk_tab->table_disk_size) {
ERROR_WITH_ERRNO("Failed to write chunk table in compressed "
"file resource");
+ FREE(chunk_tab);
ret = WIMLIB_ERR_WRITE;
goto out;
}
ret = 0;
-out:
*chunk_tab_ret = chunk_tab;
+out:
return ret;
}
-typedef int (*compress_func_t)(const void *, unsigned, void *, unsigned *);
-
-compress_func_t get_compress_func(int out_ctype)
-{
- if (out_ctype == WIM_COMPRESSION_TYPE_LZX)
- return lzx_compress;
- else
- return xpress_compress;
-}
-
-
/*
- * Compresses a chunk of a WIM resource.
+ * compress_func_t- Pointer to a function to compresses a chunk
+ * of a WIM resource. This may be either
+ * wimlib_xpress_compress() (xpress-compress.c) or
+ * wimlib_lzx_compress() (lzx-compress.c).
+ *
+ * @chunk: Uncompressed data of the chunk.
+ * @chunk_size: Size of the uncompressed chunk, in bytes.
+ * @out: Pointer to output buffer of size at least (@chunk_size - 1) bytes.
+ *
+ * Returns the size of the compressed data written to @out in bytes, or 0 if the
+ * data could not be compressed to (@chunk_size - 1) bytes or fewer.
*
- * @chunk: Uncompressed data of the chunk.
- * @chunk_size: Size of the uncompressed chunk in bytes.
- * @compressed_chunk: Pointer to output buffer of size at least
- * (@chunk_size - 1) bytes.
- * @compressed_chunk_len_ret: Pointer to an unsigned int into which the size
- * of the compressed chunk will be
- * returned.
- * @ctype: Type of compression to use. Must be WIM_COMPRESSION_TYPE_LZX
- * or WIM_COMPRESSION_TYPE_XPRESS.
+ * As a special requirement, the compression code is optimized for the WIM
+ * format and therefore requires (@chunk_size <= 32768).
*
- * Returns zero if compressed succeeded, and nonzero if the chunk could not be
- * compressed to any smaller than @chunk_size. This function cannot fail for
- * any other reasons.
+ * As another special requirement, the compression code will read up to 8 bytes
+ * off the end of the @chunk array for performance reasons. The values of these
+ * bytes will not affect the output of the compression, but the calling code
+ * must make sure that the buffer holding the uncompressed chunk is actually at
+ * least (@chunk_size + 8) bytes, or at least that these extra bytes are in
+ * mapped memory that will not cause a memory access violation if accessed.
*/
-static int compress_chunk(const u8 chunk[], unsigned chunk_size,
- u8 compressed_chunk[],
- unsigned *compressed_chunk_len_ret,
- int ctype)
+typedef unsigned (*compress_func_t)(const void *chunk, unsigned chunk_size,
+ void *out);
+
+compress_func_t
+get_compress_func(int out_ctype)
{
- compress_func_t compress = get_compress_func(ctype);
- return (*compress)(chunk, chunk_size, compressed_chunk,
- compressed_chunk_len_ret);
+ if (out_ctype == WIMLIB_COMPRESSION_TYPE_LZX)
+ return wimlib_lzx_compress;
+ else
+ return wimlib_xpress_compress;
}
/*
*
* @chunk: Uncompressed data of the chunk.
* @chunk_size: Size of the chunk (<= WIM_CHUNK_SIZE)
- * @out_fp: FILE * to write tho chunk to.
- * @out_ctype: Compression type to use when writing the chunk (ignored if no
- * chunk table provided)
+ * @out_fp: FILE * to write the chunk to.
+ * @compress: Compression function to use (NULL if writing uncompressed
+ * data).
* @chunk_tab: Pointer to chunk table being created. It is updated with the
* offset of the chunk we write.
*
* Returns 0 on success; nonzero on failure.
*/
-static int write_wim_resource_chunk(const u8 chunk[], unsigned chunk_size,
- FILE *out_fp, int out_ctype,
- struct chunk_table *chunk_tab)
+static int
+write_wim_resource_chunk(const void *chunk, unsigned chunk_size,
+ FILE *out_fp, compress_func_t compress,
+ struct chunk_table *chunk_tab)
{
const u8 *out_chunk;
unsigned out_chunk_size;
-
- wimlib_assert(chunk_size <= WIM_CHUNK_SIZE);
-
- if (!chunk_tab) {
- out_chunk = chunk;
- out_chunk_size = chunk_size;
- } else {
+ if (compress) {
u8 *compressed_chunk = alloca(chunk_size);
- int ret;
- ret = compress_chunk(chunk, chunk_size, compressed_chunk,
- &out_chunk_size, out_ctype);
- if (ret == 0) {
+ out_chunk_size = compress(chunk, chunk_size, compressed_chunk);
+ if (out_chunk_size) {
+ /* Write compressed */
out_chunk = compressed_chunk;
} else {
+ /* Write uncompressed */
out_chunk = chunk;
out_chunk_size = chunk_size;
}
*chunk_tab->cur_offset_p++ = chunk_tab->cur_offset;
chunk_tab->cur_offset += out_chunk_size;
+ } else {
+ /* Write uncompressed */
+ out_chunk = chunk;
+ out_chunk_size = chunk_size;
}
-
if (fwrite(out_chunk, 1, out_chunk_size, out_fp) != out_chunk_size) {
ERROR_WITH_ERRNO("Failed to write WIM resource chunk");
return WIMLIB_ERR_WRITE;
}
/*
- * Finishes a WIM chunk tale and writes it to the output file at the correct
+ * Finishes a WIM chunk table and writes it to the output file at the correct
* offset.
*
* The final size of the full compressed resource is returned in the
return 0;
}
-static int prepare_resource_for_read(struct lookup_table_entry *lte
-
- #ifdef WITH_NTFS_3G
- , ntfs_inode **ni_ret
- #endif
- )
+static int
+finalize_and_check_sha1(SHA_CTX *sha_ctx, struct wim_lookup_table_entry *lte)
{
- if (lte->resource_location == RESOURCE_IN_FILE_ON_DISK
- && !lte->file_on_disk_fp)
- {
- wimlib_assert(lte->file_on_disk);
- lte->file_on_disk_fp = fopen(lte->file_on_disk, "rb");
- if (!lte->file_on_disk_fp) {
- ERROR_WITH_ERRNO("Failed to open the file `%s' for "
- "reading", lte->file_on_disk);
- return WIMLIB_ERR_OPEN;
+ u8 md[SHA1_HASH_SIZE];
+ sha1_final(md, sha_ctx);
+ if (lte->unhashed) {
+ copy_hash(lte->hash, md);
+ } else if (!hashes_equal(md, lte->hash)) {
+ ERROR("WIM resource has incorrect hash!");
+ if (lte_filename_valid(lte)) {
+ ERROR("We were reading it from \"%"TS"\"; maybe "
+ "it changed while we were reading it.",
+ lte->file_on_disk);
}
+ return WIMLIB_ERR_INVALID_RESOURCE_HASH;
}
-#ifdef WITH_NTFS_3G
- else if (lte->resource_location == RESOURCE_IN_NTFS_VOLUME
- && !lte->attr)
- {
- struct ntfs_location *loc = lte->ntfs_loc;
- ntfs_inode *ni;
- wimlib_assert(loc);
- ni = ntfs_pathname_to_inode(*loc->ntfs_vol_p, NULL, loc->path_utf8);
- if (!ni) {
- ERROR_WITH_ERRNO("Failed to open inode `%s' in NTFS "
- "volume", loc->path_utf8);
- return WIMLIB_ERR_NTFS_3G;
- }
- lte->attr = ntfs_attr_open(ni,
- loc->is_reparse_point ? AT_REPARSE_POINT : AT_DATA,
- (ntfschar*)loc->stream_name_utf16,
- loc->stream_name_utf16_num_chars);
- if (!lte->attr) {
- ERROR_WITH_ERRNO("Failed to open attribute of `%s' in "
- "NTFS volume", loc->path_utf8);
- ntfs_inode_close(ni);
- return WIMLIB_ERR_NTFS_3G;
- }
- *ni_ret = ni;
- }
-#endif
return 0;
}
-static void end_wim_resource_read(struct lookup_table_entry *lte
- #ifdef WITH_NTFS_3G
- , ntfs_inode *ni
- #endif
- )
+
+struct write_resource_ctx {
+ compress_func_t compress;
+ struct chunk_table *chunk_tab;
+ FILE *out_fp;
+ SHA_CTX sha_ctx;
+ bool doing_sha;
+};
+
+static int
+write_resource_cb(const void *chunk, size_t chunk_size, void *_ctx)
{
- if (lte->resource_location == RESOURCE_IN_FILE_ON_DISK
- && lte->file_on_disk_fp) {
- fclose(lte->file_on_disk_fp);
- lte->file_on_disk_fp = NULL;
- }
-#ifdef WITH_NTFS_3G
- else if (lte->resource_location == RESOURCE_IN_NTFS_VOLUME) {
- if (lte->attr) {
- ntfs_attr_close(lte->attr);
- lte->attr = NULL;
+ struct write_resource_ctx *ctx = _ctx;
+
+ if (ctx->doing_sha)
+ sha1_update(&ctx->sha_ctx, chunk, chunk_size);
+
+ if (ctx->compress) {
+ return write_wim_resource_chunk(chunk, chunk_size,
+ ctx->out_fp, ctx->compress,
+ ctx->chunk_tab);
+ } else {
+ if (fwrite(chunk, 1, chunk_size, ctx->out_fp) != chunk_size) {
+ ERROR_WITH_ERRNO("Error writing to output WIM");
+ return WIMLIB_ERR_WRITE;
+ } else {
+ return 0;
}
- if (ni)
- ntfs_inode_close(ni);
}
-#endif
}
/*
- * Writes a WIM resource to a FILE * opened for writing. The resource may be
- * written uncompressed or compressed depending on the @out_ctype parameter.
+ * Write a resource to an output WIM.
*
- * If by chance the resource compresses to more than the original size (this may
- * happen with random data or files than are pre-compressed), the resource is
- * instead written uncompressed (and this is reflected in the @out_res_entry by
- * removing the WIM_RESHDR_FLAG_COMPRESSED flag).
+ * @lte: Lookup table entry for the resource, which could be in another WIM,
+ * in an external file, or in another location.
*
- * @lte: The lookup table entry for the WIM resource.
- * @out_fp: The FILE * to write the resource to.
- * @out_ctype: The compression type of the resource to write. Note: if this is
- * the same as the compression type of the WIM resource we
- * need to read, we simply copy the data (i.e. we do not
- * uncompress it, then compress it again).
- * @out_res_entry: If non-NULL, a resource entry that is filled in with the
- * offset, original size, compressed size, and compression flag
- * of the output resource.
+ * @out_fp: FILE * opened to the output WIM.
*
- * Returns 0 on success; nonzero on failure.
+ * @out_ctype: One of the WIMLIB_COMPRESSION_TYPE_* constants to indicate
+ * which compression algorithm to use.
+ *
+ * @out_res_entry: On success, this is filled in with the offset, flags,
+ * compressed size, and uncompressed size of the resource
+ * in the output WIM.
+ *
+ * @flags: WIMLIB_RESOURCE_FLAG_RECOMPRESS to force data to be recompressed
+ * even if it could otherwise be copied directly from the input.
+ *
+ * Additional notes: The SHA1 message digest of the uncompressed data is
+ * calculated (except when doing a raw copy --- see below). If the @unhashed
+ * flag is set on the lookup table entry, this message digest is simply copied
+ * to it; otherwise, the message digest is compared with the existing one, and
+ * the function will fail if they do not match.
*/
-int write_wim_resource(struct lookup_table_entry *lte,
- FILE *out_fp, int out_ctype,
- struct resource_entry *out_res_entry,
- int flags)
+int
+write_wim_resource(struct wim_lookup_table_entry *lte,
+ FILE *out_fp, int out_ctype,
+ struct resource_entry *out_res_entry,
+ int flags)
{
- u64 bytes_remaining;
- u64 original_size;
- u64 old_compressed_size;
- u64 new_compressed_size;
- u64 offset;
+ struct write_resource_ctx write_ctx;
+ u64 read_size;
+ u64 new_size;
+ off_t offset;
int ret;
- struct chunk_table *chunk_tab = NULL;
- bool raw;
- off_t file_offset;
-#ifdef WITH_NTFS_3G
- ntfs_inode *ni = NULL;
-#endif
- wimlib_assert(lte);
+ flags &= ~WIMLIB_RESOURCE_FLAG_RECOMPRESS;
- /* Original size of the resource */
- original_size = wim_resource_size(lte);
-
- /* Compressed size of the resource (as it exists now) */
- old_compressed_size = wim_resource_compressed_size(lte);
+ if (wim_resource_size(lte) == 0) {
+ /* Empty resource; nothing needs to be done, so just return
+ * success. */
+ return 0;
+ }
- /* Current offset in output file */
- file_offset = ftello(out_fp);
- if (file_offset == -1) {
- ERROR_WITH_ERRNO("Failed to get offset in output "
- "stream");
+ /* Get current position in output WIM */
+ offset = ftello(out_fp);
+ if (offset == -1) {
+ ERROR_WITH_ERRNO("Can't get position in output WIM");
return WIMLIB_ERR_WRITE;
}
- /* Are the compression types the same? If so, do a raw copy (copy
- * without decompressing and recompressing the data). */
- raw = (wim_resource_compression_type(lte) == out_ctype
- && out_ctype != WIM_COMPRESSION_TYPE_NONE);
-
- if (raw) {
+ /* If we are not forcing the data to be recompressed, and the input
+ * resource is located in a WIM with the same compression type as that
+ * desired other than no compression, we can simply copy the compressed
+ * data without recompressing it. This also means we must skip
+ * calculating the SHA1, as we never will see the uncompressed data. */
+ if (!(flags & WIMLIB_RESOURCE_FLAG_RECOMPRESS) &&
+ lte->resource_location == RESOURCE_IN_WIM &&
+ out_ctype != WIMLIB_COMPRESSION_TYPE_NONE &&
+ wimlib_get_compression_type(lte->wim) == out_ctype)
+ {
flags |= WIMLIB_RESOURCE_FLAG_RAW;
- bytes_remaining = old_compressed_size;
+ write_ctx.doing_sha = false;
+ read_size = lte->resource_entry.size;
} else {
- flags &= ~WIMLIB_RESOURCE_FLAG_RAW;
- bytes_remaining = original_size;
- }
-
- /* Empty resource; nothing needs to be done, so just return success. */
- if (bytes_remaining == 0)
- return 0;
-
- /* Buffer for reading chunks for the resource */
- u8 buf[min(WIM_CHUNK_SIZE, bytes_remaining)];
-
- /* If we are writing a compressed resource and not doing a raw copy, we
- * need to initialize the chunk table */
- if (out_ctype != WIM_COMPRESSION_TYPE_NONE && !raw) {
- ret = begin_wim_resource_chunk_tab(lte, out_fp, file_offset,
- &chunk_tab);
- if (ret != 0)
- goto out;
+ write_ctx.doing_sha = true;
+ sha1_init(&write_ctx.sha_ctx);
+ read_size = lte->resource_entry.original_size;
}
- /* If the WIM resource is in an external file, open a FILE * to it so we
- * don't have to open a temporary one in read_wim_resource() for each
- * chunk. */
-#ifdef WITH_NTFS_3G
- ret = prepare_resource_for_read(lte, &ni);
-#else
- ret = prepare_resource_for_read(lte);
-#endif
- if (ret != 0)
- goto out;
-
- /* If we aren't doing a raw copy, we will compute the SHA1 message
- * digest of the resource as we read it, and verify it's the same as the
- * hash given in the lookup table entry once we've finished reading the
- * resource. */
- SHA_CTX ctx;
- if (!raw)
- sha1_init(&ctx);
-
- /* While there are still bytes remaining in the WIM resource, read a
- * chunk of the resource, update SHA1, then write that chunk using the
- * desired compression type. */
- offset = 0;
- do {
- u64 to_read = min(bytes_remaining, WIM_CHUNK_SIZE);
- ret = read_wim_resource(lte, buf, to_read, offset, flags);
- if (ret != 0)
- goto out_fclose;
- if (!raw)
- sha1_update(&ctx, buf, to_read);
- ret = write_wim_resource_chunk(buf, to_read, out_fp,
- out_ctype, chunk_tab);
- if (ret != 0)
- goto out_fclose;
- bytes_remaining -= to_read;
- offset += to_read;
- } while (bytes_remaining);
-
- /* Raw copy: The new compressed size is the same as the old compressed
- * size
- *
- * Using WIM_COMPRESSION_TYPE_NONE: The new compressed size is the
- * original size
- *
- * Using a different compression type: Call
- * finish_wim_resource_chunk_tab() and it will provide the new
- * compressed size.
- */
- if (raw) {
- new_compressed_size = old_compressed_size;
+ /* Initialize the chunk table and set the compression function if
+ * compressing the resource. */
+ if (out_ctype == WIMLIB_COMPRESSION_TYPE_NONE ||
+ (flags & WIMLIB_RESOURCE_FLAG_RAW)) {
+ write_ctx.compress = NULL;
+ write_ctx.chunk_tab = NULL;
} else {
- if (out_ctype == WIM_COMPRESSION_TYPE_NONE)
- new_compressed_size = original_size;
- else {
- ret = finish_wim_resource_chunk_tab(chunk_tab, out_fp,
- &new_compressed_size);
- if (ret != 0)
- goto out_fclose;
- }
+ write_ctx.compress = get_compress_func(out_ctype);
+ ret = begin_wim_resource_chunk_tab(lte, out_fp,
+ offset,
+ &write_ctx.chunk_tab);
+ if (ret)
+ return ret;
}
- /* Verify SHA1 message digest of the resource, unless we are doing a raw
- * write (in which case we never even saw the uncompressed data). Or,
- * if the hash we had before is all 0's, just re-set it to be the new
- * hash. */
- if (!raw) {
- u8 md[SHA1_HASH_SIZE];
- sha1_final(md, &ctx);
- if (is_zero_hash(lte->hash)) {
- copy_hash(lte->hash, md);
- } else if (!hashes_equal(md, lte->hash)) {
- ERROR("WIM resource has incorrect hash!");
- if (lte->resource_location == RESOURCE_IN_FILE_ON_DISK) {
- ERROR("We were reading it from `%s'; maybe it changed "
- "while we were reading it.",
- lte->file_on_disk);
- }
- ret = WIMLIB_ERR_INVALID_RESOURCE_HASH;
- goto out_fclose;
- }
+ /* Write the entire resource by reading the entire resource and feeding
+ * the data through the write_resource_cb function. */
+ write_ctx.out_fp = out_fp;
+try_write_again:
+ ret = read_resource_prefix(lte, read_size,
+ write_resource_cb, &write_ctx, flags);
+ if (ret)
+ goto out_free_chunk_tab;
+
+ /* Verify SHA1 message digest of the resource, or set the hash for the
+ * first time. */
+ if (write_ctx.doing_sha) {
+ ret = finalize_and_check_sha1(&write_ctx.sha_ctx, lte);
+ if (ret)
+ goto out_free_chunk_tab;
}
- if (!raw && new_compressed_size >= original_size &&
- out_ctype != WIM_COMPRESSION_TYPE_NONE)
- {
- /* Oops! We compressed the resource to larger than the original
- * size. Write the resource uncompressed instead. */
- if (fseeko(out_fp, file_offset, SEEK_SET) != 0) {
- ERROR_WITH_ERRNO("Failed to seek to byte %"PRIu64" "
- "of output WIM file", file_offset);
- ret = WIMLIB_ERR_WRITE;
- goto out_fclose;
- }
- ret = write_wim_resource(lte, out_fp, WIM_COMPRESSION_TYPE_NONE,
- out_res_entry, flags);
- if (ret != 0)
- goto out_fclose;
- if (fflush(out_fp) != 0) {
- ERROR_WITH_ERRNO("Failed to flush output WIM file");
- ret = WIMLIB_ERR_WRITE;
- goto out_fclose;
- }
- if (ftruncate(fileno(out_fp), file_offset + out_res_entry->size) != 0) {
- ERROR_WITH_ERRNO("Failed to truncate output WIM file");
- ret = WIMLIB_ERR_WRITE;
- goto out_fclose;
- }
+ out_res_entry->flags = lte->resource_entry.flags;
+ out_res_entry->original_size = wim_resource_size(lte);
+ out_res_entry->offset = offset;
+ if (flags & WIMLIB_RESOURCE_FLAG_RAW) {
+ /* Doing a raw write: The new compressed size is the same as
+ * the compressed size in the other WIM. */
+ new_size = lte->resource_entry.size;
+ } else if (out_ctype == WIMLIB_COMPRESSION_TYPE_NONE) {
+ /* Using WIMLIB_COMPRESSION_TYPE_NONE: The new compressed size
+ * is the original size. */
+ new_size = lte->resource_entry.original_size;
+ out_res_entry->flags &= ~WIM_RESHDR_FLAG_COMPRESSED;
} else {
- if (out_res_entry) {
- out_res_entry->size = new_compressed_size;
- out_res_entry->original_size = original_size;
- out_res_entry->offset = file_offset;
- out_res_entry->flags = lte->resource_entry.flags
- & ~WIM_RESHDR_FLAG_COMPRESSED;
- if (out_ctype != WIM_COMPRESSION_TYPE_NONE)
- out_res_entry->flags |= WIM_RESHDR_FLAG_COMPRESSED;
+ /* Using a different compression type: Call
+ * finish_wim_resource_chunk_tab() and it will provide the new
+ * compressed size. */
+ ret = finish_wim_resource_chunk_tab(write_ctx.chunk_tab, out_fp,
+ &new_size);
+ if (ret)
+ goto out_free_chunk_tab;
+ if (new_size >= wim_resource_size(lte)) {
+ /* Oops! We compressed the resource to larger than the original
+ * size. Write the resource uncompressed instead. */
+ if (fseeko(out_fp, offset, SEEK_SET) ||
+ fflush(out_fp) ||
+ ftruncate(fileno(out_fp),
+ offset + wim_resource_size(lte)))
+ {
+ ERROR_WITH_ERRNO("Failed to flush and/or truncate "
+ "output WIM file");
+ ret = WIMLIB_ERR_WRITE;
+ goto out_free_chunk_tab;
+ }
+ DEBUG("Compressed %"PRIu64" => %"PRIu64" bytes; "
+ "writing uncompressed instead",
+ wim_resource_size(lte), new_size);
+ write_ctx.compress = NULL;
+ write_ctx.doing_sha = false;
+ out_ctype = WIMLIB_COMPRESSION_TYPE_NONE;
+ goto try_write_again;
}
+ out_res_entry->flags |= WIM_RESHDR_FLAG_COMPRESSED;
}
+ out_res_entry->size = new_size;
ret = 0;
-out_fclose:
-#ifdef WITH_NTFS_3G
- end_wim_resource_read(lte, ni);
-#else
- end_wim_resource_read(lte);
-#endif
-out:
- FREE(chunk_tab);
+out_free_chunk_tab:
+ FREE(write_ctx.chunk_tab);
return ret;
}
+#ifdef ENABLE_MULTITHREADED_COMPRESSION
+/* Blocking shared queue (solves the producer-consumer problem) */
struct shared_queue {
- sem_t filled_slots;
- sem_t empty_slots;
- pthread_mutex_t lock;
+ unsigned size;
unsigned front;
unsigned back;
+ unsigned filled_slots;
void **array;
- unsigned size;
+ pthread_mutex_t lock;
+ pthread_cond_t msg_avail_cond;
+ pthread_cond_t space_avail_cond;
};
-static int shared_queue_init(struct shared_queue *q, unsigned size)
+static int
+shared_queue_init(struct shared_queue *q, unsigned size)
{
+ wimlib_assert(size != 0);
q->array = CALLOC(sizeof(q->array[0]), size);
if (!q->array)
return WIMLIB_ERR_NOMEM;
-
- sem_init(&q->filled_slots, 0, 0);
- sem_init(&q->empty_slots, 0, size);
- pthread_mutex_init(&q->lock, NULL);
+ q->filled_slots = 0;
q->front = 0;
q->back = size - 1;
q->size = size;
+ pthread_mutex_init(&q->lock, NULL);
+ pthread_cond_init(&q->msg_avail_cond, NULL);
+ pthread_cond_init(&q->space_avail_cond, NULL);
return 0;
}
-static void shared_queue_destroy(struct shared_queue *q)
+static void
+shared_queue_destroy(struct shared_queue *q)
{
- sem_destroy(&q->filled_slots);
- sem_destroy(&q->empty_slots);
- pthread_mutex_destroy(&q->lock);
FREE(q->array);
+ pthread_mutex_destroy(&q->lock);
+ pthread_cond_destroy(&q->msg_avail_cond);
+ pthread_cond_destroy(&q->space_avail_cond);
}
-static void shared_queue_put(struct shared_queue *q, void *obj)
+static void
+shared_queue_put(struct shared_queue *q, void *obj)
{
- sem_wait(&q->empty_slots);
pthread_mutex_lock(&q->lock);
+ while (q->filled_slots == q->size)
+ pthread_cond_wait(&q->space_avail_cond, &q->lock);
q->back = (q->back + 1) % q->size;
q->array[q->back] = obj;
+ q->filled_slots++;
- sem_post(&q->filled_slots);
+ pthread_cond_broadcast(&q->msg_avail_cond);
pthread_mutex_unlock(&q->lock);
}
-static void *shared_queue_get(struct shared_queue *q)
+static void *
+shared_queue_get(struct shared_queue *q)
{
- sem_wait(&q->filled_slots);
+ void *obj;
+
pthread_mutex_lock(&q->lock);
+ while (q->filled_slots == 0)
+ pthread_cond_wait(&q->msg_avail_cond, &q->lock);
- void *obj = q->array[q->front];
+ obj = q->array[q->front];
q->array[q->front] = NULL;
q->front = (q->front + 1) % q->size;
+ q->filled_slots--;
- sem_post(&q->empty_slots);
+ pthread_cond_broadcast(&q->space_avail_cond);
pthread_mutex_unlock(&q->lock);
return obj;
}
-static inline int shared_queue_get_filled(struct shared_queue *q)
-{
- int sval;
- sem_getvalue(&q->filled_slots, &sval);
- return sval;
-}
-
struct compressor_thread_params {
struct shared_queue *res_to_compress_queue;
struct shared_queue *compressed_res_queue;
#define MAX_CHUNKS_PER_MSG 2
struct message {
- struct lookup_table_entry *lte;
+ struct wim_lookup_table_entry *lte;
u8 *uncompressed_chunks[MAX_CHUNKS_PER_MSG];
u8 *out_compressed_chunks[MAX_CHUNKS_PER_MSG];
u8 *compressed_chunks[MAX_CHUNKS_PER_MSG];
u64 begin_chunk;
};
-static void compress_chunks(struct message *msg, compress_func_t compress)
+static void
+compress_chunks(struct message *msg, compress_func_t compress)
{
for (unsigned i = 0; i < msg->num_chunks; i++) {
DEBUG2("compress chunk %u of %u", i, msg->num_chunks);
- int ret = compress(msg->uncompressed_chunks[i],
- msg->uncompressed_chunk_sizes[i],
- msg->compressed_chunks[i],
- &msg->compressed_chunk_sizes[i]);
- if (ret == 0) {
+ unsigned len = compress(msg->uncompressed_chunks[i],
+ msg->uncompressed_chunk_sizes[i],
+ msg->compressed_chunks[i]);
+ if (len) {
+ /* To be written compressed */
msg->out_compressed_chunks[i] = msg->compressed_chunks[i];
+ msg->compressed_chunk_sizes[i] = len;
} else {
+ /* To be written uncompressed */
msg->out_compressed_chunks[i] = msg->uncompressed_chunks[i];
msg->compressed_chunk_sizes[i] = msg->uncompressed_chunk_sizes[i];
+
}
}
}
-static void *compressor_thread_proc(void *arg)
+/* Compressor thread routine. This is a lot simpler than the main thread
+ * routine: just repeatedly get a group of chunks from the
+ * res_to_compress_queue, compress them, and put them in the
+ * compressed_res_queue. A NULL pointer indicates that the thread should stop.
+ * */
+static void *
+compressor_thread_proc(void *arg)
{
struct compressor_thread_params *params = arg;
struct shared_queue *res_to_compress_queue = params->res_to_compress_queue;
shared_queue_put(compressed_res_queue, msg);
}
DEBUG("Compressor thread terminating");
+ return NULL;
}
+#endif /* ENABLE_MULTITHREADED_COMPRESSION */
-static int write_stream_list_serial(struct list_head *stream_list,
- FILE *out_fp, int out_ctype,
- int write_flags)
+static void
+do_write_streams_progress(union wimlib_progress_info *progress,
+ wimlib_progress_func_t progress_func,
+ uint64_t size_added)
{
- struct lookup_table_entry *lte;
- int ret;
+ progress->write_streams.completed_bytes += size_added;
+ progress->write_streams.completed_streams++;
+ if (progress_func &&
+ progress->write_streams.completed_bytes >= progress->write_streams._private)
+ {
+ progress_func(WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
+ progress);
+ if (progress->write_streams._private == progress->write_streams.total_bytes) {
+ progress->write_streams._private = ~0;
+ } else {
+ progress->write_streams._private =
+ min(progress->write_streams.total_bytes,
+ progress->write_streams.completed_bytes +
+ progress->write_streams.total_bytes / 100);
+ }
+ }
+}
- list_for_each_entry(lte, stream_list, staging_list) {
- ret = write_wim_resource(lte, out_fp, out_ctype,
- <e->output_resource_entry, 0);
- if (ret != 0)
- return ret;
+static int
+do_write_stream_list(struct list_head *stream_list,
+ struct wim_lookup_table *lookup_table,
+ FILE *out_fp,
+ int out_ctype,
+ int write_resource_flags,
+ wimlib_progress_func_t progress_func,
+ union wimlib_progress_info *progress)
+{
+ int ret = 0;
+ struct wim_lookup_table_entry *lte;
+
+ /* For each stream in @stream_list ... */
+ while (!list_empty(stream_list)) {
+ lte = container_of(stream_list->next,
+ struct wim_lookup_table_entry,
+ write_streams_list);
+ list_del(<e->write_streams_list);
+ if (lte->unhashed && !lte->unique_size) {
+ /* Unhashed stream that shares a size with some other
+ * stream in the WIM we are writing. The stream must be
+ * checksummed to know if we need to write it or not. */
+ struct wim_lookup_table_entry *tmp;
+ u32 orig_refcnt = lte->out_refcnt;
+
+ ret = hash_unhashed_stream(lte,
+ lookup_table,
+ &tmp);
+ if (ret)
+ break;
+ if (tmp != lte) {
+ lte = tmp;
+ /* We found a duplicate stream. */
+ if (orig_refcnt != tmp->out_refcnt) {
+ /* We have already written, or are going
+ * to write, the duplicate stream. So
+ * just skip to the next stream. */
+ DEBUG("Discarding duplicate stream of length %"PRIu64,
+ wim_resource_size(lte));
+ goto skip_to_progress;
+ }
+ }
+ }
+
+ /* Here, @lte is either a hashed stream or an unhashed stream
+ * with a unique size. In either case we know that the stream
+ * has to be written. In either case the SHA1 message digest
+ * will be calculated over the stream while writing it; however,
+ * in the former case this is done merely to check the data,
+ * while in the latter case this is done because we do not have
+ * the SHA1 message digest yet. */
+ wimlib_assert(lte->out_refcnt != 0);
+ ret = write_wim_resource(lte,
+ out_fp,
+ out_ctype,
+ <e->output_resource_entry,
+ write_resource_flags);
+ if (ret)
+ break;
+ if (lte->unhashed) {
+ list_del(<e->unhashed_list);
+ lookup_table_insert(lookup_table, lte);
+ lte->unhashed = 0;
+ }
+ skip_to_progress:
+ do_write_streams_progress(progress,
+ progress_func,
+ wim_resource_size(lte));
}
- return 0;
+ return ret;
+}
+
+static int
+write_stream_list_serial(struct list_head *stream_list,
+ struct wim_lookup_table *lookup_table,
+ FILE *out_fp,
+ int out_ctype,
+ int write_flags,
+ wimlib_progress_func_t progress_func,
+ union wimlib_progress_info *progress)
+{
+ int write_resource_flags = 0;
+ if (write_flags & WIMLIB_WRITE_FLAG_RECOMPRESS)
+ write_resource_flags |= WIMLIB_RESOURCE_FLAG_RECOMPRESS;
+
+ progress->write_streams.num_threads = 1;
+ if (progress_func)
+ progress_func(WIMLIB_PROGRESS_MSG_WRITE_STREAMS, progress);
+ return do_write_stream_list(stream_list,
+ lookup_table,
+ out_fp,
+ out_ctype,
+ write_resource_flags,
+ progress_func,
+ progress);
}
-static int write_wim_chunks(struct message *msg, FILE *out_fp,
- struct chunk_table *chunk_tab)
+#ifdef ENABLE_MULTITHREADED_COMPRESSION
+static int
+write_wim_chunks(struct message *msg, FILE *out_fp,
+ struct chunk_table *chunk_tab)
{
for (unsigned i = 0; i < msg->num_chunks; i++) {
unsigned chunk_csize = msg->compressed_chunk_sizes[i];
if (fwrite(msg->out_compressed_chunks[i], 1, chunk_csize, out_fp)
!= chunk_csize)
{
- ERROR_WITH_ERRNO("Failed to write WIM");
+ ERROR_WITH_ERRNO("Failed to write WIM chunk");
return WIMLIB_ERR_WRITE;
}
return 0;
}
-static int main_writer_thread_proc(struct list_head *stream_list,
- FILE *out_fp,
- int out_ctype,
- struct shared_queue *res_to_compress_queue,
- struct shared_queue *compressed_res_queue,
- size_t queue_size)
-{
- int ret;
-
-
- struct message msgs[queue_size];
- ZERO_ARRAY(msgs);
-
- LIST_HEAD(available_msgs);
-
- for (size_t i = 0; i < ARRAY_LEN(msgs); i++)
- list_add(&msgs[i].list, &available_msgs);
+struct main_writer_thread_ctx {
+ struct list_head *stream_list;
+ struct wim_lookup_table *lookup_table;
+ FILE *out_fp;
+ int out_ctype;
+ struct shared_queue *res_to_compress_queue;
+ struct shared_queue *compressed_res_queue;
+ size_t num_messages;
+ int write_flags;
+ wimlib_progress_func_t progress_func;
+ union wimlib_progress_info *progress;
+
+ struct list_head available_msgs;
+ struct list_head outstanding_streams;
+ struct list_head serial_streams;
+ u64 next_chunk;
+ u64 next_num_chunks;
+ struct message *msgs;
+ struct message *next_msg;
+ size_t next_chunk_in_msg;
+ struct wim_lookup_table_entry *cur_lte;
+ struct chunk_table *cur_chunk_tab;
+ struct wim_lookup_table_entry *next_lte;
+ SHA_CTX sha_ctx;
+ u8 next_hash[20];
+};
+static int
+init_message(struct message *msg)
+{
+ for (size_t i = 0; i < MAX_CHUNKS_PER_MSG; i++) {
+ msg->compressed_chunks[i] = MALLOC(WIM_CHUNK_SIZE);
+ msg->uncompressed_chunks[i] = MALLOC(WIM_CHUNK_SIZE);
+ if (msg->compressed_chunks[i] == NULL ||
+ msg->uncompressed_chunks[i] == NULL)
+ return WIMLIB_ERR_NOMEM;
+ }
+ return 0;
+}
- struct list_head *next_resource = stream_list->next;
- struct lookup_table_entry *next_lte = container_of(next_resource,
- struct lookup_table_entry,
- staging_list);
- next_resource = next_resource->next;
- u64 next_chunk = 0;
- u64 next_num_chunks = wim_resource_chunks(next_lte);
- INIT_LIST_HEAD(&next_lte->msg_list);
- SHA_CTX next_sha_ctx;
- sha1_init(&next_sha_ctx);
+static void
+destroy_message(struct message *msg)
+{
+ for (size_t i = 0; i < MAX_CHUNKS_PER_MSG; i++) {
+ FREE(msg->compressed_chunks[i]);
+ FREE(msg->uncompressed_chunks[i]);
+ }
+}
- u8 next_hash[SHA1_HASH_SIZE];
+static void
+free_messages(struct message *msgs, size_t num_messages)
+{
+ if (msgs) {
+ for (size_t i = 0; i < num_messages; i++)
+ destroy_message(&msgs[i]);
+ FREE(msgs);
+ }
+}
- // Resources owning chunks that have been sent off for compression
- LIST_HEAD(outstanding_resources);
+static struct message *
+allocate_messages(size_t num_messages)
+{
+ struct message *msgs;
+
+ msgs = CALLOC(num_messages, sizeof(struct message));
+ if (!msgs)
+ return NULL;
+ for (size_t i = 0; i < num_messages; i++) {
+ if (init_message(&msgs[i])) {
+ free_messages(msgs, num_messages);
+ return NULL;
+ }
+ }
+ return msgs;
+}
- // Resources that are going to be written by the main thread
- LIST_HEAD(my_resources);
+static void
+main_writer_thread_destroy_ctx(struct main_writer_thread_ctx *ctx)
+{
+ free_messages(ctx->msgs, ctx->num_messages);
+ FREE(ctx->cur_chunk_tab);
+}
- list_add_tail(&next_lte->staging_list, &outstanding_resources);
- struct lookup_table_entry *cur_lte = next_lte;
- struct chunk_table *cur_chunk_tab = NULL;
- struct lookup_table_entry *lte;
- struct message *msg;
+static int
+main_writer_thread_init_ctx(struct main_writer_thread_ctx *ctx)
+{
+ /* Pre-allocate all the buffers that will be needed to do the chunk
+ * compression. */
+ ctx->msgs = allocate_messages(ctx->num_messages);
+ if (!ctx->msgs)
+ return WIMLIB_ERR_NOMEM;
-#ifdef WITH_NTFS_3G
- ntfs_inode *ni = NULL;
-#endif
+ /* Initially, all the messages are available to use. */
+ INIT_LIST_HEAD(&ctx->available_msgs);
+ for (size_t i = 0; i < ctx->num_messages; i++)
+ list_add_tail(&ctx->msgs[i].list, &ctx->available_msgs);
-#ifdef WITH_NTFS_3G
- ret = prepare_resource_for_read(next_lte, &ni);
-#else
- ret = prepare_resource_for_read(next_lte);
-#endif
+ /* outstanding_streams is the list of streams that currently have had
+ * chunks sent off for compression.
+ *
+ * The first stream in outstanding_streams is the stream that is
+ * currently being written (cur_lte).
+ *
+ * The last stream in outstanding_streams is the stream that is
+ * currently being read and chunks fed to the compressor threads. */
+ INIT_LIST_HEAD(&ctx->outstanding_streams);
- DEBUG("Initializing buffers for uncompressed "
- "and compressed data (%zu bytes needed)",
- queue_size * MAX_CHUNKS_PER_MSG * WIM_CHUNK_SIZE * 2);
+ /* Resources that don't need any chunks compressed are added to this
+ * list and written directly by the main thread. */
+ INIT_LIST_HEAD(&ctx->serial_streams);
- for (size_t i = 0; i < ARRAY_LEN(msgs); i++) {
- for (size_t j = 0; j < MAX_CHUNKS_PER_MSG; j++) {
- msgs[i].compressed_chunks[j] = MALLOC(WIM_CHUNK_SIZE);
- msgs[i].uncompressed_chunks[j] = MALLOC(WIM_CHUNK_SIZE);
- if (msgs[i].compressed_chunks[j] == NULL ||
- msgs[i].uncompressed_chunks[j] == NULL)
- {
- ERROR("Could not allocate enough memory for "
- "multi-threaded compression");
- ret = WIMLIB_ERR_NOMEM;
- goto out;
- }
- }
- }
+ ctx->cur_lte = NULL;
+ return 0;
+}
- while (1) {
- // Send chunks to the compressor threads until either (a) there
- // are no more messages available since they were all sent off,
- // or (b) there are no more resources that need to be
- // compressed.
- while (!list_empty(&available_msgs) && next_lte != NULL) {
-
- wimlib_assert(next_chunk < next_num_chunks);
-
- // Get a message from the available messages
- // list
- msg = container_of(available_msgs.next,
- struct message,
- list);
-
- // ... and delete it from the available messages
- // list
- list_del(&msg->list);
-
- // Initialize the message with the chunks to
- // compress.
- msg->num_chunks = min(next_num_chunks - next_chunk,
- MAX_CHUNKS_PER_MSG);
- msg->lte = next_lte;
- msg->complete = false;
- msg->begin_chunk = next_chunk;
-
- unsigned size = WIM_CHUNK_SIZE;
- for (unsigned i = 0; i < msg->num_chunks; i++) {
- if (next_chunk == next_num_chunks - 1 &&
- wim_resource_size(next_lte) % WIM_CHUNK_SIZE != 0)
- {
- size = wim_resource_size(next_lte) % WIM_CHUNK_SIZE;
- }
+static int
+receive_compressed_chunks(struct main_writer_thread_ctx *ctx)
+{
+ struct message *msg;
+ struct wim_lookup_table_entry *cur_lte;
+ int ret;
- DEBUG2("Read resource (size=%u, offset=%zu)",
- size, next_chunk * WIM_CHUNK_SIZE);
+ wimlib_assert(!list_empty(&ctx->outstanding_streams));
- msg->uncompressed_chunk_sizes[i] = size;
+ /* Get the next message from the queue and process it.
+ * The message will contain 1 or more data chunks that have been
+ * compressed. */
+ msg = shared_queue_get(ctx->compressed_res_queue);
+ msg->complete = true;
+ cur_lte = ctx->cur_lte;
- ret = read_wim_resource(next_lte,
- msg->uncompressed_chunks[i],
- size,
- next_chunk * WIM_CHUNK_SIZE,
- 0);
- if (ret != 0)
- goto out;
- sha1_update(&next_sha_ctx,
- msg->uncompressed_chunks[i], size);
- next_chunk++;
- }
+ /* Is this the next chunk in the current resource? If it's not
+ * (i.e., an earlier chunk in a same or different resource
+ * hasn't been compressed yet), do nothing, and keep this
+ * message around until all earlier chunks are received.
+ *
+ * Otherwise, write all the chunks we can. */
+ while (cur_lte != NULL &&
+ !list_empty(&cur_lte->msg_list) &&
+ (msg = container_of(cur_lte->msg_list.next,
+ struct message,
+ list))->complete)
+ {
+ if (msg->begin_chunk == 0) {
- // Send the compression request
- list_add_tail(&msg->list, &next_lte->msg_list);
- shared_queue_put(res_to_compress_queue, msg);
- DEBUG2("Compression request sent");
-
- if (next_chunk != next_num_chunks)
- // More chunks to send for this resource
- continue;
-
- // Done sending compression requests for a resource!
- // Check the SHA1 message digest.
- DEBUG2("Finalize SHA1 md (next_num_chunks=%zu)", next_num_chunks);
- sha1_final(next_hash, &next_sha_ctx);
- if (!hashes_equal(next_lte->hash, next_hash)) {
- ERROR("WIM resource has incorrect hash!");
- if (next_lte->resource_location == RESOURCE_IN_FILE_ON_DISK) {
- ERROR("We were reading it from `%s'; maybe it changed "
- "while we were reading it.",
- next_lte->file_on_disk);
- }
- ret = WIMLIB_ERR_INVALID_RESOURCE_HASH;
+ /* This is the first set of chunks. Leave space
+ * for the chunk table in the output file. */
+ off_t cur_offset = ftello(ctx->out_fp);
+ if (cur_offset == -1) {
+ ret = WIMLIB_ERR_WRITE;
goto out;
}
-
- // Advance to the next resource.
- //
- // If the next resource needs no compression,
- // just write it with this thread (not now
- // though--- we could be in the middle of
- // writing another resource.) Keep doing this
- // until we either get to the end of the
- // resources list, or we get to a resource that
- // needs compression.
-
- while (1) {
- if (next_resource == stream_list) {
- next_lte = NULL;
- break;
- }
- #ifdef WITH_NTFS_3G
- end_wim_resource_read(next_lte, ni);
- ni = NULL;
- #else
- end_wim_resource_read(next_lte);
- #endif
-
- next_lte = container_of(next_resource,
- struct lookup_table_entry,
- staging_list);
- next_resource = next_resource->next;
- if ((next_lte->resource_location == RESOURCE_IN_WIM
- && wimlib_get_compression_type(next_lte->wim) == out_ctype)
- || wim_resource_size(next_lte) == 0)
- {
- list_add_tail(&next_lte->staging_list,
- &my_resources);
- } else {
- list_add_tail(&next_lte->staging_list,
- &outstanding_resources);
- next_chunk = 0;
- next_num_chunks = wim_resource_chunks(next_lte);
- sha1_init(&next_sha_ctx);
- INIT_LIST_HEAD(&next_lte->msg_list);
- #ifdef WITH_NTFS_3G
- ret = prepare_resource_for_read(next_lte, &ni);
- #else
- ret = prepare_resource_for_read(next_lte);
- #endif
- if (ret != 0)
- goto out;
- DEBUG2("Updated next_lte");
- break;
- }
- }
+ ret = begin_wim_resource_chunk_tab(cur_lte,
+ ctx->out_fp,
+ cur_offset,
+ &ctx->cur_chunk_tab);
+ if (ret)
+ goto out;
}
- // If there are no outstanding resources, there are no more
- // resources to compress.
- if (list_empty(&outstanding_resources)) {
- DEBUG("No outstanding resources! Done");
- ret = 0;
+ /* Write the compressed chunks from the message. */
+ ret = write_wim_chunks(msg, ctx->out_fp, ctx->cur_chunk_tab);
+ if (ret)
goto out;
- }
- // Get the next message from the queue and process it.
- // The message will contain 1 or more data chunks that have been
- // compressed.
- DEBUG2("Waiting for message");
- msg = shared_queue_get(compressed_res_queue);
- msg->complete = true;
+ list_del(&msg->list);
- DEBUG2("Received msg (begin_chunk=%"PRIu64")", msg->begin_chunk);
+ /* This message is available to use for different chunks
+ * now. */
+ list_add(&msg->list, &ctx->available_msgs);
- list_for_each_entry(msg, &cur_lte->msg_list, list) {
- DEBUG2("complete=%d", msg->complete);
- }
-
- // Is this the next chunk in the current resource? If it's not
- // (i.e., an earlier chunk in a same or different resource
- // hasn't been compressed yet), do nothing, and keep this
- // message around until all earlier chunks are received.
- //
- // Otherwise, write all the chunks we can.
- while (!list_empty(&cur_lte->msg_list)
- && (msg = container_of(cur_lte->msg_list.next,
- struct message,
- list))->complete)
+ /* Was this the last chunk of the stream? If so, finish
+ * it. */
+ if (list_empty(&cur_lte->msg_list) &&
+ msg->begin_chunk + msg->num_chunks == ctx->cur_chunk_tab->num_chunks)
{
- DEBUG2("Complete msg (begin_chunk=%"PRIu64")", msg->begin_chunk);
- if (msg->begin_chunk == 0) {
- DEBUG2("Begin chunk tab");
- // This is the first set of chunks.
- // Leave space for the chunk table in
- // the output file.
- off_t cur_offset = ftello(out_fp);
- if (cur_offset == -1) {
- ret = WIMLIB_ERR_WRITE;
- goto out;
- }
- FREE(cur_chunk_tab);
- cur_chunk_tab = NULL;
- ret = begin_wim_resource_chunk_tab(cur_lte,
- out_fp,
- cur_offset,
- &cur_chunk_tab);
- if (ret != 0)
- goto out;
- }
- ret = write_wim_chunks(msg, out_fp, cur_chunk_tab);
- if (ret != 0)
+ DEBUG2("Finish wim chunk tab");
+ u64 res_csize;
+ ret = finish_wim_resource_chunk_tab(ctx->cur_chunk_tab,
+ ctx->out_fp,
+ &res_csize);
+ if (ret)
goto out;
- list_del(&msg->list);
- list_add(&msg->list, &available_msgs);
-
- if (list_empty(&cur_lte->msg_list) &&
- msg->begin_chunk + msg->num_chunks == cur_chunk_tab->num_chunks)
+#if 0
+ if (res_csize >= wim_resource_size(cur_lte)) {
+ /* Oops! We compressed the resource to
+ * larger than the original size. Write
+ * the resource uncompressed instead. */
+ ret = write_uncompressed_resource_and_truncate(
+ cur_lte,
+ ctx->out_fp,
+ ctx->cur_chunk_tab->file_offset,
+ &cur_lte->output_resource_entry);
+ if (ret)
+ goto out;
+ } else
+#endif
{
- DEBUG2("Finish wim chunk tab");
- u64 res_csize;
- ret = finish_wim_resource_chunk_tab(cur_chunk_tab,
- out_fp,
- &res_csize);
- if (ret != 0)
- return ret;
-
cur_lte->output_resource_entry.size =
res_csize;
cur_lte->resource_entry.original_size;
cur_lte->output_resource_entry.offset =
- cur_chunk_tab->file_offset;
+ ctx->cur_chunk_tab->file_offset;
cur_lte->output_resource_entry.flags =
cur_lte->resource_entry.flags |
WIM_RESHDR_FLAG_COMPRESSED;
+ }
+ do_write_streams_progress(ctx->progress, ctx->progress_func,
+ wim_resource_size(cur_lte));
+ FREE(ctx->cur_chunk_tab);
+ ctx->cur_chunk_tab = NULL;
+
+ struct list_head *next = cur_lte->write_streams_list.next;
+ list_del(&cur_lte->write_streams_list);
+
+ if (next == &ctx->outstanding_streams)
+ cur_lte = NULL;
+ else
+ cur_lte = container_of(cur_lte->write_streams_list.next,
+ struct wim_lookup_table_entry,
+ write_streams_list);
+
+ /* Since we just finished writing a stream, write any
+ * streams that have been added to the serial_streams
+ * list for direct writing by the main thread (e.g.
+ * resources that don't need to be compressed because
+ * the desired compression type is the same as the
+ * previous compression type). */
+ ret = do_write_stream_list(&ctx->serial_streams,
+ ctx->lookup_table,
+ ctx->out_fp,
+ ctx->out_ctype,
+ ctx->progress_func,
+ ctx->progress,
+ 0);
+ if (ret)
+ goto out;
+ }
+ }
+out:
+ ctx->cur_lte = cur_lte;
+ return ret;
+}
- struct list_head *next = cur_lte->staging_list.next;
- list_del(&cur_lte->staging_list);
+static int
+main_writer_thread_cb(const void *chunk, size_t chunk_size, void *_ctx)
+{
+ struct main_writer_thread_ctx *ctx = _ctx;
+ int ret;
+ struct message *next_msg;
- if (next == &outstanding_resources) {
- DEBUG("No more outstanding resources");
- ret = 0;
- goto out;
- } else {
- cur_lte = container_of(cur_lte->staging_list.next,
- struct lookup_table_entry,
- staging_list);
- }
+ next_msg = ctx->next_msg;
- struct lookup_table_entry *tmp;
- list_for_each_entry_safe(lte,
- tmp,
- &my_resources,
- staging_list)
- {
- ret = write_wim_resource(lte,
- out_fp,
- out_ctype,
- <e->output_resource_entry,
- 0);
- list_del(<e->staging_list);
- if (ret != 0)
- goto out;
- }
- }
+ sha1_update(&ctx->sha_ctx, chunk, chunk_size);
+
+ if (!next_msg) {
+ if (list_empty(&ctx->available_msgs)) {
+ ret = receive_compressed_chunks(ctx);
+ if (ret)
+ return ret;
}
+
+ wimlib_assert(!list_empty(&ctx->available_msgs));
+
+ next_msg = container_of(ctx->available_msgs.next,
+ struct message,
+ list);
+ list_del(&next_msg->list);
+ next_msg->complete = false;
+ next_msg->begin_chunk = ctx->next_chunk;
+ next_msg->num_chunks = min(MAX_CHUNKS_PER_MSG,
+ ctx->next_num_chunks - ctx->next_chunk);
+ ctx->next_chunk_in_msg = 0;
}
-out:
-#ifdef WITH_NTFS_3G
- end_wim_resource_read(cur_lte, ni);
-#else
- end_wim_resource_read(cur_lte);
-#endif
- if (ret == 0) {
- list_for_each_entry(lte, &my_resources, staging_list) {
- ret = write_wim_resource(lte, out_fp,
- out_ctype,
- <e->output_resource_entry,
- 0);
- if (ret != 0)
- break;
- }
- } else {
- size_t num_available_msgs = 0;
- struct list_head *cur;
+ wimlib_assert(next_msg != NULL);
+ wimlib_assert(ctx->next_chunk_in_msg < next_msg->num_chunks);
- list_for_each(cur, &available_msgs) {
- num_available_msgs++;
- }
+ next_msg->uncompressed_chunk_sizes[ctx->next_chunk_in_msg] = chunk_size;
+ memcpy(next_msg->uncompressed_chunks[ctx->next_chunk_in_msg],
+ chunk, chunk_size);
- while (num_available_msgs < ARRAY_LEN(msgs)) {
- msg = shared_queue_get(compressed_res_queue);
- num_available_msgs++;
- }
+ if (++ctx->next_chunk_in_msg == next_msg->num_chunks) {
+ shared_queue_put(ctx->res_to_compress_queue,
+ next_msg);
+ ctx->next_msg = NULL;
}
+ return 0;
+}
- DEBUG("Freeing messages");
+static int
+submit_stream_for_compression(struct wim_lookup_table_entry *lte,
+ struct main_writer_thread_ctx *ctx)
+{
+ int ret;
+
+ sha1_init(&ctx->sha_ctx);
+ ctx->next_num_chunks = wim_resource_chunks(lte);
+ ret = read_resource_prefix(lte, wim_resource_size(lte),
+ main_writer_thread_cb, ctx, 0);
+ if (ret)
+ return ret;
+ ret = finalize_and_check_sha1(&ctx->sha_ctx, lte);
+ if (ret)
+ return ret;
+}
+
+/*
+ * This function is executed by the main thread when the resources are being
+ * compressed in parallel. The main thread is in change of all reading of the
+ * uncompressed data and writing of the compressed data. The compressor threads
+ * *only* do compression from/to in-memory buffers.
+ *
+ * Each unit of work given to a compressor thread is up to MAX_CHUNKS_PER_MSG
+ * chunks of compressed data to compress, represented in a `struct message'.
+ * Each message is passed from the main thread to a worker thread through the
+ * res_to_compress_queue, and it is passed back through the
+ * compressed_res_queue.
+ */
+static int
+main_writer_thread_proc(struct main_writer_thread_ctx *ctx)
+{
+ int ret;
+ struct list_head *stream_list;
+ struct wim_lookup_table_entry *lte;
+
+ ret = main_writer_thread_init_ctx(ctx);
+ if (ret)
+ goto out_destroy_ctx;
+
+ stream_list = ctx->stream_list;
+ while (!list_empty(stream_list)) {
+ lte = container_of(stream_list->next,
+ struct wim_lookup_table_entry,
+ write_streams_list);
+ list_del(<e->write_streams_list);
+ if (lte->unhashed && !lte->unique_size) {
+ struct wim_lookup_table_entry *tmp;
+ u32 orig_refcnt = lte->out_refcnt;
+
+ ret = hash_unhashed_stream(lte, ctx->lookup_table, &tmp);
+ if (ret)
+ goto out_destroy_ctx;
+ if (tmp != lte) {
+ lte = tmp;
+ if (orig_refcnt != tmp->out_refcnt) {
+ DEBUG("Discarding duplicate stream of length %"PRIu64,
+ wim_resource_size(lte));
+ goto skip_to_progress;
+ }
+ }
+ }
- for (size_t i = 0; i < ARRAY_LEN(msgs); i++) {
- for (size_t j = 0; j < MAX_CHUNKS_PER_MSG; j++) {
- FREE(msgs[i].compressed_chunks[j]);
- FREE(msgs[i].uncompressed_chunks[j]);
+ if (wim_resource_size(lte) < 1000 ||
+ ctx->out_ctype == WIMLIB_COMPRESSION_TYPE_NONE ||
+ (lte->resource_location == RESOURCE_IN_WIM &&
+ wimlib_get_compression_type(lte->wim) == ctx->out_ctype))
+ {
+ list_add(<e->write_streams_list,
+ &ctx->serial_streams);
+ } else {
+ ret = submit_stream_for_compression(lte, ctx);
+ if (ret)
+ goto out_destroy_ctx;
+ if (lte->unhashed) {
+ list_del(<e->unhashed_list);
+ lookup_table_insert(ctx->lookup_table, lte);
+ lte->unhashed = 0;
+ }
}
+ skip_to_progress:
+ do_write_streams_progress(ctx->progress,
+ ctx->progress_func,
+ wim_resource_size(lte));
}
- if (cur_chunk_tab != NULL)
- FREE(cur_chunk_tab);
+ while (!list_empty(&ctx->outstanding_streams)) {
+ ret = receive_compressed_chunks(ctx);
+ if (ret)
+ goto out_destroy_ctx;
+ }
+ ret = 0;
+out_destroy_ctx:
+ main_writer_thread_destroy_ctx(ctx);
return ret;
}
-static int write_stream_list_parallel(struct list_head *stream_list,
- FILE *out_fp, int out_ctype,
- int write_flags)
+static long
+get_default_num_threads()
+{
+#ifdef __WIN32__
+ return win32_get_number_of_processors();
+#else
+ return sysconf(_SC_NPROCESSORS_ONLN);
+#endif
+}
+
+static int
+write_stream_list_parallel(struct list_head *stream_list,
+ struct wim_lookup_table *lookup_table,
+ FILE *out_fp,
+ int out_ctype,
+ int write_flags,
+ unsigned num_threads,
+ wimlib_progress_func_t progress_func,
+ union wimlib_progress_info *progress)
{
int ret;
- long nthreads;
struct shared_queue res_to_compress_queue;
struct shared_queue compressed_res_queue;
+ pthread_t *compressor_threads = NULL;
- nthreads = sysconf(_SC_NPROCESSORS_ONLN);
- if (nthreads < 1) {
- WARNING("Could not determine number of processors! Assuming 1");
- goto out_serial;
+ if (num_threads == 0) {
+ long nthreads = get_default_num_threads();
+ if (nthreads < 1 || nthreads > UINT_MAX) {
+ WARNING("Could not determine number of processors! Assuming 1");
+ goto out_serial;
+ } else {
+ num_threads = nthreads;
+ }
}
- wimlib_assert(stream_list->next != stream_list);
+ progress->write_streams.num_threads = num_threads;
- {
- pthread_t compressor_threads[nthreads];
+ static const double MESSAGES_PER_THREAD = 2.0;
+ size_t queue_size = (size_t)(num_threads * MESSAGES_PER_THREAD);
- static const double MESSAGES_PER_THREAD = 2.0;
- size_t queue_size = (size_t)(nthreads * MESSAGES_PER_THREAD);
+ DEBUG("Initializing shared queues (queue_size=%zu)", queue_size);
- DEBUG("Initializing shared queues (queue_size=%zu)", queue_size);
+ ret = shared_queue_init(&res_to_compress_queue, queue_size);
+ if (ret != 0)
+ goto out_serial;
- ret = shared_queue_init(&res_to_compress_queue, queue_size);
- if (ret != 0)
- goto out_serial;
+ ret = shared_queue_init(&compressed_res_queue, queue_size);
+ if (ret != 0)
+ goto out_destroy_res_to_compress_queue;
- ret = shared_queue_init(&compressed_res_queue, queue_size);
- if (ret != 0)
- goto out_destroy_res_to_compress_queue;
-
-
- struct compressor_thread_params params;
- params.res_to_compress_queue = &res_to_compress_queue;
- params.compressed_res_queue = &compressed_res_queue;
- params.compress = get_compress_func(out_ctype);
-
- for (long i = 0; i < nthreads; i++) {
- DEBUG("pthread_create thread %ld", i);
- ret = pthread_create(&compressor_threads[i], NULL,
- compressor_thread_proc, ¶ms);
- if (ret != 0) {
- ERROR_WITH_ERRNO("Failed to create compressor "
- "thread %ld", i);
- nthreads = i;
- goto out_join;
- }
- }
+ struct compressor_thread_params params;
+ params.res_to_compress_queue = &res_to_compress_queue;
+ params.compressed_res_queue = &compressed_res_queue;
+ params.compress = get_compress_func(out_ctype);
+
+ compressor_threads = MALLOC(num_threads * sizeof(pthread_t));
+ if (!compressor_threads) {
+ ret = WIMLIB_ERR_NOMEM;
+ goto out_destroy_compressed_res_queue;
+ }
- if (write_flags & WIMLIB_WRITE_FLAG_VERBOSE) {
- printf("Writing compressed data using %ld threads...\n",
- nthreads);
+ for (unsigned i = 0; i < num_threads; i++) {
+ DEBUG("pthread_create thread %u", i);
+ ret = pthread_create(&compressor_threads[i], NULL,
+ compressor_thread_proc, ¶ms);
+ if (ret != 0) {
+ ret = -1;
+ ERROR_WITH_ERRNO("Failed to create compressor "
+ "thread %u", i);
+ num_threads = i;
+ goto out_join;
}
+ }
- ret = main_writer_thread_proc(stream_list,
- out_fp,
- out_ctype,
- &res_to_compress_queue,
- &compressed_res_queue,
- queue_size);
-
- out_join:
- for (long i = 0; i < nthreads; i++)
- shared_queue_put(&res_to_compress_queue, NULL);
-
- for (long i = 0; i < nthreads; i++) {
- if (pthread_join(compressor_threads[i], NULL)) {
- WARNING("Failed to join compressor thread %ld: %s",
- i, strerror(errno));
- }
+ if (progress_func)
+ progress_func(WIMLIB_PROGRESS_MSG_WRITE_STREAMS, progress);
+
+ struct main_writer_thread_ctx ctx;
+ memset(&ctx, 0, sizeof(ctx));
+ ctx.stream_list = stream_list;
+ ctx.lookup_table = lookup_table;
+ ctx.out_fp = out_fp;
+ ctx.out_ctype = out_ctype;
+ ctx.res_to_compress_queue = &res_to_compress_queue;
+ ctx.compressed_res_queue = &compressed_res_queue;
+ ctx.num_messages = queue_size;
+ ctx.write_flags = write_flags;
+ ctx.progress_func = progress_func;
+ ctx.progress = progress;
+ ret = main_writer_thread_proc(&ctx);
+out_join:
+ for (unsigned i = 0; i < num_threads; i++)
+ shared_queue_put(&res_to_compress_queue, NULL);
+
+ for (unsigned i = 0; i < num_threads; i++) {
+ if (pthread_join(compressor_threads[i], NULL)) {
+ WARNING_WITH_ERRNO("Failed to join compressor "
+ "thread %u", i);
}
}
+ FREE(compressor_threads);
+out_destroy_compressed_res_queue:
shared_queue_destroy(&compressed_res_queue);
out_destroy_res_to_compress_queue:
shared_queue_destroy(&res_to_compress_queue);
return ret;
out_serial:
WARNING("Falling back to single-threaded compression");
- return write_stream_list_serial(stream_list, out_fp,
- out_ctype, write_flags);
+ return write_stream_list_serial(stream_list,
+ lookup_table,
+ out_fp,
+ out_ctype,
+ write_flags,
+ progress_func,
+ progress);
+
}
+#endif
-static int write_stream_list(struct list_head *stream_list, FILE *out_fp,
- int out_ctype, int write_flags)
+/*
+ * Write a list of streams to a WIM (@out_fp) using the compression type
+ * @out_ctype and up to @num_threads compressor threads.
+ */
+static int
+write_stream_list(struct list_head *stream_list,
+ struct wim_lookup_table *lookup_table,
+ FILE *out_fp, int out_ctype, int write_flags,
+ unsigned num_threads, wimlib_progress_func_t progress_func)
{
- struct lookup_table_entry *lte;
+ struct wim_lookup_table_entry *lte;
size_t num_streams = 0;
- u64 total_size = 0;
- bool compression_needed = false;
+ u64 total_bytes = 0;
+ u64 total_compression_bytes = 0;
+ union wimlib_progress_info progress;
+ int ret;
+
+ if (list_empty(stream_list))
+ return 0;
- list_for_each_entry(lte, stream_list, staging_list) {
+ /* Calculate the total size of the streams to be written. Note: this
+ * will be the uncompressed size, as we may not know the compressed size
+ * yet, and also this will assume that every unhashed stream will be
+ * written (which will not necessarily be the case). */
+ list_for_each_entry(lte, stream_list, write_streams_list) {
num_streams++;
- total_size += wim_resource_size(lte);
- if (!compression_needed
- && out_ctype != WIM_COMPRESSION_TYPE_NONE
- && (lte->resource_location != RESOURCE_IN_WIM
- || wimlib_get_compression_type(lte->wim) != out_ctype)
- && wim_resource_size(lte) != 0)
- compression_needed = true;
- }
-
- if (write_flags & WIMLIB_WRITE_FLAG_VERBOSE) {
- printf("Preparing to write %zu streams "
- "(%"PRIu64" total bytes uncompressed)\n",
- num_streams, total_size);
- printf("Using compression type %s\n",
- wimlib_get_compression_type_string(out_ctype));
- }
-
- if (compression_needed && total_size >= 0) { // XXX
- return write_stream_list_parallel(stream_list, out_fp,
- out_ctype, write_flags);
- } else {
- if (write_flags & WIMLIB_WRITE_FLAG_VERBOSE) {
- puts("Using 1 thread (no compression needed)");
+ total_bytes += wim_resource_size(lte);
+ if (out_ctype != WIMLIB_COMPRESSION_TYPE_NONE
+ && (wim_resource_compression_type(lte) != out_ctype ||
+ (write_flags & WIMLIB_WRITE_FLAG_RECOMPRESS)))
+ {
+ total_compression_bytes += wim_resource_size(lte);
}
+ }
+ progress.write_streams.total_bytes = total_bytes;
+ progress.write_streams.total_streams = num_streams;
+ progress.write_streams.completed_bytes = 0;
+ progress.write_streams.completed_streams = 0;
+ progress.write_streams.num_threads = num_threads;
+ progress.write_streams.compression_type = out_ctype;
+ progress.write_streams._private = 0;
+
+#ifdef ENABLE_MULTITHREADED_COMPRESSION
+ if (total_compression_bytes >= 1000000 && num_threads != 1)
+ ret = write_stream_list_parallel(stream_list,
+ lookup_table,
+ out_fp,
+ out_ctype,
+ write_flags,
+ num_threads,
+ progress_func,
+ &progress);
+ else
+#endif
+ ret = write_stream_list_serial(stream_list,
+ lookup_table,
+ out_fp,
+ out_ctype,
+ write_flags,
+ progress_func,
+ &progress);
+ return ret;
+}
+
+struct stream_size_table {
+ struct hlist_head *array;
+ size_t num_entries;
+ size_t capacity;
+};
+
+static int
+init_stream_size_table(struct stream_size_table *tab, size_t capacity)
+{
+ tab->array = CALLOC(capacity, sizeof(tab->array[0]));
+ if (!tab->array)
+ return WIMLIB_ERR_NOMEM;
+ tab->num_entries = 0;
+ tab->capacity = capacity;
+ return 0;
+}
- return write_stream_list_serial(stream_list, out_fp,
- out_ctype, write_flags);
+static void
+destroy_stream_size_table(struct stream_size_table *tab)
+{
+ FREE(tab->array);
+}
+
+static int
+stream_size_table_insert(struct wim_lookup_table_entry *lte, void *_tab)
+{
+ struct stream_size_table *tab = _tab;
+ size_t pos;
+ struct wim_lookup_table_entry *hashed_lte;
+ struct hlist_node *tmp;
+
+ pos = hash_u64(wim_resource_size(lte)) % tab->capacity;
+ lte->unique_size = 1;
+ hlist_for_each_entry(hashed_lte, tmp, &tab->array[pos], hash_list_2) {
+ if (wim_resource_size(hashed_lte) == wim_resource_size(lte)) {
+ lte->unique_size = 0;
+ hashed_lte->unique_size = 0;
+ break;
+ }
}
+
+ hlist_add_head(<e->hash_list_2, &tab->array[pos]);
+ tab->num_entries++;
+ return 0;
}
-static int dentry_find_streams_to_write(struct dentry *dentry,
- void *wim)
+struct lte_overwrite_prepare_args {
+ WIMStruct *wim;
+ off_t end_offset;
+ struct list_head stream_list;
+ struct stream_size_table stream_size_tab;
+};
+
+static int
+lte_overwrite_prepare(struct wim_lookup_table_entry *lte, void *arg)
{
- WIMStruct *w = wim;
- struct list_head *stream_list = w->private;
- struct lookup_table_entry *lte;
- for (unsigned i = 0; i <= dentry->d_inode->num_ads; i++) {
- lte = inode_stream_lte(dentry->d_inode, i, w->lookup_table);
- if (lte && ++lte->out_refcnt == 1)
- list_add(<e->staging_list, stream_list);
+ struct lte_overwrite_prepare_args *args = arg;
+
+ if (lte->resource_location == RESOURCE_IN_WIM &&
+ lte->wim == args->wim)
+ {
+ /* We can't do an in place overwrite on the WIM if there are
+ * streams after the XML data. */
+ if (lte->resource_entry.offset +
+ lte->resource_entry.size > args->end_offset)
+ {
+ #ifdef ENABLE_ERROR_MESSAGES
+ ERROR("The following resource is after the XML data:");
+ print_lookup_table_entry(lte, stderr);
+ #endif
+ return WIMLIB_ERR_RESOURCE_ORDER;
+ }
+ } else {
+ wimlib_assert(!(lte->resource_entry.flags & WIM_RESHDR_FLAG_METADATA));
+ list_add_tail(<e->write_streams_list, &args->stream_list);
}
+ lte->out_refcnt = lte->refcnt;
+ stream_size_table_insert(lte, &args->stream_size_tab);
return 0;
}
-static int find_streams_to_write(WIMStruct *w)
+static int
+lte_set_output_res_entry(struct wim_lookup_table_entry *lte, void *_wim)
{
- return for_dentry_in_tree(wim_root_dentry(w),
- dentry_find_streams_to_write, w);
+ if (lte->resource_location == RESOURCE_IN_WIM && lte->wim == _wim) {
+ copy_resource_entry(<e->output_resource_entry,
+ <e->resource_entry);
+ }
+ return 0;
}
-static int write_wim_streams(WIMStruct *w, int image, int write_flags)
+/* Given a WIM that we are going to overwrite in place with zero or more
+ * additional streams added, construct a list the list of new unique streams
+ * ('struct wim_lookup_table_entry's) that must be written, plus any unhashed
+ * streams that need to be added but may be identical to other hashed or
+ * unhashed streams. These unhashed streams are checksummed while the streams
+ * are being written. To aid this process, the member @unique_size is set to 1
+ * on streams that have a unique size and therefore must be written.
+ *
+ * The out_refcnt member of each 'struct wim_lookup_table_entry' is set to
+ * indicate the number of times the stream is referenced in only the streams
+ * that are being written; this may still be adjusted later when unhashed
+ * streams are being resolved.
+ */
+static int
+prepare_streams_for_overwrite(WIMStruct *wim, off_t end_offset,
+ struct list_head *stream_list)
{
+ int ret;
+ struct lte_overwrite_prepare_args args;
- LIST_HEAD(stream_list);
+ args.wim = wim;
+ args.end_offset = end_offset;
+ ret = init_stream_size_table(&args.stream_size_tab,
+ wim->lookup_table->capacity);
+ if (ret)
+ return ret;
+
+ INIT_LIST_HEAD(&args.stream_list);
+ for (int i = 0; i < wim->hdr.image_count; i++) {
+ struct wim_image_metadata *imd;
+ struct wim_lookup_table_entry *lte;
- w->private = &stream_list;
- for_image(w, image, find_streams_to_write);
- return write_stream_list(&stream_list, w->out_fp,
- wimlib_get_compression_type(w), write_flags);
+ imd = wim->image_metadata[i];
+ image_for_each_unhashed_stream(lte, imd) {
+ ret = lte_overwrite_prepare(lte, &args);
+ if (ret)
+ goto out_destroy_stream_size_table;
+ }
+ }
+ ret = for_lookup_table_entry(wim->lookup_table,
+ lte_overwrite_prepare, &args);
+ if (ret)
+ goto out_destroy_stream_size_table;
+
+ for (int i = 0; i < wim->hdr.image_count; i++)
+ lte_set_output_res_entry(wim->image_metadata[i]->metadata_lte,
+ wim);
+ for_lookup_table_entry(wim->lookup_table, lte_set_output_res_entry, wim);
+ list_transfer(&args.stream_list, stream_list);
+out_destroy_stream_size_table:
+ destroy_stream_size_table(&args.stream_size_tab);
+ return ret;
}
-/*
- * Write the lookup table, xml data, and integrity table, then overwrite the WIM
- * header.
+
+struct find_streams_ctx {
+ struct list_head stream_list;
+ struct stream_size_table stream_size_tab;
+};
+
+static void
+inode_find_streams_to_write(struct wim_inode *inode,
+ struct wim_lookup_table *table,
+ struct list_head *stream_list,
+ struct stream_size_table *tab)
+{
+ struct wim_lookup_table_entry *lte;
+ for (unsigned i = 0; i <= inode->i_num_ads; i++) {
+ lte = inode_stream_lte(inode, i, table);
+ if (lte) {
+ if (lte->out_refcnt == 0) {
+ if (lte->unhashed)
+ stream_size_table_insert(lte, tab);
+ list_add_tail(<e->write_streams_list, stream_list);
+ }
+ lte->out_refcnt += inode->i_nlink;
+ }
+ }
+}
+
+static int
+image_find_streams_to_write(WIMStruct *w)
+{
+ struct find_streams_ctx *ctx;
+ struct wim_image_metadata *imd;
+ struct wim_inode *inode;
+ struct wim_lookup_table_entry *lte;
+
+ ctx = w->private;
+ imd = wim_get_current_image_metadata(w);
+
+ image_for_each_unhashed_stream(lte, imd)
+ lte->out_refcnt = 0;
+
+ /* Go through this image's inodes to find any streams that have not been
+ * found yet. */
+ image_for_each_inode(inode, imd) {
+ inode_find_streams_to_write(inode, w->lookup_table,
+ &ctx->stream_list,
+ &ctx->stream_size_tab);
+ }
+ return 0;
+}
+
+/* Given a WIM that from which one or all of the images is being written, build
+ * the list of unique streams ('struct wim_lookup_table_entry's) that must be
+ * written, plus any unhashed streams that need to be written but may be
+ * identical to other hashed or unhashed streams being written. These unhashed
+ * streams are checksummed while the streams are being written. To aid this
+ * process, the member @unique_size is set to 1 on streams that have a unique
+ * size and therefore must be written.
+ *
+ * The out_refcnt member of each 'struct wim_lookup_table_entry' is set to
+ * indicate the number of times the stream is referenced in only the streams
+ * that are being written; this may still be adjusted later when unhashed
+ * streams are being resolved.
*/
-int finish_write(WIMStruct *w, int image, int write_flags)
+static int
+prepare_stream_list(WIMStruct *wim, int image, struct list_head *stream_list)
{
- off_t lookup_table_offset;
- off_t xml_data_offset;
- off_t lookup_table_size;
- off_t integrity_offset;
- off_t xml_data_size;
- off_t end_offset;
- off_t integrity_size;
int ret;
- struct wim_header hdr;
- FILE *out = w->out_fp;
+ struct find_streams_ctx ctx;
- if (!(write_flags & WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE)) {
- /* Write the lookup table. */
- lookup_table_offset = ftello(out);
- if (lookup_table_offset == -1)
- return WIMLIB_ERR_WRITE;
+ for_lookup_table_entry(wim->lookup_table, lte_zero_out_refcnt, NULL);
+ ret = init_stream_size_table(&ctx.stream_size_tab,
+ wim->lookup_table->capacity);
+ if (ret)
+ return ret;
+ for_lookup_table_entry(wim->lookup_table, stream_size_table_insert,
+ &ctx.stream_size_tab);
+ INIT_LIST_HEAD(&ctx.stream_list);
+ wim->private = &ctx;
+ ret = for_image(wim, image, image_find_streams_to_write);
+ destroy_stream_size_table(&ctx.stream_size_tab);
+ if (ret == 0)
+ list_transfer(&ctx.stream_list, stream_list);
+ return ret;
+}
- DEBUG("Writing lookup table (offset %"PRIu64")",
- lookup_table_offset);
- ret = write_lookup_table(w->lookup_table, out);
- if (ret != 0)
- return ret;
- }
+/* Writes the streams for the specified @image in @wim to @wim->out_fp.
+ */
+static int
+write_wim_streams(WIMStruct *wim, int image, int write_flags,
+ unsigned num_threads,
+ wimlib_progress_func_t progress_func)
+{
+ int ret;
+ struct list_head stream_list;
- xml_data_offset = ftello(out);
- if (xml_data_offset == -1)
- return WIMLIB_ERR_WRITE;
+ ret = prepare_stream_list(wim, image, &stream_list);
+ if (ret)
+ return ret;
+ return write_stream_list(&stream_list,
+ wim->lookup_table,
+ wim->out_fp,
+ wimlib_get_compression_type(wim),
+ write_flags,
+ num_threads,
+ progress_func);
+}
+
+/*
+ * Finish writing a WIM file: write the lookup table, xml data, and integrity
+ * table (optional), then overwrite the WIM header.
+ *
+ * write_flags is a bitwise OR of the following:
+ *
+ * (public) WIMLIB_WRITE_FLAG_CHECK_INTEGRITY:
+ * Include an integrity table.
+ *
+ * (public) WIMLIB_WRITE_FLAG_SHOW_PROGRESS:
+ * Show progress information when (if) writing the integrity table.
+ *
+ * (private) WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE:
+ * Don't write the lookup table.
+ *
+ * (private) WIMLIB_WRITE_FLAG_REUSE_INTEGRITY_TABLE:
+ * When (if) writing the integrity table, re-use entries from the
+ * existing integrity table, if possible.
+ *
+ * (private) WIMLIB_WRITE_FLAG_CHECKPOINT_AFTER_XML:
+ * After writing the XML data but before writing the integrity
+ * table, write a temporary WIM header and flush the stream so that
+ * the WIM is less likely to become corrupted upon abrupt program
+ * termination.
+ *
+ * (private) WIMLIB_WRITE_FLAG_FSYNC:
+ * fsync() the output file before closing it.
+ *
+ */
+int
+finish_write(WIMStruct *w, int image, int write_flags,
+ wimlib_progress_func_t progress_func)
+{
+ int ret;
+ struct wim_header hdr;
+ FILE *out = w->out_fp;
/* @hdr will be the header for the new WIM. First copy all the data
* from the header in the WIMStruct; then set all the fields that may
* have changed, including the resource entries, boot index, and image
* count. */
memcpy(&hdr, &w->hdr, sizeof(struct wim_header));
+
+ /* Set image count and boot index correctly for single image writes */
+ if (image != WIMLIB_ALL_IMAGES) {
+ hdr.image_count = 1;
+ if (hdr.boot_idx == image)
+ hdr.boot_idx = 1;
+ else
+ hdr.boot_idx = 0;
+ }
+
+ /* In the WIM header, there is room for the resource entry for a
+ * metadata resource labeled as the "boot metadata". This entry should
+ * be zeroed out if there is no bootable image (boot_idx 0). Otherwise,
+ * it should be a copy of the resource entry for the image that is
+ * marked as bootable. This is not well documented... */
+ if (hdr.boot_idx == 0) {
+ zero_resource_entry(&hdr.boot_metadata_res_entry);
+ } else {
+ copy_resource_entry(&hdr.boot_metadata_res_entry,
+ &w->image_metadata[ hdr.boot_idx- 1
+ ]->metadata_lte->output_resource_entry);
+ }
+
if (!(write_flags & WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE)) {
- lookup_table_size = xml_data_offset - lookup_table_offset;
- hdr.lookup_table_res_entry.offset = lookup_table_offset;
- hdr.lookup_table_res_entry.size = lookup_table_size;
+ ret = write_lookup_table(w, image, &hdr.lookup_table_res_entry);
+ if (ret)
+ goto out_close_wim;
}
- hdr.lookup_table_res_entry.original_size = hdr.lookup_table_res_entry.size;
- hdr.lookup_table_res_entry.flags = WIM_RESHDR_FLAG_METADATA;
- DEBUG("Writing XML data (offset %"PRIu64")", xml_data_offset);
ret = write_xml_data(w->wim_info, image, out,
(write_flags & WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE) ?
- wim_info_get_total_bytes(w->wim_info) : 0);
- if (ret != 0)
- return ret;
-
- integrity_offset = ftello(out);
- if (integrity_offset == -1)
- return WIMLIB_ERR_WRITE;
- xml_data_size = integrity_offset - xml_data_offset;
-
- hdr.xml_res_entry.offset = xml_data_offset;
- hdr.xml_res_entry.size = xml_data_size;
- hdr.xml_res_entry.original_size = xml_data_size;
- hdr.xml_res_entry.flags = 0;
+ wim_info_get_total_bytes(w->wim_info) : 0,
+ &hdr.xml_res_entry);
+ if (ret)
+ goto out_close_wim;
if (write_flags & WIMLIB_WRITE_FLAG_CHECK_INTEGRITY) {
- ret = write_integrity_table(out, WIM_HEADER_DISK_SIZE,
- xml_data_offset,
- write_flags & WIMLIB_WRITE_FLAG_SHOW_PROGRESS);
- if (ret != 0)
- return ret;
- end_offset = ftello(out);
- if (end_offset == -1)
- return WIMLIB_ERR_WRITE;
- integrity_size = end_offset - integrity_offset;
- hdr.integrity.offset = integrity_offset;
- hdr.integrity.size = integrity_size;
- hdr.integrity.original_size = integrity_size;
- } else {
- hdr.integrity.offset = 0;
- hdr.integrity.size = 0;
- hdr.integrity.original_size = 0;
- }
- hdr.integrity.flags = 0;
+ if (write_flags & WIMLIB_WRITE_FLAG_CHECKPOINT_AFTER_XML) {
+ struct wim_header checkpoint_hdr;
+ memcpy(&checkpoint_hdr, &hdr, sizeof(struct wim_header));
+ zero_resource_entry(&checkpoint_hdr.integrity);
+ if (fseeko(out, 0, SEEK_SET)) {
+ ERROR_WITH_ERRNO("Failed to seek to beginning "
+ "of WIM being written");
+ ret = WIMLIB_ERR_WRITE;
+ goto out_close_wim;
+ }
+ ret = write_header(&checkpoint_hdr, out);
+ if (ret)
+ goto out_close_wim;
- DEBUG("Updating WIM header.");
+ if (fflush(out) != 0) {
+ ERROR_WITH_ERRNO("Can't write data to WIM");
+ ret = WIMLIB_ERR_WRITE;
+ goto out_close_wim;
+ }
- /*
- * In the WIM header, there is room for the resource entry for a
- * metadata resource labeled as the "boot metadata". This entry should
- * be zeroed out if there is no bootable image (boot_idx 0). Otherwise,
- * it should be a copy of the resource entry for the image that is
- * marked as bootable. This is not well documented...
- */
- if (hdr.boot_idx == 0 || !w->image_metadata
- || (image != WIM_ALL_IMAGES && image != hdr.boot_idx)) {
- memset(&hdr.boot_metadata_res_entry, 0,
- sizeof(struct resource_entry));
+ if (fseeko(out, 0, SEEK_END) != 0) {
+ ERROR_WITH_ERRNO("Failed to seek to end "
+ "of WIM being written");
+ ret = WIMLIB_ERR_WRITE;
+ goto out_close_wim;
+ }
+ }
+
+ off_t old_lookup_table_end;
+ off_t new_lookup_table_end;
+ if (write_flags & WIMLIB_WRITE_FLAG_REUSE_INTEGRITY_TABLE) {
+ old_lookup_table_end = w->hdr.lookup_table_res_entry.offset +
+ w->hdr.lookup_table_res_entry.size;
+ } else {
+ old_lookup_table_end = 0;
+ }
+ new_lookup_table_end = hdr.lookup_table_res_entry.offset +
+ hdr.lookup_table_res_entry.size;
+
+ ret = write_integrity_table(out,
+ &hdr.integrity,
+ new_lookup_table_end,
+ old_lookup_table_end,
+ progress_func);
+ if (ret)
+ goto out_close_wim;
} else {
- memcpy(&hdr.boot_metadata_res_entry,
- &w->image_metadata[
- hdr.boot_idx - 1].metadata_lte->output_resource_entry,
- sizeof(struct resource_entry));
+ zero_resource_entry(&hdr.integrity);
}
- /* Set image count and boot index correctly for single image writes */
- if (image != WIM_ALL_IMAGES) {
- hdr.image_count = 1;
- if (hdr.boot_idx == image)
- hdr.boot_idx = 1;
- else
- hdr.boot_idx = 0;
+ if (fseeko(out, 0, SEEK_SET) != 0) {
+ ERROR_WITH_ERRNO("Failed to seek to beginning of WIM "
+ "being written");
+ ret = WIMLIB_ERR_WRITE;
+ goto out_close_wim;
}
-
- if (fseeko(out, 0, SEEK_SET) != 0)
- return WIMLIB_ERR_WRITE;
-
ret = write_header(&hdr, out);
- if (ret != 0)
- return ret;
+ if (ret)
+ goto out_close_wim;
- DEBUG("Closing output file.");
- wimlib_assert(w->out_fp != NULL);
- if (fclose(w->out_fp) != 0) {
- ERROR_WITH_ERRNO("Failed to close the WIM file");
- ret = WIMLIB_ERR_WRITE;
+ if (write_flags & WIMLIB_WRITE_FLAG_FSYNC) {
+ if (fflush(out) != 0
+ || fsync(fileno(out)) != 0)
+ {
+ ERROR_WITH_ERRNO("Error flushing data to WIM file");
+ ret = WIMLIB_ERR_WRITE;
+ }
+ }
+out_close_wim:
+ if (fclose(out) != 0) {
+ ERROR_WITH_ERRNO("Failed to close the output WIM file");
+ if (ret == 0)
+ ret = WIMLIB_ERR_WRITE;
}
w->out_fp = NULL;
return ret;
}
-/* Open file stream and write dummy header for WIM. */
-int begin_write(WIMStruct *w, const char *path, int write_flags)
+#if defined(HAVE_SYS_FILE_H) && defined(HAVE_FLOCK)
+int
+lock_wim(WIMStruct *w, FILE *fp)
{
- const char *mode;
- DEBUG("Opening `%s' for new WIM", path);
-
- /* checking the integrity requires going back over the file to read it.
- * XXX
- * (It also would be possible to keep a running sha1sum as the file is
- * written-- this would be faster, but a bit more complicated) */
- if (write_flags & WIMLIB_WRITE_FLAG_CHECK_INTEGRITY)
- mode = "w+b";
- else
- mode = "wb";
+ int ret = 0;
+ if (fp && !w->wim_locked) {
+ ret = flock(fileno(fp), LOCK_EX | LOCK_NB);
+ if (ret != 0) {
+ if (errno == EWOULDBLOCK) {
+ ERROR("`%"TS"' is already being modified or has been "
+ "mounted read-write\n"
+ " by another process!", w->filename);
+ ret = WIMLIB_ERR_ALREADY_LOCKED;
+ } else {
+ WARNING_WITH_ERRNO("Failed to lock `%"TS"'",
+ w->filename);
+ ret = 0;
+ }
+ } else {
+ w->wim_locked = 1;
+ }
+ }
+ return ret;
+}
+#endif
- if (w->out_fp)
- fclose(w->out_fp);
+static int
+open_wim_writable(WIMStruct *w, const tchar *path,
+ bool trunc, bool also_readable)
+{
+ const tchar *mode;
+ if (trunc)
+ if (also_readable)
+ mode = T("w+b");
+ else
+ mode = T("wb");
+ else
+ mode = T("r+b");
- w->out_fp = fopen(path, mode);
- if (!w->out_fp) {
- ERROR_WITH_ERRNO("Failed to open the file `%s' for writing",
- path);
+ wimlib_assert(w->out_fp == NULL);
+ w->out_fp = tfopen(path, mode);
+ if (w->out_fp) {
+ return 0;
+ } else {
+ ERROR_WITH_ERRNO("Failed to open `%"TS"' for writing", path);
return WIMLIB_ERR_OPEN;
}
+}
+
+void
+close_wim_writable(WIMStruct *w)
+{
+ if (w->out_fp) {
+ if (fclose(w->out_fp) != 0) {
+ WARNING_WITH_ERRNO("Failed to close output WIM");
+ }
+ w->out_fp = NULL;
+ }
+}
+
+/* Open file stream and write dummy header for WIM. */
+int
+begin_write(WIMStruct *w, const tchar *path, int write_flags)
+{
+ int ret;
+ ret = open_wim_writable(w, path, true,
+ (write_flags & WIMLIB_WRITE_FLAG_CHECK_INTEGRITY) != 0);
+ if (ret)
+ return ret;
/* Write dummy header. It will be overwritten later. */
return write_header(&w->hdr, w->out_fp);
}
/* Writes a stand-alone WIM to a file. */
-WIMLIBAPI int wimlib_write(WIMStruct *w, const char *path,
- int image, int write_flags)
+WIMLIBAPI int
+wimlib_write(WIMStruct *w, const tchar *path,
+ int image, int write_flags, unsigned num_threads,
+ wimlib_progress_func_t progress_func)
{
int ret;
- if (!w || !path)
+ if (!path)
return WIMLIB_ERR_INVALID_PARAM;
- write_flags &= ~WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE;
+ write_flags &= WIMLIB_WRITE_MASK_PUBLIC;
- if (image != WIM_ALL_IMAGES &&
+ if (image != WIMLIB_ALL_IMAGES &&
(image < 1 || image > w->hdr.image_count))
return WIMLIB_ERR_INVALID_IMAGE;
-
if (w->hdr.total_parts != 1) {
ERROR("Cannot call wimlib_write() on part of a split WIM");
return WIMLIB_ERR_SPLIT_UNSUPPORTED;
}
- if (image == WIM_ALL_IMAGES)
- DEBUG("Writing all images to `%s'.", path);
+ ret = begin_write(w, path, write_flags);
+ if (ret)
+ goto out_close_wim;
+
+ ret = write_wim_streams(w, image, write_flags, num_threads,
+ progress_func);
+ if (ret)
+ goto out_close_wim;
+
+ if (progress_func)
+ progress_func(WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN, NULL);
+
+ ret = for_image(w, image, write_metadata_resource);
+ if (ret)
+ goto out_close_wim;
+
+ if (progress_func)
+ progress_func(WIMLIB_PROGRESS_MSG_WRITE_METADATA_END, NULL);
+
+ ret = finish_write(w, image, write_flags, progress_func);
+ /* finish_write() closed the WIM for us */
+ goto out;
+out_close_wim:
+ close_wim_writable(w);
+out:
+ DEBUG("wimlib_write(path=%"TS") = %d", path, ret);
+ return ret;
+}
+
+static bool
+any_images_modified(WIMStruct *w)
+{
+ for (int i = 0; i < w->hdr.image_count; i++)
+ if (w->image_metadata[i]->modified)
+ return true;
+ return false;
+}
+
+/*
+ * Overwrite a WIM, possibly appending streams to it.
+ *
+ * A WIM looks like (or is supposed to look like) the following:
+ *
+ * Header (212 bytes)
+ * Streams and metadata resources (variable size)
+ * Lookup table (variable size)
+ * XML data (variable size)
+ * Integrity table (optional) (variable size)
+ *
+ * If we are not adding any streams or metadata resources, the lookup table is
+ * unchanged--- so we only need to overwrite the XML data, integrity table, and
+ * header. This operation is potentially unsafe if the program is abruptly
+ * terminated while the XML data or integrity table are being overwritten, but
+ * before the new header has been written. To partially alleviate this problem,
+ * a special flag (WIMLIB_WRITE_FLAG_CHECKPOINT_AFTER_XML) is passed to
+ * finish_write() to cause a temporary WIM header to be written after the XML
+ * data has been written. This may prevent the WIM from becoming corrupted if
+ * the program is terminated while the integrity table is being calculated (but
+ * no guarantees, due to write re-ordering...).
+ *
+ * If we are adding new streams or images (metadata resources), the lookup table
+ * needs to be changed, and those streams need to be written. In this case, we
+ * try to perform a safe update of the WIM file by writing the streams *after*
+ * the end of the previous WIM, then writing the new lookup table, XML data, and
+ * (optionally) integrity table following the new streams. This will produce a
+ * layout like the following:
+ *
+ * Header (212 bytes)
+ * (OLD) Streams and metadata resources (variable size)
+ * (OLD) Lookup table (variable size)
+ * (OLD) XML data (variable size)
+ * (OLD) Integrity table (optional) (variable size)
+ * (NEW) Streams and metadata resources (variable size)
+ * (NEW) Lookup table (variable size)
+ * (NEW) XML data (variable size)
+ * (NEW) Integrity table (optional) (variable size)
+ *
+ * At all points, the WIM is valid as nothing points to the new data yet. Then,
+ * the header is overwritten to point to the new lookup table, XML data, and
+ * integrity table, to produce the following layout:
+ *
+ * Header (212 bytes)
+ * Streams and metadata resources (variable size)
+ * Nothing (variable size)
+ * More Streams and metadata resources (variable size)
+ * Lookup table (variable size)
+ * XML data (variable size)
+ * Integrity table (optional) (variable size)
+ *
+ * This method allows an image to be appended to a large WIM very quickly, and
+ * is is crash-safe except in the case of write re-ordering, but the
+ * disadvantage is that a small hole is left in the WIM where the old lookup
+ * table, xml data, and integrity table were. (These usually only take up a
+ * small amount of space compared to the streams, however.)
+ */
+static int
+overwrite_wim_inplace(WIMStruct *w, int write_flags,
+ unsigned num_threads,
+ wimlib_progress_func_t progress_func)
+{
+ int ret;
+ struct list_head stream_list;
+ off_t old_wim_end;
+
+ DEBUG("Overwriting `%"TS"' in-place", w->filename);
+
+ /* Make sure that the integrity table (if present) is after the XML
+ * data, and that there are no stream resources, metadata resources, or
+ * lookup tables after the XML data. Otherwise, these data would be
+ * overwritten. */
+ if (w->hdr.integrity.offset != 0 &&
+ w->hdr.integrity.offset < w->hdr.xml_res_entry.offset) {
+ ERROR("Didn't expect the integrity table to be before the XML data");
+ return WIMLIB_ERR_RESOURCE_ORDER;
+ }
+
+ if (w->hdr.lookup_table_res_entry.offset > w->hdr.xml_res_entry.offset) {
+ ERROR("Didn't expect the lookup table to be after the XML data");
+ return WIMLIB_ERR_RESOURCE_ORDER;
+ }
+
+
+ if (w->hdr.integrity.offset)
+ old_wim_end = w->hdr.integrity.offset + w->hdr.integrity.size;
else
- DEBUG("Writing image %d to `%s'.", image, path);
+ old_wim_end = w->hdr.xml_res_entry.offset + w->hdr.xml_res_entry.size;
+
+ if (!w->deletion_occurred && !any_images_modified(w)) {
+ /* If no images have been modified and no images have been
+ * deleted, a new lookup table does not need to be written. */
+ DEBUG("Skipping writing lookup table "
+ "(no images modified or deleted)");
+ old_wim_end = w->hdr.lookup_table_res_entry.offset +
+ w->hdr.lookup_table_res_entry.size;
+ write_flags |= WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE |
+ WIMLIB_WRITE_FLAG_CHECKPOINT_AFTER_XML;
+ }
+ ret = prepare_streams_for_overwrite(w, old_wim_end, &stream_list);
+ if (ret)
+ return ret;
- ret = begin_write(w, path, write_flags);
- if (ret != 0)
+ ret = open_wim_writable(w, w->filename, false,
+ (write_flags & WIMLIB_WRITE_FLAG_CHECK_INTEGRITY) != 0);
+ if (ret)
return ret;
- for_lookup_table_entry(w->lookup_table, lte_zero_out_refcnt, NULL);
+ ret = lock_wim(w, w->out_fp);
+ if (ret) {
+ fclose(w->out_fp);
+ w->out_fp = NULL;
+ return ret;
+ }
- ret = write_wim_streams(w, image, write_flags);
+ if (fseeko(w->out_fp, old_wim_end, SEEK_SET) != 0) {
+ ERROR_WITH_ERRNO("Can't seek to end of WIM");
+ fclose(w->out_fp);
+ w->out_fp = NULL;
+ w->wim_locked = 0;
+ return WIMLIB_ERR_WRITE;
+ }
- if (ret != 0) {
- /*ERROR("Failed to write WIM file resources to `%s'", path);*/
- return ret;
+ DEBUG("Writing newly added streams (offset = %"PRIu64")",
+ old_wim_end);
+ ret = write_stream_list(&stream_list,
+ w->lookup_table,
+ w->out_fp,
+ wimlib_get_compression_type(w),
+ write_flags,
+ num_threads,
+ progress_func);
+ if (ret)
+ goto out_ftruncate;
+
+ for (int i = 0; i < w->hdr.image_count; i++) {
+ if (w->image_metadata[i]->modified) {
+ select_wim_image(w, i + 1);
+ ret = write_metadata_resource(w);
+ if (ret)
+ goto out_ftruncate;
+ }
}
+ write_flags |= WIMLIB_WRITE_FLAG_REUSE_INTEGRITY_TABLE;
+ ret = finish_write(w, WIMLIB_ALL_IMAGES, write_flags,
+ progress_func);
+out_ftruncate:
+ close_wim_writable(w);
+ if (ret != 0 && !(write_flags & WIMLIB_WRITE_FLAG_NO_LOOKUP_TABLE)) {
+ WARNING("Truncating `%"TS"' to its original size (%"PRIu64" bytes)",
+ w->filename, old_wim_end);
+ /* Return value of truncate() is ignored because this is already
+ * an error path. */
+ (void)ttruncate(w->filename, old_wim_end);
+ }
+ w->wim_locked = 0;
+ return ret;
+}
- ret = for_image(w, image, write_metadata_resource);
+static int
+overwrite_wim_via_tmpfile(WIMStruct *w, int write_flags,
+ unsigned num_threads,
+ wimlib_progress_func_t progress_func)
+{
+ size_t wim_name_len;
+ int ret;
- if (ret != 0) {
- /*ERROR("Failed to write WIM image metadata to `%s'", path);*/
- return ret;
+ DEBUG("Overwriting `%"TS"' via a temporary file", w->filename);
+
+ /* Write the WIM to a temporary file in the same directory as the
+ * original WIM. */
+ wim_name_len = tstrlen(w->filename);
+ tchar tmpfile[wim_name_len + 10];
+ tmemcpy(tmpfile, w->filename, wim_name_len);
+ randomize_char_array_with_alnum(tmpfile + wim_name_len, 9);
+ tmpfile[wim_name_len + 9] = T('\0');
+
+ ret = wimlib_write(w, tmpfile, WIMLIB_ALL_IMAGES,
+ write_flags | WIMLIB_WRITE_FLAG_FSYNC,
+ num_threads, progress_func);
+ if (ret) {
+ ERROR("Failed to write the WIM file `%"TS"'", tmpfile);
+ goto out_unlink;
}
- ret = finish_write(w, image, write_flags);
- if (ret != 0)
- return ret;
+ DEBUG("Renaming `%"TS"' to `%"TS"'", tmpfile, w->filename);
- if (write_flags & WIMLIB_WRITE_FLAG_VERBOSE)
- printf("Successfully wrote `%s'\n", path);
- return 0;
+#ifdef __WIN32__
+ /* Windows won't let you delete open files unless FILE_SHARE_DELETE was
+ * specified to CreateFile(). The WIM was opened with fopen(), which
+ * didn't provided this flag to CreateFile, so the handle must be closed
+ * before executing the rename(). */
+ if (w->fp != NULL) {
+ fclose(w->fp);
+ w->fp = NULL;
+ }
+#endif
+
+ /* Rename the new file to the old file .*/
+ if (trename(tmpfile, w->filename) != 0) {
+ ERROR_WITH_ERRNO("Failed to rename `%"TS"' to `%"TS"'",
+ tmpfile, w->filename);
+ ret = WIMLIB_ERR_RENAME;
+ goto out_unlink;
+ }
+
+ if (progress_func) {
+ union wimlib_progress_info progress;
+ progress.rename.from = tmpfile;
+ progress.rename.to = w->filename;
+ progress_func(WIMLIB_PROGRESS_MSG_RENAME, &progress);
+ }
+
+ /* Close the original WIM file that was opened for reading. */
+ if (w->fp != NULL) {
+ fclose(w->fp);
+ w->fp = NULL;
+ }
+
+ /* Re-open the WIM read-only. */
+ w->fp = tfopen(w->filename, T("rb"));
+ if (w->fp == NULL) {
+ ret = WIMLIB_ERR_REOPEN;
+ WARNING_WITH_ERRNO("Failed to re-open `%"TS"' read-only",
+ w->filename);
+ FREE(w->filename);
+ w->filename = NULL;
+ }
+ goto out;
+out_unlink:
+ /* Remove temporary file. */
+ if (tunlink(tmpfile) != 0)
+ WARNING_WITH_ERRNO("Failed to remove `%"TS"'", tmpfile);
+out:
+ return ret;
+}
+
+/*
+ * Writes a WIM file to the original file that it was read from, overwriting it.
+ */
+WIMLIBAPI int
+wimlib_overwrite(WIMStruct *w, int write_flags,
+ unsigned num_threads,
+ wimlib_progress_func_t progress_func)
+{
+ write_flags &= WIMLIB_WRITE_MASK_PUBLIC;
+
+ if (!w->filename)
+ return WIMLIB_ERR_NO_FILENAME;
+
+ if (w->hdr.total_parts != 1) {
+ ERROR("Cannot modify a split WIM");
+ return WIMLIB_ERR_SPLIT_UNSUPPORTED;
+ }
+
+ if ((!w->deletion_occurred || (write_flags & WIMLIB_WRITE_FLAG_SOFT_DELETE))
+ && !(write_flags & WIMLIB_WRITE_FLAG_REBUILD))
+ {
+ int ret;
+ ret = overwrite_wim_inplace(w, write_flags, num_threads,
+ progress_func);
+ if (ret == WIMLIB_ERR_RESOURCE_ORDER)
+ WARNING("Falling back to re-building entire WIM");
+ else
+ return ret;
+ }
+ return overwrite_wim_via_tmpfile(w, write_flags, num_threads,
+ progress_func);
}
git://wimlib.net / wimlib / blobdiff