*
* \section intro Introduction
*
- * This is the documentation for the library interface of wimlib 1.3.0. If you
- * have installed wimlib and want to know how to use the @c imagex program,
- * please see the man pages instead. Also: the actual project page where you
- * can download the source code for the library is at <a
+ * This is the documentation for the library interface of wimlib 1.4.0. If you
+ * have installed wimlib and want to know how to use the @b wimlib-imagex
+ * program, please see the man pages instead. Also: the actual project page
+ *
where you can download the source code for the library is at <a
* href="https://sourceforge.net/projects/wimlib">https://sourceforge.net/projects/wimlib</a>.
*
* wimlib is a C library to read, write, and mount archive files in the Windows
- * Imaging Format (WIM files). These files are normally created using the @c
- * imagex.exe utility on Windows, but this library provides a free
- * implementetion of @c imagex for UNIX-based systems and an API to allow other
- * programs to read, write, and mount WIM files. wimlib is comparable to
- * Microsoft's WIMGAPI, but was designed independently and is not a clone of it.
+ * Imaging Format (WIM files). These files are normally created using the
+ * ImageX (@a imagex.exe) utility on Windows, but this library provides a free
+ * implementation of ImageX for UNIX-based systems (and, since v1.3.0, for
+ * Windows systems) and an API to allow other programs to read, write, and mount
+ * WIM files. wimlib is comparable to Microsoft's WIMGAPI, but was designed
+ * independently and is not a clone of it.
*
* \section format WIM files
*
* Configuration Data. In addition, a Windows installation can be captured (or
* backed up) into a WIM file, and then re-applied later.
*
+ * wimlib v1.3.0 and later also supports NTFS capture and apply in the native
+ * Windows build, which works slightly differently and relies on native Win32
+ * API calls rather than libntfs-3g.
+ *
* \section winpe Windows PE
*
* A major use for this library is to create customized images of Windows PE, the
* wimlib_add_image(). This can be done with a ::WIMStruct gotten from
* wimlib_open_wim() or from wimlib_create_new_wim(). wimlib_add_image() can
* also capture a WIM image directly from a NTFS volume if you provide the
- * ::WIMLIB_ADD_IMAGE_FLAG_NTFS flag, provided that wimlib was not compiled with
+ * ::WIMLIB_ADD_FLAG_NTFS flag, provided that wimlib was not compiled with
* the <code>--without-ntfs-3g</code> flag.
*
* To extract an image from a WIM file, call wimlib_extract_image(). You may
* the WIM operation(s) to report on the progress of the operation (for example,
* how many bytes have been written so far).
*
- * \section imagex imagex
+ * \section imagex wimlib-imagex
*
- * wimlib comes with a command-line interface, the @b imagex program. It is
- * documented with man pages. See its source code (@c programs/imagex.c in
- * wimlib's source tree) for an example of how to use wimlib in your program.
+ * wimlib comes with a command-line interface, the @b wimlib-imagex program. It
+ * is documented with man pages. This program was originally just called @b
+ * imagex, but has been changed to @b wimlib-imagex to avoid confusion with
+ * Microsoft's @a imagex.exe (which would otherwise have exactly the same
+ * filename on Windows).
*
* \section mkwinpeimg mkwinpeimg
*
* wimlib also comes with the <b>mkwinpeimg</b> script, which is documented in a
* man page.
*
- * \section Locales and character encodings
+ * \section encodings Locales and character encodings
+ *
+ * To support Windows as well as UNIX, wimlib's API typically takes and returns
+ * strings of ::wimlib_tchar, which are in a platform-dependent encoding.
+ *
+ * On Windows, each ::wimlib_tchar is 2 bytes and is the same as a "wchar_t",
+ * and the encoding is UTF-16LE.
*
- * wimlib 1.3.0 is able to better handle alternate character encodings than
- * previous versions. Functions are explictly noted as taking ::wimlib_mbchar
- * strings, which are encoded in the locale-dependent multibyte encoding (e.g.
- * ASCII, ISO-8859-1, or UTF-8), or ::wimlib_utf8char strings, which are
- * encoded in UTF-8. Generally, filenames and paths are in the locale-dependent
- * multibyte encoding, while other types of data must be provided in UTF-8.
- * Please see the man page for 'imagex' for more information.
+ * On UNIX, each ::wimlib_tchar is 1 byte and is simply a "char", and the
+* encoding is the locale-dependent multibyte encoding. I recommend you set your
+* locale to a UTF-8 capable locale to avoid any issues. Also, by default,
+ * wimlib on UNIX will assume the locale is UTF-8 capable unless you call
+* wimlib_global_init() after having set your desired locale.
*
* \section Limitations
*
* without mounting it, other than by adding, removing, or extracting an
* entire image. The FUSE mount feature should be used for this purpose.
* - Currently, Microsoft's @a image.exe can create slightly smaller WIM files
- * than wimlib when using maximum (LZX) compression because it knows how to
- * split up LZX compressed blocks, which is not yet implemented in wimlib.
+ * than wimlib (~2% or 3% smaller) when using maximum (LZX) compression.
* - wimlib is experimental and likely contains bugs; use Microsoft's @a
* imagex.exe if you want to make sure your WIM files are made "correctly".
* - The old WIM format from Vista pre-releases is not supported.
* script for a similar purpose, however. With regards to adding drivers to
* Windows PE, you have the option of putting them anywhere in the Windows PE
* image, then loading them after boot using @b drvload.exe.
+ * - Although wimlib 1.3.0 and later can be used on Windows as well as UNIX, the
+ * Windows build has some limitations compared to the UNIX build.
+ * (The differences are documented better in the man pages for
+ * @b wimlib-imagex than here.)
*
* \section legal License
*
* The wimlib library, as well as the programs and scripts distributed with it
- * (@b imagex and @b mkwinpeimg), is licensed under the GNU General Public
- * License version 3 or later.
+ * (@b wimlib-imagex and @b mkwinpeimg), is licensed under the GNU General
+ * Public License version 3 or later.
*/
#ifndef _WIMLIB_H
#define WIMLIB_MAJOR_VERSION 1
/** Minor version of the library (for example, the 2 in 1.2.5). */
-#define WIMLIB_MINOR_VERSION 3
+#define WIMLIB_MINOR_VERSION 4
/** Patch version of the library (for example, the 5 in 1.2.5). */
#define WIMLIB_PATCH_VERSION 0
*/
typedef struct WIMStruct WIMStruct;
-typedef char wimlib_mbchar;
-typedef char wimlib_utf8char;
+#ifdef __WIN32__
+typedef wchar_t wimlib_tchar;
+#else
+/** See \ref encodings */
+typedef char wimlib_tchar;
+#endif
/**
* Specifies the compression type of a WIM file.
* ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
+ /** A file or directory tree within a WIM image (not the full image) is
+ * about to be extracted. @a info will point to
+ * ::wimlib_progress_info.extract. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
+
/** The directory structure of the WIM image is about to be extracted.
* @a info will point to ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
* ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END,
+ /** A file or directory tree within a WIM image (not the full image) has
+ * been successfully extracted. @a info will point to
+ * ::wimlib_progress_info.extract. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
+
/** The directory or NTFS volume is about to be scanned to build a tree
* of WIM dentries in-memory. @a info will point to
* ::wimlib_progress_info.scan. */
/** A directory or file is being scanned. @a info will point to
* ::wimlib_progress_info.scan, and its @a cur_path member will be
- * valid. This message is only sent if ::WIMLIB_ADD_IMAGE_FLAG_VERBOSE
+ * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE
* is passed to wimlib_add_image(). */
WIMLIB_PROGRESS_MSG_SCAN_DENTRY,
* ::WIMLIB_COMPRESSION_TYPE_XPRESS, or
* ::WIMLIB_COMPRESSION_TYPE_LZX. */
int compression_type;
+
+ /** Library internal use only. */
+ uint64_t _private;
} write_streams;
/** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
* ::WIMLIB_PROGRESS_MSG_SCAN_END. */
struct wimlib_progress_info_scan {
/** Directory or NTFS volume that is being scanned. */
- const wimlib_mbchar *source;
+ const wimlib_tchar *source;
/** Path to the file or directory that is about to be scanned,
* relative to the root of the image capture or the NTFS volume.
* */
- const wimlib_mbchar *cur_path;
+ const wimlib_tchar *cur_path;
/** True iff @a cur_path is being excluded from the image
* capture due to the capture configuration file. */
/** Target path in the WIM. Only valid on messages
* ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
* ::WIMLIB_PROGRESS_MSG_SCAN_END. */
- const wimlib_mbchar *wim_target_path;
+ const wimlib_tchar *wim_target_path;
} scan;
/** Valid on messages ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
int extract_flags;
/** Full path to the WIM file being extracted. */
- const wimlib_mbchar *wimfile_name;
+ const wimlib_tchar *wimfile_name;
/** Name of the image being extracted. */
- const wimlib_utf8char *image_name;
+ const wimlib_tchar *image_name;
/** Directory or NTFS volume to which the image is being
* extracted. */
- const wimlib_mbchar *target;
+ const wimlib_tchar *target;
/** Current dentry being extracted. (Valid only if message is
* ::WIMLIB_PROGRESS_MSG_EXTRACT_DENTRY.) */
- const wimlib_mbchar *cur_path;
+ const wimlib_tchar *cur_path;
/** Number of bytes of uncompressed data that will be extracted.
* Takes into account hard links (they are not counted for each
* special cases (hard links, symbolic links, and alternate data
* streams.) */
uint64_t num_streams;
+
+ /** Path to the root dentry within the WIM for the tree that is
+ * being extracted. Will be the empty string when extracting a
+ * full image. */
+ const wimlib_tchar *extract_root_wim_source_path;
} extract;
/** Valid on messages ::WIMLIB_PROGRESS_MSG_RENAME. */
struct wimlib_progress_info_rename {
/** Name of the temporary file that the WIM was written to. */
- const wimlib_mbchar *from;
+ const wimlib_tchar *from;
/** Name of the original WIM file to which the temporary file is
* being renamed. */
- const wimlib_mbchar *to;
+ const wimlib_tchar *to;
} rename;
/** Valid on messages ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY and
/** Filename of the WIM (only valid if the message is
* ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY). */
- const wimlib_mbchar *filename;
+ const wimlib_tchar *filename;
} integrity;
/** Valid on messages ::WIMLIB_PROGRESS_MSG_JOIN_STREAMS. */
/** Name of the split WIM part that is about to be started
* (::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART) or has just been
* finished (::WIMLIB_PROGRESS_MSG_SPLIT_END_PART). */
- const wimlib_mbchar *part_name;
+ const wimlib_tchar *part_name;
} split;
};
struct wimlib_capture_source {
/** Absolute or relative path to a file or directory on the external
* filesystem to be included in the WIM image. */
- wimlib_mbchar *fs_source_path;
+ wimlib_tchar *fs_source_path;
/** Destination path in the WIM image. Leading and trailing slashes are
* ignored. The empty string or @c NULL means the root directory of the
* WIM image. */
- wimlib_mbchar *wim_target_path;
+ wimlib_tchar *wim_target_path;
/** Reserved; set to 0. */
long reserved;
};
+/** Structure that specifies a list of path patterns. */
+struct wimlib_pattern_list {
+ /** Array of patterns. The patterns may be modified by library code,
+ * but the @a pats pointer itself will not. See the man page for
+ * <b>wimlib-imagex capture</b> for more information about allowed
+ * patterns. */
+ wimlib_tchar **pats;
+
+ /** Number of patterns in the @a pats array. */
+ size_t num_pats;
+
+ /** Ignored; may be used by the calling code. */
+ size_t num_allocated_pats;
+};
+
+/** A structure that contains lists of wildcards that match paths to treat
+ * specially when capturing a WIM image. */
+struct wimlib_capture_config {
+ /** Paths matching any pattern this list are excluded from being
+ * captured, except if the same path appears in @a
+ * exclusion_exception_pats. */
+ struct wimlib_pattern_list exclusion_pats;
+
+ /** Paths matching any pattern in this list are never excluded from
+ * being captured. */
+ struct wimlib_pattern_list exclusion_exception_pats;
+
+ /** Reserved for future capture configuration options. */
+ struct wimlib_pattern_list reserved1;
+
+ /** Reserved for future capture configuration options. */
+ struct wimlib_pattern_list reserved2;
+
+ /** Library internal use only. */
+ const wimlib_tchar *_prefix;
+
+ /** Library internal use only. */
+ size_t _prefix_num_tchars;
+};
+
/*****************************
- * WIMLIB_ADD_IMAGE_FLAG_* *
+ * WIMLIB_ADD_FLAG_*
*****************************/
/** Directly capture a NTFS volume rather than a generic directory. This flag
- * cannot be combined with ::WIMLIB_ADD_IMAGE_FLAG_DEREFERENCE or
- * ::WIMLIB_ADD_IMAGE_FLAG_UNIX_DATA. */
-#define WIMLIB_ADD_IMAGE_FLAG_NTFS 0x00000001
+ * cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
+ * ::WIMLIB_ADD_FLAG_UNIX_DATA. */
+#define WIMLIB_ADD_FLAG_NTFS 0x00000001
/** Follow symlinks; archive and dump the files they point to. Cannot be used
- * with ::WIMLIB_ADD_IMAGE_FLAG_NTFS. */
-#define WIMLIB_ADD_IMAGE_FLAG_DEREFERENCE 0x00000002
+ * with ::WIMLIB_ADD_FLAG_NTFS. */
+#define WIMLIB_ADD_FLAG_DEREFERENCE 0x00000002
/** Call the progress function with the message
* ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file is starting to
* be scanned. */
-#define WIMLIB_ADD_IMAGE_FLAG_VERBOSE 0x00000004
+#define WIMLIB_ADD_FLAG_VERBOSE 0x00000004
/** Mark the image being added as the bootable image of the WIM. */
-#define WIMLIB_ADD_IMAGE_FLAG_BOOT 0x00000008
+#define WIMLIB_ADD_FLAG_BOOT 0x00000008
/** Store the UNIX owner, group, and mode. This is done by adding a special
* alternate data stream to each regular file, symbolic link, and directory to
* contain this information. Please note that this flag is for convenience
- * only; Microsoft's version of imagex.exe will not understand this special
- * information. This flag cannot be combined with ::WIMLIB_ADD_IMAGE_FLAG_NTFS.
+ * only; Microsoft's @a imagex.exe will not understand this special information.
+ * This flag cannot be combined with ::WIMLIB_ADD_FLAG_NTFS. */
+#define WIMLIB_ADD_FLAG_UNIX_DATA 0x00000010
+
+/** Do not capture security descriptors. Only has an effect in NTFS capture
+ * mode, or in Win32 native builds. */
+#define WIMLIB_ADD_FLAG_NO_ACLS 0x00000020
+
+/** Fail immediately if the full security descriptor of any file or directory
+ * cannot be accessed. Only has an effect in Win32 native builds. The default
+ * behavior without this flag is to first try omitting the SACL from the
+ * security descriptor, then to try omitting the security descriptor entirely.
* */
-#define WIMLIB_ADD_IMAGE_FLAG_UNIX_DATA 0x00000010
+#define WIMLIB_ADD_FLAG_STRICT_ACLS 0x00000040
+
+/** Call the progress function with the message
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when a directory or file is excluded from
+ * capture. This is a subset of the messages provided by
+ * ::WIMLIB_ADD_FLAG_VERBOSE. */
+#define WIMLIB_ADD_FLAG_EXCLUDE_VERBOSE 0x00000080
+
+/** Reparse-point fixups: Modify absolute symbolic links (or junction points,
+ * in the case of Windows) that point inside the directory being captured to
+ * instead be absolute relative to the directory being captured, rather than the
+ * current root; also exclude absolute symbolic links that point outside the
+ * directory tree being captured.
+ *
+ * Without this flag, the default is to do this if WIM_HDR_FLAG_RP_FIX is set in
+ * the WIM header or if this is the first image being added.
+ * WIM_HDR_FLAG_RP_FIX is set if the first image in a WIM is captured with
+ * reparse point fixups enabled and currently cannot be unset. */
+#define WIMLIB_ADD_FLAG_RPFIX 0x00000100
+
+/** Don't do reparse point fixups. The default behavior is described in the
+ * documentation for ::WIMLIB_ADD_FLAG_RPFIX. */
+#define WIMLIB_ADD_FLAG_NORPFIX 0x00000200
+
+#define WIMLIB_ADD_IMAGE_FLAG_NTFS WIMLIB_ADD_FLAG_NTFS
+#define WIMLIB_ADD_IMAGE_FLAG_DEREFERENCE WIMLIB_ADD_FLAG_DEREFERENCE
+#define WIMLIB_ADD_IMAGE_FLAG_VERBOSE WIMLIB_ADD_FLAG_VERBOSE
+#define WIMLIB_ADD_IMAGE_FLAG_BOOT WIMLIB_ADD_FLAG_BOOT
+#define WIMLIB_ADD_IMAGE_FLAG_UNIX_DATA WIMLIB_ADD_FLAG_UNIX_DATA
+#define WIMLIB_ADD_IMAGE_FLAG_NO_ACLS WIMLIB_ADD_FLAG_NO_ACLS
+#define WIMLIB_ADD_IMAGE_FLAG_STRICT_ACLS WIMLIB_ADD_FLAG_STRICT_ACLS
+#define WIMLIB_ADD_IMAGE_FLAG_EXCLUDE_VERBOSE WIMLIB_ADD_FLAG_EXCLUDE_VERBOSE
+#define WIMLIB_ADD_IMAGE_FLAG_RPFIX WIMLIB_ADD_FLAG_RPFIX
+#define WIMLIB_ADD_IMAGE_FLAG_NORPFIX WIMLIB_ADD_FLAG_NORPFIX
/******************************
- * WIMLIB_EXPORT_FLAG_* *
+ * WIMLIB_DELETE_FLAG_*
+ ******************************/
+
+/** Do not issue an error if the path to delete does not exist. */
+#define WIMLIB_DELETE_FLAG_FORCE 0x00000001
+
+/** Delete the file or directory tree recursively; if not specified, an error is
+ * issued if the path to delete is a directory. */
+#define WIMLIB_DELETE_FLAG_RECURSIVE 0x00000002
+
+/******************************
+ * WIMLIB_EXPORT_FLAG_*
******************************/
/** See documentation for wimlib_export_image(). */
#define WIMLIB_EXPORT_FLAG_BOOT 0x00000001
/******************************
- * WIMLIB_EXTRACT_FLAG_* *
+ * WIMLIB_EXTRACT_FLAG_*
******************************/
/** Extract the image directly to a NTFS volume rather than a generic directory.
/** Read the WIM file sequentially while extracting the image. */
#define WIMLIB_EXTRACT_FLAG_SEQUENTIAL 0x00000010
-/** Extract special UNIX data captured with ::WIMLIB_ADD_IMAGE_FLAG_UNIX_DATA.
+/** Extract special UNIX data captured with ::WIMLIB_ADD_FLAG_UNIX_DATA.
* Cannot be used with ::WIMLIB_EXTRACT_FLAG_NTFS. */
#define WIMLIB_EXTRACT_FLAG_UNIX_DATA 0x00000020
+/** Do not extract security descriptors. Only has an effect in NTFS apply mode,
+ * or in Win32 native builds. */
+#define WIMLIB_EXTRACT_FLAG_NO_ACLS 0x00000040
+
+/** Fail immediately if the full security descriptor of any file or directory
+ * cannot be set exactly as specified in the WIM file. The default behavior
+ * without this flag is to fall back to setting the security descriptor with the
+ * SACL omitted, then only the default inherited security descriptor, if we do
+ * not have permission to set the desired one. */
+#define WIMLIB_EXTRACT_FLAG_STRICT_ACLS 0x00000080
+
+/* Extract equivalent to ::WIMLIB_ADD_FLAG_RPFIX; force reparse-point
+ * fixups on, so absolute symbolic links or junction points will be fixed to be
+ * absolute relative to the actual extraction root. Done by default if
+ * WIM_HDR_FLAG_RP_FIX is set in the WIM header. This flag may only be
+ * specified when extracting a full image. */
+#define WIMLIB_EXTRACT_FLAG_RPFIX 0x00000100
+
+/** Force reparse-point fixups on extraction off, regardless of the state of the
+ * WIM_HDR_FLAG_RP_FIX flag in the WIM header. */
+#define WIMLIB_EXTRACT_FLAG_NORPFIX 0x00000200
+
+/** Extract files to standard output rather than to the filesystem. */
+#define WIMLIB_EXTRACT_FLAG_TO_STDOUT 0x00000400
+
/******************************
- * WIMLIB_MOUNT_FLAG_* *
+ * WIMLIB_MOUNT_FLAG_*
******************************/
/** Mount the WIM image read-write rather than the default of read-only. */
#define WIMLIB_MOUNT_FLAG_STREAM_INTERFACE_WINDOWS 0x00000010
/** Use UNIX file owners, groups, and modes if available in the WIM (see
- * ::WIMLIB_ADD_IMAGE_FLAG_UNIX_DATA). */
+ * ::WIMLIB_ADD_FLAG_UNIX_DATA). */
#define WIMLIB_MOUNT_FLAG_UNIX_DATA 0x00000020
/** Allow other users to see the mounted filesystem. (this passes the @c
#define WIMLIB_MOUNT_FLAG_ALLOW_OTHER 0x00000040
/******************************
- * WIMLIB_OPEN_FLAG_* *
+ * WIMLIB_OPEN_FLAG_*
******************************/
/** Verify the WIM contents against the WIM's integrity table, if present. */
#define WIMLIB_OPEN_FLAG_SPLIT_OK 0x00000002
/******************************
- * WIMLIB_UNMOUNT_FLAG_* *
+ * WIMLIB_UNMOUNT_FLAG_*
******************************/
/** Include an integrity table in the WIM after it's been unmounted. Ignored
#define WIMLIB_UNMOUNT_FLAG_RECOMPRESS 0x00000008
/******************************
- * WIMLIB_WRITE_FLAG_* *
+ * WIMLIB_WRITE_FLAG_*
******************************/
/** Include an integrity table in the new WIM file. */
* deleting an image in this way. */
#define WIMLIB_WRITE_FLAG_SOFT_DELETE 0x00000010
+/******************************
+ * WIMLIB_INIT_FLAG_*
+ ******************************/
+
+/** Assume that strings are represented in UTF-8, even if this is not the
+ * locale's character encoding. */
+#define WIMLIB_INIT_FLAG_ASSUME_UTF8 0x00000001
+
+/** Specification of an update to perform on a WIM image. */
+struct wimlib_update_command {
+
+ /** The specific type of update to perform. */
+ enum wimlib_update_op {
+ /** Add a new file or directory tree to the WIM image in a
+ * certain location. */
+ WIMLIB_UPDATE_OP_ADD = 0,
+
+ /** Delete a file or directory tree from the WIM image. */
+ WIMLIB_UPDATE_OP_DELETE,
+
+ /** Rename a file or directory tree in the WIM image. */
+ WIMLIB_UPDATE_OP_RENAME,
+ } op;
+ union {
+ /** Data for a ::WIMLIB_UPDATE_OP_ADD operation. */
+ struct wimlib_add_command {
+ /** Filesystem path to the file or directory tree to
+ * add. */
+ wimlib_tchar *fs_source_path;
+ /** Path, specified from the root of the WIM image, at
+ * which to add the file or directory tree within the
+ * WIM image. */
+ wimlib_tchar *wim_target_path;
+
+ /** Configuration for excluded files. @c NULL means
+ * exclude no files. */
+ struct wimlib_capture_config *config;
+
+ /** Bitwise OR of WIMLIB_ADD_FLAG_* flags. */
+ int add_flags;
+ } add;
+ /** Data for a ::WIMLIB_UPDATE_OP_DELETE operation. */
+ struct wimlib_delete_command {
+ /** Path, specified from the root of the WIM image, for
+ * the file or directory tree within the WIM image to be
+ * deleted. */
+ wimlib_tchar *wim_path;
+ /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
+ int delete_flags;
+ } delete;
+ /** Data for a ::WIMLIB_UPDATE_OP_RENAME operation. */
+ struct wimlib_rename_command {
+ /** Path, specified from the root of the WIM image, for
+ * the source file or directory tree within the WIM
+ * image. */
+ wimlib_tchar *wim_source_path;
+ /** Path, specified from the root of the WIM image, for
+ * the destination file or directory tree within the WIM
+ * image. */
+ wimlib_tchar *wim_target_path;
+ /** Reserved; set to 0. */
+ int rename_flags;
+ } rename;
+ };
+};
+
+/** Specification of a file or directory tree to extract from a WIM image. */
+struct wimlib_extract_command {
+ /** Path to file or directory tree within the WIM image to extract. It
+ * must be provided as an absolute path from the root of the WIM image.
+ * The path separators may be either forward slashes or backslashes. */
+ wimlib_tchar *wim_source_path;
+
+ /** Filesystem path to extract the file or directory tree to. */
+ wimlib_tchar *fs_dest_path;
+
+ /** Bitwise or of zero or more of the WIMLIB_EXTRACT_FLAG_* flags. */
+ int extract_flags;
+};
+
/**
* Possible values of the error code returned by many functions in wimlib.
*
* See the documentation for each wimlib function to see specifically what error
* codes can be returned by a given function, and what they mean.
*/
-/* Note: these are currently in alphabetic order, but new error codes should be
- * added at the end to maintain a compatible ABI, except when it's being broken
- * anyway. */
enum wimlib_error_code {
WIMLIB_ERR_SUCCESS = 0,
WIMLIB_ERR_ALREADY_LOCKED,
WIMLIB_ERR_ICONV_NOT_AVAILABLE,
WIMLIB_ERR_IMAGE_COUNT,
WIMLIB_ERR_IMAGE_NAME_COLLISION,
+ WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT,
WIMLIB_ERR_INTEGRITY,
WIMLIB_ERR_INVALID_CAPTURE_CONFIG,
WIMLIB_ERR_INVALID_CHUNK_SIZE,
WIMLIB_ERR_INVALID_IMAGE,
WIMLIB_ERR_INVALID_INTEGRITY_TABLE,
WIMLIB_ERR_INVALID_LOOKUP_TABLE_ENTRY,
+ WIMLIB_ERR_INVALID_MULTIBYTE_STRING,
+ WIMLIB_ERR_INVALID_OVERLAY,
WIMLIB_ERR_INVALID_PARAM,
WIMLIB_ERR_INVALID_PART_NUMBER,
+ WIMLIB_ERR_INVALID_REPARSE_DATA,
WIMLIB_ERR_INVALID_RESOURCE_HASH,
WIMLIB_ERR_INVALID_RESOURCE_SIZE,
WIMLIB_ERR_INVALID_SECURITY_DATA,
WIMLIB_ERR_INVALID_UNMOUNT_MESSAGE,
- WIMLIB_ERR_INVALID_UTF8_STRING,
WIMLIB_ERR_INVALID_UTF16_STRING,
+ WIMLIB_ERR_INVALID_UTF8_STRING,
WIMLIB_ERR_LIBXML_UTF16_HANDLER_NOT_AVAILABLE,
WIMLIB_ERR_LINK,
WIMLIB_ERR_MKDIR,
WIMLIB_ERR_NTFS_3G,
WIMLIB_ERR_OPEN,
WIMLIB_ERR_OPENDIR,
- WIMLIB_ERR_READLINK,
WIMLIB_ERR_READ,
+ WIMLIB_ERR_READLINK,
WIMLIB_ERR_RENAME,
WIMLIB_ERR_REOPEN,
+ WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED,
WIMLIB_ERR_RESOURCE_ORDER,
WIMLIB_ERR_SPECIAL_FILE,
WIMLIB_ERR_SPLIT_INVALID,
WIMLIB_ERR_SPLIT_UNSUPPORTED,
WIMLIB_ERR_STAT,
WIMLIB_ERR_TIMEOUT,
+ WIMLIB_ERR_UNICODE_STRING_NOT_REPRESENTABLE,
WIMLIB_ERR_UNKNOWN_VERSION,
WIMLIB_ERR_UNSUPPORTED,
+ WIMLIB_ERR_VOLUME_LACKS_FEATURES,
WIMLIB_ERR_WRITE,
WIMLIB_ERR_XML,
- WIMLIB_ERR_INVALID_OVERLAY,
- WIMLIB_ERR_INVALID_MULTIBYTE_STRING,
- WIMLIB_ERR_UNICODE_STRING_NOT_REPRESENTABLE,
+ WIMLIB_ERR_PATH_DOES_NOT_EXIST,
+ WIMLIB_ERR_NOT_A_REGULAR_FILE,
+ WIMLIB_ERR_IS_DIRECTORY,
+ WIMLIB_ERR_NOTEMPTY,
};
-/** Used to indicate that no WIM image or an invalid WIM image. */
+/** Used to indicate no WIM image or an invalid WIM image. */
#define WIMLIB_NO_IMAGE 0
/** Used to specify all images in the WIM. */
#define WIMLIB_ALL_IMAGES (-1)
+/**
+ * Appends an empty image to a WIM file. This empty image will initially
+ * contain no files or directories, although if written without further
+ * modifications, a root directory will be created automatically for it.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct for the WIM file to which the image is to be
+ * added.
+ * @param name
+ * Name to give the new image.
+ * @param new_idx_ret
+ * If non-<code>NULL</code>, the index of the newly added image is returned
+ * in this location.
+ *
+ * @return 0 on success; nonzero on failure. The possible error codes are:
+ *
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @a name was @c NULL or an empty string.
+ * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
+ * @a wim is part of a split WIM.
+ * @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
+ * There is already an image in @a wim named @a name.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Failed to allocate the memory needed to add the new image.
+ */
+extern int
+wimlib_add_empty_image(WIMStruct *wim,
+ const wimlib_tchar *name,
+ int *new_idx_ret);
+
/**
* Adds an image to a WIM file from an on-disk directory tree or NTFS volume.
*
- * The directory tree of NTFS volume is read immediately for the purpose of
- * constructing a directory entry tree in-memory. Also, all files are read to
- * calculate their SHA1 message digests. However, because the directory tree
- * may contain a very large amount of data, the files themselves are not read
- * into memory permanently, and instead references to their paths saved. The
- * files are then read on-demand if wimlib_write() or wimlib_overwrite() is
+ * The directory tree or NTFS volume is scanned immediately to load the dentry
+ * tree into memory, and file attributes and symbolic links are read. However,
+ * actual file data is not read until wimlib_write() or wimlib_overwrite() is
* called.
*
- * See the manual page for the @c imagex program for more information about the
- * "normal" capture mode versus the NTFS capture mode (entered by providing the
- * flag ::WIMLIB_ADD_IMAGE_FLAG_NTFS).
+ * See the manual page for the @b wimlib-imagex program for more information
+ * about the "normal" capture mode versus the NTFS capture mode (entered by
+ * providing the flag ::WIMLIB_ADD_FLAG_NTFS).
*
* Note that @b no changes are committed to the underlying WIM file (if
* any) until wimlib_write() or wimlib_overwrite() is called.
* A path to a directory or unmounted NTFS volume that will be captured as
* a WIM image.
* @param name
- * The name to give the image. This must be non-@c NULL.
+ * The name to give the image. It must be nonempty and must specify a name
+ * that does not yet exist in @a wim.
* @param config
- * Pointer to the contents of an image capture configuration file. If @c
- * NULL, a default string is used. Please see the manual page for
- * <b>imagex capture</b> for more information.
- * @param config_len
- * Length of the string @a config in bytes, not including an optional
- * null-terminator. Ignored if @a config is @c NULL.
- * @param add_image_flags
- * Bitwise OR of flags prefixed with WIMLIB_ADD_IMAGE_FLAG.
+ * Capture configuration that specifies files, directories, or path globs
+ * to exclude from being captured. If @c NULL, a dummy configuration where
+ * no paths are treated specially is used.
+ * @param add_flags
+ * Bitwise OR of flags prefixed with WIMLIB_ADD_FLAG.
* @param progress_func
* If non-NULL, a function that will be called periodically with the
* progress of the current operation.
* discarded so that it appears to be in the same state as when this function
* was called.
*
- * @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
- * There is already an image named @a name in @a wim.
- * @retval ::WIMLIB_ERR_INVALID_CAPTURE_CONFIG
- * @a config was not @c NULL and did not specify a valid image capture
- * configuration.
- * @retval ::WIMLIB_ERR_INVALID_PARAM
- * @a dir was @c NULL, @a name was @c NULL, or @a name was the empty string.
- * @retval ::WIMLIB_ERR_NOMEM
- * Failed to allocate needed memory.
- * @retval ::WIMLIB_ERR_NOTDIR
- * @a source is not a directory (only if ::WIMLIB_ADD_IMAGE_FLAG_NTFS was
- * not specified in @a add_image_flags).
- * @retval ::WIMLIB_ERR_NTFS_3G
- * An error was returned from a libntfs-3g function when the NTFS volume
- * was being opened, scanned, or closed (only if
- * ::WIMLIB_ADD_IMAGE_FLAG_NTFS was specified in @a add_image_flags).
- * @retval ::WIMLIB_ERR_OPEN
- * Failed to open a file or directory in the directory tree rooted at @a
- * source (only if ::WIMLIB_ADD_IMAGE_FLAG_NTFS was not specified in @a
- * add_image_flags).
- * @retval ::WIMLIB_ERR_READ
- * Failed to read a file in the directory tree rooted at @a source (only if
- * ::WIMLIB_ADD_IMAGE_FLAG_NTFS was not specified in @a add_image_flags).
- * @retval ::WIMLIB_ERR_SPECIAL_FILE
- * The directory tree rooted at @a source contains a special file that is
- * not a directory, regular file, or symbolic link. This currently can
- * only be returned if ::WIMLIB_ADD_IMAGE_FLAG_NTFS was not specified in @a
- * add_image_flags, but it may be returned for unsupported NTFS files in
- * the future.
- * @retval ::WIMLIB_ERR_STAT
- * Failed obtain the metadata for a file or directory in the directory tree
- * rooted at @a source (only if ::WIMLIB_ADD_IMAGE_FLAG_NTFS was not
- * specified in @a add_image_flags).
- * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
- * @a wim is part of a split WIM. Adding an image to a split WIM is
- * unsupported.
- * @retval ::WIMLIB_ERR_UNSUPPORTED
- * ::WIMLIB_ADD_IMAGE_FLAG_NTFS was specified in @a add_image_flags, but
- * wimlib was configured with the @c --without-ntfs-3g flag.
+ * This function is implemented by calling wimlib_add_empty_image(), then
+ * calling wimlib_update_image() with a single "add" command, so any error code
+ * returned by wimlib_add_empty_image() may be returned, as well as any error
+ * codes returned by wimlib_update_image() other than ones documented as only
+ * being returned specifically by an update involving delete or rename commands.
*/
extern int
-wimlib_add_image(WIMStruct *wim, const wimlib_mbchar *source,
- const wimlib_utf8char *name,
- const wimlib_mbchar *config,
- size_t config_len, int add_image_flags,
+wimlib_add_image(WIMStruct *wim,
+ const wimlib_tchar *source,
+ const wimlib_tchar *name,
+ const struct wimlib_capture_config *config,
+ int add_flags,
wimlib_progress_func_t progress_func);
/** This function is equivalent to wimlib_add_image() except it allows for
* multiple sources to be combined into a single WIM image. This is done by
* specifying the @a sources and @a num_sources parameters instead of the @a
* source parameter of wimlib_add_image(). The rest of the parameters are the
- * same as wimlib_add_image(). See the documentation for <b>imagex capture</b>
- * for full details on how this mode works.
- *
- * Additional note: @a sources is not a @c const parameter and you cannot
- * assume that its contents are valid after this function returns. You must
- * save pointers to the strings in these structures if you need to free them
- * later, and/or save copies if needed.
+ * same as wimlib_add_image(). See the documentation for <b>wimlib-imagex
+ * capture</b> for full details on how this mode works.
*
* In addition to the error codes that wimlib_add_image() can return,
* wimlib_add_image_multisource() can return ::WIMLIB_ERR_INVALID_OVERLAY
* when trying to overlay a non-directory on a directory or when otherwise
* trying to overlay multiple conflicting files to the same location in the WIM
* image. It will also return ::WIMLIB_ERR_INVALID_PARAM if
- * ::WIMLIB_ADD_IMAGE_FLAG_NTFS was specified in @a add_image_flags but there
+ * ::WIMLIB_ADD_FLAG_NTFS was specified in @a add_flags but there
* was not exactly one capture source with the target being the root directory.
* (In this respect, there is no advantage to using
* wimlib_add_image_multisource() instead of wimlib_add_image() when requesting
* NTFS mode.) */
extern int
-wimlib_add_image_multisource(WIMStruct *w,
- struct wimlib_capture_source *sources,
+wimlib_add_image_multisource(WIMStruct *wim,
+ const struct wimlib_capture_source *sources,
size_t num_sources,
- const wimlib_utf8char *name,
- const wimlib_mbchar *config_str,
- size_t config_len,
- int add_image_flags,
+ const wimlib_tchar *name,
+ const struct wimlib_capture_config *config,
+ int add_flags,
wimlib_progress_func_t progress_func);
/**
* wimlib_write() or wimlib_overwrite() on @a dest_wim because @a dest_wim will
* have references back to @a src_wim.
*
- * Previous versions of this function left @a dest_wim in an indeterminate state
- * on failure. This is no longer the case; all changes to @a dest_wim made by
- * this function are rolled back on failure.
+ * If this function fails, all changes to @a dest_wim are rolled back.
*
- * Previous versions of this function did not allow exporting an image that had
- * been added by wimlib_add_image(). This is no longer the case; you may now
- * export an image regardless of how it was added.
- *
- * Regardless of whether this function succeeds or fails, no changes are made to
- * @a src_wim.
+ * No changes shall be made to @a src_wim by this function.
*
* Please note that no changes are committed to the underlying WIM file of @a
* dest_wim (if any) until wimlib_write() or wimlib_overwrite() is called.
extern int
wimlib_export_image(WIMStruct *src_wim, int src_image,
WIMStruct *dest_wim,
- const wimlib_utf8char *dest_name,
- const wimlib_utf8char *dest_description,
+ const wimlib_tchar *dest_name,
+ const wimlib_tchar *dest_description,
int export_flags,
WIMStruct **additional_swms,
unsigned num_additional_swms,
wimlib_progress_func_t progress_func);
+/**
+ * Extract zero or more files or directory trees from a WIM image.
+ *
+ * This generalizes the single-image extraction functionality of
+ * wimlib_extract_image() to allow extracting only the specified subsets of the
+ * image.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
+ * split WIM.
+ *
+ * @param image
+ * The 1-based number of the image in @a wim from which the files or
+ * directory trees are to be extracted. It cannot be ::WIMLIB_ALL_IMAGES.
+ *
+ * @param default_extract_flags
+ * Default extraction flags; the behavior shall be as if these flags had
+ * been specified in the ::wimlib_extract_command.extract_flags member in
+ * each extraction command, in combination with any flags already present.
+ *
+ * @param cmds
+ * An array of ::wimlib_extract_command structures that specifies the
+ * extractions to perform.
+ *
+ * @param num_cmds
+ * Number of commands in the @a cmds array.
+ *
+ * @param additional_swms
+ * Array of pointers to the ::WIMStruct for each additional part in the
+ * split WIM. Ignored if @a num_additional_swms is 0. The pointers do not
+ * need to be in any particular order, but they must include all parts of
+ * the split WIM other than the first part, which must be provided in the
+ * @a wim parameter.
+ *
+ * @param num_additional_swms
+ * Number of additional WIM parts provided in the @a additional_swms array.
+ * This number should be one less than the total number of parts in the
+ * split WIM. Set to 0 if the WIM is a standalone WIM.
+ *
+ * @param progress_func
+ * If non-NULL, a function that will be called periodically with the
+ * progress of the current operation.
+ *
+ * @return 0 on success; nonzero on error. The possible error codes include
+ * those documented as returned by wimlib_extract_image() as well as the
+ * following additional error codes:
+ *
+ * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
+ * The ::wimlib_extract_command.wim_source_path member in one of the
+ * extract commands did not exist in the WIM.
+ * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
+ * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified for an extraction command
+ * in which ::wimlib_extract_command.wim_source_path existed but was not a
+ * regular file or directory.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * ::WIMLIB_EXTRACT_FLAG_HARDLINK or ::WIMLIB_EXTRACT_FLAG_SYMLINK was
+ * specified for some commands but not all; or
+ * ::wimlib_extract_command.fs_dest_path was @c NULL or the empty string
+ * for one or more commands; or ::WIMLIB_EXTRACT_FLAG_RPFIX was specified
+ * for a command in which ::wimlib_extract_command.wim_source_path did not
+ * specify the root directory of the WIM image.
+ */
+extern int
+wimlib_extract_files(WIMStruct *wim,
+ int image,
+ int default_extract_flags,
+ const struct wimlib_extract_command *cmds,
+ size_t num_cmds,
+ WIMStruct **additional_swms,
+ unsigned num_additional_swms,
+ wimlib_progress_func_t progress_func);
+
/**
* Extracts an image, or all images, from a standalone or split WIM file to a
* directory or a NTFS volume.
*
- * Please see the manual page for the @c imagex program for more information
- * about the "normal" extraction mode versus the NTFS extraction mode
- * (entered by providing flag ::WIMLIB_EXTRACT_FLAG_NTFS).
+ * Please see the manual page for the @c wimlib-imagex program for more
+ * information about the "normal" extraction mode versus the NTFS extraction
+ * mode (entered by providing flag ::WIMLIB_EXTRACT_FLAG_NTFS).
*
* Extraction is done with one thread.
*
*/
extern int
wimlib_extract_image(WIMStruct *wim, int image,
- const wimlib_mbchar *target,
+ const wimlib_tchar *target,
int extract_flags,
WIMStruct **additional_swms,
unsigned num_additional_swms,
* A statically allocated string: "None", "LZX", "XPRESS", or "Invalid",
* respectively.
*/
-extern const wimlib_mbchar *
+extern const wimlib_tchar *
wimlib_get_compression_type_string(int ctype);
/**
* Pointer to a statically allocated string describing the error code,
* or @c NULL if the error code is not valid.
*/
-extern const wimlib_mbchar *
+extern const wimlib_tchar *
wimlib_get_error_string(enum wimlib_error_code code);
/**
* in addition, the string will become invalid if the description of the
* image is changed, the image is deleted, or the ::WIMStruct is destroyed.
*/
-extern const wimlib_utf8char *
+extern const wimlib_tchar *
wimlib_get_image_description(const WIMStruct *wim, int image);
/**
* the WIM to be unnamed, in which case an empty string will be returned
* when the corresponding name is requested.
*/
-extern const wimlib_utf8char *
+extern const wimlib_tchar *
wimlib_get_image_name(const WIMStruct *wim, int image);
/**
* Since wimlib 1.2.6: Initialization function for wimlib. This is not
* re-entrant. If you are calling wimlib functions concurrently in different
- * threads, then you must call this function serially first. Also, since wimlib
- * 1.3.0, you must call this function if the character encoding of the current
- * locale is not UTF-8. Otherwise, calling this function this function is not
- * required.
+ * threads, then you must call this function serially first.
+ *
+ * Since wimlib 1.3.0, you must call this function if the character encoding of
+ * the current locale is not UTF-8 and you do not want wimlib to assume a UTF-8
+ * encoding.
+ *
+ * Since wimlib 1.3.2, you must call this function if using the Windows-native
+ * build of the library so that certain functions can be dynamically loaded from
+ * system DLLs.
*
- * This function always returns 0.
+ * Since wimlib 1.3.3, this function takes the @a init_flags parameter.
+ *
+ * @param init_flags
+ * ::WIMLIB_INIT_FLAG_ASSUME_UTF8 if wimlib should assume that all input
+ * data, including filenames, are in UTF-8, and that UTF-8 data can be
+ * directly printed to the console.
+ *
+ * @return 0; other error codes may be returned in future releases.
*/
extern int
-wimlib_global_init();
+wimlib_global_init(int init_flags);
/**
* Since wimlib 1.2.6: Cleanup function for wimlib. This is not re-entrant.
* the empty string, @c false is returned.
*/
extern bool
-wimlib_image_name_in_use(const WIMStruct *wim, const wimlib_utf8char *name);
+wimlib_image_name_in_use(const WIMStruct *wim, const wimlib_tchar *name);
/**
* Joins a split WIM into a stand-alone one-part WIM.
* wimlib_join(), since it is possible to export all images from a split WIM.
*/
extern int
-wimlib_join(const wimlib_mbchar * const *swms,
+wimlib_join(const wimlib_tchar * const *swms,
unsigned num_swms,
- const wimlib_mbchar *output_path,
+ const wimlib_tchar *output_path,
int swm_open_flags,
int wim_write_flags,
wimlib_progress_func_t progress_func);
+/**
+ * Compress a chunk of a WIM resource using LZX compression.
+ *
+ * This function is exported for convenience only and need not be used.
+ *
+ * @param chunk
+ * Uncompressed data of the chunk.
+ * @param chunk_size
+ * Size of the uncompressed chunk, in bytes.
+ * @param out
+ * Pointer to output buffer of size at least (@a chunk_size - 1) bytes.
+ *
+ * @return
+ * The size of the compressed data written to @a out in bytes, or 0 if the
+ * data could not be compressed to (@a chunk_size - 1) bytes or fewer.
+ *
+ * As a special requirement, the compression code is optimized for the WIM
+ * format and therefore requires (@a chunk_size <= 32768).
+ */
+extern unsigned
+wimlib_lzx_compress(const void *chunk, unsigned chunk_size, void *out);
+
+/**
+ * Decompresses a block of LZX-compressed data as used in the WIM file format.
+ *
+ * Note that this will NOT work unmodified for LZX as used in the cabinet
+ * format, which is not the same as in the WIM format!
+ *
+ * This function is exported for convenience only and need not be used.
+ *
+ * @param compressed_data
+ * Pointer to the compressed data.
+ *
+ * @param compressed_len
+ * Length of the compressed data, in bytes.
+ *
+ * @param uncompressed_data
+ * Pointer to the buffer into which to write the uncompressed data.
+ *
+ * @param uncompressed_len
+ * Length of the uncompressed data. It must be 32768 bytes or less.
+ *
+ * @return
+ * 0 on success; non-zero on failure.
+ */
+extern int
+wimlib_lzx_decompress(const void *compressed_data, unsigned compressed_len,
+ void *uncompressed_data, unsigned uncompressed_len);
+
+
/**
* Mounts an image in a WIM file on a directory read-only or read-write.
*
* support mounting a split WIM read-only.
*/
extern int
-wimlib_mount_image(WIMStruct *wim, int image, const wimlib_mbchar *dir,
- int mount_flags, WIMStruct **additional_swms,
+wimlib_mount_image(WIMStruct *wim,
+ int image,
+ const wimlib_tchar *dir,
+ int mount_flags,
+ WIMStruct **additional_swms,
unsigned num_additional_swms,
- const wimlib_mbchar *staging_dir);
+ const wimlib_tchar *staging_dir);
/**
* Opens a WIM file and creates a ::WIMStruct for it.
* The XML data for @a wim_file is invalid.
*/
extern int
-wimlib_open_wim(const wimlib_mbchar *wim_file, int open_flags,
- WIMStruct **wim_ret, wimlib_progress_func_t progress_func);
+wimlib_open_wim(const wimlib_tchar *wim_file,
+ int open_flags,
+ WIMStruct **wim_ret,
+ wimlib_progress_func_t progress_func);
/**
* Overwrites the file that the WIM was originally read from, with changes made.
* and while abnormal termination of the program will result in extra data
* appended to the original WIM, it should still be a valid WIM.
*
+ * If this function completes successfully, no functions should be called on @a
+ * wim other than wimlib_free(). You must use wimlib_open_wim() to read the WIM
+ * file anew.
+ *
* @param wim
* Pointer to the ::WIMStruct for the WIM file to write. There may have
* been in-memory changes made to it, which are then reflected in the
* @retval ::WIMLIB_ERR_RENAME
* The temporary file that the WIM was written to could not be renamed to
* the original filename of @a wim.
- * @retval ::WIMLIB_ERR_REOPEN
- * The WIM was overwritten successfully, but it could not be re-opened
- * read-only. Therefore, the resources in the WIM can no longer be
- * accessed, so this limits the functions that can be called on @a wim
- * before calling wimlib_free().
*/
extern int
wimlib_overwrite(WIMStruct *wim, int write_flags, unsigned num_threads,
*/
extern int
wimlib_resolve_image(WIMStruct *wim,
- const wimlib_utf8char *image_name_or_num);
+ const wimlib_tchar *image_name_or_num);
/**
* Sets which image in the WIM is marked as bootable.
*/
extern int
wimlib_set_image_descripton(WIMStruct *wim, int image,
- const wimlib_utf8char *description);
+ const wimlib_tchar *description);
/**
* Changes what is written in the \<FLAGS\> element in the WIM XML data
* Failed to allocate the memory needed to duplicate the @a flags string.
*/
extern int wimlib_set_image_flags(WIMStruct *wim, int image,
- const wimlib_utf8char *flags);
+ const wimlib_tchar *flags);
/**
* Changes the name of an image in the WIM.
* Failed to allocate the memory needed to duplicate the @a name string.
*/
extern int wimlib_set_image_name(WIMStruct *wim, int image,
- const wimlib_utf8char *name);
+ const wimlib_tchar *name);
/**
* Set the functions that wimlib uses to allocate and free memory.
* compressed resources re-compressed.
*/
extern int
-wimlib_split(WIMStruct *wim, const wimlib_mbchar *swm_name,
- size_t part_size, int write_flags,
+wimlib_split(WIMStruct *wim,
+ const wimlib_tchar *swm_name,
+ size_t part_size,
+ int write_flags,
wimlib_progress_func_t progress_func);
/**
* been made to files in the staging directory.
*/
extern int
-wimlib_unmount_image(const wimlib_mbchar *dir, int unmount_flags,
+wimlib_unmount_image(const wimlib_tchar *dir,
+ int unmount_flags,
wimlib_progress_func_t progress_func);
+/**
+ * Update a WIM image by adding, deleting, and/or renaming files or directories.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct for the WIM file to update.
+ * @param image
+ * The 1-based index of the image in the WIM to update. It cannot be
+ * ::WIMLIB_ALL_IMAGES.
+ * @param cmds
+ * An array of ::wimlib_update_command's that specify the update operations
+ * to perform.
+ * @param num_cmds
+ * Number of commands in @a cmds.
+ * @param update_flags
+ * Reserved; must be 0.
+ * @param progress_func
+ * If non-NULL, a function that will be called periodically with the
+ * progress of the current operation.
+ *
+ * @return 0 on success; nonzero on error. On failure, some but not all of the
+ * update commands may have been executed. No individual update command will
+ * have been partially executed. Possible error codes include:
+ *
+ * @retval ::WIMLIB_ERR_DECOMPRESSION
+ * Failed to decompress the metadata resource from @a image in @a wim.
+ * @retval ::WIMLIB_ERR_INVALID_CAPTURE_CONFIG
+ * The capture configuration structure specified for an add command was
+ * invalid.
+ * @retval ::WIMLIB_ERR_INVALID_DENTRY
+ * A directory entry for @a image in @a wim is invalid.
+ * @retval ::WIMLIB_ERR_INVALID_IMAGE
+ * @a image did not specify a single, existing image in @a wim.
+ * @retval ::WIMLIB_ERR_INVALID_OVERLAY
+ * Attempted to perform an add command that conflicted with previously
+ * existing files in the WIM when an overlay was attempted.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * An unknown operation type was specified in the update commands; or,
+ * attempted to execute an add command where ::WIMLIB_ADD_FLAG_NTFS was set
+ * in the @a add_flags, but the same image had previously already been
+ * added from a NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
+ * ::WIMLIB_ADD_FLAG_NORPFIX were specified in the @a add_flags for one add
+ * command; or, ::WIMLIB_ADD_FLAG_NTFS or ::WIMLIB_ADD_FLAG_RPFIX were
+ * specified in the @a add_flags for an add command in which @a
+ * wim_target_path was not the root directory of the WIM image.
+ * @retval ::WIMLIB_ERR_INVALID_REPARSE_DATA
+ * (Windows only): While executing an add command, tried to capture a
+ * reparse point with invalid data.
+ * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
+ * The metadata resource for @a image in @a wim is invalid.
+ * @retval ::WIMLIB_ERR_INVALID_SECURITY_DATA
+ * The security data for image @a image in @a wim is invalid.
+ * @retval ::WIMLIB_ERR_IS_DIRECTORY
+ * A delete command without ::WIMLIB_DELETE_FLAG_RECURSIVE specified was
+ * for a WIM path that corresponded to a directory; or, a rename command
+ * attempted to rename a directory to a non-directory.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Failed to allocate needed memory.
+ * @retval ::WIMLIB_ERR_NOTDIR
+ * A rename command attempted to rename a directory to a non-directory; or,
+ * an add command was executed that attempted to set the root of the WIM
+ * image as a non-directory.
+ * @retval ::WIMLIB_ERR_NOTEMPTY
+ * A rename command attempted to rename a directory to a non-empty
+ * directory.
+ * @retval ::WIMLIB_ERR_NTFS_3G
+ * While executing an add command with ::WIMLIB_ADD_FLAG_NTFS specified, an
+ * error occurred while reading data from the NTFS volume using libntfs-3g.
+ * @retval ::WIMLIB_ERR_OPEN
+ * Failed to open a file to be captured while executing an add command.
+ * @retval ::WIMLIB_ERR_OPENDIR
+ * Failed to open a file to be captured while executing an add command.
+ * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
+ * A delete command without ::WIMLIB_DELETE_FLAG_FORCE specified was for a
+ * WIM path that did not exist; or, a component of the path of the source
+ * or destination of a rename command was used as a directory but was not,
+ * in fact, a directory.
+ * @retval ::WIMLIB_ERR_READ
+ * Failed to read the metadata resource for @a image in @a wim; or, while
+ * executing an add command, failed to read data from a file or directory
+ * to be captured.
+ * @retval ::WIMLIB_ERR_READLINK
+ * While executing an add command, failed to read the target of a symbolic
+ * link or junction point.
+ * @retval ::WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED
+ * (Windows only) Failed to perform a reparse point fixup because of
+ * problems with the data of a reparse point.
+ * @retval ::WIMLIB_ERR_SPECIAL_FILE
+ * While executing an add command, attempted to capture a file that was not
+ * a supported file type, such as a regular file, directory, symbolic link,
+ * or (on Windows) a reparse point.
+ * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
+ * @a wim is part of a split WIM. Updating a split WIM is unsupported.
+ * @retval ::WIMLIB_ERR_STAT
+ * While executing an add command, failed to get attributes for a file or
+ * directory.
+ * @retval ::WIMLIB_ERR_UNSUPPORTED
+ * ::WIMLIB_ADD_FLAG_NTFS was specified in the @a add_flags for an update
+ * command, but wimlib was configured with the @c --without-ntfs-3g flag;
+ * or, the platform is Windows and either the ::WIMLIB_ADD_FLAG_UNIX_DATA
+ * or the ::WIMLIB_ADD_FLAG_DEREFERENCE flags were specified in the @a
+ * add_flags for an update command.
+ */
+extern int
+wimlib_update_image(WIMStruct *wim,
+ int image,
+ const struct wimlib_update_command *cmds,
+ size_t num_cmds,
+ int update_flags,
+ wimlib_progress_func_t progress_func);
+
/**
* Writes a standalone WIM to a file.
*
* path.
*/
extern int
-wimlib_write(WIMStruct *wim, const wimlib_mbchar *path, int image,
- int write_flags, unsigned num_threads,
+wimlib_write(WIMStruct *wim,
+ const wimlib_tchar *path,
+ int image,
+ int write_flags,
+ unsigned num_threads,
wimlib_progress_func_t progress_func);
+/**
+ * This function is equivalent to wimlib_lzx_compress(), but instead compresses
+ * the data using "XPRESS" compression.
+ */
+extern unsigned
+wimlib_xpress_compress(const void *chunk, unsigned chunk_size, void *out);
+
+/**
+ * This function is equivalent to wimlib_lzx_decompress(), but instead assumes
+ * the data is compressed using "XPRESS" compression.
+ */
+extern int
+wimlib_xpress_decompress(const void *compressed_data, unsigned compressed_len,
+ void *uncompressed_data, unsigned uncompressed_len);
+
#endif /* _WIMLIB_H */
git://wimlib.net / wimlib / blobdiff