-#if defined(__CYGWIN__) || defined(__WIN32__)
-
-static int win32_set_reparse_data(HANDLE h,
- u32 reparse_tag,
- const struct wim_lookup_table_entry *lte,
- const wchar_t *path)
-{
- int ret;
- u8 *buf;
- size_t len;
-
- if (!lte) {
- WARNING("\"%ls\" is marked as a reparse point but had no reparse data",
- path);
- return 0;
- }
- len = wim_resource_size(lte);
- if (len > 16 * 1024 - 8) {
- WARNING("\"%ls\": reparse data too long!", path);
- return 0;
- }
-
- /* The WIM stream omits the ReparseTag and ReparseDataLength fields, so
- * leave 8 bytes of space for them at the beginning of the buffer, then
- * set them manually. */
- buf = alloca(len + 8);
- ret = read_full_wim_resource(lte, buf + 8, 0);
- if (ret)
- return ret;
- *(u32*)(buf + 0) = reparse_tag;
- *(u16*)(buf + 4) = len;
- *(u16*)(buf + 6) = 0;
-
- /* Set the reparse data on the open file using the
- * FSCTL_SET_REPARSE_POINT ioctl.
- *
- * There are contradictions in Microsoft's documentation for this:
- *
- * "If hDevice was opened without specifying FILE_FLAG_OVERLAPPED,
- * lpOverlapped is ignored."
- *
- * --- So setting lpOverlapped to NULL is okay since it's ignored.
- *
- * "If lpOverlapped is NULL, lpBytesReturned cannot be NULL. Even when an
- * operation returns no output data and lpOutBuffer is NULL,
- * DeviceIoControl makes use of lpBytesReturned. After such an
- * operation, the value of lpBytesReturned is meaningless."
- *
- * --- So lpOverlapped not really ignored, as it affects another
- * parameter. This is the actual behavior: lpBytesReturned must be
- * specified, even though lpBytesReturned is documented as:
- *
- * "Not used with this operation; set to NULL."
- */
- DWORD bytesReturned;
- if (!DeviceIoControl(h, FSCTL_SET_REPARSE_POINT, buf, len + 8,
- NULL, 0,
- &bytesReturned /* lpBytesReturned */,
- NULL /* lpOverlapped */))
- {
- DWORD err = GetLastError();
- ERROR("Failed to set reparse data on \"%ls\"", path);
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- return 0;
-}
-
-
-static int win32_extract_chunk(const u8 *buf, size_t len, u64 offset, void *arg)
-{
- HANDLE hStream = arg;
-
- DWORD nbytes_written;
- wimlib_assert(len <= 0xffffffff);
-
- if (!WriteFile(hStream, buf, len, &nbytes_written, NULL) ||
- nbytes_written != len)
- {
- DWORD err = GetLastError();
- ERROR("WriteFile(): write error");
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- return 0;
-}
-
-static int do_win32_extract_stream(HANDLE hStream, struct wim_lookup_table_entry *lte)
-{
- return extract_wim_resource(lte, wim_resource_size(lte),
- win32_extract_chunk, hStream);
-}
-
-static int win32_extract_stream(const struct wim_inode *inode,
- const wchar_t *path,
- const wchar_t *stream_name_utf16,
- struct wim_lookup_table_entry *lte)
-{
- wchar_t *stream_path;
- HANDLE h;
- int ret;
- DWORD err;
- DWORD creationDisposition = CREATE_ALWAYS;
-
- if (stream_name_utf16) {
- /* Named stream. Create a buffer that contains the UTF-16LE
- * string [./]@path:@stream_name_utf16. This is needed to
- * create and open the stream using CreateFileW(). I'm not
- * aware of any other APIs to do this. Note: note that the
- * '$DATA' suffix seems to be unneeded; Additional note: a "./"
- * prefix needs to be added when the path is not absolute to
- * avoid ambiguity with drive letters. */
- size_t stream_path_nchars;
- size_t path_nchars;
- size_t stream_name_nchars;
- const wchar_t *prefix;
-
- path_nchars = wcslen(path);
- stream_name_nchars = wcslen(stream_name_utf16);
- stream_path_nchars = path_nchars + 1 + stream_name_nchars;
- if (path[0] != L'/' && path[1] != L'\\') {
- prefix = L"./";
- stream_path_nchars += 2;
- } else {
- prefix = L"";
- }
- stream_path = alloca((stream_path_nchars + 1) * sizeof(wchar_t));
- swprintf(stream_path, stream_path_nchars + 1, L"%ls%ls:%ls",
- prefix, path, stream_name_utf16);
- } else {
- /* Unnamed stream; it's path is just the path to the file
- * itself. */
- stream_path = (wchar_t*)path;
-
- /* Directories must be created with CreateDirectoryW(). Then
- * the call to CreateFileW() will merely open the directory that
- * was already created rather than creating a new file. */
- if (inode->i_attributes & FILE_ATTRIBUTE_DIRECTORY) {
- if (!CreateDirectoryW(stream_path, NULL)) {
- err = GetLastError();
- if (err != ERROR_ALREADY_EXISTS) {
- ERROR("Failed to create directory \"%ls\"",
- path);
- win32_error(err);
- ret = WIMLIB_ERR_MKDIR;
- goto fail;
- }
- }
- DEBUG("Created directory \"%ls\"", stream_path);
- if (!(inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT)) {
- ret = 0;
- goto out;
- }
- creationDisposition = OPEN_EXISTING;
- }
- }
-
- DEBUG("Opening \"%ls\"", stream_path);
- h = CreateFileW(stream_path,
- GENERIC_WRITE | WRITE_OWNER | WRITE_DAC,
- 0,
- NULL,
- creationDisposition,
- FILE_FLAG_OPEN_REPARSE_POINT |
- FILE_FLAG_BACKUP_SEMANTICS |
- inode->i_attributes,
- NULL);
- if (h == INVALID_HANDLE_VALUE) {
- err = GetLastError();
- ERROR("Failed to create \"%ls\"", stream_path);
- win32_error(err);
- ret = WIMLIB_ERR_OPEN;
- goto fail;
- }
-
- if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT &&
- stream_name_utf16 == NULL)
- {
- DEBUG("Setting reparse data on \"%ls\"", path);
- ret = win32_set_reparse_data(h, inode->i_reparse_tag, lte, path);
- if (ret)
- goto fail_close_handle;
- } else {
- if (lte) {
- DEBUG("Extracting \"%ls\" (len = %zu)",
- stream_path, wim_resource_size(lte));
- ret = do_win32_extract_stream(h, lte);
- if (ret)
- goto fail_close_handle;
- }
- }
-
- DEBUG("Closing \"%ls\"", stream_path);
- if (!CloseHandle(h)) {
- err = GetLastError();
- ERROR("Failed to close \"%ls\"", stream_path);
- win32_error(err);
- ret = WIMLIB_ERR_WRITE;
- goto fail;
- }
- ret = 0;
- goto out;
-fail_close_handle:
- CloseHandle(h);
-fail:
- ERROR("Error extracting %ls", stream_path);
-out:
- return ret;
-}
-
-/*
- * Creates a file, directory, or reparse point and extracts all streams to it
- * (unnamed data stream and/or reparse point stream, plus any alternate data
- * streams). This in Win32-specific code.
- *
- * @inode: WIM inode for this file or directory.
- * @path: UTF-16LE external path to extract the inode to.
- *
- * Returns 0 on success; nonzero on failure.
- */
-static int win32_extract_streams(struct wim_inode *inode,
- const wchar_t *path)
-{
- struct wim_lookup_table_entry *unnamed_lte;
- int ret;
-
- unnamed_lte = inode_unnamed_lte_resolved(inode);
- ret = win32_extract_stream(inode, path, NULL, unnamed_lte);
- if (ret)
- goto out;
- for (u16 i = 0; i < inode->i_num_ads; i++) {
- const struct wim_ads_entry *ads_entry = &inode->i_ads_entries[i];
- if (ads_entry->stream_name_len != 0) {
- /* Skip special UNIX data entries (see documentation for
- * WIMLIB_ADD_IMAGE_FLAG_UNIX_DATA) */
- if (ads_entry->stream_name_len == WIMLIB_UNIX_DATA_TAG_LEN
- && !memcmp(ads_entry->stream_name_utf8,
- WIMLIB_UNIX_DATA_TAG,
- WIMLIB_UNIX_DATA_TAG_LEN))
- continue;
- ret = win32_extract_stream(inode,
- path,
- (const wchar_t*)ads_entry->stream_name,
- ads_entry->lte);
- if (ret)
- break;
- }
- }
-out:
- return ret;
-}
-
-/*
- * Sets the security descriptor on an extracted file. This is Win32-specific
- * code.
- *
- * @inode: The WIM inode that was extracted and has a security descriptor.
- * @path: UTF-16LE external path that the inode was extracted to.
- * @sd: Security data for the WIM image.
- * @path_utf8: @path in UTF-8 for error messages only.
- *
- * Returns 0 on success; nonzero on failure.
- */
-static int win32_set_security_data(const struct wim_inode *inode,
- const wchar_t *path,
- const struct wim_security_data *sd)
-{
- SECURITY_INFORMATION securityInformation = DACL_SECURITY_INFORMATION |
- SACL_SECURITY_INFORMATION |
- OWNER_SECURITY_INFORMATION |
- GROUP_SECURITY_INFORMATION;
- if (!SetFileSecurityW(path, securityInformation,
- (PSECURITY_DESCRIPTOR)sd->descriptors[inode->i_security_id]))
- {
- DWORD err = GetLastError();
- ERROR("Can't set security descriptor on \"%ls\"", path);
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- return 0;
-}
-
-#else /* __CYGWIN__ || __WIN32__ */
-static int extract_regular_file_linked(struct wim_dentry *dentry,
- const char *output_path,
- struct apply_args *args,
- struct wim_lookup_table_entry *lte)
-{
- /* This mode overrides the normal hard-link extraction and
- * instead either symlinks or hardlinks *all* identical files in
- * the WIM, even if they are in a different image (in the case
- * of a multi-image extraction) */
-
- if (args->extract_flags & WIMLIB_EXTRACT_FLAG_HARDLINK) {
- if (link(lte->extracted_file, output_path) != 0) {
- ERROR_WITH_ERRNO("Failed to hard link "
- "`%s' to `%s'",
- output_path, lte->extracted_file);
- return WIMLIB_ERR_LINK;
- }
- } else {
- int num_path_components;
- int num_output_dir_path_components;
- size_t extracted_file_len;
- char *p;
- const char *p2;
- size_t i;
-
- num_path_components =
- get_num_path_components(dentry->full_path_utf8) - 1;
- num_output_dir_path_components =
- get_num_path_components(args->target);
-
- if (args->extract_flags & WIMLIB_EXTRACT_FLAG_MULTI_IMAGE) {
- num_path_components++;
- num_output_dir_path_components--;
- }
- extracted_file_len = strlen(lte->extracted_file);
-
- char buf[extracted_file_len + 3 * num_path_components + 1];
- p = &buf[0];
-
- for (i = 0; i < num_path_components; i++) {
- *p++ = '.';
- *p++ = '.';
- *p++ = '/';
- }
- p2 = lte->extracted_file;
- while (*p2 == '/')
- p2++;
- while (num_output_dir_path_components--)
- p2 = path_next_part(p2, NULL);
- strcpy(p, p2);
- if (symlink(buf, output_path) != 0) {
- ERROR_WITH_ERRNO("Failed to symlink `%s' to "
- "`%s'",
- buf, lte->extracted_file);
- return WIMLIB_ERR_LINK;
- }
- }
- return 0;
-}
-
-static int symlink_apply_unix_data(const char *link,
- const struct wimlib_unix_data *unix_data)
-{
- if (lchown(link, unix_data->uid, unix_data->gid)) {
- if (errno == EPERM) {
- /* Ignore */
- WARNING_WITH_ERRNO("failed to set symlink UNIX owner/group");
- } else {
- ERROR_WITH_ERRNO("failed to set symlink UNIX owner/group");
- return WIMLIB_ERR_INVALID_DENTRY;
- }
- }
- return 0;
-}
-
-static int fd_apply_unix_data(int fd, const struct wimlib_unix_data *unix_data)
-{
- if (fchown(fd, unix_data->uid, unix_data->gid)) {
- if (errno == EPERM) {
- WARNING_WITH_ERRNO("failed to set file UNIX owner/group");
- /* Ignore? */
- } else {
- ERROR_WITH_ERRNO("failed to set file UNIX owner/group");
- return WIMLIB_ERR_INVALID_DENTRY;
- }
- }
-
- if (fchmod(fd, unix_data->mode)) {
- if (errno == EPERM) {
- WARNING_WITH_ERRNO("failed to set UNIX file mode");
- /* Ignore? */
- } else {
- ERROR_WITH_ERRNO("failed to set UNIX file mode");
- return WIMLIB_ERR_INVALID_DENTRY;
- }
- }
- return 0;
-}
-
-static int dir_apply_unix_data(const char *dir,
- const struct wimlib_unix_data *unix_data)
-{
- int dfd = open(dir, O_RDONLY);
- int ret;
- if (dfd >= 0) {
- ret = fd_apply_unix_data(dfd, unix_data);
- if (close(dfd)) {
- ERROR_WITH_ERRNO("can't close directory `%s'", dir);
- ret = WIMLIB_ERR_MKDIR;
- }
- } else {
- ERROR_WITH_ERRNO("can't open directory `%s'", dir);
- ret = WIMLIB_ERR_MKDIR;
- }
- return ret;
-}
-
-static int extract_regular_file_unlinked(struct wim_dentry *dentry,
- struct apply_args *args,
- const char *output_path,
- struct wim_lookup_table_entry *lte)
-{
- /* Normal mode of extraction. Regular files and hard links are
- * extracted in the way that they appear in the WIM. */
-
- int out_fd;
- int ret;
- struct wim_inode *inode = dentry->d_inode;
-
- if (!((args->extract_flags & WIMLIB_EXTRACT_FLAG_MULTI_IMAGE)
- && (args->extract_flags & (WIMLIB_EXTRACT_FLAG_SYMLINK |
- WIMLIB_EXTRACT_FLAG_HARDLINK))))
- {
- /* If the dentry is part of a hard link set of at least 2
- * dentries and one of the other dentries has already been
- * extracted, make a hard link to the file corresponding to this
- * already-extracted directory. Otherwise, extract the file and
- * set the inode->i_extracted_file field so that other dentries
- * in the hard link group can link to it. */
- if (inode->i_nlink > 1) {
- if (inode->i_extracted_file) {
- DEBUG("Extracting hard link `%s' => `%s'",
- output_path, inode->i_extracted_file);
- if (link(inode->i_extracted_file, output_path) != 0) {
- ERROR_WITH_ERRNO("Failed to hard link "
- "`%s' to `%s'",
- output_path,
- inode->i_extracted_file);
- return WIMLIB_ERR_LINK;
- }
- return 0;
- }
- FREE(inode->i_extracted_file);
- inode->i_extracted_file = STRDUP(output_path);
- if (!inode->i_extracted_file) {
- ERROR("Failed to allocate memory for filename");
- return WIMLIB_ERR_NOMEM;
- }
- }
- }
-
- /* Extract the contents of the file to @output_path. */
-
- out_fd = open(output_path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
- if (out_fd == -1) {
- ERROR_WITH_ERRNO("Failed to open the file `%s' for writing",
- output_path);
- return WIMLIB_ERR_OPEN;
- }
-
- if (!lte) {
- /* Empty file with no lookup table entry */
- DEBUG("Empty file `%s'.", output_path);
- ret = 0;
- goto out_extract_unix_data;
- }
-
- ret = extract_wim_resource_to_fd(lte, out_fd, wim_resource_size(lte));
- if (ret != 0) {
- ERROR("Failed to extract resource to `%s'", output_path);
- goto out;
- }
-
-out_extract_unix_data:
- if (args->extract_flags & WIMLIB_EXTRACT_FLAG_UNIX_DATA) {
- struct wimlib_unix_data unix_data;
- ret = inode_get_unix_data(inode, &unix_data, NULL);
- if (ret > 0)
- ;
- else if (ret < 0)
- ret = 0;
- else
- ret = fd_apply_unix_data(out_fd, &unix_data);
- if (ret != 0)
- goto out;
- }
- if (lte)
- args->progress.extract.completed_bytes += wim_resource_size(lte);
-out:
- if (close(out_fd) != 0) {
- ERROR_WITH_ERRNO("Failed to close file `%s'", output_path);
- if (ret == 0)
- ret = WIMLIB_ERR_WRITE;
- }
- return ret;
-}
-
-static int extract_regular_file(struct wim_dentry *dentry,
- struct apply_args *args,
- const char *output_path)
-{
- struct wim_lookup_table_entry *lte;
- const struct wim_inode *inode = dentry->d_inode;
-
- lte = inode_unnamed_lte_resolved(inode);
-
- if (lte && (args->extract_flags & (WIMLIB_EXTRACT_FLAG_SYMLINK |
- WIMLIB_EXTRACT_FLAG_HARDLINK)))
- {
- if (lte->extracted_file) {
- return extract_regular_file_linked(dentry, output_path, args, lte);
- } else {
- lte->extracted_file = STRDUP(output_path);
- if (!lte->extracted_file)
- return WIMLIB_ERR_NOMEM;
- }
- }
- return extract_regular_file_unlinked(dentry, args, output_path, lte);
-}
-
-static int extract_symlink(struct wim_dentry *dentry,
- struct apply_args *args,
- const char *output_path)