*/
/*
- * Copyright (C) 2012, 2013 Eric Biggers
+ * Copyright (C) 2012, 2013, 2014 Eric Biggers
*
* This file is part of wimlib, a library for working with WIM files.
*
*
* @section sec_intro Introduction
*
- * This is the documentation for the library interface of wimlib 1.6.1, a C
+ * This is the documentation for the library interface of wimlib 1.7.0, a C
* library for creating, modifying, extracting, and mounting files in the
* Windows Imaging Format. This documentation is intended for developers only.
* If you have installed wimlib and want to know how to use the @b wimlib-imagex
* documented in the man page for @b wimlib-imagex.
*
* - The old WIM format from Vista pre-releases is not supported.
- * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
+ * - wimlib does not provide a clone of the @b PEImg tool, or the @b DISM
* functionality other than that already present in @b ImageX, that allows you
* to make certain Windows-specific modifications to a Windows PE image, such
* as adding a driver or Windows component. Such a tool could be implemented
*
* @brief Extract files, directories, and images from a WIM.
*
- * wimlib_extract_image() extracts, or "applies", an image from a WIM
- * (represented, as usual, by a ::WIMStruct). This normally extracts the image
- * to a directory, but when supported by the build of the library there is also
- * a special NTFS volume extraction mode (entered when
- * ::WIMLIB_EXTRACT_FLAG_NTFS is specified) that allows extracting a WIM image
- * directly to an unmounted NTFS volume. Various other flags allow further
- * customization of image extraction.
+ * wimlib_extract_image() extracts, or "applies", an image from a WIM,
+ * represented by a ::WIMStruct. This normally extracts the image to a
+ * directory, but when supported by the build of the library there is also a
+ * special NTFS volume extraction mode (entered when ::WIMLIB_EXTRACT_FLAG_NTFS
+ * is specified) that allows extracting a WIM image directly to an unmounted
+ * NTFS volume. Various other flags allow further customization of image
+ * extraction.
*
- * Another function, wimlib_extract_files(), is also provided. It can extract
- * certain files or directories from a WIM image, instead of a full image.
+ * wimlib_extract_paths() and wimlib_extract_pathlist() allow extracting a list
+ * of (possibly wildcard) paths from a WIM image.
*
- * wimlib_extract_paths() and wimlib_extract_pathlist() allow extracting a set
- * of paths from a WIM image in a manner that may be easier to use than
- * wimlib_extract_files(), and also allow wildcard patterns.
+ * wimlib_extract_image_from_pipe() extracts an image from a pipable WIM sent
+ * over a pipe; see @ref subsec_pipable_wims.
*
- * wimlib_extract_image_from_pipe() allows an image to be extracted from a
- * pipable WIM sent over a pipe; see @ref subsec_pipable_wims.
- *
- * Note that some details of how image extraction/application works are
- * documented more fully in the manual pages for <b>wimlib-imagex apply</b> and
- * <b>wimlib-imagex extract</b>.
+ * Some details of how WIM extraction works are documented more fully in the
+ * manual pages for <b>wimlib-imagex apply</b> and <b>wimlib-imagex extract</b>.
*/
/** @defgroup G_mounting_wim_images Mounting WIM images
* image read-write is an alternative to calling wimlib_update_image().
*/
-/** @defgroup G_progress Progress Messages
+/**
+ * @defgroup G_progress Progress Messages
*
* @brief Track the progress of long WIM operations.
*
- * When operating on large archives, operations such as extraction will
- * naturally take a while to complete. Because of this and to improve the
- * potential user-friendliness of library clients, a number of functions take a
- * pointer to a progress function of type ::wimlib_progress_func_t. This
- * function will be called periodically during the WIM operation(s) to report on
- * the progress of the operation (for example, how many bytes have been written
- * so far).
+ * Library users can provide a progress function which will be called
+ * periodically during operations such as extracting a WIM image or writing a
+ * WIM image. A ::WIMStruct can have a progress function of type
+ * ::wimlib_progress_func_t associated with it by calling
+ * wimlib_register_progress_function() or by opening the ::WIMStruct using
+ * wimlib_open_wim_with_progress(). Once this is done, the progress function
+ * will be called automatically during many operations, such as
+ * wimlib_extract_image() and wimlib_write().
+ *
+ * Some functions that do not operate directly on a user-provided ::WIMStruct,
+ * such as wimlib_join(), also take the progress function directly using an
+ * extended version of the function, such as wimlib_join_with_progress().
+ *
+ * In wimlib v1.7.0 and later, progress functions are no longer just
+ * unidirectional. You can now return ::WIMLIB_PROGRESS_STATUS_ABORT to cause
+ * the current operation to be aborted. wimlib v1.7.0 also added the third
+ * argument to ::wimlib_progress_func_t, which is a user-supplied context.
*/
/** @defgroup G_writing_and_overwriting_wims Writing and Overwriting WIMs
* created from one of these on-disk files initially only partially represents
* the full WIM and needs to, in effect, be logically combined with other
* ::WIMStruct's before performing certain operations, such as extracting files
- * with wimlib_extract_image() or wimlib_extract_files(). This is done by
+ * with wimlib_extract_image() or wimlib_extract_paths(). This is done by
* calling wimlib_reference_resource_files() or wimlib_reference_resources().
*
* wimlib_write() can create delta WIMs as well as standalone WIMs, but a
#define WIMLIB_MAJOR_VERSION 1
/** Minor version of the library (for example, the 2 in 1.2.5). */
-#define WIMLIB_MINOR_VERSION 6
+#define WIMLIB_MINOR_VERSION 7
/** Patch version of the library (for example, the 5 in 1.2.5). */
-#define WIMLIB_PATCH_VERSION 1
+#define WIMLIB_PATCH_VERSION 0
#ifdef __cplusplus
extern "C" {
# define WIMLIB_WIM_PATH_SEPARATOR_STRING "/"
#endif
+/** Use this to specify the root directory of the WIM image. */
+#define WIMLIB_WIM_ROOT_PATH WIMLIB_WIM_PATH_SEPARATOR_STRING
+
+/** Use this to test if the specified path refers to the root directory of the
+ * WIM image. */
+#define WIMLIB_IS_WIM_ROOT_PATH(path) \
+ ((path)[0] == WIMLIB_WIM_PATH_SEPARATOR && \
+ (path)[1] == 0)
+
#ifdef __GNUC__
# define _wimlib_deprecated __attribute__((deprecated))
#else
/** The WIM does not include any compressed resources. */
WIMLIB_COMPRESSION_TYPE_NONE = 0,
- /** Compressed resources in the WIM use LZX compression. */
- WIMLIB_COMPRESSION_TYPE_LZX = 1,
-
/** Compressed resources in the WIM use XPRESS compression. */
- WIMLIB_COMPRESSION_TYPE_XPRESS = 2,
+ WIMLIB_COMPRESSION_TYPE_XPRESS = 1,
+
+ /** Compressed resources in the WIM use LZX compression. */
+ WIMLIB_COMPRESSION_TYPE_LZX = 2,
/** Compressed resources in the WIM use LZMS compression. Note: LZMS
* compression is only compatible with wimlib v1.6.0 and later and with
enum wimlib_progress_msg {
/** A WIM image is about to be extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
+ * ::wimlib_progress_info.extract. This message is received once per
+ * image for calls to wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe(). */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN = 0,
- /** One or more file or directory trees within a WIM image (not the full
- * image) is about to be extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
-
- /** The directory structure of the WIM image is about to be extracted.
- * @p info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
-
- /** The directory structure of the WIM image has been successfully
- * extracted. @p info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
+ /** One or more file or directory trees within a WIM image is about to
+ * be extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This message is received only once per wimlib_extract_paths() and
+ * wimlib_extract_pathlist(), since wimlib combines all paths into a
+ * single extraction operation for optimization purposes. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN = 1,
/** File data is currently being extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
+ * ::wimlib_progress_info.extract. This is the main message to track
+ * the progress of an extraction operation. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS = 4,
/** Starting to read a new part of a split pipable WIM over the pipe.
* @p info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
-
- /** All the WIM files and directories have been extracted, and
- * timestamps are about to be applied. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS,
-
- /** A WIM image has been successfully extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END,
-
- /** A file or directory tree within a WIM image (not the full image) has
- * been successfully extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
-
- /** The directory or NTFS volume is about to be scanned to build a tree
- * of WIM dentries in-memory. @p info will point to
- * ::wimlib_progress_info.scan. */
- WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
-
- /** A directory or file is being scanned. @p info will point to
+ WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN = 5,
+
+ /** Confirms that the image has been successfully extracted. @p info
+ * will point to ::wimlib_progress_info.extract. This is paired with
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END = 7,
+
+ /** Confirms that the files or directory trees have been successfully
+ * extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This is paired with ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END = 8,
+
+ /** The directory or NTFS volume is about to be scanned for metadata.
+ * @p info will point to ::wimlib_progress_info.scan. This message is
+ * received once per call to wimlib_add_image(), or once per capture
+ * source passed to wimlib_add_image_multisource(), or once per add
+ * command passed to wimlib_update_image(). */
+ WIMLIB_PROGRESS_MSG_SCAN_BEGIN = 9,
+
+ /** A directory or file has been scanned. @p info will point to
* ::wimlib_progress_info.scan, and its @p cur_path member will be
- * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE
- * is passed to wimlib_add_image(). */
- WIMLIB_PROGRESS_MSG_SCAN_DENTRY,
+ * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE has
+ * been specified. */
+ WIMLIB_PROGRESS_MSG_SCAN_DENTRY = 10,
- /** The directory or NTFS volume has been successfully scanned, and a
- * tree of WIM dentries has been built in-memory. @p info will point to
- * ::wimlib_progress_info.scan. */
- WIMLIB_PROGRESS_MSG_SCAN_END,
+ /** Confirms that the directory or NTFS volume has been successfully
+ * scanned. @p info will point to ::wimlib_progress_info.scan. This is
+ * paired with a previous ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN message,
+ * possibly with many intervening ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY
+ * messages. */
+ WIMLIB_PROGRESS_MSG_SCAN_END = 11,
/** File resources ("streams") are currently being written to the WIM.
- * @p info will point to ::wimlib_progress_info.write_streams. */
- WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
-
- /**
- * The metadata resource for each image is about to be written to the
- * WIM. @p info will not be valid. */
- WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN,
-
- /**
- * The metadata resource for each image has successfully been writen to
- * the WIM. @p info will not be valid. */
- WIMLIB_PROGRESS_MSG_WRITE_METADATA_END,
-
- /**
- * The temporary file has successfully been renamed to the original WIM
- * file. Only happens when wimlib_overwrite() is called and the
- * overwrite is not done in-place.
- * @p info will point to ::wimlib_progress_info.rename. */
- WIMLIB_PROGRESS_MSG_RENAME,
-
- /** The contents of the WIM are being checked against the integrity
- * table. Only happens when wimlib_open_wim() is called with the
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY flag. @p info will point to
- * ::wimlib_progress_info.integrity. */
- WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY,
+ * @p info will point to ::wimlib_progress_info.write_streams. This
+ * message may be received many times while the WIM file is being
+ * written or appended to with wimlib_write(), wimlib_overwrite(), or
+ * wimlib_write_to_fd(). */
+ WIMLIB_PROGRESS_MSG_WRITE_STREAMS = 12,
+
+ /** Per-image metadata is about to be written to the WIM file. @p info
+ * will not be valid. */
+ WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN = 13,
+
+ /** Confirms that per-image metadata has been successfully been written
+ * to the WIM file. @p info will not be valid. This message is paired
+ * with a preceding ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN message.
+ */
+ WIMLIB_PROGRESS_MSG_WRITE_METADATA_END = 14,
+
+ /** wimlib_overwrite() has successfully renamed the temporary file to
+ * the original WIM file, thereby committing the update. @p info will
+ * point to ::wimlib_progress_info.rename. Note: this message is not
+ * received if wimlib_overwrite() chose to append to the WIM file
+ * in-place. */
+ WIMLIB_PROGRESS_MSG_RENAME = 15,
+
+ /** The contents of the WIM file are being checked against the integrity
+ * table. @p info will point to ::wimlib_progress_info.integrity. This
+ * message is only received (and may be received many times) when
+ * wimlib_open_wim_with_progress() is called with the
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY flag. */
+ WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY = 16,
/** An integrity table is being calculated for the WIM being written.
- * Only happens when wimlib_write() or wimlib_overwrite() is called with
- * the ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY flag. @p info will point to
- * ::wimlib_progress_info.integrity. */
- WIMLIB_PROGRESS_MSG_CALC_INTEGRITY,
-
- /** Reserved. */
- WIMLIB_PROGRESS_MSG_RESERVED,
+ * @p info will point to ::wimlib_progress_info.integrity. This message
+ * is only received (and may be received many times) when a WIM file is
+ * being written with the flag ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
+ WIMLIB_PROGRESS_MSG_CALC_INTEGRITY = 17,
/** A wimlib_split() operation is in progress, and a new split part is
* about to be started. @p info will point to
- * ::wimlib_progress_info.split. */
- WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART,
+ * ::wimlib_progress_info.split. */
+ WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART = 19,
/** A wimlib_split() operation is in progress, and a split part has been
- * finished. @p info will point to ::wimlib_progress_info.split. */
- WIMLIB_PROGRESS_MSG_SPLIT_END_PART,
-
- /**
- * A WIM update command is just about to be executed; @p info will point
- * to ::wimlib_progress_info.update.
+ * finished. @p info will point to ::wimlib_progress_info.split. */
+ WIMLIB_PROGRESS_MSG_SPLIT_END_PART = 20,
+
+ /** A WIM update command is just about to be executed. @p info will
+ * point to ::wimlib_progress_info.update. This message is received
+ * once per update command when wimlib_update_image() is called with the
+ * flag ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS. */
+ WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND = 21,
+
+ /** A WIM update command has just been executed. @p info will point to
+ * ::wimlib_progress_info.update. This message is received once per
+ * update command when wimlib_update_image() is called with the flag
+ * ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS. */
+ WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND = 22,
+
+ /** A file in the WIM image is being replaced as a result of a
+ * ::wimlib_add_command without ::WIMLIB_ADD_FLAG_NO_REPLACE specified.
+ * @p info will point to ::wimlib_progress_info.replace. This is only
+ * received when ::WIMLIB_ADD_FLAG_VERBOSE is also specified in the add
+ * command. */
+ WIMLIB_PROGRESS_MSG_REPLACE_FILE_IN_WIM = 23,
+
+ /** A WIM image is being applied with ::WIMLIB_EXTRACT_FLAG_WIMBOOT, and
+ * a file is being extracted normally (not as a WIMBoot "pointer file")
+ * due to it matching a pattern in the [PrepopulateList] section of the
+ * configuration file \Windows\System32\WimBootCompress.ini in the WIM
+ * image. @info will point to ::wimlib_progress_info.wimboot_exclude.
*/
- WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND,
+ WIMLIB_PROGRESS_MSG_WIMBOOT_EXCLUDE = 24,
+};
+
+/** Valid return values from user-provided progress functions
+ * (::wimlib_progress_func_t).
+ *
+ * (Note: if an invalid value is returned, ::WIMLIB_ERR_UNKNOWN_PROGRESS_STATUS
+ * will be issued.)
+ */
+enum wimlib_progress_status {
- /**
- * A WIM update command has just been executed; @p info will point to
- * ::wimlib_progress_info.update.
+ /** The operation should be continued. This is the normal return value.
*/
- WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND,
+ WIMLIB_PROGRESS_STATUS_CONTINUE = 0,
+ /** The operation should be aborted. This will cause the current
+ * operation to fail with ::WIMLIB_ERR_ABORTED_BY_PROGRESS. */
+ WIMLIB_PROGRESS_STATUS_ABORT = 1,
};
/** A pointer to this union is passed to the user-supplied
int32_t compression_type;
/** Number of split WIM parts from which streams are being
- * written (may be 0 if irrelevant). */
+ * written (may be 0 if irrelevant). */
uint32_t total_parts;
- /** Number of split WIM parts from which streams have been
- * written (may be 0 if irrelevant). */
+ /** This is currently broken and will always be 0. */
uint32_t completed_parts;
} write_streams;
* ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY, and
* ::WIMLIB_PROGRESS_MSG_SCAN_END. */
struct wimlib_progress_info_scan {
- /** Top-level directory being scanned; or, when capturing a NTFS
+ /** Top-level directory being scanned; or, when capturing an NTFS
* volume with ::WIMLIB_ADD_FLAG_NTFS, this is instead the path
* to the file or block device that contains the NTFS volume
* being scanned. */
const wimlib_tchar *source;
/** Path to the file (or directory) that has been scanned, valid
- * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing a NTFS
+ * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing an NTFS
* volume with ::WIMLIB_ADD_FLAG_NTFS, this path will be
* relative to the root of the NTFS volume. */
const wimlib_tchar *cur_path;
union {
/** Target path in the WIM image. Only valid on
* messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. If capturing a full
- * image, this will be the empty string; otherwise it
- * will name the place in the WIM image at which the
- * directory tree is being added. */
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
const wimlib_tchar *wim_target_path;
/** For ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY and a status
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END, and
- * ::WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS.
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END, and
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END.
*
* Note: most of the time of an extraction operation will be spent
* extracting streams, and the application will receive
* general, actually provide information about which "file" is currently
* being extracted. This is because wimlib, by default, extracts the
* individual data streams in whichever order it determines to be the
- * most efficient. */
+ * most efficient.
+ */
struct wimlib_progress_info_extract {
/** Number of the image from which files are being extracted
* (1-based). */
- int image;
+ uint32_t image;
/** Extraction flags being used. */
- int extract_flags;
+ uint32_t extract_flags;
/** Full path to the WIM file from which files are being
* extracted, or @c NULL if the WIMStruct has no associated
* data stream, or a reparse data buffer. */
uint64_t num_streams;
- /** When extracting files using wimlib_extract_files(), this
- * will be the path within the WIM image to the file or
- * directory tree currently being extracted. Otherwise, this
- * will be the empty string. */
- const wimlib_tchar *extract_root_wim_source_path;
+ /** Reserved. */
+ const wimlib_tchar *reserved_2;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
- unsigned part_number;
+ uint32_t part_number;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
- unsigned total_parts;
+ uint32_t total_parts;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
/** Name of the split WIM part that is about to be started
* (::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART) or has just been
- * finished (::WIMLIB_PROGRESS_MSG_SPLIT_END_PART). */
- const wimlib_tchar *part_name;
+ * finished (::WIMLIB_PROGRESS_MSG_SPLIT_END_PART).
+ * As of wimlib v1.7.0, the library user may change this when
+ * receiving ::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART in order to
+ * cause the next split WIM part to be written to a different
+ * location. */
+ wimlib_tchar *part_name;
} split;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_REPLACE_FILE_IN_WIM */
+ struct wimlib_progress_info_replace {
+ /** Path to the file in the WIM image that is being replaced */
+ const wimlib_tchar *path_in_wim;
+ } replace;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_WIMBOOT_EXCLUDE */
+ struct wimlib_progress_info_wimboot_exclude {
+ /** Path to the file in the WIM image */
+ const wimlib_tchar *path_in_wim;
+
+ /** Path to which the file is being extracted */
+ const wimlib_tchar *extraction_path;
+ } wimboot_exclude;
};
-/** A user-supplied function that will be called periodically during certain WIM
- * operations. The first argument will be the type of operation that is being
- * performed or is about to be started or has been completed. The second
- * argument will be a pointer to one of a number of structures depending on the
- * first argument. It may be @c NULL for some message types.
+/**
+ * A user-supplied function that will be called periodically during certain WIM
+ * operations.
+ *
+ * The first argument will be the type of operation that is being performed or
+ * is about to be started or has been completed.
+ *
+ * The second argument will be a pointer to one of a number of structures
+ * depending on the first argument. It may be @c NULL for some message types.
+ * Note that although this argument is not @c const, users should not modify it
+ * except in explicitly documented cases.
*
- * The return value of the progress function is currently ignored, but it may do
- * something in the future. (Set it to 0 for now.)
+ * The third argument will be a user-supplied value that was provided when
+ * registering or specifying the progress function.
+ *
+ * This function must return one of the ::wimlib_progress_status values. By
+ * default, you should return ::WIMLIB_PROGRESS_STATUS_CONTINUE (0).
*/
-typedef int (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
- const union wimlib_progress_info *info);
+typedef enum wimlib_progress_status
+ (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
+ union wimlib_progress_info *info,
+ void *progctx);
/** @} */
/** @ingroup G_modifying_wims
* filesystem to be included in the WIM image. */
wimlib_tchar *fs_source_path;
- /** Destination path in the WIM image. Leading and trailing slashes are
- * ignored. The empty string or @c NULL means the root directory of the
- * WIM image. */
+ /** Destination path in the WIM image. Use ::WIMLIB_WIM_ROOT_PATH to
+ * specify the root directory of the WIM image. */
wimlib_tchar *wim_target_path;
/** Reserved; set to 0. */
long reserved;
};
-/** Structure that specifies a list of path patterns. */
-struct wimlib_pattern_list {
- /** Array of patterns. The patterns may be modified by library code,
- * but the @p pats pointer itself will not. See the man page for
- * <b>wimlib-imagex capture</b> for more information about allowed
- * patterns. */
- wimlib_tchar **pats;
-
- /** Number of patterns in the @p pats array. */
- size_t num_pats;
-
- /** Ignored; may be used by the calling code. */
- size_t num_allocated_pats;
-};
-
-/** A structure that contains lists of wildcards that match paths to treat
- * specially when capturing a WIM image. */
-struct wimlib_capture_config {
- /** Paths matching any pattern this list are excluded from being
- * captured, except if the same path appears in @p
- * exclusion_exception_pats. */
- struct wimlib_pattern_list exclusion_pats;
-
- /** Paths matching any pattern in this list are never excluded from
- * being captured. */
- struct wimlib_pattern_list exclusion_exception_pats;
-
- /** Reserved for future capture configuration options. */
- struct wimlib_pattern_list reserved1;
-
- /** Reserved for future capture configuration options. */
- struct wimlib_pattern_list reserved2;
-
- /** Library internal use only. */
- wimlib_tchar *_prefix;
-
- /** Library internal use only. */
- size_t _prefix_num_tchars;
-};
-
/** Set or unset the WIM header flag that marks it read-only
* (WIM_HDR_FLAG_READONLY in Microsoft's documentation), based on the
* ::wimlib_wim_info.is_marked_readonly member of the @p info parameter. This
#define WIMLIB_REPARSE_TAG_DFS 0x8000000A
#define WIMLIB_REPARSE_TAG_DFSR 0x80000012
#define WIMLIB_REPARSE_TAG_FILTER_MANAGER 0x8000000B
+#define WIMLIB_REPARSE_TAG_WOF 0x80000017
#define WIMLIB_REPARSE_TAG_SYMLINK 0xA000000C
/** If the file is a reparse point (FILE_ATTRIBUTE_DIRECTORY set in the
* attributes), this will give the reparse tag. This tells you whether
/** Time this file was last accessed. */
struct timespec last_access_time;
- uint64_t reserved[16];
+
+ /* UNIX data (wimlib extension), only valid if unix_mode != 0 */
+ uint32_t unix_uid;
+ uint32_t unix_gid;
+ uint32_t unix_mode;
+ uint32_t unix_reserved;
+
+ uint64_t reserved[14];
/** Array of streams that make up this file. The first entry will
* always exist and will correspond to the unnamed data stream (default
/** @ingroup G_modifying_wims
* @{ */
-/** Directly capture a NTFS volume rather than a generic directory. This flag
+/** Directly capture an NTFS volume rather than a generic directory. This flag
* cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
* ::WIMLIB_ADD_FLAG_UNIX_DATA. */
#define WIMLIB_ADD_FLAG_NTFS 0x00000001
-/** Follow symlinks; archive and dump the files they point to. Cannot be used
- * with ::WIMLIB_ADD_FLAG_NTFS. */
+/** Follow symlinks; archive and dump the files they point to. Currently only
+ * supported on UNIX-like systems. */
#define WIMLIB_ADD_FLAG_DEREFERENCE 0x00000002
/** Call the progress function with the message
* scanned. */
#define WIMLIB_ADD_FLAG_VERBOSE 0x00000004
-/** Mark the image being added as the bootable image of the WIM. */
+/** Mark the image being added as the bootable image of the WIM. Not valid for
+ * wimlib_update_image(). */
#define WIMLIB_ADD_FLAG_BOOT 0x00000008
/** Store the UNIX owner, group, and mode. This is done by adding a special
* alternate data stream to each regular file, symbolic link, and directory to
* contain this information. Please note that this flag is for convenience
* only; Microsoft's implementation will not understand this special
- * information. This flag cannot be combined with ::WIMLIB_ADD_FLAG_NTFS. */
+ * information. */
#define WIMLIB_ADD_FLAG_UNIX_DATA 0x00000010
/** Do not capture security descriptors. Only has an effect in NTFS capture
#define WIMLIB_ADD_FLAG_NORPFIX 0x00000200
/** Do not automatically exclude unsupported files or directories from capture;
- * e.g. encrypted directories in NTFS-3g capture mode, or device files and FIFOs
- * on UNIX-like systems. Instead, fail with ::WIMLIB_ERR_UNSUPPORTED_FILE when
+ * e.g. encrypted files in NTFS-3g capture mode, or device files and FIFOs on
+ * UNIX-like systems. Instead, fail with ::WIMLIB_ERR_UNSUPPORTED_FILE when
* such a file is encountered. */
#define WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE 0x00000400
-/** Automatically select a capture configuration appropriate for capturing
- * filesystems containing Windows operating systems. When this flag is
- * specified, the corresponding @p config parameter or member must be @c NULL.
- *
- * Currently, selecting this capture configuration will cause the following
- * files and directories to be excluded from capture:
+/**
+ * Automatically select a capture configuration appropriate for capturing
+ * filesystems containing Windows operating systems. For example,
+ * "pagefile.sys" and "System Volume Information" will be excluded.
*
- * - "\$ntfs.log"
- * - "\hiberfil.sys"
- * - "\pagefile.sys"
- * - "\System Volume Information"
- * - "\RECYCLER"
- * - "\Windows\CSC"
+ * When this flag is specified, the corresponding @p config parameter or member
+ * must be @c NULL.
*
* Note that the default behavior--- that is, when this flag is not specified
* and @p config is @c NULL--- is to use no capture configuration, meaning that
*/
#define WIMLIB_ADD_FLAG_WINCONFIG 0x00000800
+/**
+ * Capture image as WIMBoot compatible. In addition, if no capture
+ * configuration file is explicitly specified use the capture configuration file
+ * <c>$SOURCE/Windows/System32/WimBootCompress.ini</c> if it exists, where
+ * <c>$SOURCE</c> is the directory being captured; or, if a capture
+ * configuration file is explicitly specified, use it and also place it at
+ * /Windows/System32/WimBootCompress.ini in the WIM image.
+ *
+ * Note: this will not by itself change the compression type. Before writing
+ * the WIM file, it's recommended to also do:
+ *
+ * \code
+ * wimlib_set_output_compression_type(wim, WIMLIB_COMPRESSION_TYPE_XPRESS);
+ * wimlib_set_output_chunk_size(wim, 4096);
+ * \endcode
+ *
+ * since that makes access to the data faster (at the cost of a worse
+ * compression ratio compared to the 32768-byte LZX chunks usually used).
+ */
+#define WIMLIB_ADD_FLAG_WIMBOOT 0x00001000
+
+/**
+ * If the add command involves adding a non-directory file to a location at
+ * which there already exists a nondirectory file in the WIM image, issue
+ * ::WIMLIB_ERR_INVALID_OVERLAY instead of replacing the file. This only has an
+ * effect when updating an existing image with wimlib_update_image().
+ * This was the default behavior in wimlib v1.6.2 and earlier.
+ */
+#define WIMLIB_ADD_FLAG_NO_REPLACE 0x00002000
+
#define WIMLIB_ADD_IMAGE_FLAG_NTFS WIMLIB_ADD_FLAG_NTFS
#define WIMLIB_ADD_IMAGE_FLAG_DEREFERENCE WIMLIB_ADD_FLAG_DEREFERENCE
#define WIMLIB_ADD_IMAGE_FLAG_VERBOSE WIMLIB_ADD_FLAG_VERBOSE
#define WIMLIB_ADD_IMAGE_FLAG_NO_UNSUPPORTED_EXCLUDE \
WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE
#define WIMLIB_ADD_IMAGE_FLAG_WINCONFIG WIMLIB_ADD_FLAG_WINCONFIG
+#define WIMLIB_ADD_IMAGE_FLAG_WIMBOOT WIMLIB_ADD_FLAG_WIMBOOT
+
/** @} */
/** @ingroup G_modifying_wims
/** Give the exported image(s) no descriptions. */
#define WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS 0x00000004
+/** This advises the library that the program is finished with the source
+ * WIMStruct and will not attempt to access it after the call to
+ * wimlib_export_image(), with the exception of the call to wimlib_free(). */
+#define WIMLIB_EXPORT_FLAG_GIFT 0x00000008
+
+/**
+ * Mark each exported image as WIMBoot-compatible.
+ *
+ * Note: by itself, this does change the destination WIM's compression type, nor
+ * does it add the file \Windows\System32\WimBootCompress.ini in the WIM image.
+ * Before writing the destination WIM, it's recommended to do something like:
+ *
+ * \code
+ * wimlib_set_output_compression_type(wim, WIMLIB_COMPRESSION_TYPE_XPRESS);
+ * wimlib_set_output_chunk_size(wim, 4096);
+ * wimlib_add_tree(wim, image, L"myconfig.ini",
+ * L"\\Windows\\System32\\WimBootCompress.ini", 0);
+ * \endcode
+ */
+#define WIMLIB_EXPORT_FLAG_WIMBOOT 0x00000010
+
/** @} */
/** @ingroup G_extracting_wims
* @{ */
-/** Extract the image directly to a NTFS volume rather than a generic directory.
+/** Extract the image directly to an NTFS volume rather than a generic directory.
* This mode is only available if wimlib was compiled with libntfs-3g support;
* if not, ::WIMLIB_ERR_UNSUPPORTED will be returned. In this mode, the
- * extraction target will be interpreted as the path to a NTFS volume image (as
+ * extraction target will be interpreted as the path to an NTFS volume image (as
* a regular file or block device) rather than a directory. It will be opened
* using libntfs-3g, and the image will be extracted to the NTFS filesystem's
* root directory. Note: this flag cannot be used when wimlib_extract_image()
- * is called with ::WIMLIB_ALL_IMAGES as the @p image. */
+ * is called with ::WIMLIB_ALL_IMAGES as the @p image, nor can it be used with
+ * wimlib_extract_paths() when passed multiple paths. */
#define WIMLIB_EXTRACT_FLAG_NTFS 0x00000001
-/** When identical files are extracted from the WIM, always hard link them
- * together. */
-#define WIMLIB_EXTRACT_FLAG_HARDLINK 0x00000002
-
-/** When identical files are extracted from the WIM, always symlink them
- * together. */
-#define WIMLIB_EXTRACT_FLAG_SYMLINK 0x00000004
-
-/** This flag no longer does anything but is reserved for future use. */
-#define WIMLIB_EXTRACT_FLAG_VERBOSE 0x00000008
-
-/** Read the WIM file sequentially while extracting the image. As of wimlib
- * v1.6.0 this is the default behavior, and this flag no longer does anything.
- */
-#define WIMLIB_EXTRACT_FLAG_SEQUENTIAL 0x00000010
-
-/** Extract special UNIX data captured with ::WIMLIB_ADD_FLAG_UNIX_DATA. Only
- * valid on UNIX-like platforms, and when ::WIMLIB_EXTRACT_FLAG_NTFS was not
- * specified. */
+/** UNIX-like systems only: Extract special UNIX data captured with
+ * ::WIMLIB_ADD_FLAG_UNIX_DATA. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS. */
#define WIMLIB_EXTRACT_FLAG_UNIX_DATA 0x00000020
-/** Do not extract security descriptors. */
+/** Do not extract security descriptors. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS. */
#define WIMLIB_EXTRACT_FLAG_NO_ACLS 0x00000040
/** Fail immediately if the full security descriptor of any file or directory
* cannot be set exactly as specified in the WIM file. On Windows, the default
- * behavior without this flag is to fall back to setting the security descriptor
- * with the SACL omitted, then only the default inherited security descriptor,
- * if we do not have permission to set the desired one. */
+ * behavior without this flag when wimlib does not have permission to set the
+ * correct security descriptor is to fall back to setting the security
+ * descriptor with the SACL omitted, then with the DACL omitted, then with the
+ * owner omitted, then not at all. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_NO_ACLS. */
#define WIMLIB_EXTRACT_FLAG_STRICT_ACLS 0x00000080
/** This is the extraction equivalent to ::WIMLIB_ADD_FLAG_RPFIX. This forces
* reparse-point fixups on, so absolute symbolic links or junction points will
- * be fixed to be absolute relative to the actual extraction root. Reparse
- * point fixups are done by default if WIM_HDR_FLAG_RP_FIX is set in the WIM
- * header. This flag may only be specified when extracting a full image (not a
- * file or directory tree within one). */
+ * be fixed to be absolute relative to the actual extraction root. Reparse-
+ * point fixups are done by default for wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe() if WIM_HDR_FLAG_RP_FIX is set in the WIM
+ * header. This flag cannot be combined with ::WIMLIB_EXTRACT_FLAG_NORPFIX. */
#define WIMLIB_EXTRACT_FLAG_RPFIX 0x00000100
/** Force reparse-point fixups on extraction off, regardless of the state of the
- * WIM_HDR_FLAG_RP_FIX flag in the WIM header. */
+ * WIM_HDR_FLAG_RP_FIX flag in the WIM header. This flag cannot be combined
+ * with ::WIMLIB_EXTRACT_FLAG_RPFIX. */
#define WIMLIB_EXTRACT_FLAG_NORPFIX 0x00000200
-/** Extract the specified file to standard output. This is only valid in an
- * extraction command that specifies the extraction of a regular file in the WIM
- * image. */
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Extract the
+ * paths, each of which must name a regular file, to standard output. */
#define WIMLIB_EXTRACT_FLAG_TO_STDOUT 0x00000400
/** Instead of ignoring files and directories with names that cannot be
/** Do not ignore failure to set short names on extracted files. */
#define WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES 0x00004000
-/** Do not ignore failure to extract symbolic links (and junction points, on
- * Windows) due to permissions problems. By default, such failures are ignored
- * since the default configuration of Windows only allows the Administrator to
- * create symbolic links. */
+/** On Windows, do not ignore failure to extract symbolic links and junctions
+ * due to permissions problems. By default, such failures are ignored since the
+ * default configuration of Windows only allows the Administrator to create
+ * symbolic links. */
#define WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS 0x00008000
/** TODO: this flag is intended to allow resuming an aborted extraction, but the
* behavior is currently less than satisfactory. Do not use (yet). */
#define WIMLIB_EXTRACT_FLAG_RESUME 0x00010000
-/** Perform the extraction ordered by the tree of files to extract rather than
- * how the underlying streams are arranged in the WIM file. For regular WIM
- * files this may decrease or increase performance, depending on various
- * factors. For WIM files containing packed streams this will decrease
- * performance. */
-#define WIMLIB_EXTRACT_FLAG_FILE_ORDER 0x00020000
-
/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Treat the
- * paths in the WIM as "glob" patterns which may contain the wildcard characters
- * '?' and '*'. The '?' character matches any character except a path
- * separator, whereas the '*' character matches zero or more non-path-separator
- * characters. Each glob pattern may match zero or more paths in the WIM file.
- * If a glob pattern ends in a path separator, it will only match directories
- * (including reparse points with FILE_ATTRIBUTE_DIRECTORY set). By default, if
- * a glob pattern does not match any files, a warning but not an error will be
- * issued, even if the glob pattern did not actually contain wildcard
- * characters. Use ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB to get an error instead.
- */
+ * paths to extract as wildcard patterns ("globs") which may contain the
+ * wildcard characters @c ? and @c *. The @c ? character matches any
+ * non-path-separator character, whereas the @c * character matches zero or more
+ * non-path-separator characters. Consequently, each glob may match zero or
+ * more actual paths in the WIM image. By default, if a glob does not match any
+ * files, a warning but not an error will be issued, even if the glob did not
+ * actually contain wildcard characters. Use ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB
+ * to get an error instead. */
#define WIMLIB_EXTRACT_FLAG_GLOB_PATHS 0x00040000
/** In combination with ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS, causes an error
* one of the provided globs did not match a file. */
#define WIMLIB_EXTRACT_FLAG_STRICT_GLOB 0x00080000
+/** Do not extract Windows file attributes such as readonly, hidden, etc. */
+#define WIMLIB_EXTRACT_FLAG_NO_ATTRIBUTES 0x00100000
+
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Do not
+ * preserve the directory structure of the archive when extracting --- that is,
+ * place each extracted file or directory tree directly in the target directory.
+ */
+#define WIMLIB_EXTRACT_FLAG_NO_PRESERVE_DIR_STRUCTURE 0x00200000
+
+/** Windows only: Extract files as "pointers" back to the WIM archive. See the
+ * documentation for the <b>--wimboot</b> option of <b>wimlib-imagex apply</b>
+ * for more information. */
+#define WIMLIB_EXTRACT_FLAG_WIMBOOT 0x00400000
+
/** @} */
/** @ingroup G_mounting_wim_images
* @{ */
/** Do a "lazy" unmount (detach filesystem immediately, even if busy). */
#define WIMLIB_UNMOUNT_FLAG_LAZY 0x00000010
+/** In combination with ::WIMLIB_UNMOUNT_FLAG_COMMIT for a read-write mounted
+ * image, causes the modified image to be committed as a new, unnamed image
+ * appended to the archive. The original image will be unmodified. */
+#define WIMLIB_UNMOUNT_FLAG_NEW_IMAGE 0x00000020
+
/** @} */
/** @ingroup G_modifying_wims
* @{ */
/** @ingroup G_writing_and_overwriting_wims
* @{ */
-/** Include an integrity table in the WIM.
+/**
+ * Include an integrity table in the resulting WIM file.
*
- * For WIMs created with wimlib_open_wim(), the default behavior is to include
- * an integrity table if and only if one was present before. For WIMs created
- * with wimlib_create_new_wim(), the default behavior is to not include an
- * integrity table. */
+ * For ::WIMStruct's created with wimlib_open_wim(), the default behavior is to
+ * include an integrity table if and only if one was present before. For
+ * ::WIMStruct's created with wimlib_create_new_wim(), the default behavior is
+ * to not include an integrity table.
+ */
#define WIMLIB_WRITE_FLAG_CHECK_INTEGRITY 0x00000001
-/** Do not include an integrity table in the new WIM file. This is the default
- * behavior, unless the WIM already included an integrity table. */
+/**
+ * Do not include an integrity table in the resulting WIM file. This is the
+ * default behavior, unless the ::WIMStruct was created by opening a WIM with an
+ * integrity table.
+ */
#define WIMLIB_WRITE_FLAG_NO_CHECK_INTEGRITY 0x00000002
-/** Write the WIM as "pipable". After writing a WIM with this flag specified,
+/**
+ * Write the WIM as "pipable". After writing a WIM with this flag specified,
* images from it can be applied directly from a pipe using
* wimlib_extract_image_from_pipe(). See the documentation for the --pipable
* flag of `wimlib-imagex capture' for more information. Beware: WIMs written
* with this flag will not be compatible with Microsoft's software.
*
- * For WIMs created with wimlib_open_wim(), the default behavior is to write the
- * WIM as pipable if and only if it was pipable before. For WIMs created with
- * wimlib_create_new_wim(), the default behavior is to write the WIM as
- * non-pipable. */
+ * For ::WIMStruct's created with wimlib_open_wim(), the default behavior is to
+ * write the WIM as pipable if and only if it was pipable before. For
+ * ::WIMStruct's created with wimlib_create_new_wim(), the default behavior is
+ * to write the WIM as non-pipable.
+ */
#define WIMLIB_WRITE_FLAG_PIPABLE 0x00000004
-/** Do not write the WIM as "pipable". This is the default behavior, unless the
- * WIM was pipable already. */
+/**
+ * Do not write the WIM as "pipable". This is the default behavior, unless the
+ * ::WIMStruct was created by opening a pipable WIM.
+ */
#define WIMLIB_WRITE_FLAG_NOT_PIPABLE 0x00000008
-/** Recompress all resources, even if they could otherwise be copied from a
- * different WIM with the same compression type (in the case of
- * wimlib_export_image() being called previously). This flag is also valid in
- * the @p wim_write_flags of wimlib_join(), in which case all resources included
- * in the joined WIM file will be recompressed. */
+/**
+ * When writing streams to the WIM file, recompress them, even if their data is
+ * already available in the desired compressed form (for example, in a WIM file
+ * from which an image has been exported using wimlib_export_image()).
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS can be used to recompress with a higher
+ * compression ratio for the same compression type and chunk size. wimlib's LZX
+ * compressor currently can be given different parameters in order to achieve
+ * different balances between compression ratio and time. In its default mode
+ * as of v1.5.3, it usually compresses slightly better than the competing
+ * Microsoft implementation.
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS can also be used in combination with
+ * ::WIMLIB_WRITE_FLAG_PACK_STREAMS to prevent any solid blocks from being
+ * re-used. (Otherwise, solid blocks are re-used somewhat more liberally than
+ * normal compressed blocks.)
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS does <b>not</b> cause recompression of streams
+ * that would not otherwise be written. For example, a call to
+ * wimlib_overwrite() with ::WIMLIB_WRITE_FLAG_RECOMPRESS will not, by itself,
+ * cause already-existing streams in the WIM file to be recompressed. To force
+ * the WIM file to be fully rebuilt and recompressed, combine
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS with ::WIMLIB_WRITE_FLAG_REBUILD.
+ */
#define WIMLIB_WRITE_FLAG_RECOMPRESS 0x00000010
-/** Call fsync() just before the WIM file is closed. */
+/**
+ * Immediately before closing the WIM file, sync its data to disk.
+ *
+ * wimlib_overwrite() will set this flag automatically if it decides to
+ * overwrite the WIM file via a temporary file instead of in-place.
+ */
#define WIMLIB_WRITE_FLAG_FSYNC 0x00000020
-/** wimlib_overwrite() only: Re-build the entire WIM file rather than appending
- * data to it if possible. */
+/**
+ * For wimlib_overwrite(), rebuild the entire WIM file, even if it otherwise
+ * could be updated merely be appending to it.
+ *
+ * When rebuilding the WIM file, stream reference counts will be recomputed, and
+ * any streams with 0 reference count (e.g. from deleted files or images) will
+ * not be included in the resulting WIM file.
+ *
+ * This flag can be combined with ::WIMLIB_WRITE_FLAG_RECOMPRESS to force all
+ * data to be recompressed. Otherwise, compressed data is re-used if possible.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_REBUILD 0x00000040
-/** wimlib_overwrite() only: Specifying this flag overrides the default
- * behavior of wimlib_overwrite() after one or more calls to
- * wimlib_delete_image(), which is to rebuild the entire WIM. With this flag,
- * only minimal changes to correctly remove the image from the WIM will be
- * taken. In particular, all streams will be left alone, even if they are no
- * longer referenced. This is probably not what you want, because almost no
- * space will be saved by deleting an image in this way. */
+/**
+ * For wimlib_overwrite(), override the default behavior after one or more calls
+ * to wimlib_delete_image(), which is to rebuild the entire WIM file. With this
+ * flag, only minimal changes to correctly remove the image from the WIM file
+ * will be taken. In particular, all streams will be retained, even if they are
+ * no longer referenced. This may not be what you want, because no space will
+ * be saved by deleting an image in this way.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_SOFT_DELETE 0x00000080
-/** wimlib_overwrite() only: Allow overwriting the WIM even if the readonly
- * flag is set in the WIM header. This can be used in combination with
- * wimlib_set_wim_info() with the ::WIMLIB_CHANGE_READONLY_FLAG flag to actually
- * set the readonly flag on the on-disk WIM file. */
+/**
+ * For wimlib_overwrite(), allow overwriting the WIM file even if the readonly
+ * flag (WIM_HDR_FLAG_READONLY) is set in the WIM header. This can be used
+ * following a call to wimlib_set_wim_info() with the
+ * ::WIMLIB_CHANGE_READONLY_FLAG flag to actually set the readonly flag on the
+ * on-disk WIM file.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_IGNORE_READONLY_FLAG 0x00000100
-/** Do not include non-metadata resources already present in other WIMs. This
- * flag can be used to write a "delta" WIM after resources from the WIM on which
- * the delta is to be based were referenced with
- * wimlib_reference_resource_files() or wimlib_reference_resources(). */
+/**
+ * Do not include streams already present in other WIMs. This flag can be used
+ * to write a "delta" WIM after resources from the WIM on which the delta is to
+ * be based were referenced with wimlib_reference_resource_files() or
+ * wimlib_reference_resources().
+ */
#define WIMLIB_WRITE_FLAG_SKIP_EXTERNAL_WIMS 0x00000200
-/** Asserts that for writes of all WIM images, all streams needed for the WIM
- * are already present (not in external resource WIMs) and their reference
- * counts are correct, so the code does not need to recalculate which streams
- * are referenced. This is for optimization purposes only, since with this flag
- * specified, the metadata resources may not need to be decompressed and parsed.
- *
- * This flag can be passed to wimlib_write() and wimlib_write_to_fd(), but is
- * already implied for wimlib_overwrite(). */
+/**
+ * Advises the library that for writes of all WIM images, all streams needed for
+ * the WIM are already present (not in external resource WIMs) and their
+ * reference counts are correct, so the code does not need to recalculate which
+ * streams are referenced. This is for optimization purposes only, since with
+ * this flag specified, the metadata resources may not need to be decompressed
+ * and parsed.
+ *
+ * wimlib_overwrite() will set this flag automatically.
+ */
#define WIMLIB_WRITE_FLAG_STREAMS_OK 0x00000400
-#define WIMLIB_WRITE_FLAG_RESERVED 0x00000800
+/**
+ * For wimlib_write(), retain the WIM's GUID instead of generating a new one.
+ *
+ * wimlib_overwrite() sets this by default, since the WIM remains, logically,
+ * the same file.
+ */
+#define WIMLIB_WRITE_FLAG_RETAIN_GUID 0x00000800
/**
* When writing streams in the resulting WIM file, pack multiple streams into a
- * single WIM resource instead of compressing them independently. This tends to
- * produce a better compression ratio at the cost of less random access.
- * However, WIMs created with this flag are only compatible with wimlib v1.6.0
- * or later and WIMGAPI Windows 8 or later, seemingly for Windows Setup only and
- * <b>not including ImageX and Dism</b>. WIMs created with this flag must use
- * version number 3584 in their header instead of 68864.
- *
- * If this flag is passed to wimlib_overwrite() and the WIM did not previously
- * contain packed streams, the WIM's version number will be changed to 3584 and
- * the new streams will be written packed. Use ::WIMLIB_WRITE_FLAG_REBUILD to
- * force the WIM to be fully rebuilt. */
+ * single compressed resource instead of compressing them independently. This
+ * is also known as creating a "solid archive". This tends to produce a better
+ * compression ratio at the cost of much slower random access.
+ *
+ * WIM files created with this flag are only compatible with wimlib v1.6.0 or
+ * later, WIMGAPI Windows 8 or later, and DISM Windows 8.1 or later. WIM files
+ * created with this flag use a different version number in their header (3584
+ * instead of 68864) and are also called "ESD files".
+ *
+ * If this flag is passed to wimlib_overwrite(), any new data streams will be
+ * written in solid mode. Use both ::WIMLIB_WRITE_FLAG_REBUILD and
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS to force the entire WIM file be rebuilt with
+ * all streams recompressed in solid mode.
+ *
+ * Currently, new solid blocks will, by default, be written using LZMS
+ * compression with 32 MiB (33554432 byte) chunks. Use
+ * wimlib_set_output_pack_compression_type() and/or
+ * wimlib_set_output_pack_chunk_size() to change this. This is independent of
+ * the WIM's main compression type and chunk size; you can have a WIM that
+ * nominally uses LZX compression and 32768 byte chunks but actually contains
+ * LZMS-compressed solid blocks, for example. However, if including solid
+ * blocks, I suggest that you set the WIM's main compression type to LZMS as
+ * well, either by creating the WIM with
+ * ::wimlib_create_new_wim(::WIMLIB_COMPRESSION_TYPE_LZMS, ...) or by calling
+ * ::wimlib_set_output_compression_type(..., ::WIMLIB_COMPRESSION_TYPE_LZMS).
+ *
+ * This flag will be set by default when writing or overwriting a WIM file that
+ * either already contains packed streams, or has had packed streams exported
+ * into it and the WIM's main compression type is LZMS.
+ */
#define WIMLIB_WRITE_FLAG_PACK_STREAMS 0x00001000
/** @} */
/** @ingroup G_nonstandalone_wims
* @{ */
-/** wimlib_reference_resource_files() only: Enable shell-style filename
- * globbing. */
+/** For wimlib_reference_resource_files(), enable shell-style filename globbing.
+ * Ignored by wimlib_reference_resources(). */
#define WIMLIB_REF_FLAG_GLOB_ENABLE 0x00000001
-/** wimlib_reference_resource_files() only: Issue an error
+/** For wimlib_reference_resource_files(), issue an error
* (::WIMLIB_ERR_GLOB_HAD_NO_MATCHES) if a glob did not match any files. The
* default behavior without this flag is to issue no error at that point, but
* then attempt to open the glob as a literal path, which of course will fail
* anyway if no file exists at that path. No effect if
- * ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. */
+ * ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. Ignored by
+ * wimlib_reference_resources(). */
#define WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH 0x00000002
/** @} */
/** Data for a ::WIMLIB_UPDATE_OP_ADD operation. */
struct wimlib_add_command {
- /** Filesystem path to the file or directory tree to
- * add. */
+ /** Filesystem path to the file or directory tree to add. */
wimlib_tchar *fs_source_path;
- /** Path, specified from the root of the WIM image, at
- * which to add the file or directory tree within the
- * WIM image. */
+
+ /** Destination path in the WIM image. Use ::WIMLIB_WIM_ROOT_PATH to
+ * specify the root directory of the WIM image. */
wimlib_tchar *wim_target_path;
- /** Configuration for excluded files. @c NULL means
- * exclude no files (use no configuration), unless
- * ::WIMLIB_ADD_FLAG_WINCONFIG is specified in @p
- * add_flags. */
- struct wimlib_capture_config *config;
+ /** Path to capture configuration file to use, or @c NULL for default.
+ */
+ wimlib_tchar *config_file;
/** Bitwise OR of WIMLIB_ADD_FLAG_* flags. */
int add_flags;
/** Data for a ::WIMLIB_UPDATE_OP_DELETE operation. */
struct wimlib_delete_command {
- /** Path, specified from the root of the WIM image, for
- * the file or directory tree within the WIM image to be
- * deleted. */
+
+ /** Path, specified from the root of the WIM image, for the file or
+ * directory tree within the WIM image to be deleted. */
wimlib_tchar *wim_path;
- /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
+
+ /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
int delete_flags;
};
/** Data for a ::WIMLIB_UPDATE_OP_RENAME operation. */
struct wimlib_rename_command {
- /** Path, specified from the root of the WIM image, for
- * the source file or directory tree within the WIM
- * image. */
+
+ /** Path, specified from the root of the WIM image, for the source file
+ * or directory tree within the WIM image. */
wimlib_tchar *wim_source_path;
- /** Path, specified from the root of the WIM image, for
- * the destination file or directory tree within the WIM
- * image. */
+
+ /** Path, specified from the root of the WIM image, for the destination
+ * file or directory tree within the WIM image. */
wimlib_tchar *wim_target_path;
- /** Reserved; set to 0. */
+
+ /** Reserved; set to 0. */
int rename_flags;
};
};
};
-/** @} */
-/** @ingroup G_extracting_wims
- * @{ */
-
-/** Specification of a file or directory tree to extract from a WIM image. Used
- * in calls to wimlib_extract_files(). */
-struct wimlib_extract_command {
- /** Path to file or directory tree within the WIM image to extract. It
- * must be provided as an absolute path from the root of the WIM image.
- * The path separators may be either forward slashes or backslashes. */
- wimlib_tchar *wim_source_path;
-
- /** Filesystem path to extract the file or directory tree to. */
- wimlib_tchar *fs_dest_path;
-
- /** Bitwise or of zero or more of the WIMLIB_EXTRACT_FLAG_* flags. */
- int extract_flags;
-};
-
-
/** @} */
/** @ingroup G_general
* @{ */
WIMLIB_ERR_WRITE,
WIMLIB_ERR_XML,
WIMLIB_ERR_WIM_IS_ENCRYPTED,
+ WIMLIB_ERR_WIMBOOT,
+ WIMLIB_ERR_ABORTED_BY_PROGRESS,
+ WIMLIB_ERR_UNKNOWN_PROGRESS_STATUS,
};
* Name to give the new image. If @c NULL or empty, the new image is given
* no name. If nonempty, it must specify a name that does not already
* exist in @p wim.
- * @param config
- * Capture configuration that specifies files, directories, or path globs
- * to exclude from being captured. If @c NULL, a dummy configuration where
- * no paths are treated specially is used.
+ * @param config_file
+ * Path to capture configuration file, or @c NULL. This file may specify,
+ * among other things, which files to exclude from capture. See the man
+ * page for <b>wimlib-imagex capture</b> (<b>--config</b> option) for
+ * details of the file format. If @c NULL, the default capture
+ * configuration shall be used. Ordinarily, the default capture
+ * configuration will result in no files being excluded from capture purely
+ * based on name; however, the ::WIMLIB_ADD_FLAG_WINCONFIG and
+ * ::WIMLIB_ADD_FLAG_WIMBOOT flags modify the default.
* @param add_flags
* Bitwise OR of flags prefixed with WIMLIB_ADD_FLAG.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. The progress messages that will be
- * received are ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_SCAN_END, and, if ::WIMLIB_ADD_FLAG_VERBOSE was
- * included in @p add_flags, also ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY.
*
* @return 0 on success; nonzero on error. On error, changes to @p wim are
* discarded so that it appears to be in the same state as when this function
* returned by wimlib_add_empty_image() may be returned, as well as any error
* codes returned by wimlib_update_image() other than ones documented as only
* being returned specifically by an update involving delete or rename commands.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and ::WIMLIB_PROGRESS_MSG_SCAN_END.
+ * In addition, if ::WIMLIB_ADD_FLAG_VERBOSE is specified in @p add_flags, it
+ * will receive ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY.
*/
extern int
wimlib_add_image(WIMStruct *wim,
const wimlib_tchar *source,
const wimlib_tchar *name,
- const struct wimlib_capture_config *config,
- int add_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *config_file,
+ int add_flags);
/**
* @ingroup G_modifying_wims
const struct wimlib_capture_source *sources,
size_t num_sources,
const wimlib_tchar *name,
- const struct wimlib_capture_config *config,
- int add_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *config_file,
+ int add_flags);
+
+/**
+ * @ingroup G_modifying_wims
+ *
+ * Add the file or directory tree at @p fs_source_path on the filesystem to the
+ * location @p wim_target_path within the specified @p image of the @p wim.
+ *
+ * This just builds an appropriate ::wimlib_add_command and passes it to
+ * wimlib_update_image().
+ */
+extern int
+wimlib_add_tree(WIMStruct *wim, int image,
+ const wimlib_tchar *fs_source_path,
+ const wimlib_tchar *wim_target_path, int add_flags);
/**
* @ingroup G_creating_and_opening_wims
extern int
wimlib_delete_image(WIMStruct *wim, int image);
+/**
+ * @ingroup G_modifying_wims
+ *
+ * Delete the @p path from the specified @p image of the @p wim.
+ *
+ * This just builds an appropriate ::wimlib_delete_command and passes it to
+ * wimlib_update_image().
+ */
+extern int
+wimlib_delete_path(WIMStruct *wim, int image,
+ const wimlib_tchar *path, int delete_flags);
+
/**
* @ingroup G_modifying_wims
*
* parameter is overridden by ::WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS.
* @param export_flags
* Bitwise OR of flags prefixed with WIMLIB_EXPORT_FLAG.
- * @param progress_func
- * Currently ignored, but reserved for a function that will be called with
- * information about the operation. Use NULL if no additional information
- * is desired.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
WIMStruct *dest_wim,
const wimlib_tchar *dest_name,
const wimlib_tchar *dest_description,
- int export_flags,
- wimlib_progress_func_t progress_func);
+ int export_flags);
/**
* @ingroup G_extracting_wims
*
- * Extract zero or more files or directory trees from a WIM image.
- *
- * This generalizes the single-image extraction functionality of
- * wimlib_extract_image() to allow extracting only the specified subsets of the
+ * Extracts an image, or all images, from a WIM to a directory or NTFS volume
* image.
*
- * @param wim
- * The WIM from which to extract the files, specified as a pointer to the
- * ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1 of a
- * split WIM. In the case of a WIM file that is not standalone, this
- * ::WIMStruct must have had any needed external resources previously
- * referenced using wimlib_reference_resources() or
- * wimlib_reference_resource_files().
- *
- * @param image
- * The 1-based number of the image in @p wim from which the files or
- * directory trees are to be extracted. It cannot be ::WIMLIB_ALL_IMAGES.
- *
- * @param cmds
- * An array of ::wimlib_extract_command structures that specifies the
- * extractions to perform.
- *
- * @param num_cmds
- * Number of commands in the @p cmds array.
- *
- * @param default_extract_flags
- * Default extraction flags; the behavior shall be as if these flags had
- * been specified in the ::wimlib_extract_command.extract_flags member in
- * each extraction command, in combination with any flags already present.
- *
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
- *
- * @return 0 on success; nonzero on error. The possible error codes include
- * most of those documented as returned by wimlib_extract_image() as well as the
- * following additional error codes:
- *
- * @retval ::WIMLIB_ERR_INVALID_IMAGE
- * @p image was ::WIMLIB_ALL_IMAGES (or was not otherwise a valid image in
- * the WIM file).
- * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
- * The ::wimlib_extract_command.wim_source_path member in one of the
- * extract commands did not exist in the WIM.
- * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
- * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified for an extraction command
- * in which ::wimlib_extract_command.wim_source_path existed but was not a
- * regular file or directory.
- * @retval ::WIMLIB_ERR_INVALID_PARAM
- * ::WIMLIB_EXTRACT_FLAG_HARDLINK or ::WIMLIB_EXTRACT_FLAG_SYMLINK was
- * specified for some commands but not all; or
- * ::wimlib_extract_command.fs_dest_path was @c NULL or the empty string
- * for one or more commands; or ::WIMLIB_EXTRACT_FLAG_RPFIX was specified
- * for a command in which ::wimlib_extract_command.wim_source_path did not
- * specify the root directory of the WIM image.
- */
-extern int
-wimlib_extract_files(WIMStruct *wim,
- int image,
- const struct wimlib_extract_command *cmds,
- size_t num_cmds,
- int default_extract_flags,
- wimlib_progress_func_t progress_func);
-
-/**
- * @ingroup G_extracting_wims
- *
- * Extracts an image, or all images, from a WIM to a directory or directly to a
- * NTFS volume image.
- *
* The exact behavior of how wimlib extracts files from a WIM image is
* controllable by the @p extract_flags parameter, but there also are
* differences depending on the platform (UNIX-like vs Windows). See the manual
* special "NTFS volume extraction mode" entered by providing
* ::WIMLIB_EXTRACT_FLAG_NTFS.
*
- * All extracted data is SHA1-summed, and ::WIMLIB_ERR_INVALID_RESOURCE_HASH is
- * returned if any resulting SHA1 message digests do not match the values
- * provided in the WIM file. Therefore, if this function is successful, you can
- * be fairly sure that any compressed data in the WIM was uncompressed
- * correctly.
- *
* @param wim
* The WIM from which to extract the image(s), specified as a pointer to
* the ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1
* referenced using wimlib_reference_resources() or
* wimlib_reference_resource_files().
* @param image
- * The image to extract. Can be the number of an image, or ::WIMLIB_ALL_IMAGES
- * to specify that all images are to be extracted. ::WIMLIB_ALL_IMAGES cannot
- * be used if ::WIMLIB_EXTRACT_FLAG_NTFS is specified in @p extract_flags.
+ * The image to extract, specified as either the 1-based index of a single
+ * image to extract, or ::WIMLIB_ALL_IMAGES to specify that all images are
+ * to be extracted. ::WIMLIB_ALL_IMAGES cannot be used if
+ * ::WIMLIB_EXTRACT_FLAG_NTFS is specified in @p extract_flags.
* @param target
- * Directory to extract the WIM image(s) to (created if it does not already
- * exist); or, with ::WIMLIB_EXTRACT_FLAG_NTFS in @p extract_flags, the
- * path to the unmounted NTFS volume to extract the image to.
+ * Directory to extract the WIM image(s) to; or, with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS specified in @p extract_flags, the path to
+ * the unmounted NTFS volume to which to extract the image.
* @param extract_flags
- * Bitwise OR of the flags prefixed with WIMLIB_EXTRACT_FLAG.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
+ * Bitwise OR of flags prefixed with WIMLIB_EXTRACT_FLAG.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_DECOMPRESSION
- * Failed to decompress a resource to be extracted.
+ * Failed to decompress data contained in the WIM.
+ * @retval ::WIMLIB_ERR_INVALID_METADATA_RESOURCE
+ * The metadata for one of the images to extract was invalid.
* @retval ::WIMLIB_ERR_INVALID_PARAM
- * Both ::WIMLIB_EXTRACT_FLAG_HARDLINK and ::WIMLIB_EXTRACT_FLAG_SYMLINK
- * were specified in @p extract_flags; or both
- * ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS and ::WIMLIB_EXTRACT_FLAG_NO_ACLS were
- * specified in @p extract_flags; or both ::WIMLIB_EXTRACT_FLAG_RPFIX and
- * ::WIMLIB_EXTRACT_FLAG_NORPFIX were specified in @p extract_flags; or
- * ::WIMLIB_EXTRACT_FLAG_RESUME was specified in @p extract_flags; or if
- * ::WIMLIB_EXTRACT_FLAG_NTFS was specified in @p extract_flags and
- * @p image was ::WIMLIB_ALL_IMAGES.
+ * The extraction flags were invalid; more details may be found in the
+ * documentation for the specific extraction flags that were specified. Or
+ * @p target was @c NULL or the empty string, or @p wim was @c NULL.
* @retval ::WIMLIB_ERR_INVALID_RESOURCE_HASH
- * The SHA1 message digest of an extracted stream did not match the SHA1
- * message digest given in the WIM file.
+ * The SHA1 message digest of an extracted stream did not match the SHA1
+ * message digest given in the WIM.
* @retval ::WIMLIB_ERR_LINK
- * Failed to create a symbolic link or a hard link.
+ * Failed to create a symbolic link or a hard link.
+ * @retval ::WIMLIB_ERR_METADATA_NOT_FOUND
+ * The metadata resource for one of the images to extract was not found.
+ * This can happen if @p wim represents a non-first part of a split WIM.
* @retval ::WIMLIB_ERR_MKDIR
- * Failed create a directory.
+ * Failed create a directory.
* @retval ::WIMLIB_ERR_NOMEM
- * Failed to allocate needed memory.
+ * Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_OPEN
- * Could not create a file, or failed to open an already-extracted file.
+ * Could not create a file, or failed to open an already-extracted file.
* @retval ::WIMLIB_ERR_READ
- * Failed to read data from the WIM file associated with @p wim.
+ * Failed to read data from the WIM.
* @retval ::WIMLIB_ERR_READLINK
* Failed to determine the target of a symbolic link in the WIM.
* @retval ::WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED
* Failed to fix the target of an absolute symbolic link (e.g. if the
- * target would have exceeded the maximum allowed length). (Only if
- * reparse data was supported by the extraction mode and
- * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS was specified in @p extract_flags.)
+ * target would have exceeded the maximum allowed length). (Only if
+ * reparse data was supported by the extraction mode and
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS was specified in @p
+ * extract_flags.)
* @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
* One of the files or directories that needed to be extracted referenced a
* stream not present in the WIM's lookup table (or in any of the lookup
* Failed to set timestamps on a file (only if
* ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS was specified in @p extract_flags).
* @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
- * Unexpected end-of-file occurred when reading data from the WIM file
- * associated with @p wim.
+ * Unexpected end-of-file occurred when reading data from the WIM.
* @retval ::WIMLIB_ERR_UNSUPPORTED
* A requested extraction flag, or the data or metadata that must be
* extracted to support it, is unsupported in the build and configuration
* volume. Flags affected by this include ::WIMLIB_EXTRACT_FLAG_NTFS,
* ::WIMLIB_EXTRACT_FLAG_UNIX_DATA, ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS,
* ::WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES,
- * ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS,
- * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS, ::WIMLIB_EXTRACT_FLAG_SYMLINK,
- * and ::WIMLIB_EXTRACT_FLAG_HARDLINK. For example, if
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS, and
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS. For example, if
* ::WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES is specified in @p
- * extract_flags,
- * ::WIMLIB_ERR_UNSUPPORTED will be returned if the WIM image contains one
- * or more files with short names, but extracting short names is not
- * supported --- on Windows, this occurs if the target volume does not
- * support short names, while on non-Windows, this occurs if
+ * extract_flags, ::WIMLIB_ERR_UNSUPPORTED will be returned if the WIM
+ * image contains one or more files with short names, but extracting short
+ * names is not supported --- on Windows, this occurs if the target volume
+ * does not support short names, while on non-Windows, this occurs if
* ::WIMLIB_EXTRACT_FLAG_NTFS was not specified in @p extract_flags.
+ * @retval ::WIMLIB_ERR_WIMBOOT
+ * ::WIMLIB_EXTRACT_FLAG_WIMBOOT was specified in @p extract_flags, but
+ * there was a problem creating WIMBoot pointer files.
* @retval ::WIMLIB_ERR_WRITE
* Failed to write data to a file being extracted.
*
- * This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
- * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
- * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
- * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
- * different reasons) to read the metadata resource for an image that needed to
- * be extracted.
+ * If a progress function is registered with @p wim, then as each image is
+ * extracted it will receive ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN, then
+ * zero or more ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS messages, then
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END.
*/
extern int
wimlib_extract_image(WIMStruct *wim, int image,
- const wimlib_tchar *target,
- int extract_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *target, int extract_flags);
/**
* @ingroup G_extracting_wims
*
- * Since wimlib v1.5.0: Extract one or more images from a pipe on which a
- * pipable WIM is being sent.
+ * Since wimlib v1.5.0: Extract one image from a pipe on which a pipable WIM is
+ * being sent.
*
* See the documentation for ::WIMLIB_WRITE_FLAG_PIPABLE for more information
* about pipable WIMs.
* @param target
* Same as the corresponding parameter to wimlib_extract_image().
* @param extract_flags
- * Same as the corresponding parameter to wimlib_extract_image(), except
- * for the following exceptions: ::WIMLIB_EXTRACT_FLAG_SEQUENTIAL is
- * always implied, since data is always read from @p pipe_fd sequentially
- * in this mode; also, ::WIMLIB_EXTRACT_FLAG_TO_STDOUT is invalid and will
- * result in ::WIMLIB_ERR_INVALID_PARAM being returned.
- * @param progress_func
- * Same as the corresponding parameter to wimlib_extract_image(), except
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN messages will also be
- * received.
+ * Same as the corresponding parameter to wimlib_extract_image().
*
* @return 0 on success; nonzero on error. The possible error codes include
- * those returned by wimlib_extract_image() as well as the following:
+ * those returned by wimlib_extract_image() and wimlib_open_wim() as well as the
+ * following:
*
* @retval ::WIMLIB_ERR_INVALID_PIPABLE_WIM
* Data read from the pipable WIM was invalid.
extern int
wimlib_extract_image_from_pipe(int pipe_fd,
const wimlib_tchar *image_num_or_name,
- const wimlib_tchar *target, int extract_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *target, int extract_flags);
+
+/*
+ * @ingroup G_extracting_wims
+ *
+ * Same as wimlib_extract_image_from_pipe(), but allows specifying a progress
+ * function. The progress function will be used while extracting the WIM image
+ * and will receive the normal extraction progress messages, such as
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS, in addition to
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN.
+ */
+extern int
+wimlib_extract_image_from_pipe_with_progress(int pipe_fd,
+ const wimlib_tchar *image_num_or_name,
+ const wimlib_tchar *target,
+ int extract_flags,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
* @ingroup G_extracting_wims
* Leading and trailing whitespace, and otherwise empty lines and lines
* beginning with the ';' character are ignored. No quotes are needed as paths
* are otherwise delimited by the newline character.
+ *
+ * The error codes are the same as those returned by wimlib_extract_paths(),
+ * except that wimlib_extract_pathlist() returns an appropriate error code if it
+ * cannot read the path list file (::WIMLIB_ERR_OPEN, ::WIMLIB_ERR_STAT,
+ * ::WIMLIB_ERR_READ, ::WIMLIB_ERR_NOMEM, or ::WIMLIB_ERR_INVALID_UTF8_STRING).
*/
extern int
wimlib_extract_pathlist(WIMStruct *wim, int image,
const wimlib_tchar *target,
const wimlib_tchar *path_list_file,
- int extract_flags,
- wimlib_progress_func_t progress_func);
+ int extract_flags);
/**
* @ingroup G_extracting_wims
*
- * Since wimlib v1.6.0: Similar to wimlib_extract_files(), but the files or
- * directories to extract from the WIM image are specified as an array of paths.
- *
- * Each path will be extracted to a corresponding subdirectory of the @p target
- * based on its location in the WIM image. For example, if one of the paths to
- * extract is "/Windows/explorer.exe" and the target is "outdir", the file will
- * be extracted to "outdir/Windows/explorer.exe". Each path to extract must be
- * specified as the absolute path to a directory within the WIM image.
- * Separators in the paths to extract may be either forwards or backwards
- * slashes, and leading path separators are optional. Symbolic links are not
- * dereferenced when interpreting paths to extract. Paths to extract will be
- * interpreted either case-sensitively (UNIX default) or case-insensitively
- * (Windows default); this can be changed by wimlib_global_init().
- *
- * The @p target path, on the other hand, is expected to be a native path. On
- * UNIX-like systems it may not contain backslashes, for example.
- *
- * By default, if any paths to extract do not exist,
- * ::WIMLIB_ERR_PATH_DOES_NOT_EXIST is issued. This behavior changes if
- * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS is specified.
- *
- * With ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS specified in @p extract_flags, this
- * function additionally allows paths to be globs using the wildcard characters
- * '*' and '?'.
+ * Since wimlib v1.6.0: Extract zero or more paths (files or directory trees)
+ * from the specified WIM image.
+ *
+ * By default, each path will be extracted to a corresponding subdirectory of
+ * the target based on its location in the WIM image. For example, if one of
+ * the paths to extract is "/Windows/explorer.exe" and the target is "outdir",
+ * the file will be extracted to "outdir/Windows/explorer.exe". This behavior
+ * can be changed by providing the flag
+ * ::WIMLIB_EXTRACT_FLAG_NO_PRESERVE_DIR_STRUCTURE, which will cause each file
+ * or directory tree to be placed directly in the target directory --- so the
+ * same example would extract "/Windows/explorer.exe" to "outdir/explorer.exe".
+ *
+ * Symbolic links will not be dereferenced when paths in the WIM image are
+ * interpreted.
+ *
+ * @param wim
+ * WIM from which to extract the paths, specified as a pointer to the
+ * ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1 of a
+ * split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
+ * @param image
+ * 1-based index of the WIM image from which to extract the paths.
+ * @param paths
+ * Array of paths to extract. Each element must be the absolute path to a
+ * file or directory within the WIM image. Separators may be either
+ * forwards or backwards slashes, and leading path separators are optional.
+ * The paths will be interpreted either case-sensitively (UNIX default) or
+ * case-insensitively (Windows default); this can be changed by
+ * wimlib_global_init().
+ * <br/>
+ * By default, the characters @c * and @c ? are interpreted literally.
+ * This can be changed by specifying ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS in @p
+ * extract_flags.
+ * <br/>
+ * By default, if any paths to extract do not exist, the error code
+ * ::WIMLIB_ERR_PATH_DOES_NOT_EXIST is returned. This behavior changes if
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS is specified in @p extract_flags.
+ * @param num_paths
+ * Number of paths specified in @p paths.
+ * @param target
+ * Directory to which to extract the paths; or with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS specified in @p extract_flags, the path to an
+ * unmounted NTFS volume to which to extract the paths. Unlike the @p
+ * paths being extracted, the @p target must be native path. On UNIX-like
+ * systems it may not contain backslashes, for example.
+ * @param extract_flags
+ * Bitwise OR of flags prefixed with WIMLIB_EXTRACT_FLAG.
+ *
+ * @return 0 on success; nonzero on error. Most of the error codes are the same
+ * as those returned by wimlib_extract_image(). Below, some of the error codes
+ * returned in situations specific to path-mode extraction are documented:
+ *
+ * @retval ::WIMLIB_ERR_INVALID_IMAGE
+ * @p image was ::WIMLIB_ALL_IMAGES or was otherwise not a valid single
+ * image in the WIM.
+ * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
+ * One of the paths to extract did not exist in the WIM image. This error
+ * code can only be returned if ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS was not
+ * specified in @p extract_flags, or if both
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS and ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB
+ * were specified in @p extract_flags.
+ * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
+ * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified in @p extract_flags, but
+ * one of the paths to extract did not name a regular file.
+ *
+ * If a progress function is registered with @p wim, it will receive
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS. Note that because the extraction code
+ * is stream-based and not file-based, there is no way to get information about
+ * which path is currently being extracted, but based on byte count you can
+ * still calculate an approximate percentage complete for the extraction overall
+ * which may be all you really need anyway.
*/
extern int
wimlib_extract_paths(WIMStruct *wim,
const wimlib_tchar *target,
const wimlib_tchar * const *paths,
size_t num_paths,
- int extract_flags,
- wimlib_progress_func_t progress_func);
+ int extract_flags);
/**
* @ingroup G_wim_information
extern const wimlib_tchar *
wimlib_get_image_name(const WIMStruct *wim, int image);
+/**
+ * @ingroup G_general
+ *
+ * Returns the version of wimlib as a 32-bit number whose top 12 bits contain
+ * the major version, the next 10 bits contain the minor version, and the low 10
+ * bits contain the patch version.
+ *
+ * In other words, the returned value is equal to <code>((WIMLIB_MAJOR_VERSION
+ * << 22) | (WIMLIB_MINOR_VERSION << 10) | WIMLIB_PATCH_VERSION)</code> for the
+ * corresponding header file.
+ */
+extern uint32_t
+wimlib_get_version(void);
/**
* @ingroup G_wim_information
* be used to write the joined WIM.
* @param output_path
* The path to write the joined WIM file to.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
*
* @return 0 on success; nonzero on error. This function may return most error
* codes that can be returned by wimlib_open_wim() and wimlib_write(), as well
unsigned num_swms,
const wimlib_tchar *output_path,
int swm_open_flags,
- int wim_write_flags,
- wimlib_progress_func_t progress_func);
+ int wim_write_flags);
+
+/**
+ * @ingroup G_nonstandalone_wims
+ *
+ * Same as wimlib_join(), but allows specifying a progress function. The
+ * progress function will receive the write progress messages, such as
+ * ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS, while writing the joined WIM. In
+ * addition, if ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY is specified in @p
+ * swm_open_flags, the progress function will receive a series of
+ * ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY messages when each of the split WIM
+ * parts is opened.
+ */
+extern int
+wimlib_join_with_progress(const wimlib_tchar * const *swms,
+ unsigned num_swms,
+ const wimlib_tchar *output_path,
+ int swm_open_flags,
+ int wim_write_flags,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
* @param dir
* The path to an existing empty directory to mount the image on.
* @param mount_flags
- * Bitwise OR of the flags prefixed with WIMLIB_MOUNT_FLAG.
+ * Bitwise OR of flags prefixed with WIMLIB_MOUNT_FLAG.
* @param staging_dir
* If non-NULL, the name of a directory in which the staging directory will
* be created. Ignored if ::WIMLIB_MOUNT_FLAG_READWRITE is not specified
* @return 0 on success; nonzero on error.
*
* @retval ::WIMLIB_ERR_ALREADY_LOCKED
- * A read-write mount was requested, but an an exclusive advisory lock on
+ * A read-write mount was requested, but an exclusive advisory lock on
* the on-disk WIM file could not be acquired because another thread or
* process has mounted an image from the WIM read-write or is currently
* modifying the WIM in-place.
* @param open_flags
* Bitwise OR of flags prefixed with WIMLIB_OPEN_FLAG.
*
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. Currently, the only messages sent
- * will be ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY, and only if
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @p open_flags.
- *
* @param wim_ret
* On success, a pointer to an opaque ::WIMStruct for the opened WIM file
* is written to the memory location pointed to by this parameter. The
* Unexpected end-of-file while reading data from @p wim_file.
* @retval ::WIMLIB_ERR_UNKNOWN_VERSION
* The WIM version number was not recognized. (May be a pre-Vista WIM.)
+ * @retval ::WIMLIB_ERR_WIM_IS_ENCRYPTED
+ * The WIM cannot be opened because it contains encrypted segments. (It
+ * may be a Windows 8 "ESD" file).
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
* ::WIMLIB_OPEN_FLAG_WRITE_ACCESS was specified but the WIM file was
* considered read-only because of any of the reasons mentioned in the
extern int
wimlib_open_wim(const wimlib_tchar *wim_file,
int open_flags,
- WIMStruct **wim_ret,
- wimlib_progress_func_t progress_func);
+ WIMStruct **wim_ret);
+
+/**
+ * @ingroup G_creating_and_opening_wims
+ *
+ * Same as wimlib_open_wim(), but allows specifying a progress function and
+ * progress context. If successful, the progress function will be registered in
+ * the newly open ::WIMStruct. In addition, if
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY is specified in @p open_flags, the
+ * progress function will receive ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY
+ * messages while checking the WIM's integrity.
+ */
+extern int
+wimlib_open_wim_with_progress(const wimlib_tchar *wim_file,
+ int open_flags,
+ WIMStruct **wim_ret,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
* @ingroup G_writing_and_overwriting_wims
* Bitwise OR of relevant flags prefixed with WIMLIB_WRITE_FLAG.
* @param num_threads
* Number of threads to use for compression (see wimlib_write()).
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
*
* @return 0 on success; nonzero on error. This function may return most error
* codes returned by wimlib_write() as well as the following error codes:
* The WIM file is considered read-only because of any of the reasons
* mentioned in the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS
* flag.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN, and
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_END.
*/
extern int
-wimlib_overwrite(WIMStruct *wim, int write_flags, unsigned num_threads,
- wimlib_progress_func_t progress_func);
+wimlib_overwrite(WIMStruct *wim, int write_flags, unsigned num_threads);
/**
* @ingroup G_wim_information
extern void
wimlib_print_header(const WIMStruct *wim) _wimlib_deprecated;
-/**
- * @ingroup G_wim_information
- *
- * Deprecated in favor of wimlib_iterate_dir_tree(), which provides the
- * information in a way that can be accessed programatically.
- */
-extern int
-wimlib_print_metadata(WIMStruct *wim, int image) _wimlib_deprecated;
-
/**
* @ingroup G_nonstandalone_wims
*
* @param open_flags
* Additional open flags, such as ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY, to
* pass to internal calls to wimlib_open_wim() on the reference files.
- * @param progress_func
- * Passed to internal calls to wimlib_open_wim() on the reference files.
*
* @return 0 on success; nonzero on error.
*
const wimlib_tchar * const *resource_wimfiles_or_globs,
unsigned count,
int ref_flags,
- int open_flags,
- wimlib_progress_func_t progress_func);
+ int open_flags);
/**
* @ingroup G_nonstandalone_wims
* of the directory tree being captured.
* @param flags
* Reserved; must be 0.
- * @param progress_func
- * Currently ignored, but reserved for a function that will be called with
- * information about the operation. Use NULL if no additional information
- * is desired.
*
* @return 0 on success; nonzero on error.
*
extern int
wimlib_reference_template_image(WIMStruct *wim, int new_image,
WIMStruct *template_wim, int template_image,
- int flags, wimlib_progress_func_t progress_func);
+ int flags);
+
+/**
+ * @ingroup G_general
+ *
+ * Registers a progress function with a ::WIMStruct.
+ *
+ * @param wim
+ * The ::WIMStruct for which to register the progress function.
+ * @param progfunc
+ * Pointer to the progress function to register. If the WIM already has a
+ * progress function registered, it will be replaced with this one. If @p
+ * NULL, the current progress function (if any) will be unregistered.
+ * @param progctx
+ * The value which will be passed as the third argument to calls to @p
+ * progfunc.
+ */
+extern void
+wimlib_register_progress_function(WIMStruct *wim,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
+
+/**
+ * @ingroup G_modifying_wims
+ *
+ * Rename the @p source_path to the @p dest_path in the specified @p image of
+ * the @p wim.
+ *
+ * This just builds an appropriate ::wimlib_rename_command and passes it to
+ * wimlib_update_image().
+ */
+extern int
+wimlib_rename_path(WIMStruct *wim, int image,
+ const wimlib_tchar *source_path, const wimlib_tchar *dest_path);
/**
* @ingroup G_wim_information
* @ingroup G_writing_and_overwriting_wims
*
* Similar to wimlib_set_output_chunk_size(), but set the chunk size for writing
- * packed streams. For compatibility reasons, using this function is not
- * generally recommended.
+ * packed streams (solid blocks).
*/
extern int
wimlib_set_output_pack_chunk_size(WIMStruct *wim, uint32_t chunk_size);
* @ingroup G_writing_and_overwriting_wims
*
* Similar to wimlib_set_output_compression_type(), but set the compression type
- * for writing packed streams.
+ * for writing packed streams (solid blocks).
*/
extern int
wimlib_set_output_pack_compression_type(WIMStruct *wim, int ctype);
* Bitwise OR of relevant flags prefixed with @c WIMLIB_WRITE_FLAG. These
* flags will be used to write each split WIM part. Specify 0 here to get
* the default behavior.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation
- * (::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART and
- * ::WIMLIB_PROGRESS_MSG_SPLIT_END_PART).
*
* @return 0 on success; nonzero on error. This function may return most error
* codes that can be returned by wimlib_write() as well as the following error
* when they are copied from the joined WIM to the split WIM parts, nor are
* compressed resources re-compressed (unless explicitly requested with
* ::WIMLIB_WRITE_FLAG_RECOMPRESS).
+ *
+ * If a progress function is registered with @p wim, for each split WIM part
+ * that is written it will receive the messages
+ * ::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART and
+ * ::WIMLIB_PROGRESS_MSG_SPLIT_END_PART.
*/
extern int
wimlib_split(WIMStruct *wim,
const wimlib_tchar *swm_name,
uint64_t part_size,
- int write_flags,
- wimlib_progress_func_t progress_func);
+ int write_flags);
/**
* @ingroup G_mounting_wim_images
* ::WIMLIB_UNMOUNT_FLAG_COMMIT, ::WIMLIB_UNMOUNT_FLAG_REBUILD, and/or
* ::WIMLIB_UNMOUNT_FLAG_RECOMPRESS. None of these flags affect read-only
* mounts.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. Currently, only
- * ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS will be sent.
*
* @return 0 on success; nonzero on error.
*
*/
extern int
wimlib_unmount_image(const wimlib_tchar *dir,
- int unmount_flags,
- wimlib_progress_func_t progress_func);
+ int unmount_flags);
+
+/**
+ * @ingroup G_mounting_wim_images
+ *
+ * Same as wimlib_unmount_image(), but allows specifying a progress function.
+ * If changes are committed from a read-write mount, the progress function will
+ * receive ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS messages.
+ */
+extern int
+wimlib_unmount_image_with_progress(const wimlib_tchar *dir,
+ int unmount_flags,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
* @ingroup G_modifying_wims
* Number of commands in @p cmds.
* @param update_flags
* ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS or 0.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
*
- * @return 0 on success; nonzero on error. On failure, some but not all of the
- * update commands may have been executed. No individual update command will
- * have been partially executed. Possible error codes include:
+ * @return 0 on success; nonzero on error. On failure, all update commands will
+ * be rolled back, and no visible changes shall have been made to @p wim.
+ * Possible error codes include:
*
* @retval ::WIMLIB_ERR_INVALID_CAPTURE_CONFIG
* The capture configuration structure specified for an add command was
* An unknown operation type was specified in the update commands; or,
* attempted to execute an add command where ::WIMLIB_ADD_FLAG_NTFS was set
* in the @p add_flags, but the same image had previously already been
- * added from a NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
+ * added from an NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
* ::WIMLIB_ADD_FLAG_NORPFIX were specified in the @p add_flags for one add
* command; or, ::WIMLIB_ADD_FLAG_NTFS or ::WIMLIB_ADD_FLAG_RPFIX were
* specified in the @p add_flags for an add command in which @p
int image,
const struct wimlib_update_command *cmds,
size_t num_cmds,
- int update_flags,
- wimlib_progress_func_t progress_func);
+ int update_flags);
/**
* @ingroup G_writing_and_overwriting_wims
* exporting an image from a compressed WIM to another WIM of the same
* compression type without ::WIMLIB_WRITE_FLAG_RECOMPRESS specified in @p
* write_flags).
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. The possible messages are
- * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_END, and
- * ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS.
*
* @return 0 on success; nonzero on error.
*
* ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
* different reasons) to read the metadata resource for an image that needed to
* be written.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN, and
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_END.
*/
extern int
wimlib_write(WIMStruct *wim,
const wimlib_tchar *path,
int image,
int write_flags,
- unsigned num_threads,
- wimlib_progress_func_t progress_func);
+ unsigned num_threads);
/**
* @ingroup G_writing_and_overwriting_wims
int fd,
int image,
int write_flags,
- unsigned num_threads,
- wimlib_progress_func_t progress_func);
+ unsigned num_threads);
/**
* @defgroup G_compression Compression and decompression functions
wimlib_free_decompressor(struct wimlib_decompressor *decompressor);
-struct wimlib_lzx_params_old;
-struct wimlib_lzx_context_old;
-
-/** Deprecated; do not use. */
-extern int
-wimlib_lzx_set_default_params(const struct wimlib_lzx_params_old *params)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern int
-wimlib_lzx_alloc_context(const struct wimlib_lzx_params_old *params,
- struct wimlib_lzx_context_old **ctx_pp)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern void
-wimlib_lzx_free_context(struct wimlib_lzx_context_old *ctx)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern unsigned
-wimlib_lzx_compress2(const void *udata, unsigned ulen, void *cdata,
- struct wimlib_lzx_context_old *ctx)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern unsigned
-wimlib_lzx_compress(const void *udata, unsigned ulen, void *cdata)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern unsigned
-wimlib_xpress_compress(const void *udata, unsigned ulen, void *cdata)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern int
-wimlib_lzx_decompress(const void *cdata, unsigned clen,
- void *udata, unsigned ulen)
- _wimlib_deprecated;
-
-/** Deprecated; do not use. */
-extern int
-wimlib_xpress_decompress(const void *cdata, unsigned clen,
- void *udata, unsigned ulen)
- _wimlib_deprecated;
-
/**
* @}
*/
git://wimlib.net / wimlib / blobdiff