-/*
- * wimlib.h
- *
- * External header for wimlib.
+/**
+ * @file wimlib.h
+ * @brief External header for wimlib.
*
* This file contains extensive comments for generating documentation with
* Doxygen. The built HTML documentation can be viewed at
- * http://wimlib.sourceforge.net.
+ * http://wimlib.sourceforge.net. Make sure to see the <a
+ * href="modules.html">Modules page</a> to make more sense of the declarations
+ * in this header.
*/
/*
- * Copyright (C) 2012, 2013 Eric Biggers
+ * Copyright (C) 2012, 2013, 2014 Eric Biggers
*
* This file is part of wimlib, a library for working with WIM files.
*
* along with wimlib; if not, see http://www.gnu.org/licenses/.
*/
-/** \mainpage
- *
- * \section intro Introduction
+/**
+ * @mainpage
*
- * This is the documentation for the library interface of wimlib 1.5.0, a C
+ * This is the documentation for the library interface of wimlib 1.7.1, a C
* library for creating, modifying, extracting, and mounting files in the
* Windows Imaging Format. This documentation is intended for developers only.
* If you have installed wimlib and want to know how to use the @b wimlib-imagex
- * program, please see the README file or manual pages.
+ * program, please see the manual pages and also the <a
+ * href="http://sourceforge.net/p/wimlib/code/ci/master/tree/README">README
+ * file</a>.
+ *
+ * @section sec_installing Installing
+ *
+ * @subsection UNIX
+ *
+ * Download the source code from <a
+ * href="http://sourceforge.net/projects/wimlib/files">http://sourceforge.net/projects/wimlib/files</a>.
+ * Install the library by running <c>configure && make && sudo make install</c>.
+ * See the README for information about configuration options. To use wimlib in
+ * your program after installing it, include wimlib.h and link your program with
+ * <c>-lwim</c>.
+ *
+ * @subsection Windows
+ *
+ * Download the Windows binary distribution with the appropriate architecture
+ * (i686 or x86_64 --- also called "x86" and "amd64" respectively) from <a
+ * href="http://sourceforge.net/projects/wimlib/files">http://sourceforge.net/projects/wimlib/files</a>.
+ * Link your program with the libwim-15.dll file. Make sure to also download
+ * the source code so you can get wimlib.h, as it is not included in the binary
+ * distribution. If you need to access the DLL from other programming
+ * languages, note that the calling convention is "cdecl".
+ *
+ * @section sec_examples Examples
+ *
+ * Several examples are located in the <a
+ * href="http://sourceforge.net/p/wimlib/code/ci/master/tree/examples">examples</a>
+ * directory of the source distribution.
+ *
+ * There is also the <a
+ * href="http://sourceforge.net/p/wimlib/code/ci/master/tree/programs/imagex.c">
+ * source code of <b>wimlib-imagex</b></a>, which is complicated but uses most
+ * capabilities of wimlib.
+ *
+ * @section sec_basic_wim_handling_concepts Basic WIM handling concepts
+ *
+ * wimlib wraps up a WIM file in an opaque ::WIMStruct structure. There are
+ * two ways to create such a structure: wimlib_open_wim(), which opens a WIM
+ * file and creates a ::WIMStruct representing it, and wimlib_create_new_wim(),
+ * which creates a new ::WIMStruct that initially contains no images and does
+ * not yet have a backing on-disk file. See @ref G_creating_and_opening_wims
+ * for more details.
+ *
+ * A WIM file, represented by a ::WIMStruct, contains zero or more images.
+ * Images can be extracted (or "applied") using wimlib_extract_image(), added
+ * (or "captured" or "appended") using wimlib_add_image(), deleted using
+ * wimlib_delete_image(), exported using wimlib_export_image(), and updated or
+ * modified using wimlib_update_image(). However, changes made to a WIM
+ * represented by a ::WIMStruct have no persistent effect until the WIM is
+ * actually written to an on-disk file. This can be done using wimlib_write(),
+ * but if the WIM was originally opened using wimlib_open_wim(), then
+ * wimlib_overwrite() can be used instead. See @ref G_extracting_wims, @ref
+ * G_modifying_wims, and @ref G_writing_and_overwriting_wims for more details.
+ *
+ * Note that with this ::WIMStruct abstraction, performing many tasks on WIM
+ * files is a multi-step process. For example, to add, or "append" an image to
+ * an existing stand-alone WIM file in a way similar to <b>wimlib-imagex
+ * append</b>, you must call the following functions:
+ *
+ * 1. wimlib_open_wim()
+ * 2. wimlib_add_image()
+ * 3. wimlib_overwrite()
+ *
+ * This design is very much on purpose as it makes the library more useful in
+ * general by allowing functions to be composed in different ways. For example,
+ * you can make multiple changes to a WIM and commit them all to the underlying
+ * file in only one overwrite operation, which is more efficient.
+ *
+ * Note: before calling any other function declared in wimlib.h,
+ * wimlib_global_init() can (and in some cases, must) be called. See its
+ * documentation for more details.
+ *
+ * @section sec_cleaning_up Cleaning up
+ *
+ * After you are done with any ::WIMStruct, you can call wimlib_free() to free
+ * all resources associated with it. Also, when you are completely done with
+ * using wimlib in your program, you can call wimlib_global_cleanup() to free
+ * any other resources allocated by the library.
+ *
+ * @section sec_error_handling Error Handling
+ *
+ * Most functions in wimlib return 0 on success and a positive error code on
+ * failure. Use wimlib_get_error_string() to get a string that describes an
+ * error code. wimlib also can print error messages to standard error itself
+ * when an error happens, and these may be more informative than the error code;
+ * to enable this, call wimlib_set_print_errors(). Please note that this is for
+ * convenience only, and some errors can occur without a message being printed.
+ * Currently, error messages and strings (as well as all documentation, for that
+ * matter) are only available in English.
+ *
+ * @section sec_encodings Locales and character encodings
*
- * \section starting Getting Started
+ * To support Windows as well as UNIX-like systems, wimlib's API typically takes
+ * and returns strings of ::wimlib_tchar, which are in a platform-dependent
+ * encoding.
*
- * wimlib uses the GNU autotools, so, on UNIX-like systems, it should be easy to
- * install with <code>configure && make && sudo make install</code>; however,
- * please see the README for more information about installing it. To use
- * wimlib in a program after installing it, include @c wimlib.h and link your
- * program with @c -lwim.
+ * On Windows, each ::wimlib_tchar is 2 bytes and is the same as a "wchar_t",
+ * and the encoding is UTF-16LE.
*
- * wimlib wraps up a WIM file in an opaque ::WIMStruct structure. A ::WIMStruct
- * may represent either a stand-alone WIM or one part of a split WIM.
+ * On UNIX-like systems, each ::wimlib_tchar is 1 byte and is simply a "char",
+ * and the encoding is the locale-dependent multibyte encoding. I recommend you
+ * set your locale to a UTF-8 capable locale to avoid any issues. Also, by
+ * default, wimlib on UNIX will assume the locale is UTF-8 capable unless you
+ * call wimlib_global_init() after having set your desired locale.
*
- * All functions in wimlib's public API are prefixed with @c wimlib. Most
- * return 0 on success and a positive error code on failure. Use
- * wimlib_get_error_string() to get a string that describes an error code.
- * wimlib also can print error messages itself when an error happens, and these
- * may be more informative than the error code; to enable this, call
- * wimlib_set_print_errors(). Please note that this is for convenience only,
- * and some errors can occur without a message being printed.
+ * @section sec_advanced Additional information and features
*
- * First before calling any other functions, you should call
- * wimlib_global_init() to initialize the library.
*
- * To open an existing WIM, use wimlib_open_wim().
+ * @subsection subsec_mounting_wim_images Mounting WIM images
*
- * To create a new WIM that initially contains no images, use
- * wimlib_create_new_wim().
+ * See @ref G_mounting_wim_images.
*
- * To add an image to a WIM file from a directory tree on your filesystem, call
- * wimlib_add_image(). This can be done with a ::WIMStruct gotten from
- * wimlib_open_wim() or from wimlib_create_new_wim(). On UNIX-like systems,
- * wimlib_add_image() can also capture a WIM image directly from a block device
- * containing a NTFS filesystem.
+ * @subsection subsec_progress_functions Progress Messages
*
- * To extract an image from a WIM file, call wimlib_extract_image(). This can
- * be done either to a directory, or, on UNIX-like systems, directly to a block
- * device containing a NTFS filesystem.
+ * See @ref G_progress.
*
- * To extract individual files or directories from a WIM image, rather than a
- * full image, call wimlib_extract_files().
+ * @subsection subsec_non_standalone_wims Non-standalone WIMs
*
- * To programatically make changes to a WIM image without mounting it, call
- * wimlib_update_image().
+ * See @ref G_nonstandalone_wims.
*
- * On UNIX-like systems supporting FUSE (such as Linux), wimlib supports
- * mounting WIM files either read-only or read-write. Mounting is done using
- * wimlib_mount_image() and unmounting is done using wimlib_unmount_image().
- * Mounting can be done without root privileges because it is implemented using
- * FUSE (Filesystem in Userspace). If wimlib is compiled with the
- * <code>--without-fuse</code> flag, these functions will be available but will
- * fail with ::WIMLIB_ERR_UNSUPPORTED.
- *
- * After creating or modifying a WIM file, you can write it to a file using
- * wimlib_write(). Alternatively, if the WIM was originally read from a file
- * (using wimlib_open_wim() rather than wimlib_create_new_wim()), you can use
- * wimlib_overwrite() to overwrite the original file. Still alternatively, you
- * can write a WIM directly to a file descriptor by calling wimlib_write_to_fd()
- * instead.
+ * @subsection subsec_pipable_wims Pipable WIMs
*
- * wimlib supports a special "pipable" WIM format (which unfortunately is @b not
- * compatible with Microsoft's software). To create a pipable WIM, call
+ * wimlib supports a special "pipable" WIM format which unfortunately is @b not
+ * compatible with Microsoft's software. To create a pipable WIM, call
* wimlib_write(), wimlib_write_to_fd(), or wimlib_overwrite() with
* ::WIMLIB_WRITE_FLAG_PIPABLE specified. Pipable WIMs are pipable in both
* directions, so wimlib_write_to_fd() can be used to write a pipable WIM to a
* s using a seekable file descriptor using the regular function calls (e.g.
* wimlib_open_wim(), wimlib_extract_image()).
*
- * Please note: merely by calling wimlib_add_image() or many of the other
- * functions in this library that operate on ::WIMStruct's, you are @b not
- * modifying the WIM file on disk. Changes are not saved until you explicitly
- * call wimlib_write() or wimlib_overwrite().
- *
- * After you are done with the WIM file, use wimlib_free() to free all memory
- * associated with a ::WIMStruct and close all files associated with it.
+ * See the documentation for the <b>--pipable</b> flag of <b>wimlib-imagex
+ * capture</b> for more information about pipable WIMs.
*
- * When you are completely done with using wimlib in your program, you should
- * call wimlib_global_cleanup().
+ * @subsection subsec_thread_safety Thread Safety
*
- * A number of functions take a pointer to a progress function of type
- * ::wimlib_progress_func_t. This function will be called periodically during
- * the WIM operation(s) to report on the progress of the operation (for example,
- * how many bytes have been written so far).
- *
- * wimlib is thread-safe as long as different ::WIMStruct's are used, except for
- * the following exceptions:
+ * wimlib is thread-safe, with the following exceptions:
+ * - Different threads cannot operate on the same ::WIMStruct at the same time;
+ * they must use different ::WIMStruct's.
* - You must call wimlib_global_init() in one thread before calling any other
* functions.
* - wimlib_set_print_errors() and wimlib_set_memory_allocator() both apply globally.
* does so for the first time. This includes changing the working directory
* to the root directory.
*
- * \section encodings Locales and character encodings
- *
- * To support Windows as well as UNIX-like systems, wimlib's API typically takes
- * and returns strings of ::wimlib_tchar, which are in a platform-dependent
- * encoding.
- *
- * On Windows, each ::wimlib_tchar is 2 bytes and is the same as a "wchar_t",
- * and the encoding is UTF-16LE.
- *
- * On UNIX-like systems, each ::wimlib_tchar is 1 byte and is simply a "char",
- * and the encoding is the locale-dependent multibyte encoding. I recommend you
- * set your locale to a UTF-8 capable locale to avoid any issues. Also, by
- * default, wimlib on UNIX will assume the locale is UTF-8 capable unless you
- * call wimlib_global_init() after having set your desired locale.
- *
- * \section Limitations
+ * @subsection subsec_limitations Limitations
*
* This section documents some technical limitations of wimlib not already
* documented in the man page for @b wimlib-imagex.
*
* - The old WIM format from Vista pre-releases is not supported.
- * - Compressed resource chunk sizes other than 32768 are not supported. This
- * doesn't seem to be a real problem because the chunk size always seems to be
- * this value.
- * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
+ * - wimlib does not provide a clone of the @b PEImg tool, or the @b DISM
* functionality other than that already present in @b ImageX, that allows you
* to make certain Windows-specific modifications to a Windows PE image, such
- * as adding a driver or Windows component. Such a tool possibly could be
- * implemented on top of wimlib.
+ * as adding a driver or Windows component. Such a tool could be implemented
+ * on top of wimlib.
+ *
+ * @subsection more_info More information
+ *
+ * You are advised to read the README as well as the manual pages for
+ * <b>wimlib-imagex</b>, since not all relevant information is repeated here in
+ * the API documentation.
+ */
+
+/** @defgroup G_general General
+ *
+ * @brief Declarations and structures shared across the library.
+ */
+
+/** @defgroup G_creating_and_opening_wims Creating and Opening WIMs
+ *
+ * @brief Create new WIMs and open existing WIMs.
+ */
+
+/** @defgroup G_wim_information Retrieving WIM information and directory listings
+ *
+ * @brief Retrieve information about a WIM or WIM image.
+ */
+
+/** @defgroup G_modifying_wims Modifying WIMs
+ *
+ * @brief Make changes to a WIM.
+ *
+ * @section sec_adding_images Capturing and adding WIM images
+ *
+ * As described in @ref sec_basic_wim_handling_concepts, capturing a new WIM or
+ * appending an image to an existing WIM is a multi-step process, but at its
+ * core is wimlib_add_image() or an equivalent function. Normally,
+ * wimlib_add_image() takes an on-disk directory tree and logically adds it to a
+ * ::WIMStruct as a new image. However, when supported by the build of the
+ * library, there is also a special NTFS volume capture mode (entered when
+ * ::WIMLIB_ADD_FLAG_NTFS is specified) that allows adding the image directly
+ * from an unmounted NTFS volume.
+ *
+ * Another function, wimlib_add_image_multisource() is also provided. It
+ * generalizes wimlib_add_image() to allow combining multiple files or directory
+ * trees into a single WIM image in a configurable way.
+ *
+ * For maximum customization of WIM image creation, it is also possible to add a
+ * completely empty WIM image with wimlib_add_empty_image(), then update it with
+ * wimlib_update_image(). (This is in fact what wimlib_add_image() and
+ * wimlib_add_image_multisource() do internally.)
+ *
+ * Note that some details of how image addition/capture works are documented
+ * more fully in the manual page for <b>wimlib-imagex capture</b>.
+ *
+ * @section sec_deleting_images Deleting WIM images
+ *
+ * wimlib_delete_image() can delete an image from a ::WIMStruct. But as usual,
+ * wimlib_write() or wimlib_overwrite() must be called to cause the changes to
+ * be made persistent in an on-disk WIM file.
+ *
+ * @section sec_exporting_images Exporting WIM images
+ *
+ * wimlib_export_image() can copy, or "export", an image from one WIM to
+ * another.
+ *
+ * @section sec_other_modifications Other modifications
+ *
+ * wimlib_update_image() can add, delete, and rename files in a WIM image.
+ *
+ * wimlib_set_image_name(), wimlib_set_image_descripton(), and
+ * wimlib_set_image_flags() can change other image metadata.
+ *
+ * wimlib_set_wim_info() can change information about the WIM file itself, such
+ * as the boot index.
+ */
+
+/** @defgroup G_extracting_wims Extracting WIMs
+ *
+ * @brief Extract files, directories, and images from a WIM.
+ *
+ * wimlib_extract_image() extracts, or "applies", an image from a WIM,
+ * represented by a ::WIMStruct. This normally extracts the image to a
+ * directory, but when supported by the build of the library there is also a
+ * special NTFS volume extraction mode (entered when ::WIMLIB_EXTRACT_FLAG_NTFS
+ * is specified) that allows extracting a WIM image directly to an unmounted
+ * NTFS volume. Various other flags allow further customization of image
+ * extraction.
+ *
+ * wimlib_extract_paths() and wimlib_extract_pathlist() allow extracting a list
+ * of (possibly wildcard) paths from a WIM image.
+ *
+ * wimlib_extract_image_from_pipe() extracts an image from a pipable WIM sent
+ * over a pipe; see @ref subsec_pipable_wims.
+ *
+ * Some details of how WIM extraction works are documented more fully in the
+ * manual pages for <b>wimlib-imagex apply</b> and <b>wimlib-imagex extract</b>.
+ */
+
+/** @defgroup G_mounting_wim_images Mounting WIM images
+ *
+ * @brief Mount and unmount WIM images.
+ *
+ * On Linux, wimlib supports mounting images from WIM files either read-only or
+ * read-write. To mount an image, call wimlib_mount_image(). To unmount an
+ * image, call wimlib_unmount_image(). Mounting can be done without root
+ * privileges because it is implemented using FUSE (Filesystem in Userspace).
+ *
+ * If wimlib is compiled using the <code>--without-fuse</code> flag, these
+ * functions will be available but will fail with ::WIMLIB_ERR_UNSUPPORTED.
+ *
+ * Note: if mounting is unsupported, wimlib still provides another way to modify
+ * a WIM image (wimlib_update_image()).
+ */
+
+/**
+ * @defgroup G_progress Progress Messages
+ *
+ * @brief Track the progress of long WIM operations.
+ *
+ * Library users can provide a progress function which will be called
+ * periodically during operations such as extracting a WIM image or writing a
+ * WIM image. A ::WIMStruct can have a progress function of type
+ * ::wimlib_progress_func_t associated with it by calling
+ * wimlib_register_progress_function() or by opening the ::WIMStruct using
+ * wimlib_open_wim_with_progress(). Once this is done, the progress function
+ * will be called automatically during many operations, such as
+ * wimlib_extract_image() and wimlib_write().
+ *
+ * Some functions that do not operate directly on a user-provided ::WIMStruct,
+ * such as wimlib_join(), also take the progress function directly using an
+ * extended version of the function, such as wimlib_join_with_progress().
+ *
+ * In wimlib v1.7.0 and later, progress functions are no longer just
+ * unidirectional. You can now return ::WIMLIB_PROGRESS_STATUS_ABORT to cause
+ * the current operation to be aborted. wimlib v1.7.0 also added the third
+ * argument to ::wimlib_progress_func_t, which is a user-supplied context.
+ */
+
+/** @defgroup G_writing_and_overwriting_wims Writing and Overwriting WIMs
+ *
+ * @brief Write and overwrite on-disk WIM files.
+ *
+ * As described in @ref sec_basic_wim_handling_concepts, these functions are
+ * fundamental to the design of the library as they allow new or modified
+ * ::WIMStruct's to actually be written to on-disk files. Call wimlib_write()
+ * to write a new WIM file, or wimlib_overwrite() to persistently update an
+ * existing WIM file.
+ */
+
+/** @defgroup G_nonstandalone_wims Creating and handling non-standalone WIMs
+ *
+ * @brief Create and handle non-standalone WIMs, such as split and delta WIMs.
+ *
+ * Normally, a ::WIMStruct represents a WIM file, but there's a bit more to it
+ * than that. Normally, WIM files are "standalone". However, WIM files can
+ * also be arranged in non-standalone ways, such as a set of on-disk files that
+ * together form a single "split WIM" or "delta WIM". Such arrangements are
+ * fully supported by wimlib. However, as a result, in such cases a ::WIMStruct
+ * created from one of these on-disk files initially only partially represents
+ * the full WIM and needs to, in effect, be logically combined with other
+ * ::WIMStruct's before performing certain operations, such as extracting files
+ * with wimlib_extract_image() or wimlib_extract_paths(). This is done by
+ * calling wimlib_reference_resource_files() or wimlib_reference_resources().
+ *
+ * wimlib_write() can create delta WIMs as well as standalone WIMs, but a
+ * specialized function (wimlib_split()) is needed to create a split WIM.
*/
#ifndef _WIMLIB_H
#include <inttypes.h>
#include <time.h>
-/** Major version of the library (for example, the 1 in 1.2.5). */
+#ifdef __GNUC__
+# define _wimlib_deprecated __attribute__((deprecated))
+#else
+# define _wimlib_deprecated
+#endif
+
+/** @addtogroup G_general
+ * @{ */
+
+/** Major version of the library (for example, the 1 in 1.2.5). */
#define WIMLIB_MAJOR_VERSION 1
/** Minor version of the library (for example, the 2 in 1.2.5). */
-#define WIMLIB_MINOR_VERSION 5
+#define WIMLIB_MINOR_VERSION 7
/** Patch version of the library (for example, the 5 in 1.2.5). */
-#define WIMLIB_PATCH_VERSION 0
+#define WIMLIB_PATCH_VERSION 1
+
+#ifdef __cplusplus
+extern "C" {
+#endif
/**
* Opaque structure that represents a WIM file. This is an in-memory structure
*
* Use wimlib_write() or wimlib_overwrite() to actually write an on-disk WIM
* file from a ::WIMStruct.
+ *
+ * See @ref sec_basic_wim_handling_concepts for more information.
*/
#ifndef WIMLIB_WIMSTRUCT_DECLARED
typedef struct WIMStruct WIMStruct;
#ifdef __WIN32__
typedef wchar_t wimlib_tchar;
#else
-/** See \ref encodings */
+/** See @ref sec_encodings */
typedef char wimlib_tchar;
#endif
#ifdef __WIN32__
-/** Path separator for WIM paths passed back to progress callbacks. */
+/** Path separator for WIM paths passed back to progress callbacks.
+ * This is forward slash on UNIX and backslash on Windows. */
# define WIMLIB_WIM_PATH_SEPARATOR '\\'
# define WIMLIB_WIM_PATH_SEPARATOR_STRING L"\\"
#else
-/** Path separator for WIM paths passed back to progress callbacks. */
+/** Path separator for WIM paths passed back to progress callbacks.
+ * This is forward slash on UNIX and backslash on Windows. */
# define WIMLIB_WIM_PATH_SEPARATOR '/'
# define WIMLIB_WIM_PATH_SEPARATOR_STRING "/"
#endif
-#ifdef __GNUC__
-# define _wimlib_deprecated __attribute__((deprecated))
-#else
-# define _wimlib_deprecated
-#endif
+/** Use this to specify the root directory of the WIM image. */
+#define WIMLIB_WIM_ROOT_PATH WIMLIB_WIM_PATH_SEPARATOR_STRING
+/** Use this to test if the specified path refers to the root directory of the
+ * WIM image. */
+#define WIMLIB_IS_WIM_ROOT_PATH(path) \
+ ((path)[0] == WIMLIB_WIM_PATH_SEPARATOR && \
+ (path)[1] == 0)
+
+/** Length of a Globally Unique Identifier (GUID) */
#define WIMLIB_GUID_LEN 16
/**
- * Specifies the compression type of a WIM file.
+ * Specifies a compression format. Pass one of these values to
+ * wimlib_create_new_wim(), wimlib_set_output_compression_type(),
+ * wimlib_create_compressor(), or wimlib_create_decompressor().
+ *
+ * A WIM file has one default compression type and chunk size. Normally, each
+ * resource in the WIM file is compressed with this compression type. However,
+ * resources may be stored as uncompressed; for example, wimlib will do so if a
+ * resource does not compress to less than its original size. In addition, a
+ * WIM with the new version number of 3584, or "ESD file", might contain solid
+ * blocks with different compression types.
*/
enum wimlib_compression_type {
- /** An invalid compression type. */
- WIMLIB_COMPRESSION_TYPE_INVALID = -1,
-
- /** The WIM does not include any compressed resources. */
+ /**
+ * No compression.
+ *
+ * This is a valid argument to wimlib_create_new_wim() and
+ * wimlib_set_output_compression_type(), but not to the functions in the
+ * compression API such as wimlib_create_compressor().
+ */
WIMLIB_COMPRESSION_TYPE_NONE = 0,
- /** Compressed resources in the WIM use LZX compression. */
- WIMLIB_COMPRESSION_TYPE_LZX = 1,
+ /**
+ * The XPRESS compression format. This format combines Lempel-Ziv
+ * factorization with Huffman encoding. Compression and decompression
+ * are both fast. This format supports chunk sizes that are powers of 2
+ * between <c>2^12</c> and <c>2^16</c>, inclusively.
+ *
+ * wimlib's XPRESS compressor will, with the default settings, usually
+ * produce a better compression ratio, and work more quickly, than the
+ * implementation in Microsoft's WIMGAPI (as of Windows 8.1).
+ * Non-default compression levels are also supported. For example,
+ * level 80 will enable two-pass optimal parsing, which is significantly
+ * slower but usually improves compression by several percent over the
+ * default level of 50.
+ *
+ * If using wimlib_create_compressor() to create an XPRESS compressor
+ * directly, the @p max_block_size parameter may be any positive value
+ * up to <c>2^16</c>.
+ */
+ WIMLIB_COMPRESSION_TYPE_XPRESS = 1,
+
+ /**
+ * The LZX compression format. This format combines Lempel-Ziv
+ * factorization with Huffman encoding, but with more features and
+ * complexity than XPRESS. Compression is slow to somewhat fast,
+ * depending on the settings. Decompression is fast but slower than
+ * XPRESS. This format supports chunk sizes that are powers of 2
+ * between <c>2^15</c> and <c>2^21</c>, inclusively. Note: chunk sizes
+ * other than <c>2^15</c> are not compatible with the Microsoft
+ * implementation.
+ *
+ * wimlib's LZX compressor will, with the default settings, usually
+ * produce a better compression ratio, and work more quickly, than the
+ * implementation in Microsoft's WIMGAPI (as of Windows 8.1).
+ * Non-default compression levels are also supported. For example,
+ * level 20 will provide fast compression, almost as fast as XPRESS.
+ *
+ * If using wimlib_create_compressor() to create an LZX compressor
+ * directly, the @p max_block_size parameter may be any positive value
+ * up to <c>2^21</c>.
+ */
+ WIMLIB_COMPRESSION_TYPE_LZX = 2,
- /** Compressed resources in the WIM use XPRESS compression. */
- WIMLIB_COMPRESSION_TYPE_XPRESS = 2,
+ /**
+ * The LZMS compression format. This format combines Lempel-Ziv
+ * factorization with adaptive Huffman encoding and range coding.
+ * Compression and decompression are both fairly slow. This format
+ * supports chunk sizes that are powers of 2 between <c>2^15</c> and
+ * <c>2^30</c>, inclusively. This format is best used for large chunk
+ * sizes. Note: LZMS compression is only compatible with wimlib v1.6.0
+ * and later, WIMGAPI Windows 8 and later, and DISM Windows 8.1 and
+ * later. Also, chunk sizes larger than <c>2^26</c> are not compatible
+ * with the Microsoft implementation.
+ *
+ * wimlib's LZMS compressor is currently faster but will usually not
+ * compress as much as the implementation in Microsoft's WIMGAPI
+ * (Windows 8.1).
+ *
+ * If using wimlib_create_compressor() to create an LZMS compressor
+ * directly, the @p max_block_size parameter may be any positive value
+ * up to <c>2^31 - 2</c>.
+ */
+ WIMLIB_COMPRESSION_TYPE_LZMS = 3,
};
+/** @} */
+/** @addtogroup G_progress
+ * @{ */
+
/** Possible values of the first parameter to the user-supplied
* ::wimlib_progress_func_t progress function */
enum wimlib_progress_msg {
/** A WIM image is about to be extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
+ * ::wimlib_progress_info.extract. This message is received once per
+ * image for calls to wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe(). */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN = 0,
- /** A file or directory tree within a WIM image (not the full image) is
- * about to be extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
-
- /** The directory structure of the WIM image is about to be extracted.
- * @p info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
-
- /** The directory structure of the WIM image has been successfully
- * extracted. @p info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
-
- /** The WIM image's files resources are currently being extracted. @p
- * info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
+ /** One or more file or directory trees within a WIM image is about to
+ * be extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This message is received only once per wimlib_extract_paths() and
+ * wimlib_extract_pathlist(), since wimlib combines all paths into a
+ * single extraction operation for optimization purposes. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN = 1,
+
+ /** This message may be sent periodically (not for every file) while
+ * files or directories are being created, prior to data stream
+ * extraction. @p info will point to ::wimlib_progress_info.extract.
+ * In particular, the @p current_file_count and @p end_file_count
+ * members may be used to track the progress of this phase of
+ * extraction. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE = 3,
+
+ /** File data is currently being extracted. @p info will point to
+ * ::wimlib_progress_info.extract. This is the main message to track
+ * the progress of an extraction operation. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS = 4,
/** Starting to read a new part of a split pipable WIM over the pipe.
* @p info will point to ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
-
- /** All the WIM files and directories have been extracted, and
- * timestamps are about to be applied. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS,
-
- /** A WIM image has been successfully extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END,
-
- /** A file or directory tree within a WIM image (not the full image) has
- * been successfully extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
- WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
-
- /** The directory or NTFS volume is about to be scanned to build a tree
- * of WIM dentries in-memory. @p info will point to
- * ::wimlib_progress_info.scan. */
- WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
-
- /** A directory or file is being scanned. @p info will point to
+ WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN = 5,
+
+ /** This message may be sent periodically (not for every file) while
+ * file and directory metadata is being applied, following data stream
+ * extraction. @p info will point to ::wimlib_progress_info.extract.
+ * In particular, the @p current_file_count and @p end_file_count
+ * members may be used to track the progress of this phase of
+ * extraction. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_METADATA = 6,
+
+ /** Confirms that the image has been successfully extracted. @p info
+ * will point to ::wimlib_progress_info.extract. This is paired with
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END = 7,
+
+ /** Confirms that the files or directory trees have been successfully
+ * extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This is paired with ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN. */
+ WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END = 8,
+
+ /** The directory or NTFS volume is about to be scanned for metadata.
+ * @p info will point to ::wimlib_progress_info.scan. This message is
+ * received once per call to wimlib_add_image(), or once per capture
+ * source passed to wimlib_add_image_multisource(), or once per add
+ * command passed to wimlib_update_image(). */
+ WIMLIB_PROGRESS_MSG_SCAN_BEGIN = 9,
+
+ /** A directory or file has been scanned. @p info will point to
* ::wimlib_progress_info.scan, and its @p cur_path member will be
- * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE
- * is passed to wimlib_add_image(). */
- WIMLIB_PROGRESS_MSG_SCAN_DENTRY,
-
- /** The directory or NTFS volume has been successfully scanned, and a
- * tree of WIM dentries has been built in-memory. @p info will point to
- * ::wimlib_progress_info.scan. */
- WIMLIB_PROGRESS_MSG_SCAN_END,
+ * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE has
+ * been specified. */
+ WIMLIB_PROGRESS_MSG_SCAN_DENTRY = 10,
+
+ /** Confirms that the directory or NTFS volume has been successfully
+ * scanned. @p info will point to ::wimlib_progress_info.scan. This is
+ * paired with a previous ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN message,
+ * possibly with many intervening ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY
+ * messages. */
+ WIMLIB_PROGRESS_MSG_SCAN_END = 11,
+
+ /** File resources ("streams") are currently being written to the WIM.
+ * @p info will point to ::wimlib_progress_info.write_streams. This
+ * message may be received many times while the WIM file is being
+ * written or appended to with wimlib_write(), wimlib_overwrite(), or
+ * wimlib_write_to_fd(). */
+ WIMLIB_PROGRESS_MSG_WRITE_STREAMS = 12,
+
+ /** Per-image metadata is about to be written to the WIM file. @p info
+ * will not be valid. */
+ WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN = 13,
+
+ /** Confirms that per-image metadata has been successfully been written
+ * to the WIM file. @p info will not be valid. This message is paired
+ * with a preceding ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN message.
+ */
+ WIMLIB_PROGRESS_MSG_WRITE_METADATA_END = 14,
+
+ /** wimlib_overwrite() has successfully renamed the temporary file to
+ * the original WIM file, thereby committing the update. @p info will
+ * point to ::wimlib_progress_info.rename. Note: this message is not
+ * received if wimlib_overwrite() chose to append to the WIM file
+ * in-place. */
+ WIMLIB_PROGRESS_MSG_RENAME = 15,
+
+ /** The contents of the WIM file are being checked against the integrity
+ * table. @p info will point to ::wimlib_progress_info.integrity. This
+ * message is only received (and may be received many times) when
+ * wimlib_open_wim_with_progress() is called with the
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY flag. */
+ WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY = 16,
- /**
- * File resources are currently being written to the WIM.
- * @p info will point to ::wimlib_progress_info.write_streams. */
- WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
+ /** An integrity table is being calculated for the WIM being written.
+ * @p info will point to ::wimlib_progress_info.integrity. This message
+ * is only received (and may be received many times) when a WIM file is
+ * being written with the flag ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
+ WIMLIB_PROGRESS_MSG_CALC_INTEGRITY = 17,
- /**
- * The metadata resource for each image is about to be written to the
- * WIM. @p info will not be valid. */
- WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN,
+ /** A wimlib_split() operation is in progress, and a new split part is
+ * about to be started. @p info will point to
+ * ::wimlib_progress_info.split. */
+ WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART = 19,
- /**
- * The metadata resource for each image has successfully been writen to
- * the WIM. @p info will not be valid. */
- WIMLIB_PROGRESS_MSG_WRITE_METADATA_END,
+ /** A wimlib_split() operation is in progress, and a split part has been
+ * finished. @p info will point to ::wimlib_progress_info.split. */
+ WIMLIB_PROGRESS_MSG_SPLIT_END_PART = 20,
+
+ /** A WIM update command is just about to be executed. @p info will
+ * point to ::wimlib_progress_info.update. This message is received
+ * once per update command when wimlib_update_image() is called with the
+ * flag ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS. */
+ WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND = 21,
+
+ /** A WIM update command has just been executed. @p info will point to
+ * ::wimlib_progress_info.update. This message is received once per
+ * update command when wimlib_update_image() is called with the flag
+ * ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS. */
+ WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND = 22,
+
+ /** A file in the WIM image is being replaced as a result of a
+ * ::wimlib_add_command without ::WIMLIB_ADD_FLAG_NO_REPLACE specified.
+ * @p info will point to ::wimlib_progress_info.replace. This is only
+ * received when ::WIMLIB_ADD_FLAG_VERBOSE is also specified in the add
+ * command. */
+ WIMLIB_PROGRESS_MSG_REPLACE_FILE_IN_WIM = 23,
+
+ /** A WIM image is being applied with ::WIMLIB_EXTRACT_FLAG_WIMBOOT, and
+ * a file is being extracted normally (not as a WIMBoot "pointer file")
+ * due to it matching a pattern in the [PrepopulateList] section of the
+ * configuration file @c \\Windows\\System32\\WimBootCompress.ini in the
+ * WIM image. @p info will point to
+ * ::wimlib_progress_info.wimboot_exclude.
+ */
+ WIMLIB_PROGRESS_MSG_WIMBOOT_EXCLUDE = 24,
- /**
- * The temporary file has successfully been renamed to the original WIM
- * file. Only happens when wimlib_overwrite() is called and the
- * overwrite is not done in-place.
- * @p info will point to ::wimlib_progress_info.rename. */
- WIMLIB_PROGRESS_MSG_RENAME,
-
- /** The contents of the WIM are being checked against the integrity
- * table. Only happens when wimlib_open_wim() is called with the
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY flag. @p info will point to
- * ::wimlib_progress_info.integrity. */
- WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY,
+ /** Starting to unmount a WIM image. @p info will point to
+ * ::wimlib_progress_info.unmount. */
+ WIMLIB_PROGRESS_MSG_UNMOUNT_BEGIN = 25,
- /** An integrity table is being calculated for the WIM being written.
- * Only happens when wimlib_write() or wimlib_overwrite() is called with
- * the ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY flag. @p info will point to
- * ::wimlib_progress_info.integrity. */
- WIMLIB_PROGRESS_MSG_CALC_INTEGRITY,
+ /** wimlib has used a file's data for the last time (including all data
+ * streams, if it has multiple). @p info will point to
+ * ::wimlib_progress_info.done_with_file. This message is only received
+ * if ::WIMLIB_WRITE_FLAG_SEND_DONE_WITH_FILE_MESSAGES was provided. */
+ WIMLIB_PROGRESS_MSG_DONE_WITH_FILE = 26,
- /** Reserved. (Previously used for WIMLIB_PROGRESS_MSG_JOIN_STREAMS,
- * but in wimlib v1.5.0 this was removed to simplify the code and now
- * you'll get ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS messages instead.) */
- WIMLIB_PROGRESS_MSG_RESERVED,
+ /** wimlib_verify_wim() is starting to verify the metadata for an image.
+ * @p info will point to ::wimlib_progress_info.verify_image. */
+ WIMLIB_PROGRESS_MSG_BEGIN_VERIFY_IMAGE = 27,
- /** A wimlib_split() operation is in progress, and a new split part is
- * about to be started. @p info will point to
- * ::wimlib_progress_info.split. */
- WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART,
+ /** wimlib_verify_wim() has finished verifying the metadata for an
+ * image. @p info will point to ::wimlib_progress_info.verify_image.
+ */
+ WIMLIB_PROGRESS_MSG_END_VERIFY_IMAGE = 28,
- /** A wimlib_split() operation is in progress, and a split part has been
- * finished. @p info will point to ::wimlib_progress_info.split. */
- WIMLIB_PROGRESS_MSG_SPLIT_END_PART,
+ /** wimlib_verify_wim() is verifying stream integrity. @p info will
+ * point to ::wimlib_progress_info.verify_streams. */
+ WIMLIB_PROGRESS_MSG_VERIFY_STREAMS = 29,
/**
- * A WIM update command is just about to be executed; @p info will point
- * to ::wimlib_progress_info.update.
+ * The progress function is being asked whether a file should be
+ * excluded from capture or not. @p info will point to
+ * ::wimlib_progress_info.test_file_exclusion. This is a bidirectional
+ * message that allows the progress function to set a flag if the file
+ * should be excluded.
+ *
+ * This message is only received if the flag
+ * ::WIMLIB_ADD_FLAG_TEST_FILE_EXCLUSION is used. This method for file
+ * exclusions is independent of the "capture configuration file"
+ * mechanism.
*/
- WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND,
+ WIMLIB_PROGRESS_MSG_TEST_FILE_EXCLUSION = 30,
+};
- /**
- * A WIM update command has just been executed; @p info will point to
- * ::wimlib_progress_info.update.
+/** Valid return values from user-provided progress functions
+ * (::wimlib_progress_func_t).
+ *
+ * (Note: if an invalid value is returned, ::WIMLIB_ERR_UNKNOWN_PROGRESS_STATUS
+ * will be issued.)
+ */
+enum wimlib_progress_status {
+
+ /** The operation should be continued. This is the normal return value.
*/
- WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND,
+ WIMLIB_PROGRESS_STATUS_CONTINUE = 0,
+ /** The operation should be aborted. This will cause the current
+ * operation to fail with ::WIMLIB_ERR_ABORTED_BY_PROGRESS. */
+ WIMLIB_PROGRESS_STATUS_ABORT = 1,
};
-/** A pointer to this union is passed to the user-supplied
+/**
+ * A pointer to this union is passed to the user-supplied
* ::wimlib_progress_func_t progress function. One (or none) of the structures
* contained in this union will be applicable for the operation
* (::wimlib_progress_msg) indicated in the first argument to the progress
/* N.B. I wanted these to be anonymous structs, but Doxygen won't
* document them if they aren't given a name... */
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS. */
+ /** Valid on the message ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS. This is
+ * the primary message for tracking the progress of writing a WIM file.
+ */
struct wimlib_progress_info_write_streams {
- /** Number of bytes that are going to be written for all the
- * streams combined. This is the amount in uncompressed data.
- * (The actual number of bytes will be less if the data is being
- * written compressed.) */
+ /** Total number of uncompressed bytes of stream data being
+ * written. This can be thought of as the total uncompressed
+ * size of the files being archived, with some caveats. WIM
+ * files use single-instance streams, so the size provided here
+ * only counts distinct streams, except for the following
+ * exception: the size provided here may include the sizes of
+ * all newly added (e.g. with wimlib_add_image() streams,
+ * pending automatic de-duplication during the write operation
+ * itself. When each such stream de-duplication occurs, this
+ * number will be decreased by the size of the duplicate stream
+ * that need not be written.
+ *
+ * In the case of a wimlib_overwrite() that the library opted to
+ * perform in-place, both @p total_streams and @p total_bytes
+ * will only count the streams actually being written and not
+ * pre-existing streams in the WIM file. */
uint64_t total_bytes;
- /** Number of streams that are going to be written. */
+ /** Total number of streams being written. This can be thought
+ * of as the total number of files being archived, with some
+ * caveats. In general, a single file or directory may contain
+ * multiple data streams, each of which will be represented
+ * separately in this number. Furthermore, WIM files use
+ * single-instance streams, so the stream count provided here
+ * only counts distinct streams, except for the following
+ * exception: the stream count provided here may include newly
+ * added (e.g. with wimlib_add_image() streams, pending
+ * automatic de-duplication during the write operation itself.
+ * When each such stream de-duplication occurs, this number will
+ * be decreased by 1 to account for the duplicate stream that
+ * need not be written. */
uint64_t total_streams;
- /** Number of uncompressed bytes that have been written so far.
- * Will be 0 initially, and equal to @p total_bytes at the end.
- * */
+ /** Number of uncompressed bytes of stream data that have been
+ * written so far. This number be 0 initially, and will be
+ * equal to @p total_bytes at the end of the write operation.
+ * Note that @p total_bytes (but not @p completed_bytes) may
+ * decrease throughout the write operation due to the discovery
+ * of stream duplications. */
uint64_t completed_bytes;
- /** Number of streams that have been written. Will be 0
- * initially, and equal to @p total_streams at the end. */
+ /** Number of streams that have been written so far. This
+ * number will be 0 initially, and will be equal to @p
+ * total_streams at the end of the write operation. Note that
+ * @p total_streams (but not @p completed_streams) may decrease
+ * throughout the write operation due to the discovery of stream
+ * duplications.
+ *
+ * For applications that wish to calculate a simple "percent
+ * complete" for the write operation, it will likely be more
+ * accurate to calculate the percentage from @p completed_bytes
+ * and @p total_bytes rather than @p completed_streams and
+ * @p total_streams because the time for the operation to
+ * complete is mainly determined by the number of bytes that
+ * need to be read, compressed, and written, not just the number
+ * of files being archived. */
uint64_t completed_streams;
- /** Number of threads that are being used to compress resources
- * (if applicable). */
- unsigned num_threads;
+ /** Number of threads that are being used to compress streams,
+ * or 1 if streams are being written uncompressed. */
+ uint32_t num_threads;
- /** The compression type being used to write the streams; either
- * ::WIMLIB_COMPRESSION_TYPE_NONE,
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS, or
- * ::WIMLIB_COMPRESSION_TYPE_LZX. */
- int compression_type;
+ /** The compression type being used to write the streams, as one
+ * of the ::wimlib_compression_type constants. */
+ int32_t compression_type;
/** Number of split WIM parts from which streams are being
- * written (may be 0 if irrelevant). */
- unsigned total_parts;
+ * written (may be 0 if irrelevant). */
+ uint32_t total_parts;
- /** Number of split WIM parts from which streams have been
- * written (may be 0 if irrelevant). */
- unsigned completed_parts;
+ /** This is currently broken and will always be 0. */
+ uint32_t completed_parts;
} write_streams;
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY, and
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
struct wimlib_progress_info_scan {
- /** Directory or NTFS volume that is being scanned. */
+ /** Top-level directory being scanned; or, when capturing an NTFS
+ * volume with ::WIMLIB_ADD_FLAG_NTFS, this is instead the path
+ * to the file or block device that contains the NTFS volume
+ * being scanned. */
const wimlib_tchar *source;
- /** Path to the file or directory that is about to be scanned,
- * relative to the root of the image capture or the NTFS volume.
- * */
+ /** Path to the file (or directory) that has been scanned, valid
+ * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing an NTFS
+ * volume with ::WIMLIB_ADD_FLAG_NTFS, this path will be
+ * relative to the root of the NTFS volume. */
const wimlib_tchar *cur_path;
+ /** Dentry scan status, valid on
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. */
enum {
- /** File or directory looks okay and will be captured. */
+ /** The file looks okay and will be captured. */
WIMLIB_SCAN_DENTRY_OK = 0,
- /** File or directory is being excluded from capture due
- * to the capture configuration file. */
+ /** File is being excluded from capture due to the
+ * capture configuration. */
WIMLIB_SCAN_DENTRY_EXCLUDED,
- /** File or directory is being excluded from capture due
- * to being unsupported (e.g. an encrypted or device
- * file). */
+ /** File is being excluded from capture due to being
+ * unsupported (e.g. an encrypted or device file). */
WIMLIB_SCAN_DENTRY_UNSUPPORTED,
+
+ /** The file is an absolute symbolic link or junction
+ * that points into the capture directory, and
+ * reparse-point fixups are enabled, so its target is
+ * being adjusted. (Reparse point fixups can be
+ * disabled with the flag ::WIMLIB_ADD_FLAG_NORPFIX.)
+ */
+ WIMLIB_SCAN_DENTRY_FIXED_SYMLINK,
+
+ /** Reparse-point fixups are enabled, but the file is an
+ * absolute symbolic link or junction that does
+ * <b>not</b> point into the capture directory, so its
+ * target is <b>not</b> being adjusted. */
+ WIMLIB_SCAN_DENTRY_NOT_FIXED_SYMLINK,
} status;
- /** Target path in the WIM. Only valid on messages
- * ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
- const wimlib_tchar *wim_target_path;
+ union {
+ /** Target path in the WIM image. Only valid on
+ * messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
+ const wimlib_tchar *wim_target_path;
+
+ /** For ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY and a status
+ * of @p WIMLIB_SCAN_DENTRY_FIXED_SYMLINK or @p
+ * WIMLIB_SCAN_DENTRY_NOT_FIXED_SYMLINK, this is the
+ * target of the absolute symbolic link or junction. */
+ const wimlib_tchar *symlink_target;
+ };
+
+ /** Number of directories scanned so far, including the root
+ * directory but excluding any unsupported/excluded directories.
+ *
+ * Details: On Windows and in NTFS capture mode, a reparse point
+ * counts as a directory if and only if it has
+ * FILE_ATTRIBUTE_DIRECTORY set. Otherwise, a symbolic link
+ * counts as a directory if and only if when fully dereferenced
+ * it points to an accessible directory. If a file has multiple
+ * names (hard links), it is only counted one time. */
+ uint64_t num_dirs_scanned;
+
+ /** Number of non-directories scanned so far, excluding any
+ * unsupported/excluded files.
+ *
+ * Details: On Windows and in NTFS capture mode, a reparse point
+ * counts as a non-directory if and only if it does not have
+ * FILE_ATTRIBUTE_DIRECTORY set. Otherwise, a symbolic link
+ * counts as a non-directory if and only if when fully
+ * dereferenced it points to a non-directory or its target is
+ * inaccessible. If a file has multiple names (hard links), it
+ * is only counted one time. */
+ uint64_t num_nondirs_scanned;
+
+ /** Number of bytes of file data that have been detected so far.
+ *
+ * Details: This data may not actually have been read yet, and
+ * it will not actually be written to the WIM file until
+ * wimlib_write() or wimlib_overwrite() has been called. Data
+ * from excluded files is not counted. This number includes
+ * default file contents as well as named data streams and
+ * reparse point data. The size of reparse point data is
+ * tallied after any reparse-point fixups, and in the case of
+ * capturing a symbolic link on a UNIX-like system, the creation
+ * of the reparse point data itself. If a file has multiple
+ * names (hard links), its size(s) are only counted one time.
+ * On Windows, encrypted files have their encrypted size
+ * counted, not their unencrypted size; however, compressed
+ * files have their uncompressed size counted. */
+ uint64_t num_bytes_scanned;
} scan;
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS, and
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END. */
+ /** Valid on messages
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_METADATA,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END, and
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END.
+ *
+ * Note: most of the time of an extraction operation will be spent
+ * extracting streams, and the application will receive
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS during this time. Using @p
+ * completed_bytes and @p total_bytes, the application can calculate a
+ * percentage complete. However, note that this message does not, in
+ * general, actually provide information about which "file" is currently
+ * being extracted. This is because wimlib, by default, extracts the
+ * individual data streams in whichever order it determines to be the
+ * most efficient.
+ */
struct wimlib_progress_info_extract {
- /** Number of the image being extracted (1-based). */
- int image;
+ /** Number of the image from which files are being extracted
+ * (1-based). */
+ uint32_t image;
- /** Flags passed to to wimlib_extract_image() */
- int extract_flags;
+ /** Extraction flags being used. */
+ uint32_t extract_flags;
- /** Full path to the WIM file being extracted. */
+ /** Full path to the WIM file from which files are being
+ * extracted, or @c NULL if the WIMStruct has no associated
+ * on-disk file. */
const wimlib_tchar *wimfile_name;
- /** Name of the image being extracted. */
+ /** Name of the image from which files are being extracted, or
+ * the empty string if the image is unnamed. */
const wimlib_tchar *image_name;
- /** Directory or NTFS volume to which the image is being
- * extracted. */
+ /** Path to the directory or NTFS volume to which the files are
+ * being extracted. */
const wimlib_tchar *target;
/** Reserved. */
- const wimlib_tchar *cur_path;
+ const wimlib_tchar *reserved;
/** Number of bytes of uncompressed data that will be extracted.
- * Takes into account hard links (they are not counted for each
- * link.) */
+ * If a file has multiple names (hard links), its size (or
+ * sizes, in the case of named data streams) is only counted one
+ * time. For "reparse points" and symbolic links, the size to
+ * be extracted is the size of the reparse data buffer.
+ *
+ * This number will stay constant throughout the extraction. */
uint64_t total_bytes;
- /** Number of bytes that have been written so far. Will be 0
- * initially, and equal to @p total_bytes at the end. */
+ /** Number of bytes of uncompressed data that have been
+ * extracted so far. This initially be 0 and will equal to @p
+ * total_bytes at the end of the extraction. */
uint64_t completed_bytes;
- /** Number of streams that will be extracted. This may more or
- * less than the number of "files" to be extracted due to
- * special cases (hard links, symbolic links, and alternate data
- * streams.) */
- uint64_t num_streams;
+ /** Number of (not necessarily unique) streams that will be
+ * extracted. This may be more or less than the number of
+ * "files" to be extracted due to hard links as well as
+ * potentially multiple streams per file (named data streams).
+ * A "stream" may be the default contents of a file, a named
+ * data stream, or a reparse data buffer. */
+ uint64_t total_streams;
- /** Path to the root dentry within the WIM for the tree that is
- * being extracted. Will be the empty string when extracting a
- * full image. */
- const wimlib_tchar *extract_root_wim_source_path;
+ /** Number of (not necessarily unique) streams that have been
+ * extracted so far. */
+ uint64_t completed_streams;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
-
- unsigned part_number;
+ uint32_t part_number;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
- unsigned total_parts;
+ uint32_t total_parts;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
uint8_t guid[WIMLIB_GUID_LEN];
+
+ /** For ::WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE and
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_METADATA messages, this is the
+ * number of files that have been processed so far. Once the
+ * corresponding phase of extraction is complete, this value
+ * will be equal to @c end_file_count. */
+ uint64_t current_file_count;
+
+ /** For ::WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE and
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_METADATA messages, this is
+ * total number of files that will be processed.
+ *
+ * This number is provided for informational purposes only.
+ * This number will not necessarily be equal to the number of
+ * files actually being extracted. This is because extraction
+ * backends are free to implement an extraction algorithm that
+ * might be more efficient than processing every file in the
+ * "extract file structure" and "extract metadata" phases. For
+ * example, the current implementation of the UNIX extraction
+ * backend will create files on-demand during the stream
+ * extraction phase. Therefore, when using that particular
+ * extraction backend, @p end_file_count will only include
+ * directories and empty files. */
+ uint64_t end_file_count;
} extract;
/** Valid on messages ::WIMLIB_PROGRESS_MSG_RENAME. */
/** Name of the split WIM part that is about to be started
* (::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART) or has just been
- * finished (::WIMLIB_PROGRESS_MSG_SPLIT_END_PART). */
- const wimlib_tchar *part_name;
+ * finished (::WIMLIB_PROGRESS_MSG_SPLIT_END_PART).
+ * As of wimlib v1.7.0, the library user may change this when
+ * receiving ::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART in order to
+ * cause the next split WIM part to be written to a different
+ * location. */
+ wimlib_tchar *part_name;
} split;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_REPLACE_FILE_IN_WIM */
+ struct wimlib_progress_info_replace {
+ /** Path to the file in the WIM image that is being replaced */
+ const wimlib_tchar *path_in_wim;
+ } replace;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_WIMBOOT_EXCLUDE */
+ struct wimlib_progress_info_wimboot_exclude {
+ /** Path to the file in the WIM image */
+ const wimlib_tchar *path_in_wim;
+
+ /** Path to which the file is being extracted */
+ const wimlib_tchar *extraction_path;
+ } wimboot_exclude;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_UNMOUNT_BEGIN. */
+ struct wimlib_progress_info_unmount {
+ /** Path to directory being unmounted */
+ const wimlib_tchar *mountpoint;
+
+ /** Path to WIM file being unmounted */
+ const wimlib_tchar *mounted_wim;
+
+ /** 1-based index of image being unmounted. */
+ uint32_t mounted_image;
+
+ /** Flags that were passed to wimlib_mount_image() when the
+ * mountpoint was set up. */
+ uint32_t mount_flags;
+
+ /** Flags passed to wimlib_unmount_image(). */
+ uint32_t unmount_flags;
+ } unmount;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_DONE_WITH_FILE. */
+ struct wimlib_progress_info_done_with_file {
+ /* Path to the file whose data has been written to the WIM file,
+ * or is currently being asynchronously compressed in memory,
+ * and therefore is no longer needed by wimlib.
+ *
+ * WARNING: The file data will not actually be accessible in the
+ * WIM file until the WIM file has been completely written.
+ * Ordinarily you should <b>not</b> treat this message as a
+ * green light to go ahead and delete the specified file, since
+ * that would result in data loss if the WIM file cannot be
+ * successfully created for any reason.
+ *
+ * If a file has multiple names (hard links),
+ * ::WIMLIB_PROGRESS_MSG_DONE_WITH_FILE will only be received
+ * for one name. Also, this message will not be received for
+ * empty files or reparse points (or symbolic links), unless
+ * they have nonempty named data streams.
+ */
+ const wimlib_tchar *path_to_file;
+ } done_with_file;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_BEGIN_VERIFY_IMAGE and
+ * ::WIMLIB_PROGRESS_MSG_END_VERIFY_IMAGE. */
+ struct wimlib_progress_info_verify_image {
+ const wimlib_tchar *wimfile;
+ uint32_t total_images;
+ uint32_t current_image;
+ } verify_image;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_VERIFY_STREAMS. */
+ struct wimlib_progress_info_verify_streams {
+ const wimlib_tchar *wimfile;
+ uint64_t total_streams;
+ uint64_t total_bytes;
+ uint64_t completed_streams;
+ uint64_t completed_bytes;
+ } verify_streams;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_TEST_FILE_EXCLUSION. */
+ struct wimlib_progress_info_test_file_exclusion {
+
+ /**
+ * Path to the file for which exclusion is being tested.
+ *
+ * UNIX capture mode: The path will be a standard relative or
+ * absolute UNIX filesystem path.
+ *
+ * NTFS-3g capture mode: The path will be given relative to the
+ * root of the NTFS volume, with a leading slash.
+ *
+ * Windows capture mode: The path will be a Win32 namespace
+ * path to the file.
+ */
+ const wimlib_tchar *path;
+
+ /**
+ * Indicates whether the file or directory will be excluded from
+ * capture or not. This will be <tt>false</tt> by default. The
+ * progress function can set this to <tt>true</tt> if it decides
+ * that the file needs to be excluded.
+ */
+ bool will_exclude;
+ } test_file_exclusion;
};
-/** A user-supplied function that will be called periodically during certain WIM
- * operations. The first argument will be the type of operation that is being
- * performed or is about to be started or has been completed. The second
- * argument will be a pointer to one of a number of structures depending on the
- * first argument. It may be @c NULL for some message types.
+/**
+ * A user-supplied function that will be called periodically during certain WIM
+ * operations.
+ *
+ * The first argument will be the type of operation that is being performed or
+ * is about to be started or has been completed.
*
- * The return value of the progress function is currently ignored, but it may do
- * something in the future. (Set it to 0 for now.)
+ * The second argument will be a pointer to one of a number of structures
+ * depending on the first argument. It may be @c NULL for some message types.
+ * Note that although this argument is not @c const, users should not modify it
+ * except in explicitly documented cases.
+ *
+ * The third argument will be a user-supplied value that was provided when
+ * registering or specifying the progress function.
+ *
+ * This function must return one of the ::wimlib_progress_status values. By
+ * default, you should return ::WIMLIB_PROGRESS_STATUS_CONTINUE (0).
*/
-typedef int (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
- const union wimlib_progress_info *info);
+typedef enum wimlib_progress_status
+ (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
+ union wimlib_progress_info *info,
+ void *progctx);
+
+/** @} */
+/** @addtogroup G_modifying_wims
+ * @{ */
/** An array of these structures is passed to wimlib_add_image_multisource() to
* specify the sources from which to create a WIM image. */
* filesystem to be included in the WIM image. */
wimlib_tchar *fs_source_path;
- /** Destination path in the WIM image. Leading and trailing slashes are
- * ignored. The empty string or @c NULL means the root directory of the
- * WIM image. */
+ /** Destination path in the WIM image. Use ::WIMLIB_WIM_ROOT_PATH to
+ * specify the root directory of the WIM image. */
wimlib_tchar *wim_target_path;
/** Reserved; set to 0. */
long reserved;
};
-/** Structure that specifies a list of path patterns. */
-struct wimlib_pattern_list {
- /** Array of patterns. The patterns may be modified by library code,
- * but the @p pats pointer itself will not. See the man page for
- * <b>wimlib-imagex capture</b> for more information about allowed
- * patterns. */
- wimlib_tchar **pats;
-
- /** Number of patterns in the @p pats array. */
- size_t num_pats;
-
- /** Ignored; may be used by the calling code. */
- size_t num_allocated_pats;
-};
-
-/** A structure that contains lists of wildcards that match paths to treat
- * specially when capturing a WIM image. */
-struct wimlib_capture_config {
- /** Paths matching any pattern this list are excluded from being
- * captured, except if the same path appears in @p
- * exclusion_exception_pats. */
- struct wimlib_pattern_list exclusion_pats;
-
- /** Paths matching any pattern in this list are never excluded from
- * being captured. */
- struct wimlib_pattern_list exclusion_exception_pats;
-
- /** Reserved for future capture configuration options. */
- struct wimlib_pattern_list reserved1;
-
- /** Reserved for future capture configuration options. */
- struct wimlib_pattern_list reserved2;
-
- /** Library internal use only. */
- wimlib_tchar *_prefix;
-
- /** Library internal use only. */
- size_t _prefix_num_tchars;
-};
-
/** Set or unset the WIM header flag that marks it read-only
* (WIM_HDR_FLAG_READONLY in Microsoft's documentation), based on the
* ::wimlib_wim_info.is_marked_readonly member of the @p info parameter. This
* reparse-point fixups by default when capturing or applying WIM images. */
#define WIMLIB_CHANGE_RPFIX_FLAG 0x00000008
+/** @} */
+
+/** @addtogroup G_wim_information */
+
+/** @{ */
+
/** General information about a WIM file. */
struct wimlib_wim_info {
/** Chunk size used for compression. */
uint32_t chunk_size;
- /** 1-based index of this part within a split WIM, or 1 if the WIM is
- * standalone. */
+ /** For split WIMs, the 1-based index of this part within the split WIM;
+ * otherwise 1. */
uint16_t part_number;
- /** Total number of parts in the split WIM, or 1 if the WIM is
- * standalone. */
+ /** For split WIMs, the total number of parts in the split WIM;
+ * otherwise 1. */
uint16_t total_parts;
/** One of the ::wimlib_compression_type values that specifies the
/** 1 if the WIM is considered readonly for any reason. */
uint32_t is_readonly : 1;
- /** 1 if reparse-point fixups are supposedly enabled for one or more
- * images in the WIM. */
+ /** 1 if reparse-point fixups are enabled for one or more images in the
+ * WIM. */
uint32_t has_rpfix : 1;
- /** 1 if the WIM is marked as read-only. */
+ /** 1 if the WIM is marked read-only. */
uint32_t is_marked_readonly : 1;
/** 1 if the WIM is part of a spanned set. */
uint32_t reserved[9];
};
-/** Information about a unique resource in the WIM file.
- */
+/** Information about a unique stream in the WIM file. (A stream is the same
+ * thing as a "resource", except in the case of packed resources.) */
struct wimlib_resource_entry {
- /** Uncompressed size of the resource in bytes. */
+ /** Uncompressed size of the stream in bytes. */
uint64_t uncompressed_size;
- /** Compressed size of the resource in bytes. This will be the same as
- * @p uncompressed_size if the resource is uncompressed. */
+ /** Compressed size of the stream in bytes. This will be the same as @p
+ * uncompressed_size if the stream is uncompressed. Or, if @p packed is
+ * 1, this will be 0. */
uint64_t compressed_size;
- /** Offset, in bytes, of this resource from the start of the WIM file.
+ /** Offset, in bytes, of this stream from the start of the WIM file. Or
+ * if @p packed is 1, then this is actually the offset at which this
+ * stream begins in the uncompressed contents of the packed resource.
*/
uint64_t offset;
- /** SHA1 message digest of the resource's uncompressed contents. */
+ /** SHA1 message digest of the stream's uncompressed contents. */
uint8_t sha1_hash[20];
- /** Which part number of the split WIM this resource is in. This should
- * be the same as the part number provided by wimlib_get_wim_info(). */
+ /** Which part of WIM this stream is in. */
uint32_t part_number;
- /** Number of times this resource is referenced over all WIM images. */
+ /** Number of times this stream is referenced over all WIM images. */
uint32_t reference_count;
- /** 1 if this resource is compressed. */
+ /** 1 if this stream is compressed. */
uint32_t is_compressed : 1;
- /** 1 if this resource is a metadata resource rather than a file
- * resource. */
+ /** 1 if this stream is a metadata resource rather than a file resource.
+ * */
uint32_t is_metadata : 1;
uint32_t is_free : 1;
uint32_t is_spanned : 1;
- uint32_t reserved_flags : 28;
- uint64_t reserved[4];
+
+ /** 1 if this stream was not found in the lookup table of the
+ * ::WIMStruct. This normally implies a missing call to
+ * wimlib_reference_resource_files() or wimlib_reference_resources().
+ * */
+ uint32_t is_missing : 1;
+
+ /** 1 if this stream is located in a packed resource which may contain
+ * other streams (all compressed together) as well. */
+ uint32_t packed : 1;
+
+ uint32_t reserved_flags : 26;
+
+ /** If @p packed is 1, then this will specify the offset of the packed
+ * resource in the WIM. */
+ uint64_t raw_resource_offset_in_wim;
+
+ /** If @p packed is 1, then this will specify the compressed size of the
+ * packed resource in the WIM. */
+ uint64_t raw_resource_compressed_size;
+
+ uint64_t reserved[2];
};
-/** A stream of a file in the WIM. */
+/**
+ * Information about a stream of a particular file in the WIM.
+ *
+ * Normally, only WIM images captured from NTFS filesystems will have multiple
+ * streams per file. In practice, this is a rarely used feature of the
+ * filesystem.
+ */
struct wimlib_stream_entry {
/** Name of the stream, or NULL if the stream is unnamed. */
const wimlib_tchar *stream_name;
- /** Location, size, etc. of the stream within the WIM file. */
+ /** Location, size, and other information about the stream's data as
+ * stored in the WIM file. */
struct wimlib_resource_entry resource;
uint64_t reserved[4];
};
* entry ("dentry") because hard links are allowed. The hard_link_group_id
* field can be used to distinguish actual file inodes. */
struct wimlib_dir_entry {
- /** Name of the file, or NULL if this file is unnamed (only possible for
- * the root directory) */
+ /** Name of the file, or NULL if this file is unnamed. Only the root
+ * directory of an image will be unnamed. */
const wimlib_tchar *filename;
- /** 8.3 DOS name of this file, or NULL if this file has no such name.
- * */
+ /** 8.3 name (or "DOS name", or "short name") of this file; or NULL if
+ * this file has no such name. */
const wimlib_tchar *dos_name;
- /** Full path to this file within the WIM image. */
+ /** Full path to this file within the WIM image. Path separators will
+ * be ::WIMLIB_WIM_PATH_SEPARATOR. */
const wimlib_tchar *full_path;
/** Depth of this directory entry, where 0 is the root, 1 is the root's
#define WIMLIB_REPARSE_TAG_DFS 0x8000000A
#define WIMLIB_REPARSE_TAG_DFSR 0x80000012
#define WIMLIB_REPARSE_TAG_FILTER_MANAGER 0x8000000B
+#define WIMLIB_REPARSE_TAG_WOF 0x80000017
#define WIMLIB_REPARSE_TAG_SYMLINK 0xA000000C
- /** If the file is a reparse point (FILE_ATTRIBUTE_DIRECTORY set in the
- * attributes), this will give the reparse tag. This tells you whether
- * the reparse point is a symbolic link, junction point, or some other,
- * more unusual kind of reparse point. */
+ /** If the file is a reparse point (FILE_ATTRIBUTE_REPARSE_POINT set in
+ * the attributes), this will give the reparse tag. This tells you
+ * whether the reparse point is a symbolic link, junction point, or some
+ * other, more unusual kind of reparse point. */
uint32_t reparse_tag;
- /* Number of (hard) links to this file. */
+ /** Number of links to this file's inode (hard links).
+ *
+ * Currently, this will always be 1 for directories. However, it can be
+ * greater than 1 for nondirectory files. */
uint32_t num_links;
- /** Number of named data streams that this file has. Normally 0. */
+ /** Number of named data streams this file has. Normally 0. */
uint32_t num_named_streams;
- /** Roughly, the inode number of this file. However, it may be 0 if
- * @p num_links == 1. */
+ /** A unique identifier for this file's inode. However, as a special
+ * case, if the inode only has a single link (@p num_links == 1), this
+ * value may be 0.
+ *
+ * Note: if a WIM image is captured from a filesystem, this value is not
+ * guaranteed to be the same as the original number of the inode on the
+ * filesystem. */
uint64_t hard_link_group_id;
/** Time this file was created. */
/** Time this file was last accessed. */
struct timespec last_access_time;
- uint64_t reserved[16];
-
- /** Array of streams that make up this file. The first entry will
- * always exist and will correspond to the unnamed data stream (default
- * file contents), so it will have @p stream_name == @c NULL. There
- * will then be @p num_named_streams additional entries that specify the
- * named data streams, if any, each of which will have @p stream_name !=
- * @c NULL. */
+
+ /** The UNIX user ID of this file. This is a wimlib extension.
+ *
+ * This field is only valid if @p unix_mode != 0. */
+ uint32_t unix_uid;
+
+ /** The UNIX group ID of this file. This is a wimlib extension.
+ *
+ * This field is only valid if @p unix_mode != 0. */
+ uint32_t unix_gid;
+
+ /** The UNIX mode of this file. This is a wimlib extension.
+ *
+ * If this field is 0, then @p unix_uid, @p unix_gid, @p unix_mode, and
+ * @p unix_rdev are all unknown (fields are not present in the WIM
+ * image). */
+ uint32_t unix_mode;
+
+ /** The UNIX device ID (major and minor number) of this file. This is a
+ * wimlib extension.
+ *
+ * This field is only valid if @p unix_mode != 0. */
+ uint32_t unix_rdev;
+
+ uint64_t reserved[14];
+
+ /**
+ * Array of streams that make up this file.
+ *
+ * The first entry will always exist and will correspond to the unnamed
+ * data stream (default file contents), so it will have <c>stream_name
+ * == NULL</c>. Alternatively, for reparse point files, the first entry
+ * will corresponding to the reparse data stream.
+ *
+ * Then, following the first entry, there be @p num_named_streams
+ * additional entries that specify the named data streams, if any, each
+ * of which will have <c>stream_name != NULL</c>.
+ */
struct wimlib_stream_entry streams[];
};
typedef int (*wimlib_iterate_lookup_table_callback_t)(const struct wimlib_resource_entry *resource,
void *user_ctx);
-/**
- * @name Directory tree iteration flags
- *
- * The following flags can be passed to wimlib_iterate_dir_tree().
- *
- * @{
- */
-
/** For wimlib_iterate_dir_tree(): Iterate recursively on children rather than
* just on the specified path. */
#define WIMLIB_ITERATE_DIR_TREE_FLAG_RECURSIVE 0x00000001
* itself; only its children (in the case of a non-empty directory) */
#define WIMLIB_ITERATE_DIR_TREE_FLAG_CHILDREN 0x00000002
+/** Return ::WIMLIB_ERR_RESOURCE_NOT_FOUND if any resources needed to fill in
+ * the ::wimlib_resource_entry's for the iteration cannot be found in the lookup
+ * table of the ::WIMStruct. The default behavior without this flag is to fill
+ * in the SHA1 message digest of the ::wimlib_resource_entry and set the @ref
+ * wimlib_resource_entry::is_missing "is_missing" flag. */
+#define WIMLIB_ITERATE_DIR_TREE_FLAG_RESOURCES_NEEDED 0x00000004
-/**
- * @name Add flags
+/** @} */
+/** @addtogroup G_modifying_wims
+ * @{ */
+
+/** UNIX-like systems only: Directly capture an NTFS volume rather than a
+ * generic directory. This requires that wimlib was compiled with support for
+ * libntfs-3g.
*
- * The following flags can be passed to wimlib_add_image(),
- * wimlib_add_image_multisource(), and add commands passed to
- * wimlib_update_image().
+ * This flag cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
+ * ::WIMLIB_ADD_FLAG_UNIX_DATA.
*
- * @{
- */
-
-/** Directly capture a NTFS volume rather than a generic directory. This flag
- * cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
- * ::WIMLIB_ADD_FLAG_UNIX_DATA. */
+ * Do not use this flag on Windows, where wimlib already supports all
+ * Windows-native filesystems, including NTFS, through the Windows APIs. */
#define WIMLIB_ADD_FLAG_NTFS 0x00000001
-/** Follow symlinks; archive and dump the files they point to. Cannot be used
- * with ::WIMLIB_ADD_FLAG_NTFS. */
+/** Follow symbolic links when scanning the directory tree. Currently only
+ * supported on UNIX-like systems. */
#define WIMLIB_ADD_FLAG_DEREFERENCE 0x00000002
/** Call the progress function with the message
- * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file is starting to
- * be scanned, or when a directory or file is being excluded from capture. */
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file has been
+ * scanned. */
#define WIMLIB_ADD_FLAG_VERBOSE 0x00000004
-/** Mark the image being added as the bootable image of the WIM. */
+/** Mark the image being added as the bootable image of the WIM. This flag is
+ * valid only for wimlib_add_image() and wimlib_add_image_multisource().
+ *
+ * Note that you can also change the bootable image of a WIM using
+ * wimlib_set_wim_info().
+ *
+ * Note: ::WIMLIB_ADD_FLAG_BOOT does something different from, and independent
+ * from, ::WIMLIB_ADD_FLAG_WIMBOOT. */
#define WIMLIB_ADD_FLAG_BOOT 0x00000008
-/** Store the UNIX owner, group, and mode. This is done by adding a special
- * alternate data stream to each regular file, symbolic link, and directory to
- * contain this information. Please note that this flag is for convenience
- * only; Microsoft's @a imagex.exe will not understand this special information.
- * This flag cannot be combined with ::WIMLIB_ADD_FLAG_NTFS. */
+/** UNIX-like systems only: Store the UNIX owner, group, mode, and device ID
+ * (major and minor number) of each file. Also allows capturing special files
+ * such as device nodes and FIFOs. See the documentation for the
+ * <b>--unix-data</b> option to <b>wimlib-imagex capture</b> for more
+ * information. */
#define WIMLIB_ADD_FLAG_UNIX_DATA 0x00000010
/** Do not capture security descriptors. Only has an effect in NTFS capture
- * mode, or in Win32 native builds. */
+ * mode, or in Windows native builds. */
#define WIMLIB_ADD_FLAG_NO_ACLS 0x00000020
/** Fail immediately if the full security descriptor of any file or directory
- * cannot be accessed. Only has an effect in Win32 native builds. The default
- * behavior without this flag is to first try omitting the SACL from the
+ * cannot be accessed. Only has an effect in Windows native builds. The
+ * default behavior without this flag is to first try omitting the SACL from the
* security descriptor, then to try omitting the security descriptor entirely.
- * */
+ */
#define WIMLIB_ADD_FLAG_STRICT_ACLS 0x00000040
/** Call the progress function with the message
* ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when a directory or file is excluded from
* capture. This is a subset of the messages provided by
- * ::WIMLIB_ADD_FLAG_VERBOSE. */
+ * ::WIMLIB_ADD_FLAG_VERBOSE. */
#define WIMLIB_ADD_FLAG_EXCLUDE_VERBOSE 0x00000080
-/** Reparse-point fixups: Modify absolute symbolic links (or junction points,
- * in the case of Windows) that point inside the directory being captured to
- * instead be absolute relative to the directory being captured, rather than the
- * current root; also exclude absolute symbolic links that point outside the
- * directory tree being captured.
+/** Reparse-point fixups: Modify absolute symbolic links (and junctions, in the
+ * case of Windows) that point inside the directory being captured to instead be
+ * absolute relative to the directory being captured.
*
- * Without this flag, the default is to do this if WIM_HDR_FLAG_RP_FIX is set in
- * the WIM header or if this is the first image being added.
- * WIM_HDR_FLAG_RP_FIX is set if the first image in a WIM is captured with
- * reparse point fixups enabled and currently cannot be unset. */
+ * Without this flag, the default is to do reparse-point fixups if
+ * WIM_HDR_FLAG_RP_FIX is set in the WIM header or if this is the first image
+ * being added. WIM_HDR_FLAG_RP_FIX is set if the first image in a WIM is
+ * captured with reparse point fixups enabled and currently cannot be unset. */
#define WIMLIB_ADD_FLAG_RPFIX 0x00000100
-/** Don't do reparse point fixups. The default behavior is described in the
- * documentation for ::WIMLIB_ADD_FLAG_RPFIX. */
+/** Don't do reparse point fixups. See ::WIMLIB_ADD_FLAG_RPFIX. */
#define WIMLIB_ADD_FLAG_NORPFIX 0x00000200
/** Do not automatically exclude unsupported files or directories from capture;
- * e.g. encrypted directories in NTFS-3g capture mode, or device files and FIFOs
- * on UNIX-like systems. Instead, fail with ::WIMLIB_ERR_UNSUPPORTED_FILE when
- * such a file is encountered. */
+ * e.g. encrypted files in NTFS-3g capture mode, or device files and FIFOs on
+ * UNIX-like systems when not also using ::WIMLIB_ADD_FLAG_UNIX_DATA. Instead,
+ * fail with ::WIMLIB_ERR_UNSUPPORTED_FILE when such a file is encountered. */
#define WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE 0x00000400
-/** Automatically select a capture configuration appropriate for capturing
- * filesystems containing Windows operating systems. When this flag is
- * specified, the corresponding @p config parameter or member must be @c NULL.
- *
- * Currently, selecting this capture configuration will cause the following
- * files and directories to be excluded from capture:
- *
- * - "\$ntfs.log"
- * - "\hiberfil.sys"
- * - "\pagefile.sys"
- * - "\System Volume Information"
- * - "\RECYCLER"
- * - "\Windows\CSC"
- *
- * Note that the default behavior--- that is, when this flag is not specified
- * and @p config is @c NULL--- is to use no capture configuration, meaning that
- * no files are excluded from capture.
+/**
+ * Automatically select a capture configuration appropriate for capturing
+ * filesystems containing Windows operating systems. For example,
+ * "/pagefile.sys" and "System Volume Information" will be excluded.
+ *
+ * When this flag is specified, the corresponding @p config parameter (for
+ * wimlib_add_image()) or member (for wimlib_update_image()) must be @c NULL.
+ * Otherwise, ::WIMLIB_ERR_INVALID_PARAM will be returned.
+ *
+ * Note that the default behavior--- that is, when neither
+ * ::WIMLIB_ADD_FLAG_WINCONFIG nor ::WIMLIB_ADD_FLAG_WIMBOOT is specified and @p
+ * config is @c NULL--- is to use no capture configuration, meaning that no
+ * files are excluded from capture.
*/
#define WIMLIB_ADD_FLAG_WINCONFIG 0x00000800
+/**
+ * Capture image as WIMBoot compatible. In addition, if no capture
+ * configuration file is explicitly specified use the capture configuration file
+ * <c>$SOURCE/Windows/System32/WimBootCompress.ini</c> if it exists, where
+ * <c>$SOURCE</c> is the directory being captured; or, if a capture
+ * configuration file is explicitly specified, use it and also place it at
+ * /Windows/System32/WimBootCompress.ini in the WIM image.
+ *
+ * Note: this will not by itself change the compression type. Before writing
+ * the WIM file, it's recommended to also do:
+ *
+ * \code
+ * wimlib_set_output_compression_type(wim, WIMLIB_COMPRESSION_TYPE_XPRESS);
+ * wimlib_set_output_chunk_size(wim, 4096);
+ * \endcode
+ *
+ * since that makes access to the data faster (at the cost of a worse
+ * compression ratio compared to the 32768-byte LZX chunks usually used).
+ *
+ * Note: ::WIMLIB_ADD_FLAG_WIMBOOT does something different from, and
+ * independent from, ::WIMLIB_ADD_FLAG_BOOT.
+ */
+#define WIMLIB_ADD_FLAG_WIMBOOT 0x00001000
+
+/**
+ * If the add command involves adding a non-directory file to a location at
+ * which there already exists a nondirectory file in the WIM image, issue
+ * ::WIMLIB_ERR_INVALID_OVERLAY instead of replacing the file. This only has an
+ * effect when updating an existing image with wimlib_update_image().
+ * This was the default behavior in wimlib v1.6.2 and earlier.
+ */
+#define WIMLIB_ADD_FLAG_NO_REPLACE 0x00002000
+
+/**
+ * Send ::WIMLIB_PROGRESS_MSG_TEST_FILE_EXCLUSION messages to the progress
+ * function.
+ *
+ * Note: This method for file exclusions is independent from the capture
+ * configuration file mechanism.
+ */
+#define WIMLIB_ADD_FLAG_TEST_FILE_EXCLUSION 0x00004000
+
#define WIMLIB_ADD_IMAGE_FLAG_NTFS WIMLIB_ADD_FLAG_NTFS
#define WIMLIB_ADD_IMAGE_FLAG_DEREFERENCE WIMLIB_ADD_FLAG_DEREFERENCE
#define WIMLIB_ADD_IMAGE_FLAG_VERBOSE WIMLIB_ADD_FLAG_VERBOSE
#define WIMLIB_ADD_IMAGE_FLAG_NO_UNSUPPORTED_EXCLUDE \
WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE
#define WIMLIB_ADD_IMAGE_FLAG_WINCONFIG WIMLIB_ADD_FLAG_WINCONFIG
+#define WIMLIB_ADD_IMAGE_FLAG_WIMBOOT WIMLIB_ADD_FLAG_WIMBOOT
-/**
- * @name Delete flags
- *
- * The following flags can be specified in delete commands passed to
- * wimlib_update_image().
- *
- * @{
- */
+
+/** @} */
+/** @addtogroup G_modifying_wims
+ * @{ */
/** Do not issue an error if the path to delete does not exist. */
#define WIMLIB_DELETE_FLAG_FORCE 0x00000001
* issued if the path to delete is a directory. */
#define WIMLIB_DELETE_FLAG_RECURSIVE 0x00000002
-/**
- * @name Export flags
- *
- * The following flags can be passed to wimlib_export_image().
- *
- * @{
- */
+/** @} */
+/** @addtogroup G_modifying_wims
+ * @{ */
/**
* If a single image is being exported, mark it bootable in the destination WIM.
/** Give the exported image(s) no descriptions. */
#define WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS 0x00000004
+/** This advises the library that the program is finished with the source
+ * WIMStruct and will not attempt to access it after the call to
+ * wimlib_export_image(), with the exception of the call to wimlib_free(). */
+#define WIMLIB_EXPORT_FLAG_GIFT 0x00000008
+
/**
- * @name Extract flags
- *
- * The following flags can be passed to wimlib_extract_image(),
- * wimlib_extract_files(), and wimlib_extract_image_from_pipe().
- *
- * @{
+ * Mark each exported image as WIMBoot-compatible.
+ *
+ * Note: by itself, this does change the destination WIM's compression type, nor
+ * does it add the file @c \\Windows\\System32\\WimBootCompress.ini in the WIM
+ * image. Before writing the destination WIM, it's recommended to do something
+ * like:
+ *
+ * \code
+ * wimlib_set_output_compression_type(wim, WIMLIB_COMPRESSION_TYPE_XPRESS);
+ * wimlib_set_output_chunk_size(wim, 4096);
+ * wimlib_add_tree(wim, image, L"myconfig.ini",
+ * L"\\Windows\\System32\\WimBootCompress.ini", 0);
+ * \endcode
*/
+#define WIMLIB_EXPORT_FLAG_WIMBOOT 0x00000010
+
+/** @} */
+/** @addtogroup G_extracting_wims
+ * @{ */
-/** Extract the image directly to a NTFS volume rather than a generic directory.
+/** Extract the image directly to an NTFS volume rather than a generic directory.
* This mode is only available if wimlib was compiled with libntfs-3g support;
* if not, ::WIMLIB_ERR_UNSUPPORTED will be returned. In this mode, the
- * extraction target will be interpreted as the path to a NTFS volume image (as
+ * extraction target will be interpreted as the path to an NTFS volume image (as
* a regular file or block device) rather than a directory. It will be opened
* using libntfs-3g, and the image will be extracted to the NTFS filesystem's
* root directory. Note: this flag cannot be used when wimlib_extract_image()
- * is called with ::WIMLIB_ALL_IMAGES as the @p image. */
+ * is called with ::WIMLIB_ALL_IMAGES as the @p image, nor can it be used with
+ * wimlib_extract_paths() when passed multiple paths. */
#define WIMLIB_EXTRACT_FLAG_NTFS 0x00000001
-/** When identical files are extracted from the WIM, always hard link them
- * together. */
-#define WIMLIB_EXTRACT_FLAG_HARDLINK 0x00000002
-
-/** When identical files are extracted from the WIM, always symlink them
- * together. */
-#define WIMLIB_EXTRACT_FLAG_SYMLINK 0x00000004
-
-/** This flag no longer does anything but is reserved for future use. */
-#define WIMLIB_EXTRACT_FLAG_VERBOSE 0x00000008
-
-/** Read the WIM file sequentially while extracting the image. */
-#define WIMLIB_EXTRACT_FLAG_SEQUENTIAL 0x00000010
-
-/** Extract special UNIX data captured with ::WIMLIB_ADD_FLAG_UNIX_DATA. Only
- * valid on UNIX-like platforms, and when ::WIMLIB_EXTRACT_FLAG_NTFS was not
- * specified. */
+/** UNIX-like systems only: Extract special UNIX data captured with
+ * ::WIMLIB_ADD_FLAG_UNIX_DATA. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS. */
#define WIMLIB_EXTRACT_FLAG_UNIX_DATA 0x00000020
-/** Do not extract security descriptors. */
+/** Do not extract security descriptors. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS. */
#define WIMLIB_EXTRACT_FLAG_NO_ACLS 0x00000040
/** Fail immediately if the full security descriptor of any file or directory
* cannot be set exactly as specified in the WIM file. On Windows, the default
- * behavior without this flag is to fall back to setting the security descriptor
- * with the SACL omitted, then only the default inherited security descriptor,
- * if we do not have permission to set the desired one. */
+ * behavior without this flag when wimlib does not have permission to set the
+ * correct security descriptor is to fall back to setting the security
+ * descriptor with the SACL omitted, then with the DACL omitted, then with the
+ * owner omitted, then not at all. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_NO_ACLS. */
#define WIMLIB_EXTRACT_FLAG_STRICT_ACLS 0x00000080
/** This is the extraction equivalent to ::WIMLIB_ADD_FLAG_RPFIX. This forces
* reparse-point fixups on, so absolute symbolic links or junction points will
- * be fixed to be absolute relative to the actual extraction root. Reparse
- * point fixups are done by default if WIM_HDR_FLAG_RP_FIX is set in the WIM
- * header. This flag may only be specified when extracting a full image (not a
- * file or directory tree within one). */
+ * be fixed to be absolute relative to the actual extraction root. Reparse-
+ * point fixups are done by default for wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe() if WIM_HDR_FLAG_RP_FIX is set in the WIM
+ * header. This flag cannot be combined with ::WIMLIB_EXTRACT_FLAG_NORPFIX. */
#define WIMLIB_EXTRACT_FLAG_RPFIX 0x00000100
/** Force reparse-point fixups on extraction off, regardless of the state of the
- * WIM_HDR_FLAG_RP_FIX flag in the WIM header. */
+ * WIM_HDR_FLAG_RP_FIX flag in the WIM header. This flag cannot be combined
+ * with ::WIMLIB_EXTRACT_FLAG_RPFIX. */
#define WIMLIB_EXTRACT_FLAG_NORPFIX 0x00000200
-/** Extract the specified file to standard output. This is only valid in an
- * extraction command that specifies the extraction of a regular file in the WIM
- * image. */
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Extract the
+ * paths, each of which must name a regular file, to standard output. */
#define WIMLIB_EXTRACT_FLAG_TO_STDOUT 0x00000400
/** Instead of ignoring files and directories with names that cannot be
* represented on the current platform (note: Windows has more restrictions on
* filenames than POSIX-compliant systems), try to replace characters or append
- * junk to the names so that they can be extracted in some form. */
+ * junk to the names so that they can be extracted in some form.
+ *
+ * Note: this flag is unlikely to have any effect when extracting a WIM image
+ * that was captured on Windows.
+ */
#define WIMLIB_EXTRACT_FLAG_REPLACE_INVALID_FILENAMES 0x00000800
/** On Windows, when there exist two or more files with the same case
* insensitive name but different case sensitive names, try to extract them all
* by appending junk to the end of them, rather than arbitrarily extracting only
- * one. */
+ * one.
+ *
+ * Note: this flag is unlikely to have any effect when extracting a WIM image
+ * that was captured on Windows.
+ */
#define WIMLIB_EXTRACT_FLAG_ALL_CASE_CONFLICTS 0x00001000
-/** Do not ignore failure to set timestamps on extracted files. */
+/** Do not ignore failure to set timestamps on extracted files. This flag
+ * currently only has an effect when extracting to a directory on UNIX-like
+ * systems. */
#define WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS 0x00002000
-/** Do not ignore failure to set short names on extracted files. */
+/** Do not ignore failure to set short names on extracted files. This flag
+ * currently only has an effect on Windows. */
#define WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES 0x00004000
-/** Do not ignore failure to extract symbolic links (and junction points, on
- * Windows) due to permissions problems. By default, such failures are ignored
- * since the default configuration of Windows only allows the Administrator to
- * create symbolic links. */
+/** Do not ignore failure to extract symbolic links and junctions due to
+ * permissions problems. This flag currently only has an effect on Windows. By
+ * default, such failures are ignored since the default configuration of Windows
+ * only allows the Administrator to create symbolic links. */
#define WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS 0x00008000
-/** TODO: this flag is intended to allow resuming an aborted extraction, but the
- * behavior is currently less than satisfactory. Do not use (yet). */
+/** Reserved for future use. */
#define WIMLIB_EXTRACT_FLAG_RESUME 0x00010000
-/**
- * @name Mount flags
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Treat the
+ * paths to extract as wildcard patterns ("globs") which may contain the
+ * wildcard characters @c ? and @c *. The @c ? character matches any
+ * non-path-separator character, whereas the @c * character matches zero or more
+ * non-path-separator characters. Consequently, each glob may match zero or
+ * more actual paths in the WIM image.
*
- * The following flags can be passed to wimlib_mount_image().
+ * By default, if a glob does not match any files, a warning but not an error
+ * will be issued. This is the case even if the glob did not actually contain
+ * wildcard characters. Use ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB to get an error
+ * instead.
+ * */
+#define WIMLIB_EXTRACT_FLAG_GLOB_PATHS 0x00040000
+
+/** In combination with ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS, causes an error
+ * (::WIMLIB_ERR_PATH_DOES_NOT_EXIST) rather than a warning to be issued when
+ * one of the provided globs did not match a file. */
+#define WIMLIB_EXTRACT_FLAG_STRICT_GLOB 0x00080000
+
+/** Do not extract Windows file attributes such as readonly, hidden, etc.
*
- * @{
+ * This flag has an effect on Windows as well as in the NTFS-3g extraction mode.
*/
+#define WIMLIB_EXTRACT_FLAG_NO_ATTRIBUTES 0x00100000
+
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Do not
+ * preserve the directory structure of the archive when extracting --- that is,
+ * place each extracted file or directory tree directly in the target directory.
+ *
+ * The target directory will still be created if it does not already exist. */
+#define WIMLIB_EXTRACT_FLAG_NO_PRESERVE_DIR_STRUCTURE 0x00200000
+
+/** Windows only: Extract files as "pointers" back to the WIM archive.
+ *
+ * The effects of this option are fairly complex. See the documentation for the
+ * <b>--wimboot</b> option of <b>wimlib-imagex apply</b> for more information.
+ */
+#define WIMLIB_EXTRACT_FLAG_WIMBOOT 0x00400000
+
+/** @} */
+/** @addtogroup G_mounting_wim_images
+ * @{ */
/** Mount the WIM image read-write rather than the default of read-only. */
#define WIMLIB_MOUNT_FLAG_READWRITE 0x00000001
-/** Enable FUSE debugging by passing the @c -d flag to @c fuse_main().*/
+/** Enable FUSE debugging by passing the @c -d option to @c fuse_main(). */
#define WIMLIB_MOUNT_FLAG_DEBUG 0x00000002
-/** Do not allow accessing alternate data streams in the mounted WIM image. */
+/** Do not allow accessing named data streams in the mounted WIM image. */
#define WIMLIB_MOUNT_FLAG_STREAM_INTERFACE_NONE 0x00000004
-/** Access alternate data streams in the mounted WIM image through extended file
- * attributes. This is the default mode. */
+/** Access named data streams in the mounted WIM image through extended file
+ * attributes named "user.X", where X is the name of a data stream. This is the
+ * default mode. */
#define WIMLIB_MOUNT_FLAG_STREAM_INTERFACE_XATTR 0x00000008
-/** Access alternate data streams in the mounted WIM image by specifying the
- * file name, a colon, then the alternate file stream name. */
+/** Access named data streams in the mounted WIM image by specifying the file
+ * name, a colon, then the name of the data stream. */
#define WIMLIB_MOUNT_FLAG_STREAM_INTERFACE_WINDOWS 0x00000010
-/** Use UNIX file owners, groups, and modes if available in the WIM (see
- * ::WIMLIB_ADD_FLAG_UNIX_DATA). */
+/** Use UNIX metadata if available in the WIM image. See
+ * ::WIMLIB_ADD_FLAG_UNIX_DATA. */
#define WIMLIB_MOUNT_FLAG_UNIX_DATA 0x00000020
-/** Allow other users to see the mounted filesystem. (this passes the @c
- * allow_other option to FUSE mount) */
+/** Allow other users to see the mounted filesystem. This passes the @c
+ * allow_other option to fuse_main(). */
#define WIMLIB_MOUNT_FLAG_ALLOW_OTHER 0x00000040
-/**
- * @name Open flags
- *
- * The following flags can be passed to wimlib_open_wim() and several other
- * functions such as wimlib_join().
- * @{
- */
+/** @} */
+/** @addtogroup G_creating_and_opening_wims
+ * @{ */
/** Verify the WIM contents against the WIM's integrity table, if present. This
* causes the raw data of the WIM file, divided into 10 MB chunks, to be
* checksummed and checked against the SHA1 message digests specified in the
- * integrity table. ::WIMLIB_ERR_INTEGRITY is returned if there are any
- * mismatches (or, ::WIMLIB_ERR_INVALID_INTEGRITY_TABLE is returned if the
- * integrity table is invalid). */
+ * integrity table. If there are any mismatches, ::WIMLIB_ERR_INTEGRITY is
+ * issued. If the WIM file does not contain an integrity table, this flag has
+ * no effect. */
#define WIMLIB_OPEN_FLAG_CHECK_INTEGRITY 0x00000001
-/** Do not issue an error if the WIM is part of a split WIM. Programs must
- * specify this flag if they intend to open part of a split WIM, rather than
- * only supporting standalone WIMs. */
-#define WIMLIB_OPEN_FLAG_SPLIT_OK 0x00000002
-
-/** Check if the WIM is writable and return ::WIMLIB_ERR_WIM_IS_READONLY if it
- * is not. A WIM is considered writable only if it is writable at the
- * filesystem level, does not have the WIM_HDR_FLAG_READONLY flag set in its
- * header, and is not part of a spanned set. It is not required to provide this
- * flag before attempting to make changes to the WIM, but with this flag you get
- * an error sooner rather than later. */
+/** Issue an error (::WIMLIB_ERR_IS_SPLIT_WIM) if the WIM is part of a split
+ * WIM. Software can provide this flag for convenience if it explicitly does
+ * not want to support split WIMs. */
+#define WIMLIB_OPEN_FLAG_ERROR_IF_SPLIT 0x00000002
+
+/** Check if the WIM is writable and issue an error
+ * (::WIMLIB_ERR_WIM_IS_READONLY) if it is not. A WIM is considered writable
+ * only if it is writable at the filesystem level, does not have the
+ * WIM_HDR_FLAG_READONLY flag set in its header, and is not part of a spanned
+ * set. It is not required to provide this flag before attempting to make
+ * changes to the WIM, but with this flag you get an error sooner rather than
+ * later. */
#define WIMLIB_OPEN_FLAG_WRITE_ACCESS 0x00000004
-/**
- * @name Unmount flags
- *
- * The following flags can be passed to wimlib_unmount_image().
- * @{
- */
+/** @} */
+/** @addtogroup G_mounting_wim_images
+ * @{ */
-/** See ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
+/** Provide ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY when committing the WIM image.
+ * Ignored if ::WIMLIB_UNMOUNT_FLAG_COMMIT not also specified. */
#define WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY 0x00000001
-/** Unless this flag is given, changes to a read-write mounted WIM are
- * discarded. Ignored for read-only mounts. */
+/** Commit changes to the read-write mounted WIM image.
+ * If this flag is not specified, changes will be discarded. */
#define WIMLIB_UNMOUNT_FLAG_COMMIT 0x00000002
-/** See ::WIMLIB_WRITE_FLAG_REBUILD. */
+/** Provide ::WIMLIB_WRITE_FLAG_REBUILD when committing the WIM image.
+ * Ignored if ::WIMLIB_UNMOUNT_FLAG_COMMIT not also specified. */
#define WIMLIB_UNMOUNT_FLAG_REBUILD 0x00000004
-/** See ::WIMLIB_WRITE_FLAG_RECOMPRESS */
+/** Provide ::WIMLIB_WRITE_FLAG_RECOMPRESS when committing the WIM image.
+ * Ignored if ::WIMLIB_UNMOUNT_FLAG_COMMIT not also specified. */
#define WIMLIB_UNMOUNT_FLAG_RECOMPRESS 0x00000008
-/** Do a "lazy" unmount (detach filesystem immediately, even if busy). */
-#define WIMLIB_UNMOUNT_FLAG_LAZY 0x00000010
-
/**
- * @name Update flags
+ * In combination with ::WIMLIB_UNMOUNT_FLAG_COMMIT for a read-write mounted WIM
+ * image, forces all file descriptors to the open WIM image to be closed before
+ * committing it.
*
- * The following flags can be passed to wimlib_update_image().
- * @{
+ * Without ::WIMLIB_UNMOUNT_FLAG_COMMIT or with a read-only mounted WIM image,
+ * this flag has no effect.
*/
+#define WIMLIB_UNMOUNT_FLAG_FORCE 0x00000010
+
+/** In combination with ::WIMLIB_UNMOUNT_FLAG_COMMIT for a read-write mounted
+ * WIM image, causes the modified image to be committed to the WIM file as a
+ * new, unnamed image appended to the archive. The original image in the WIM
+ * file will be unmodified. */
+#define WIMLIB_UNMOUNT_FLAG_NEW_IMAGE 0x00000020
+
+/** @} */
+/** @addtogroup G_modifying_wims
+ * @{ */
/** Send ::WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND and
* ::WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND messages. */
#define WIMLIB_UPDATE_FLAG_SEND_PROGRESS 0x00000001
+/** @} */
+/** @addtogroup G_writing_and_overwriting_wims
+ * @{ */
+
/**
- * @name Write flags
+ * Include an integrity table in the resulting WIM file.
*
- * The following flags can be passed to wimlib_write(), wimlib_overwrite(),
- * wimlib_write_to_fd(), and several other functions such as wimlib_join().
- * @{
+ * For ::WIMStruct's created with wimlib_open_wim(), the default behavior is to
+ * include an integrity table if and only if one was present before. For
+ * ::WIMStruct's created with wimlib_create_new_wim(), the default behavior is
+ * to not include an integrity table.
*/
-
-/** Include an integrity table in the WIM.
- *
- * For WIMs created with wimlib_open_wim(), the default behavior is to include
- * an integrity table if and only if one was present before. For WIMs created
- * with wimlib_create_new_wim(), the default behavior is to not include an
- * integrity table. */
#define WIMLIB_WRITE_FLAG_CHECK_INTEGRITY 0x00000001
-/** Do not include an integrity table in the new WIM file. This is the default
- * behavior, unless the WIM already included an integrity table. */
+/**
+ * Do not include an integrity table in the resulting WIM file. This is the
+ * default behavior, unless the ::WIMStruct was created by opening a WIM with an
+ * integrity table.
+ */
#define WIMLIB_WRITE_FLAG_NO_CHECK_INTEGRITY 0x00000002
-/** Write the WIM as "pipable". After writing a WIM with this flag specified,
+/**
+ * Write the WIM as "pipable". After writing a WIM with this flag specified,
* images from it can be applied directly from a pipe using
- * wimlib_extract_image_from_pipe(). See the documentation for the --pipable
- * flag of `wimlib-imagex capture' for more information. Beware: WIMs written
- * with this flag will not be compatible with Microsoft's software.
- *
- * For WIMs created with wimlib_open_wim(), the default behavior is to write the
- * WIM as pipable if and only if it was pipable before. For WIMs created with
- * wimlib_create_new_wim(), the default behavior is to write the WIM as
- * non-pipable. */
+ * wimlib_extract_image_from_pipe(). See the documentation for the
+ * <b>--pipable</b> option of <b>wimlib-imagex capture</b> for more information.
+ * Beware: WIMs written with this flag will not be compatible with Microsoft's
+ * software.
+ *
+ * For ::WIMStruct's created with wimlib_open_wim(), the default behavior is to
+ * write the WIM as pipable if and only if it was pipable before. For
+ * ::WIMStruct's created with wimlib_create_new_wim(), the default behavior is
+ * to write the WIM as non-pipable.
+ */
#define WIMLIB_WRITE_FLAG_PIPABLE 0x00000004
-/** Do not write the WIM as "pipable". This is the default behavior, unless the
- * WIM was pipable already. */
+/**
+ * Do not write the WIM as "pipable". This is the default behavior, unless the
+ * ::WIMStruct was created by opening a pipable WIM.
+ */
#define WIMLIB_WRITE_FLAG_NOT_PIPABLE 0x00000008
-/** Recompress all resources, even if they could otherwise be copied from a
- * different WIM with the same compression type (in the case of
- * wimlib_export_image() being called previously). This flag is also valid in
- * the @p wim_write_flags of wimlib_join(), in which case all resources included
- * in the joined WIM file will be recompressed. */
+/**
+ * When writing streams to the WIM file, recompress them, even if their data is
+ * already available in the desired compressed form (for example, in a WIM file
+ * from which an image has been exported using wimlib_export_image()).
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS can be used to recompress with a higher
+ * compression ratio for the same compression type and chunk size. Simply using
+ * the default compression settings may suffice for this, especially if the WIM
+ * file was created using another program/library that may not use as
+ * sophisticated compression algorithms. Or,
+ * wimlib_set_default_compression_level() can be called beforehand to set an
+ * even higher compression level than the default.
+ *
+ * If the WIM contains solid blocks, then ::WIMLIB_WRITE_FLAG_RECOMPRESS can be
+ * used in combination with ::WIMLIB_WRITE_FLAG_PACK_STREAMS to prevent any
+ * solid blocks from being re-used. Otherwise, solid blocks are re-used
+ * somewhat more liberally than normal compressed blocks.
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS does <b>not</b> cause recompression of streams
+ * that would not otherwise be written. For example, a call to
+ * wimlib_overwrite() with ::WIMLIB_WRITE_FLAG_RECOMPRESS will not, by itself,
+ * cause already-existing streams in the WIM file to be recompressed. To force
+ * the WIM file to be fully rebuilt and recompressed, combine
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS with ::WIMLIB_WRITE_FLAG_REBUILD.
+ */
#define WIMLIB_WRITE_FLAG_RECOMPRESS 0x00000010
-/** Call fsync() just before the WIM file is closed. */
+/**
+ * Immediately before closing the WIM file, sync its data to disk.
+ *
+ * This flag forces the function to wait until the data is safely on disk before
+ * returning success. Otherwise, modern operating systems tend to cache data
+ * for some time (in some cases, 30+ seconds) before actually writing it to
+ * disk, even after reporting to the application that the writes have succeeded.
+ *
+ * wimlib_overwrite() will set this flag automatically if it decides to
+ * overwrite the WIM file via a temporary file instead of in-place. This is
+ * necessary on POSIX systems; it will, for example, avoid problems with delayed
+ * allocation on ext4.
+ */
#define WIMLIB_WRITE_FLAG_FSYNC 0x00000020
-/** wimlib_overwrite() only: Re-build the entire WIM file rather than appending
- * data to it if possible. */
+/**
+ * For wimlib_overwrite(), rebuild the entire WIM file, even if it otherwise
+ * could be updated in-place by appending to it.
+ *
+ * When rebuilding the WIM file, stream reference counts will be recomputed, and
+ * any streams with 0 reference count (e.g. from deleted files or images) will
+ * not be included in the resulting WIM file. This can free up space that is
+ * currently not being used.
+ *
+ * This flag can be combined with ::WIMLIB_WRITE_FLAG_RECOMPRESS to force all
+ * data to be recompressed. Otherwise, compressed data is re-used if possible.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_REBUILD 0x00000040
-/** wimlib_overwrite() only: Specifying this flag overrides the default
- * behavior of wimlib_overwrite() after one or more calls to
- * wimlib_delete_image(), which is to rebuild the entire WIM. With this flag,
- * only minimal changes to correctly remove the image from the WIM will be
- * taken. In particular, all streams will be left alone, even if they are no
- * longer referenced. This is probably not what you want, because almost no
- * space will be saved by deleting an image in this way. */
+/**
+ * For wimlib_overwrite(), override the default behavior after one or more calls
+ * to wimlib_delete_image(), which is to rebuild the entire WIM file. With this
+ * flag, only minimal changes to correctly remove the image from the WIM file
+ * will be taken. In particular, all streams will be retained, even if they are
+ * no longer referenced. This may not be what you want, because no space will
+ * be saved by deleting an image in this way.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_SOFT_DELETE 0x00000080
-/** wimlib_overwrite() only: Allow overwriting the WIM even if the readonly
- * flag is set in the WIM header. This can be used in combination with
- * wimlib_set_wim_info() with the ::WIMLIB_CHANGE_READONLY_FLAG flag to actually
- * set the readonly flag on the on-disk WIM file. */
+/**
+ * For wimlib_overwrite(), allow overwriting the WIM file even if the readonly
+ * flag (WIM_HDR_FLAG_READONLY) is set in the WIM header. This can be used
+ * following a call to wimlib_set_wim_info() with the
+ * ::WIMLIB_CHANGE_READONLY_FLAG flag to actually set the readonly flag on the
+ * on-disk WIM file.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_IGNORE_READONLY_FLAG 0x00000100
-/** Do not include non-metadata resources already present in other WIMs. This
- * flag can be used to write a "delta" WIM after resources from the WIM on which
- * the delta is to be based were referenced with
- * wimlib_reference_resource_files() or wimlib_reference_resources(). */
+/**
+ * Do not include streams already present in other WIMs. This flag can be used
+ * to write a "delta" WIM after resources from the WIM on which the delta is to
+ * be based were referenced with wimlib_reference_resource_files() or
+ * wimlib_reference_resources().
+ */
#define WIMLIB_WRITE_FLAG_SKIP_EXTERNAL_WIMS 0x00000200
-/** Asserts that for writes of all WIM images, all streams needed for the WIM
- * are already present (not in external resource WIMs) and their reference
- * counts are correct, so the code does not need to recalculate which streams
- * are referenced. This is for optimization purposes only, since with this flag
- * specified, the metadata resources may not need to be decompressed and parsed.
- *
- * This flag can be passed to wimlib_write() and wimlib_write_to_fd(), but is
- * already implied for wimlib_overwrite(). */
+/**
+ * Advises the library that for writes of all WIM images, all streams needed for
+ * the WIM are already present (not in external resource WIMs) and their
+ * reference counts are correct, so the code does not need to recalculate which
+ * streams are referenced. This is for optimization purposes only, since with
+ * this flag specified, the metadata resources may not need to be decompressed
+ * and parsed.
+ *
+ * wimlib_overwrite() will set this flag automatically.
+ */
#define WIMLIB_WRITE_FLAG_STREAMS_OK 0x00000400
/**
- * @name Init flags
+ * For wimlib_write(), retain the WIM's GUID instead of generating a new one.
*
- * The following flags can be passed to wimlib_global_init().
- * @{
+ * wimlib_overwrite() sets this by default, since the WIM remains, logically,
+ * the same file.
*/
+#define WIMLIB_WRITE_FLAG_RETAIN_GUID 0x00000800
+
+/**
+ * When writing streams in the resulting WIM file, pack multiple streams into a
+ * single compressed resource instead of compressing them independently. This
+ * is also known as creating a "solid archive". This tends to produce a better
+ * compression ratio at the cost of much slower random access.
+ *
+ * WIM files created with this flag are only compatible with wimlib v1.6.0 or
+ * later, WIMGAPI Windows 8 or later, and DISM Windows 8.1 or later. WIM files
+ * created with this flag use a different version number in their header (3584
+ * instead of 68864) and are also called "ESD files".
+ *
+ * If this flag is passed to wimlib_overwrite(), any new data streams will be
+ * written in solid mode. Use both ::WIMLIB_WRITE_FLAG_REBUILD and
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS to force the entire WIM file be rebuilt with
+ * all streams recompressed in solid mode.
+ *
+ * Currently, new solid blocks will, by default, be written using LZMS
+ * compression with 32 MiB (33554432 byte) chunks. Use
+ * wimlib_set_output_pack_compression_type() and/or
+ * wimlib_set_output_pack_chunk_size() to change this. This is independent of
+ * the WIM's main compression type and chunk size; you can have a WIM that
+ * nominally uses LZX compression and 32768 byte chunks but actually contains
+ * LZMS-compressed solid blocks, for example. However, if including solid
+ * blocks, I suggest that you set the WIM's main compression type to LZMS as
+ * well, either by creating the WIM with
+ * ::wimlib_create_new_wim(::WIMLIB_COMPRESSION_TYPE_LZMS, ...) or by calling
+ * ::wimlib_set_output_compression_type(..., ::WIMLIB_COMPRESSION_TYPE_LZMS).
+ *
+ * This flag will be set by default when writing or overwriting a WIM file that
+ * either already contains packed streams, or has had packed streams exported
+ * into it and the WIM's main compression type is LZMS.
+ */
+#define WIMLIB_WRITE_FLAG_PACK_STREAMS 0x00001000
+
+/**
+ * Send ::WIMLIB_PROGRESS_MSG_DONE_WITH_FILE messages while writing the WIM
+ * file. This is only needed in the unusual case that the library user needs to
+ * know exactly when wimlib has read each file for the last time.
+ */
+#define WIMLIB_WRITE_FLAG_SEND_DONE_WITH_FILE_MESSAGES 0x00002000
+
+/** @} */
+/** @addtogroup G_general
+ * @{ */
/** Assume that strings are represented in UTF-8, even if this is not the
* locale's character encoding. This flag is ignored on Windows, where wimlib
*/
#define WIMLIB_INIT_FLAG_STRICT_APPLY_PRIVILEGES 0x00000008
-/**
- * @name Resource reference flags
- *
- * The following flags can be passed to wimlib_reference_resource_files() and
- * wimlib_reference_resources().
- * @{
- */
+/** Default to interpreting WIM paths case sensitively (default on UNIX-like
+ * systems). */
+#define WIMLIB_INIT_FLAG_DEFAULT_CASE_SENSITIVE 0x00000010
-/** wimlib_reference_resource_files() only: Enable shell-style filename
- * globbing. */
+/** Default to interpreting WIM paths case insensitively (default on Windows).
+ * This does not apply to mounted images. */
+#define WIMLIB_INIT_FLAG_DEFAULT_CASE_INSENSITIVE 0x00000020
+
+/** @} */
+/** @addtogroup G_nonstandalone_wims
+ * @{ */
+
+/** For wimlib_reference_resource_files(), enable shell-style filename globbing.
+ * Ignored by wimlib_reference_resources(). */
#define WIMLIB_REF_FLAG_GLOB_ENABLE 0x00000001
-/** wimlib_reference_resource_files() only: Issue an error
+/** For wimlib_reference_resource_files(), issue an error
* (::WIMLIB_ERR_GLOB_HAD_NO_MATCHES) if a glob did not match any files. The
* default behavior without this flag is to issue no error at that point, but
* then attempt to open the glob as a literal path, which of course will fail
* anyway if no file exists at that path. No effect if
- * ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. */
+ * ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. Ignored by
+ * wimlib_reference_resources(). */
#define WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH 0x00000002
-/**
- * @}
- */
+/** @} */
+/** @addtogroup G_modifying_wims
+ * @{ */
-/** Specification of an update to perform on a WIM image. */
-struct wimlib_update_command {
+/** The specific type of update to perform. */
+enum wimlib_update_op {
+ /** Add a new file or directory tree to the WIM image in a
+ * certain location. */
+ WIMLIB_UPDATE_OP_ADD = 0,
- /** The specific type of update to perform. */
- enum wimlib_update_op {
- /** Add a new file or directory tree to the WIM image in a
- * certain location. */
- WIMLIB_UPDATE_OP_ADD = 0,
+ /** Delete a file or directory tree from the WIM image. */
+ WIMLIB_UPDATE_OP_DELETE,
- /** Delete a file or directory tree from the WIM image. */
- WIMLIB_UPDATE_OP_DELETE,
+ /** Rename a file or directory tree in the WIM image. */
+ WIMLIB_UPDATE_OP_RENAME,
+};
- /** Rename a file or directory tree in the WIM image. */
- WIMLIB_UPDATE_OP_RENAME,
- } op;
- union {
- /** Data for a ::WIMLIB_UPDATE_OP_ADD operation. */
- struct wimlib_add_command {
- /** Filesystem path to the file or directory tree to
- * add. */
- wimlib_tchar *fs_source_path;
- /** Path, specified from the root of the WIM image, at
- * which to add the file or directory tree within the
- * WIM image. */
- wimlib_tchar *wim_target_path;
-
- /** Configuration for excluded files. @c NULL means
- * exclude no files (use no configuration), unless
- * ::WIMLIB_ADD_FLAG_WINCONFIG is specified in @p
- * add_flags. */
- struct wimlib_capture_config *config;
-
- /** Bitwise OR of WIMLIB_ADD_FLAG_* flags. */
- int add_flags;
- } add;
- /** Data for a ::WIMLIB_UPDATE_OP_DELETE operation. */
- struct wimlib_delete_command {
- /** Path, specified from the root of the WIM image, for
- * the file or directory tree within the WIM image to be
- * deleted. */
- wimlib_tchar *wim_path;
- /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
- int delete_flags;
- } delete;
- /** Data for a ::WIMLIB_UPDATE_OP_RENAME operation. */
- struct wimlib_rename_command {
- /** Path, specified from the root of the WIM image, for
- * the source file or directory tree within the WIM
- * image. */
- wimlib_tchar *wim_source_path;
- /** Path, specified from the root of the WIM image, for
- * the destination file or directory tree within the WIM
- * image. */
- wimlib_tchar *wim_target_path;
- /** Reserved; set to 0. */
- int rename_flags;
- } rename;
- };
+/** Data for a ::WIMLIB_UPDATE_OP_ADD operation. */
+struct wimlib_add_command {
+ /** Filesystem path to the file or directory tree to add. */
+ wimlib_tchar *fs_source_path;
+
+ /** Destination path in the WIM image. Use ::WIMLIB_WIM_ROOT_PATH to
+ * specify the root directory of the WIM image. */
+ wimlib_tchar *wim_target_path;
+
+ /** Path to capture configuration file to use, or @c NULL for default.
+ */
+ wimlib_tchar *config_file;
+
+ /** Bitwise OR of WIMLIB_ADD_FLAG_* flags. */
+ int add_flags;
};
-/** Specification of a file or directory tree to extract from a WIM image. */
-struct wimlib_extract_command {
- /** Path to file or directory tree within the WIM image to extract. It
- * must be provided as an absolute path from the root of the WIM image.
- * The path separators may be either forward slashes or backslashes. */
+/** Data for a ::WIMLIB_UPDATE_OP_DELETE operation. */
+struct wimlib_delete_command {
+
+ /** Path, specified from the root of the WIM image, for the file or
+ * directory tree within the WIM image to be deleted. */
+ wimlib_tchar *wim_path;
+
+ /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
+ int delete_flags;
+};
+
+/** Data for a ::WIMLIB_UPDATE_OP_RENAME operation. */
+struct wimlib_rename_command {
+
+ /** Path, specified from the root of the WIM image, for the source file
+ * or directory tree within the WIM image. */
wimlib_tchar *wim_source_path;
- /** Filesystem path to extract the file or directory tree to. */
- wimlib_tchar *fs_dest_path;
+ /** Path, specified from the root of the WIM image, for the destination
+ * file or directory tree within the WIM image. */
+ wimlib_tchar *wim_target_path;
+
+ /** Reserved; set to 0. */
+ int rename_flags;
+};
+
+/** Specification of an update to perform on a WIM image. */
+struct wimlib_update_command {
+
+ enum wimlib_update_op op;
- /** Bitwise or of zero or more of the WIMLIB_EXTRACT_FLAG_* flags. */
- int extract_flags;
+ union {
+ struct wimlib_add_command add;
+ struct wimlib_delete_command delete_; /* Underscore is for C++
+ compatibility. */
+ struct wimlib_rename_command rename;
+ };
};
+/** @} */
+/** @addtogroup G_general
+ * @{ */
+
/**
* Possible values of the error code returned by many functions in wimlib.
*
* codes can be returned by a given function, and what they mean.
*/
enum wimlib_error_code {
- WIMLIB_ERR_SUCCESS = 0,
- WIMLIB_ERR_ALREADY_LOCKED,
- WIMLIB_ERR_DECOMPRESSION,
- WIMLIB_ERR_DELETE_STAGING_DIR,
- WIMLIB_ERR_FILESYSTEM_DAEMON_CRASHED,
- WIMLIB_ERR_FORK,
- WIMLIB_ERR_FUSE,
- WIMLIB_ERR_FUSERMOUNT,
- WIMLIB_ERR_GLOB_HAD_NO_MATCHES,
- WIMLIB_ERR_ICONV_NOT_AVAILABLE,
- WIMLIB_ERR_IMAGE_COUNT,
- WIMLIB_ERR_IMAGE_NAME_COLLISION,
- WIMLIB_ERR_INSUFFICIENT_PRIVILEGES,
- WIMLIB_ERR_INTEGRITY,
- WIMLIB_ERR_INVALID_CAPTURE_CONFIG,
- WIMLIB_ERR_INVALID_CHUNK_SIZE,
- WIMLIB_ERR_INVALID_COMPRESSION_TYPE,
- WIMLIB_ERR_INVALID_HEADER,
- WIMLIB_ERR_INVALID_IMAGE,
- WIMLIB_ERR_INVALID_INTEGRITY_TABLE,
- WIMLIB_ERR_INVALID_LOOKUP_TABLE_ENTRY,
- WIMLIB_ERR_INVALID_METADATA_RESOURCE,
- WIMLIB_ERR_INVALID_MULTIBYTE_STRING,
- WIMLIB_ERR_INVALID_OVERLAY,
- WIMLIB_ERR_INVALID_PARAM,
- WIMLIB_ERR_INVALID_PART_NUMBER,
- WIMLIB_ERR_INVALID_PIPABLE_WIM,
- WIMLIB_ERR_INVALID_REPARSE_DATA,
- WIMLIB_ERR_INVALID_RESOURCE_HASH,
- WIMLIB_ERR_INVALID_UNMOUNT_MESSAGE,
- WIMLIB_ERR_INVALID_UTF16_STRING,
- WIMLIB_ERR_INVALID_UTF8_STRING,
- WIMLIB_ERR_IS_DIRECTORY,
- WIMLIB_ERR_LIBXML_UTF16_HANDLER_NOT_AVAILABLE,
- WIMLIB_ERR_LINK,
- WIMLIB_ERR_METADATA_NOT_FOUND,
- WIMLIB_ERR_MKDIR,
- WIMLIB_ERR_MQUEUE,
- WIMLIB_ERR_NOMEM,
- WIMLIB_ERR_NOTDIR,
- WIMLIB_ERR_NOTEMPTY,
- WIMLIB_ERR_NOT_A_REGULAR_FILE,
- WIMLIB_ERR_NOT_A_WIM_FILE,
- WIMLIB_ERR_NOT_PIPABLE,
- WIMLIB_ERR_NO_FILENAME,
- WIMLIB_ERR_NTFS_3G,
- WIMLIB_ERR_OPEN,
- WIMLIB_ERR_OPENDIR,
- WIMLIB_ERR_PATH_DOES_NOT_EXIST,
- WIMLIB_ERR_READ,
- WIMLIB_ERR_READLINK,
- WIMLIB_ERR_RENAME,
- WIMLIB_ERR_REOPEN,
- WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED,
- WIMLIB_ERR_RESOURCE_NOT_FOUND,
- WIMLIB_ERR_RESOURCE_ORDER,
- WIMLIB_ERR_SET_ATTRIBUTES,
- WIMLIB_ERR_SET_REPARSE_DATA,
- WIMLIB_ERR_SET_SECURITY,
- WIMLIB_ERR_SET_SHORT_NAME,
- WIMLIB_ERR_SET_TIMESTAMPS,
- WIMLIB_ERR_SPLIT_INVALID,
- WIMLIB_ERR_SPLIT_UNSUPPORTED,
- WIMLIB_ERR_STAT,
- WIMLIB_ERR_TIMEOUT,
- WIMLIB_ERR_UNEXPECTED_END_OF_FILE,
- WIMLIB_ERR_UNICODE_STRING_NOT_REPRESENTABLE,
- WIMLIB_ERR_UNKNOWN_VERSION,
- WIMLIB_ERR_UNSUPPORTED,
- WIMLIB_ERR_UNSUPPORTED_FILE,
- WIMLIB_ERR_VOLUME_LACKS_FEATURES,
- WIMLIB_ERR_WIM_IS_READONLY,
- WIMLIB_ERR_WRITE,
- WIMLIB_ERR_XML,
+ WIMLIB_ERR_SUCCESS = 0,
+ WIMLIB_ERR_ALREADY_LOCKED = 1,
+ WIMLIB_ERR_DECOMPRESSION = 2,
+ WIMLIB_ERR_FUSE = 6,
+ WIMLIB_ERR_GLOB_HAD_NO_MATCHES = 8,
+ WIMLIB_ERR_ICONV_NOT_AVAILABLE = 9,
+ WIMLIB_ERR_IMAGE_COUNT = 10,
+ WIMLIB_ERR_IMAGE_NAME_COLLISION = 11,
+ WIMLIB_ERR_INSUFFICIENT_PRIVILEGES = 12,
+ WIMLIB_ERR_INTEGRITY = 13,
+ WIMLIB_ERR_INVALID_CAPTURE_CONFIG = 14,
+ WIMLIB_ERR_INVALID_CHUNK_SIZE = 15,
+ WIMLIB_ERR_INVALID_COMPRESSION_TYPE = 16,
+ WIMLIB_ERR_INVALID_HEADER = 17,
+ WIMLIB_ERR_INVALID_IMAGE = 18,
+ WIMLIB_ERR_INVALID_INTEGRITY_TABLE = 19,
+ WIMLIB_ERR_INVALID_LOOKUP_TABLE_ENTRY = 20,
+ WIMLIB_ERR_INVALID_METADATA_RESOURCE = 21,
+ WIMLIB_ERR_INVALID_MULTIBYTE_STRING = 22,
+ WIMLIB_ERR_INVALID_OVERLAY = 23,
+ WIMLIB_ERR_INVALID_PARAM = 24,
+ WIMLIB_ERR_INVALID_PART_NUMBER = 25,
+ WIMLIB_ERR_INVALID_PIPABLE_WIM = 26,
+ WIMLIB_ERR_INVALID_REPARSE_DATA = 27,
+ WIMLIB_ERR_INVALID_RESOURCE_HASH = 28,
+ WIMLIB_ERR_INVALID_UTF16_STRING = 30,
+ WIMLIB_ERR_INVALID_UTF8_STRING = 31,
+ WIMLIB_ERR_IS_DIRECTORY = 32,
+ WIMLIB_ERR_IS_SPLIT_WIM = 33,
+ WIMLIB_ERR_LIBXML_UTF16_HANDLER_NOT_AVAILABLE = 34,
+ WIMLIB_ERR_LINK = 35,
+ WIMLIB_ERR_METADATA_NOT_FOUND = 36,
+ WIMLIB_ERR_MKDIR = 37,
+ WIMLIB_ERR_MQUEUE = 38,
+ WIMLIB_ERR_NOMEM = 39,
+ WIMLIB_ERR_NOTDIR = 40,
+ WIMLIB_ERR_NOTEMPTY = 41,
+ WIMLIB_ERR_NOT_A_REGULAR_FILE = 42,
+ WIMLIB_ERR_NOT_A_WIM_FILE = 43,
+ WIMLIB_ERR_NOT_PIPABLE = 44,
+ WIMLIB_ERR_NO_FILENAME = 45,
+ WIMLIB_ERR_NTFS_3G = 46,
+ WIMLIB_ERR_OPEN = 47,
+ WIMLIB_ERR_OPENDIR = 48,
+ WIMLIB_ERR_PATH_DOES_NOT_EXIST = 49,
+ WIMLIB_ERR_READ = 50,
+ WIMLIB_ERR_READLINK = 51,
+ WIMLIB_ERR_RENAME = 52,
+ WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED = 54,
+ WIMLIB_ERR_RESOURCE_NOT_FOUND = 55,
+ WIMLIB_ERR_RESOURCE_ORDER = 56,
+ WIMLIB_ERR_SET_ATTRIBUTES = 57,
+ WIMLIB_ERR_SET_REPARSE_DATA = 58,
+ WIMLIB_ERR_SET_SECURITY = 59,
+ WIMLIB_ERR_SET_SHORT_NAME = 60,
+ WIMLIB_ERR_SET_TIMESTAMPS = 61,
+ WIMLIB_ERR_SPLIT_INVALID = 62,
+ WIMLIB_ERR_STAT = 63,
+ WIMLIB_ERR_UNEXPECTED_END_OF_FILE = 65,
+ WIMLIB_ERR_UNICODE_STRING_NOT_REPRESENTABLE = 66,
+ WIMLIB_ERR_UNKNOWN_VERSION = 67,
+ WIMLIB_ERR_UNSUPPORTED = 68,
+ WIMLIB_ERR_UNSUPPORTED_FILE = 69,
+ WIMLIB_ERR_WIM_IS_READONLY = 71,
+ WIMLIB_ERR_WRITE = 72,
+ WIMLIB_ERR_XML = 73,
+ WIMLIB_ERR_WIM_IS_ENCRYPTED = 74,
+ WIMLIB_ERR_WIMBOOT = 75,
+ WIMLIB_ERR_ABORTED_BY_PROGRESS = 76,
+ WIMLIB_ERR_UNKNOWN_PROGRESS_STATUS = 77,
+ WIMLIB_ERR_MKNOD = 78,
+ WIMLIB_ERR_MOUNTED_IMAGE_IS_BUSY = 79,
+ WIMLIB_ERR_NOT_A_MOUNTPOINT = 80,
+ WIMLIB_ERR_NOT_PERMITTED_TO_UNMOUNT = 81,
+ WIMLIB_ERR_FVE_LOCKED_VOLUME = 82,
};
/** Used to specify all images in the WIM. */
#define WIMLIB_ALL_IMAGES (-1)
+/** @} */
+
/**
+ * @ingroup G_modifying_wims
+ *
* Appends an empty image to a WIM file. This empty image will initially
* contain no files or directories, although if written without further
* modifications, a root directory will be created automatically for it. After
int *new_idx_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Adds an image to a WIM file from an on-disk directory tree or NTFS volume.
*
* The directory tree or NTFS volume is scanned immediately to load the dentry
* any) until wimlib_write() or wimlib_overwrite() is called.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file to which the image will be
- * added.
+ * Pointer to the ::WIMStruct to which to add the image.
* @param source
* A path to a directory or unmounted NTFS volume that will be captured as
* a WIM image.
* Name to give the new image. If @c NULL or empty, the new image is given
* no name. If nonempty, it must specify a name that does not already
* exist in @p wim.
- * @param config
- * Capture configuration that specifies files, directories, or path globs
- * to exclude from being captured. If @c NULL, a dummy configuration where
- * no paths are treated specially is used.
+ * @param config_file
+ * Path to capture configuration file, or @c NULL. This file may specify,
+ * among other things, which files to exclude from capture. See the man
+ * page for <b>wimlib-imagex capture</b> (<b>--config</b> option) for
+ * details of the file format. If @c NULL, the default capture
+ * configuration shall be used. Ordinarily, the default capture
+ * configuration will result in no files being excluded from capture purely
+ * based on name; however, the ::WIMLIB_ADD_FLAG_WINCONFIG and
+ * ::WIMLIB_ADD_FLAG_WIMBOOT flags modify the default.
* @param add_flags
* Bitwise OR of flags prefixed with WIMLIB_ADD_FLAG.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. The progress messages that will be
- * received are ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_SCAN_END, and, if ::WIMLIB_ADD_FLAG_VERBOSE was
- * included in @p add_flags, also ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY.
*
* @return 0 on success; nonzero on error. On error, changes to @p wim are
* discarded so that it appears to be in the same state as when this function
* returned by wimlib_add_empty_image() may be returned, as well as any error
* codes returned by wimlib_update_image() other than ones documented as only
* being returned specifically by an update involving delete or rename commands.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and ::WIMLIB_PROGRESS_MSG_SCAN_END.
+ * In addition, if ::WIMLIB_ADD_FLAG_VERBOSE is specified in @p add_flags, it
+ * will receive ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY.
*/
extern int
wimlib_add_image(WIMStruct *wim,
const wimlib_tchar *source,
const wimlib_tchar *name,
- const struct wimlib_capture_config *config,
- int add_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *config_file,
+ int add_flags);
-/** This function is equivalent to wimlib_add_image() except it allows for
+/**
+ * @ingroup G_modifying_wims
+ *
+ * This function is equivalent to wimlib_add_image() except it allows for
* multiple sources to be combined into a single WIM image. This is done by
* specifying the @p sources and @p num_sources parameters instead of the @p
* source parameter of wimlib_add_image(). The rest of the parameters are the
const struct wimlib_capture_source *sources,
size_t num_sources,
const wimlib_tchar *name,
- const struct wimlib_capture_config *config,
- int add_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *config_file,
+ int add_flags);
/**
+ * @ingroup G_modifying_wims
+ *
+ * Add the file or directory tree at @p fs_source_path on the filesystem to the
+ * location @p wim_target_path within the specified @p image of the @p wim.
+ *
+ * This just builds an appropriate ::wimlib_add_command and passes it to
+ * wimlib_update_image().
+ */
+extern int
+wimlib_add_tree(WIMStruct *wim, int image,
+ const wimlib_tchar *fs_source_path,
+ const wimlib_tchar *wim_target_path, int add_flags);
+
+/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Creates a ::WIMStruct for a new WIM file.
*
* This only creates an in-memory structure for a WIM that initially contains no
* images. No on-disk file is created until wimlib_write() is called.
*
* @param ctype
- * The type of compression to be used in the new WIM file. Must be
- * ::WIMLIB_COMPRESSION_TYPE_NONE, ::WIMLIB_COMPRESSION_TYPE_LZX, or
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS.
+ * The type of compression to be used in the new WIM file, as one of the
+ * ::wimlib_compression_type constants.
+ * <br/>
+ * This choice is not necessarily final; if desired, it can still be
+ * changed at any time before the WIM is written to disk, using
+ * wimlib_set_output_compression_type(). In addition, if you wish to use a
+ * non-default chunk size, you will need to call
+ * wimlib_set_output_chunk_size().
* @param wim_ret
* On success, a pointer to an opaque ::WIMStruct for the new WIM file is
- * written to the memory location pointed to by this paramater. The
+ * written to the memory location pointed to by this parameter. The
* ::WIMStruct must be freed using using wimlib_free() when finished with
* it.
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
- * @p ctype was not ::WIMLIB_COMPRESSION_TYPE_NONE,
- * ::WIMLIB_COMPRESSION_TYPE_LZX, or ::WIMLIB_COMPRESSION_TYPE_XPRESS.
+ * @p ctype was not a supported compression type.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocate needed memory.
*/
wimlib_create_new_wim(int ctype, WIMStruct **wim_ret);
/**
- * Deletes an image, or all images, from a WIM file.
+ * @ingroup G_modifying_wims
*
- * All streams referenced by the image(s) being deleted are removed from the
- * lookup table of the WIM if they are not referenced by any other images in the
- * WIM.
+ * Deletes an image, or all images, from a WIM file.
*
- * Please note that @b no changes are committed to the underlying WIM file (if
- * any) until wimlib_write() or wimlib_overwrite() is called.
+ * Note: no changes are committed to the underlying WIM file (if any) until
+ * wimlib_write() or wimlib_overwrite() is called.
*
* @param wim
* Pointer to the ::WIMStruct for the WIM file that contains the image(s)
* @param image
* The number of the image to delete, or ::WIMLIB_ALL_IMAGES to delete all
* images.
+ *
* @return 0 on success; nonzero on failure. On failure, @p wim is guaranteed
* to be left unmodified only if @p image specified a single image. If instead
* @p image was ::WIMLIB_ALL_IMAGES and @p wim contained more than one image, it's
wimlib_delete_image(WIMStruct *wim, int image);
/**
+ * @ingroup G_modifying_wims
+ *
+ * Delete the @p path from the specified @p image of the @p wim.
+ *
+ * This just builds an appropriate ::wimlib_delete_command and passes it to
+ * wimlib_update_image().
+ */
+extern int
+wimlib_delete_path(WIMStruct *wim, int image,
+ const wimlib_tchar *path, int delete_flags);
+
+/**
+ * @ingroup G_modifying_wims
+ *
* Exports an image, or all the images, from a WIM file, into another WIM file.
*
* The destination image is made to share the same dentry tree and security data
* structure as the source image. This places some restrictions on additional
- * functions that may be called. wimlib_mount_image() may not be called on
- * either the source image or the destination image without an intervening call
- * to a function that un-shares the images, such as wimlib_free() on @p
- * dest_wim, or wimlib_delete_image() on either the source or destination image.
- * Furthermore, you may not call wimlib_free() on @p src_wim before calling
- * wimlib_write() or wimlib_overwrite() on @p dest_wim because @p dest_wim will
- * have references back to @p src_wim.
+ * functions that may be called. For example, you may not call wimlib_free() on
+ * @p src_wim before calling wimlib_write() or wimlib_overwrite() on @p dest_wim
+ * because @p dest_wim will have references back to @p src_wim.
*
* If this function fails, all changes to @p dest_wim are rolled back.
*
* dest_wim (if any) until wimlib_write() or wimlib_overwrite() is called.
*
* @param src_wim
- * Pointer to the ::WIMStruct for a stand-alone WIM or part 1 of a split
- * WIM that contains the image(s) being exported.
+ * The WIM from which to export the images, specified as a pointer to the
+ * ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1 of a
+ * split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
* @param src_image
* The image to export from @p src_wim, as either a 1-based image index to
* export a single image, or ::WIMLIB_ALL_IMAGES to export all images.
* parameter is overridden by ::WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS.
* @param export_flags
* Bitwise OR of flags prefixed with WIMLIB_EXPORT_FLAG.
- * @param progress_func
- * Currently ignored, but reserved for a function that will be called with
- * information about the operation. Use NULL if no additional information
- * is desired.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
WIMStruct *dest_wim,
const wimlib_tchar *dest_name,
const wimlib_tchar *dest_description,
- int export_flags,
- wimlib_progress_func_t progress_func);
+ int export_flags);
/**
- * Extract zero or more files or directory trees from a WIM image.
+ * @ingroup G_extracting_wims
*
- * This generalizes the single-image extraction functionality of
- * wimlib_extract_image() to allow extracting only the specified subsets of the
+ * Extracts an image, or all images, from a WIM to a directory or NTFS volume
* image.
*
- * @param wim
- * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
- * split WIM.
- *
- * @param image
- * The 1-based number of the image in @p wim from which the files or
- * directory trees are to be extracted. It cannot be ::WIMLIB_ALL_IMAGES.
- *
- * @param cmds
- * An array of ::wimlib_extract_command structures that specifies the
- * extractions to perform.
- *
- * @param num_cmds
- * Number of commands in the @p cmds array.
- *
- * @param default_extract_flags
- * Default extraction flags; the behavior shall be as if these flags had
- * been specified in the ::wimlib_extract_command.extract_flags member in
- * each extraction command, in combination with any flags already present.
- *
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
- *
- * @return 0 on success; nonzero on error. The possible error codes include
- * most of those documented as returned by wimlib_extract_image() as well as the
- * following additional error codes:
- *
- * @retval ::WIMLIB_ERR_INVALID_IMAGE
- * @p image was ::WIMLIB_ALL_IMAGES (or was not otherwise a valid image in
- * the WIM file).
- * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
- * The ::wimlib_extract_command.wim_source_path member in one of the
- * extract commands did not exist in the WIM.
- * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
- * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified for an extraction command
- * in which ::wimlib_extract_command.wim_source_path existed but was not a
- * regular file or directory.
- * @retval ::WIMLIB_ERR_INVALID_PARAM
- * ::WIMLIB_EXTRACT_FLAG_HARDLINK or ::WIMLIB_EXTRACT_FLAG_SYMLINK was
- * specified for some commands but not all; or
- * ::wimlib_extract_command.fs_dest_path was @c NULL or the empty string
- * for one or more commands; or ::WIMLIB_EXTRACT_FLAG_RPFIX was specified
- * for a command in which ::wimlib_extract_command.wim_source_path did not
- * specify the root directory of the WIM image.
- */
-extern int
-wimlib_extract_files(WIMStruct *wim,
- int image,
- const struct wimlib_extract_command *cmds,
- size_t num_cmds,
- int default_extract_flags,
- wimlib_progress_func_t progress_func);
-
-/**
- * Extracts an image, or all images, from a standalone or split WIM file to a
- * directory or directly to a NTFS volume image.
- *
* The exact behavior of how wimlib extracts files from a WIM image is
* controllable by the @p extract_flags parameter, but there also are
* differences depending on the platform (UNIX-like vs Windows). See the manual
* page for <b>wimlib-imagex apply</b> for more information, including about the
- * special "NTFS volume extraction mode" entered by providing
- * ::WIMLIB_EXTRACT_FLAG_NTFS.
- *
- * All extracted data is SHA1-summed, and ::WIMLIB_ERR_INVALID_RESOURCE_HASH is
- * returned if any resulting SHA1 message digests do not match the values
- * provided in the WIM file. Therefore, if this function is successful, you can
- * be fairly sure that any compressed data in the WIM was uncompressed
- * correctly.
+ * NTFS-3g extraction mode.
*
* @param wim
- * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
- * split WIM.
+ * The WIM from which to extract the image(s), specified as a pointer to
+ * the ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1
+ * of a split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
* @param image
- * The image to extract. Can be the number of an image, or ::WIMLIB_ALL_IMAGES
- * to specify that all images are to be extracted. ::WIMLIB_ALL_IMAGES cannot
- * be used if ::WIMLIB_EXTRACT_FLAG_NTFS is specified in @p extract_flags.
+ * The image to extract, specified as either the 1-based index of a single
+ * image to extract, or ::WIMLIB_ALL_IMAGES to specify that all images are
+ * to be extracted. However, ::WIMLIB_ALL_IMAGES cannot be used if
+ * ::WIMLIB_EXTRACT_FLAG_NTFS is specified in @p extract_flags.
* @param target
- * Directory to extract the WIM image(s) to (created if it does not already
- * exist); or, with ::WIMLIB_EXTRACT_FLAG_NTFS in @p extract_flags, the
- * path to the unmounted NTFS volume to extract the image to.
+ * Directory to extract the WIM image(s) to; or, with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS specified in @p extract_flags, the path to
+ * the unmounted NTFS volume to which to extract the image.
* @param extract_flags
- * Bitwise OR of the flags prefixed with WIMLIB_EXTRACT_FLAG.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
+ * Bitwise OR of flags prefixed with WIMLIB_EXTRACT_FLAG.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_DECOMPRESSION
- * Failed to decompress a resource to be extracted.
+ * Failed to decompress data contained in the WIM.
+ * @retval ::WIMLIB_ERR_INVALID_METADATA_RESOURCE
+ * The metadata for one of the images to extract was invalid.
* @retval ::WIMLIB_ERR_INVALID_PARAM
- * Both ::WIMLIB_EXTRACT_FLAG_HARDLINK and ::WIMLIB_EXTRACT_FLAG_SYMLINK
- * were specified in @p extract_flags; or both
- * ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS and ::WIMLIB_EXTRACT_FLAG_NO_ACLS were
- * specified in @p extract_flags; or both ::WIMLIB_EXTRACT_FLAG_RPFIX and
- * ::WIMLIB_EXTRACT_FLAG_NORPFIX were specified in @p extract_flags; or
- * ::WIMLIB_EXTRACT_FLAG_RESUME was specified in @p extract_flags; or if
- * ::WIMLIB_EXTRACT_FLAG_NTFS was specified in @p extract_flags and
- * @p image was ::WIMLIB_ALL_IMAGES.
+ * The extraction flags were invalid; more details may be found in the
+ * documentation for the specific extraction flags that were specified. Or
+ * @p target was @c NULL or an empty string, or @p wim was @c NULL.
* @retval ::WIMLIB_ERR_INVALID_RESOURCE_HASH
- * The SHA1 message digest of an extracted stream did not match the SHA1
- * message digest given in the WIM file.
+ * The SHA1 message digest of an extracted stream did not match the SHA1
+ * message digest given in the WIM. In other words, the WIM file is
+ * corrupted, so the data cannot be extracted in its original form.
* @retval ::WIMLIB_ERR_LINK
- * Failed to create a symbolic link or a hard link.
+ * Failed to create a symbolic link or a hard link.
+ * @retval ::WIMLIB_ERR_METADATA_NOT_FOUND
+ * The metadata resource for one of the images to extract was not found.
+ * This can happen if @p wim represents a non-first part of a split WIM.
* @retval ::WIMLIB_ERR_MKDIR
- * Failed create a directory.
+ * Failed create a directory.
* @retval ::WIMLIB_ERR_NOMEM
- * Failed to allocate needed memory.
+ * Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_OPEN
- * Could not create a file, or failed to open an already-extracted file.
+ * Could not create a file, or failed to open an already-extracted file.
* @retval ::WIMLIB_ERR_READ
- * Failed to read data from the WIM file associated with @p wim.
+ * Failed to read data from the WIM.
* @retval ::WIMLIB_ERR_READLINK
* Failed to determine the target of a symbolic link in the WIM.
* @retval ::WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED
* Failed to fix the target of an absolute symbolic link (e.g. if the
- * target would have exceeded the maximum allowed length). (Only if
- * reparse data was supported by the extraction mode and
- * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS was specified in @p extract_flags.)
+ * target would have exceeded the maximum allowed length). (Only if
+ * reparse data was supported by the extraction mode and
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS was specified in @p
+ * extract_flags.)
* @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
* One of the files or directories that needed to be extracted referenced a
* stream not present in the WIM's lookup table (or in any of the lookup
- * tables of the split WIM parts).
+ * tables of the split WIM parts). This can happen if the WIM is not
+ * standalone and the necessary resource WIMs, or split WIM parts, were not
+ * referenced with wimlib_reference_resource_files().
* @retval ::WIMLIB_ERR_SET_ATTRIBUTES
* Failed to set attributes on a file.
* @retval ::WIMLIB_ERR_SET_REPARSE_DATA
* Failed to set reparse data on a file (only if reparse data was supported
* by the extraction mode).
* @retval ::WIMLIB_ERR_SET_SECURITY
- * Failed to set security descriptor on a file
- * (only if ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS was specified in @p
- * extract_flags).
+ * Failed to set security descriptor on a file.
* @retval ::WIMLIB_ERR_SET_SHORT_NAME
- * Failed to set the short name of a file (only if
- * ::WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES was specified in @p extract_flags).
+ * Failed to set the short name of a file.
* @retval ::WIMLIB_ERR_SET_TIMESTAMPS
- * Failed to set timestamps on a file (only if
- * ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS was specified in @p extract_flags).
+ * Failed to set timestamps on a file.
* @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
- * Unexpected end-of-file occurred when reading data from the WIM file
- * associated with @p wim.
+ * Unexpected end-of-file occurred when reading data from the WIM.
* @retval ::WIMLIB_ERR_UNSUPPORTED
* A requested extraction flag, or the data or metadata that must be
* extracted to support it, is unsupported in the build and configuration
* volume. Flags affected by this include ::WIMLIB_EXTRACT_FLAG_NTFS,
* ::WIMLIB_EXTRACT_FLAG_UNIX_DATA, ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS,
* ::WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES,
- * ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS,
- * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS, ::WIMLIB_EXTRACT_FLAG_SYMLINK,
- * and ::WIMLIB_EXTRACT_FLAG_HARDLINK. For example, if
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS, and
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS. For example, if
* ::WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES is specified in @p
- * extract_flags,
- * ::WIMLIB_ERR_UNSUPPORTED will be returned if the WIM image contains one
- * or more files with short names, but extracting short names is not
- * supported --- on Windows, this occurs if the target volume does not
- * support short names, while on non-Windows, this occurs if
+ * extract_flags, ::WIMLIB_ERR_UNSUPPORTED will be returned if the WIM
+ * image contains one or more files with short names, but extracting short
+ * names is not supported --- on Windows, this occurs if the target volume
+ * does not support short names, while on non-Windows, this occurs if
* ::WIMLIB_EXTRACT_FLAG_NTFS was not specified in @p extract_flags.
+ * @retval ::WIMLIB_ERR_WIMBOOT
+ * ::WIMLIB_EXTRACT_FLAG_WIMBOOT was specified in @p extract_flags, but
+ * there was a problem creating WIMBoot pointer files.
* @retval ::WIMLIB_ERR_WRITE
* Failed to write data to a file being extracted.
*
- * This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
- * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
- * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
- * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
- * different reasons) to read the metadata resource for an image that needed to
- * be extracted.
+ * If a progress function is registered with @p wim, then as each image is
+ * extracted it will receive ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN, then
+ * zero or more ::WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE messages, then zero
+ * or more ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS messages, then zero or more
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_METADATA messages, then
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END.
*/
extern int
wimlib_extract_image(WIMStruct *wim, int image,
- const wimlib_tchar *target,
- int extract_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *target, int extract_flags);
/**
- * Since wimlib v1.5.0: Extract one or more images from a pipe on which a
- * pipable WIM is being sent.
+ * @ingroup G_extracting_wims
+ *
+ * Extract one image from a pipe on which a pipable WIM is being sent.
*
- * See the documentation for ::WIMLIB_WRITE_FLAG_PIPABLE for more information
- * about pipable WIMs.
+ * See the documentation for ::WIMLIB_WRITE_FLAG_PIPABLE, and @ref
+ * subsec_pipable_wims, for more information about pipable WIMs.
*
* This function operates in a special way to read the WIM fully sequentially.
* As a result, there is no ::WIMStruct is made visible to library users, and
* @param target
* Same as the corresponding parameter to wimlib_extract_image().
* @param extract_flags
- * Same as the corresponding parameter to wimlib_extract_image(), except
- * for the following exceptions: ::WIMLIB_EXTRACT_FLAG_SEQUENTIAL is
- * always implied, since data is always read from @p pipe_fd sequentially
- * in this mode; also, ::WIMLIB_EXTRACT_FLAG_TO_STDOUT is invalid and will
- * result in ::WIMLIB_ERR_INVALID_PARAM being returned.
- * @param progress_func
- * Same as the corresponding parameter to wimlib_extract_image(), except
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN messages will also be
- * received.
+ * Same as the corresponding parameter to wimlib_extract_image().
*
* @return 0 on success; nonzero on error. The possible error codes include
- * those returned by wimlib_extract_image() as well as the following:
+ * those returned by wimlib_extract_image() and wimlib_open_wim() as well as the
+ * following:
*
* @retval ::WIMLIB_ERR_INVALID_PIPABLE_WIM
* Data read from the pipable WIM was invalid.
* @retval ::WIMLIB_ERR_NOT_PIPABLE
- * The WIM being piped in a @p pipe_fd is a normal WIM, not a pipable WIM.
+ * The WIM being piped over @p pipe_fd is a normal WIM, not a pipable WIM.
*/
extern int
wimlib_extract_image_from_pipe(int pipe_fd,
const wimlib_tchar *image_num_or_name,
- const wimlib_tchar *target, int extract_flags,
- wimlib_progress_func_t progress_func);
+ const wimlib_tchar *target, int extract_flags);
+
+/*
+ * @ingroup G_extracting_wims
+ *
+ * Same as wimlib_extract_image_from_pipe(), but allows specifying a progress
+ * function. The progress function will be used while extracting the WIM image
+ * and will receive the normal extraction progress messages, such as
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS, in addition to
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN.
+ */
+extern int
+wimlib_extract_image_from_pipe_with_progress(int pipe_fd,
+ const wimlib_tchar *image_num_or_name,
+ const wimlib_tchar *target,
+ int extract_flags,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
+ * @ingroup G_extracting_wims
+ *
+ * Similar to wimlib_extract_paths(), but the paths to extract from the WIM
+ * image are specified in the ASCII, UTF-8, or UTF-16LE text file named by @p
+ * path_list_file which itself contains the list of paths to use, one per line.
+ * Leading and trailing whitespace is ignored. Empty lines and lines beginning
+ * with the ';' or '#' characters are ignored. No quotes are needed, as paths
+ * are otherwise delimited by the newline character. However, quotes will be
+ * stripped if present.
+ *
+ * The error codes are the same as those returned by wimlib_extract_paths(),
+ * except that wimlib_extract_pathlist() returns an appropriate error code if it
+ * cannot read the path list file (e.g. ::WIMLIB_ERR_OPEN, ::WIMLIB_ERR_STAT,
+ * ::WIMLIB_ERR_READ).
+ */
+extern int
+wimlib_extract_pathlist(WIMStruct *wim, int image,
+ const wimlib_tchar *target,
+ const wimlib_tchar *path_list_file,
+ int extract_flags);
+
+/**
+ * @ingroup G_extracting_wims
+ *
+ * Extract zero or more paths (files or directory trees) from the specified WIM
+ * image.
+ *
+ * By default, each path will be extracted to a corresponding subdirectory of
+ * the target based on its location in the WIM image. For example, if one of
+ * the paths to extract is "/Windows/explorer.exe" and the target is "outdir",
+ * the file will be extracted to "outdir/Windows/explorer.exe". This behavior
+ * can be changed by providing the flag
+ * ::WIMLIB_EXTRACT_FLAG_NO_PRESERVE_DIR_STRUCTURE, which will cause each file
+ * or directory tree to be placed directly in the target directory --- so the
+ * same example would extract "/Windows/explorer.exe" to "outdir/explorer.exe".
+ *
+ * Symbolic links will not be dereferenced when paths in the WIM image are
+ * interpreted.
+ *
+ * @param wim
+ * WIM from which to extract the paths, specified as a pointer to the
+ * ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1 of a
+ * split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
+ * @param image
+ * 1-based index of the WIM image from which to extract the paths.
+ * @param paths
+ * Array of paths to extract. Each element must be the absolute path to a
+ * file or directory within the WIM image. Separators may be either
+ * forwards or backwards slashes, and leading path separators are optional.
+ * The paths will be interpreted either case-sensitively (UNIX default) or
+ * case-insensitively (Windows default); however, the behavior can be
+ * configured explicitly at library initialization time by passing an
+ * appropriate flag to wimlib_global_init().
+ * <br/>
+ * By default, the characters @c * and @c ? are interpreted literally.
+ * This can be changed by specifying ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS in @p
+ * extract_flags.
+ * <br/>
+ * By default, if any paths to extract do not exist, the error code
+ * ::WIMLIB_ERR_PATH_DOES_NOT_EXIST is returned. This behavior changes if
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS is specified in @p extract_flags.
+ * @param num_paths
+ * Number of paths specified in @p paths.
+ * @param target
+ * Directory to which to extract the paths; or with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS specified in @p extract_flags, the path to an
+ * unmounted NTFS volume to which to extract the paths. Unlike the @p
+ * paths being extracted, the @p target must be native path. On UNIX-like
+ * systems it may not contain backslashes, for example.
+ * @param extract_flags
+ * Bitwise OR of flags prefixed with WIMLIB_EXTRACT_FLAG.
+ *
+ * @return 0 on success; nonzero on error. Most of the error codes are the same
+ * as those returned by wimlib_extract_image(). Below, some of the error codes
+ * returned in situations specific to path-mode extraction are documented:
+ *
+ * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
+ * One of the paths to extract did not exist in the WIM image. This error
+ * code can only be returned if ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS was not
+ * specified in @p extract_flags, or if both
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS and ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB
+ * were specified in @p extract_flags.
+ * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
+ * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified in @p extract_flags, but
+ * one of the paths to extract did not name a regular file.
+ *
+ * If a progress function is registered with @p wim, it will receive
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS. Note that because the extraction code
+ * is stream-based and not file-based, there is no way to get information about
+ * which path is currently being extracted, but based on byte count you can
+ * still calculate an approximate percentage complete for the extraction overall
+ * which may be all you really need anyway.
+ */
+extern int
+wimlib_extract_paths(WIMStruct *wim,
+ int image,
+ const wimlib_tchar *target,
+ const wimlib_tchar * const *paths,
+ size_t num_paths,
+ int extract_flags);
+
+/**
+ * @ingroup G_wim_information
+ *
* Extracts the XML data of a WIM file to a file stream. Every WIM file
* includes a string of XML that describes the images contained in the WIM.
- * This function works on standalone WIMs as well as split WIM parts.
+ *
+ * See wimlib_get_xml_data() to read the XML data into memory instead.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
* @param fp
* @c stdout, or a FILE* opened for writing, to extract the data to.
*
* @retval ::WIMLIB_ERR_INVALID_PARAM
* @p wim is not a ::WIMStruct that was created by wimlib_open_wim().
* @retval ::WIMLIB_ERR_NOMEM
+ * Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_READ
+ * Error reading the XML data from the WIM file.
* @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
- * Failed to read the XML data from the WIM.
+ * Error reading the XML data from the WIM file.
* @retval ::WIMLIB_ERR_WRITE
* Failed to completely write the XML data to @p fp.
*/
wimlib_extract_xml_data(WIMStruct *wim, FILE *fp);
/**
+ * @ingroup G_general
+ *
* Frees all memory allocated for a WIMStruct and closes all files associated
* with it.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file.
+ * Pointer to the ::WIMStruct to free.
*
* @return This function has no return value.
*/
wimlib_free(WIMStruct *wim);
/**
+ * @ingroup G_general
+ *
* Converts a ::wimlib_compression_type value into a string.
*
* @param ctype
- * ::WIMLIB_COMPRESSION_TYPE_NONE, ::WIMLIB_COMPRESSION_TYPE_LZX,
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS, or another value.
+ * The ::wimlib_compression_type value to convert.
*
* @return
- * A statically allocated string: "None", "LZX", "XPRESS", or "Invalid",
- * respectively.
+ * A statically allocated string naming the compression algorithm,
+ * such as "None", "LZX", "XPRESS", or "Invalid".
*/
extern const wimlib_tchar *
wimlib_get_compression_type_string(int ctype);
/**
+ * @ingroup G_general
+ *
* Converts an error code into a string describing it.
*
* @param code
* The error code returned by one of wimlib's functions.
*
* @return
- * Pointer to a statically allocated string describing the error code,
- * or @c NULL if the error code is not valid.
+ * Pointer to a statically allocated string describing the error code. If
+ * the error code is for some reason not recognized by the library, the
+ * string will be "Unknown error".
*/
extern const wimlib_tchar *
wimlib_get_error_string(enum wimlib_error_code code);
/**
+ * @ingroup G_wim_information
+ *
* Returns the description of the specified image.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or a split WIM part.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
* @param image
* The number of the image, numbered starting at 1.
*
wimlib_get_image_description(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Returns the name of the specified image.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or a split WIM part.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
* @param image
* The number of the image, numbered starting at 1.
*
extern const wimlib_tchar *
wimlib_get_image_name(const WIMStruct *wim, int image);
+/**
+ * @ingroup G_general
+ *
+ * Returns the version of wimlib as a 32-bit number whose top 12 bits contain
+ * the major version, the next 10 bits contain the minor version, and the low 10
+ * bits contain the patch version.
+ *
+ * In other words, the returned value is equal to <code>((WIMLIB_MAJOR_VERSION
+ * << 22) | (WIMLIB_MINOR_VERSION << 10) | WIMLIB_PATCH_VERSION)</code> for the
+ * corresponding header file.
+ */
+extern uint32_t
+wimlib_get_version(void);
/**
+ * @ingroup G_wim_information
+ *
* Get basic information about a WIM file.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be for either a
- * standalone WIM or part of a split WIM.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
* @param info
* A ::wimlib_wim_info structure that will be filled in with information
* about the WIM file.
wimlib_get_wim_info(WIMStruct *wim, struct wimlib_wim_info *info);
/**
+ * @ingroup G_wim_information
+ *
+ * Read the XML data of a WIM file into an in-memory buffer. Every WIM file
+ * includes a string of XML that describes the images contained in the WIM.
+ *
+ * See wimlib_extract_xml_data() to extract the XML data to a file stream
+ * instead.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
+ * @param buf_ret
+ * On success, a pointer to an allocated buffer containing the raw UTF16-LE
+ * XML data is written to this location.
+ * @param bufsize_ret
+ * The size of the XML data in bytes is written to this location.
+ *
+ * @return 0 on success; nonzero on error.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p wim is not a ::WIMStruct that was created by wimlib_open_wim(), or
+ * @p buf_ret or @p bufsize_ret was @c NULL.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * @retval ::WIMLIB_ERR_READ
+ * @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
+ * Failed to read the XML data from the WIM.
+ */
+extern int
+wimlib_get_xml_data(WIMStruct *wim, void **buf_ret, size_t *bufsize_ret);
+
+/**
+ * @ingroup G_general
+ *
* Initialization function for wimlib. Call before using any other wimlib
- * function except wimlib_set_print_errors(). (However, currently this is not
- * strictly necessary and it will be called automatically if not done manually,
- * but you should not rely on this behavior.)
+ * function except wimlib_set_print_errors(). If not done manually, this
+ * function will be called automatically with @p init_flags set to
+ * ::WIMLIB_INIT_FLAG_ASSUME_UTF8. This function does nothing if called again
+ * after it has already successfully run.
*
* @param init_flags
* Bitwise OR of flags prefixed with WIMLIB_INIT_FLAG.
wimlib_global_init(int init_flags);
/**
+ * @ingroup G_general
+ *
* Cleanup function for wimlib. You are not required to call this function, but
* it will release any global resources allocated by the library.
*/
wimlib_global_cleanup(void);
/**
+ * @ingroup G_wim_information
+ *
* Determines if an image name is already used by some image in the WIM.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
* @param name
* The name to check.
*
wimlib_image_name_in_use(const WIMStruct *wim, const wimlib_tchar *name);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through a file or directory tree in the WIM image. By specifying
* appropriate flags and a callback function, you can get the attributes of a
* file in the WIM, get a directory listing, or even get a listing of the entire
* WIM image.
*
* @param wim
- * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
- * split WIM.
+ * The WIM containing the image(s) over which to iterate, specified as a
+ * pointer to the ::WIMStruct for a standalone WIM file, a delta WIM file,
+ * or part 1 of a split WIM. In the case of a WIM file that is not
+ * standalone, this ::WIMStruct should have had any needed external
+ * resources previously referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files(). If not, see
+ * ::WIMLIB_ITERATE_DIR_TREE_FLAG_RESOURCES_NEEDED for information about
+ * the behavior when resources are missing.
*
* @param image
* The 1-based number of the image in @p wim that contains the files or
* Path in the WIM image at which to do the iteration.
*
* @param flags
- * Bitwise OR of ::WIMLIB_ITERATE_DIR_TREE_FLAG_RECURSIVE and/or
- * ::WIMLIB_ITERATE_DIR_TREE_FLAG_CHILDREN.
+ * Bitwise OR of flags prefixed with WIMLIB_ITERATE_DIR_TREE_FLAG.
*
* @param cb
* A callback function that will receive each directory entry.
wimlib_iterate_dir_tree_callback_t cb, void *user_ctx);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through the lookup table of a WIM file. This can be used to directly
- * get a listing of the unique resources contained in a WIM file. Both file
- * resources and metadata resources are included.
+ * get a listing of the unique resources contained in a WIM file over all
+ * images. Both file resources and metadata resources are included. However,
+ * only resources actually included in the file represented by @a wim, plus
+ * explicitly referenced external resources (via wimlib_reference_resources() or
+ * wimlib_reference_resource_files()) are included in the iteration. For
+ * example, if @p wim represents just one part of a split WIM, then only
+ * resources in that part will be included, unless other resources were
+ * explicitly referenced.
*
* @param wim
- * Pointer to the ::WIMStruct of a standalone WIM file or a split WIM part.
- * Note: metadata resources will only be included if the WIM is standalone
- * or the first part of the split WIM.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
*
* @param flags
* Reserved; set to 0.
void *user_ctx);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Joins a split WIM into a stand-alone one-part WIM.
*
* @param swms
* Number of filenames in @p swms.
* @param swm_open_flags
* Open flags for the split WIM parts (e.g.
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY). Note: ::WIMLIB_OPEN_FLAG_SPLIT_OK
- * is automatically added to the value specified here.
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY).
* @param wim_write_flags
* Bitwise OR of relevant flags prefixed with WIMLIB_WRITE_FLAG, which will
* be used to write the joined WIM.
* @param output_path
* The path to write the joined WIM file to.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
*
* @return 0 on success; nonzero on error. This function may return most error
* codes that can be returned by wimlib_open_wim() and wimlib_write(), as well
* the parts of the original WIM, there are duplicate parts, or not all the
* parts have the same GUID and compression type.
*
- * Note: wimlib_export_image() can provide similar functionality to
- * wimlib_join(), since it is possible to export all images from a split WIM
- * into a new ::WIMStruct, then write it. However, wimlib_join() may have
- * better performance than this method.
+ * Note: wimlib is generalized enough that this function is not actually needed
+ * to join a split WIM; instead, you could open the first part of the split WIM,
+ * then reference the other parts with wimlib_reference_resource_files(), then
+ * write the joined WIM using wimlib_write(). However, wimlib_join() provides
+ * an easy-to-use wrapper around this that has some advantages (e.g. extra
+ * sanity checks).
*/
extern int
wimlib_join(const wimlib_tchar * const *swms,
unsigned num_swms,
const wimlib_tchar *output_path,
int swm_open_flags,
- int wim_write_flags,
- wimlib_progress_func_t progress_func);
+ int wim_write_flags);
/**
- * Compress a chunk of a WIM resource using LZX compression.
- *
- * This function is exported for convenience only and should only be used by
- * library clients looking to make use of wimlib's compression code for another
- * purpose.
- *
- * @param chunk
- * Uncompressed data of the chunk.
- * @param chunk_size
- * Size of the uncompressed chunk, in bytes.
- * @param out
- * Pointer to output buffer of size at least (@p chunk_size - 1) bytes.
- *
- * @return
- * The size of the compressed data written to @p out in bytes, or 0 if the
- * data could not be compressed to (@p chunk_size - 1) bytes or fewer.
- *
- * As a special requirement, the compression code is optimized for the WIM
- * format and therefore requires (@p chunk_size <= 32768).
- */
-extern unsigned
-wimlib_lzx_compress(const void *chunk, unsigned chunk_size, void *out);
-
-/**
- * Decompresses a block of LZX-compressed data as used in the WIM file format.
- *
- * Note that this will NOT work unmodified for LZX as used in the cabinet
- * format, which is not the same as in the WIM format!
- *
- * This function is exported for convenience only and should only be used by
- * library clients looking to make use of wimlib's compression code for another
- * purpose.
- *
- * @param compressed_data
- * Pointer to the compressed data.
- *
- * @param compressed_len
- * Length of the compressed data, in bytes.
- *
- * @param uncompressed_data
- * Pointer to the buffer into which to write the uncompressed data.
- *
- * @param uncompressed_len
- * Length of the uncompressed data. It must be 32768 bytes or less.
- *
- * @return
- * 0 on success; non-zero on failure.
+ * @ingroup G_nonstandalone_wims
+ *
+ * Same as wimlib_join(), but allows specifying a progress function. The
+ * progress function will receive the write progress messages, such as
+ * ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS, while writing the joined WIM. In
+ * addition, if ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY is specified in @p
+ * swm_open_flags, the progress function will receive a series of
+ * ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY messages when each of the split WIM
+ * parts is opened.
*/
extern int
-wimlib_lzx_decompress(const void *compressed_data, unsigned compressed_len,
- void *uncompressed_data, unsigned uncompressed_len);
+wimlib_join_with_progress(const wimlib_tchar * const *swms,
+ unsigned num_swms,
+ const wimlib_tchar *output_path,
+ int swm_open_flags,
+ int wim_write_flags,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
- * Mounts an image in a WIM file on a directory read-only or read-write.
- *
- * As this is implemented using FUSE (Filesystme in UserSpacE), this is not
- * supported if wimlib was configured with @c --without-fuse. This includes
- * Windows builds of wimlib; ::WIMLIB_ERR_UNSUPPORTED will be returned in such
- * cases.
- *
- * Calling this function daemonizes the process, unless
- * ::WIMLIB_MOUNT_FLAG_DEBUG was specified or an early occur occurs. If the
- * mount is read-write (::WIMLIB_MOUNT_FLAG_READWRITE specified), modifications
- * to the WIM are staged in a temporary directory.
- *
- * It is safe to mount multiple images from the same underlying WIM file
- * read-only at the same time, but only if different ::WIMStruct's are used. It
- * is @b not safe to mount multiple images from the same WIM file read-write at
- * the same time.
+ * @ingroup G_mounting_wim_images
*
- * wimlib_mount_image() cannot be used on an image that was exported with
- * wimlib_export_image() while the dentry trees for both images are still in
- * memory. In addition, wimlib_mount_image() may not be used to mount an image
- * that already has modifications pending (e.g. an image added with
- * wimlib_add_image()).
+ * Mounts an image from a WIM file on a directory read-only or read-write.
*
* @param wim
* Pointer to the ::WIMStruct containing the image to be mounted.
* @param image
- * The number of the image to mount, indexed starting from it. It must be
- * an existing, single image.
+ * The 1-based index of the image to mount.
* @param dir
- * The path to an existing empty directory to mount the image on.
+ * The path to an existing empty directory on which to mount the WIM image.
* @param mount_flags
- * Bitwise OR of the flags prefixed with WIMLIB_MOUNT_FLAG.
+ * Bitwise OR of flags prefixed with WIMLIB_MOUNT_FLAG. Use
+ * ::WIMLIB_MOUNT_FLAG_READWRITE to request a read-write mount instead of a
+ * read-only mount.
* @param staging_dir
- * If non-NULL, the name of a directory in which the staging directory will
- * be created. Ignored if ::WIMLIB_MOUNT_FLAG_READWRITE is not specified
- * in @p mount_flags. If left @c NULL, the staging directory is created in
- * the same directory as the WIM file that @p wim was originally read from.
+ * If non-NULL, the name of a directory in which a temporary directory for
+ * storing modified or added files will be created. Ignored if
+ * ::WIMLIB_MOUNT_FLAG_READWRITE is not specified in @p mount_flags. If
+ * left @c NULL, the staging directory is created in the same directory as
+ * the WIM file that @p wim was originally read from. The staging
+ * directory is automatically deleted when the image is unmounted.
*
- * @return 0 on success; nonzero on error.
+ * @return 0 on success; nonzero on error. The possible error codes include:
*
* @retval ::WIMLIB_ERR_ALREADY_LOCKED
- * A read-write mount was requested, but an an exclusive advisory lock on
- * the on-disk WIM file could not be acquired because another thread or
- * process has mounted an image from the WIM read-write or is currently
- * modifying the WIM in-place.
+ * An image from the WIM file is already mounted read-write, or another
+ * process is currently appending data to the WIM file.
* @retval ::WIMLIB_ERR_FUSE
- * A non-zero status was returned by @c fuse_main().
+ * A non-zero status code was returned by @c fuse_main().
* @retval ::WIMLIB_ERR_INVALID_IMAGE
* @p image does not specify an existing, single image in @p wim.
* @retval ::WIMLIB_ERR_INVALID_PARAM
- * @p image is shared among multiple ::WIMStruct's as a result of a call to
- * wimlib_export_image(), or @p image has been added with
- * wimlib_add_image().
+ * @p wim was @c NULL; or @p dir was NULL or an empty string; or an
+ * unrecognized flag was specified in @p mount_flags; or the WIM image has
+ * already been modified in memory (e.g. by wimlib_update_image()).
* @retval ::WIMLIB_ERR_MKDIR
* ::WIMLIB_MOUNT_FLAG_READWRITE was specified in @p mount_flags, but the
* staging directory could not be created.
- * @retval ::WIMLIB_ERR_NOTDIR
- * Could not determine the current working directory.
- * @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
- * One of the dentries in the image referenced a stream not present in the
- * WIM's lookup table (or in any of the lookup tables of the split WIM
- * parts).
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
- * ::WIMLIB_MOUNT_FLAG_READWRITE was specified in @p mount_flags, but @p
- * wim is considered read-only because of any of the reasons mentioned in
- * the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS flag.
+ * ::WIMLIB_MOUNT_FLAG_READWRITE was specified in @p mount_flags, but the
+ * WIM file is considered read-only because of any of the reasons mentioned
+ * in the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS flag.
* @retval ::WIMLIB_ERR_UNSUPPORTED
- * Mounting is not supported, either because the platform is Windows, or
- * because the platform is UNIX-like and wimlib was compiled with @c
- * --without-fuse.
+ * Mounting is not supported in this build of the library.
*
* This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
* ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
* ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
* ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
* different reasons) to read the metadata resource for the image to mount.
+ *
+ * The ability to mount WIM image is implemented using FUSE (Filesystem in
+ * UserSpacE). Depending on how FUSE is set up on your system, this function
+ * may work as normal users in addition to the root user.
+ *
+ * Mounting WIM images is not supported if wimlib was configured
+ * <code>--without-fuse</code>. This includes Windows builds of wimlib;
+ * ::WIMLIB_ERR_UNSUPPORTED will be returned in such cases.
+ *
+ * Calling this function daemonizes the process, unless
+ * ::WIMLIB_MOUNT_FLAG_DEBUG was specified or an early error occurs.
+ *
+ * It is safe to mount multiple images from the same underlying WIM file
+ * read-only at the same time, but only if different ::WIMStruct's are used. It
+ * is @b not safe to mount multiple images from the same WIM file read-write at
+ * the same time.
+ *
+ * To unmount the image, call wimlib_unmount_image(). This may be done in a
+ * different process.
*/
extern int
wimlib_mount_image(WIMStruct *wim,
const wimlib_tchar *staging_dir);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Opens a WIM file and creates a ::WIMStruct for it.
*
* @param wim_file
* @param open_flags
* Bitwise OR of flags prefixed with WIMLIB_OPEN_FLAG.
*
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. Currently, the only messages sent
- * will be ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY, and only if
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @p open_flags.
- *
* @param wim_ret
* On success, a pointer to an opaque ::WIMStruct for the opened WIM file
* is written to the memory location pointed to by this parameter. The
- * ::WIMStruct can be freed using using wimlib_free() when finished with
+ * ::WIMStruct must be freed using using wimlib_free() when finished with
* it.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_IMAGE_COUNT
- * The WIM is not the non-first part of a split WIM, and the number of
- * metadata resources found in the WIM did not match the image count given
- * in the WIM header, or the number of <IMAGE> elements in the XML
- * data for the WIM did not match the image count given in the WIM header.
+ * The number of metadata resources found in the WIM did not match the
+ * image count specified in the WIM header, or the number of <IMAGE>
+ * elements in the XML data of the WIM did not match the image count
+ * specified in the WIM header.
* @retval ::WIMLIB_ERR_INTEGRITY
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @p open_flags and @p
- * wim_file contains an integrity table, but the SHA1 message digest for a
- * chunk of the WIM does not match the corresponding message digest given
- * in the integrity table.
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @p open_flags and
+ * the WIM contained an integrity table, but the SHA1 message digest for a
+ * chunk of the WIM did not match the corresponding value in the integrity
+ * table.
* @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
- * Resources in @p wim_file are compressed, but the chunk size is not 32768.
+ * The library did not recognize the compression chunk size of the WIM as
+ * valid for its compression type.
* @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
- * The header of @p wim_file says that resources in the WIM are compressed,
- * but the header flag indicating LZX or XPRESS compression is not set.
+ * The library did not recognize the compression type of the WIM.
* @retval ::WIMLIB_ERR_INVALID_HEADER
- * The header of @p wim_file was otherwise invalid.
+ * The header of the WIM was otherwise invalid.
* @retval ::WIMLIB_ERR_INVALID_INTEGRITY_TABLE
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @p open_flags and @p
- * wim_file contains an integrity table, but the integrity table is
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @p open_flags and
+ * the WIM contained an integrity table, but the integrity table was
* invalid.
* @retval ::WIMLIB_ERR_INVALID_LOOKUP_TABLE_ENTRY
- * The lookup table for the WIM contained duplicate entries that are not
- * for metadata resources, or it contained an entry with a SHA1 message
- * digest of all 0's.
+ * The lookup table of the WIM was invalid.
* @retval ::WIMLIB_ERR_INVALID_PARAM
- * @p wim_ret was @c NULL.
+ * @p wim_ret was @c NULL; or, @p wim_file was not a nonempty string.
+ * @retval ::WIMLIB_ERR_IS_SPLIT_WIM
+ * The WIM was a split WIM and ::WIMLIB_OPEN_FLAG_ERROR_IF_SPLIT was
+ * specified in @p open_flags.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocated needed memory.
* @retval ::WIMLIB_ERR_NOT_A_WIM_FILE
- * @p wim_file does not begin with the expected magic characters.
+ * The file did not begin with the magic characters that identify a WIM
+ * file.
* @retval ::WIMLIB_ERR_OPEN
- * Failed to open the file @p wim_file for reading.
+ * Failed to open the WIM file for reading. Some possible reasons: the WIM
+ * file does not exist, or the calling process does not have permission to
+ * open it.
* @retval ::WIMLIB_ERR_READ
- * Failed to read data from @p wim_file.
- * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
- * @p wim_file is a split WIM, but ::WIMLIB_OPEN_FLAG_SPLIT_OK was not
- * specified in @p open_flags.
+ * Failed to read data from the WIM file.
* @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
- * Unexpected end-of-file while reading data from @p wim_file.
+ * Unexpected end-of-file while reading data from the WIM file.
* @retval ::WIMLIB_ERR_UNKNOWN_VERSION
- * A number other than 0x10d00 is written in the version field of the WIM
- * header of @p wim_file. (May be a pre-Vista WIM.)
+ * The WIM version number was not recognized. (May be a pre-Vista WIM.)
+ * @retval ::WIMLIB_ERR_WIM_IS_ENCRYPTED
+ * The WIM cannot be opened because it contains encrypted segments. (It
+ * may be a Windows 8 "ESD" file.)
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
* ::WIMLIB_OPEN_FLAG_WRITE_ACCESS was specified but the WIM file was
* considered read-only because of any of the reasons mentioned in the
* documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS flag.
* @retval ::WIMLIB_ERR_XML
- * The XML data for @p wim_file is invalid.
+ * The XML data of the WIM was invalid.
*/
extern int
wimlib_open_wim(const wimlib_tchar *wim_file,
int open_flags,
- WIMStruct **wim_ret,
- wimlib_progress_func_t progress_func);
+ WIMStruct **wim_ret);
+
+/**
+ * @ingroup G_creating_and_opening_wims
+ *
+ * Same as wimlib_open_wim(), but allows specifying a progress function and
+ * progress context. If successful, the progress function will be registered in
+ * the newly open ::WIMStruct, as if by an automatic call to
+ * wimlib_register_progress_function(). In addition, if
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY is specified in @p open_flags, the
+ * progress function will receive ::WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY
+ * messages while checking the WIM file's integrity.
+ */
+extern int
+wimlib_open_wim_with_progress(const wimlib_tchar *wim_file,
+ int open_flags,
+ WIMStruct **wim_ret,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Overwrites the file that the WIM was originally read from, with changes made.
* This only makes sense for ::WIMStruct's obtained from wimlib_open_wim()
* rather than wimlib_create_new_wim().
* rebuild. In this mode, the new WIM is written to a temporary file and then
* renamed to the original file after it is has been completely written. The
* temporary file is made in the same directory as the original WIM file. A
- * full rebuild may take a while, but can be used even if images have been
- * modified or deleted, will produce a WIM with no holes, and has little chance
- * of unintentional data loss because the temporary WIM is fsync()ed before
- * being renamed to the original WIM.
+ * full rebuild may take a while, but it will save space by producing a WIM with
+ * no "holes".
*
* The second way to overwrite a WIM is by appending to the end of it and
* overwriting the header. This can be much faster than a full rebuild, but the
* ::WIMLIB_WRITE_FLAG_SOFT_DELETE to request the in-place overwrite even if
* images have been deleted from the WIM.
*
- * In the temporary-file overwrite mode, no changes are made to the WIM on
- * failure, and the temporary file is deleted if possible. Abnormal termination
- * of the program will result in the temporary file being orphaned. In the
- * direct append mode, the WIM is truncated to the original length on failure;
- * and while abnormal termination of the program will result in extra data
- * appended to the original WIM, it should still be a valid WIM.
- *
* If this function completes successfully, no more functions should be called
- * on @p wim other than wimlib_free(). You must use wimlib_open_wim() to read
- * the WIM file anew.
+ * on @p wim other than wimlib_free(). If you need to continue using the WIM,
+ * you must use wimlib_open_wim() to read it anew.
*
* @param wim
* Pointer to the ::WIMStruct for the WIM file to write. There may have
* @param write_flags
* Bitwise OR of relevant flags prefixed with WIMLIB_WRITE_FLAG.
* @param num_threads
- * Number of threads to use for compression (see wimlib_write()).
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
+ * Number of threads to use for compression, or 0 for the default. (See
+ * wimlib_write().)
*
* @return 0 on success; nonzero on error. This function may return most error
* codes returned by wimlib_write() as well as the following error codes:
* because another thread or process has mounted an image from the WIM
* read-write or is currently modifying the WIM in-place.
* @retval ::WIMLIB_ERR_NO_FILENAME
- * @p wim corresponds to a WIM created with wimlib_create_new_wim() rather
- * than a WIM read with wimlib_open_wim().
+ * @p wim corresponds to a ::WIMStruct created with wimlib_create_new_wim()
+ * rather than a WIM read with wimlib_open_wim().
* @retval ::WIMLIB_ERR_RENAME
* The temporary file that the WIM was written to could not be renamed to
* the original filename of @p wim.
* The WIM file is considered read-only because of any of the reasons
* mentioned in the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS
* flag.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN, and
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_END.
*/
extern int
-wimlib_overwrite(WIMStruct *wim, int write_flags, unsigned num_threads,
- wimlib_progress_func_t progress_func);
+wimlib_overwrite(WIMStruct *wim, int write_flags, unsigned num_threads);
/**
+ * @ingroup G_wim_information
+ *
* Prints information about one image, or all images, contained in a WIM.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file.
+ * Pointer to the ::WIMStruct to query. This need not represent a
+ * standalone WIM (e.g. it could represent part of a split WIM).
* @param image
* The image about which to print information. Can be the number of an
* image, or ::WIMLIB_ALL_IMAGES to print information about all images in the
wimlib_print_available_images(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Deprecated in favor of wimlib_get_wim_info(), which provides the information
* in a way that can be accessed programatically.
*/
wimlib_print_header(const WIMStruct *wim) _wimlib_deprecated;
/**
- * Deprecated in favor of wimlib_iterate_dir_tree(), which provides the
- * information in a way that can be accessed programatically.
- */
-extern int
-wimlib_print_metadata(WIMStruct *wim, int image) _wimlib_deprecated;
-
-/**
+ * @ingroup G_nonstandalone_wims
+ *
* Reference resources from other WIM files or split WIM parts. This function
* can be used on WIMs that are not standalone, such as split or "delta" WIMs,
* to load needed resources (that is, "streams" keyed by SHA1 message digest)
* @param open_flags
* Additional open flags, such as ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY, to
* pass to internal calls to wimlib_open_wim() on the reference files.
- * Note: ::WIMLIB_OPEN_FLAG_SPLIT_OK will be supplied regardless of this
- * parameter.
- * @param progress_func
- * Passed to internal calls to wimlib_open_wim() on the reference files.
*
* @return 0 on success; nonzero on error.
*
const wimlib_tchar * const *resource_wimfiles_or_globs,
unsigned count,
int ref_flags,
- int open_flags,
- wimlib_progress_func_t progress_func);
+ int open_flags);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Similar to wimlib_reference_resource_files(), but operates at a lower level
* where the caller must open the ::WIMStruct for each referenced file itself.
*
unsigned num_resource_wims, int ref_flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Declares that a newly added image is mostly the same as a prior image, but
* captured at a later point in time, possibly with some modifications in the
* intervening time. This is designed to be used in incremental backups of the
* of the directory tree being captured.
* @param flags
* Reserved; must be 0.
- * @param progress_func
- * Currently ignored, but reserved for a function that will be called with
- * information about the operation. Use NULL if no additional information
- * is desired.
*
* @return 0 on success; nonzero on error.
*
extern int
wimlib_reference_template_image(WIMStruct *wim, int new_image,
WIMStruct *template_wim, int template_image,
- int flags, wimlib_progress_func_t progress_func);
+ int flags);
+
+/**
+ * @ingroup G_general
+ *
+ * Registers a progress function with a ::WIMStruct.
+ *
+ * @param wim
+ * The ::WIMStruct for which to register the progress function.
+ * @param progfunc
+ * Pointer to the progress function to register. If the WIM already has a
+ * progress function registered, it will be replaced with this one. If @p
+ * NULL, the current progress function (if any) will be unregistered.
+ * @param progctx
+ * The value which will be passed as the third argument to calls to @p
+ * progfunc.
+ */
+extern void
+wimlib_register_progress_function(WIMStruct *wim,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
+
+/**
+ * @ingroup G_modifying_wims
+ *
+ * Rename the @p source_path to the @p dest_path in the specified @p image of
+ * the @p wim.
+ *
+ * This just builds an appropriate ::wimlib_rename_command and passes it to
+ * wimlib_update_image().
+ */
+extern int
+wimlib_rename_path(WIMStruct *wim, int image,
+ const wimlib_tchar *source_path, const wimlib_tchar *dest_path);
/**
+ * @ingroup G_wim_information
+ *
* Translates a string specifying the name or number of an image in the WIM into
* the number of the image. The images are numbered starting at 1.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image_name_or_num
* A string specifying the name or number of an image in the WIM. If it
* parses to a positive integer, this integer is taken to specify the
const wimlib_tchar *image_name_or_num);
/**
+ * @ingroup G_general
+ *
+ * Sets the file to which the library will print error and warning messages.
+ *
+ * This version of the function takes a C library <c>FILE *</c> opened for
+ * writing (or appending). Use wimlib_set_error_file_by_name() to specify the
+ * file by name instead.
+ *
+ * This also enables error messages, as if by a call to
+ * wimlib_set_print_errors(true).
+ *
+ * @return 0 on success; nonzero on error.
+ * @retval ::WIMLIB_ERR_UNSUPPORTED
+ * wimlib was compiled using the <c>--without-error-messages</c> option.
+ */
+extern int
+wimlib_set_error_file(FILE *fp);
+
+/**
+ * @ingroup G_general
+ *
+ * Sets the path to the file to which the library will print error and warning
+ * messages. The library will open this file for appending.
+ *
+ * This also enables error messages, as if by a call to
+ * wimlib_set_print_errors(true).
+ *
+ * @return 0 on success; nonzero on error.
+ * @retval ::WIMLIB_ERR_OPEN
+ * The file named by @p path could not be opened for appending.
+ * @retval ::WIMLIB_ERR_UNSUPPORTED
+ * wimlib was compiled using the <c>--without-error-messages</c> option.
+ */
+extern int
+wimlib_set_error_file_by_name(const wimlib_tchar *path);
+
+/**
+ * @ingroup G_modifying_wims
+ *
* Changes the description of an image in the WIM.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or part of a split WIM; however, you should set the same
- * description on all parts of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image
* The number of the image for which to change the description.
* @param description
const wimlib_tchar *description);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Set the compression chunk size of a WIM to use in subsequent calls to
+ * wimlib_write() or wimlib_overwrite().
+ *
+ * A larger compression chunk size will likely result in a better compression
+ * ratio, but the speed of random access to the WIM will be reduced.
+ * Furthermore, the effect of a larger compression chunk size is limited by the
+ * size of each stream ("file") being compressed.
+ *
+ * @param wim
+ * ::WIMStruct for a WIM.
+ * @param chunk_size
+ * The chunk size (in bytes) to set. The valid chunk sizes are dependent
+ * on the compression format. See the documentation for each
+ * ::wimlib_compression_type constant for more information. As a special
+ * case, if @p chunk_size is specified as 0, the chunk size is set to the
+ * default for the currently selected output compression type.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
+ * @p chunk_size is not a supported chunk size for the currently selected
+ * output compression type.
+ */
+extern int
+wimlib_set_output_chunk_size(WIMStruct *wim, uint32_t chunk_size);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Similar to wimlib_set_output_chunk_size(), but set the chunk size for writing
+ * packed streams (solid blocks).
+ */
+extern int
+wimlib_set_output_pack_chunk_size(WIMStruct *wim, uint32_t chunk_size);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Set the compression type of a WIM to use in subsequent calls to
+ * wimlib_write() or wimlib_overwrite().
+ *
+ * @param wim
+ * ::WIMStruct for a WIM.
+ * @param ctype
+ * The compression type to set (one of ::wimlib_compression_type). If this
+ * compression type is incompatible with the current output chunk size
+ * (either the default or as set with wimlib_set_output_chunk_size()), the
+ * output chunk size is reset to the default for that compression type.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype did not specify a valid compression type.
+ */
+extern int
+wimlib_set_output_compression_type(WIMStruct *wim, int ctype);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Similar to wimlib_set_output_compression_type(), but set the compression type
+ * for writing packed streams (solid blocks).
+ */
+extern int
+wimlib_set_output_pack_compression_type(WIMStruct *wim, int ctype);
+
+/**
+ * @ingroup G_modifying_wims
+ *
* Set basic information about a WIM.
*
* @param wim
- * A WIMStruct for a standalone WIM file.
+ * Pointer to the ::WIMStruct for a WIM.
* @param info
* A struct ::wimlib_wim_info that contains the information to set. Only
* the information explicitly specified in the @p which flags need be
int which);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes what is written in the \<FLAGS\> element in the WIM XML data
* (something like "Core" or "Ultimate")
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or part of a split WIM; however, you should set the same
- * \<FLAGS\> element on all parts of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image
* The number of the image for which to change the description.
* @param flags
wimlib_set_image_flags(WIMStruct *wim, int image, const wimlib_tchar *flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the name of an image in the WIM.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or part of a split WIM; however, you should set the same
- * name on all parts of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image
* The number of the image for which to change the name.
* @param name
wimlib_set_image_name(WIMStruct *wim, int image, const wimlib_tchar *name);
/**
+ * @ingroup G_general
+ *
* Set the functions that wimlib uses to allocate and free memory.
*
* These settings are global and not per-WIM.
* library.
*
* Please note that some external functions, such as those in @c libntfs-3g, may
- * use the standard memory allocation functions.
+ * use the standard memory allocation functions regardless of this setting.
*
* @param malloc_func
* A function equivalent to @c malloc() that wimlib will use to allocate
* A function equivalent to @c realloc() that wimlib will use to reallocate
* memory. If @c NULL, the free function is set back to the default @c
* realloc() from the C library.
- * @return 0 on success; nonzero on error.
- * @retval ::WIMLIB_ERR_UNSUPPORTED
- * wimlib was compiled with the @c --without-custom-memory-allocator flag,
- * so custom memory allocators are unsupported.
+ * @return 0
*/
extern int
wimlib_set_memory_allocator(void *(*malloc_func)(size_t),
void *(*realloc_func)(void *, size_t));
/**
+ * @ingroup G_general
+ *
* Sets whether wimlib is to print error messages to @c stderr when a function
* fails. These error messages may provide information that cannot be
* determined only from the error code that is returned. Not every error will
wimlib_set_print_errors(bool show_messages);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Splits a WIM into multiple parts.
*
* @param wim
- * The ::WIMStruct for the WIM to split. It must be a standalone, one-part
- * WIM.
+ * The ::WIMStruct for the WIM to split.
* @param swm_name
* Name of the SWM file to create. This will be the name of the first
* part. The other parts will have the same name with 2, 3, 4, ..., etc.
* Bitwise OR of relevant flags prefixed with @c WIMLIB_WRITE_FLAG. These
* flags will be used to write each split WIM part. Specify 0 here to get
* the default behavior.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation
- * (::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART and
- * ::WIMLIB_PROGRESS_MSG_SPLIT_END_PART).
*
* @return 0 on success; nonzero on error. This function may return most error
* codes that can be returned by wimlib_write() as well as the following error
* @retval ::WIMLIB_ERR_INVALID_PARAM
* @p swm_name was not a nonempty string, or @p part_size was 0.
*
- * Note: the WIM's uncompressed and compressed resources are not checksummed
- * when they are copied from the joined WIM to the split WIM parts, nor are
- * compressed resources re-compressed (unless explicitly requested with
- * ::WIMLIB_WRITE_FLAG_RECOMPRESS).
+ * If a progress function is registered with @p wim, for each split WIM part
+ * that is written it will receive the messages
+ * ::WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART and
+ * ::WIMLIB_PROGRESS_MSG_SPLIT_END_PART.
*/
extern int
wimlib_split(WIMStruct *wim,
const wimlib_tchar *swm_name,
uint64_t part_size,
- int write_flags,
- wimlib_progress_func_t progress_func);
+ int write_flags);
/**
- * Unmounts a WIM image that was mounted using wimlib_mount_image().
+ * @ingroup G_general
*
- * The image to unmount is specified by the path to the mountpoint, not the
- * original ::WIMStruct passed to wimlib_mount_image(), which should not be
- * touched and also may have been allocated in a different process.
+ * Perform verification checks on a WIM file.
*
- * To unmount the image, the thread calling this function communicates with the
- * thread that is managing the mounted WIM image. This function blocks until it
- * is known whether the unmount succeeded or failed. In the case of a
- * read-write mounted WIM, the unmount is not considered to have succeeded until
- * all changes have been saved to the underlying WIM file.
+ * @param wim
+ * The ::WIMStruct for the WIM file to verify. Note: for an extra layer of
+ * verification, it is a good idea to have used
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY when you opened the file.
+ * <br/>
+ * If verifying a split WIM, specify the first part of the split WIM here,
+ * and reference the other parts using wimlib_reference_resource_files()
+ * before calling this function.
+ *
+ * @param verify_flags
+ * Reserved; must be 0.
+ *
+ * @retval 0 if the WIM file was successfully verified; nonzero if it failed
+ * verification or another error occurred. Some of the possible error codes
+ * are:
+ *
+ * @retval ::WIMLIB_ERR_DECOMPRESSION
+ * A compressed resource could not be decompressed.
+ * @retval ::WIMLIB_ERR_INVALID_METADATA_RESOURCE
+ * The metadata resource for an image is invalid.
+ * @retval ::WIMLIB_ERR_INVALID_RESOURCE_HASH
+ * One of the files did not decompress to its original data, as given by a
+ * cryptographic checksum.
+ * @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
+ * One of the files referenced by an image could not be located.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * following progress messages: ::WIMLIB_PROGRESS_MSG_BEGIN_VERIFY_IMAGE,
+ * ::WIMLIB_PROGRESS_MSG_END_VERIFY_IMAGE, and
+ * ::WIMLIB_PROGRESS_MSG_VERIFY_STREAMS.
+ */
+extern int
+wimlib_verify_wim(WIMStruct *wim, int verify_flags);
+
+/**
+ * @ingroup G_mounting_wim_images
+ *
+ * Unmounts a WIM image that was mounted using wimlib_mount_image().
+ *
+ * When unmounting a read-write mounted image, the default behavior is to
+ * discard changes to the image. Use ::WIMLIB_UNMOUNT_FLAG_COMMIT to cause the
+ * WIM image to be committed.
*
* @param dir
- * The directory that the WIM image was mounted on.
+ * The directory the WIM image was mounted on.
* @param unmount_flags
- * Bitwise OR of the flags ::WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY,
- * ::WIMLIB_UNMOUNT_FLAG_COMMIT, ::WIMLIB_UNMOUNT_FLAG_REBUILD, and/or
- * ::WIMLIB_UNMOUNT_FLAG_RECOMPRESS. None of these flags affect read-only
- * mounts.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. Currently, only
- * ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS will be sent.
+ * Bitwise OR of flags prefixed with @p WIMLIB_UNMOUNT_FLAG.
*
- * @return 0 on success; nonzero on error.
+ * @return 0 on success; nonzero on error. The possible error codes include:
*
- * @retval ::WIMLIB_ERR_DELETE_STAGING_DIR
- * The filesystem daemon was unable to remove the staging directory and the
- * temporary files that it contains.
- * @retval ::WIMLIB_ERR_FILESYSTEM_DAEMON_CRASHED
- * The filesystem daemon appears to have terminated before sending an exit
- * status.
- * @retval ::WIMLIB_ERR_FORK
- * Could not @c fork() the process.
- * @retval ::WIMLIB_ERR_FUSERMOUNT
- * The @b fusermount program could not be executed or exited with a failure
- * status.
+ * @retval ::WIMLIB_ERR_NOT_A_MOUNTPOINT
+ * There is no WIM image mounted on the specified directory.
+ * @retval ::WIMLIB_ERR_MOUNTED_IMAGE_IS_BUSY
+ * The read-write mounted WIM image cannot be committed because there are
+ * file descriptors open to it, and ::WIMLIB_UNMOUNT_FLAG_FORCE was not
+ * specified.
* @retval ::WIMLIB_ERR_MQUEUE
- * Could not open a POSIX message queue to communicate with the filesystem
- * daemon servicing the mounted filesystem, could not send a message
- * through the queue, or could not receive a message through the queue.
- * @retval ::WIMLIB_ERR_NOMEM
- * Failed to allocate needed memory.
- * @retval ::WIMLIB_ERR_OPEN
- * The filesystem daemon could not open a temporary file for writing the
- * new WIM.
- * @retval ::WIMLIB_ERR_READ
- * A read error occurred when the filesystem daemon tried to a file from
- * the staging directory
- * @retval ::WIMLIB_ERR_RENAME
- * The filesystem daemon failed to rename the newly written WIM file to the
- * original WIM file.
+ * Could not create a POSIX message queue.
+ * @retval ::WIMLIB_ERR_NOT_PERMITTED_TO_UNMOUNT
+ * The WIM image was mounted by a different user.
* @retval ::WIMLIB_ERR_UNSUPPORTED
- * Mounting is not supported, either because the platform is Windows, or
- * because the platform is UNIX-like and wimlib was compiled with @c
- * --without-fuse.
- * @retval ::WIMLIB_ERR_WRITE
- * A write error occurred when the filesystem daemon was writing to the new
- * WIM file, or the filesystem daemon was unable to flush changes that had
- * been made to files in the staging directory.
+ * Mounting is not supported in this build of the library.
+ *
+ * Note: you can also unmount the image by using the @c umount() system call, or
+ * by using the @c umount or @c fusermount programs. However, you need to call
+ * this function if you want changes to be committed.
+ */
+extern int
+wimlib_unmount_image(const wimlib_tchar *dir, int unmount_flags);
+
+/**
+ * @ingroup G_mounting_wim_images
+ *
+ * Same as wimlib_unmount_image(), but allows specifying a progress function.
+ * If changes are committed from a read-write mount, the progress function will
+ * receive ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS messages.
*/
extern int
-wimlib_unmount_image(const wimlib_tchar *dir,
- int unmount_flags,
- wimlib_progress_func_t progress_func);
+wimlib_unmount_image_with_progress(const wimlib_tchar *dir,
+ int unmount_flags,
+ wimlib_progress_func_t progfunc,
+ void *progctx);
/**
+ * @ingroup G_modifying_wims
+ *
* Update a WIM image by adding, deleting, and/or renaming files or directories.
*
* @param wim
* Number of commands in @p cmds.
* @param update_flags
* ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS or 0.
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
*
- * @return 0 on success; nonzero on error. On failure, some but not all of the
- * update commands may have been executed. No individual update command will
- * have been partially executed. Possible error codes include:
+ * @return 0 on success; nonzero on error. On failure, all update commands will
+ * be rolled back, and no visible changes shall have been made to @p wim.
+ * Possible error codes include:
*
+ * @retval ::WIMLIB_ERR_FVE_LOCKED_VOLUME
+ * Windows-only: One of the "add" commands attempted to add files from an
+ * encrypted BitLocker volume that hasn't yet been unlocked.
* @retval ::WIMLIB_ERR_INVALID_CAPTURE_CONFIG
* The capture configuration structure specified for an add command was
* invalid.
* An unknown operation type was specified in the update commands; or,
* attempted to execute an add command where ::WIMLIB_ADD_FLAG_NTFS was set
* in the @p add_flags, but the same image had previously already been
- * added from a NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
+ * added from an NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
* ::WIMLIB_ADD_FLAG_NORPFIX were specified in the @p add_flags for one add
* command; or, ::WIMLIB_ADD_FLAG_NTFS or ::WIMLIB_ADD_FLAG_RPFIX were
* specified in the @p add_flags for an add command in which @p
int image,
const struct wimlib_update_command *cmds,
size_t num_cmds,
- int update_flags,
- wimlib_progress_func_t progress_func);
+ int update_flags);
/**
- * Writes a standalone WIM to a file.
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Writes a WIM to a file.
*
* This brings in resources from any external locations, such as directory trees
* or NTFS volumes scanned with wimlib_add_image(), or other WIM files via
* wimlib_export_image(), and incorporates them into a new on-disk WIM file.
*
+ * By default, the new WIM file is written as stand-alone. Using the
+ * ::WIMLIB_WRITE_FLAG_SKIP_EXTERNAL_WIMS flag, a "delta" WIM can be written
+ * instead. However, this function cannot directly write a "split" WIM; use
+ * wimlib_split() for that.
+ *
* @param wim
* Pointer to the ::WIMStruct for a WIM. There may have been in-memory
* changes made to it, which are then reflected in the output file.
* @param path
* The path to the file to write the WIM to.
* @param image
- * The 1-based index of the image inside the WIM to write. Use
- * ::WIMLIB_ALL_IMAGES to include all images.
+ * Normally, specify ::WIMLIB_ALL_IMAGES here. This indicates that all
+ * images are to be included in the new on-disk WIM file. If for some
+ * reason you only want to include a single image, specify the index of
+ * that image instead.
* @param write_flags
* Bitwise OR of any of the flags prefixed with @c WIMLIB_WRITE_FLAG.
* @param num_threads
* Number of threads to use for compressing data. If 0, the number of
- * threads is taken to be the number of online processors. Note: if no
- * data compression needs to be done, no additional threads will be created
- * regardless of this parameter (e.g. if writing an uncompressed WIM, or
- * exporting an image from a compressed WIM to another WIM of the same
- * compression type without ::WIMLIB_WRITE_FLAG_RECOMPRESS specified in @p
- * write_flags).
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation. The possible messages are
- * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN,
- * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_END, and
- * ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS.
+ * threads will be set by the library automatically. This chosen value
+ * will generally be the number of online processors, but the
+ * implementation may take into account other information (e.g. available
+ * memory and overall system activity).
*
* @return 0 on success; nonzero on error.
*
* @p image does not specify a single existing image in @p wim, and is not
* ::WIMLIB_ALL_IMAGES.
* @retval ::WIMLIB_ERR_INVALID_RESOURCE_HASH
- * A file that had previously been scanned for inclusion in the WIM by
- * wimlib_add_image() was concurrently modified, so it failed the SHA1
- * message digest check.
+ * A file resource failed a SHA-1 message digest check. This can happen if
+ * a file that had previously been scanned for inclusion in the WIM by was
+ * concurrently modified.
* @retval ::WIMLIB_ERR_INVALID_PARAM
- * @p path was @c NULL.
+ * @p path was not a nonempty string, or invalid flags were passed.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_OPEN
* ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
* ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
* ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
- * different reasons) to read the metadata resource for an image that needed to
- * be written.
+ * different reasons) to read the data from a WIM archive.
+ *
+ * If a progress function is registered with @p wim, it will receive the
+ * messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN, and
+ * ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_END.
*/
extern int
wimlib_write(WIMStruct *wim,
const wimlib_tchar *path,
int image,
int write_flags,
- unsigned num_threads,
- wimlib_progress_func_t progress_func);
+ unsigned num_threads);
/**
- * Since wimlib v1.5.0: Same as wimlib_write(), but write the WIM directly to a
- * file descriptor, which need not be seekable if the write is done in a special
- * pipable WIM format by providing ::WIMLIB_WRITE_FLAG_PIPABLE in @p
- * write_flags. This can, for example, allow capturing a WIM image and
- * streaming it over the network. See the documentation for
- * ::WIMLIB_WRITE_FLAG_PIPABLE for more information about pipable WIMs.
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Same as wimlib_write(), but write the WIM directly to a file descriptor,
+ * which need not be seekable if the write is done in a special pipable WIM
+ * format by providing ::WIMLIB_WRITE_FLAG_PIPABLE in @p write_flags. This can,
+ * for example, allow capturing a WIM image and streaming it over the network.
+ * See @ref subsec_pipable_wims for more information about pipable WIMs.
*
* The file descriptor @p fd will @b not be closed when the write is complete;
* the calling code is responsible for this.
int fd,
int image,
int write_flags,
- unsigned num_threads,
- wimlib_progress_func_t progress_func);
+ unsigned num_threads);
+
+/**
+ * @defgroup G_compression Compression and decompression functions
+ *
+ * @brief Functions for XPRESS, LZX, and LZMS compression and decompression.
+ *
+ * These functions are already used by wimlib internally when appropriate for
+ * reading and writing WIM archives. But they are exported and documented so
+ * that they can be used in other applications or libraries for general-purpose
+ * lossless data compression. They are implemented in highly optimized C code,
+ * using state-of-the-art compression techniques. The main limitation is the
+ * lack of sliding window support; this has, however, allowed the algorithms to
+ * be optimized for block-based compression.
+ *
+ * @{
+ */
+
+/** Opaque compressor handle. */
+struct wimlib_compressor;
+
+/** Opaque decompressor handle. */
+struct wimlib_decompressor;
+
+/**
+ * Set the default compression level for the specified compression type. This
+ * is the compression level that wimlib_create_compressor() assumes if it is
+ * called with @p compression_level specified as 0.
+ *
+ * wimlib's WIM writing code (e.g. wimlib_write()) will pass 0 to
+ * wimlib_create_compressor() internally. Therefore, calling this function will
+ * affect the compression level of any data later written to WIM files using the
+ * specified compression type.
+ *
+ * The initial state, before this function is called, is that all compression
+ * types have a default compression level of 50.
+ *
+ * @param ctype
+ * Compression type for which to set the default compression level, as one
+ * of the ::wimlib_compression_type constants. Or, if this is the special
+ * value -1, the default compression levels for all compression types will
+ * be set.
+ * @param compression_level
+ * The default compression level to set. If 0, the "default default" level
+ * of 50 is restored. Otherwise, a higher value indicates higher
+ * compression, whereas a lower value indicates lower compression. See
+ * wimlib_create_compressor() for more information.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was neither a supported compression type nor -1.
+ */
+extern int
+wimlib_set_default_compression_level(int ctype, unsigned int compression_level);
+
+/**
+ * Returns the approximate number of bytes needed to allocate a compressor with
+ * wimlib_create_compressor() for the specified compression type, maximum block
+ * size, and compression level. @p compression_level may be 0, in which case
+ * the current default compression level for @p ctype is used. Returns 0 if the
+ * compression type is invalid, or the @p max_block_size for that compression
+ * type is invalid.
+ */
+extern uint64_t
+wimlib_get_compressor_needed_memory(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ unsigned int compression_level);
+
+/**
+ * Allocate a compressor for the specified compression type using the specified
+ * parameters. This function is part of wimlib's compression API; it is not
+ * necessary to call this to process a WIM file.
+ *
+ * @param ctype
+ * Compression type for which to create the compressor, as one of the
+ * ::wimlib_compression_type constants.
+ * @param max_block_size
+ * The maximum compression block size to support. This specifies the
+ * maximum allowed value for the @p uncompressed_size parameter of
+ * wimlib_compress() when called using this compressor.
+ * <br/>
+ * Usually, the amount of memory used by the compressor will scale in
+ * proportion to the @p max_block_size parameter.
+ * wimlib_get_compressor_needed_memory() can be used to query the specific
+ * amount of memory that will be required.
+ * <br/>
+ * This parameter must be at least 1 and must be less than or equal to a
+ * compression-type-specific limit.
+ * <br/>
+ * In general, the same value of @p max_block_size must be passed to
+ * wimlib_create_decompressor() when the data is later decompressed.
+ * However, some compression types have looser requirements regarding this.
+ * @param compression_level
+ * The compression level to use. If 0, the default compression level (50,
+ * or another value as set through wimlib_set_default_compression_level())
+ * is used. Otherwise, a higher value indicates higher compression. The
+ * values are scaled so that 10 is low compression, 50 is medium
+ * compression, and 100 is high compression. This is not a percentage;
+ * values above 100 are also valid.
+ * <br/>
+ * Using a higher-than-default compression level can result in a better
+ * compression ratio, but can significantly reduce performance. Similarly,
+ * using a lower-than-default compression level can result in better
+ * performance, but can significantly worsen the compression ratio. The
+ * exact results will depend heavily on the compression type and what
+ * algorithms are implemented for it. If you are considering using a
+ * non-default compression level, you should run benchmarks to see if it is
+ * worthwhile for your application.
+ * <br/>
+ * The compression level does not affect the format of the compressed data.
+ * Therefore, it is a compressor-only parameter and does not need to be
+ * passed to the decompressor.
+ * @param compressor_ret
+ * A location into which to return the pointer to the allocated compressor.
+ * The allocated compressor can be used for any number of calls to
+ * wimlib_compress() before being freed with wimlib_free_compressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p max_block_size was invalid for the compression type, or @p
+ * compressor_ret was @c NULL.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Insufficient memory to allocate the compressor.
+ */
+extern int
+wimlib_create_compressor(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ unsigned int compression_level,
+ struct wimlib_compressor **compressor_ret);
+
+/**
+ * Compress a buffer of data.
+ *
+ * @param uncompressed_data
+ * Buffer containing the data to compress.
+ * @param uncompressed_size
+ * Size, in bytes, of the data to compress. This cannot be greater than
+ * the @p max_block_size with which wimlib_create_compressor() was called.
+ * (If it is, the data will not be compressed and 0 will be returned.)
+ * @param compressed_data
+ * Buffer into which to write the compressed data.
+ * @param compressed_size_avail
+ * Number of bytes available in @p compressed_data.
+ * @param compressor
+ * A compressor previously allocated with wimlib_create_compressor().
+ *
+ * @return
+ * The size of the compressed data, in bytes, or 0 if the data could not be
+ * compressed to @p compressed_size_avail or fewer bytes.
+ */
+extern size_t
+wimlib_compress(const void *uncompressed_data, size_t uncompressed_size,
+ void *compressed_data, size_t compressed_size_avail,
+ struct wimlib_compressor *compressor);
+
+/**
+ * Free a compressor previously allocated with wimlib_create_compressor().
+ *
+ * @param compressor
+ * The compressor to free. If @c NULL, no action is taken.
+ */
+extern void
+wimlib_free_compressor(struct wimlib_compressor *compressor);
/**
- * This function is equivalent to wimlib_lzx_compress(), but instead compresses
- * the data using "XPRESS" compression.
+ * Allocate a decompressor for the specified compression type. This function is
+ * part of wimlib's compression API; it is not necessary to call this to process
+ * a WIM file.
+ *
+ * @param ctype
+ * Compression type for which to create the decompressor, as one of the
+ * ::wimlib_compression_type constants.
+ * @param max_block_size
+ * The maximum compression block size to support. This specifies the
+ * maximum allowed value for the @p uncompressed_size parameter of
+ * wimlib_decompress().
+ * <br/>
+ * In general, this parameter must be the same as the @p max_block_size
+ * that was passed to wimlib_create_compressor() when the data was
+ * compressed. However, some compression types have looser requirements
+ * regarding this.
+ * @param decompressor_ret
+ * A location into which to return the pointer to the allocated
+ * decompressor. The allocated decompressor can be used for any number of
+ * calls to wimlib_decompress() before being freed with
+ * wimlib_free_decompressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p max_block_size was invalid for the compression type, or @p
+ * decompressor_ret was @c NULL.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Insufficient memory to allocate the decompressor.
*/
-extern unsigned
-wimlib_xpress_compress(const void *chunk, unsigned chunk_size, void *out);
+extern int
+wimlib_create_decompressor(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ struct wimlib_decompressor **decompressor_ret);
/**
- * This function is equivalent to wimlib_lzx_decompress(), but instead assumes
- * the data is compressed using "XPRESS" compression.
+ * Decompress a buffer of data.
+ *
+ * @param compressed_data
+ * Buffer containing the data to decompress.
+ * @param compressed_size
+ * Size, in bytes, of the data to decompress.
+ * @param uncompressed_data
+ * Buffer into which to write the uncompressed data.
+ * @param uncompressed_size
+ * Size, in bytes, of the data when uncompressed. This cannot exceed the
+ * @p max_block_size with which wimlib_create_decompressor() was called.
+ * (If it does, the data will not be decompressed and a nonzero value will
+ * be returned.)
+ * @param decompressor
+ * A decompressor previously allocated with wimlib_create_decompressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * No specific error codes are defined; any nonzero value indicates that the
+ * decompression failed. This can only occur if the data is truly invalid;
+ * there will never be transient errors like "out of memory", for example.
+ *
+ * This function requires that the exact uncompressed size of the data be passed
+ * as the @p uncompressed_size parameter. If this is not done correctly,
+ * decompression may fail or the data may be decompressed incorrectly.
*/
extern int
-wimlib_xpress_decompress(const void *compressed_data, unsigned compressed_len,
- void *uncompressed_data, unsigned uncompressed_len);
+wimlib_decompress(const void *compressed_data, size_t compressed_size,
+ void *uncompressed_data, size_t uncompressed_size,
+ struct wimlib_decompressor *decompressor);
+
+/**
+ * Free a decompressor previously allocated with wimlib_create_decompressor().
+ *
+ * @param decompressor
+ * The decompressor to free. If @c NULL, no action is taken.
+ */
+extern void
+wimlib_free_decompressor(struct wimlib_decompressor *decompressor);
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
#endif /* _WIMLIB_H */