*
* This file contains extensive comments for generating documentation with
* Doxygen. The built HTML documentation can be viewed at
- * http://wimlib.sourceforge.net.
+ * http://wimlib.sourceforge.net. Make sure to see the <a
+ * href="modules.html">Modules page</a> to make more sense of the declarations
+ * in this header.
*/
/*
* along with wimlib; if not, see http://www.gnu.org/licenses/.
*/
-/** \mainpage
+/**
+ * @mainpage
*
- * \section intro Introduction
+ * @section sec_intro Introduction
*
- * This is the documentation for the library interface of wimlib 1.5.0, a C
+ * This is the documentation for the library interface of wimlib 1.6.0, a C
* library for creating, modifying, extracting, and mounting files in the
* Windows Imaging Format. This documentation is intended for developers only.
* If you have installed wimlib and want to know how to use the @b wimlib-imagex
* program, please see the README file or manual pages.
*
- * \section installing_and_compiling Installing and Compiling
+ * @section sec_installing_and_compiling Installing and Compiling
*
* wimlib uses the GNU autotools, so, on UNIX-like systems, it should be easy to
* install with <code>configure && make && sudo make install</code>; however,
* wimlib_global_init() can (and in some cases, must) be called. See its
* documentation for more details.
*
- * \section basic_wim_handling_concepts Basic WIM handling concepts
+ * @section sec_basic_wim_handling_concepts Basic WIM handling concepts
*
* wimlib wraps up a WIM file in an opaque ::WIMStruct structure. There are
* two ways to create such a structure: wimlib_open_wim(), which opens a WIM
* file and creates a ::WIMStruct representing it, and wimlib_create_new_wim(),
* which creates a new ::WIMStruct that initially contains no images and does
- * not yet have a backing on-disk file.
+ * not yet have a backing on-disk file. See @ref G_creating_and_opening_wims
+ * for more details.
*
* A WIM file, represented by a ::WIMStruct, contains zero or more images.
* Images can be extracted (or "applied") using wimlib_extract_image(), added
* represented by a ::WIMStruct have no persistent effect until the WIM is
* actually written to an on-disk file. This can be done using wimlib_write(),
* but if the WIM was originally opened using wimlib_open_wim(), then
- * wimlib_overwrite() can be used instead.
+ * wimlib_overwrite() can be used instead. See @ref G_extracting_wims, @ref
+ * G_modifying_wims, and @ref G_writing_and_overwriting_wims for more details.
*
* Note that with this ::WIMStruct abstraction, performing many tasks on WIM
* files is a multi-step process. For example, to add, or "append" an image to
* you can make multiple changes to a WIM and commit them all to the underlying
* file in only one overwrite operation, which is more efficient.
*
- * \section cleaning_up Cleaning up
+ * @section sec_cleaning_up Cleaning up
*
* After you are done with any ::WIMStruct, you can call wimlib_free() to free
* all resources associated with it. Also, when you are completely done with
* using wimlib in your program, you can call wimlib_global_cleanup() to free
* any other resources allocated by the library.
*
- * \section error_handling Error Handling
+ * @section sec_error_handling Error Handling
*
* Most functions in wimlib return 0 on success and a positive error code on
* failure. Use wimlib_get_error_string() to get a string that describes an
* Currently, error messages and strings (as well as all documentation, for that
* matter) are only available in English.
*
- * \section encodings Locales and character encodings
+ * @section sec_encodings Locales and character encodings
*
* To support Windows as well as UNIX-like systems, wimlib's API typically takes
* and returns strings of ::wimlib_tchar, which are in a platform-dependent
* default, wimlib on UNIX will assume the locale is UTF-8 capable unless you
* call wimlib_global_init() after having set your desired locale.
*
- * \section advanced Additional information and features
+ * @section sec_advanced Additional information and features
+ *
+ *
+ * @subsection subsec_mounting_wim_images Mounting WIM images
+ *
+ * See @ref G_mounting_wim_images.
+ *
+ * @subsection subsec_progress_functions Progress Messages
+ *
+ * See @ref G_progress.
+ *
+ * @subsection subsec_non_standalone_wims Non-standalone WIMs
+ *
+ * See @ref G_nonstandalone_wims.
+ *
+ * @subsection subsec_pipable_wims Pipable WIMs
+ *
+ * wimlib supports a special "pipable" WIM format which unfortunately is @b not
+ * compatible with Microsoft's software. To create a pipable WIM, call
+ * wimlib_write(), wimlib_write_to_fd(), or wimlib_overwrite() with
+ * ::WIMLIB_WRITE_FLAG_PIPABLE specified. Pipable WIMs are pipable in both
+ * directions, so wimlib_write_to_fd() can be used to write a pipable WIM to a
+ * pipe, and wimlib_extract_image_from_pipe() can be used to apply an image from
+ * a pipable WIM. wimlib can also transparently open and operate on pipable WIM
+ * s using a seekable file descriptor using the regular function calls (e.g.
+ * wimlib_open_wim(), wimlib_extract_image()).
+ *
+ * See the documentation for the <b>--pipable</b> flag of <b>wimlib-imagex
+ * capture</b> for more information about pipable WIMs.
+ *
+ * @subsection subsec_thread_safety Thread Safety
+ *
+ * wimlib is thread-safe, with the following exceptions:
+ * - Different threads cannot operate on the same ::WIMStruct at the same time;
+ * they must use different ::WIMStruct's.
+ * - You must call wimlib_global_init() in one thread before calling any other
+ * functions.
+ * - wimlib_set_print_errors() and wimlib_set_memory_allocator() both apply globally.
+ * - wimlib_mount_image(), while it can be used to mount multiple WIMs
+ * concurrently in the same process, will daemonize the entire process when it
+ * does so for the first time. This includes changing the working directory
+ * to the root directory.
+ *
+ * @subsection subsec_limitations Limitations
*
- * \subsection image_addition Image addition/capture
+ * This section documents some technical limitations of wimlib not already
+ * documented in the man page for @b wimlib-imagex.
+ *
+ * - The old WIM format from Vista pre-releases is not supported.
+ * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
+ * functionality other than that already present in @b ImageX, that allows you
+ * to make certain Windows-specific modifications to a Windows PE image, such
+ * as adding a driver or Windows component. Such a tool could be implemented
+ * on top of wimlib.
*
- * As described in \ref basic_wim_handling_concepts, capturing a new WIM or
+ * @subsection more_info More information
+ *
+ * You are advised to read the README as well as the manual pages for
+ * <b>wimlib-imagex</b>, since not all relevant information is repeated here in
+ * the API documentation.
+ */
+
+/** @defgroup G_general General
+ *
+ * @brief Declarations and structures shared across the library.
+ */
+
+/** @defgroup G_creating_and_opening_wims Creating and Opening WIMs
+ *
+ * @brief Create new WIMs and open existing WIMs.
+ */
+
+/** @defgroup G_wim_information Retrieving WIM information and directory listings
+ *
+ * @brief Retrieve information about a WIM or WIM image.
+ */
+
+/** @defgroup G_modifying_wims Modifying WIMs
+ *
+ * @brief Make changes to a WIM.
+ *
+ * @section sec_adding_images Capturing and adding WIM images
+ *
+ * As described in @ref sec_basic_wim_handling_concepts, capturing a new WIM or
* appending an image to an existing WIM is a multi-step process, but at its
* core is wimlib_add_image() or an equivalent function. Normally,
* wimlib_add_image() takes an on-disk directory tree and logically adds it to a
* Note that some details of how image addition/capture works are documented
* more fully in the manual page for <b>wimlib-imagex capture</b>.
*
- * \subsection extraction Image extraction/application
+ * @section sec_deleting_images Deleting WIM images
+ *
+ * wimlib_delete_image() can delete an image from a ::WIMStruct. But as usual,
+ * wimlib_write() or wimlib_overwrite() must be called to cause the changes to
+ * be made persistent in an on-disk WIM file.
+ *
+ * @section sec_exporting_images Exporting WIM images
+ *
+ * wimlib_export_image() can copy, or "export", an image from one WIM to
+ * another.
+ *
+ * @section sec_other_modifications Other modifications
+ *
+ * wimlib_update_image() can add, delete, and rename files in a WIM image.
+ *
+ * wimlib_set_image_name(), wimlib_set_image_descripton(), and
+ * wimlib_set_image_flags() can change other image metadata.
+ *
+ * wimlib_set_wim_info() can change information about the WIM file itself, such
+ * as the boot index.
+ */
+
+/** @defgroup G_extracting_wims Extracting WIMs
+ *
+ * @brief Extract files, directories, and images from a WIM.
*
* wimlib_extract_image() extracts, or "applies", an image from a WIM
* (represented, as usual, by a ::WIMStruct). This normally extracts the image
* Another function, wimlib_extract_files(), is also provided. It can extract
* certain files or directories from a WIM image, instead of a full image.
*
- * A third function, wimlib_extract_image_from_pipe(), allows an image to be
- * extracted from a pipable WIM sent over a pipe; see \ref pipable_wims.
+ * wimlib_extract_paths() and wimlib_extract_pathlist() allow extracting a set
+ * of paths from a WIM image in a manner that may be easier to use than
+ * wimlib_extract_files(), and also allow wildcard patterns.
+ *
+ * wimlib_extract_image_from_pipe() allows an image to be extracted from a
+ * pipable WIM sent over a pipe; see @ref subsec_pipable_wims.
*
* Note that some details of how image extraction/application works are
* documented more fully in the manual pages for <b>wimlib-imagex apply</b> and
* <b>wimlib-imagex extract</b>.
+ */
+
+/** @defgroup G_mounting_wim_images Mounting WIM images
*
- * \subsection non_standalone_wims Non-standalone WIMs
- *
- * Earlier it was stated that a ::WIMStruct represents a WIM file, but there's a
- * bit more to it than that. Normally, WIM files are "standalone". However,
- * WIM files can also be arranged in non-standalone ways, such as a set of
- * on-disk files that together form a single "split WIM" or "delta WIM". Such
- * arrangements are fully supported by wimlib. However, as a result, in such
- * cases a ::WIMStruct created from one of these on-disk files initially only
- * partially represents the full WIM and needs to, in effect, be logically
- * combined with other ::WIMStruct's before performing certain operations, such
- * as extracting files with wimlib_extract_image() or wimlib_extract_files().
- * This is done by calling wimlib_reference_resource_files() or
- * wimlib_reference_resources().
- *
- * wimlib_write() can create delta WIMs as well as standalone WIMs, but a
- * specialized function (wimlib_split()) is needed to create a split WIM.
- *
- * \subsection mounting_wim_images Mounting WIM images
+ * @brief Mount and unmount WIM images.
*
* On UNIX-like systems supporting FUSE (such as Linux), wimlib supports
* mounting images from WIM files either read-only or read-write. To mount an
* compiled with the <code>--without-fuse</code> flag, these functions will be
* available but will fail with ::WIMLIB_ERR_UNSUPPORTED. Note that mounting an
* image read-write is an alternative to calling wimlib_update_image().
+ */
+
+/** @defgroup G_progress Progress Messages
*
- * \subsection progress_functions Progress Functions
+ * @brief Track the progress of long WIM operations.
*
* When operating on large archives, operations such as extraction will
* naturally take a while to complete. Because of this and to improve the
* function will be called periodically during the WIM operation(s) to report on
* the progress of the operation (for example, how many bytes have been written
* so far).
+ */
+
+/** @defgroup G_writing_and_overwriting_wims Writing and Overwriting WIMs
*
- * \subsection pipable_wims Pipable WIMs
- *
- * wimlib supports a special "pipable" WIM format which unfortunately is @b not
- * compatible with Microsoft's software. To create a pipable WIM, call
- * wimlib_write(), wimlib_write_to_fd(), or wimlib_overwrite() with
- * ::WIMLIB_WRITE_FLAG_PIPABLE specified. Pipable WIMs are pipable in both
- * directions, so wimlib_write_to_fd() can be used to write a pipable WIM to a
- * pipe, and wimlib_extract_image_from_pipe() can be used to apply an image from
- * a pipable WIM. wimlib can also transparently open and operate on pipable WIM
- * s using a seekable file descriptor using the regular function calls (e.g.
- * wimlib_open_wim(), wimlib_extract_image()).
- *
- * See the documentation for the <b>--pipable</b> flag of <b>wimlib-imagex
- * capture</b> for more information about pipable WIMs.
- *
- * \subsection thread_safety Thread Safety
+ * @brief Write and overwrite on-disk WIM files.
*
- * wimlib is thread-safe, with the following exceptions:
- * - Different threads cannot operate on the same ::WIMStruct at the same time;
- * they must use different ::WIMStruct's.
- * - You must call wimlib_global_init() in one thread before calling any other
- * functions.
- * - wimlib_set_print_errors() and wimlib_set_memory_allocator() both apply globally.
- * - wimlib_mount_image(), while it can be used to mount multiple WIMs
- * concurrently in the same process, will daemonize the entire process when it
- * does so for the first time. This includes changing the working directory
- * to the root directory.
+ * As described in @ref sec_basic_wim_handling_concepts, these functions are
+ * critical to the design of the library as they allow new or modified WIMs to
+ * actually be written to on-disk files. Generally, wimlib_write() is the
+ * function you need to call to write a new WIM file, and wimlib_overwrite() is
+ * the function you need to call to persistently update an existing WIM file.
+ */
+
+/** @defgroup G_nonstandalone_wims Creating and handling non-standalone WIMs
*
- * \subsection limitations Limitations
+ * @brief Create and handle non-standalone WIMs, such as split and delta WIMs.
*
- * This section documents some technical limitations of wimlib not already
- * documented in the man page for @b wimlib-imagex.
+ * Normally, ::WIMStruct represents a WIM file, but there's a bit more to it
+ * than that. Normally, WIM files are "standalone". However, WIM files can
+ * also be arranged in non-standalone ways, such as a set of on-disk files that
+ * together form a single "split WIM" or "delta WIM". Such arrangements are
+ * fully supported by wimlib. However, as a result, in such cases a ::WIMStruct
+ * created from one of these on-disk files initially only partially represents
+ * the full WIM and needs to, in effect, be logically combined with other
+ * ::WIMStruct's before performing certain operations, such as extracting files
+ * with wimlib_extract_image() or wimlib_extract_files(). This is done by
+ * calling wimlib_reference_resource_files() or wimlib_reference_resources().
*
- * - The old WIM format from Vista pre-releases is not supported.
- * - Compressed resource chunk sizes other than 32768 are not supported. This
- * doesn't seem to be a real problem because the chunk size always seems to be
- * this value.
- * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
- * functionality other than that already present in @b ImageX, that allows you
- * to make certain Windows-specific modifications to a Windows PE image, such
- * as adding a driver or Windows component. Such a tool could be implemented
- * on top of wimlib.
- *
- * \subsection more_info More information
- *
- * You are advised to read the README as well as the manual pages for
- * <b>wimlib-imagex</b>, since not all relevant information is repeated here in
- * the API documentation.
+ * wimlib_write() can create delta WIMs as well as standalone WIMs, but a
+ * specialized function (wimlib_split()) is needed to create a split WIM.
*/
#ifndef _WIMLIB_H
#include <inttypes.h>
#include <time.h>
-/** Major version of the library (for example, the 1 in 1.2.5). */
+/** @ingroup G_general
+ * @{ */
+
+/** Major version of the library (for example, the 1 in 1.2.5). */
#define WIMLIB_MAJOR_VERSION 1
/** Minor version of the library (for example, the 2 in 1.2.5). */
-#define WIMLIB_MINOR_VERSION 5
+#define WIMLIB_MINOR_VERSION 6
/** Patch version of the library (for example, the 5 in 1.2.5). */
#define WIMLIB_PATCH_VERSION 0
extern "C" {
#endif
+/** @} */
+/** @ingroup G_general
+ * @{ */
+
/**
* Opaque structure that represents a WIM file. This is an in-memory structure
* and need not correspond to a specific on-disk file. However, a ::WIMStruct
*
* Use wimlib_write() or wimlib_overwrite() to actually write an on-disk WIM
* file from a ::WIMStruct.
+ *
+ * See @ref sec_basic_wim_handling_concepts for more information.
*/
#ifndef WIMLIB_WIMSTRUCT_DECLARED
typedef struct WIMStruct WIMStruct;
#ifdef __WIN32__
typedef wchar_t wimlib_tchar;
#else
-/** See \ref encodings */
+/** See @ref sec_encodings */
typedef char wimlib_tchar;
#endif
/** Compressed resources in the WIM use XPRESS compression. */
WIMLIB_COMPRESSION_TYPE_XPRESS = 2,
+
+ /** Compressed resources in the WIM use LZMS compression. Note: LZMS
+ * compression is only compatible with wimlib v1.6.0 and later and with
+ * WIMGAPI Windows 8 and later (and some restrictions apply on the
+ * latter). */
+ WIMLIB_COMPRESSION_TYPE_LZMS = 3,
};
+/** @} */
+/** @ingroup G_progress
+ * @{ */
+
/** Possible values of the first parameter to the user-supplied
* ::wimlib_progress_func_t progress function */
enum wimlib_progress_msg {
* ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN = 0,
- /** A file or directory tree within a WIM image (not the full image) is
- * about to be extracted. @p info will point to
+ /** One or more file or directory trees within a WIM image (not the full
+ * image) is about to be extracted. @p info will point to
* ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
* extracted. @p info will point to ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
- /** The WIM image's files resources are currently being extracted. @p
- * info will point to ::wimlib_progress_info.extract. */
+ /** File data is currently being extracted. @p info will point to
+ * ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
/** Starting to read a new part of a split pipable WIM over the pipe.
* ::wimlib_progress_info.scan. */
WIMLIB_PROGRESS_MSG_SCAN_END,
- /**
- * File resources are currently being written to the WIM.
- * @p info will point to ::wimlib_progress_info.write_streams. */
+ /** File resources ("streams") are currently being written to the WIM.
+ * @p info will point to ::wimlib_progress_info.write_streams. */
WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
/**
* ::wimlib_progress_info.integrity. */
WIMLIB_PROGRESS_MSG_CALC_INTEGRITY,
- /** Reserved. (Previously used for WIMLIB_PROGRESS_MSG_JOIN_STREAMS,
- * but in wimlib v1.5.0 this was removed to simplify the code and now
- * you'll get ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS messages instead.) */
+ /** Reserved. */
WIMLIB_PROGRESS_MSG_RESERVED,
/** A wimlib_split() operation is in progress, and a new split part is
/* N.B. I wanted these to be anonymous structs, but Doxygen won't
* document them if they aren't given a name... */
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS. */
+ /** Valid on the message ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS. This is
+ * the primary message for tracking the progress of writing a WIM file.
+ */
struct wimlib_progress_info_write_streams {
- /** Number of bytes that are going to be written for all the
- * streams combined. This is the amount in uncompressed data.
- * (The actual number of bytes will be less if the data is being
- * written compressed.) */
+ /** Total number of uncompressed bytes of stream data being
+ * written. This can be thought of as the total uncompressed
+ * size of the files being archived, with some caveats. WIM
+ * files use single-instance streams, so the size provided here
+ * only counts distinct streams, except for the following
+ * exception: the size provided here may include the sizes of
+ * all newly added (e.g. with wimlib_add_image() streams,
+ * pending automatic de-duplication during the write operation
+ * itself. When each such stream de-duplication occurs, this
+ * number will be decreased by the size of the duplicate stream
+ * that need not be written.
+ *
+ * In the case of a wimlib_overwrite() that the library opted to
+ * perform in-place, both @p total_streams and @p total_bytes
+ * will only count the streams actually being written and not
+ * pre-existing streams in the WIM file. */
uint64_t total_bytes;
- /** Number of streams that are going to be written. */
+ /** Total number of streams being written. This can be thought
+ * of as the total number of files being archived, with some
+ * caveats. In general, a single file or directory may contain
+ * multiple data streams, each of which will be represented
+ * separately in this number. Furthermore, WIM files use
+ * single-instance streams, so the stream count provided here
+ * only counts distinct streams, except for the following
+ * exception: the stream count provided here may include newly
+ * added (e.g. with wimlib_add_image() streams, pending
+ * automatic de-duplication during the write operation itself.
+ * When each such stream de-duplication occurs, this number will
+ * be decreased by 1 to account for the duplicate stream that
+ * need not be written. */
uint64_t total_streams;
- /** Number of uncompressed bytes that have been written so far.
- * Will be 0 initially, and equal to @p total_bytes at the end.
- * */
+ /** Number of uncompressed bytes of stream data that have been
+ * written so far. This number be 0 initially, and will be
+ * equal to @p total_bytes at the end of the write operation.
+ * Note that @p total_bytes (but not @p completed_bytes) may
+ * decrease throughout the write operation due to the discovery
+ * of stream duplications. */
uint64_t completed_bytes;
- /** Number of streams that have been written. Will be 0
- * initially, and equal to @p total_streams at the end. */
+ /** Number of streams that have been written so far. This
+ * number will be 0 initially, and will be equal to @p
+ * total_streams at the end of the write operation. Note that
+ * @p total_streams (but not @p completed_streams) may decrease
+ * throughout the write operation due to the discovery of stream
+ * duplications.
+ *
+ * For applications that wish to calculate a simple "percent
+ * complete" for the write operation, it will likely be more
+ * accurate to calculate the percentage from @p completed_bytes
+ * and @p total_bytes rather than @p completed_streams and
+ * @p total_streams because the time for the operation to
+ * complete is mainly determined by the number of bytes that
+ * need to be read, compressed, and written, not just the number
+ * of files being archived. */
uint64_t completed_streams;
- /** Number of threads that are being used to compress resources
- * (if applicable). */
- unsigned num_threads;
+ /** Number of threads that are being used to compress streams,
+ * or 1 if streams are being written uncompressed. */
+ uint32_t num_threads;
- /** The compression type being used to write the streams; either
- * ::WIMLIB_COMPRESSION_TYPE_NONE,
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS, or
- * ::WIMLIB_COMPRESSION_TYPE_LZX. */
- int compression_type;
+ /** The compression type being used to write the streams, as one
+ * of the ::wimlib_compression_type constants. */
+ int32_t compression_type;
/** Number of split WIM parts from which streams are being
* written (may be 0 if irrelevant). */
- unsigned total_parts;
+ uint32_t total_parts;
/** Number of split WIM parts from which streams have been
* written (may be 0 if irrelevant). */
- unsigned completed_parts;
+ uint32_t completed_parts;
} write_streams;
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY, and
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
struct wimlib_progress_info_scan {
- /** Directory or NTFS volume that is being scanned. */
+ /** Top-level directory being scanned; or, when capturing a NTFS
+ * volume with ::WIMLIB_ADD_FLAG_NTFS, this is instead the path
+ * to the file or block device that contains the NTFS volume
+ * being scanned. */
const wimlib_tchar *source;
- /** Path to the file or directory that is about to be scanned,
- * relative to the root of the image capture or the NTFS volume.
- * */
+ /** Path to the file (or directory) that has been scanned, valid
+ * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing a NTFS
+ * volume with ::WIMLIB_ADD_FLAG_NTFS, this path will be
+ * relative to the root of the NTFS volume. */
const wimlib_tchar *cur_path;
+ /** Dentry scan status, valid on
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. */
enum {
- /** File or directory looks okay and will be captured. */
+ /** The file looks okay and will be captured. */
WIMLIB_SCAN_DENTRY_OK = 0,
- /** File or directory is being excluded from capture due
- * to the capture configuration file. */
+ /** File is being excluded from capture due to the
+ * capture configuration. */
WIMLIB_SCAN_DENTRY_EXCLUDED,
- /** File or directory is being excluded from capture due
- * to being unsupported (e.g. an encrypted or device
- * file). */
+ /** File is being excluded from capture due to being
+ * unsupported (e.g. an encrypted or device file). */
WIMLIB_SCAN_DENTRY_UNSUPPORTED,
+
+ /** The file is an absolute symbolic link or junction
+ * point and it is being excluded from capture because
+ * it points outside of the capture directory and
+ * reparse-point fixups are enabled. (Reparse point
+ * fixups can be disabled by using the flag
+ * ::WIMLIB_ADD_FLAG_NORPFIX.) */
+ WIMLIB_SCAN_DENTRY_EXCLUDED_SYMLINK,
} status;
- /** Target path in the WIM. Only valid on messages
- * ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
- const wimlib_tchar *wim_target_path;
+ union {
+ /** Target path in the WIM image. Only valid on
+ * messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. If capturing a full
+ * image, this will be the empty string; otherwise it
+ * will name the place in the WIM image at which the
+ * directory tree is being added. */
+ const wimlib_tchar *wim_target_path;
+
+ /** For ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY and a status
+ * of ::WIMLIB_SCAN_DENTRY_EXCLUDED_SYMLINK, this is the
+ * target of the absolute symbolic link or junction
+ * point. */
+ const wimlib_tchar *symlink_target;
+ };
+
+ /** Number of directories scanned so far, including the root
+ * directory but excluding any unsupported/excluded directories.
+ *
+ * Details: On Windows and in NTFS capture mode, a reparse point
+ * counts as a directory if and only if it has
+ * FILE_ATTRIBUTE_DIRECTORY set. Otherwise, a symbolic link
+ * counts as a directory if and only if when fully dereferenced
+ * it points to an accessible directory. If a file has multiple
+ * names (hard links), it is only counted one time. */
+ uint64_t num_dirs_scanned;
+
+ /** Number of non-directories scanned so far, excluding any
+ * unsupported/excluded files.
+ *
+ * Details: On Windows and in NTFS capture mode, a reparse point
+ * counts as a non-directory if and only if it does not have
+ * FILE_ATTRIBUTE_DIRECTORY set. Otherwise, a symbolic link
+ * counts as a non-directory if and only if when fully
+ * dereferenced it points to a non-directory or its target is
+ * inaccessible. If a file has multiple names (hard links), it
+ * is only counted one time. */
+ uint64_t num_nondirs_scanned;
+
+ /** Number of bytes of file data that have been detected so far.
+ *
+ * Details: This data may not actually have been read yet, and
+ * it will not actually be written to the WIM file until
+ * wimlib_write() or wimlib_overwrite() has been called. Data
+ * from excluded files is not counted. This number includes
+ * default file contents as well as named data streams and
+ * reparse point data. The size of reparse point data is
+ * tallied after any reparse-point fixups, and in the case of
+ * capturing a symbolic link on a UNIX-like system, the creation
+ * of the reparse point data itself. If a file has multiple
+ * names (hard links), its size(s) are only counted one time.
+ * On Windows, encrypted files have their encrypted size
+ * counted, not their unencrypted size; however, compressed
+ * files have their uncompressed size counted. */
+ uint64_t num_bytes_scanned;
} scan;
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
+ /** Valid on messages
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS, and
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END. */
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END, and
+ * ::WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS.
+ *
+ * Note: most of the time of an extraction operation will be spent
+ * extracting streams, and the application will receive
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS during this time. Using @p
+ * completed_bytes and @p total_bytes, the application can calculate a
+ * percentage complete. However, note that this message does not, in
+ * general, actually provide information about which "file" is currently
+ * being extracted. This is because wimlib, by default, extracts the
+ * individual data streams in whichever order it determines to be the
+ * most efficient. */
struct wimlib_progress_info_extract {
- /** Number of the image being extracted (1-based). */
+ /** Number of the image from which files are being extracted
+ * (1-based). */
int image;
- /** Flags passed to to wimlib_extract_image() */
+ /** Extraction flags being used. */
int extract_flags;
- /** Full path to the WIM file being extracted. */
+ /** Full path to the WIM file from which files are being
+ * extracted, or @c NULL if the WIMStruct has no associated
+ * on-disk file. */
const wimlib_tchar *wimfile_name;
- /** Name of the image being extracted. */
+ /** Name of the image from which files are being extracted, or
+ * the empty string if the image is unnamed. */
const wimlib_tchar *image_name;
- /** Directory or NTFS volume to which the image is being
- * extracted. */
+ /** Path to the directory or NTFS volume to which the files are
+ * being extracted. */
const wimlib_tchar *target;
/** Reserved. */
- const wimlib_tchar *cur_path;
+ const wimlib_tchar *reserved;
/** Number of bytes of uncompressed data that will be extracted.
- * Takes into account hard links (they are not counted for each
- * link.) */
+ * If a file has multiple names (hard links), its size (or
+ * sizes, in the case of named data streams) is only counted one
+ * time. For "reparse points" and symbolic links, the size to
+ * be extracted is the size of the reparse data buffer.
+ *
+ * This number will stay constant throughout the extraction. */
uint64_t total_bytes;
- /** Number of bytes that have been written so far. Will be 0
- * initially, and equal to @p total_bytes at the end. */
+ /** Number of bytes of uncompressed data that have been
+ * extracted so far. This initially be 0 and will equal to @p
+ * total_bytes at the end of the extraction. */
uint64_t completed_bytes;
- /** Number of streams that will be extracted. This may more or
- * less than the number of "files" to be extracted due to
- * special cases (hard links, symbolic links, and alternate data
- * streams.) */
+ /** Number of (not necessarily unique) streams that will be
+ * extracted. This may be more or less than the number of
+ * "files" to be extracted due to hard links as well as
+ * potentially multiple streams per file (named data streams).
+ * A "stream" may be the default contents of a file, a named
+ * data stream, or a reparse data buffer. */
uint64_t num_streams;
- /** Path to the root dentry within the WIM for the tree that is
- * being extracted. Will be the empty string when extracting a
- * full image. */
+ /** When extracting files using wimlib_extract_files(), this
+ * will be the path within the WIM image to the file or
+ * directory tree currently being extracted. Otherwise, this
+ * will be the empty string. */
const wimlib_tchar *extract_root_wim_source_path;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
-
unsigned part_number;
/** Currently only used for
typedef int (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
const union wimlib_progress_info *info);
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
+
/** An array of these structures is passed to wimlib_add_image_multisource() to
* specify the sources from which to create a WIM image. */
struct wimlib_capture_source {
* reparse-point fixups by default when capturing or applying WIM images. */
#define WIMLIB_CHANGE_RPFIX_FLAG 0x00000008
+/** @} */
+/** @ingroup G_wim_information
+ * @{ */
+
/** General information about a WIM file. */
struct wimlib_wim_info {
uint32_t reserved[9];
};
-/** Information about a unique resource in the WIM file.
- */
+/** Information about a unique stream in the WIM file. (A stream is the same
+ * thing as a "resource", except in the case of packed resources.) */
struct wimlib_resource_entry {
- /** Uncompressed size of the resource in bytes. */
+ /** Uncompressed size of the stream in bytes. */
uint64_t uncompressed_size;
- /** Compressed size of the resource in bytes. This will be the same as
- * @p uncompressed_size if the resource is uncompressed. */
+ /** Compressed size of the stream in bytes. This will be the same as @p
+ * uncompressed_size if the stream is uncompressed. Or, if @p
+ * is_packed_streams is 1, this will be 0. */
uint64_t compressed_size;
- /** Offset, in bytes, of this resource from the start of the WIM file.
+ /** Offset, in bytes, of this stream from the start of the WIM file. Or
+ * if @p packed is 1, then this is actually the offset at which this
+ * stream begins in the uncompressed contents of the packed resource.
*/
uint64_t offset;
- /** SHA1 message digest of the resource's uncompressed contents. */
+ /** SHA1 message digest of the stream's uncompressed contents. */
uint8_t sha1_hash[20];
- /** Which part number of the split WIM this resource is in. This should
+ /** Which part number of the split WIM this stream is in. This should
* be the same as the part number provided by wimlib_get_wim_info(). */
uint32_t part_number;
- /** Number of times this resource is referenced over all WIM images. */
+ /** Number of times this stream is referenced over all WIM images. */
uint32_t reference_count;
- /** 1 if this resource is compressed. */
+ /** 1 if this stream is compressed. */
uint32_t is_compressed : 1;
- /** 1 if this resource is a metadata resource rather than a file
- * resource. */
+ /** 1 if this stream is a metadata resource rather than a file resource.
+ * */
uint32_t is_metadata : 1;
uint32_t is_free : 1;
uint32_t is_spanned : 1;
- /** 1 if this resource was not found in the lookup table of the
+ /** 1 if this stream was not found in the lookup table of the
* ::WIMStruct. This normally implies a missing call to
* wimlib_reference_resource_files() or wimlib_reference_resources().
- */
+ * */
uint32_t is_missing : 1;
- uint32_t reserved_flags : 27;
- uint64_t reserved[4];
+ /** 1 if this stream is located in a packed resource which may contain
+ * other streams (all compressed together) as well. */
+ uint32_t packed : 1;
+
+ uint32_t reserved_flags : 26;
+
+ /** If @p packed is 1, then this will specify the offset of the packed
+ * resource in the WIM. */
+ uint64_t raw_resource_offset_in_wim;
+
+ /** If @p is_packed_streams is 1, then this will specify the compressed
+ * size of the packed resource in the WIM. */
+ uint64_t raw_resource_compressed_size;
+
+ uint64_t reserved[2];
};
/** A stream of a file in the WIM. */
typedef int (*wimlib_iterate_lookup_table_callback_t)(const struct wimlib_resource_entry *resource,
void *user_ctx);
-/**
- * @name Directory tree iteration flags
- *
- * The following flags can be passed to wimlib_iterate_dir_tree().
- *
- * @{
- */
-
/** For wimlib_iterate_dir_tree(): Iterate recursively on children rather than
* just on the specified path. */
#define WIMLIB_ITERATE_DIR_TREE_FLAG_RECURSIVE 0x00000001
#define WIMLIB_ITERATE_DIR_TREE_FLAG_RESOURCES_NEEDED 0x00000004
-/**
- * @name Add flags
- *
- * The following flags can be passed to wimlib_add_image(),
- * wimlib_add_image_multisource(), and add commands passed to
- * wimlib_update_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Directly capture a NTFS volume rather than a generic directory. This flag
* cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
#define WIMLIB_ADD_FLAG_DEREFERENCE 0x00000002
/** Call the progress function with the message
- * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file is starting to
- * be scanned, or when a directory or file is being excluded from capture. */
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file has been
+ * scanned. */
#define WIMLIB_ADD_FLAG_VERBOSE 0x00000004
/** Mark the image being added as the bootable image of the WIM. */
/** Store the UNIX owner, group, and mode. This is done by adding a special
* alternate data stream to each regular file, symbolic link, and directory to
* contain this information. Please note that this flag is for convenience
- * only; Microsoft's @a imagex.exe will not understand this special information.
- * This flag cannot be combined with ::WIMLIB_ADD_FLAG_NTFS. */
+ * only; Microsoft's implementation will not understand this special
+ * information. This flag cannot be combined with ::WIMLIB_ADD_FLAG_NTFS. */
#define WIMLIB_ADD_FLAG_UNIX_DATA 0x00000010
/** Do not capture security descriptors. Only has an effect in NTFS capture
- * mode, or in Win32 native builds. */
+ * mode, or in Windows native builds. */
#define WIMLIB_ADD_FLAG_NO_ACLS 0x00000020
/** Fail immediately if the full security descriptor of any file or directory
- * cannot be accessed. Only has an effect in Win32 native builds. The default
- * behavior without this flag is to first try omitting the SACL from the
+ * cannot be accessed. Only has an effect in Windows native builds. The
+ * default behavior without this flag is to first try omitting the SACL from the
* security descriptor, then to try omitting the security descriptor entirely.
* */
#define WIMLIB_ADD_FLAG_STRICT_ACLS 0x00000040
WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE
#define WIMLIB_ADD_IMAGE_FLAG_WINCONFIG WIMLIB_ADD_FLAG_WINCONFIG
-/**
- * @name Delete flags
- *
- * The following flags can be specified in delete commands passed to
- * wimlib_update_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Do not issue an error if the path to delete does not exist. */
#define WIMLIB_DELETE_FLAG_FORCE 0x00000001
* issued if the path to delete is a directory. */
#define WIMLIB_DELETE_FLAG_RECURSIVE 0x00000002
-/**
- * @name Export flags
- *
- * The following flags can be passed to wimlib_export_image().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/**
* If a single image is being exported, mark it bootable in the destination WIM.
/** Give the exported image(s) no descriptions. */
#define WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS 0x00000004
-/**
- * @name Extract flags
- *
- * The following flags can be passed to wimlib_extract_image(),
- * wimlib_extract_files(), and wimlib_extract_image_from_pipe().
- *
- * @{
- */
+/** @} */
+/** @ingroup G_extracting_wims
+ * @{ */
/** Extract the image directly to a NTFS volume rather than a generic directory.
* This mode is only available if wimlib was compiled with libntfs-3g support;
/** This flag no longer does anything but is reserved for future use. */
#define WIMLIB_EXTRACT_FLAG_VERBOSE 0x00000008
-/** Read the WIM file sequentially while extracting the image. */
+/** Read the WIM file sequentially while extracting the image. As of wimlib
+ * v1.6.0 this is the default behavior, and this flag no longer does anything.
+ */
#define WIMLIB_EXTRACT_FLAG_SEQUENTIAL 0x00000010
/** Extract special UNIX data captured with ::WIMLIB_ADD_FLAG_UNIX_DATA. Only
* behavior is currently less than satisfactory. Do not use (yet). */
#define WIMLIB_EXTRACT_FLAG_RESUME 0x00010000
-/**
- * @name Mount flags
- *
- * The following flags can be passed to wimlib_mount_image().
- *
- * @{
+/** Perform the extraction ordered by the tree of files to extract rather than
+ * how the underlying streams are arranged in the WIM file. For regular WIM
+ * files this may decrease or increase performance, depending on various
+ * factors. For WIM files containing packed streams this will decrease
+ * performance. */
+#define WIMLIB_EXTRACT_FLAG_FILE_ORDER 0x00020000
+
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Treat the
+ * paths in the WIM as "glob" patterns which may contain the wildcard characters
+ * '?' and '*'. The '?' character matches any character except a path
+ * separator, whereas the '*' character matches zero or more non-path-separator
+ * characters. Each glob pattern may match zero or more paths in the WIM file.
+ * If a glob pattern ends in a path separator, it will only match directories
+ * (including reparse points with FILE_ATTRIBUTE_DIRECTORY set). By default, if
+ * a glob pattern does not match any files, a warning but not an error will be
+ * issued, even if the glob pattern did not actually contain wildcard
+ * characters. Use ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB to get an error instead.
*/
+#define WIMLIB_EXTRACT_FLAG_GLOB_PATHS 0x00040000
+
+/** In combination with ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS, causes an error
+ * (::WIMLIB_ERR_PATH_DOES_NOT_EXIST) rather than a warning to be issued when
+ * one of the provided globs did not match a file. */
+#define WIMLIB_EXTRACT_FLAG_STRICT_GLOB 0x00080000
+
+/** @} */
+/** @ingroup G_mounting_wim_images
+ * @{ */
/** Mount the WIM image read-write rather than the default of read-only. */
#define WIMLIB_MOUNT_FLAG_READWRITE 0x00000001
* allow_other option to FUSE mount) */
#define WIMLIB_MOUNT_FLAG_ALLOW_OTHER 0x00000040
-/**
- * @name Open flags
- *
- * The following flags can be passed to wimlib_open_wim() and several other
- * functions such as wimlib_join().
- * @{
- */
+/** @} */
+/** @ingroup G_creating_and_opening_wims
+ * @{ */
/** Verify the WIM contents against the WIM's integrity table, if present. This
* causes the raw data of the WIM file, divided into 10 MB chunks, to be
* integrity table is invalid). */
#define WIMLIB_OPEN_FLAG_CHECK_INTEGRITY 0x00000001
-/** Issue an error if the WIM is part of a split WIM. */
+/** Issue an error if the WIM is part of a split WIM. Software can provide
+ * this flag for convenience if it explicitly does not want to support split
+ * WIMs. */
#define WIMLIB_OPEN_FLAG_ERROR_IF_SPLIT 0x00000002
/** Check if the WIM is writable and return ::WIMLIB_ERR_WIM_IS_READONLY if it
* an error sooner rather than later. */
#define WIMLIB_OPEN_FLAG_WRITE_ACCESS 0x00000004
-/**
- * @name Unmount flags
- *
- * The following flags can be passed to wimlib_unmount_image().
- * @{
- */
+/** @} */
+/** @ingroup G_mounting_wim_images
+ * @{ */
/** See ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
#define WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY 0x00000001
/** Do a "lazy" unmount (detach filesystem immediately, even if busy). */
#define WIMLIB_UNMOUNT_FLAG_LAZY 0x00000010
-/**
- * @name Update flags
- *
- * The following flags can be passed to wimlib_update_image().
- * @{
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Send ::WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND and
* ::WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND messages. */
#define WIMLIB_UPDATE_FLAG_SEND_PROGRESS 0x00000001
-/**
- * @name Write flags
- *
- * The following flags can be passed to wimlib_write(), wimlib_overwrite(),
- * wimlib_write_to_fd(), and several other functions such as wimlib_join().
- * @{
- */
+/** @} */
+/** @ingroup G_writing_and_overwriting_wims
+ * @{ */
/** Include an integrity table in the WIM.
*
* already implied for wimlib_overwrite(). */
#define WIMLIB_WRITE_FLAG_STREAMS_OK 0x00000400
+#define WIMLIB_WRITE_FLAG_RESERVED 0x00000800
+
/**
- * @name Init flags
- *
- * The following flags can be passed to wimlib_global_init().
- * @{
- */
+ * When writing streams in the resulting WIM file, pack multiple streams into a
+ * single WIM resource instead of compressing them independently. This tends to
+ * produce a better compression ratio at the cost of less random access.
+ * However, WIMs created with this flag are only compatible with wimlib v1.6.0
+ * or later and WIMGAPI Windows 8 or later, seemingly for Windows Setup only and
+ * <b>not including ImageX and Dism</b>. WIMs created with this flag must use
+ * version number 3584 in their header instead of 68864.
+ *
+ * If this flag is passed to wimlib_overwrite() and the WIM did not previously
+ * contain packed streams, the WIM's version number will be changed to 3584 and
+ * the new streams will be written packed. Use ::WIMLIB_WRITE_FLAG_REBUILD to
+ * force the WIM to be fully rebuilt. */
+#define WIMLIB_WRITE_FLAG_PACK_STREAMS 0x00001000
+
+/** @} */
+/** @ingroup G_general
+ * @{ */
/** Assume that strings are represented in UTF-8, even if this is not the
* locale's character encoding. This flag is ignored on Windows, where wimlib
*/
#define WIMLIB_INIT_FLAG_STRICT_APPLY_PRIVILEGES 0x00000008
-/**
- * @name Resource reference flags
- *
- * The following flags can be passed to wimlib_reference_resource_files() and
- * wimlib_reference_resources().
- * @{
- */
+/** Default to interpreting WIM paths case sensitively (default on UNIX-like
+ * systems). */
+#define WIMLIB_INIT_FLAG_DEFAULT_CASE_SENSITIVE 0x00000010
+
+/** Default to interpreting WIM paths case insensitively (default on Windows).
+ * This does not apply to mounted images. */
+#define WIMLIB_INIT_FLAG_DEFAULT_CASE_INSENSITIVE 0x00000020
+
+/** @} */
+/** @ingroup G_nonstandalone_wims
+ * @{ */
/** wimlib_reference_resource_files() only: Enable shell-style filename
* globbing. */
* ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. */
#define WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH 0x00000002
-/**
- * @}
- */
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** The specific type of update to perform. */
enum wimlib_update_op {
};
};
-/** Specification of a file or directory tree to extract from a WIM image. */
+/** @} */
+/** @ingroup G_extracting_wims
+ * @{ */
+
+/** Specification of a file or directory tree to extract from a WIM image. Used
+ * in calls to wimlib_extract_files(). */
struct wimlib_extract_command {
/** Path to file or directory tree within the WIM image to extract. It
* must be provided as an absolute path from the root of the WIM image.
int extract_flags;
};
+
+/** @} */
+/** @ingroup G_general
+ * @{ */
+
/**
* Possible values of the error code returned by many functions in wimlib.
*
WIMLIB_ERR_WIM_IS_READONLY,
WIMLIB_ERR_WRITE,
WIMLIB_ERR_XML,
+ WIMLIB_ERR_WIM_IS_ENCRYPTED,
};
#define WIMLIB_ALL_IMAGES (-1)
/**
+ * @ingroup G_modifying_wims
+ *
* Appends an empty image to a WIM file. This empty image will initially
* contain no files or directories, although if written without further
* modifications, a root directory will be created automatically for it. After
int *new_idx_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Adds an image to a WIM file from an on-disk directory tree or NTFS volume.
*
* The directory tree or NTFS volume is scanned immediately to load the dentry
int add_flags,
wimlib_progress_func_t progress_func);
-/** This function is equivalent to wimlib_add_image() except it allows for
+/**
+ * @ingroup G_modifying_wims
+ *
+ * This function is equivalent to wimlib_add_image() except it allows for
* multiple sources to be combined into a single WIM image. This is done by
* specifying the @p sources and @p num_sources parameters instead of the @p
* source parameter of wimlib_add_image(). The rest of the parameters are the
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Creates a ::WIMStruct for a new WIM file.
*
* This only creates an in-memory structure for a WIM that initially contains no
wimlib_create_new_wim(int ctype, WIMStruct **wim_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Deletes an image, or all images, from a WIM file.
*
* All streams referenced by the image(s) being deleted are removed from the
wimlib_delete_image(WIMStruct *wim, int image);
/**
+ * @ingroup G_modifying_wims
+ *
* Exports an image, or all the images, from a WIM file, into another WIM file.
*
* The destination image is made to share the same dentry tree and security data
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_extracting_wims
+ *
* Extract zero or more files or directory trees from a WIM image.
*
* This generalizes the single-image extraction functionality of
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_extracting_wims
+ *
* Extracts an image, or all images, from a WIM to a directory or directly to a
* NTFS volume image.
*
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_extracting_wims
+ *
* Since wimlib v1.5.0: Extract one or more images from a pipe on which a
* pipable WIM is being sent.
*
wimlib_progress_func_t progress_func);
/**
+ * Similar to wimlib_extract_paths(), but the paths to extract from the WIM
+ * image are specified in the UTF-8 text file named by @p path_list_file which
+ * itself contains the list of paths to use, one per line. Leading and trailing
+ * whitespace, and otherwise empty lines and lines beginning with the ';'
+ * character are ignored. No quotes are needed as paths are otherwise delimited
+ * by the newline character.
+ */
+extern int
+wimlib_extract_pathlist(WIMStruct *wim, int image,
+ const wimlib_tchar *target,
+ const wimlib_tchar *path_list_file,
+ int extract_flags,
+ wimlib_progress_func_t progress_func);
+
+/**
+ * Similar to wimlib_extract_files(), but the files or directories to extract
+ * from the WIM image are specified as an array of paths.
+ *
+ * Each path will be extracted to a corresponding subdirectory of the @p target
+ * based on its location in the WIM image. For example, if one of the paths to
+ * extract is "/Windows/explorer.exe" and the target is "outdir", the file will
+ * be extracted to "outdir/Windows/explorer.exe". Each path to extract must be
+ * specified as the absolute path to a directory within the WIM image.
+ * Separators in the paths to extract may be either forwards or backwards
+ * slashes, and leading path separators are optional. Symbolic links are not
+ * dereferenced when interpreting paths to extract. Paths to extract will be
+ * interpreted either case-sensitively (UNIX default) or case-insensitively
+ * (Windows default); this can be changed by wimlib_global_init().
+ *
+ * The @p target path, on the other hand, is expected to be a native path. On
+ * UNIX-like systems it may not contain backslashes, for example.
+ *
+ * By default, if any paths to extract do not exist,
+ * ::WIMLIB_ERR_PATH_DOES_NOT_EXIST is issued. This behavior changes if
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS is specified.
+ *
+ * With ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS specified in @p extract_flags, this
+ * function additionally allows paths to be globs using the wildcard characters
+ * '*' and '?'.
+ */
+extern int
+wimlib_extract_paths(WIMStruct *wim,
+ int image,
+ const wimlib_tchar *target,
+ const wimlib_tchar * const *paths,
+ size_t num_paths,
+ int extract_flags,
+ wimlib_progress_func_t progress_func);
+
+/**
+ * @ingroup G_wim_information
+ *
* Extracts the XML data of a WIM file to a file stream. Every WIM file
* includes a string of XML that describes the images contained in the WIM.
*
+ * See wimlib_get_xml_data() to read the XML data into memory instead.
+ *
* @param wim
* Pointer to the ::WIMStruct for a WIM file, which does not necessarily
* have to be standalone (e.g. it could be part of a split WIM).
wimlib_extract_xml_data(WIMStruct *wim, FILE *fp);
/**
+ * @ingroup G_general
+ *
* Frees all memory allocated for a WIMStruct and closes all files associated
* with it.
*
wimlib_free(WIMStruct *wim);
/**
+ * @ingroup G_general
+ *
* Converts a ::wimlib_compression_type value into a string.
*
* @param ctype
wimlib_get_compression_type_string(int ctype);
/**
+ * @ingroup G_general
+ *
* Converts an error code into a string describing it.
*
* @param code
wimlib_get_error_string(enum wimlib_error_code code);
/**
+ * @ingroup G_wim_information
+ *
* Returns the description of the specified image.
*
* @param wim
wimlib_get_image_description(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Returns the name of the specified image.
*
* @param wim
/**
+ * @ingroup G_wim_information
+ *
* Get basic information about a WIM file.
*
* @param wim
wimlib_get_wim_info(WIMStruct *wim, struct wimlib_wim_info *info);
/**
+ * @ingroup G_wim_information
+ *
+ * Read the XML data of a WIM file into an in-memory buffer. Every WIM file
+ * includes a string of XML that describes the images contained in the WIM.
+ *
+ * See wimlib_extract_xml_data() to extract the XML data to a file stream
+ * instead.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct for a WIM file, which does not necessarily
+ * have to be standalone (e.g. it could be part of a split WIM).
+ * @param buf_ret
+ * On success, a pointer to an allocated buffer containing the raw UTF16-LE
+ * XML data is written to this location.
+ * @param bufsize_ret
+ * The size of the XML data in bytes is written to this location.
+ *
+ * @return 0 on success; nonzero on error.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p wim is not a ::WIMStruct that was created by wimlib_open_wim(), or
+ * @p buf_ret or @p bufsize_ret was @c NULL.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * @retval ::WIMLIB_ERR_READ
+ * @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
+ * Failed to read the XML data from the WIM.
+ */
+extern int
+wimlib_get_xml_data(WIMStruct *wim, void **buf_ret, size_t *bufsize_ret);
+
+/**
+ * @ingroup G_general
+ *
* Initialization function for wimlib. Call before using any other wimlib
* function except wimlib_set_print_errors(). If not done manually, this
* function will be called automatically with @p init_flags set to
- * ::WIMLIB_INIT_FLAG_ASSUME_UTF8.
+ * ::WIMLIB_INIT_FLAG_ASSUME_UTF8. This function does nothing if called again
+ * after it has already successfully run.
*
* @param init_flags
* Bitwise OR of flags prefixed with WIMLIB_INIT_FLAG.
wimlib_global_init(int init_flags);
/**
+ * @ingroup G_general
+ *
* Cleanup function for wimlib. You are not required to call this function, but
* it will release any global resources allocated by the library.
*/
wimlib_global_cleanup(void);
/**
+ * @ingroup G_wim_information
+ *
* Determines if an image name is already used by some image in the WIM.
*
* @param wim
wimlib_image_name_in_use(const WIMStruct *wim, const wimlib_tchar *name);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through a file or directory tree in the WIM image. By specifying
* appropriate flags and a callback function, you can get the attributes of a
* file in the WIM, get a directory listing, or even get a listing of the entire
wimlib_iterate_dir_tree_callback_t cb, void *user_ctx);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through the lookup table of a WIM file. This can be used to directly
* get a listing of the unique resources contained in a WIM file over all
* images. Both file resources and metadata resources are included. However,
void *user_ctx);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Joins a split WIM into a stand-alone one-part WIM.
*
* @param swms
int wim_write_flags,
wimlib_progress_func_t progress_func);
-/**
- * Compress a chunk of a WIM resource using LZX compression.
- *
- * This function is exported for convenience only and should only be used by
- * library clients looking to make use of wimlib's compression code for another
- * purpose.
- *
- * @param chunk
- * Uncompressed data of the chunk.
- * @param chunk_size
- * Size of the uncompressed chunk, in bytes.
- * @param out
- * Pointer to output buffer of size at least (@p chunk_size - 1) bytes.
- *
- * @return
- * The size of the compressed data written to @p out in bytes, or 0 if the
- * data could not be compressed to (@p chunk_size - 1) bytes or fewer.
- *
- * As a special requirement, the compression code is optimized for the WIM
- * format and therefore requires (@p chunk_size <= 32768).
- */
-extern unsigned
-wimlib_lzx_compress(const void *chunk, unsigned chunk_size, void *out);
/**
- * Decompresses a block of LZX-compressed data as used in the WIM file format.
- *
- * Note that this will NOT work unmodified for LZX as used in the cabinet
- * format, which is not the same as in the WIM format!
- *
- * This function is exported for convenience only and should only be used by
- * library clients looking to make use of wimlib's compression code for another
- * purpose.
- *
- * @param compressed_data
- * Pointer to the compressed data.
+ * @ingroup G_mounting_wim_images
*
- * @param compressed_len
- * Length of the compressed data, in bytes.
- *
- * @param uncompressed_data
- * Pointer to the buffer into which to write the uncompressed data.
- *
- * @param uncompressed_len
- * Length of the uncompressed data. It must be 32768 bytes or less.
- *
- * @return
- * 0 on success; non-zero on failure.
- */
-extern int
-wimlib_lzx_decompress(const void *compressed_data, unsigned compressed_len,
- void *uncompressed_data, unsigned uncompressed_len);
-
-
-/**
* Mounts an image in a WIM file on a directory read-only or read-write.
*
* As this is implemented using FUSE (Filesystme in UserSpacE), this is not
const wimlib_tchar *staging_dir);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Opens a WIM file and creates a ::WIMStruct for it.
*
* @param wim_file
* chunk of the WIM does not match the corresponding message digest given
* in the integrity table.
* @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
- * Resources in @p wim_file are compressed, but the chunk size is not 32768.
+ * Resources in @p wim_file are compressed, but the chunk size was invalid
+ * for the WIM's compression format.
* @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
* The header of @p wim_file says that resources in the WIM are compressed,
* but the header flag indicating LZX or XPRESS compression is not set.
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Overwrites the file that the WIM was originally read from, with changes made.
* This only makes sense for ::WIMStruct's obtained from wimlib_open_wim()
* rather than wimlib_create_new_wim().
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Prints information about one image, or all images, contained in a WIM.
*
* @param wim
wimlib_print_available_images(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Deprecated in favor of wimlib_get_wim_info(), which provides the information
* in a way that can be accessed programatically.
*/
wimlib_print_header(const WIMStruct *wim) _wimlib_deprecated;
/**
+ * @ingroup G_wim_information
+ *
* Deprecated in favor of wimlib_iterate_dir_tree(), which provides the
* information in a way that can be accessed programatically.
*/
wimlib_print_metadata(WIMStruct *wim, int image) _wimlib_deprecated;
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Reference resources from other WIM files or split WIM parts. This function
* can be used on WIMs that are not standalone, such as split or "delta" WIMs,
* to load needed resources (that is, "streams" keyed by SHA1 message digest)
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Similar to wimlib_reference_resource_files(), but operates at a lower level
* where the caller must open the ::WIMStruct for each referenced file itself.
*
unsigned num_resource_wims, int ref_flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Declares that a newly added image is mostly the same as a prior image, but
* captured at a later point in time, possibly with some modifications in the
* intervening time. This is designed to be used in incremental backups of the
int flags, wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Translates a string specifying the name or number of an image in the WIM into
* the number of the image. The images are numbered starting at 1.
*
const wimlib_tchar *image_name_or_num);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the description of an image in the WIM.
*
* @param wim
const wimlib_tchar *description);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Set the compression chunk size of a WIM to use in subsequent calls to
+ * wimlib_write() or wimlib_overwrite().
+ *
+ * A compression chunk size will result in a greater compression ratio, but the
+ * speed of random access to the WIM will be reduced, and the effect of an
+ * increased compression chunk size is limited by the size of each file being
+ * compressed.
+ *
+ * <b>WARNING: Microsoft's software is seemingly incompatible with LZX chunk
+ * sizes other than 32768. Chunk sizes other than 32768 (for any format) are
+ * also incompatible with wimlib v1.5.3 and earlier.</b>
+ *
+ * @param wim
+ * ::WIMStruct for a WIM.
+ * @param out_chunk_size
+ * The chunk size (in bytes) to set. The valid chunk sizes are dependent
+ * on the compression format. The XPRESS and LZMS compression formats
+ * support chunk sizes that are powers of 2 with exponents between 15 and
+ * 26 inclusively, whereas the LZX compression format supports chunk sizes
+ * that are powers of 2 with exponents between 15 and 21 inclusively. As a
+ * special case, if @p out_chunk_size is specified as 0, the chunk size is
+ * set to the default for the currently selected output compression type.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
+ * @p chunk_size is not a supported chunk size for the currently selected
+ * output compression type.
+ */
+extern int
+wimlib_set_output_chunk_size(WIMStruct *wim, uint32_t chunk_size);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Similar to wimlib_set_output_chunk_size(), but set the chunk size for writing
+ * packed streams.
+ */
+extern int
+wimlib_set_output_pack_chunk_size(WIMStruct *wim, uint32_t chunk_size);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Set the compression type of a WIM to use in subsequent calls to
+ * wimlib_write() or wimlib_overwrite().
+ *
+ * @param wim
+ * ::WIMStruct for a WIM.
+ * @param ctype
+ * The compression type to set (one of ::wimlib_compression_type). If this
+ * compression type is incompatible with the current output chunk size
+ * (either the default or as set with wimlib_set_output_chunk_size()), the
+ * output chunk size is reset to the default for that compression type.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype did not specify a valid compression type.
+ */
+extern int
+wimlib_set_output_compression_type(WIMStruct *wim, int ctype);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Similar to wimlib_set_output_compression_type(), but set the compression type
+ * for writing packed streams.
+ */
+extern int
+wimlib_set_output_pack_compression_type(WIMStruct *wim, int ctype);
+
+/**
+ * @ingroup G_modifying_wims
+ *
* Set basic information about a WIM.
*
* @param wim
int which);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes what is written in the \<FLAGS\> element in the WIM XML data
* (something like "Core" or "Ultimate")
*
wimlib_set_image_flags(WIMStruct *wim, int image, const wimlib_tchar *flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the name of an image in the WIM.
*
* @param wim
wimlib_set_image_name(WIMStruct *wim, int image, const wimlib_tchar *name);
/**
+ * @ingroup G_general
+ *
* Set the functions that wimlib uses to allocate and free memory.
*
* These settings are global and not per-WIM.
* A function equivalent to @c realloc() that wimlib will use to reallocate
* memory. If @c NULL, the free function is set back to the default @c
* realloc() from the C library.
- * @return 0 on success; nonzero on error.
- * @retval ::WIMLIB_ERR_UNSUPPORTED
- * wimlib was compiled with the @c --without-custom-memory-allocator flag,
- * so custom memory allocators are unsupported.
+ * @return 0
*/
extern int
wimlib_set_memory_allocator(void *(*malloc_func)(size_t),
void *(*realloc_func)(void *, size_t));
/**
+ * @ingroup G_general
+ *
* Sets whether wimlib is to print error messages to @c stderr when a function
* fails. These error messages may provide information that cannot be
* determined only from the error code that is returned. Not every error will
wimlib_set_print_errors(bool show_messages);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Splits a WIM into multiple parts.
*
* @param wim
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_mounting_wim_images
+ *
* Unmounts a WIM image that was mounted using wimlib_mount_image().
*
* The image to unmount is specified by the path to the mountpoint, not the
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_modifying_wims
+ *
* Update a WIM image by adding, deleting, and/or renaming files or directories.
*
* @param wim
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Writes a WIM to a file.
*
* This brings in resources from any external locations, such as directory trees
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Since wimlib v1.5.0: Same as wimlib_write(), but write the WIM directly to a
* file descriptor, which need not be seekable if the write is done in a special
* pipable WIM format by providing ::WIMLIB_WRITE_FLAG_PIPABLE in @p
wimlib_progress_func_t progress_func);
/**
- * This function is equivalent to wimlib_lzx_compress(), but instead compresses
- * the data using "XPRESS" compression.
+ * @defgroup G_compression Compression and decompression functions
+ *
+ * @brief Functions for LZX, XPRESS, and LZMS compression and decompression,
+ * exported for convenience only, as they are already used by wimlib internally
+ * when appropriate.
+ *
+ * These functions can be used for general-purpose lossless data compression,
+ * but some limitations apply; for example, none of the compressors or
+ * decompressors currently support sliding windows, and there also exist
+ * slightly different variants of these formats that are not supported
+ * unmodified.
*/
-extern unsigned
-wimlib_xpress_compress(const void *chunk, unsigned chunk_size, void *out);
/**
- * This function is equivalent to wimlib_lzx_decompress(), but instead assumes
- * the data is compressed using "XPRESS" compression.
+ * @ingroup G_compression
+ * @{
+ */
+
+/** Header for compression parameters to pass to wimlib_create_compressor() or
+ * wimlib_set_default_compressor_params(). */
+struct wimlib_compressor_params_header {
+ /** Size of the parameters, in bytes. */
+ uint32_t size;
+};
+
+/** Header for decompression parameters to pass to wimlib_create_decompressor()
+ * or wimlib_set_default_decompressor_params() */
+struct wimlib_decompressor_params_header {
+ /** Size of the parameters, in bytes. */
+ uint32_t size;
+};
+
+/** LZX compression parameters that can optionally be passed to
+ * wimlib_create_compressor() with the compression type
+ * ::WIMLIB_COMPRESSION_TYPE_LZX. */
+struct wimlib_lzx_compressor_params {
+ /** hdr.size Must be set to the size of this structure, in bytes. */
+ struct wimlib_compressor_params_header hdr;
+
+ /** Relatively fast LZX compression algorithm with a decent compression
+ * ratio; the suggested default. */
+#define WIMLIB_LZX_ALGORITHM_FAST 0
+
+ /** Slower LZX compression algorithm that provides a better compression
+ * ratio. */
+#define WIMLIB_LZX_ALGORITHM_SLOW 1
+
+ /** Algorithm to use to perform the compression: either
+ * ::WIMLIB_LZX_ALGORITHM_FAST or ::WIMLIB_LZX_ALGORITHM_SLOW. The
+ * format is still LZX; this refers to the method the code will use to
+ * perform LZX-compatible compression. */
+ uint32_t algorithm : 3;
+
+ /** If set to 1, the default parameters for the specified algorithm are
+ * used rather than the ones specified in the following union. */
+ uint32_t use_defaults : 1;
+
+ union {
+ /** Parameters for the fast algorithm. */
+ struct wimlib_lzx_fast_params {
+ uint32_t fast_reserved1[10];
+ } fast;
+
+ /** Parameters for the slow algorithm. */
+ struct wimlib_lzx_slow_params {
+ /** If set to 1, the compressor can output length 2
+ * matches. If set 0, the compressor only outputs
+ * matches of length 3 or greater. Suggested value: 1
+ */
+ uint32_t use_len2_matches : 1;
+
+ uint32_t slow_reserved1 : 31;
+
+ /** Matches with length (in bytes) greater than or equal
+ * to this value are immediately taken without spending
+ * time on minimum-cost measurements. Suggested value:
+ * 32. */
+ uint32_t nice_match_length;
+
+ /** Number of passes to compute a match/literal sequence
+ * for each LZX block. This is for an iterative
+ * algorithm that attempts to minimize the cost of the
+ * match/literal sequence by using a cost model provided
+ * by the previous iteration. Must be at least 1.
+ * Suggested value: 2. */
+ uint32_t num_optim_passes;
+
+ /** Reserved; set to 0. */
+ uint32_t slow_reserved_blocksplit;
+
+ /** Maximum depth to search for matches at each
+ * position. Suggested value: 50. */
+ uint32_t max_search_depth;
+
+ /** Maximum number of potentially good matches to
+ * consider for each position. Suggested value: 3. */
+ uint32_t max_matches_per_pos;
+
+ uint32_t slow_reserved2[2];
+
+ /** Assumed cost of a main symbol with zero frequency.
+ * Must be at least 1 and no more than 16. Suggested
+ * value: 15. */
+ uint8_t main_nostat_cost;
+
+ /** Assumed cost of a length symbol with zero frequency.
+ * Must be at least 1 and no more than 16. Suggested
+ * value: 15. */
+ uint8_t len_nostat_cost;
+
+ /** Assumed cost of an aligned symbol with zero
+ * frequency. Must be at least 1 and no more than 8.
+ * Suggested value: 7. */
+ uint8_t aligned_nostat_cost;
+
+ uint8_t slow_reserved3[5];
+ } slow;
+ } alg_params;
+};
+
+/** Opaque compressor handle. */
+struct wimlib_compressor;
+
+/** Opaque decompressor handle. */
+struct wimlib_decompressor;
+
+/**
+ * Set the default compression parameters for the specified compression type.
+ * This will affect both explicit and wimlib-internal calls to
+ * wimlib_create_compressor().
+ *
+ * @param ctype
+ * Compression type for which to set the default compression parameters.
+ * @param params
+ * Compression-type specific parameters. This may be @c NULL, in which
+ * case the "default default" parameters are restored.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Not enough memory to duplicate the parameters (perhaps @c params->size
+ * was invalid).
+ */
+extern int
+wimlib_set_default_compressor_params(enum wimlib_compression_type ctype,
+ const struct wimlib_compressor_params_header *params);
+
+/**
+ * Allocate a compressor for the specified compression type using the specified
+ * parameters.
+ *
+ * @param ctype
+ * Compression type for which to create the compressor.
+ * @param max_block_size
+ * Maximum block size to support. The exact meaning and allowed values for
+ * this parameter depend on the compression type, but it at least specifies
+ * the maximum allowed value for @p uncompressed_size to wimlib_compress().
+ * @param extra_params
+ * An optional pointer to extra compressor parameters for the specified
+ * compression type. For LZX, a pointer to ::wimlib_lzx_compressor_params
+ * may be specified here. If left @c NULL, the default parameters are
+ * used.
+ * @param compressor_ret
+ * A location into which to return the pointer to the allocated compressor,
+ * which can be used for any number of calls to wimlib_compress() before
+ * being freed with wimlib_free_compressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * The compression parameters were invalid.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Insufficient memory to allocate the compressor.
+ */
+extern int
+wimlib_create_compressor(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ const struct wimlib_compressor_params_header *extra_params,
+ struct wimlib_compressor **compressor_ret);
+
+/**
+ * Losslessly compress a block of data using a compressor previously created
+ * with wimlib_create_compressor().
+ *
+ * @param uncompressed_data
+ * Buffer containing the data to compress.
+ * @param uncompressed_size
+ * Size, in bytes, of the data to compress.
+ * @param compressed_data
+ * Buffer into which to write the compressed data.
+ * @param compressed_size_avail
+ * Number of bytes available in @p compressed_data.
+ * @param compressor
+ * A compressor previously allocated with wimlib_create_compressor().
+ *
+ * @return
+ * The size of the compressed data, in bytes, or 0 if the input data could
+ * not be compressed to @p compressed_size_avail or fewer bytes.
+ */
+extern size_t
+wimlib_compress(const void *uncompressed_data, size_t uncompressed_size,
+ void *compressed_data, size_t compressed_size_avail,
+ struct wimlib_compressor *compressor);
+
+/**
+ * Free a compressor previously allocated with wimlib_create_compressor().
+ *
+ * @param compressor
+ * The compressor to free.
+ */
+extern void
+wimlib_free_compressor(struct wimlib_compressor *compressor);
+
+/**
+ * Set the default decompression parameters for the specified compression type.
+ * This will affect both explicit and wimlib-internal calls to
+ * wimlib_create_decompressor().
+ *
+ * @param ctype
+ * Compression type for which to set the default decompression parameters.
+ * @param params
+ * Compression-type specific parameters. This may be @c NULL, in which
+ * case the "default default" parameters are restored.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Not enough memory to duplicate the parameters (perhaps @c params->size
+ * was invalid).
*/
extern int
-wimlib_xpress_decompress(const void *compressed_data, unsigned compressed_len,
- void *uncompressed_data, unsigned uncompressed_len);
+wimlib_set_default_decompressor_params(enum wimlib_compression_type ctype,
+ const struct wimlib_decompressor_params_header *params);
+
+/**
+ * Allocate a decompressor for the specified compression type using the
+ * specified parameters.
+ *
+ * @param ctype
+ * Compression type for which to create the decompressor.
+ * @param max_block_size
+ * Maximum block size to support. The exact meaning and allowed values for
+ * this parameter depend on the compression type, but it at least specifies
+ * the maximum allowed value for @p uncompressed_size to
+ * wimlib_decompress().
+ * @param extra_params
+ * An optional pointer to extra decompressor parameters for the specified
+ * compression type. If @c NULL, the default parameters are used.
+ * @param decompressor_ret
+ * A location into which to return the pointer to the allocated
+ * decompressor, which can be used for any number of calls to
+ * wimlib_decompress() before being freed with wimlib_free_decompressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * The decompression parameters were invalid.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Insufficient memory to allocate the decompressor.
+ */
+extern int
+wimlib_create_decompressor(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ const struct wimlib_decompressor_params_header *extra_params,
+ struct wimlib_decompressor **decompressor_ret);
+
+/**
+ * Decompress a block of data using a decompressor previously created with
+ * wimlib_create_decompressor().
+ *
+ * @param compressed_data
+ * Buffer containing the data to decompress.
+ * @param compressed_size
+ * Size, in bytes, of the data to decompress.
+ * @param uncompressed_data
+ * Buffer into which to write the uncompressed data.
+ * @param uncompressed_size
+ * Size, in bytes, of the data when uncompressed.
+ * @param decompressor
+ * A decompressor previously allocated with wimlib_create_decompressor().
+ *
+ * @return 0 on success; nonzero on error.
+ */
+extern int
+wimlib_decompress(const void *compressed_data, size_t compressed_size,
+ void *uncompressed_data, size_t uncompressed_size,
+ struct wimlib_decompressor *decompressor);
+
+/**
+ * Free a decompressor previously allocated with wimlib_create_decompressor().
+ *
+ * @param decompressor
+ * The decompressor to free.
+ */
+extern void
+wimlib_free_decompressor(struct wimlib_decompressor *decompressor);
+
+
+struct wimlib_lzx_params_old;
+struct wimlib_lzx_context_old;
+
+/** Deprecated; do not use. */
+extern int
+wimlib_lzx_set_default_params(const struct wimlib_lzx_params_old *params)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern int
+wimlib_lzx_alloc_context(const struct wimlib_lzx_params_old *params,
+ struct wimlib_lzx_context_old **ctx_pp)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern void
+wimlib_lzx_free_context(struct wimlib_lzx_context_old *ctx)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern unsigned
+wimlib_lzx_compress2(const void *udata, unsigned ulen, void *cdata,
+ struct wimlib_lzx_context_old *ctx)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern unsigned
+wimlib_lzx_compress(const void *udata, unsigned ulen, void *cdata)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern unsigned
+wimlib_xpress_compress(const void *udata, unsigned ulen, void *cdata)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern int
+wimlib_lzx_decompress(const void *cdata, unsigned clen,
+ void *udata, unsigned ulen)
+ _wimlib_deprecated;
+
+/** Deprecated; do not use. */
+extern int
+wimlib_xpress_decompress(const void *cdata, unsigned clen,
+ void *udata, unsigned ulen)
+ _wimlib_deprecated;
+
+/** @} */
+
+
#ifdef __cplusplus
}
git://wimlib.net / wimlib / blobdiff