* documented in the man page for @b wimlib-imagex.
*
* - The old WIM format from Vista pre-releases is not supported.
- * - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
+ * - wimlib does not provide a clone of the @b PEImg tool, or the @b DISM
* functionality other than that already present in @b ImageX, that allows you
* to make certain Windows-specific modifications to a Windows PE image, such
* as adding a driver or Windows component. Such a tool could be implemented
* ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY, and
* ::WIMLIB_PROGRESS_MSG_SCAN_END. */
struct wimlib_progress_info_scan {
- /** Top-level directory being scanned; or, when capturing a NTFS
+ /** Top-level directory being scanned; or, when capturing an NTFS
* volume with ::WIMLIB_ADD_FLAG_NTFS, this is instead the path
* to the file or block device that contains the NTFS volume
* being scanned. */
const wimlib_tchar *source;
/** Path to the file (or directory) that has been scanned, valid
- * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing a NTFS
+ * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing an NTFS
* volume with ::WIMLIB_ADD_FLAG_NTFS, this path will be
* relative to the root of the NTFS volume. */
const wimlib_tchar *cur_path;
/** @ingroup G_modifying_wims
* @{ */
-/** Directly capture a NTFS volume rather than a generic directory. This flag
+/** Directly capture an NTFS volume rather than a generic directory. This flag
* cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
* ::WIMLIB_ADD_FLAG_UNIX_DATA. */
#define WIMLIB_ADD_FLAG_NTFS 0x00000001
/** Give the exported image(s) no descriptions. */
#define WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS 0x00000004
+/** This advises the library that the program is finished with the source
+ * WIMStruct and will not attempt to access it after the call to
+ * wimlib_export_image(), with the exception of the call to wimlib_free(). */
+#define WIMLIB_EXPORT_FLAG_GIFT 0x00000008
+
/** @} */
/** @ingroup G_extracting_wims
* @{ */
-/** Extract the image directly to a NTFS volume rather than a generic directory.
+/** Extract the image directly to an NTFS volume rather than a generic directory.
* This mode is only available if wimlib was compiled with libntfs-3g support;
* if not, ::WIMLIB_ERR_UNSUPPORTED will be returned. In this mode, the
- * extraction target will be interpreted as the path to a NTFS volume image (as
+ * extraction target will be interpreted as the path to an NTFS volume image (as
* a regular file or block device) rather than a directory. It will be opened
* using libntfs-3g, and the image will be extracted to the NTFS filesystem's
* root directory. Note: this flag cannot be used when wimlib_extract_image()
/** @ingroup G_writing_and_overwriting_wims
* @{ */
-/** Include an integrity table in the WIM.
+/**
+ * Include an integrity table in the resulting WIM file.
*
- * For WIMs created with wimlib_open_wim(), the default behavior is to include
- * an integrity table if and only if one was present before. For WIMs created
- * with wimlib_create_new_wim(), the default behavior is to not include an
- * integrity table. */
+ * For ::WIMStruct's created with wimlib_open_wim(), the default behavior is to
+ * include an integrity table if and only if one was present before. For
+ * ::WIMStruct's created with wimlib_create_new_wim(), the default behavior is
+ * to not include an integrity table.
+ */
#define WIMLIB_WRITE_FLAG_CHECK_INTEGRITY 0x00000001
-/** Do not include an integrity table in the new WIM file. This is the default
- * behavior, unless the WIM already included an integrity table. */
+/**
+ * Do not include an integrity table in the resulting WIM file. This is the
+ * default behavior, unless the ::WIMStruct was created by opening a WIM with an
+ * integrity table.
+ */
#define WIMLIB_WRITE_FLAG_NO_CHECK_INTEGRITY 0x00000002
-/** Write the WIM as "pipable". After writing a WIM with this flag specified,
+/**
+ * Write the WIM as "pipable". After writing a WIM with this flag specified,
* images from it can be applied directly from a pipe using
* wimlib_extract_image_from_pipe(). See the documentation for the --pipable
* flag of `wimlib-imagex capture' for more information. Beware: WIMs written
* with this flag will not be compatible with Microsoft's software.
*
- * For WIMs created with wimlib_open_wim(), the default behavior is to write the
- * WIM as pipable if and only if it was pipable before. For WIMs created with
- * wimlib_create_new_wim(), the default behavior is to write the WIM as
- * non-pipable. */
+ * For ::WIMStruct's created with wimlib_open_wim(), the default behavior is to
+ * write the WIM as pipable if and only if it was pipable before. For
+ * ::WIMStruct's created with wimlib_create_new_wim(), the default behavior is
+ * to write the WIM as non-pipable.
+ */
#define WIMLIB_WRITE_FLAG_PIPABLE 0x00000004
-/** Do not write the WIM as "pipable". This is the default behavior, unless the
- * WIM was pipable already. */
+/**
+ * Do not write the WIM as "pipable". This is the default behavior, unless the
+ * ::WIMStruct was created by opening a pipable WIM.
+ */
#define WIMLIB_WRITE_FLAG_NOT_PIPABLE 0x00000008
-/** Recompress all resources, even if they could otherwise be copied from a
- * different WIM with the same compression type (in the case of
- * wimlib_export_image() being called previously). This flag is also valid in
- * the @p wim_write_flags of wimlib_join(), in which case all resources included
- * in the joined WIM file will be recompressed. */
+/**
+ * When writing streams to the WIM file, recompress them, even if their data is
+ * already available in the desired compressed form (for example, in a WIM file
+ * from which an image has been exported using wimlib_export_image()).
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS can be used to recompress with a higher
+ * compression ratio for the same compression type and chunk size. wimlib's LZX
+ * compressor currently can be given different parameters in order to achieve
+ * different balances between compression ratio and time. In its default mode
+ * as of v1.5.3, it usually compresses slightly better than the competing
+ * Microsoft implementation.
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS can also be used in combination with
+ * ::WIMLIB_WRITE_FLAG_PACK_STREAMS to prevent any solid blocks from being
+ * re-used. (Otherwise, solid blocks are re-used somewhat more liberally than
+ * normal compressed blocks.)
+ *
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS does <b>not</b> cause recompression of streams
+ * that would not otherwise be written. For example, a call to
+ * wimlib_overwrite() with ::WIMLIB_WRITE_FLAG_RECOMPRESS will not, by itself,
+ * cause already-existing streams in the WIM file to be recompressed. To force
+ * the WIM file to be fully rebuilt and recompressed, combine
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS with ::WIMLIB_WRITE_FLAG_REBUILD.
+ */
#define WIMLIB_WRITE_FLAG_RECOMPRESS 0x00000010
-/** Call fsync() just before the WIM file is closed. */
+/**
+ * Immediately before closing the WIM file, sync its data to disk.
+ *
+ * wimlib_overwrite() will set this flag automatically if it decides to
+ * overwrite the WIM file via a temporary file instead of in-place.
+ */
#define WIMLIB_WRITE_FLAG_FSYNC 0x00000020
-/** wimlib_overwrite() only: Re-build the entire WIM file rather than appending
- * data to it if possible. */
+/**
+ * For wimlib_overwrite(), rebuild the entire WIM file, even if it otherwise
+ * could be updated merely be appending to it.
+ *
+ * When rebuilding the WIM file, stream reference counts will be recomputed, and
+ * any streams with 0 reference count (e.g. from deleted files or images) will
+ * not be included in the resulting WIM file.
+ *
+ * This flag can be combined with ::WIMLIB_WRITE_FLAG_RECOMPRESS to force all
+ * data to be recompressed. Otherwise, compressed data is re-used if possible.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_REBUILD 0x00000040
-/** wimlib_overwrite() only: Specifying this flag overrides the default
- * behavior of wimlib_overwrite() after one or more calls to
- * wimlib_delete_image(), which is to rebuild the entire WIM. With this flag,
- * only minimal changes to correctly remove the image from the WIM will be
- * taken. In particular, all streams will be left alone, even if they are no
- * longer referenced. This is probably not what you want, because almost no
- * space will be saved by deleting an image in this way. */
+/**
+ * For wimlib_overwrite(), override the default behavior after one or more calls
+ * to wimlib_delete_image(), which is to rebuild the entire WIM file. With this
+ * flag, only minimal changes to correctly remove the image from the WIM file
+ * will be taken. In particular, all streams will be retained, even if they are
+ * no longer referenced. This may not be what you want, because no space will
+ * be saved by deleting an image in this way.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_SOFT_DELETE 0x00000080
-/** wimlib_overwrite() only: Allow overwriting the WIM even if the readonly
- * flag is set in the WIM header. This can be used in combination with
- * wimlib_set_wim_info() with the ::WIMLIB_CHANGE_READONLY_FLAG flag to actually
- * set the readonly flag on the on-disk WIM file. */
+/**
+ * For wimlib_overwrite(), allow overwriting the WIM file even if the readonly
+ * flag (WIM_HDR_FLAG_READONLY) is set in the WIM header. This can be used
+ * following a call to wimlib_set_wim_info() with the
+ * ::WIMLIB_CHANGE_READONLY_FLAG flag to actually set the readonly flag on the
+ * on-disk WIM file.
+ *
+ * wimlib_write() ignores this flag.
+ */
#define WIMLIB_WRITE_FLAG_IGNORE_READONLY_FLAG 0x00000100
-/** Do not include non-metadata resources already present in other WIMs. This
- * flag can be used to write a "delta" WIM after resources from the WIM on which
- * the delta is to be based were referenced with
- * wimlib_reference_resource_files() or wimlib_reference_resources(). */
+/**
+ * Do not include streams already present in other WIMs. This flag can be used
+ * to write a "delta" WIM after resources from the WIM on which the delta is to
+ * be based were referenced with wimlib_reference_resource_files() or
+ * wimlib_reference_resources().
+ */
#define WIMLIB_WRITE_FLAG_SKIP_EXTERNAL_WIMS 0x00000200
-/** Asserts that for writes of all WIM images, all streams needed for the WIM
- * are already present (not in external resource WIMs) and their reference
- * counts are correct, so the code does not need to recalculate which streams
- * are referenced. This is for optimization purposes only, since with this flag
- * specified, the metadata resources may not need to be decompressed and parsed.
- *
- * This flag can be passed to wimlib_write() and wimlib_write_to_fd(), but is
- * already implied for wimlib_overwrite(). */
+/**
+ * Advises the library that for writes of all WIM images, all streams needed for
+ * the WIM are already present (not in external resource WIMs) and their
+ * reference counts are correct, so the code does not need to recalculate which
+ * streams are referenced. This is for optimization purposes only, since with
+ * this flag specified, the metadata resources may not need to be decompressed
+ * and parsed.
+ *
+ * wimlib_overwrite() will set this flag automatically.
+ */
#define WIMLIB_WRITE_FLAG_STREAMS_OK 0x00000400
-#define WIMLIB_WRITE_FLAG_RESERVED 0x00000800
+/**
+ * For wimlib_write(), retain the WIM's GUID instead of generating a new one.
+ *
+ * wimlib_overwrite() sets this by default, since the WIM remains, logically,
+ * the same file.
+ */
+#define WIMLIB_WRITE_FLAG_RETAIN_GUID 0x00000800
/**
* When writing streams in the resulting WIM file, pack multiple streams into a
- * single WIM resource instead of compressing them independently. This tends to
- * produce a better compression ratio at the cost of less random access.
- * However, WIMs created with this flag are only compatible with wimlib v1.6.0
- * or later and WIMGAPI Windows 8 or later, seemingly for Windows Setup only and
- * <b>not including ImageX and Dism</b>. WIMs created with this flag must use
- * version number 3584 in their header instead of 68864.
- *
- * If this flag is passed to wimlib_overwrite() and the WIM did not previously
- * contain packed streams, the WIM's version number will be changed to 3584 and
- * the new streams will be written packed. Use ::WIMLIB_WRITE_FLAG_REBUILD to
- * force the WIM to be fully rebuilt. */
+ * single compressed resource instead of compressing them independently. This
+ * is also known as creating a "solid archive". This tends to produce a better
+ * compression ratio at the cost of much slower random access.
+ *
+ * WIM files created with this flag are only compatible with wimlib v1.6.0 or
+ * later, WIMGAPI Windows 8 or later, and DISM Windows 8.1 or later. WIM files
+ * created with this flag use a different version number in their header (3584
+ * instead of 68864) and are also called "ESD files".
+ *
+ * If this flag is passed to wimlib_overwrite(), any new data streams will be
+ * written in solid mode. Use both ::WIMLIB_WRITE_FLAG_REBUILD and
+ * ::WIMLIB_WRITE_FLAG_RECOMPRESS to force the entire WIM file be rebuilt with
+ * all streams recompressed in solid mode.
+ *
+ * Currently, new solid blocks will, by default, be written using LZMS
+ * compression with 32 MiB (33554432 byte) chunks. Use
+ * wimlib_set_output_pack_compression_type() and/or
+ * wimlib_set_output_pack_chunk_size() to change this. This is independent of
+ * the WIM's main compression type and chunk size; you can have a WIM that
+ * nominally uses LZX compression and 32768 byte chunks but actually contains
+ * LZMS-compressed solid blocks, for example. However, if including solid
+ * blocks, I suggest that you set the WIM's main compression type to LZMS as
+ * well, either by creating the WIM with
+ * ::wimlib_create_new_wim(::WIMLIB_COMPRESSION_TYPE_LZMS, ...) or by calling
+ * ::wimlib_set_output_compression_type(..., ::WIMLIB_COMPRESSION_TYPE_LZMS).
+ *
+ * This flag will be set by default when writing or overwriting a WIM file that
+ * either already contains packed streams, or has had packed streams exported
+ * into it and the WIM's main compression type is LZMS.
+ */
#define WIMLIB_WRITE_FLAG_PACK_STREAMS 0x00001000
/** @} */
* @return 0 on success; nonzero on error.
*
* @retval ::WIMLIB_ERR_ALREADY_LOCKED
- * A read-write mount was requested, but an an exclusive advisory lock on
+ * A read-write mount was requested, but an exclusive advisory lock on
* the on-disk WIM file could not be acquired because another thread or
* process has mounted an image from the WIM read-write or is currently
* modifying the WIM in-place.
* @ingroup G_writing_and_overwriting_wims
*
* Similar to wimlib_set_output_chunk_size(), but set the chunk size for writing
- * packed streams.
+ * packed streams (solid blocks).
*/
extern int
wimlib_set_output_pack_chunk_size(WIMStruct *wim, uint32_t chunk_size);
* An unknown operation type was specified in the update commands; or,
* attempted to execute an add command where ::WIMLIB_ADD_FLAG_NTFS was set
* in the @p add_flags, but the same image had previously already been
- * added from a NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
+ * added from an NTFS volume; or, both ::WIMLIB_ADD_FLAG_RPFIX and
* ::WIMLIB_ADD_FLAG_NORPFIX were specified in the @p add_flags for one add
* command; or, ::WIMLIB_ADD_FLAG_NTFS or ::WIMLIB_ADD_FLAG_RPFIX were
* specified in the @p add_flags for an add command in which @p
git://wimlib.net / wimlib / blobdiff