-/*
- * wimlib.h
- *
- * External header for wimlib.
+/**
+ * @file wimlib.h
+ * @brief External header for wimlib.
*
* This file contains extensive comments for generating documentation with
* Doxygen. The built HTML documentation can be viewed at
- * http://wimlib.sourceforge.net.
+ * http://wimlib.sourceforge.net. Make sure to see the <a
+ * href="modules.html">Modules page</a> to make more sense of the declarations
+ * in this header.
*/
/*
- * Copyright (C) 2012, 2013 Eric Biggers
+ * Copyright (C) 2012, 2013, 2014 Eric Biggers
*
* This file is part of wimlib, a library for working with WIM files.
*
* along with wimlib; if not, see http://www.gnu.org/licenses/.
*/
-/** \mainpage
+/**
+ * @mainpage
*
- * \section intro Introduction
+ * @section sec_intro Introduction
*
- * This is the documentation for the library interface of wimlib 1.5.0, a C
+ * This is the documentation for the library interface of wimlib 1.6.3, a C
* library for creating, modifying, extracting, and mounting files in the
* Windows Imaging Format. This documentation is intended for developers only.
* If you have installed wimlib and want to know how to use the @b wimlib-imagex
* program, please see the README file or manual pages.
*
- * \section starting Getting Started
+ * @section sec_installing_and_compiling Installing and Compiling
*
* wimlib uses the GNU autotools, so, on UNIX-like systems, it should be easy to
* install with <code>configure && make && sudo make install</code>; however,
- * please see the README for more information about installing it. To use
- * wimlib in a program after installing it, include @c wimlib.h and link your
- * program with @c -lwim.
+ * please see the README for more information about installing it.
+ *
+ * To use wimlib in your program after installing it, include wimlib.h and link
+ * your program with @c -lwim.
+ *
+ * As of wimlib 1.5.0, wimlib.h is also compatible with C++.
+ *
+ * Note: before calling any other function declared in wimlib.h,
+ * wimlib_global_init() can (and in some cases, must) be called. See its
+ * documentation for more details.
+ *
+ * @section sec_basic_wim_handling_concepts Basic WIM handling concepts
+ *
+ * wimlib wraps up a WIM file in an opaque ::WIMStruct structure. There are
+ * two ways to create such a structure: wimlib_open_wim(), which opens a WIM
+ * file and creates a ::WIMStruct representing it, and wimlib_create_new_wim(),
+ * which creates a new ::WIMStruct that initially contains no images and does
+ * not yet have a backing on-disk file. See @ref G_creating_and_opening_wims
+ * for more details.
+ *
+ * A WIM file, represented by a ::WIMStruct, contains zero or more images.
+ * Images can be extracted (or "applied") using wimlib_extract_image(), added
+ * (or "captured" or "appended") using wimlib_add_image(), deleted using
+ * wimlib_delete_image(), exported using wimlib_export_image(), and updated or
+ * modified using wimlib_update_image(). However, changes made to a WIM
+ * represented by a ::WIMStruct have no persistent effect until the WIM is
+ * actually written to an on-disk file. This can be done using wimlib_write(),
+ * but if the WIM was originally opened using wimlib_open_wim(), then
+ * wimlib_overwrite() can be used instead. See @ref G_extracting_wims, @ref
+ * G_modifying_wims, and @ref G_writing_and_overwriting_wims for more details.
+ *
+ * Note that with this ::WIMStruct abstraction, performing many tasks on WIM
+ * files is a multi-step process. For example, to add, or "append" an image to
+ * an existing stand-alone WIM file in a way similar to <b>wimlib-imagex
+ * append</b>, you must call the following functions:
+ *
+ * 1. wimlib_open_wim()
+ * 2. wimlib_add_image()
+ * 3. wimlib_overwrite()
+ *
+ * This design is very much on purpose as it makes the library more useful in
+ * general by allowing functions to be composed in different ways. For example,
+ * you can make multiple changes to a WIM and commit them all to the underlying
+ * file in only one overwrite operation, which is more efficient.
+ *
+ * @section sec_cleaning_up Cleaning up
+ *
+ * After you are done with any ::WIMStruct, you can call wimlib_free() to free
+ * all resources associated with it. Also, when you are completely done with
+ * using wimlib in your program, you can call wimlib_global_cleanup() to free
+ * any other resources allocated by the library.
+ *
+ * @section sec_error_handling Error Handling
+ *
+ * Most functions in wimlib return 0 on success and a positive error code on
+ * failure. Use wimlib_get_error_string() to get a string that describes an
+ * error code. wimlib also can print error messages to standard error itself
+ * when an error happens, and these may be more informative than the error code;
+ * to enable this, call wimlib_set_print_errors(). Please note that this is for
+ * convenience only, and some errors can occur without a message being printed.
+ * Currently, error messages and strings (as well as all documentation, for that
+ * matter) are only available in English.
+ *
+ * @section sec_encodings Locales and character encodings
*
- * wimlib wraps up a WIM file in an opaque ::WIMStruct structure. A ::WIMStruct
- * may represent either a stand-alone WIM or one part of a split WIM.
+ * To support Windows as well as UNIX-like systems, wimlib's API typically takes
+ * and returns strings of ::wimlib_tchar, which are in a platform-dependent
+ * encoding.
*
- * All functions in wimlib's public API are prefixed with @c wimlib. Most
- * return 0 on success and a positive error code on failure. Use
- * wimlib_get_error_string() to get a string that describes an error code.
- * wimlib also can print error messages itself when an error happens, and these
- * may be more informative than the error code; to enable this, call
- * wimlib_set_print_errors(). Please note that this is for convenience only,
- * and some errors can occur without a message being printed.
+ * On Windows, each ::wimlib_tchar is 2 bytes and is the same as a "wchar_t",
+ * and the encoding is UTF-16LE.
*
- * First before calling any other functions, you should call
- * wimlib_global_init() to initialize the library.
+ * On UNIX-like systems, each ::wimlib_tchar is 1 byte and is simply a "char",
+ * and the encoding is the locale-dependent multibyte encoding. I recommend you
+ * set your locale to a UTF-8 capable locale to avoid any issues. Also, by
+ * default, wimlib on UNIX will assume the locale is UTF-8 capable unless you
+ * call wimlib_global_init() after having set your desired locale.
*
- * To open an existing WIM, use wimlib_open_wim().
+ * @section sec_advanced Additional information and features
*
- * To create a new WIM that initially contains no images, use
- * wimlib_create_new_wim().
*
- * To add an image to a WIM file from a directory tree on your filesystem, call
- * wimlib_add_image(). This can be done with a ::WIMStruct gotten from
- * wimlib_open_wim() or from wimlib_create_new_wim(). On UNIX-like systems,
- * wimlib_add_image() can also capture a WIM image directly from a block device
- * containing a NTFS filesystem.
+ * @subsection subsec_mounting_wim_images Mounting WIM images
*
- * To extract an image from a WIM file, call wimlib_extract_image(). This can
- * be done either to a directory, or, on UNIX-like systems, directly to a block
- * device containing a NTFS filesystem.
+ * See @ref G_mounting_wim_images.
*
- * To extract individual files or directories from a WIM image, rather than a
- * full image, call wimlib_extract_files().
+ * @subsection subsec_progress_functions Progress Messages
*
- * To programatically make changes to a WIM image without mounting it, call
- * wimlib_update_image().
+ * See @ref G_progress.
*
- * On UNIX-like systems supporting FUSE (such as Linux), wimlib supports
- * mounting WIM files either read-only or read-write. Mounting is done using
- * wimlib_mount_image() and unmounting is done using wimlib_unmount_image().
- * Mounting can be done without root privileges because it is implemented using
- * FUSE (Filesystem in Userspace). If wimlib is compiled with the
- * <code>--without-fuse</code> flag, these functions will be available but will
- * fail with ::WIMLIB_ERR_UNSUPPORTED.
- *
- * After creating or modifying a WIM file, you can write it to a file using
- * wimlib_write(). Alternatively, if the WIM was originally read from a file
- * (using wimlib_open_wim() rather than wimlib_create_new_wim()), you can use
- * wimlib_overwrite() to overwrite the original file. Still alternatively, you
- * can write a WIM directly to a file descriptor by calling wimlib_write_to_fd()
- * instead.
+ * @subsection subsec_non_standalone_wims Non-standalone WIMs
*
- * wimlib supports a special "pipable" WIM format (which unfortunately is @b not
- * compatible with Microsoft's software). To create a pipable WIM, call
+ * See @ref G_nonstandalone_wims.
+ *
+ * @subsection subsec_pipable_wims Pipable WIMs
+ *
+ * wimlib supports a special "pipable" WIM format which unfortunately is @b not
+ * compatible with Microsoft's software. To create a pipable WIM, call
* wimlib_write(), wimlib_write_to_fd(), or wimlib_overwrite() with
* ::WIMLIB_WRITE_FLAG_PIPABLE specified. Pipable WIMs are pipable in both
* directions, so wimlib_write_to_fd() can be used to write a pipable WIM to a
* s using a seekable file descriptor using the regular function calls (e.g.
* wimlib_open_wim(), wimlib_extract_image()).
*
- * Please note: merely by calling wimlib_add_image() or many of the other
- * functions in this library that operate on ::WIMStruct's, you are @b not
- * modifying the WIM file on disk. Changes are not saved until you explicitly
- * call wimlib_write() or wimlib_overwrite().
- *
- * After you are done with the WIM file, use wimlib_free() to free all memory
- * associated with a ::WIMStruct and close all files associated with it.
- *
- * When you are completely done with using wimlib in your program, you should
- * call wimlib_global_cleanup().
+ * See the documentation for the <b>--pipable</b> flag of <b>wimlib-imagex
+ * capture</b> for more information about pipable WIMs.
*
- * A number of functions take a pointer to a progress function of type
- * ::wimlib_progress_func_t. This function will be called periodically during
- * the WIM operation(s) to report on the progress of the operation (for example,
- * how many bytes have been written so far).
+ * @subsection subsec_thread_safety Thread Safety
*
- * wimlib is thread-safe as long as different ::WIMStruct's are used, except for
- * the following exceptions:
+ * wimlib is thread-safe, with the following exceptions:
+ * - Different threads cannot operate on the same ::WIMStruct at the same time;
+ * they must use different ::WIMStruct's.
* - You must call wimlib_global_init() in one thread before calling any other
* functions.
* - wimlib_set_print_errors() and wimlib_set_memory_allocator() both apply globally.
* does so for the first time. This includes changing the working directory
* to the root directory.
*
- * \section encodings Locales and character encodings
- *
- * To support Windows as well as UNIX-like systems, wimlib's API typically takes
- * and returns strings of ::wimlib_tchar, which are in a platform-dependent
- * encoding.
- *
- * On Windows, each ::wimlib_tchar is 2 bytes and is the same as a "wchar_t",
- * and the encoding is UTF-16LE.
- *
- * On UNIX-like systems, each ::wimlib_tchar is 1 byte and is simply a "char",
- * and the encoding is the locale-dependent multibyte encoding. I recommend you
- * set your locale to a UTF-8 capable locale to avoid any issues. Also, by
- * default, wimlib on UNIX will assume the locale is UTF-8 capable unless you
- * call wimlib_global_init() after having set your desired locale.
- *
- * \section Limitations
+ * @subsection subsec_limitations Limitations
*
* This section documents some technical limitations of wimlib not already
* documented in the man page for @b wimlib-imagex.
*
* - The old WIM format from Vista pre-releases is not supported.
- * - Compressed resource chunk sizes other than 32768 are not supported. This
- * doesn't seem to be a real problem because the chunk size always seems to be
- * this value.
* - wimlib does not provide a clone of the @b PEImg tool, or the @b Dism
* functionality other than that already present in @b ImageX, that allows you
* to make certain Windows-specific modifications to a Windows PE image, such
- * as adding a driver or Windows component. Such a tool possibly could be
- * implemented on top of wimlib.
+ * as adding a driver or Windows component. Such a tool could be implemented
+ * on top of wimlib.
+ *
+ * @subsection more_info More information
+ *
+ * You are advised to read the README as well as the manual pages for
+ * <b>wimlib-imagex</b>, since not all relevant information is repeated here in
+ * the API documentation.
+ */
+
+/** @defgroup G_general General
+ *
+ * @brief Declarations and structures shared across the library.
+ */
+
+/** @defgroup G_creating_and_opening_wims Creating and Opening WIMs
+ *
+ * @brief Create new WIMs and open existing WIMs.
+ */
+
+/** @defgroup G_wim_information Retrieving WIM information and directory listings
+ *
+ * @brief Retrieve information about a WIM or WIM image.
+ */
+
+/** @defgroup G_modifying_wims Modifying WIMs
+ *
+ * @brief Make changes to a WIM.
+ *
+ * @section sec_adding_images Capturing and adding WIM images
+ *
+ * As described in @ref sec_basic_wim_handling_concepts, capturing a new WIM or
+ * appending an image to an existing WIM is a multi-step process, but at its
+ * core is wimlib_add_image() or an equivalent function. Normally,
+ * wimlib_add_image() takes an on-disk directory tree and logically adds it to a
+ * ::WIMStruct as a new image. However, when supported by the build of the
+ * library, there is also a special NTFS volume capture mode (entered when
+ * ::WIMLIB_ADD_FLAG_NTFS is specified) that allows adding the image directly
+ * from an unmounted NTFS volume.
+ *
+ * Another function, wimlib_add_image_multisource() is also provided. It
+ * generalizes wimlib_add_image() to allow combining multiple files or directory
+ * trees into a single WIM image in a configurable way.
+ *
+ * For maximum customization of WIM image creation, it is also possible to add a
+ * completely empty WIM image with wimlib_add_empty_image(), then update it with
+ * wimlib_update_image(). (This is in fact what wimlib_add_image() and
+ * wimlib_add_image_multisource() do internally.)
+ *
+ * Note that some details of how image addition/capture works are documented
+ * more fully in the manual page for <b>wimlib-imagex capture</b>.
+ *
+ * @section sec_deleting_images Deleting WIM images
+ *
+ * wimlib_delete_image() can delete an image from a ::WIMStruct. But as usual,
+ * wimlib_write() or wimlib_overwrite() must be called to cause the changes to
+ * be made persistent in an on-disk WIM file.
+ *
+ * @section sec_exporting_images Exporting WIM images
+ *
+ * wimlib_export_image() can copy, or "export", an image from one WIM to
+ * another.
+ *
+ * @section sec_other_modifications Other modifications
+ *
+ * wimlib_update_image() can add, delete, and rename files in a WIM image.
+ *
+ * wimlib_set_image_name(), wimlib_set_image_descripton(), and
+ * wimlib_set_image_flags() can change other image metadata.
+ *
+ * wimlib_set_wim_info() can change information about the WIM file itself, such
+ * as the boot index.
+ */
+
+/** @defgroup G_extracting_wims Extracting WIMs
+ *
+ * @brief Extract files, directories, and images from a WIM.
+ *
+ * wimlib_extract_image() extracts, or "applies", an image from a WIM,
+ * represented by a ::WIMStruct. This normally extracts the image to a
+ * directory, but when supported by the build of the library there is also a
+ * special NTFS volume extraction mode (entered when ::WIMLIB_EXTRACT_FLAG_NTFS
+ * is specified) that allows extracting a WIM image directly to an unmounted
+ * NTFS volume. Various other flags allow further customization of image
+ * extraction.
+ *
+ * wimlib_extract_paths() and wimlib_extract_pathlist() allow extracting a list
+ * of (possibly wildcard) paths from a WIM image.
+ *
+ * wimlib_extract_image_from_pipe() extracts an image from a pipable WIM sent
+ * over a pipe; see @ref subsec_pipable_wims.
+ *
+ * Some details of how WIM extraction works are documented more fully in the
+ * manual pages for <b>wimlib-imagex apply</b> and <b>wimlib-imagex extract</b>.
+ */
+
+/** @defgroup G_mounting_wim_images Mounting WIM images
+ *
+ * @brief Mount and unmount WIM images.
+ *
+ * On UNIX-like systems supporting FUSE (such as Linux), wimlib supports
+ * mounting images from WIM files either read-only or read-write. To mount an
+ * image, call wimlib_mount_image(). To unmount an image, call
+ * wimlib_unmount_image(). Mounting can be done without root privileges because
+ * it is implemented using FUSE (Filesystem in Userspace). If wimlib is
+ * compiled with the <code>--without-fuse</code> flag, these functions will be
+ * available but will fail with ::WIMLIB_ERR_UNSUPPORTED. Note that mounting an
+ * image read-write is an alternative to calling wimlib_update_image().
+ */
+
+/** @defgroup G_progress Progress Messages
+ *
+ * @brief Track the progress of long WIM operations.
+ *
+ * When operating on large archives, operations such as extraction will
+ * naturally take a while to complete. Because of this and to improve the
+ * potential user-friendliness of library clients, a number of functions take a
+ * pointer to a progress function of type ::wimlib_progress_func_t. This
+ * function will be called periodically during the WIM operation(s) to report on
+ * the progress of the operation (for example, how many bytes have been written
+ * so far).
+ */
+
+/** @defgroup G_writing_and_overwriting_wims Writing and Overwriting WIMs
+ *
+ * @brief Write and overwrite on-disk WIM files.
+ *
+ * As described in @ref sec_basic_wim_handling_concepts, these functions are
+ * critical to the design of the library as they allow new or modified WIMs to
+ * actually be written to on-disk files. Generally, wimlib_write() is the
+ * function you need to call to write a new WIM file, and wimlib_overwrite() is
+ * the function you need to call to persistently update an existing WIM file.
+ */
+
+/** @defgroup G_nonstandalone_wims Creating and handling non-standalone WIMs
+ *
+ * @brief Create and handle non-standalone WIMs, such as split and delta WIMs.
+ *
+ * Normally, ::WIMStruct represents a WIM file, but there's a bit more to it
+ * than that. Normally, WIM files are "standalone". However, WIM files can
+ * also be arranged in non-standalone ways, such as a set of on-disk files that
+ * together form a single "split WIM" or "delta WIM". Such arrangements are
+ * fully supported by wimlib. However, as a result, in such cases a ::WIMStruct
+ * created from one of these on-disk files initially only partially represents
+ * the full WIM and needs to, in effect, be logically combined with other
+ * ::WIMStruct's before performing certain operations, such as extracting files
+ * with wimlib_extract_image() or wimlib_extract_paths(). This is done by
+ * calling wimlib_reference_resource_files() or wimlib_reference_resources().
+ *
+ * wimlib_write() can create delta WIMs as well as standalone WIMs, but a
+ * specialized function (wimlib_split()) is needed to create a split WIM.
*/
#ifndef _WIMLIB_H
#include <inttypes.h>
#include <time.h>
-/** Major version of the library (for example, the 1 in 1.2.5). */
+/** @ingroup G_general
+ * @{ */
+
+/** Major version of the library (for example, the 1 in 1.2.5). */
#define WIMLIB_MAJOR_VERSION 1
/** Minor version of the library (for example, the 2 in 1.2.5). */
-#define WIMLIB_MINOR_VERSION 5
+#define WIMLIB_MINOR_VERSION 6
/** Patch version of the library (for example, the 5 in 1.2.5). */
-#define WIMLIB_PATCH_VERSION 0
+#define WIMLIB_PATCH_VERSION 3
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @} */
+/** @ingroup G_general
+ * @{ */
/**
* Opaque structure that represents a WIM file. This is an in-memory structure
*
* Use wimlib_write() or wimlib_overwrite() to actually write an on-disk WIM
* file from a ::WIMStruct.
+ *
+ * See @ref sec_basic_wim_handling_concepts for more information.
*/
#ifndef WIMLIB_WIMSTRUCT_DECLARED
typedef struct WIMStruct WIMStruct;
#ifdef __WIN32__
typedef wchar_t wimlib_tchar;
#else
-/** See \ref encodings */
+/** See @ref sec_encodings */
typedef char wimlib_tchar;
#endif
# define WIMLIB_WIM_PATH_SEPARATOR_STRING "/"
#endif
+/** Use this to specify the root directory of the WIM image. */
+#define WIMLIB_WIM_ROOT_PATH WIMLIB_WIM_PATH_SEPARATOR_STRING
+
+/** Use this to test if the specified path refers to the root directory of the
+ * WIM image. */
+#define WIMLIB_IS_WIM_ROOT_PATH(path) \
+ ((path)[0] == WIMLIB_WIM_PATH_SEPARATOR && \
+ (path)[1] == 0)
+
#ifdef __GNUC__
# define _wimlib_deprecated __attribute__((deprecated))
#else
/** The WIM does not include any compressed resources. */
WIMLIB_COMPRESSION_TYPE_NONE = 0,
+ /** Compressed resources in the WIM use XPRESS compression. */
+ WIMLIB_COMPRESSION_TYPE_XPRESS = 1,
+
/** Compressed resources in the WIM use LZX compression. */
- WIMLIB_COMPRESSION_TYPE_LZX = 1,
+ WIMLIB_COMPRESSION_TYPE_LZX = 2,
- /** Compressed resources in the WIM use XPRESS compression. */
- WIMLIB_COMPRESSION_TYPE_XPRESS = 2,
+ /** Compressed resources in the WIM use LZMS compression. Note: LZMS
+ * compression is only compatible with wimlib v1.6.0 and later and with
+ * WIMGAPI Windows 8 and later (and some restrictions apply on the
+ * latter). */
+ WIMLIB_COMPRESSION_TYPE_LZMS = 3,
};
+/** @} */
+/** @ingroup G_progress
+ * @{ */
+
/** Possible values of the first parameter to the user-supplied
* ::wimlib_progress_func_t progress function */
enum wimlib_progress_msg {
/** A WIM image is about to be extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
+ * ::wimlib_progress_info.extract. This message is received once per
+ * image for calls to wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe(). */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN = 0,
- /** A file or directory tree within a WIM image (not the full image) is
- * about to be extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
+ /** One or more file or directory trees within a WIM image is about to
+ * be extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This message is received only once per wimlib_extract_paths() and
+ * wimlib_extract_pathlist(), since wimlib combines all paths into a
+ * single extraction operation for optimization purposes. */
WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
- /** The directory structure of the WIM image is about to be extracted.
- * @p info will point to ::wimlib_progress_info.extract. */
+ /** The directory structure and other preliminary metadata is about to
+ * be extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This message is received once after either
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN or
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN. */
WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
- /** The directory structure of the WIM image has been successfully
- * extracted. @p info will point to ::wimlib_progress_info.extract. */
+ /** Confirms that the directory structure and other preliminary metadata
+ * has been successfully extracted. @p info will point to
+ * ::wimlib_progress_info.extract. This message is paired with a
+ * preceding ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN message.
+ */
WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
- /** The WIM image's files resources are currently being extracted. @p
- * info will point to ::wimlib_progress_info.extract. */
+ /** File data is currently being extracted. @p info will point to
+ * ::wimlib_progress_info.extract. This is the main message to track
+ * the progress of an extraction operation. */
WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
/** Starting to read a new part of a split pipable WIM over the pipe.
* @p info will point to ::wimlib_progress_info.extract. */
WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
- /** All the WIM files and directories have been extracted, and
- * timestamps are about to be applied. @p info will point to
- * ::wimlib_progress_info.extract. */
+ /** All data for WIM files and directories have been extracted, and
+ * final metadata such as timestamps is about to be extracted. @p info
+ * will point to ::wimlib_progress_info.extract. This message is
+ * received once before ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END or
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END. */
WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS,
- /** A WIM image has been successfully extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
+ /** Confirms that the image has been successfully extracted. @p info
+ * will point to ::wimlib_progress_info.extract. This is paired with
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN. */
WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END,
- /** A file or directory tree within a WIM image (not the full image) has
- * been successfully extracted. @p info will point to
- * ::wimlib_progress_info.extract. */
+ /** Confirms that the files or directory trees have been successfully
+ * extracted. @p info will point to ::wimlib_progress_info.extract.
+ * This is paired with ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN. */
WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
- /** The directory or NTFS volume is about to be scanned to build a tree
- * of WIM dentries in-memory. @p info will point to
- * ::wimlib_progress_info.scan. */
+ /** The directory or NTFS volume is about to be scanned for metadata.
+ * @p info will point to ::wimlib_progress_info.scan. This message is
+ * received once per call to wimlib_add_image(), or once per capture
+ * source passed to wimlib_add_image_multisource(), or once per add
+ * command passed to wimlib_update_image(). */
WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
- /** A directory or file is being scanned. @p info will point to
+ /** A directory or file has been scanned. @p info will point to
* ::wimlib_progress_info.scan, and its @p cur_path member will be
- * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE
- * is passed to wimlib_add_image(). */
+ * valid. This message is only sent if ::WIMLIB_ADD_FLAG_VERBOSE has
+ * been specified. */
WIMLIB_PROGRESS_MSG_SCAN_DENTRY,
- /** The directory or NTFS volume has been successfully scanned, and a
- * tree of WIM dentries has been built in-memory. @p info will point to
- * ::wimlib_progress_info.scan. */
+ /** Confirms that the directory or NTFS volume has been successfully
+ * scanned. @p info will point to ::wimlib_progress_info.scan. This is
+ * paired with a previous ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN message,
+ * possibly with many intervening ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY
+ * messages. */
WIMLIB_PROGRESS_MSG_SCAN_END,
- /**
- * File resources are currently being written to the WIM.
- * @p info will point to ::wimlib_progress_info.write_streams. */
+ /** File resources ("streams") are currently being written to the WIM.
+ * @p info will point to ::wimlib_progress_info.write_streams. This
+ * message may be received many times while the WIM file is being
+ * written or appended to with wimlib_write(), wimlib_overwrite(), or
+ * wimlib_write_to_fd(). */
WIMLIB_PROGRESS_MSG_WRITE_STREAMS,
- /**
- * The metadata resource for each image is about to be written to the
- * WIM. @p info will not be valid. */
+ /** Per-image metadata is about to be written to the WIM file. @p info
+ * will not be valid. */
WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN,
- /**
- * The metadata resource for each image has successfully been writen to
- * the WIM. @p info will not be valid. */
+ /** Confirms that per-image metadata has been successfully been written
+ * to the WIM file. @p info will not be valid. This message is paired
+ * with a preceding ::WIMLIB_PROGRESS_MSG_WRITE_METADATA_BEGIN message.
+ */
WIMLIB_PROGRESS_MSG_WRITE_METADATA_END,
- /**
- * The temporary file has successfully been renamed to the original WIM
- * file. Only happens when wimlib_overwrite() is called and the
- * overwrite is not done in-place.
- * @p info will point to ::wimlib_progress_info.rename. */
+ /** wimlib_overwrite() has successfully renamed the temporary file to
+ * the original WIM file, thereby committing the update. @p info will
+ * point to ::wimlib_progress_info.rename. Note: this message is not
+ * received if wimlib_overwrite() chose to append to the WIM file
+ * in-place. */
WIMLIB_PROGRESS_MSG_RENAME,
- /** The contents of the WIM are being checked against the integrity
- * table. Only happens when wimlib_open_wim() is called with the
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY flag. @p info will point to
- * ::wimlib_progress_info.integrity. */
+ /** The contents of the WIM file are being checked against the integrity
+ * table. @p info will point to ::wimlib_progress_info.integrity. This
+ * message is only received (and may be received many times) when
+ * wimlib_open_wim() is called with the
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY flag. */
WIMLIB_PROGRESS_MSG_VERIFY_INTEGRITY,
/** An integrity table is being calculated for the WIM being written.
- * Only happens when wimlib_write() or wimlib_overwrite() is called with
- * the ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY flag. @p info will point to
- * ::wimlib_progress_info.integrity. */
+ * @p info will point to ::wimlib_progress_info.integrity. This message
+ * is only received (and may be received many times) when a WIM file is
+ * being written with the flag ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
WIMLIB_PROGRESS_MSG_CALC_INTEGRITY,
- /** Reserved. (Previously used for WIMLIB_PROGRESS_MSG_JOIN_STREAMS,
- * but in wimlib v1.5.0 this was removed to simplify the code and now
- * you'll get ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS messages instead.) */
+ /** Reserved. */
WIMLIB_PROGRESS_MSG_RESERVED,
/** A wimlib_split() operation is in progress, and a new split part is
* about to be started. @p info will point to
- * ::wimlib_progress_info.split. */
+ * ::wimlib_progress_info.split. */
WIMLIB_PROGRESS_MSG_SPLIT_BEGIN_PART,
/** A wimlib_split() operation is in progress, and a split part has been
- * finished. @p info will point to ::wimlib_progress_info.split. */
+ * finished. @p info will point to ::wimlib_progress_info.split. */
WIMLIB_PROGRESS_MSG_SPLIT_END_PART,
- /**
- * A WIM update command is just about to be executed; @p info will point
- * to ::wimlib_progress_info.update.
- */
+ /** A WIM update command is just about to be executed. @p info will
+ * point to ::wimlib_progress_info.update. This message is received
+ * once per update command when wimlib_update_image() is called with the
+ * flag ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS. */
WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND,
- /**
- * A WIM update command has just been executed; @p info will point to
- * ::wimlib_progress_info.update.
- */
+ /** A WIM update command has just been executed. @p info will point to
+ * ::wimlib_progress_info.update. This message is received once per
+ * update command when wimlib_update_image() is called with the flag
+ * ::WIMLIB_UPDATE_FLAG_SEND_PROGRESS. */
WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND,
+ /** A file in the WIM image is being replaced as a result of a
+ * ::wimlib_add_command without ::WIMLIB_ADD_FLAG_NO_REPLACE specified.
+ * @p info will point to ::wimlib_progress_info.replace. This is only
+ * received when ::WIMLIB_ADD_FLAG_VERBOSE is also specified in the add
+ * command. */
+ WIMLIB_PROGRESS_MSG_REPLACE_FILE_IN_WIM,
+
+ /** A WIM image is being applied with ::WIMLIB_EXTRACT_FLAG_WIMBOOT, and
+ * a file is being extracted normally (not as a WIMBoot "pointer file")
+ * due to it matching a pattern in the [PrepopulateList] section of the
+ * configuration file \Windows\System32\WimBootCompress.ini in the WIM
+ * image. @info will point to ::wimlib_progress_info.wimboot_exclude.
+ */
+ WIMLIB_PROGRESS_MSG_WIMBOOT_EXCLUDE,
};
/** A pointer to this union is passed to the user-supplied
/* N.B. I wanted these to be anonymous structs, but Doxygen won't
* document them if they aren't given a name... */
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS. */
+ /** Valid on the message ::WIMLIB_PROGRESS_MSG_WRITE_STREAMS. This is
+ * the primary message for tracking the progress of writing a WIM file.
+ */
struct wimlib_progress_info_write_streams {
- /** Number of bytes that are going to be written for all the
- * streams combined. This is the amount in uncompressed data.
- * (The actual number of bytes will be less if the data is being
- * written compressed.) */
+ /** Total number of uncompressed bytes of stream data being
+ * written. This can be thought of as the total uncompressed
+ * size of the files being archived, with some caveats. WIM
+ * files use single-instance streams, so the size provided here
+ * only counts distinct streams, except for the following
+ * exception: the size provided here may include the sizes of
+ * all newly added (e.g. with wimlib_add_image() streams,
+ * pending automatic de-duplication during the write operation
+ * itself. When each such stream de-duplication occurs, this
+ * number will be decreased by the size of the duplicate stream
+ * that need not be written.
+ *
+ * In the case of a wimlib_overwrite() that the library opted to
+ * perform in-place, both @p total_streams and @p total_bytes
+ * will only count the streams actually being written and not
+ * pre-existing streams in the WIM file. */
uint64_t total_bytes;
- /** Number of streams that are going to be written. */
+ /** Total number of streams being written. This can be thought
+ * of as the total number of files being archived, with some
+ * caveats. In general, a single file or directory may contain
+ * multiple data streams, each of which will be represented
+ * separately in this number. Furthermore, WIM files use
+ * single-instance streams, so the stream count provided here
+ * only counts distinct streams, except for the following
+ * exception: the stream count provided here may include newly
+ * added (e.g. with wimlib_add_image() streams, pending
+ * automatic de-duplication during the write operation itself.
+ * When each such stream de-duplication occurs, this number will
+ * be decreased by 1 to account for the duplicate stream that
+ * need not be written. */
uint64_t total_streams;
- /** Number of uncompressed bytes that have been written so far.
- * Will be 0 initially, and equal to @p total_bytes at the end.
- * */
+ /** Number of uncompressed bytes of stream data that have been
+ * written so far. This number be 0 initially, and will be
+ * equal to @p total_bytes at the end of the write operation.
+ * Note that @p total_bytes (but not @p completed_bytes) may
+ * decrease throughout the write operation due to the discovery
+ * of stream duplications. */
uint64_t completed_bytes;
- /** Number of streams that have been written. Will be 0
- * initially, and equal to @p total_streams at the end. */
+ /** Number of streams that have been written so far. This
+ * number will be 0 initially, and will be equal to @p
+ * total_streams at the end of the write operation. Note that
+ * @p total_streams (but not @p completed_streams) may decrease
+ * throughout the write operation due to the discovery of stream
+ * duplications.
+ *
+ * For applications that wish to calculate a simple "percent
+ * complete" for the write operation, it will likely be more
+ * accurate to calculate the percentage from @p completed_bytes
+ * and @p total_bytes rather than @p completed_streams and
+ * @p total_streams because the time for the operation to
+ * complete is mainly determined by the number of bytes that
+ * need to be read, compressed, and written, not just the number
+ * of files being archived. */
uint64_t completed_streams;
- /** Number of threads that are being used to compress resources
- * (if applicable). */
- unsigned num_threads;
+ /** Number of threads that are being used to compress streams,
+ * or 1 if streams are being written uncompressed. */
+ uint32_t num_threads;
- /** The compression type being used to write the streams; either
- * ::WIMLIB_COMPRESSION_TYPE_NONE,
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS, or
- * ::WIMLIB_COMPRESSION_TYPE_LZX. */
- int compression_type;
+ /** The compression type being used to write the streams, as one
+ * of the ::wimlib_compression_type constants. */
+ int32_t compression_type;
/** Number of split WIM parts from which streams are being
- * written (may be 0 if irrelevant). */
- unsigned total_parts;
+ * written (may be 0 if irrelevant). */
+ uint32_t total_parts;
- /** Number of split WIM parts from which streams have been
- * written (may be 0 if irrelevant). */
- unsigned completed_parts;
+ /** This is currently broken and will always be 0. */
+ uint32_t completed_parts;
} write_streams;
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY, and
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
struct wimlib_progress_info_scan {
- /** Directory or NTFS volume that is being scanned. */
+ /** Top-level directory being scanned; or, when capturing a NTFS
+ * volume with ::WIMLIB_ADD_FLAG_NTFS, this is instead the path
+ * to the file or block device that contains the NTFS volume
+ * being scanned. */
const wimlib_tchar *source;
- /** Path to the file or directory that is about to be scanned,
- * relative to the root of the image capture or the NTFS volume.
- * */
+ /** Path to the file (or directory) that has been scanned, valid
+ * on ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. When capturing a NTFS
+ * volume with ::WIMLIB_ADD_FLAG_NTFS, this path will be
+ * relative to the root of the NTFS volume. */
const wimlib_tchar *cur_path;
+ /** Dentry scan status, valid on
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY. */
enum {
- /** File or directory looks okay and will be captured. */
+ /** The file looks okay and will be captured. */
WIMLIB_SCAN_DENTRY_OK = 0,
- /** File or directory is being excluded from capture due
- * to the capture configuration file. */
+ /** File is being excluded from capture due to the
+ * capture configuration. */
WIMLIB_SCAN_DENTRY_EXCLUDED,
- /** File or directory is being excluded from capture due
- * to being unsupported (e.g. an encrypted or device
- * file). */
+ /** File is being excluded from capture due to being
+ * unsupported (e.g. an encrypted or device file). */
WIMLIB_SCAN_DENTRY_UNSUPPORTED,
+
+ /** The file is an absolute symbolic link or junction
+ * point and it is being excluded from capture because
+ * it points outside of the capture directory and
+ * reparse-point fixups are enabled. (Reparse point
+ * fixups can be disabled by using the flag
+ * ::WIMLIB_ADD_FLAG_NORPFIX.) */
+ WIMLIB_SCAN_DENTRY_EXCLUDED_SYMLINK,
} status;
- /** Target path in the WIM. Only valid on messages
- * ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
- * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
- const wimlib_tchar *wim_target_path;
+ union {
+ /** Target path in the WIM image. Only valid on
+ * messages ::WIMLIB_PROGRESS_MSG_SCAN_BEGIN and
+ * ::WIMLIB_PROGRESS_MSG_SCAN_END. */
+ const wimlib_tchar *wim_target_path;
+
+ /** For ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY and a status
+ * of @p WIMLIB_SCAN_DENTRY_EXCLUDED_SYMLINK, this is
+ * the target of the absolute symbolic link or junction
+ * point. */
+ const wimlib_tchar *symlink_target;
+ };
+
+ /** Number of directories scanned so far, including the root
+ * directory but excluding any unsupported/excluded directories.
+ *
+ * Details: On Windows and in NTFS capture mode, a reparse point
+ * counts as a directory if and only if it has
+ * FILE_ATTRIBUTE_DIRECTORY set. Otherwise, a symbolic link
+ * counts as a directory if and only if when fully dereferenced
+ * it points to an accessible directory. If a file has multiple
+ * names (hard links), it is only counted one time. */
+ uint64_t num_dirs_scanned;
+
+ /** Number of non-directories scanned so far, excluding any
+ * unsupported/excluded files.
+ *
+ * Details: On Windows and in NTFS capture mode, a reparse point
+ * counts as a non-directory if and only if it does not have
+ * FILE_ATTRIBUTE_DIRECTORY set. Otherwise, a symbolic link
+ * counts as a non-directory if and only if when fully
+ * dereferenced it points to a non-directory or its target is
+ * inaccessible. If a file has multiple names (hard links), it
+ * is only counted one time. */
+ uint64_t num_nondirs_scanned;
+
+ /** Number of bytes of file data that have been detected so far.
+ *
+ * Details: This data may not actually have been read yet, and
+ * it will not actually be written to the WIM file until
+ * wimlib_write() or wimlib_overwrite() has been called. Data
+ * from excluded files is not counted. This number includes
+ * default file contents as well as named data streams and
+ * reparse point data. The size of reparse point data is
+ * tallied after any reparse-point fixups, and in the case of
+ * capturing a symbolic link on a UNIX-like system, the creation
+ * of the reparse point data itself. If a file has multiple
+ * names (hard links), its size(s) are only counted one time.
+ * On Windows, encrypted files have their encrypted size
+ * counted, not their unencrypted size; however, compressed
+ * files have their uncompressed size counted. */
+ uint64_t num_bytes_scanned;
} scan;
- /** Valid on messages ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
+ /** Valid on messages
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_BEGIN,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_BEGIN,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
* ::WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END,
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS, and
- * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END. */
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_TREE_END,
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_IMAGE_END, and
+ * ::WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS.
+ *
+ * Note: most of the time of an extraction operation will be spent
+ * extracting streams, and the application will receive
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS during this time. Using @p
+ * completed_bytes and @p total_bytes, the application can calculate a
+ * percentage complete. However, note that this message does not, in
+ * general, actually provide information about which "file" is currently
+ * being extracted. This is because wimlib, by default, extracts the
+ * individual data streams in whichever order it determines to be the
+ * most efficient.
+ */
struct wimlib_progress_info_extract {
- /** Number of the image being extracted (1-based). */
- int image;
+ /** Number of the image from which files are being extracted
+ * (1-based). */
+ uint32_t image;
- /** Flags passed to to wimlib_extract_image() */
- int extract_flags;
+ /** Extraction flags being used. */
+ uint32_t extract_flags;
- /** Full path to the WIM file being extracted. */
+ /** Full path to the WIM file from which files are being
+ * extracted, or @c NULL if the WIMStruct has no associated
+ * on-disk file. */
const wimlib_tchar *wimfile_name;
- /** Name of the image being extracted. */
+ /** Name of the image from which files are being extracted, or
+ * the empty string if the image is unnamed. */
const wimlib_tchar *image_name;
- /** Directory or NTFS volume to which the image is being
- * extracted. */
+ /** Path to the directory or NTFS volume to which the files are
+ * being extracted. */
const wimlib_tchar *target;
/** Reserved. */
- const wimlib_tchar *cur_path;
+ const wimlib_tchar *reserved;
/** Number of bytes of uncompressed data that will be extracted.
- * Takes into account hard links (they are not counted for each
- * link.) */
+ * If a file has multiple names (hard links), its size (or
+ * sizes, in the case of named data streams) is only counted one
+ * time. For "reparse points" and symbolic links, the size to
+ * be extracted is the size of the reparse data buffer.
+ *
+ * This number will stay constant throughout the extraction. */
uint64_t total_bytes;
- /** Number of bytes that have been written so far. Will be 0
- * initially, and equal to @p total_bytes at the end. */
+ /** Number of bytes of uncompressed data that have been
+ * extracted so far. This initially be 0 and will equal to @p
+ * total_bytes at the end of the extraction. */
uint64_t completed_bytes;
- /** Number of streams that will be extracted. This may more or
- * less than the number of "files" to be extracted due to
- * special cases (hard links, symbolic links, and alternate data
- * streams.) */
+ /** Number of (not necessarily unique) streams that will be
+ * extracted. This may be more or less than the number of
+ * "files" to be extracted due to hard links as well as
+ * potentially multiple streams per file (named data streams).
+ * A "stream" may be the default contents of a file, a named
+ * data stream, or a reparse data buffer. */
uint64_t num_streams;
- /** Path to the root dentry within the WIM for the tree that is
- * being extracted. Will be the empty string when extracting a
- * full image. */
- const wimlib_tchar *extract_root_wim_source_path;
+ /** Reserved. */
+ const wimlib_tchar *reserved_2;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
-
- unsigned part_number;
+ uint32_t part_number;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
- unsigned total_parts;
+ uint32_t total_parts;
/** Currently only used for
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN. */
* finished (::WIMLIB_PROGRESS_MSG_SPLIT_END_PART). */
const wimlib_tchar *part_name;
} split;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_REPLACE_FILE_IN_WIM */
+ struct wimlib_progress_info_replace {
+ /** Path to the file in the WIM image that is being replaced */
+ const wimlib_tchar *path_in_wim;
+ } replace;
+
+ /** Valid on messages ::WIMLIB_PROGRESS_MSG_WIMBOOT_EXCLUDE */
+ struct wimlib_progress_info_wimboot_exclude {
+ /** Path to the file in the WIM image */
+ const wimlib_tchar *path_in_wim;
+
+ /** Path to which the file is being extracted */
+ const wimlib_tchar *extraction_path;
+ } wimboot_exclude;
};
/** A user-supplied function that will be called periodically during certain WIM
typedef int (*wimlib_progress_func_t)(enum wimlib_progress_msg msg_type,
const union wimlib_progress_info *info);
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
+
/** An array of these structures is passed to wimlib_add_image_multisource() to
* specify the sources from which to create a WIM image. */
struct wimlib_capture_source {
* filesystem to be included in the WIM image. */
wimlib_tchar *fs_source_path;
- /** Destination path in the WIM image. Leading and trailing slashes are
- * ignored. The empty string or @c NULL means the root directory of the
- * WIM image. */
+ /** Destination path in the WIM image. Use ::WIMLIB_WIM_ROOT_PATH to
+ * specify the root directory of the WIM image. */
wimlib_tchar *wim_target_path;
/** Reserved; set to 0. */
long reserved;
};
-/** Structure that specifies a list of path patterns. */
-struct wimlib_pattern_list {
- /** Array of patterns. The patterns may be modified by library code,
- * but the @p pats pointer itself will not. See the man page for
- * <b>wimlib-imagex capture</b> for more information about allowed
- * patterns. */
- wimlib_tchar **pats;
-
- /** Number of patterns in the @p pats array. */
- size_t num_pats;
-
- /** Ignored; may be used by the calling code. */
- size_t num_allocated_pats;
-};
-
-/** A structure that contains lists of wildcards that match paths to treat
- * specially when capturing a WIM image. */
-struct wimlib_capture_config {
- /** Paths matching any pattern this list are excluded from being
- * captured, except if the same path appears in @p
- * exclusion_exception_pats. */
- struct wimlib_pattern_list exclusion_pats;
-
- /** Paths matching any pattern in this list are never excluded from
- * being captured. */
- struct wimlib_pattern_list exclusion_exception_pats;
-
- /** Reserved for future capture configuration options. */
- struct wimlib_pattern_list reserved1;
-
- /** Reserved for future capture configuration options. */
- struct wimlib_pattern_list reserved2;
-
- /** Library internal use only. */
- wimlib_tchar *_prefix;
-
- /** Library internal use only. */
- size_t _prefix_num_tchars;
-};
-
/** Set or unset the WIM header flag that marks it read-only
* (WIM_HDR_FLAG_READONLY in Microsoft's documentation), based on the
* ::wimlib_wim_info.is_marked_readonly member of the @p info parameter. This
* reparse-point fixups by default when capturing or applying WIM images. */
#define WIMLIB_CHANGE_RPFIX_FLAG 0x00000008
+/** @} */
+/** @ingroup G_wim_information
+ * @{ */
+
/** General information about a WIM file. */
struct wimlib_wim_info {
/** Chunk size used for compression. */
uint32_t chunk_size;
- /** 1-based index of this part within a split WIM, or 1 if the WIM is
- * standalone. */
+ /** For split WIMs, the 1-based index of this part within the split WIM;
+ * otherwise 1. */
uint16_t part_number;
- /** Total number of parts in the split WIM, or 1 if the WIM is
- * standalone. */
+ /** For split WIMs, the total number of parts in the split WIM;
+ * otherwise 1. */
uint16_t total_parts;
/** One of the ::wimlib_compression_type values that specifies the
uint32_t reserved[9];
};
-/** Information about a unique resource in the WIM file.
- */
+/** Information about a unique stream in the WIM file. (A stream is the same
+ * thing as a "resource", except in the case of packed resources.) */
struct wimlib_resource_entry {
- /** Uncompressed size of the resource in bytes. */
+ /** Uncompressed size of the stream in bytes. */
uint64_t uncompressed_size;
- /** Compressed size of the resource in bytes. This will be the same as
- * @p uncompressed_size if the resource is uncompressed. */
+ /** Compressed size of the stream in bytes. This will be the same as @p
+ * uncompressed_size if the stream is uncompressed. Or, if @p
+ * is_packed_streams is 1, this will be 0. */
uint64_t compressed_size;
- /** Offset, in bytes, of this resource from the start of the WIM file.
+ /** Offset, in bytes, of this stream from the start of the WIM file. Or
+ * if @p packed is 1, then this is actually the offset at which this
+ * stream begins in the uncompressed contents of the packed resource.
*/
uint64_t offset;
- /** SHA1 message digest of the resource's uncompressed contents. */
+ /** SHA1 message digest of the stream's uncompressed contents. */
uint8_t sha1_hash[20];
- /** Which part number of the split WIM this resource is in. This should
+ /** Which part number of the split WIM this stream is in. This should
* be the same as the part number provided by wimlib_get_wim_info(). */
uint32_t part_number;
- /** Number of times this resource is referenced over all WIM images. */
+ /** Number of times this stream is referenced over all WIM images. */
uint32_t reference_count;
- /** 1 if this resource is compressed. */
+ /** 1 if this stream is compressed. */
uint32_t is_compressed : 1;
- /** 1 if this resource is a metadata resource rather than a file
- * resource. */
+ /** 1 if this stream is a metadata resource rather than a file resource.
+ * */
uint32_t is_metadata : 1;
uint32_t is_free : 1;
uint32_t is_spanned : 1;
- uint32_t reserved_flags : 28;
- uint64_t reserved[4];
+
+ /** 1 if this stream was not found in the lookup table of the
+ * ::WIMStruct. This normally implies a missing call to
+ * wimlib_reference_resource_files() or wimlib_reference_resources().
+ * */
+ uint32_t is_missing : 1;
+
+ /** 1 if this stream is located in a packed resource which may contain
+ * other streams (all compressed together) as well. */
+ uint32_t packed : 1;
+
+ uint32_t reserved_flags : 26;
+
+ /** If @p packed is 1, then this will specify the offset of the packed
+ * resource in the WIM. */
+ uint64_t raw_resource_offset_in_wim;
+
+ /** If @p is_packed_streams is 1, then this will specify the compressed
+ * size of the packed resource in the WIM. */
+ uint64_t raw_resource_compressed_size;
+
+ uint64_t reserved[2];
};
/** A stream of a file in the WIM. */
#define WIMLIB_REPARSE_TAG_DFS 0x8000000A
#define WIMLIB_REPARSE_TAG_DFSR 0x80000012
#define WIMLIB_REPARSE_TAG_FILTER_MANAGER 0x8000000B
+#define WIMLIB_REPARSE_TAG_WOF 0x80000017
#define WIMLIB_REPARSE_TAG_SYMLINK 0xA000000C
/** If the file is a reparse point (FILE_ATTRIBUTE_DIRECTORY set in the
* attributes), this will give the reparse tag. This tells you whether
* itself; only its children (in the case of a non-empty directory) */
#define WIMLIB_ITERATE_DIR_TREE_FLAG_CHILDREN 0x00000002
+/** Return ::WIMLIB_ERR_RESOURCE_NOT_FOUND if any resources needed to fill in
+ * the ::wimlib_resource_entry's for the iteration cannot be found in the lookup
+ * table of the ::WIMStruct. The default behavior without this flag is to fill
+ * in the SHA1 message digest of the ::wimlib_resource_entry and set the @ref
+ * wimlib_resource_entry::is_missing "is_missing" flag. */
+#define WIMLIB_ITERATE_DIR_TREE_FLAG_RESOURCES_NEEDED 0x00000004
-/*****************************
- * WIMLIB_ADD_FLAG_*
- *****************************/
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Directly capture a NTFS volume rather than a generic directory. This flag
* cannot be combined with ::WIMLIB_ADD_FLAG_DEREFERENCE or
* ::WIMLIB_ADD_FLAG_UNIX_DATA. */
#define WIMLIB_ADD_FLAG_NTFS 0x00000001
-/** Follow symlinks; archive and dump the files they point to. Cannot be used
- * with ::WIMLIB_ADD_FLAG_NTFS. */
+/** Follow symlinks; archive and dump the files they point to. Currently only
+ * supported on UNIX-like systems. */
#define WIMLIB_ADD_FLAG_DEREFERENCE 0x00000002
/** Call the progress function with the message
- * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file is starting to
- * be scanned, or when a directory or file is being excluded from capture. */
+ * ::WIMLIB_PROGRESS_MSG_SCAN_DENTRY when each directory or file has been
+ * scanned. */
#define WIMLIB_ADD_FLAG_VERBOSE 0x00000004
-/** Mark the image being added as the bootable image of the WIM. */
+/** Mark the image being added as the bootable image of the WIM. Not valid for
+ * wimlib_update_image(). */
#define WIMLIB_ADD_FLAG_BOOT 0x00000008
/** Store the UNIX owner, group, and mode. This is done by adding a special
* alternate data stream to each regular file, symbolic link, and directory to
* contain this information. Please note that this flag is for convenience
- * only; Microsoft's @a imagex.exe will not understand this special information.
- * This flag cannot be combined with ::WIMLIB_ADD_FLAG_NTFS. */
+ * only; Microsoft's implementation will not understand this special
+ * information. */
#define WIMLIB_ADD_FLAG_UNIX_DATA 0x00000010
/** Do not capture security descriptors. Only has an effect in NTFS capture
- * mode, or in Win32 native builds. */
+ * mode, or in Windows native builds. */
#define WIMLIB_ADD_FLAG_NO_ACLS 0x00000020
/** Fail immediately if the full security descriptor of any file or directory
- * cannot be accessed. Only has an effect in Win32 native builds. The default
- * behavior without this flag is to first try omitting the SACL from the
+ * cannot be accessed. Only has an effect in Windows native builds. The
+ * default behavior without this flag is to first try omitting the SACL from the
* security descriptor, then to try omitting the security descriptor entirely.
* */
#define WIMLIB_ADD_FLAG_STRICT_ACLS 0x00000040
#define WIMLIB_ADD_FLAG_NORPFIX 0x00000200
/** Do not automatically exclude unsupported files or directories from capture;
- * e.g. encrypted directories in NTFS-3g capture mode, or device files and FIFOs
- * on UNIX-like systems. Instead, fail with ::WIMLIB_ERR_UNSUPPORTED_FILE when
+ * e.g. encrypted files in NTFS-3g capture mode, or device files and FIFOs on
+ * UNIX-like systems. Instead, fail with ::WIMLIB_ERR_UNSUPPORTED_FILE when
* such a file is encountered. */
#define WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE 0x00000400
-/** Automatically select a capture configuration appropriate for capturing
- * filesystems containing Windows operating systems. When this flag is
- * specified, the corresponding @p config parameter or member must be @c NULL.
- *
- * Currently, selecting this capture configuration will cause the following
- * files and directories to be excluded from capture:
+/**
+ * Automatically select a capture configuration appropriate for capturing
+ * filesystems containing Windows operating systems. For example,
+ * "pagefile.sys" and "System Volume Information" will be excluded.
*
- * - "\$ntfs.log"
- * - "\hiberfil.sys"
- * - "\pagefile.sys"
- * - "\System Volume Information"
- * - "\RECYCLER"
- * - "\Windows\CSC"
+ * When this flag is specified, the corresponding @p config parameter or member
+ * must be @c NULL.
*
* Note that the default behavior--- that is, when this flag is not specified
* and @p config is @c NULL--- is to use no capture configuration, meaning that
*/
#define WIMLIB_ADD_FLAG_WINCONFIG 0x00000800
+/**
+ * Capture image as WIMBoot compatible. In addition, if no capture
+ * configuration file is explicitly specified use the capture configuration file
+ * <c>$SOURCE/Windows/System32/WimBootCompress.ini</c> if it exists, where
+ * <c>$SOURCE</c> is the directory being captured; or, if a capture
+ * configuration file is explicitly specified, use it and also place it at
+ * /Windows/System32/WimBootCompress.ini in the WIM image.
+ *
+ * Note: this will not by itself change the compression type. Before writing
+ * the WIM file, it's recommended to also do:
+ *
+ * \code
+ * wimlib_set_output_compression_type(wim, WIMLIB_COMPRESSION_TYPE_XPRESS);
+ * wimlib_set_output_chunk_size(wim, 4096);
+ * \endcode
+ *
+ * since that makes access to the data faster (at the cost of a worse
+ * compression ratio compared to the 32768-byte LZX chunks usually used).
+ */
+#define WIMLIB_ADD_FLAG_WIMBOOT 0x00001000
+
+/**
+ * If the add command involves adding a non-directory file to a location at
+ * which there already exists a nondirectory file in the WIM image, issue
+ * ::WIMLIB_ERR_INVALID_OVERLAY instead of replacing the file. This only has an
+ * effect when updating an existing image with wimlib_update_image().
+ * This was the default behavior in wimlib v1.6.2 and earlier.
+ */
+#define WIMLIB_ADD_FLAG_NO_REPLACE 0x00002000
+
#define WIMLIB_ADD_IMAGE_FLAG_NTFS WIMLIB_ADD_FLAG_NTFS
#define WIMLIB_ADD_IMAGE_FLAG_DEREFERENCE WIMLIB_ADD_FLAG_DEREFERENCE
#define WIMLIB_ADD_IMAGE_FLAG_VERBOSE WIMLIB_ADD_FLAG_VERBOSE
#define WIMLIB_ADD_IMAGE_FLAG_NO_UNSUPPORTED_EXCLUDE \
WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE
#define WIMLIB_ADD_IMAGE_FLAG_WINCONFIG WIMLIB_ADD_FLAG_WINCONFIG
+#define WIMLIB_ADD_IMAGE_FLAG_WIMBOOT WIMLIB_ADD_FLAG_WIMBOOT
+
-/******************************
- * WIMLIB_DELETE_FLAG_*
- ******************************/
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Do not issue an error if the path to delete does not exist. */
#define WIMLIB_DELETE_FLAG_FORCE 0x00000001
* issued if the path to delete is a directory. */
#define WIMLIB_DELETE_FLAG_RECURSIVE 0x00000002
-/******************************
- * WIMLIB_EXPORT_FLAG_*
- ******************************/
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
-/** See documentation for wimlib_export_image(). */
+/**
+ * If a single image is being exported, mark it bootable in the destination WIM.
+ * Alternatively, if ::WIMLIB_ALL_IMAGES is specified as the image to export,
+ * the image in the source WIM (if any) that is marked as bootable is also
+ * marked as bootable in the destination WIM.
+ */
#define WIMLIB_EXPORT_FLAG_BOOT 0x00000001
-/******************************
- * WIMLIB_EXTRACT_FLAG_*
- ******************************/
+/** Give the exported image(s) no names. Avoids problems with image name
+ * collisions.
+ */
+#define WIMLIB_EXPORT_FLAG_NO_NAMES 0x00000002
+
+/** Give the exported image(s) no descriptions. */
+#define WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS 0x00000004
+
+/** @} */
+/** @ingroup G_extracting_wims
+ * @{ */
/** Extract the image directly to a NTFS volume rather than a generic directory.
* This mode is only available if wimlib was compiled with libntfs-3g support;
#define WIMLIB_EXTRACT_FLAG_NTFS 0x00000001
/** When identical files are extracted from the WIM, always hard link them
- * together. */
+ * together. This flag cannot be combined with ::WIMLIB_EXTRACT_FLAG_SYMLINK.
+ */
#define WIMLIB_EXTRACT_FLAG_HARDLINK 0x00000002
/** When identical files are extracted from the WIM, always symlink them
- * together. */
+ * together. This flag cannot be combined with ::WIMLIB_EXTRACT_FLAG_HARDLINK.
+ */
#define WIMLIB_EXTRACT_FLAG_SYMLINK 0x00000004
/** This flag no longer does anything but is reserved for future use. */
#define WIMLIB_EXTRACT_FLAG_VERBOSE 0x00000008
-/** Read the WIM file sequentially while extracting the image. */
+/** Read the WIM file sequentially while extracting the image. As of wimlib
+ * v1.6.0 this is the default behavior, and this flag no longer does anything.
+ */
#define WIMLIB_EXTRACT_FLAG_SEQUENTIAL 0x00000010
/** Extract special UNIX data captured with ::WIMLIB_ADD_FLAG_UNIX_DATA. Only
* specified. */
#define WIMLIB_EXTRACT_FLAG_UNIX_DATA 0x00000020
-/** Do not extract security descriptors. */
+/** Do not extract security descriptors. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS. */
#define WIMLIB_EXTRACT_FLAG_NO_ACLS 0x00000040
/** Fail immediately if the full security descriptor of any file or directory
* cannot be set exactly as specified in the WIM file. On Windows, the default
- * behavior without this flag is to fall back to setting the security descriptor
- * with the SACL omitted, then only the default inherited security descriptor,
- * if we do not have permission to set the desired one. */
+ * behavior without this flag when wimlib does not have permission to set the
+ * correct security descriptor is to fall back to setting the security
+ * descriptor with the SACL omitted, then with the DACL omitted, then with the
+ * owner omitted, then not at all. This flag cannot be combined with
+ * ::WIMLIB_EXTRACT_FLAG_NO_ACLS. */
#define WIMLIB_EXTRACT_FLAG_STRICT_ACLS 0x00000080
/** This is the extraction equivalent to ::WIMLIB_ADD_FLAG_RPFIX. This forces
* reparse-point fixups on, so absolute symbolic links or junction points will
- * be fixed to be absolute relative to the actual extraction root. Reparse
- * point fixups are done by default if WIM_HDR_FLAG_RP_FIX is set in the WIM
- * header. This flag may only be specified when extracting a full image (not a
- * file or directory tree within one). */
+ * be fixed to be absolute relative to the actual extraction root. Reparse-
+ * point fixups are done by default for wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe() if WIM_HDR_FLAG_RP_FIX is set in the WIM
+ * header. This flag cannot be combined with ::WIMLIB_EXTRACT_FLAG_NORPFIX. */
#define WIMLIB_EXTRACT_FLAG_RPFIX 0x00000100
/** Force reparse-point fixups on extraction off, regardless of the state of the
- * WIM_HDR_FLAG_RP_FIX flag in the WIM header. */
+ * WIM_HDR_FLAG_RP_FIX flag in the WIM header. This flag cannot be combined
+ * with ::WIMLIB_EXTRACT_FLAG_RPFIX. */
#define WIMLIB_EXTRACT_FLAG_NORPFIX 0x00000200
-/** Extract the specified file to standard output. This is only valid in an
- * extraction command that specifies the extraction of a regular file in the WIM
- * image. */
+/** Extract the paths, each of which must name a regular file, to standard
+ * output. Not valid for wimlib_extract_image() and
+ * wimlib_extract_image_from_pipe(). */
#define WIMLIB_EXTRACT_FLAG_TO_STDOUT 0x00000400
/** Instead of ignoring files and directories with names that cannot be
* behavior is currently less than satisfactory. Do not use (yet). */
#define WIMLIB_EXTRACT_FLAG_RESUME 0x00010000
-/******************************
- * WIMLIB_MOUNT_FLAG_*
- ******************************/
+/** Perform the extraction ordered by the tree of files to extract rather than
+ * how the underlying streams are arranged in the WIM file. For regular WIM
+ * files this may decrease or increase performance, depending on various
+ * factors. For WIM files containing packed streams this will decrease
+ * performance. */
+#define WIMLIB_EXTRACT_FLAG_FILE_ORDER 0x00020000
+
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Treat the
+ * paths to extract as wildcard patterns ("globs") which may contain the
+ * wildcard characters @c ? and @c *. The @c ? character matches any
+ * non-path-separator character, whereas the @c * character matches zero or more
+ * non-path-separator characters. Consequently, each glob may match zero or
+ * more actual paths in the WIM image. By default, if a glob does not match any
+ * files, a warning but not an error will be issued, even if the glob did not
+ * actually contain wildcard characters. Use ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB
+ * to get an error instead. */
+#define WIMLIB_EXTRACT_FLAG_GLOB_PATHS 0x00040000
+
+/** In combination with ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS, causes an error
+ * (::WIMLIB_ERR_PATH_DOES_NOT_EXIST) rather than a warning to be issued when
+ * one of the provided globs did not match a file. */
+#define WIMLIB_EXTRACT_FLAG_STRICT_GLOB 0x00080000
+
+/** Do not extract Windows file attributes such as readonly, hidden, etc. */
+#define WIMLIB_EXTRACT_FLAG_NO_ATTRIBUTES 0x00100000
+
+/** For wimlib_extract_paths() and wimlib_extract_pathlist() only: Do not
+ * preserve the directory structure of the archive when extracting --- that is,
+ * place each extracted file or directory tree directly in the target directory.
+ */
+#define WIMLIB_EXTRACT_FLAG_NO_PRESERVE_DIR_STRUCTURE 0x00200000
+
+/** Windows only: Extract files as "pointers" back to the WIM archive. See the
+ * documentation for the <b>--wimboot</b> option of <b>wimlib-imagex apply</b>
+ * for more information. */
+#define WIMLIB_EXTRACT_FLAG_WIMBOOT 0x00400000
+
+/** @} */
+/** @ingroup G_mounting_wim_images
+ * @{ */
/** Mount the WIM image read-write rather than the default of read-only. */
#define WIMLIB_MOUNT_FLAG_READWRITE 0x00000001
* allow_other option to FUSE mount) */
#define WIMLIB_MOUNT_FLAG_ALLOW_OTHER 0x00000040
-/******************************
- * WIMLIB_OPEN_FLAG_*
- ******************************/
+/** @} */
+/** @ingroup G_creating_and_opening_wims
+ * @{ */
/** Verify the WIM contents against the WIM's integrity table, if present. This
* causes the raw data of the WIM file, divided into 10 MB chunks, to be
* integrity table is invalid). */
#define WIMLIB_OPEN_FLAG_CHECK_INTEGRITY 0x00000001
-/** Do not issue an error if the WIM is part of a split WIM. Programs must
- * specify this flag if they intend to open part of a split WIM, rather than
- * only supporting standalone WIMs. */
-#define WIMLIB_OPEN_FLAG_SPLIT_OK 0x00000002
+/** Issue an error if the WIM is part of a split WIM. Software can provide
+ * this flag for convenience if it explicitly does not want to support split
+ * WIMs. */
+#define WIMLIB_OPEN_FLAG_ERROR_IF_SPLIT 0x00000002
/** Check if the WIM is writable and return ::WIMLIB_ERR_WIM_IS_READONLY if it
* is not. A WIM is considered writable only if it is writable at the
* an error sooner rather than later. */
#define WIMLIB_OPEN_FLAG_WRITE_ACCESS 0x00000004
-/******************************
- * WIMLIB_UNMOUNT_FLAG_*
- ******************************/
+/** @} */
+/** @ingroup G_mounting_wim_images
+ * @{ */
/** See ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY. */
#define WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY 0x00000001
/** Do a "lazy" unmount (detach filesystem immediately, even if busy). */
#define WIMLIB_UNMOUNT_FLAG_LAZY 0x00000010
-/******************************
- * WIMLIB_UPDATE_FLAG_*
- ******************************/
+/** In combination with ::WIMLIB_UNMOUNT_FLAG_COMMIT for a read-write mounted
+ * image, causes the modified image to be committed as a new, unnamed image
+ * appended to the archive. The original image will be unmodified. */
+#define WIMLIB_UNMOUNT_FLAG_NEW_IMAGE 0x00000020
+
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
/** Send ::WIMLIB_PROGRESS_MSG_UPDATE_BEGIN_COMMAND and
* ::WIMLIB_PROGRESS_MSG_UPDATE_END_COMMAND messages. */
#define WIMLIB_UPDATE_FLAG_SEND_PROGRESS 0x00000001
-/******************************
- * WIMLIB_WRITE_FLAG_*
- ******************************/
+/** @} */
+/** @ingroup G_writing_and_overwriting_wims
+ * @{ */
/** Include an integrity table in the WIM.
*
* set the readonly flag on the on-disk WIM file. */
#define WIMLIB_WRITE_FLAG_IGNORE_READONLY_FLAG 0x00000100
-/******************************
- * WIMLIB_INIT_FLAG_*
- ******************************/
+/** Do not include non-metadata resources already present in other WIMs. This
+ * flag can be used to write a "delta" WIM after resources from the WIM on which
+ * the delta is to be based were referenced with
+ * wimlib_reference_resource_files() or wimlib_reference_resources(). */
+#define WIMLIB_WRITE_FLAG_SKIP_EXTERNAL_WIMS 0x00000200
+
+/** Asserts that for writes of all WIM images, all streams needed for the WIM
+ * are already present (not in external resource WIMs) and their reference
+ * counts are correct, so the code does not need to recalculate which streams
+ * are referenced. This is for optimization purposes only, since with this flag
+ * specified, the metadata resources may not need to be decompressed and parsed.
+ *
+ * This flag can be passed to wimlib_write() and wimlib_write_to_fd(), but is
+ * already implied for wimlib_overwrite(). */
+#define WIMLIB_WRITE_FLAG_STREAMS_OK 0x00000400
+
+#define WIMLIB_WRITE_FLAG_RESERVED 0x00000800
+
+/**
+ * When writing streams in the resulting WIM file, pack multiple streams into a
+ * single WIM resource instead of compressing them independently. This tends to
+ * produce a better compression ratio at the cost of less random access.
+ * However, WIMs created with this flag are only compatible with wimlib v1.6.0
+ * or later and WIMGAPI Windows 8 or later, seemingly for Windows Setup only and
+ * <b>not including ImageX and Dism</b>. WIMs created with this flag must use
+ * version number 3584 in their header instead of 68864.
+ *
+ * If this flag is passed to wimlib_overwrite() and the WIM did not previously
+ * contain packed streams, the WIM's version number will be changed to 3584 and
+ * the new streams will be written packed. Use ::WIMLIB_WRITE_FLAG_REBUILD to
+ * force the WIM to be fully rebuilt. */
+#define WIMLIB_WRITE_FLAG_PACK_STREAMS 0x00001000
+
+/** @} */
+/** @ingroup G_general
+ * @{ */
/** Assume that strings are represented in UTF-8, even if this is not the
* locale's character encoding. This flag is ignored on Windows, where wimlib
*/
#define WIMLIB_INIT_FLAG_STRICT_APPLY_PRIVILEGES 0x00000008
-/** Specification of an update to perform on a WIM image. */
-struct wimlib_update_command {
+/** Default to interpreting WIM paths case sensitively (default on UNIX-like
+ * systems). */
+#define WIMLIB_INIT_FLAG_DEFAULT_CASE_SENSITIVE 0x00000010
+
+/** Default to interpreting WIM paths case insensitively (default on Windows).
+ * This does not apply to mounted images. */
+#define WIMLIB_INIT_FLAG_DEFAULT_CASE_INSENSITIVE 0x00000020
+
+/** @} */
+/** @ingroup G_nonstandalone_wims
+ * @{ */
+
+/** For wimlib_reference_resource_files(), enable shell-style filename globbing.
+ * Ignored by wimlib_reference_resources(). */
+#define WIMLIB_REF_FLAG_GLOB_ENABLE 0x00000001
+
+/** For wimlib_reference_resource_files(), issue an error
+ * (::WIMLIB_ERR_GLOB_HAD_NO_MATCHES) if a glob did not match any files. The
+ * default behavior without this flag is to issue no error at that point, but
+ * then attempt to open the glob as a literal path, which of course will fail
+ * anyway if no file exists at that path. No effect if
+ * ::WIMLIB_REF_FLAG_GLOB_ENABLE is not also specified. Ignored by
+ * wimlib_reference_resources(). */
+#define WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH 0x00000002
+
+/** @} */
+/** @ingroup G_modifying_wims
+ * @{ */
+
+/** The specific type of update to perform. */
+enum wimlib_update_op {
+ /** Add a new file or directory tree to the WIM image in a
+ * certain location. */
+ WIMLIB_UPDATE_OP_ADD = 0,
+
+ /** Delete a file or directory tree from the WIM image. */
+ WIMLIB_UPDATE_OP_DELETE,
+
+ /** Rename a file or directory tree in the WIM image. */
+ WIMLIB_UPDATE_OP_RENAME,
+};
+
+/** Data for a ::WIMLIB_UPDATE_OP_ADD operation. */
+struct wimlib_add_command {
+ /** Filesystem path to the file or directory tree to add. */
+ wimlib_tchar *fs_source_path;
- /** The specific type of update to perform. */
- enum wimlib_update_op {
- /** Add a new file or directory tree to the WIM image in a
- * certain location. */
- WIMLIB_UPDATE_OP_ADD = 0,
+ /** Destination path in the WIM image. Use ::WIMLIB_WIM_ROOT_PATH to
+ * specify the root directory of the WIM image. */
+ wimlib_tchar *wim_target_path;
- /** Delete a file or directory tree from the WIM image. */
- WIMLIB_UPDATE_OP_DELETE,
+ /** Path to capture configuration file to use, or @c NULL for default.
+ */
+ wimlib_tchar *config_file;
- /** Rename a file or directory tree in the WIM image. */
- WIMLIB_UPDATE_OP_RENAME,
- } op;
- union {
- /** Data for a ::WIMLIB_UPDATE_OP_ADD operation. */
- struct wimlib_add_command {
- /** Filesystem path to the file or directory tree to
- * add. */
- wimlib_tchar *fs_source_path;
- /** Path, specified from the root of the WIM image, at
- * which to add the file or directory tree within the
- * WIM image. */
- wimlib_tchar *wim_target_path;
-
- /** Configuration for excluded files. @c NULL means
- * exclude no files (use no configuration), unless
- * ::WIMLIB_ADD_FLAG_WINCONFIG is specified in @p
- * add_flags. */
- struct wimlib_capture_config *config;
-
- /** Bitwise OR of WIMLIB_ADD_FLAG_* flags. */
- int add_flags;
- } add;
- /** Data for a ::WIMLIB_UPDATE_OP_DELETE operation. */
- struct wimlib_delete_command {
- /** Path, specified from the root of the WIM image, for
- * the file or directory tree within the WIM image to be
- * deleted. */
- wimlib_tchar *wim_path;
- /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
- int delete_flags;
- } delete;
- /** Data for a ::WIMLIB_UPDATE_OP_RENAME operation. */
- struct wimlib_rename_command {
- /** Path, specified from the root of the WIM image, for
- * the source file or directory tree within the WIM
- * image. */
- wimlib_tchar *wim_source_path;
- /** Path, specified from the root of the WIM image, for
- * the destination file or directory tree within the WIM
- * image. */
- wimlib_tchar *wim_target_path;
- /** Reserved; set to 0. */
- int rename_flags;
- } rename;
- };
+ /** Bitwise OR of WIMLIB_ADD_FLAG_* flags. */
+ int add_flags;
+};
+
+/** Data for a ::WIMLIB_UPDATE_OP_DELETE operation. */
+struct wimlib_delete_command {
+
+ /** Path, specified from the root of the WIM image, for the file or
+ * directory tree within the WIM image to be deleted. */
+ wimlib_tchar *wim_path;
+
+ /** Bitwise OR of WIMLIB_DELETE_FLAG_* flags. */
+ int delete_flags;
};
-/** Specification of a file or directory tree to extract from a WIM image. */
-struct wimlib_extract_command {
- /** Path to file or directory tree within the WIM image to extract. It
- * must be provided as an absolute path from the root of the WIM image.
- * The path separators may be either forward slashes or backslashes. */
+/** Data for a ::WIMLIB_UPDATE_OP_RENAME operation. */
+struct wimlib_rename_command {
+
+ /** Path, specified from the root of the WIM image, for the source file
+ * or directory tree within the WIM image. */
wimlib_tchar *wim_source_path;
- /** Filesystem path to extract the file or directory tree to. */
- wimlib_tchar *fs_dest_path;
+ /** Path, specified from the root of the WIM image, for the destination
+ * file or directory tree within the WIM image. */
+ wimlib_tchar *wim_target_path;
+
+ /** Reserved; set to 0. */
+ int rename_flags;
+};
+
+/** Specification of an update to perform on a WIM image. */
+struct wimlib_update_command {
+
+ enum wimlib_update_op op;
- /** Bitwise or of zero or more of the WIMLIB_EXTRACT_FLAG_* flags. */
- int extract_flags;
+ union {
+ struct wimlib_add_command add;
+ struct wimlib_delete_command delete_; /* Underscore is for C++
+ compatibility. */
+ struct wimlib_rename_command rename;
+ };
};
+/** @} */
+/** @ingroup G_general
+ * @{ */
+
/**
* Possible values of the error code returned by many functions in wimlib.
*
WIMLIB_ERR_FORK,
WIMLIB_ERR_FUSE,
WIMLIB_ERR_FUSERMOUNT,
+ WIMLIB_ERR_GLOB_HAD_NO_MATCHES,
WIMLIB_ERR_ICONV_NOT_AVAILABLE,
WIMLIB_ERR_IMAGE_COUNT,
WIMLIB_ERR_IMAGE_NAME_COLLISION,
WIMLIB_ERR_INVALID_PIPABLE_WIM,
WIMLIB_ERR_INVALID_REPARSE_DATA,
WIMLIB_ERR_INVALID_RESOURCE_HASH,
- WIMLIB_ERR_INVALID_SECURITY_DATA,
WIMLIB_ERR_INVALID_UNMOUNT_MESSAGE,
WIMLIB_ERR_INVALID_UTF16_STRING,
WIMLIB_ERR_INVALID_UTF8_STRING,
WIMLIB_ERR_IS_DIRECTORY,
+ WIMLIB_ERR_IS_SPLIT_WIM,
WIMLIB_ERR_LIBXML_UTF16_HANDLER_NOT_AVAILABLE,
WIMLIB_ERR_LINK,
+ WIMLIB_ERR_METADATA_NOT_FOUND,
WIMLIB_ERR_MKDIR,
WIMLIB_ERR_MQUEUE,
WIMLIB_ERR_NOMEM,
WIMLIB_ERR_SET_SHORT_NAME,
WIMLIB_ERR_SET_TIMESTAMPS,
WIMLIB_ERR_SPLIT_INVALID,
- WIMLIB_ERR_SPLIT_UNSUPPORTED,
WIMLIB_ERR_STAT,
WIMLIB_ERR_TIMEOUT,
WIMLIB_ERR_UNEXPECTED_END_OF_FILE,
WIMLIB_ERR_WIM_IS_READONLY,
WIMLIB_ERR_WRITE,
WIMLIB_ERR_XML,
+ WIMLIB_ERR_WIM_IS_ENCRYPTED,
+ WIMLIB_ERR_WIMBOOT,
};
/** Used to specify all images in the WIM. */
#define WIMLIB_ALL_IMAGES (-1)
+/** @} */
+
/**
+ * @ingroup G_modifying_wims
+ *
* Appends an empty image to a WIM file. This empty image will initially
* contain no files or directories, although if written without further
* modifications, a root directory will be created automatically for it. After
int *new_idx_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Adds an image to a WIM file from an on-disk directory tree or NTFS volume.
*
* The directory tree or NTFS volume is scanned immediately to load the dentry
* Name to give the new image. If @c NULL or empty, the new image is given
* no name. If nonempty, it must specify a name that does not already
* exist in @p wim.
- * @param config
- * Capture configuration that specifies files, directories, or path globs
- * to exclude from being captured. If @c NULL, a dummy configuration where
- * no paths are treated specially is used.
+ * @param config_file
+ * Path to capture configuration file, or @c NULL. This file may specify,
+ * among other things, which files to exclude from capture. See the man
+ * page for <b>wimlib-imagex capture</b> (<b>--config</b> option) for
+ * details of the file format. If @c NULL, the default capture
+ * configuration shall be used. Ordinarily, the default capture
+ * configuration will result in no files being excluded from capture purely
+ * based on name; however, the ::WIMLIB_ADD_FLAG_WINCONFIG and
+ * ::WIMLIB_ADD_FLAG_WIMBOOT flags modify the default.
* @param add_flags
* Bitwise OR of flags prefixed with WIMLIB_ADD_FLAG.
* @param progress_func
wimlib_add_image(WIMStruct *wim,
const wimlib_tchar *source,
const wimlib_tchar *name,
- const struct wimlib_capture_config *config,
+ const wimlib_tchar *config_file,
int add_flags,
wimlib_progress_func_t progress_func);
-/** This function is equivalent to wimlib_add_image() except it allows for
+/**
+ * @ingroup G_modifying_wims
+ *
+ * This function is equivalent to wimlib_add_image() except it allows for
* multiple sources to be combined into a single WIM image. This is done by
* specifying the @p sources and @p num_sources parameters instead of the @p
* source parameter of wimlib_add_image(). The rest of the parameters are the
const struct wimlib_capture_source *sources,
size_t num_sources,
const wimlib_tchar *name,
- const struct wimlib_capture_config *config,
+ const wimlib_tchar *config_file,
int add_flags,
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Creates a ::WIMStruct for a new WIM file.
*
* This only creates an in-memory structure for a WIM that initially contains no
* images. No on-disk file is created until wimlib_write() is called.
*
* @param ctype
- * The type of compression to be used in the new WIM file. Must be
- * ::WIMLIB_COMPRESSION_TYPE_NONE, ::WIMLIB_COMPRESSION_TYPE_LZX, or
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS.
+ * The type of compression to be used in the new WIM file, as one of the
+ * ::wimlib_compression_type constants.
* @param wim_ret
* On success, a pointer to an opaque ::WIMStruct for the new WIM file is
* written to the memory location pointed to by this paramater. The
* it.
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
- * @p ctype was not ::WIMLIB_COMPRESSION_TYPE_NONE,
- * ::WIMLIB_COMPRESSION_TYPE_LZX, or ::WIMLIB_COMPRESSION_TYPE_XPRESS.
+ * @p ctype was not a supported compression type.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocate needed memory.
*/
wimlib_create_new_wim(int ctype, WIMStruct **wim_ret);
/**
+ * @ingroup G_modifying_wims
+ *
* Deletes an image, or all images, from a WIM file.
*
* All streams referenced by the image(s) being deleted are removed from the
* flag.
*
* This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
- * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_NOMEM,
- * ::WIMLIB_ERR_READ, or ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which
- * indicate failure (for different reasons) to read the metadata resource for an
- * image that needed to be deleted.
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for an image that needed to
+ * be deleted.
*/
extern int
wimlib_delete_image(WIMStruct *wim, int image);
/**
+ * @ingroup G_modifying_wims
+ *
* Exports an image, or all the images, from a WIM file, into another WIM file.
*
* The destination image is made to share the same dentry tree and security data
* dest_wim (if any) until wimlib_write() or wimlib_overwrite() is called.
*
* @param src_wim
- * Pointer to the ::WIMStruct for a stand-alone WIM or part 1 of a split
- * WIM that contains the image(s) being exported.
+ * The WIM from which to export the images, specified as a pointer to the
+ * ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1 of a
+ * split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
* @param src_image
- * The image to export from @p src_wim. Can be the number of an image, or
- * ::WIMLIB_ALL_IMAGES to export all images.
+ * The image to export from @p src_wim, as either a 1-based image index to
+ * export a single image, or ::WIMLIB_ALL_IMAGES to export all images.
* @param dest_wim
- * Pointer to the ::WIMStruct for a WIM file that will receive the images
- * being exported.
+ * Pointer to the ::WIMStruct for a WIM that will receive the images being
+ * exported.
* @param dest_name
- * The name to give the exported image in the new WIM file. If left @c
- * NULL, the name from @p src_wim is used. This parameter must be left @c
- * NULL if @p src_image is ::WIMLIB_ALL_IMAGES and @p src_wim contains more
- * than one image; in that case, the names are all taken from the @p
- * src_wim. (This is allowed even if one or more images being exported has
- * no name.)
+ * For single-image exports, the name to give the exported image in @p
+ * dest_wim. If left @c NULL, the name from @p src_wim is used. For
+ * ::WIMLIB_ALL_IMAGES exports, this parameter must be left @c NULL; in
+ * that case, the names are all taken from @p src_wim. This parameter is
+ * overridden by ::WIMLIB_EXPORT_FLAG_NO_NAMES.
* @param dest_description
- * The description to give the exported image in the new WIM file. If left
- * @c NULL, the description from the @p src_wim is used. This parameter must
- * be left @c NULL if @p src_image is ::WIMLIB_ALL_IMAGES and @p src_wim contains
- * more than one image; in that case, the descriptions are all taken from
- * @p src_wim. (This is allowed even if one or more images being exported
- * has no description.)
+ * For single-image exports, the description to give the exported image in
+ * the new WIM file. If left @c NULL, the description from @p src_wim is
+ * used. For ::WIMLIB_ALL_IMAGES exports, this parameter must be left @c
+ * NULL; in that case, the description are all taken from @p src_wim. This
+ * parameter is overridden by ::WIMLIB_EXPORT_FLAG_NO_DESCRIPTIONS.
* @param export_flags
- * ::WIMLIB_EXPORT_FLAG_BOOT if the image being exported is to be made
- * bootable, or 0 if which image is marked as bootable in the destination
- * WIM is to be left unchanged. If @p src_image is ::WIMLIB_ALL_IMAGES and
- * there are multiple images in @p src_wim, specifying
- * ::WIMLIB_EXPORT_FLAG_BOOT is valid only if one of the exported images is
- * currently marked as bootable in @p src_wim; if that is the case, then
- * that image is marked as bootable in the destination WIM.
- * @param additional_swms
- * Array of pointers to the ::WIMStruct for each additional part in the
- * split WIM. Ignored if @p num_additional_swms is 0. The pointers do not
- * need to be in any particular order, but they must include all parts of
- * the split WIM other than the first part, which must be provided in the
- * @p wim parameter.
- * @param num_additional_swms
- * Number of additional WIM parts provided in the @p additional_swms array.
- * This number should be one less than the total number of parts in the
- * split WIM. Set to 0 if the WIM is a standalone WIM.
+ * Bitwise OR of flags prefixed with WIMLIB_EXPORT_FLAG.
* @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
+ * Currently ignored, but reserved for a function that will be called with
+ * information about the operation. Use NULL if no additional information
+ * is desired.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
* One or more of the names being given to an exported image was already in
* use in the destination WIM.
* @retval ::WIMLIB_ERR_INVALID_IMAGE
- * @p src_image does not exist in @p src_wim.
+ * @p src_image does not exist in @p src_wim and was not
+ * ::WIMLIB_ALL_IMAGES.
* @retval ::WIMLIB_ERR_INVALID_PARAM
- * ::WIMLIB_EXPORT_FLAG_BOOT was specified in @p flags, @p src_image was
- * ::WIMLIB_ALL_IMAGES, @p src_wim contains multiple images, and no images in
- * @p src_wim are marked as bootable; or @p dest_name and/or @p
- * dest_description were non-<code>NULL</code>, @p src_image was
- * ::WIMLIB_ALL_IMAGES, and @p src_wim contains multiple images.
+ * @p src_wim and/or @p dest_wim were @c NULL; or @p src_image was
+ * ::WIMLIB_ALL_IMAGES but @p dest_name and/or @p dest_description were not
+ * @c NULL.
+ * @retval ::WIMLIB_ERR_METADATA_NOT_FOUND
+ * Either @p src_wim or @p dest_wim did not contain metadata resources; for
+ * example, one of them was a non-first part of a split WIM.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocate needed memory.
- * @retval ::WIMLIB_ERR_SPLIT_INVALID
- * The source WIM is a split WIM, but the parts specified do not form a
- * complete split WIM because they do not include all the parts of the
- * split WIM, there are duplicate parts, or not all the parts are in fact
- * from the same split WIM.
+ * @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
+ * A resource that needed to be exported could not be found in either the
+ * source or destination WIMs. This error can occur if, for example, @p
+ * src_wim is part of a split WIM but needed resources from the other split
+ * WIM parts were not referenced with wimlib_reference_resources() or
+ * wimlib_reference_resource_files() before the call to
+ * wimlib_export_image().
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
* @p dest_wim is considered read-only because of any of the reasons
* mentioned in the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS
* flag.
*
* This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
- * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_NOMEM,
- * ::WIMLIB_ERR_READ, or ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which
- * indicate failure (for different reasons) to read the metadata resource for an
- * image in @p src_wim that needed to be exported.
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for an image in @p src_wim
+ * that needed to be exported.
*/
extern int
wimlib_export_image(WIMStruct *src_wim, int src_image,
const wimlib_tchar *dest_name,
const wimlib_tchar *dest_description,
int export_flags,
- WIMStruct **additional_swms,
- unsigned num_additional_swms,
wimlib_progress_func_t progress_func);
+
/**
- * Extract zero or more files or directory trees from a WIM image.
+ * @ingroup G_extracting_wims
*
- * This generalizes the single-image extraction functionality of
- * wimlib_extract_image() to allow extracting only the specified subsets of the
+ * Extracts an image, or all images, from a WIM to a directory or NTFS volume
* image.
*
- * @param wim
- * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
- * split WIM.
- *
- * @param image
- * The 1-based number of the image in @p wim from which the files or
- * directory trees are to be extracted. It cannot be ::WIMLIB_ALL_IMAGES.
- *
- * @param cmds
- * An array of ::wimlib_extract_command structures that specifies the
- * extractions to perform.
- *
- * @param num_cmds
- * Number of commands in the @p cmds array.
- *
- * @param default_extract_flags
- * Default extraction flags; the behavior shall be as if these flags had
- * been specified in the ::wimlib_extract_command.extract_flags member in
- * each extraction command, in combination with any flags already present.
- *
- * @param additional_swms
- * Array of pointers to the ::WIMStruct for each additional part in the
- * split WIM. Ignored if @p num_additional_swms is 0. The pointers do not
- * need to be in any particular order, but they must include all parts of
- * the split WIM other than the first part, which must be provided in the
- * @p wim parameter.
- *
- * @param num_additional_swms
- * Number of additional WIM parts provided in the @p additional_swms array.
- * This number should be one less than the total number of parts in the
- * split WIM. Set to 0 if the WIM is a standalone WIM.
- *
- * @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
- *
- * @return 0 on success; nonzero on error. The possible error codes include
- * most of those documented as returned by wimlib_extract_image() as well as the
- * following additional error codes:
- *
- * @retval ::WIMLIB_ERR_INVALID_IMAGE
- * @p image was ::WIMLIB_ALL_IMAGES (or was not otherwise a valid image in
- * the WIM file).
- * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
- * The ::wimlib_extract_command.wim_source_path member in one of the
- * extract commands did not exist in the WIM.
- * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
- * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified for an extraction command
- * in which ::wimlib_extract_command.wim_source_path existed but was not a
- * regular file or directory.
- * @retval ::WIMLIB_ERR_INVALID_PARAM
- * ::WIMLIB_EXTRACT_FLAG_HARDLINK or ::WIMLIB_EXTRACT_FLAG_SYMLINK was
- * specified for some commands but not all; or
- * ::wimlib_extract_command.fs_dest_path was @c NULL or the empty string
- * for one or more commands; or ::WIMLIB_EXTRACT_FLAG_RPFIX was specified
- * for a command in which ::wimlib_extract_command.wim_source_path did not
- * specify the root directory of the WIM image.
- */
-extern int
-wimlib_extract_files(WIMStruct *wim,
- int image,
- const struct wimlib_extract_command *cmds,
- size_t num_cmds,
- int default_extract_flags,
- WIMStruct **additional_swms,
- unsigned num_additional_swms,
- wimlib_progress_func_t progress_func);
-
-/**
- * Extracts an image, or all images, from a standalone or split WIM file to a
- * directory or directly to a NTFS volume image.
- *
* The exact behavior of how wimlib extracts files from a WIM image is
* controllable by the @p extract_flags parameter, but there also are
* differences depending on the platform (UNIX-like vs Windows). See the manual
* special "NTFS volume extraction mode" entered by providing
* ::WIMLIB_EXTRACT_FLAG_NTFS.
*
- * All extracted data is SHA1-summed, and ::WIMLIB_ERR_INVALID_RESOURCE_HASH is
- * returned if any resulting SHA1 message digests do not match the values
- * provided in the WIM file. Therefore, if this function is successful, you can
- * be fairly sure that any compressed data in the WIM was uncompressed
- * correctly.
- *
* @param wim
- * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
- * split WIM.
+ * The WIM from which to extract the image(s), specified as a pointer to
+ * the ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1
+ * of a split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
* @param image
- * The image to extract. Can be the number of an image, or ::WIMLIB_ALL_IMAGES
- * to specify that all images are to be extracted. ::WIMLIB_ALL_IMAGES cannot
- * be used if ::WIMLIB_EXTRACT_FLAG_NTFS is specified in @p extract_flags.
+ * The image to extract, specified as either the 1-based index of a single
+ * image to extract, or ::WIMLIB_ALL_IMAGES to specify that all images are
+ * to be extracted. ::WIMLIB_ALL_IMAGES cannot be used if
+ * ::WIMLIB_EXTRACT_FLAG_NTFS is specified in @p extract_flags.
* @param target
- * Directory to extract the WIM image(s) to (created if it does not already
- * exist); or, with ::WIMLIB_EXTRACT_FLAG_NTFS in @p extract_flags, the
- * path to the unmounted NTFS volume to extract the image to.
+ * Directory to extract the WIM image(s) to; or, with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS specified in @p extract_flags, the path to
+ * the unmounted NTFS volume to which to extract the image.
* @param extract_flags
- * Bitwise OR of the flags prefixed with WIMLIB_EXTRACT_FLAG.
- * @param additional_swms
- * Array of pointers to the ::WIMStruct for each additional part in the
- * split WIM. Ignored if @p num_additional_swms is 0. The pointers do not
- * need to be in any particular order, but they must include all parts of
- * the split WIM other than the first part, which must be provided in the
- * @p wim parameter.
- * @param num_additional_swms
- * Number of additional WIM parts provided in the @p additional_swms array.
- * This number should be one less than the total number of parts in the
- * split WIM. Set to 0 if the WIM is a standalone WIM.
- *
+ * Bitwise OR of flags prefixed with WIMLIB_EXTRACT_FLAG.
* @param progress_func
- * If non-NULL, a function that will be called periodically with the
- * progress of the current operation.
+ * If non-NULL, a function that will be called periodically with the
+ * progress of the current operation. The main message to look for is
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS; however, there are others as
+ * well.
*
* @return 0 on success; nonzero on error.
* @retval ::WIMLIB_ERR_DECOMPRESSION
- * Failed to decompress a resource to be extracted, or failed to decompress
- * a needed metadata resource.
- * @retval ::WIMLIB_ERR_INVALID_PARAM
- * Both ::WIMLIB_EXTRACT_FLAG_HARDLINK and ::WIMLIB_EXTRACT_FLAG_SYMLINK
- * were specified in @p extract_flags; or both
- * ::WIMLIB_EXTRACT_FLAG_STRICT_ACLS and ::WIMLIB_EXTRACT_FLAG_NO_ACLS were
- * specified in @p extract_flags; or both ::WIMLIB_EXTRACT_FLAG_RPFIX and
- * ::WIMLIB_EXTRACT_FLAG_NORPFIX were specified in @p extract_flags; or
- * ::WIMLIB_EXTRACT_FLAG_RESUME was specified in @p extract_flags; or if
- * ::WIMLIB_EXTRACT_FLAG_NTFS was specified in @p extract_flags and
- * @p image was ::WIMLIB_ALL_IMAGES.
+ * Failed to decompress data contained in the WIM.
* @retval ::WIMLIB_ERR_INVALID_METADATA_RESOURCE
- * The metadata resource for an image being extracted was invalid.
+ * The metadata for one of the images to extract was invalid.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * The extraction flags were invalid; more details may be found in the
+ * documentation for the specific extraction flags that were specified. Or
+ * @p target was @c NULL or the empty string, or @p wim was @c NULL.
* @retval ::WIMLIB_ERR_INVALID_RESOURCE_HASH
- * The SHA1 message digest of an extracted stream did not match the SHA1
- * message digest given in the WIM file.
+ * The SHA1 message digest of an extracted stream did not match the SHA1
+ * message digest given in the WIM.
* @retval ::WIMLIB_ERR_LINK
- * Failed to create a symbolic link or a hard link.
+ * Failed to create a symbolic link or a hard link.
+ * @retval ::WIMLIB_ERR_METADATA_NOT_FOUND
+ * The metadata resource for one of the images to extract was not found.
+ * This can happen if @p wim represents a non-first part of a split WIM.
* @retval ::WIMLIB_ERR_MKDIR
- * Failed create a directory.
+ * Failed create a directory.
* @retval ::WIMLIB_ERR_NOMEM
- * Failed to allocate needed memory.
+ * Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_OPEN
- * Could not create a file, or failed to open an already-extracted file.
+ * Could not create a file, or failed to open an already-extracted file.
* @retval ::WIMLIB_ERR_READ
- * Failed to read data from the WIM file associated with @p wim.
+ * Failed to read data from the WIM.
* @retval ::WIMLIB_ERR_READLINK
* Failed to determine the target of a symbolic link in the WIM.
* @retval ::WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED
* Failed to fix the target of an absolute symbolic link (e.g. if the
- * target would have exceeded the maximum allowed length). (Only if
- * reparse data was supported by the extraction mode and
- * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS was specified in @p extract_flags.)
+ * target would have exceeded the maximum allowed length). (Only if
+ * reparse data was supported by the extraction mode and
+ * ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS was specified in @p
+ * extract_flags.)
* @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
* One of the files or directories that needed to be extracted referenced a
* stream not present in the WIM's lookup table (or in any of the lookup
* @retval ::WIMLIB_ERR_SET_TIMESTAMPS
* Failed to set timestamps on a file (only if
* ::WIMLIB_EXTRACT_FLAG_STRICT_TIMESTAMPS was specified in @p extract_flags).
- * @retval ::WIMLIB_ERR_SPLIT_INVALID
- * The WIM is a split WIM, but the parts specified do not form a complete
- * split WIM because they do not include all the parts of the original WIM,
- * there are duplicate parts, or not all the parts have the same GUID and
- * compression type.
* @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
- * Unexpected end-of-file occurred when reading data from the WIM file
- * associated with @p wim.
+ * Unexpected end-of-file occurred when reading data from the WIM.
* @retval ::WIMLIB_ERR_UNSUPPORTED
* A requested extraction flag, or the data or metadata that must be
* extracted to support it, is unsupported in the build and configuration
* ::WIMLIB_EXTRACT_FLAG_STRICT_SYMLINKS, ::WIMLIB_EXTRACT_FLAG_SYMLINK,
* and ::WIMLIB_EXTRACT_FLAG_HARDLINK. For example, if
* ::WIMLIB_EXTRACT_FLAG_STRICT_SHORT_NAMES is specified in @p
- * extract_flags,
- * ::WIMLIB_ERR_UNSUPPORTED will be returned if the WIM image contains one
- * or more files with short names, but extracting short names is not
- * supported --- on Windows, this occurs if the target volume does not
- * support short names, while on non-Windows, this occurs if
+ * extract_flags, ::WIMLIB_ERR_UNSUPPORTED will be returned if the WIM
+ * image contains one or more files with short names, but extracting short
+ * names is not supported --- on Windows, this occurs if the target volume
+ * does not support short names, while on non-Windows, this occurs if
* ::WIMLIB_EXTRACT_FLAG_NTFS was not specified in @p extract_flags.
+ * @retval ::WIMLIB_ERR_WIMBOOT
+ * ::WIMLIB_EXTRACT_FLAG_WIMBOOT was specified in @p extract_flags, but
+ * there was a problem creating WIMBoot pointer files.
* @retval ::WIMLIB_ERR_WRITE
* Failed to write data to a file being extracted.
*/
wimlib_extract_image(WIMStruct *wim, int image,
const wimlib_tchar *target,
int extract_flags,
- WIMStruct **additional_swms,
- unsigned num_additional_swms,
wimlib_progress_func_t progress_func);
/**
- * Since wimlib v1.5.0: Extract one or more images from a pipe on which a
- * pipable WIM is being sent.
+ * @ingroup G_extracting_wims
+ *
+ * Since wimlib v1.5.0: Extract one image from a pipe on which a pipable WIM is
+ * being sent.
*
* See the documentation for ::WIMLIB_WRITE_FLAG_PIPABLE for more information
* about pipable WIMs.
* wimlib_resolve_image() uses. However, unlike wimlib_extract_image(),
* only a single image (not all images) can be specified. Alternatively,
* specify @p NULL here to use the first image in the WIM if it contains
- * exactly one image but otherwise return @p WIMLIB_ERR_INVALID_IMAGE.
+ * exactly one image but otherwise return ::WIMLIB_ERR_INVALID_IMAGE.
* @param target
* Same as the corresponding parameter to wimlib_extract_image().
* @param extract_flags
* Same as the corresponding parameter to wimlib_extract_image(), except
- * for the following exceptions: ::WIMLIB_EXTRACT_FLAG_SEQUENTIAL is
- * always implied, since data is always read from @p pipe_fd sequentially
- * in this mode; also, ::WIMLIB_EXTRACT_FLAG_TO_STDOUT is invalid and will
+ * that ::WIMLIB_EXTRACT_FLAG_FILE_ORDER cannot be specified and will
* result in ::WIMLIB_ERR_INVALID_PARAM being returned.
* @param progress_func
* Same as the corresponding parameter to wimlib_extract_image(), except
* ::WIMLIB_PROGRESS_MSG_EXTRACT_SPWM_PART_BEGIN messages will also be
- * received.
+ * received by the progress function.
*
* @return 0 on success; nonzero on error. The possible error codes include
- * those returned by wimlib_extract_image() as well as the following:
+ * those returned by wimlib_extract_image() and wimlib_open_wim() as well as the
+ * following:
*
* @retval ::WIMLIB_ERR_INVALID_PIPABLE_WIM
* Data read from the pipable WIM was invalid.
wimlib_progress_func_t progress_func);
/**
- * Extracts the XML data of a WIM file to a file stream. Every WIM file
- * includes a string of XML that describes the images contained in the WIM.
- * This function works on standalone WIMs as well as split WIM parts.
+ * @ingroup G_extracting_wims
+ *
+ * Since wimlib v1.6.0: Similar to wimlib_extract_paths(), but the paths to
+ * extract from the WIM image are specified in the UTF-8 text file named by @p
+ * path_list_file which itself contains the list of paths to use, one per line.
+ * Leading and trailing whitespace, and otherwise empty lines and lines
+ * beginning with the ';' character are ignored. No quotes are needed as paths
+ * are otherwise delimited by the newline character.
+ *
+ * The error codes are the same as those returned by wimlib_extract_paths(),
+ * except that wimlib_extract_pathlist() returns an appropriate error code if it
+ * cannot read the path list file (::WIMLIB_ERR_OPEN, ::WIMLIB_ERR_STAT,
+ * ::WIMLIB_ERR_READ, ::WIMLIB_ERR_NOMEM, or ::WIMLIB_ERR_INVALID_UTF8_STRING).
+ */
+extern int
+wimlib_extract_pathlist(WIMStruct *wim, int image,
+ const wimlib_tchar *target,
+ const wimlib_tchar *path_list_file,
+ int extract_flags,
+ wimlib_progress_func_t progress_func);
+
+/**
+ * @ingroup G_extracting_wims
*
- * @param wim
- * Pointer to the ::WIMStruct for a WIM file.
- * @param fp
- * @c stdout, or a FILE* opened for writing, to extract the data to.
+ * Since wimlib v1.6.0: Extract zero or more paths (files or directory trees)
+ * from the specified WIM image.
*
- * @return 0 on success; nonzero on error.
- * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * By default, each path will be extracted to a corresponding subdirectory of
+ * the target based on its location in the WIM image. For example, if one of
+ * the paths to extract is "/Windows/explorer.exe" and the target is "outdir",
+ * the file will be extracted to "outdir/Windows/explorer.exe". This behavior
+ * can be changed by providing the flag
+ * ::WIMLIB_EXTRACT_FLAG_NO_PRESERVE_DIR_STRUCTURE, which will cause each file
+ * or directory tree to be placed directly in the target directory --- so the
+ * same example would extract "/Windows/explorer.exe" to "outdir/explorer.exe".
+ *
+ * Symbolic links will not be dereferenced when paths in the WIM image are
+ * interpreted.
+ *
+ * @param wim
+ * WIM from which to extract the paths, specified as a pointer to the
+ * ::WIMStruct for a standalone WIM file, a delta WIM file, or part 1 of a
+ * split WIM. In the case of a WIM file that is not standalone, this
+ * ::WIMStruct must have had any needed external resources previously
+ * referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files().
+ * @param image
+ * 1-based index of the WIM image from which to extract the paths.
+ * @param paths
+ * Array of paths to extract. Each element must be the absolute path to a
+ * file or directory within the WIM image. Separators may be either
+ * forwards or backwards slashes, and leading path separators are optional.
+ * The paths will be interpreted either case-sensitively (UNIX default) or
+ * case-insensitively (Windows default); this can be changed by
+ * wimlib_global_init().
+ * <br/>
+ * By default, the characters @c * and @c ? are interpreted literally.
+ * This can be changed by specifying ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS in @p
+ * extract_flags.
+ * <br/>
+ * By default, if any paths to extract do not exist, the error code
+ * ::WIMLIB_ERR_PATH_DOES_NOT_EXIST is returned. This behavior changes if
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS is specified in @p extract_flags.
+ * @param num_paths
+ * Number of paths specified in @p paths.
+ * @param target
+ * Directory to which to extract the paths; or with
+ * ::WIMLIB_EXTRACT_FLAG_NTFS specified in @p extract_flags, the path to an
+ * unmounted NTFS volume to which to extract the paths. Unlike the @p
+ * paths being extracted, the @p target must be native path. On UNIX-like
+ * systems it may not contain backslashes, for example.
+ * @param extract_flags
+ * Bitwise OR of flags prefixed with WIMLIB_EXTRACT_FLAG.
+ * @param progress_func
+ * If non-NULL, a function that will be called periodically with the
+ * progress of the current operation. The main message to look for is
+ * ::WIMLIB_PROGRESS_MSG_EXTRACT_STREAMS; however, there are others as
+ * well. Note: because the extraction code is stream-based and not
+ * file-based, there is no way to get information about which path is
+ * currently being extracted, but based on byte count you can still
+ * calculate an approximate percentage complete for the extraction overall
+ * which may be all you really need anyway.
+ *
+ * @return 0 on success; nonzero on error. Most of the error codes are the same
+ * as those returned by wimlib_extract_image(). Below, some of the error codes
+ * returned in situations specific to path-mode extraction are documented:
+ *
+ * @retval ::WIMLIB_ERR_INVALID_IMAGE
+ * @p image was ::WIMLIB_ALL_IMAGES or was otherwise not a valid single
+ * image in the WIM.
+ * @retval ::WIMLIB_ERR_PATH_DOES_NOT_EXIST
+ * One of the paths to extract did not exist in the WIM image. This error
+ * code can only be returned if ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS was not
+ * specified in @p extract_flags, or if both
+ * ::WIMLIB_EXTRACT_FLAG_GLOB_PATHS and ::WIMLIB_EXTRACT_FLAG_STRICT_GLOB
+ * were specified in @p extract_flags.
+ * @retval ::WIMLIB_ERR_NOT_A_REGULAR_FILE
+ * ::WIMLIB_EXTRACT_FLAG_TO_STDOUT was specified in @p extract_flags, but
+ * one of the paths to extract did not name a regular file.
+ */
+extern int
+wimlib_extract_paths(WIMStruct *wim,
+ int image,
+ const wimlib_tchar *target,
+ const wimlib_tchar * const *paths,
+ size_t num_paths,
+ int extract_flags,
+ wimlib_progress_func_t progress_func);
+
+/**
+ * @ingroup G_wim_information
+ *
+ * Extracts the XML data of a WIM file to a file stream. Every WIM file
+ * includes a string of XML that describes the images contained in the WIM.
+ *
+ * See wimlib_get_xml_data() to read the XML data into memory instead.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct for a WIM file, which does not necessarily
+ * have to be standalone (e.g. it could be part of a split WIM).
+ * @param fp
+ * @c stdout, or a FILE* opened for writing, to extract the data to.
+ *
+ * @return 0 on success; nonzero on error.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
* @p wim is not a ::WIMStruct that was created by wimlib_open_wim().
* @retval ::WIMLIB_ERR_NOMEM
* @retval ::WIMLIB_ERR_READ
wimlib_extract_xml_data(WIMStruct *wim, FILE *fp);
/**
+ * @ingroup G_general
+ *
* Frees all memory allocated for a WIMStruct and closes all files associated
* with it.
*
wimlib_free(WIMStruct *wim);
/**
+ * @ingroup G_general
+ *
* Converts a ::wimlib_compression_type value into a string.
*
* @param ctype
- * ::WIMLIB_COMPRESSION_TYPE_NONE, ::WIMLIB_COMPRESSION_TYPE_LZX,
- * ::WIMLIB_COMPRESSION_TYPE_XPRESS, or another value.
+ * The ::wimlib_compression_type value to convert.
*
* @return
- * A statically allocated string: "None", "LZX", "XPRESS", or "Invalid",
- * respectively.
+ * A statically allocated string naming the compression algorithm,
+ * such as "None", "LZX", "XPRESS", or "Invalid".
*/
extern const wimlib_tchar *
wimlib_get_compression_type_string(int ctype);
/**
+ * @ingroup G_general
+ *
* Converts an error code into a string describing it.
*
* @param code
wimlib_get_error_string(enum wimlib_error_code code);
/**
+ * @ingroup G_wim_information
+ *
* Returns the description of the specified image.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or a split WIM part.
+ * Pointer to the ::WIMStruct for a WIM file that does not necessarily have
+ * to be standalone (e.g. it could be part of a split WIM).
* @param image
* The number of the image, numbered starting at 1.
*
wimlib_get_image_description(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Returns the name of the specified image.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or a split WIM part.
+ * Pointer to the ::WIMStruct for a WIM file that does not necessarily have
+ * to be standalone (e.g. it could be part of a split WIM).
* @param image
* The number of the image, numbered starting at 1.
*
extern const wimlib_tchar *
wimlib_get_image_name(const WIMStruct *wim, int image);
+/**
+ * @ingroup G_general
+ *
+ * Returns the version of wimlib as a 32-bit number whose top 12 bits contain
+ * the major version, the next 10 bits contain the minor version, and the low 10
+ * bits contain the patch version.
+ *
+ * In other words, the returned value is equal to <code>((WIMLIB_MAJOR_VERSION
+ * << 22) | (WIMLIB_MINOR_VERSION << 10) | WIMLIB_PATCH_VERSION)</code> for the
+ * corresponding header file.
+ */
+extern uint32_t
+wimlib_get_version(void);
/**
+ * @ingroup G_wim_information
+ *
* Get basic information about a WIM file.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be for either a
- * standalone WIM or part of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM file that does not necessarily have
+ * to be standalone (e.g. it could be part of a split WIM).
* @param info
* A ::wimlib_wim_info structure that will be filled in with information
* about the WIM file.
wimlib_get_wim_info(WIMStruct *wim, struct wimlib_wim_info *info);
/**
+ * @ingroup G_wim_information
+ *
+ * Read the XML data of a WIM file into an in-memory buffer. Every WIM file
+ * includes a string of XML that describes the images contained in the WIM.
+ *
+ * See wimlib_extract_xml_data() to extract the XML data to a file stream
+ * instead.
+ *
+ * @param wim
+ * Pointer to the ::WIMStruct for a WIM file, which does not necessarily
+ * have to be standalone (e.g. it could be part of a split WIM).
+ * @param buf_ret
+ * On success, a pointer to an allocated buffer containing the raw UTF16-LE
+ * XML data is written to this location.
+ * @param bufsize_ret
+ * The size of the XML data in bytes is written to this location.
+ *
+ * @return 0 on success; nonzero on error.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p wim is not a ::WIMStruct that was created by wimlib_open_wim(), or
+ * @p buf_ret or @p bufsize_ret was @c NULL.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * @retval ::WIMLIB_ERR_READ
+ * @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
+ * Failed to read the XML data from the WIM.
+ */
+extern int
+wimlib_get_xml_data(WIMStruct *wim, void **buf_ret, size_t *bufsize_ret);
+
+/**
+ * @ingroup G_general
+ *
* Initialization function for wimlib. Call before using any other wimlib
- * function except wimlib_set_print_errors(). (However, currently this is not
- * strictly necessary and it will be called automatically if not done manually,
- * but you should not rely on this behavior.)
+ * function except wimlib_set_print_errors(). If not done manually, this
+ * function will be called automatically with @p init_flags set to
+ * ::WIMLIB_INIT_FLAG_ASSUME_UTF8. This function does nothing if called again
+ * after it has already successfully run.
*
* @param init_flags
* Bitwise OR of flags prefixed with WIMLIB_INIT_FLAG.
wimlib_global_init(int init_flags);
/**
+ * @ingroup G_general
+ *
* Cleanup function for wimlib. You are not required to call this function, but
* it will release any global resources allocated by the library.
*/
wimlib_global_cleanup(void);
/**
+ * @ingroup G_wim_information
+ *
* Determines if an image name is already used by some image in the WIM.
*
* @param wim
wimlib_image_name_in_use(const WIMStruct *wim, const wimlib_tchar *name);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through a file or directory tree in the WIM image. By specifying
* appropriate flags and a callback function, you can get the attributes of a
* file in the WIM, get a directory listing, or even get a listing of the entire
* WIM image.
*
* @param wim
- * Pointer to the ::WIMStruct for a standalone WIM file, or part 1 of a
- * split WIM.
+ * The WIM containing the image(s) over which to iterate, specified as a
+ * pointer to the ::WIMStruct for a standalone WIM file, a delta WIM file,
+ * or part 1 of a split WIM. In the case of a WIM file that is not
+ * standalone, this ::WIMStruct should have had any needed external
+ * resources previously referenced using wimlib_reference_resources() or
+ * wimlib_reference_resource_files(). If not, see
+ * ::WIMLIB_ITERATE_DIR_TREE_FLAG_RESOURCES_NEEDED for information about
+ * the behavior when resources are missing.
*
* @param image
* The 1-based number of the image in @p wim that contains the files or
* Path in the WIM image at which to do the iteration.
*
* @param flags
- * Bitwise OR of ::WIMLIB_ITERATE_DIR_TREE_FLAG_RECURSIVE and/or
- * ::WIMLIB_ITERATE_DIR_TREE_FLAG_CHILDREN.
+ * Bitwise OR of flags prefixed with WIMLIB_ITERATE_DIR_TREE_FLAG.
*
* @param cb
* A callback function that will receive each directory entry.
* Failed to allocate memory needed to create a ::wimlib_dir_entry.
*
* This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
- * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_NOMEM,
- * ::WIMLIB_ERR_READ, or ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which
- * indicate failure (for different reasons) to read the metadata resource for an
- * image over which iteration needed to be done.
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for an image over which
+ * iteration needed to be done.
*/
extern int
wimlib_iterate_dir_tree(WIMStruct *wim, int image, const wimlib_tchar *path,
wimlib_iterate_dir_tree_callback_t cb, void *user_ctx);
/**
+ * @ingroup G_wim_information
+ *
* Iterate through the lookup table of a WIM file. This can be used to directly
- * get a listing of the unique resources contained in a WIM file. Both file
- * resources and metadata resources are included.
+ * get a listing of the unique resources contained in a WIM file over all
+ * images. Both file resources and metadata resources are included. However,
+ * only resources actually included in the file represented by @a wim, plus
+ * explicitly referenced external resources (via wimlib_reference_resources() or
+ * wimlib_reference_resource_files()) are included in the iteration. For
+ * example, if @p wim represents just one part of a split WIM, then only
+ * resources in that part will be included, unless other resources were
+ * explicitly referenced.
*
* @param wim
- * Pointer to the ::WIMStruct of a standalone WIM file or a split WIM part.
- * Note: metadata resources will only be included if the WIM is standalone
- * or the first part of the split WIM.
+ * Pointer to the ::WIMStruct for a WIM file that does not necessarily have
+ * to be standalone (e.g. it could be part of a split WIM).
*
* @param flags
* Reserved; set to 0.
void *user_ctx);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Joins a split WIM into a stand-alone one-part WIM.
*
* @param swms
* Number of filenames in @p swms.
* @param swm_open_flags
* Open flags for the split WIM parts (e.g.
- * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY). Note: WIMLIB_OPEN_FLAG_SPLIT_OK is
- * automatically added to the value specified here.
+ * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY).
* @param wim_write_flags
* Bitwise OR of relevant flags prefixed with WIMLIB_WRITE_FLAG, which will
* be used to write the joined WIM.
* the parts of the original WIM, there are duplicate parts, or not all the
* parts have the same GUID and compression type.
*
- * Note: wimlib_export_image() can provide similar functionality to
- * wimlib_join(), since it is possible to export all images from a split WIM.
- * Actually, wimlib_join() currently calls wimlib_export_image internally.
+ * Note: wimlib is generalized enough that this function is not actually needed
+ * to join a split WIM; instead, you could open the first part of the split WIM,
+ * then reference the other parts with wimlib_reference_resource_files(), then
+ * write the joined WIM using wimlib_write(). However, wimlib_join() provides
+ * an easy-to-use wrapper around this that has some advantages (e.g. extra
+ * sanity checks).
*/
extern int
wimlib_join(const wimlib_tchar * const *swms,
int wim_write_flags,
wimlib_progress_func_t progress_func);
-/**
- * Compress a chunk of a WIM resource using LZX compression.
- *
- * This function is exported for convenience only and should only be used by
- * library clients looking to make use of wimlib's compression code for another
- * purpose.
- *
- * @param chunk
- * Uncompressed data of the chunk.
- * @param chunk_size
- * Size of the uncompressed chunk, in bytes.
- * @param out
- * Pointer to output buffer of size at least (@p chunk_size - 1) bytes.
- *
- * @return
- * The size of the compressed data written to @p out in bytes, or 0 if the
- * data could not be compressed to (@p chunk_size - 1) bytes or fewer.
- *
- * As a special requirement, the compression code is optimized for the WIM
- * format and therefore requires (@p chunk_size <= 32768).
- */
-extern unsigned
-wimlib_lzx_compress(const void *chunk, unsigned chunk_size, void *out);
/**
- * Decompresses a block of LZX-compressed data as used in the WIM file format.
- *
- * Note that this will NOT work unmodified for LZX as used in the cabinet
- * format, which is not the same as in the WIM format!
- *
- * This function is exported for convenience only and should only be used by
- * library clients looking to make use of wimlib's compression code for another
- * purpose.
- *
- * @param compressed_data
- * Pointer to the compressed data.
- *
- * @param compressed_len
- * Length of the compressed data, in bytes.
+ * @ingroup G_mounting_wim_images
*
- * @param uncompressed_data
- * Pointer to the buffer into which to write the uncompressed data.
- *
- * @param uncompressed_len
- * Length of the uncompressed data. It must be 32768 bytes or less.
- *
- * @return
- * 0 on success; non-zero on failure.
- */
-extern int
-wimlib_lzx_decompress(const void *compressed_data, unsigned compressed_len,
- void *uncompressed_data, unsigned uncompressed_len);
-
-
-/**
* Mounts an image in a WIM file on a directory read-only or read-write.
*
* As this is implemented using FUSE (Filesystme in UserSpacE), this is not
* @param dir
* The path to an existing empty directory to mount the image on.
* @param mount_flags
- * Bitwise OR of the flags prefixed with WIMLIB_MOUNT_FLAG.
- * @param additional_swms
- * Array of pointers to the ::WIMStruct for each additional part in the
- * split WIM. Ignored if @p num_additional_swms is 0. The pointers do not
- * need to be in any particular order, but they must include all parts of
- * the split WIM other than the first part, which must be provided in the
- * @p wim parameter.
- * @param num_additional_swms
- * Number of additional WIM parts provided in the @p additional_swms array.
- * This number should be one less than the total number of parts in the
- * split WIM. Set to 0 if the WIM is a standalone WIM.
+ * Bitwise OR of flags prefixed with WIMLIB_MOUNT_FLAG.
* @param staging_dir
* If non-NULL, the name of a directory in which the staging directory will
* be created. Ignored if ::WIMLIB_MOUNT_FLAG_READWRITE is not specified
* the on-disk WIM file could not be acquired because another thread or
* process has mounted an image from the WIM read-write or is currently
* modifying the WIM in-place.
- * @retval ::WIMLIB_ERR_DECOMPRESSION
- * Could not decompress the metadata resource for @p image in @p wim.
* @retval ::WIMLIB_ERR_FUSE
* A non-zero status was returned by @c fuse_main().
* @retval ::WIMLIB_ERR_INVALID_IMAGE
* @p image does not specify an existing, single image in @p wim.
- * @retval ::WIMLIB_ERR_INVALID_METADATA_RESOURCE
- * The metadata resource for @p image is invalid.
* @retval ::WIMLIB_ERR_INVALID_PARAM
* @p image is shared among multiple ::WIMStruct's as a result of a call to
* wimlib_export_image(), or @p image has been added with
* @retval ::WIMLIB_ERR_MKDIR
* ::WIMLIB_MOUNT_FLAG_READWRITE was specified in @p mount_flags, but the
* staging directory could not be created.
- * @retval ::WIMLIB_ERR_NOMEM
- * Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_NOTDIR
* Could not determine the current working directory.
- * @retval ::WIMLIB_ERR_READ
- * Failed to read data from the WIM file associated with @p wim.
* @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
* One of the dentries in the image referenced a stream not present in the
* WIM's lookup table (or in any of the lookup tables of the split WIM
* parts).
- * @retval ::WIMLIB_ERR_SPLIT_INVALID
- * The WIM is a split WIM, but the parts specified do not form a complete
- * split WIM because they do not include all the parts of the original WIM,
- * there are duplicate parts, or not all the parts have the same GUID and
- * compression type.
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
* ::WIMLIB_MOUNT_FLAG_READWRITE was specified in @p mount_flags, but @p
* wim is considered read-only because of any of the reasons mentioned in
* the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS flag.
- * @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
- * Unexpected end-of-file occurred while reading data from the WIM file
- * associated with @p wim.
* @retval ::WIMLIB_ERR_UNSUPPORTED
* Mounting is not supported, either because the platform is Windows, or
* because the platform is UNIX-like and wimlib was compiled with @c
* --without-fuse.
+ *
+ * This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for the image to mount.
*/
extern int
wimlib_mount_image(WIMStruct *wim,
int image,
const wimlib_tchar *dir,
int mount_flags,
- WIMStruct **additional_swms,
- unsigned num_additional_swms,
const wimlib_tchar *staging_dir);
/**
+ * @ingroup G_creating_and_opening_wims
+ *
* Opens a WIM file and creates a ::WIMStruct for it.
*
* @param wim_file
* chunk of the WIM does not match the corresponding message digest given
* in the integrity table.
* @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
- * Resources in @p wim_file are compressed, but the chunk size is not 32768.
+ * Resources in @p wim_file are compressed, but the chunk size was invalid
+ * for the WIM's compression type.
* @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
* The header of @p wim_file says that resources in the WIM are compressed,
- * but the header flag indicating LZX or XPRESS compression is not set.
+ * but the header flag for a recognized compression type is not set.
* @retval ::WIMLIB_ERR_INVALID_HEADER
* The header of @p wim_file was otherwise invalid.
* @retval ::WIMLIB_ERR_INVALID_INTEGRITY_TABLE
* wim_file contains an integrity table, but the integrity table is
* invalid.
* @retval ::WIMLIB_ERR_INVALID_LOOKUP_TABLE_ENTRY
- * The lookup table for the WIM contained duplicate entries that are not
- * for metadata resources, or it contained an entry with a SHA1 message
- * digest of all 0's.
+ * The lookup table for the WIM was invalid.
* @retval ::WIMLIB_ERR_INVALID_PARAM
* @p wim_ret was @c NULL.
+ * @retval ::WIMLIB_ERR_IS_SPLIT_WIM
+ * @p wim_file is a split WIM and ::WIMLIB_OPEN_FLAG_ERROR_IF_SPLIT was
+ * specified in @p open_flags.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocated needed memory.
* @retval ::WIMLIB_ERR_NOT_A_WIM_FILE
* Failed to open the file @p wim_file for reading.
* @retval ::WIMLIB_ERR_READ
* Failed to read data from @p wim_file.
- * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
- * @p wim_file is a split WIM, but ::WIMLIB_OPEN_FLAG_SPLIT_OK was not
- * specified in @p open_flags.
* @retval ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE
* Unexpected end-of-file while reading data from @p wim_file.
* @retval ::WIMLIB_ERR_UNKNOWN_VERSION
- * A number other than 0x10d00 is written in the version field of the WIM
- * header of @p wim_file. (May be a pre-Vista WIM.)
+ * The WIM version number was not recognized. (May be a pre-Vista WIM.)
+ * @retval ::WIMLIB_ERR_WIM_IS_ENCRYPTED
+ * The WIM cannot be opened because it contains encrypted segments. (It
+ * may be a Windows 8 "ESD" file).
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
* ::WIMLIB_OPEN_FLAG_WRITE_ACCESS was specified but the WIM file was
* considered read-only because of any of the reasons mentioned in the
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Overwrites the file that the WIM was originally read from, with changes made.
* This only makes sense for ::WIMStruct's obtained from wimlib_open_wim()
* rather than wimlib_create_new_wim().
* If non-NULL, a function that will be called periodically with the
* progress of the current operation.
*
- * @return 0 on success; nonzero on error. This function may return any value
- * returned by wimlib_write() as well as the following error codes:
+ * @return 0 on success; nonzero on error. This function may return most error
+ * codes returned by wimlib_write() as well as the following error codes:
+ *
* @retval ::WIMLIB_ERR_ALREADY_LOCKED
* The WIM was going to be modified in-place (with no temporary file), but
* an exclusive advisory lock on the on-disk WIM file could not be acquired
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Prints information about one image, or all images, contained in a WIM.
*
* @param wim
wimlib_print_available_images(const WIMStruct *wim, int image);
/**
+ * @ingroup G_wim_information
+ *
* Deprecated in favor of wimlib_get_wim_info(), which provides the information
* in a way that can be accessed programatically.
*/
wimlib_print_header(const WIMStruct *wim) _wimlib_deprecated;
/**
- * Deprecated in favor of wimlib_iterate_dir_tree(), which provides the
- * information in a way that can be accessed programatically.
+ * @ingroup G_nonstandalone_wims
+ *
+ * Reference resources from other WIM files or split WIM parts. This function
+ * can be used on WIMs that are not standalone, such as split or "delta" WIMs,
+ * to load needed resources (that is, "streams" keyed by SHA1 message digest)
+ * from other files, before calling a function such as wimlib_extract_image()
+ * that requires the resources to be present.
+ *
+ * @param wim
+ * The ::WIMStruct for a WIM that contains metadata resources, but is not
+ * necessarily "standalone". In the case of split WIMs, this should be the
+ * first part, since only the first part contains the metadata resources.
+ * In the case of delta WIMs, this should be the delta WIM rather than the
+ * WIM on which it is based.
+ * @param resource_wimfiles_or_globs
+ * Array of paths to WIM files and/or split WIM parts to reference.
+ * Alternatively, when ::WIMLIB_REF_FLAG_GLOB_ENABLE is specified in @p
+ * ref_flags, these are treated as globs rather than literal paths. That
+ * is, using this function you can specify zero or more globs, each of
+ * which expands to one or more literal paths.
+ * @param count
+ * Number of entries in @p resource_wimfiles_or_globs.
+ * @param ref_flags
+ * Bitwise OR of ::WIMLIB_REF_FLAG_GLOB_ENABLE and/or
+ * ::WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH.
+ * @param open_flags
+ * Additional open flags, such as ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY, to
+ * pass to internal calls to wimlib_open_wim() on the reference files.
+ * @param progress_func
+ * Passed to internal calls to wimlib_open_wim() on the reference files.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_GLOB_HAD_NO_MATCHES
+ * One of the specified globs did not match any paths (only with both
+ * ::WIMLIB_REF_FLAG_GLOB_ENABLE and ::WIMLIB_REF_FLAG_GLOB_ERR_ON_NOMATCH
+ * specified in @p ref_flags).
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Failed to allocate memory.
+ * @retval ::WIMLIB_ERR_READ
+ * I/O or permissions error while processing a file glob.
+ *
+ * This function can additionally return most values that can be returned by
+ * wimlib_open_wim().
*/
extern int
-wimlib_print_metadata(WIMStruct *wim, int image) _wimlib_deprecated;
+wimlib_reference_resource_files(WIMStruct *wim,
+ const wimlib_tchar * const *resource_wimfiles_or_globs,
+ unsigned count,
+ int ref_flags,
+ int open_flags,
+ wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_nonstandalone_wims
+ *
+ * Similar to wimlib_reference_resource_files(), but operates at a lower level
+ * where the caller must open the ::WIMStruct for each referenced file itself.
+ *
+ * @param wim
+ * The ::WIMStruct for a WIM that contains metadata resources, but is not
+ * necessarily "standalone". In the case of split WIMs, this should be the
+ * first part, since only the first part contains the metadata resources.
+ * @param resource_wims
+ * Array of pointers to the ::WIMStruct's for additional resource WIMs or
+ * split WIM parts to reference.
+ * @param num_resource_wims
+ * Number of entries in @p resource_wims.
+ * @param ref_flags
+ * Currently ignored (set to 0).
+ *
+ * @return 0 on success; nonzero on error. On success, the ::WIMStruct's of the
+ * @p resource_wims are referenced internally by @p wim and must not be freed
+ * with wimlib_free() or overwritten with wimlib_overwrite() until @p wim has
+ * been freed with wimlib_free(), or immediately before freeing @p wim with
+ * wimlib_free().
+ *
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p wim was @c NULL, or @p num_resource_wims was nonzero but @p
+ * resource_wims was @c NULL, or an entry in @p resource_wims was @p NULL.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Failed to allocate memory.
+ */
+extern int
+wimlib_reference_resources(WIMStruct *wim, WIMStruct **resource_wims,
+ unsigned num_resource_wims, int ref_flags);
+
+/**
+ * @ingroup G_modifying_wims
+ *
* Declares that a newly added image is mostly the same as a prior image, but
* captured at a later point in time, possibly with some modifications in the
* intervening time. This is designed to be used in incremental backups of the
* same filesystem or directory tree.
*
- * This function compares the directory tree of the newly added image against
- * that of the old image. Any files that are present in both the newly added
- * image and the old image and have timestamps that indicate they haven't been
- * modified are deemed not to have been modified. Such files will not be read
- * from the filesystem when the WIM is being written or overwritten. Note that
- * these unchanged files will still be "archived" and will be logically present
- * in the new image; the optimization is that they don't need to actually be
- * read from the filesystem because the WIM already contains them.
+ * This function compares the metadata of the directory tree of the newly added
+ * image against that of the old image. Any files that are present in both the
+ * newly added image and the old image and have timestamps that indicate they
+ * haven't been modified are deemed not to have been modified and have their
+ * SHA1 message digest copied from the old image. Because of this and because
+ * WIM uses single-instance streams, such files need not be read from the
+ * filesystem when the WIM is being written or overwritten. Note that these
+ * unchanged files will still be "archived" and will be logically present in the
+ * new image; the optimization is that they don't need to actually be read from
+ * the filesystem because the WIM already contains them.
*
* This function is provided to optimize incremental backups. The resulting WIM
* file will still be the same regardless of whether this function is called.
* wimlib_add_image()), but before writing the updated WIM file (e.g. with
* wimlib_overwrite()).
*
- * @p wim
+ * @param wim
* Pointer to the ::WIMStruct for a WIM.
- * @p new_image
+ * @param new_image
* 1-based index in the WIM of the newly added image. This image can have
* been added with wimlib_add_image() or wimlib_add_image_multisource(), or
* wimlib_add_empty_image() followed by wimlib_update_image().
- * @p template_image
+ * @param template_wim
+ * The ::WIMStruct for the WIM containing the template image. This can be
+ * the same as @p wim, or it can be a different ::WIMStruct.
+ * @param template_image
* 1-based index in the WIM of a template image that reflects a prior state
* of the directory tree being captured.
- * @p flags
+ * @param flags
* Reserved; must be 0.
- * @p progress_func
+ * @param progress_func
* Currently ignored, but reserved for a function that will be called with
* information about the operation. Use NULL if no additional information
* is desired.
* @retval ::WIMLIB_ERR_INVALID_IMAGE
* @p new_image and/or @p template_image were not a valid image indices in
* the WIM.
+ * @retval ::WIMLIB_ERR_METADATA_NOT_FOUND
+ * The specified ::WIMStruct did not actually contain the metadata resource
+ * for the new or template image; for example, it was a non-first part of a
+ * split WIM.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_INVALID_PARAM
* an image that had not been modified since opening the WIM.
*
* This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
- * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_NOMEM,
- * ::WIMLIB_ERR_READ, or ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which
- * indicate failure (for different reasons) to read the metadata resource for
- * the template image.
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for the template image.
*/
extern int
wimlib_reference_template_image(WIMStruct *wim, int new_image,
- int template_image, int flags,
- wimlib_progress_func_t progress_func);
+ WIMStruct *template_wim, int template_image,
+ int flags, wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_wim_information
+ *
* Translates a string specifying the name or number of an image in the WIM into
* the number of the image. The images are numbered starting at 1.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image_name_or_num
* A string specifying the name or number of an image in the WIM. If it
* parses to a positive integer, this integer is taken to specify the
const wimlib_tchar *image_name_or_num);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the description of an image in the WIM.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or part of a split WIM; however, you should set the same
- * description on all parts of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image
* The number of the image for which to change the description.
* @param description
const wimlib_tchar *description);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Set the compression chunk size of a WIM to use in subsequent calls to
+ * wimlib_write() or wimlib_overwrite().
+ *
+ * For compatibility reasons, using this function is not generally recommended.
+ * See the documentation for the @c --chunk-size option of <b>wimlib-imagex
+ * capture</b> for more information.
+ *
+ * A larger compression chunk size will likely result in a better compression
+ * ratio, but the speed of random access to the WIM will be reduced.
+ * Furthermore, the effect of a larger compression chunk size is limited by the
+ * size of each stream ("file") being compressed.
+ *
+ * @param wim
+ * ::WIMStruct for a WIM.
+ * @param chunk_size
+ * The chunk size (in bytes) to set. The valid chunk sizes are dependent
+ * on the compression format; see the documentation for the @c --chunk-size
+ * option of <b>wimlib-imagex capture</b> for more information. As a
+ * special case, if @p chunk_size is specified as 0, the chunk size is set
+ * to the default for the currently selected output compression type.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
+ * @p chunk_size is not a supported chunk size for the currently selected
+ * output compression type.
+ */
+extern int
+wimlib_set_output_chunk_size(WIMStruct *wim, uint32_t chunk_size);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Similar to wimlib_set_output_chunk_size(), but set the chunk size for writing
+ * packed streams.
+ */
+extern int
+wimlib_set_output_pack_chunk_size(WIMStruct *wim, uint32_t chunk_size);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Set the compression type of a WIM to use in subsequent calls to
+ * wimlib_write() or wimlib_overwrite().
+ *
+ * @param wim
+ * ::WIMStruct for a WIM.
+ * @param ctype
+ * The compression type to set (one of ::wimlib_compression_type). If this
+ * compression type is incompatible with the current output chunk size
+ * (either the default or as set with wimlib_set_output_chunk_size()), the
+ * output chunk size is reset to the default for that compression type.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype did not specify a valid compression type.
+ */
+extern int
+wimlib_set_output_compression_type(WIMStruct *wim, int ctype);
+
+/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Similar to wimlib_set_output_compression_type(), but set the compression type
+ * for writing packed streams (solid blocks).
+ */
+extern int
+wimlib_set_output_pack_compression_type(WIMStruct *wim, int ctype);
+
+/**
+ * @ingroup G_modifying_wims
+ *
* Set basic information about a WIM.
*
* @param wim
- * A WIMStruct for a standalone WIM file.
+ * Pointer to the ::WIMStruct for a WIM.
* @param info
* A struct ::wimlib_wim_info that contains the information to set. Only
* the information explicitly specified in the @p which flags need be
int which);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes what is written in the \<FLAGS\> element in the WIM XML data
* (something like "Core" or "Ultimate")
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or part of a split WIM; however, you should set the same
- * \<FLAGS\> element on all parts of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image
* The number of the image for which to change the description.
* @param flags
wimlib_set_image_flags(WIMStruct *wim, int image, const wimlib_tchar *flags);
/**
+ * @ingroup G_modifying_wims
+ *
* Changes the name of an image in the WIM.
*
* @param wim
- * Pointer to the ::WIMStruct for a WIM file. It may be either a
- * standalone WIM or part of a split WIM; however, you should set the same
- * name on all parts of a split WIM.
+ * Pointer to the ::WIMStruct for a WIM.
* @param image
* The number of the image for which to change the name.
* @param name
* @p wim is considered read-only because of any of the reasons mentioned
* in the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS flag.
*/
-extern int wimlib_set_image_name(WIMStruct *wim, int image,
- const wimlib_tchar *name);
+extern int
+wimlib_set_image_name(WIMStruct *wim, int image, const wimlib_tchar *name);
/**
+ * @ingroup G_general
+ *
* Set the functions that wimlib uses to allocate and free memory.
*
* These settings are global and not per-WIM.
* A function equivalent to @c realloc() that wimlib will use to reallocate
* memory. If @c NULL, the free function is set back to the default @c
* realloc() from the C library.
- * @return 0 on success; nonzero on error.
- * @retval ::WIMLIB_ERR_UNSUPPORTED
- * wimlib was compiled with the @c --without-custom-memory-allocator flag,
- * so custom memory allocators are unsupported.
+ * @return 0
*/
extern int
wimlib_set_memory_allocator(void *(*malloc_func)(size_t),
void *(*realloc_func)(void *, size_t));
/**
+ * @ingroup G_general
+ *
* Sets whether wimlib is to print error messages to @c stderr when a function
* fails. These error messages may provide information that cannot be
* determined only from the error code that is returned. Not every error will
wimlib_set_print_errors(bool show_messages);
/**
+ * @ingroup G_nonstandalone_wims
+ *
* Splits a WIM into multiple parts.
*
* @param wim
- * The ::WIMStruct for the WIM to split. It must be a standalone, one-part
- * WIM.
+ * The ::WIMStruct for the WIM to split.
* @param swm_name
* Name of the SWM file to create. This will be the name of the first
* part. The other parts will have the same name with 2, 3, 4, ..., etc.
* codes that can be returned by wimlib_write() as well as the following error
* codes:
*
- * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
- * @p wim was not part 1 of a stand-alone WIM.
* @retval ::WIMLIB_ERR_INVALID_PARAM
* @p swm_name was not a nonempty string, or @p part_size was 0.
*
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_mounting_wim_images
+ *
* Unmounts a WIM image that was mounted using wimlib_mount_image().
*
* The image to unmount is specified by the path to the mountpoint, not the
* original ::WIMStruct passed to wimlib_mount_image(), which should not be
* touched and also may have been allocated in a different process.
*
- * To unmount the image, the thread calling this function communicates with the
- * thread that is managing the mounted WIM image. This function blocks until it
+ * To unmount the image, the process calling this function communicates with the
+ * process that is managing the mounted WIM image. This function blocks until it
* is known whether the unmount succeeded or failed. In the case of a
* read-write mounted WIM, the unmount is not considered to have succeeded until
* all changes have been saved to the underlying WIM file.
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_modifying_wims
+ *
* Update a WIM image by adding, deleting, and/or renaming files or directories.
*
* @param wim
* If non-NULL, a function that will be called periodically with the
* progress of the current operation.
*
- * @return 0 on success; nonzero on error. On failure, some but not all of the
- * update commands may have been executed. No individual update command will
- * have been partially executed. Possible error codes include:
+ * @return 0 on success; nonzero on error. On failure, all update commands will
+ * be rolled back, and no visible changes shall have been made to @p wim.
+ * Possible error codes include:
*
- * @retval ::WIMLIB_ERR_DECOMPRESSION
- * Failed to decompress the metadata resource from @p image in @p wim.
* @retval ::WIMLIB_ERR_INVALID_CAPTURE_CONFIG
* The capture configuration structure specified for an add command was
* invalid.
* @retval ::WIMLIB_ERR_INVALID_REPARSE_DATA
* (Windows only): While executing an add command, tried to capture a
* reparse point with invalid data.
- * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
- * The metadata resource for @p image in @p wim is invalid.
- * @retval ::WIMLIB_ERR_INVALID_SECURITY_DATA
- * The security data for image @p image in @p wim is invalid.
* @retval ::WIMLIB_ERR_IS_DIRECTORY
* A delete command without ::WIMLIB_DELETE_FLAG_RECURSIVE specified was
* for a WIM path that corresponded to a directory; or, a rename command
* WIM path that did not exist; or, a rename command attempted to rename a
* file that does not exist.
* @retval ::WIMLIB_ERR_READ
- * Failed to read the metadata resource for @p image in @p wim; or, while
- * executing an add command, failed to read data from a file or directory
- * to be captured.
+ * While executing an add command, failed to read data from a file or
+ * directory to be captured.
* @retval ::WIMLIB_ERR_READLINK
* While executing an add command, failed to read the target of a symbolic
* link or junction point.
* @retval ::WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED
* (Windows only) Failed to perform a reparse point fixup because of
* problems with the data of a reparse point.
- * @retval ::WIMLIB_ERR_UNSUPPORTED_FILE
- * While executing an add command, attempted to capture a file that was not
- * a supported file type (e.g. a device file). Only if
- * ::WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE specified in @p the add_flags
- * for an update command.
* @retval ::WIMLIB_ERR_STAT
* While executing an add command, failed to get attributes for a file or
* directory.
* or, the platform is Windows and either the ::WIMLIB_ADD_FLAG_UNIX_DATA
* or the ::WIMLIB_ADD_FLAG_DEREFERENCE flags were specified in the @p
* add_flags for an update command.
+ * @retval ::WIMLIB_ERR_UNSUPPORTED_FILE
+ * While executing an add command, attempted to capture a file that was not
+ * a supported file type (e.g. a device file). Only if
+ * ::WIMLIB_ADD_FLAG_NO_UNSUPPORTED_EXCLUDE specified in @p the add_flags
+ * for an update command.
* @retval ::WIMLIB_ERR_WIM_IS_READONLY
* The WIM file is considered read-only because of any of the reasons
* mentioned in the documentation for the ::WIMLIB_OPEN_FLAG_WRITE_ACCESS
* flag.
+ *
+ * This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for an image that needed to
+ * be updated.
*/
extern int
wimlib_update_image(WIMStruct *wim,
wimlib_progress_func_t progress_func);
/**
- * Writes a standalone WIM to a file.
+ * @ingroup G_writing_and_overwriting_wims
+ *
+ * Writes a WIM to a file.
*
* This brings in resources from any external locations, such as directory trees
* or NTFS volumes scanned with wimlib_add_image(), or other WIM files via
* wimlib_export_image(), and incorporates them into a new on-disk WIM file.
*
+ * By default, the new WIM file is written as stand-alone. Using the
+ * ::WIMLIB_WRITE_FLAG_SKIP_EXTERNAL_WIMS flag, a "delta" WIM can be written
+ * instead. However, this function cannot directly write a "split" WIM; use
+ * wimlib_split() for that.
+ *
* @param wim
* Pointer to the ::WIMStruct for a WIM. There may have been in-memory
* changes made to it, which are then reflected in the output file.
* @param path
* The path to the file to write the WIM to.
* @param image
- * The 1-based index of the image inside the WIM to write. Use
- * ::WIMLIB_ALL_IMAGES to include all images.
+ * Normally, specify ::WIMLIB_ALL_IMAGES here. This indicates that all
+ * images are to be included in the new on-disk WIM file. If for some
+ * reason you only want to include a single image, specify the index of
+ * that image instead.
* @param write_flags
* Bitwise OR of any of the flags prefixed with @c WIMLIB_WRITE_FLAG.
* @param num_threads
*
* @return 0 on success; nonzero on error.
*
- * @retval ::WIMLIB_ERR_DECOMPRESSION
- * Failed to decompress a metadata or file resource in @p wim.
* @retval ::WIMLIB_ERR_INVALID_IMAGE
* @p image does not specify a single existing image in @p wim, and is not
* ::WIMLIB_ALL_IMAGES.
* message digest check.
* @retval ::WIMLIB_ERR_INVALID_PARAM
* @p path was @c NULL.
- * @retval ::WIMLIB_ERR_INVALID_METADATA_RESOURCE
- * The metadata resource for @p image in @p wim is invalid.
* @retval ::WIMLIB_ERR_NOMEM
* Failed to allocate needed memory.
* @retval ::WIMLIB_ERR_OPEN
* with @p wim, or some file resources in @p wim refer to files in the
* outside filesystem, and a read error occurred when reading one of these
* files.
- * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
- * @p wim is part of a split WIM, not a standalone WIM.
+ * @retval ::WIMLIB_ERR_RESOURCE_NOT_FOUND
+ * A stream that needed to be written could not be found in the stream
+ * lookup table of @p wim. This error can occur if, for example, @p wim is
+ * part of a split WIM but needed resources from the other split WIM parts
+ * were not referenced with wimlib_reference_resources() or
+ * wimlib_reference_resource_files() before the call to wimlib_write().
* @retval ::WIMLIB_ERR_WRITE
* An error occurred when trying to write data to the new WIM file.
+ *
+ * This function can additionally return ::WIMLIB_ERR_DECOMPRESSION,
+ * ::WIMLIB_ERR_INVALID_METADATA_RESOURCE, ::WIMLIB_ERR_METADATA_NOT_FOUND,
+ * ::WIMLIB_ERR_NOMEM, ::WIMLIB_ERR_READ, or
+ * ::WIMLIB_ERR_UNEXPECTED_END_OF_FILE, all of which indicate failure (for
+ * different reasons) to read the metadata resource for an image that needed to
+ * be written.
*/
extern int
wimlib_write(WIMStruct *wim,
wimlib_progress_func_t progress_func);
/**
+ * @ingroup G_writing_and_overwriting_wims
+ *
* Since wimlib v1.5.0: Same as wimlib_write(), but write the WIM directly to a
* file descriptor, which need not be seekable if the write is done in a special
* pipable WIM format by providing ::WIMLIB_WRITE_FLAG_PIPABLE in @p
wimlib_progress_func_t progress_func);
/**
- * This function is equivalent to wimlib_lzx_compress(), but instead compresses
- * the data using "XPRESS" compression.
+ * @defgroup G_compression Compression and decompression functions
+ *
+ * @brief Functions for LZX, XPRESS, and LZMS compression and decompression,
+ * exported for convenience only, as they are already used by wimlib internally
+ * when appropriate.
+ *
+ * These functions can be used for general-purpose lossless data compression,
+ * but some limitations apply; for example, none of the compressors or
+ * decompressors currently support sliding windows, and there also exist
+ * slightly different variants of these formats that are not supported
+ * unmodified.
+ *
+ * @{
*/
-extern unsigned
-wimlib_xpress_compress(const void *chunk, unsigned chunk_size, void *out);
+
+/** Header for compression parameters to pass to wimlib_create_compressor() or
+ * wimlib_set_default_compressor_params(). */
+struct wimlib_compressor_params_header {
+ /** Size of the parameters, in bytes. */
+ uint32_t size;
+};
+
+/** Header for decompression parameters to pass to wimlib_create_decompressor()
+ * or wimlib_set_default_decompressor_params() */
+struct wimlib_decompressor_params_header {
+ /** Size of the parameters, in bytes. */
+ uint32_t size;
+};
+
+/** LZX compression parameters that can optionally be passed to
+ * wimlib_create_compressor() with the compression type
+ * ::WIMLIB_COMPRESSION_TYPE_LZX. */
+struct wimlib_lzx_compressor_params {
+ /** hdr.size Must be set to the size of this structure, in bytes. */
+ struct wimlib_compressor_params_header hdr;
+
+ /** Relatively fast LZX compression algorithm with a decent compression
+ * ratio; the suggested default. */
+#define WIMLIB_LZX_ALGORITHM_FAST 0
+
+ /** Slower LZX compression algorithm that provides a better compression
+ * ratio. */
+#define WIMLIB_LZX_ALGORITHM_SLOW 1
+
+ /** Algorithm to use to perform the compression: either
+ * ::WIMLIB_LZX_ALGORITHM_FAST or ::WIMLIB_LZX_ALGORITHM_SLOW. The
+ * format is still LZX; this refers to the method the code will use to
+ * perform LZX-compatible compression. */
+ uint32_t algorithm : 3;
+
+ /** If set to 1, the default parameters for the specified algorithm are
+ * used rather than the ones specified in the following union. */
+ uint32_t use_defaults : 1;
+
+ union {
+ /** Parameters for the fast algorithm. */
+ struct wimlib_lzx_fast_params {
+ uint32_t fast_reserved1[10];
+ } fast;
+
+ /** Parameters for the slow algorithm. */
+ struct wimlib_lzx_slow_params {
+ /** If set to 1, the compressor can output length 2
+ * matches. If set 0, the compressor only outputs
+ * matches of length 3 or greater. Suggested value: 1
+ */
+ uint32_t use_len2_matches : 1;
+
+ uint32_t slow_reserved1 : 31;
+
+ /** Matches with length (in bytes) greater than or equal
+ * to this value are immediately taken without spending
+ * time on minimum-cost measurements. Suggested value:
+ * 32. */
+ uint32_t nice_match_length;
+
+ /** Number of passes to compute a match/literal sequence
+ * for each LZX block. This is for an iterative
+ * algorithm that attempts to minimize the cost of the
+ * match/literal sequence by using a cost model provided
+ * by the previous iteration. Must be at least 1.
+ * Suggested value: 2. */
+ uint32_t num_optim_passes;
+
+ /** Reserved; set to 0. */
+ uint32_t slow_reserved_blocksplit;
+
+ /** Maximum depth to search for matches at each
+ * position. Suggested value: 50. */
+ uint32_t max_search_depth;
+
+ /** Maximum number of potentially good matches to
+ * consider for each position. Suggested value: 3. */
+ uint32_t max_matches_per_pos;
+
+ uint32_t slow_reserved2[2];
+
+ /** Assumed cost of a main symbol with zero frequency.
+ * Must be at least 1 and no more than 16. Suggested
+ * value: 15. */
+ uint8_t main_nostat_cost;
+
+ /** Assumed cost of a length symbol with zero frequency.
+ * Must be at least 1 and no more than 16. Suggested
+ * value: 15. */
+ uint8_t len_nostat_cost;
+
+ /** Assumed cost of an aligned symbol with zero
+ * frequency. Must be at least 1 and no more than 8.
+ * Suggested value: 7. */
+ uint8_t aligned_nostat_cost;
+
+ uint8_t slow_reserved3[5];
+ } slow;
+ } alg_params;
+};
+
+/** LZMS compression parameters that can optionally be passed to
+ * wimlib_create_compressor() with the compression type
+ * ::WIMLIB_COMPRESSION_TYPE_LZMS. */
+struct wimlib_lzms_compressor_params {
+ /** hdr.size Must be set to the size of this structure, in bytes. */
+ struct wimlib_compressor_params_header hdr;
+
+ /** Minimum match length to output. This must be at least 2. Suggested
+ * value: 2 */
+ uint32_t min_match_length;
+
+ /** Maximum match length to output. This must be at least @p
+ * min_match_length. Suggested value: @p UINT32_MAX. */
+ uint32_t max_match_length;
+
+ /** Matches with length (in bytes) greater than or equal to this value
+ * are immediately taken without spending time on minimum-cost
+ * measurements. The minimum of @p max_match_length and @p
+ * nice_match_length may not exceed 65536. Suggested value: 32. */
+ uint32_t nice_match_length;
+
+ /** Maximum depth to search for matches at each position. Suggested
+ * value: 50. */
+ uint32_t max_search_depth;
+
+ /** Maximum number of potentially good matches to consider at each
+ * position. Suggested value: 3. */
+ uint32_t max_matches_per_pos;
+
+ /** Length of the array for the near-optimal LZ parsing algorithm. This
+ * must be at least 1. Suggested value: 1024. */
+ uint32_t optim_array_length;
+
+ uint64_t reserved2[4];
+};
+
+/** Opaque compressor handle. */
+struct wimlib_compressor;
+
+/** Opaque decompressor handle. */
+struct wimlib_decompressor;
/**
- * This function is equivalent to wimlib_lzx_decompress(), but instead assumes
- * the data is compressed using "XPRESS" compression.
+ * Set the default compression parameters for the specified compression type.
+ * This will affect both explicit and wimlib-internal calls to
+ * wimlib_create_compressor().
+ *
+ * @param ctype
+ * Compression type for which to set the default compression parameters.
+ * @param params
+ * Compression-type specific parameters. This may be @c NULL, in which
+ * case the "default default" parameters are restored.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * @p params were invalid.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Not enough memory to duplicate the parameters (perhaps @c params->size
+ * was invalid).
+ */
+extern int
+wimlib_set_default_compressor_params(enum wimlib_compression_type ctype,
+ const struct wimlib_compressor_params_header *params);
+
+/**
+ * Returns the approximate number of bytes needed to allocate a compressor with
+ * wimlib_create_compressor() for the specified compression type, block size,
+ * and parameters. @p params may be @c NULL, in which case the current default
+ * parameters for @p ctype are used. Returns 0 if the compression type or
+ * parameters are invalid.
+ */
+extern uint64_t
+wimlib_get_compressor_needed_memory(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ const struct wimlib_compressor_params_header *params);
+
+/**
+ * Allocate a compressor for the specified compression type using the specified
+ * parameters.
+ *
+ * @param ctype
+ * Compression type for which to create the compressor.
+ * @param max_block_size
+ * Maximum block size to support. The exact meaning and allowed values for
+ * this parameter depend on the compression type, but it at least specifies
+ * the maximum allowed value for @p uncompressed_size to wimlib_compress().
+ * @param extra_params
+ * An optional pointer to extra compressor parameters for the specified
+ * compression type. For LZX, a pointer to ::wimlib_lzx_compressor_params
+ * may be specified here. If left @c NULL, the default parameters are
+ * used.
+ * @param compressor_ret
+ * A location into which to return the pointer to the allocated compressor,
+ * which can be used for any number of calls to wimlib_compress() before
+ * being freed with wimlib_free_compressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * The compression parameters were invalid.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Insufficient memory to allocate the compressor.
*/
extern int
-wimlib_xpress_decompress(const void *compressed_data, unsigned compressed_len,
- void *uncompressed_data, unsigned uncompressed_len);
+wimlib_create_compressor(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ const struct wimlib_compressor_params_header *extra_params,
+ struct wimlib_compressor **compressor_ret);
+
+/**
+ * Losslessly compress a block of data using a compressor previously created
+ * with wimlib_create_compressor().
+ *
+ * @param uncompressed_data
+ * Buffer containing the data to compress.
+ * @param uncompressed_size
+ * Size, in bytes, of the data to compress.
+ * @param compressed_data
+ * Buffer into which to write the compressed data.
+ * @param compressed_size_avail
+ * Number of bytes available in @p compressed_data.
+ * @param compressor
+ * A compressor previously allocated with wimlib_create_compressor().
+ *
+ * @return
+ * The size of the compressed data, in bytes, or 0 if the input data could
+ * not be compressed to @p compressed_size_avail or fewer bytes.
+ */
+extern size_t
+wimlib_compress(const void *uncompressed_data, size_t uncompressed_size,
+ void *compressed_data, size_t compressed_size_avail,
+ struct wimlib_compressor *compressor);
+
+/**
+ * Free a compressor previously allocated with wimlib_create_compressor().
+ *
+ * @param compressor
+ * The compressor to free.
+ */
+extern void
+wimlib_free_compressor(struct wimlib_compressor *compressor);
+
+/**
+ * Set the default decompression parameters for the specified compression type.
+ * This will affect both explicit and wimlib-internal calls to
+ * wimlib_create_decompressor().
+ *
+ * @param ctype
+ * Compression type for which to set the default decompression parameters.
+ * @param params
+ * Compression-type specific parameters. This may be @c NULL, in which
+ * case the "default default" parameters are restored.
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Not enough memory to duplicate the parameters (perhaps @c params->size
+ * was invalid).
+ */
+extern int
+wimlib_set_default_decompressor_params(enum wimlib_compression_type ctype,
+ const struct wimlib_decompressor_params_header *params);
+
+/**
+ * Allocate a decompressor for the specified compression type using the
+ * specified parameters.
+ *
+ * @param ctype
+ * Compression type for which to create the decompressor.
+ * @param max_block_size
+ * Maximum block size to support. The exact meaning and allowed values for
+ * this parameter depend on the compression type, but it at least specifies
+ * the maximum allowed value for @p uncompressed_size to
+ * wimlib_decompress().
+ * @param extra_params
+ * An optional pointer to extra decompressor parameters for the specified
+ * compression type. If @c NULL, the default parameters are used.
+ * @param decompressor_ret
+ * A location into which to return the pointer to the allocated
+ * decompressor, which can be used for any number of calls to
+ * wimlib_decompress() before being freed with wimlib_free_decompressor().
+ *
+ * @return 0 on success; nonzero on error.
+ *
+ * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
+ * @p ctype was not a supported compression type.
+ * @retval ::WIMLIB_ERR_INVALID_PARAM
+ * The decompression parameters were invalid.
+ * @retval ::WIMLIB_ERR_NOMEM
+ * Insufficient memory to allocate the decompressor.
+ */
+extern int
+wimlib_create_decompressor(enum wimlib_compression_type ctype,
+ size_t max_block_size,
+ const struct wimlib_decompressor_params_header *extra_params,
+ struct wimlib_decompressor **decompressor_ret);
+
+/**
+ * Decompress a block of data using a decompressor previously created with
+ * wimlib_create_decompressor().
+ *
+ * @param compressed_data
+ * Buffer containing the data to decompress.
+ * @param compressed_size
+ * Size, in bytes, of the data to decompress.
+ * @param uncompressed_data
+ * Buffer into which to write the uncompressed data.
+ * @param uncompressed_size
+ * Size, in bytes, of the data when uncompressed.
+ * @param decompressor
+ * A decompressor previously allocated with wimlib_create_decompressor().
+ *
+ * @return 0 on success; nonzero on error.
+ */
+extern int
+wimlib_decompress(const void *compressed_data, size_t compressed_size,
+ void *uncompressed_data, size_t uncompressed_size,
+ struct wimlib_decompressor *decompressor);
+
+/**
+ * Free a decompressor previously allocated with wimlib_create_decompressor().
+ *
+ * @param decompressor
+ * The decompressor to free.
+ */
+extern void
+wimlib_free_decompressor(struct wimlib_decompressor *decompressor);
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
#endif /* _WIMLIB_H */
git://wimlib.net / wimlib / blobdiff