--- /dev/null
+.TH WIMLIB-IMAGEX "1" "March 2014" "@IMAGEX_PROGNAME@ @VERSION@" "User Commands"
+.SH NAME
+@IMAGEX_PROGNAME@-export \- Exports an image from a WIM archive to an existing or new WIM archive
+.SH SYNOPSIS
+\fB@IMAGEX_PROGNAME@ export\fR \fISRC_WIMFILE\fR \fISRC_IMAGE\fR
+\fIDEST_WIMFILE\fR [\fIDEST_IMAGE_NAME\fR [\fIDEST_IMAGE_DESCRIPTION\fR]]
+[\fIOPTION\fR...]
+.SH DESCRIPTION
+Copies the specified image in \fISRC_WIMFILE\fR to \fIDEST_WIMFILE\fR,
+optionally changing its name and/or description and/or compression type.
+If \fIDEST_WIMFILE\fR exists, it is taken be be a WIM archive to which the image
+will be appended. Otherwise, it is created as a new WIM archive containing only
+the exported image.
+This command is also available as simply \fBwimexport\fR if the appropriate hard
+link or batch file has been installed.
+.PP
+\fISRC_IMAGE\fR specifies the image in \fISRC_WIMFILE\fR to export. It may be a
+1-based index of an image in \fISRC_WIMFILE\fR, the name of an image in
+\fISRC_WIMFILE\fR, or the keyword "all" to indicate that all images in
+\fISRC_WIMFILE\fR are to be exported. Use the \fB@IMAGEX_PROGNAME@ info\fR (1)
+command to list the images a WIM file contains.
+.PP
+If specified, \fIDEST_IMAGE_NAME\fR is the name to give the image being exported
+to \fIDEST_WIMFILE\fR. The default is its name in \fISRC_WIMFILE\fR.
+\fIDEST_IMAGE_NAME\fR cannot be specified if multiple images are being exported.
+.PP
+If specified, \fIDEST_IMAGE_DESCRIPTION\fR is the description to give the image
+being exported to \fIDEST_WIMFILE\fR. The default is its description in
+\fISRC_WIMFILE\fR.
+.PP
+\fB@IMAGEX_PROGNAME@ export\fR supports exporting images from stand-alone WIMs as well as
+from split WIMs. However, you cannot export an image to a split WIM. See
+\fBSPLIT WIMS\fR.
+.PP
+\fB@IMAGEX_PROGNAME@ export\fR also supports exporting images from a non-pipable
+WIM into a (possibly new) pipable WIM, and vice versa. Furthermore, it will
+export a pipable WIM directly to standard output if "-" is specified as
+\fIDEST_WIMFILE\fR (this implies \fB--pipable\fR). See \fB--pipable\fR and
+\fB--not-pipable\fR.
+.PP
+.SH OPTIONS
+.TP 6
+\fB--boot\fR
+Specifies that the exported image is to be the bootable image of the destination
+WIM archive.
+.IP ""
+If multiple images are being exported, this flag indicates that the image in the
+\fISRC_WIMFILE\fR that is currently marked as bootable is to be made bootable in
+\fIDEST_WIMFILE\fR. If no image in \fISRC_WIMFILE\fR is bootable, it is an
+error.
+.TP
+\fB--check\fR
+When reading \fISRC_WIMFILE\fR, and \fIDEST_WIMFILE\fR if it exists, verify the
+file's integrity if the integrity table is present; additionally, when writing
+\fIDEST_WIMFILE\fR with the new image(s) added, write an integrity table.
+If neither \fB--check\fR nor \fB--nocheck\fR is specified, an integrity
+table is included in \fIDEST_WIMFILE\fR if and only if \fIDEST_WIMFILE\fR
+already existed and it had an integrity table before.
+.TP
+\fB--nocheck\fR
+When writing \fIDEST_WIMFILE\fR with the new image(s) added, do not write an
+integrity table.
+If neither \fB--check\fR nor \fB--nocheck\fR is specified, an integrity
+table is included in \fIDEST_WIMFILE\fR if and only if \fIDEST_WIMFILE\fR
+already existed and it had an integrity table before.
+.TP
+\fB--compress\fR=\fITYPE\fR
+Specifies the compression type for \fIDEST_WIMFILE\fR. This is only valid if
+\fIDEST_WIMFILE\fR does not yet exist, since if \fIDEST_WIMFILE\fR exists, the
+compression type must be the same as that of \fIDEST_WIMFILE\fR.
+.IP ""
+\fITYPE\fR may be "none", "maximum", or "fast". By default, it is the same as
+that of the input WIM file.
+.IP ""
+You may also specify the actual names of the compression algorithms, "XPRESS"
+and "LZX", instead of "fast" and "maximum", respectively.
+.IP ""
+\fITYPE\fR may also be "recovery" (or "LZMS"); however, this will result in
+reduced compatibility. See the documentation for this option to
+\fB@IMAGEX_PROGNAME@ capture\fR (1) for more details.
+.TP
+\fB--compress-slow\fR
+Spend even more time compressing the data to achieve a very slightly better
+compression ratio. This currently only has an effect for LZX ("maximum") and
+LZMS ("recovery") compression. This option does not itself set the compression
+format.
+.TP
+\fB--pack-streams\fR, \fB--solid\fR
+Create a "solid" archive that compresses multiple files together. This can
+result in a higher compression ratio, but has disadvantages such as reduced
+compatibility; see the documentation for this option to
+\fB@IMAGEX_PROGNAME@ capture\fR (1) for more details.
+.TP
+\fB--pack-chunk-size\fR=\fISIZE\fR, \fB--solid-chunk-size\fR=\fISIZE\fR
+Like \fB--chunk-size\fR, but set the chunk size used in packed resources.
+.TP
+\fB--threads\fR=\fINUM_THREADS\fR
+Number of threads to use for compressing data. Default: autodetect (number of
+processors). Note: multiple compressor threads are not very useful when
+exporting to a WIM with the same compression type as the source WIM, since
+wimlib optimizes this case by re-using the raw compressed data.
+.TP
+\fB--rebuild\fR
+When exporting image(s) to an existing WIM: rebuild the entire WIM rather than
+appending data to the end of it. Rebuilding the WIM is slower, but will save a
+little bit of space that would otherwise be left as a hole in the WIM. Also see
+\fB@IMAGEX_PROGNAME@ optimize\fR.
+.TP
+\fB--ref\fR="\fIGLOB\fR"
+File glob of additional WIMs or split WIM parts to reference resources from.
+See \fBSPLIT_WIMS\fR. This option can be specified multiple times. Note:
+\fIGLOB\fR is listed in quotes because it is interpreted by
+\fB@IMAGEX_PROGNAME@\fR and may need to be quoted to protect against shell
+expansion.
+.TP
+\fB--pipable\fR
+Build, or rebuild, \fIDEST_WIMFILE\fR as a "pipable WIM" so that it can be
+applied fully sequentially, including from a pipe. See \fB@IMAGEX_PROGNAME@
+capture\fR(1) for more details about creating pipable WIMs. The default without
+this option is to make \fIDEST_WIMFILE\fR pipable if and only if it already
+existed and was already pipable, or was "-" (standard output).
+.TP
+\fB--not-pipable\fR
+Build, or rebuild, \fIDEST_WIMFILE\fR as a normal, non-pipable WIM. This is the
+default behavior, unless \fIDEST_WIMFILE\fR already existed and was already
+pipable, or if \fIDEST_WIMFILE\fR was "-" (standard output).
+.SH SPLIT WIMS
+You may use \fB@IMAGEX_PROGNAME@ export\fR to export images from a split WIM.
+The \fISRC_WIMFILE\fR argument must specify the first part of the split WIM,
+while the additional parts of the split WIM must be specified in one or more
+\fB--ref\fR="\fIGLOB\fR" options. Since globbing is built into the \fB--ref\fR
+option, typically only one \fB--ref\fR option is necessary. For example, the
+names for the split WIM parts usually go something like:
+.PP
+.RS
+.nf
+mywim.swm
+mywim2.swm
+mywim3.swm
+mywim4.swm
+mywim5.swm
+.RE
+.PP
+To export the first image of this split WIM to a new or existing WIM file
+"other.wim", run:
+.PP
+.RS
+@IMAGEX_PROGNAME@ export mywim.swm 1 other.wim --ref="mywim*.swm"
+.RE
+.SH NOTES
+\fIData integrity\fR: It is safe to abort a \fB@IMAGEX_PROGNAME@ export\fR command partway through.
+However, after doing this, it is recommended to run \fB@IMAGEX_PROGNAME@
+optimize\fR on the destination WIM to remove any data that was appended to the
+physical WIM file but not yet incorporated into the structure of the WIM, unless
+the WIM was being rebuilt (e.g. with \fB--rebuild\fR), in which case you should
+delete the temporary file left over.
+.PP
+\fISingle instancing\fR: The WIM format uses single-instance streams (roughly,
+"files"). When an image is exported, only the streams ("files") not already
+present in the destination WIM will be copied. However, a new copy of the
+image's metadata resource, which describes the full directory structure, will
+always be created.
+.PP
+\fIESD files\fR: wimlib v1.6.0 and later can export images from version 3584
+WIMs, which usually contain LZMS-compressed solid blocks and may carry the
+\fI.esd\fR file extension rather than \fI.wim\fR. However, \fI.esd\fR files
+downloaded directly by the Windows 8 web downloader have encrypted segments, and
+wimlib cannot export images from such files until they are first decrypted. In
+addition, to ensure the destination archive is created in the original WIM
+format rather than in the newer format, specify \fB--compress\fR=\fImaximum\fR.
+.SH EXAMPLES
+Export the second image of 'boot.wim' to the new WIM file 'new.wim':
+.RS
+.PP
+@IMAGEX_PROGNAME@ export boot.wim 2 new.wim
+.RE
+.PP
+The above example creates "new.wim" with the same compression type as
+"boot.wim". If you wish to change the compression type, specify
+\fB--compress\fR=\fITYPE\fR; for example:
+.RS
+.PP
+@IMAGEX_PROGNAME@ export boot.wim 2 new.wim --compress=maximum
+.RE
+.PP
+.SH SEE ALSO
+.BR @IMAGEX_PROGNAME@ (1)
+.BR @IMAGEX_PROGNAME@-info (1)
+.BR @IMAGEX_PROGNAME@-optimize (1)
git://wimlib.net / wimlib / blobdiff