-.TH IMAGEX "1" "November 2012" "imagex (wimlib) wimlib @VERSION@" "User Commands"
+.TH WIMLIB-IMAGEX "1" "January 2014" "@IMAGEX_PROGNAME@ @VERSION@" "User Commands"
.SH NAME
-imagex-optimize \- Optimize a WIM archive
-
+@IMAGEX_PROGNAME@-optimize \- Optimize a WIM archive
.SH SYNOPSIS
-\fBimagex optimize\fR \fIWIMFILE\fR [--check] [--recompress]
-
+\fB@IMAGEX_PROGNAME@ optimize\fR \fIWIMFILE\fR [\fIOPTION\fR...]
.SH DESCRIPTION
-.PP
-\fBimagex optimize\fR will rebuild the stand-alone WIM \fIWIMFILE\fR. The new
+\fB@IMAGEX_PROGNAME@ optimize\fR will rebuild the stand-alone WIM \fIWIMFILE\fR. The new
WIM is written to a temporary file, and it is renamed to the original file when
it's ready. This action will remove any holes that have been left as a result
of appending images, so the new WIM may be slightly smaller than the old WIM.
In addition, some errors in the original WIM may be fixed by re-writing it
(although most cannot).
-
+This command is also available as simply \fBwimoptimize\fR if the appropriate
+hard link or batch file has been installed.
.SH OPTIONS
.TP 6
\fB--check\fR
-When reading \fIWIMFILE\fR, verify its integrity if the integrity table is
-present; include an integrity table in the optimized WIM. If this option is not
-specified and \fIWIMFILE\fR, no integrity table is included in the optimized
-WIM, even if there was one before.
-.TP 6
+When reading \fIWIMFILE\fR, verify its integrity if an integrity table is
+present. In addition, include an integrity table in the optimized WIM. If this
+option is not specified, by default the integrity table (if present) is not
+checked, and an integrity table is included in the rebuilt WIM if and only if
+one was present in the original WIM.
+.TP
+\fB--nocheck\fR
+Neither verify the integrity of \fIWIMFILE\fR using the integrity table, nor
+include an integrity table in the rebuilt WIM file.
+.TP
\fB--recompress\fR
Recompress all compressed streams in \fIWIMFILE\fR when rebuilding it. This
-will increase the time needed to rebuild the WIM,unless the WIM is uncompressed,
-but it may result in a better compression ratio if wimlib can do a better job
-than the program that wrote the original file. A side effect of this is that
-every stream in the original WIM will be checksummed, so this can help verify
-that the WIM is intact (equivalent to applying all the images from it).
-
+will increase the time needed to rebuild the WIM, unless the WIM is
+uncompressed, but it may result in a better compression ratio if wimlib can do a
+better job than the program that wrote the original file. A side effect of this
+is that every stream in the original WIM will be checksummed, so this can help
+verify that the WIM is intact (equivalent to applying all the images from it).
+.IP ""
+Note: as of wimlib v1.5.3, wimlib's LZX compressor usually achieves the same or
+better compression than Microsoft's, but is slightly slower.
+.TP
+\fB--recompress-slow\fR, \fB--compress-slow\fR
+Spend even more time compressing the data in order to achieve a more optimal
+compression ratio. For LZX ("maximum") compression, compared to the default
+\fB--recompress\fR this will make compression about twice as slow and may
+improve the compression ratio by maybe 1%, depending on the data. For LZMS
+("recovery") compression this option also has an effect. For XPRESS ("fast")
+compression this option has no effect; however you may use \fB--compress\fR=LZX
+\fB--recompress-slow\fR to change the compression type to LZX and recompress
+slowly, as per this option. In any case, this option implies
+\fB--recompress\fR.
+.TP
+\fB--compress\fR=\fITYPE\fR
+Recompress the WIM file using the specified compression type. \fITYPE\fR may be
+"none", "fast" (or "XPRESS"), or "maximum" (or "LZX"). This implies
+\fB--recompress\fR.
+.IP ""
+\fITYPE\fR may also be "recovery" (or "LZMS"); however, this will result in
+reduced compatibility. See the documentation for this option to
+\fB@IMAGEX_PROGNAME@ capture\fR (1) for more details.
+.TP
+\fB--chunk-size\fR=\fISIZE\fR
+Set the WIM compression chunk size to \fISIZE\fR. See the documentation for
+this option to \fB@IMAGEX_PROGNAME@ capture\fR (1) for more details.
+.TP
+\fB--pack-streams\fR, \fB--solid\fR
+Create a "solid" archive that compresses multiple files together. This can
+result in a higher compression ratio, but has disadvantages such as reduced
+compatibility; see the documentation for this option to
+\fB@IMAGEX_PROGNAME@-capture\fR (1) for more details.
+.TP
+\fB--threads\fR=\fINUM_THREADS\fR
+Number of threads to use for compressing data. Default: autodetect (number of
+processors). This parameter is only meaningful when \fB--recompress\fR is also
+specified.
+.TP
+\fB--pipable\fR
+Rebuild the WIM so that it can be applied fully sequentially, including from a
+pipe. See \fB@IMAGEX_PROGNAME@ capture\fR(1) for more details about creating
+pipable WIMs. By default, when neither \fB--pipable\fR or \fB--not-pipable\fR
+is specified, the rebuilt WIM will be pipable if and only if it was already
+pipable.
+.TP
+\fB--not-pipable\fR
+Rebuild the WIM in the non-pipable format. (This is the default if
+\fIWIMFILE\fR is not pipable.)
.SH NOTES
-
-\fBimagex optimize\fR does not support split WIMs.
-
-\fBimagex optimize\fR is roughly equivalent to:
+\fB@IMAGEX_PROGNAME@ optimize\fR does not support split WIMs.
+.PP
+\fB@IMAGEX_PROGNAME@ optimize\fR is roughly equivalent to:
.RS
.PP
-\fBimagex export\fR \fIWIMFILE\fR all tmp.wim [--check] && mv tmp.wim \fIWIMFILE\fR
+\fB@IMAGEX_PROGNAME@ export\fR \fIWIMFILE\fR all tmp.wim && mv tmp.wim \fIWIMFILE\fR
.RE
.PP
-
.SH SEE ALSO
-.BR imagex (1)
-.BR imagex-export (1)
-
+.BR @IMAGEX_PROGNAME@ (1)
+.BR @IMAGEX_PROGNAME@-export (1)
git://wimlib.net / wimlib / blobdiff