-.TH IMAGEX "1" "November 2012" "imagex (wimlib) wimlib @VERSION@" "User Commands"
+.TH IMAGEX "1" "June 2013" "@IMAGEX_PROGNAME@ @VERSION@" "User Commands"
.SH NAME
-imagex-mount, imagex-mountrw, imagex-unmount \- Mount and unmount an image from a WIM archive
-
+@IMAGEX_PROGNAME@-mount, @IMAGEX_PROGNAME@-mountrw, @IMAGEX_PROGNAME@-unmount \- Mount and unmount an image from a WIM archive
.SH SYNOPSIS
-\fBimagex mount\fR \fIWIMFILE\fR \fIIMAGE\fR \fIDIRECTORY\fR [--check]
-[--streams-interface=\fIINTERFACE\fR] [--ref="\fIGLOB\fR"]
+\fB@IMAGEX_PROGNAME@ mount\fR \fIWIMFILE\fR [\fIIMAGE\fR] \fIDIRECTORY\fR [\fIOPTION\fR...]
.br
-\fBimagex mountrw\fR \fIWIMFILE\fR \fIIMAGE\fR \fIDIRECTORY\fR [--check]
-[--streams-interface=\fIINTERFACE\fR] [--staging-dir=\fIDIR\fR]
+\fB@IMAGEX_PROGNAME@ mountrw\fR \fIWIMFILE\fR [\fIIMAGE\fR] \fIDIRECTORY\fR [\fIOPTION\fR...]
.br
-\fBimagex unmount\fR \fIDIRECTORY\fR [--commit] [--check] [--rebuild]
-
+\fB@IMAGEX_PROGNAME@ unmount\fR \fIDIRECTORY\fR [--commit] [--check] [--rebuild]
.SH DESCRIPTION
+The \fB@IMAGEX_PROGNAME@ mount\fR and \fB@IMAGEX_PROGNAME@ mountrw\fR commands
+will mount the image in the Windows Imaging (WIM) file \fIWIMFILE\fR specified
+by \fIIMAGE\fR on the directory \fIDIRECTORY\fR using FUSE (Filesystem in
+Userspace). \fB@IMAGEX_PROGNAME@ mount\fR will mount the image read-only, while
+\fB@IMAGEX_PROGNAME@ mountrw\fR will mount the image read-write.
.PP
-The \fBimagex mount\fR and \fBimagex mountrw\fR commands will mount the image in
-the Windows Imaging (WIM) file \fIWIMFILE\fR specified by \fIIMAGE\fR on the
-directory \fIDIRECTORY\fR using FUSE (Filesystem in Userspace). \fBimagex
-mount\fR will mount the image read-only, while \fBimagex mountrw\fR will mount
-the image read-write.
-
\fIIMAGE\fR may be a 1-based index of the image in the WIM to mount, or it may
-be the name of an image in the WIM. Use the \fBimagex info\fR (1) command to
-see the available images in the WIM. It is possible to omit \fIIMAGE\fR, but
-only if the WIM contains only one image.
-
-The WIM image can be unmounted using the \fBimagex unmount\fR command. Changes
+be the name of an image in the WIM. Use the \fB@IMAGEX_PROGNAME@ info\fR (1)
+command to see the available images in the WIM. \fIIMAGE\fR may be omitted if
+\fIWIMFILE\fR contains only one image.
+.PP
+The WIM image can be unmounted using the \fB@IMAGEX_PROGNAME@ unmount\fR command. Changes
made to a WIM mounted read-write will be discarded unless the \fB--commit\fR
-flag is provided to \fBimagex unmount\fR.
-
+flag is provided to \fB@IMAGEX_PROGNAME@ unmount\fR.
.SH SPLIT WIMS
-
-You may use \fBimagex mount\fR to mount an image from a split WIM read-only.
+You may use \fB@IMAGEX_PROGNAME@ mount\fR to mount an image from a split WIM read-only.
However, you may not mount an image from a split WIM read-write.
-
+.PP
The \fIWIMFILE\fR argument is used to specify the first part of the split WIM, and
the \fB--refs\fR="\fIGLOB\fR" option is used to provide a shell-style file glob
that specifies the additional parts of the split WIM. \fIGLOB\fR is expected to
the split WIM, except optionally the first part which may either omitted or
included in the glob (but the first part MUST be specified as \fIWIMFILE\fR as
well).
-
+.PP
Here's an example. The names for the split WIMs usually go something like:
-
.RS
.PP
.nf
mywim4.swm
mywim5.swm
.RE
-
+.PP
To mount the first image of this split WIM to the directory "dir", we would do:
.PP
.RS
-imagex mount mywim.swm 1 dir --ref="mywim*.swm"
+@IMAGEX_PROGNAME@ mount mywim.swm 1 dir --ref="mywim*.swm"
.RE
.PP
-
.SH NOTES
-
-If wimlib was configured using the --without-fuse flag, then the \fBimagex
-mount\fR, \fBimagex mountrw\fR, and \fBimagex unmount\fR commands will not work.
-
+If wimlib was configured using the \fB--without-fuse\fR flag, then the
+\fB@IMAGEX_PROGNAME@ mount\fR, \fB@IMAGEX_PROGNAME@ mountrw\fR, and
+\fB@IMAGEX_PROGNAME@ unmount\fR commands will not work. Also, these commands
+are not available in the Windows builds of wimlib.
+.PP
You can mount multiple images from a WIM file read-only at the same time, but
you can only mount one image at a time from a WIM read-write.
-
+.PP
All files in the mounted WIM will be accessible regardless of whether there is a
security descriptor in the WIM associated with the file or not. New files or
directories created in a read-write mounted WIM will be created with no security
\fB--streams-interface\fR option), it is currently not possible
to set or get DOS names, file attributes, or security
descriptors in a mounted WIM.
-
+.PP
By default, changes to a read-write WIM are made in-place by appending to the
-WIM. This is ideal for big WIM files, since the entire file doesn't have to be
+WIM. This is nice for big WIM files, since the entire file doesn't have to be
rebuilt to make a small change. But, if you are making many changes to a
read-write mounted WIM, especially deleting large files, it is suggested to
-provide the \fB--rebuild\fR option to \fBimagex unmount\fR to force the WIM to
-be rebuilt, or else run \fBimagex optimize\fR on the WIM afterwards.
-
+provide the \fB--rebuild\fR option to \fB@IMAGEX_PROGNAME@ unmount\fR to force the WIM to
+be rebuilt, or else run \fB@IMAGEX_PROGNAME@ optimize\fR on the WIM afterwards.
.SH MOUNT OPTIONS
-
-.TP
+.TP 6
\fB--check\fR
When reading the WIM, verify its integrity if it contains an integrity table.
.TP
This option is inspired by the ntfs-3g filesystem driver (see \fBntfs-3g\fR
(8)). It controls how alternate data streams, or named data streams, in WIM
files are made available.
-
+.IP ""
If "none", it will be impossible to read or write the named data streams.
-
+.IP ""
If "xattr" (default), named data streams will be accessible through extended
file attributes, unless this support was disabled when compiling wimlib. The
named data streams may be accessed through extended attributes named "user.*",
where the * is the name of the named data stream. See \fBsetfattr\fR (1) and
\fBgetfattr\fR (1).
-
+.IP ""
If "windows", the named data streams will be accessible by specifying the
filename, then a colon, then the name of the named data stream; for example,
"myfile:mystream".
-
+.IP ""
Please note that named data streams are a somewhat obscure NTFS feature that
aren't actually used much, even though they complicate the WIM file format
considerably. Normally, all you care about is the default or "unnamed" data
.TP
\fB--ref\fR="\fIGLOB\fR"
File glob of additional split WIM parts that are part of the split WIM being
-mounted. This option is valid for \fBimagex mount\fR but not \fBimagex
+mounted. This option is valid for \fB@IMAGEX_PROGNAME@ mount\fR but not \fB@IMAGEX_PROGNAME@
mountrw\fR. See \fBSPLIT_WIMS\fR.
.TP
\fB--staging-dir\fR=\fIDIR\fR
-Store temporary staging files in the directory \fIDIR\fR. Only valid for
-\fBimagex mountrw\fR.
-
+Store temporary staging files in a subdirectory of the directory \fIDIR\fR.
+Only valid for \fB@IMAGEX_PROGNAME@ mountrw\fR.
+.TP
+\fB--unix-data\fR
+By default, \fB@IMAGEX_PROGNAME@ mount\fR and \fB@IMAGEX_PROGNAME@ mountrw\fR will ignore both
+Windows-style security descriptors (which may have been set either from Windows or by
+\fB@IMAGEX_PROGNAME@ capture\fR from a NTFS-volume) and UNIX-specific data (which is from using
+\fB@IMAGEX_PROGNAME@ capture\fR with the \fB--unix-data\fR flag). In this default mode,
+all files will simply be owned by the user running \fB@IMAGEX_PROGNAME@\fR and will have mode 0777.
+(Note: they will still not be accessible to other users unless you also specify
+\fB--allow-other\fR.) If you instead provide the \fB--unix-data\fR flag, these
+default permissions will be overridden on a per-file basis with the
+UNIX-specific data when available, and in the case of \fB@IMAGEX_PROGNAME@ mountrw\fR it
+will be possible to change the UNIX permissions using the standard UNIX
+tools and functions.
+.TP
+\fB--allow-other\fR
+Pass the \fBallow_other\fR option to the FUSE mount. See \fBmount.fuse\fR (8).
+Note: to do this is a non-root user, \fBuser_allow_other\fR needs to be
+specified in /etc/fuse.conf (with the FUSE implementation on Linux, at least).
.SH UNMOUNT OPTIONS
-
.TP
\fB--commit\fR
Update the WIM file with the changes that have been made. Has no effect if the
.TP
\fB--check\fR
When writing \fIWIMFILE\fR, include an integrity table. Has no effect if the
-mount is read-only or if --commit was not specified.
+mount is read-only or if \fB--commit\fR was not specified.
.TP
\fB--rebuild\fR
Rebuild the entire WIM rather than appending any new data to the end of it.
Rebuilding the WIM is slower, but will save a little bit of space that would
otherwise be left as a hole in the WIM. Even more space will be saved if the
read-write mount resulted in streams being deleted from the WIM. Also see
-\fBimagex optimize\fR. Has no effect if the mount is read-only or if --commit
-was not specified.
-
+.TP
+\fB--lazy\fR
+Pass the \fB-z\fR option to \fBfusermount\fR, which performs a "lazy" unmount
+where the filesystem is detached immediately even if it is still busy. However,
+even with this option, \fB@IMAGEX_PROGNAME@ unmount\fR still waits for the
+filesystem to become unbusy; \fB--lazy\fR will only stop the unmount from
+immediately failing.
.SH IMPLEMENTATION DETAILS
-
-Since a WIM is an archive and not a filesystem, \fBimagex mountrw\fR creates a
+Since a WIM is an archive and not a filesystem, \fB@IMAGEX_PROGNAME@ mountrw\fR creates a
temporary staging directory to contain files that are created or modified. This
directory is located in the same directory as \fIWIMFILE\fR by default, but the
location can be set using the \fB--staging-dir\fR option. When the filesystem
-is unmounted with \fB--commit\fR, the WIM is rebuilt, merging in the staging
-files as needed. Then, the temporary staging directory is deleted.
-
-\fBimagex unmount\fR executes the \fBfusermount\fR (1) program, which should be
-installed as part of libfuse, to unmount the filesystem. It then uses a POSIX
-message queue (see \fBmq_overview\fR (7)) to communicate with the filesystem
-daemon (the instance of \fBimagex\fR that has mounted the WIM image) so that it
-can know whether whether changes are to be committed and whether an integrity
-table is to be included. A message is then sent from the filesystem daemon to
-unmounting process when the unmounting has been completed, and this message
-indicates whether the unmounting was successful or not.
-
-If the filesystem daemon has crashed or been killed, is possible for \fBimagex
-unmount\fR to wait a very long time before timing out. A solution to this
-problem may be implemented in the future.
-
+is unmounted with \fB--commit\fR, the WIM is modified in-place (or rebuild
+completely with \fB--rebuild\fR), merging in the staging files as needed. Then,
+the temporary staging directory is deleted.
+.PP
+\fB@IMAGEX_PROGNAME@ unmount\fR runs in a separate process from the process that previously
+ran \fB@IMAGEX_PROGNAME@ mount\fR, and these two processes communicate using POSIX message
+queues. See \fIsrc/mount_image.c\fR in the sources for details. Note: As of
+wimlib v1.2.1, \fB@IMAGEX_PROGNAME@ unmount\fR correctly fails with an error within a
+reasonable amount of time (1 second) if the filesystem daemon is abnormally
+terminated.
.SH SEE ALSO
-.BR imagex (1)
-
+.BR @IMAGEX_PROGNAME@ (1)
git://wimlib.net / wimlib / blobdiff