+++ /dev/null
-# Makefile.in generated by automake 1.12 from Makefile.am.
-# doc/Makefile. Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/wimlib
-pkgincludedir = $(includedir)/wimlib
-pkglibdir = $(libdir)/wimlib
-pkglibexecdir = $(libexecdir)/wimlib
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-subdir = doc
-DIST_COMMON = $(dist_man1_MANS) $(srcdir)/Doxyfile.in \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_prog_nasm.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
- $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = Doxyfile
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-am__installdirs = "$(DESTDIR)$(man1dir)"
-NROFF = nroff
-MANS = $(dist_man1_MANS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/e/tmp/wimlib-code/missing --run aclocal-1.12
-AMTAR = $${TAR-tar}
-AR = ar
-AUTOCONF = ${SHELL} /home/e/tmp/wimlib-code/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/e/tmp/wimlib-code/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/e/tmp/wimlib-code/missing --run automake-1.12
-AWK = gawk
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS =
-CYGPATH_W = echo
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-DLLTOOL = false
-DSYMUTIL =
-DUMPBIN =
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = /usr/bin/grep -E
-EXEEXT =
-FGREP = /usr/bin/grep -F
-GREP = /usr/bin/grep
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LD = /usr/bin/ld -m elf_x86_64
-LDFLAGS =
-LIBCRYPTO_CFLAGS =
-LIBCRYPTO_LDADD = -lcrypto
-LIBFUSE_CFLAGS = -D_FILE_OFFSET_BITS=64 -I/usr/include/fuse
-LIBFUSE_LDADD = -lfuse
-LIBICONV =
-LIBOBJS =
-LIBS =
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LIBXML2_CFLAGS = -I/usr/include/libxml2
-LIBXML2_LDADD = -lxml2
-LIPO =
-LN_S = ln -s
-LTLIBICONV =
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /home/e/tmp/wimlib-code/missing --run makeinfo
-MANIFEST_TOOL = :
-MKDIR_P = /bin/mkdir -p
-NASM =
-NM = /usr/bin/nm -B
-NMEDIT =
-OBJDUMP = objdump
-OBJEXT = o
-OTOOL =
-OTOOL64 =
-PACKAGE = wimlib
-PACKAGE_BUGREPORT = ebiggers3@gmail.com
-PACKAGE_NAME = wimlib
-PACKAGE_STRING = wimlib 0.6.2
-PACKAGE_TARNAME = wimlib
-PACKAGE_URL =
-PACKAGE_VERSION = 0.6.2
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SED = /bin/sed
-SET_MAKE =
-SHA1_SOURCES =
-SHELL = /bin/sh
-SSSE3_SHA1_OBJ =
-STRIP = strip
-VERSION = 0.6.2
-abs_builddir = /home/e/tmp/wimlib-code/doc
-abs_srcdir = /home/e/tmp/wimlib-code/doc
-abs_top_builddir = /home/e/tmp/wimlib-code
-abs_top_srcdir = /home/e/tmp/wimlib-code
-ac_ct_AR = ar
-ac_ct_CC = gcc
-ac_ct_DUMPBIN =
-am__include = include
-am__leading_dot = .
-am__quote =
-am__tar = $${TAR-tar} chof - "$$tardir"
-am__untar = $${TAR-tar} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias =
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias =
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = ${SHELL} /home/e/tmp/wimlib-code/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-nasm =
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target_alias =
-top_build_prefix = ../
-top_builddir = ..
-top_srcdir = ..
-dist_man1_MANS = imagex.1 \
- imagex-append.1 \
- imagex-apply.1 \
- imagex-capture.1 \
- imagex-delete.1 \
- imagex-dir.1 \
- imagex-export.1 \
- imagex-info.1 \
- imagex-mount.1 \
- imagex-mountrw.1 \
- imagex-unmount.1 \
- mkwinpeimg.1
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man1: $(dist_man1_MANS)
- @$(NORMAL_INSTALL)
- @list1='$(dist_man1_MANS)'; \
- list2=''; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- uninstall uninstall-am uninstall-man uninstall-man1
-
-
-EXTRA_DIST:Doxyfile.in
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
git://wimlib.net / wimlib / blobdiff