INTRODUCTION
-This is wimlib version 1.5.3 (December 2013). wimlib is a C library for
+This is wimlib version 1.11.0 (January 2017). wimlib is a C library for
creating, modifying, extracting, and mounting files in the Windows Imaging
-Format (WIM files). These files are normally created using the ImageX
-(imagex.exe) or Dism (Dism.exe) utilities on Windows, but wimlib is distributed
-with a free implementation of ImageX called "wimlib-imagex" for both UNIX-like
-systems and Windows.
+Format (WIM files). wimlib and its command-line frontend 'wimlib-imagex'
+provide a free and cross-platform alternative to Microsoft's WIMGAPI, ImageX,
+and DISM.
INSTALLATION
-To install wimlib and wimlib-imagex on Windows you simply need to download and
-extract the ZIP file containing the latest binaries from the SourceForge page
-(http://sourceforge.net/projects/wimlib/), which you may have already done.
-
-To install wimlib and wimlib-imagex on UNIX-like systems (with Linux being the
-primary supported and tested platform), you must compile the source code, which
-is also available at http://sourceforge.net/projects/wimlib/. Alternatively,
-check if a package has been prepared for your Linux distribution. Example files
+To install wimlib and wimlib-imagex on UNIX-like systems, you can compile from
+source (e.g. './configure && make && sudo make install'). Alternatively, check
+if a package has already been prepared for your operating system. Example files
for Debian and RPM packaging are in the debian/ and rpm/ directories.
- WIM FILES
+To install wimlib and wimlib-imagex on Windows, just download and extract the
+ZIP file containing the latest binaries. See README.WINDOWS for more details.
+
+All official wimlib releases are available from https://wimlib.net.
+
+ WIM FILES
A Windows Imaging (WIM) file is an archive designed primarily for archiving
Windows filesystems. However, it can be used on other platforms as well, with
some limitations. Like some other archive formats such as ZIP, files in WIM
-archives may be compressed. WIM files support multiple compression formats,
+archives may be compressed. WIM archives support multiple compression formats,
including LZX, XPRESS, and LZMS. All these formats are supported by wimlib.
-A WIM file consists of one or more "images". Each image is an independent
-top-level directory structure and is logically separate from all other images in
-the WIM. Each image has a name as well as a 1-based index in the WIM file. To
-save space, WIM archives automatically combine all duplicate files across all
-images.
+A WIM archive contains one or more "images", each of which is a logically
+independent directory tree. Each image has a 1-based index and usually a name.
-A WIM file may be either stand-alone or split into multiple parts. Split WIMs
-are read-only and cannot be modified.
+WIM archives provide data deduplication at the level of full file contents. In
+other words, each unique "file contents" is only stored once in the archive,
+regardless of how many files have that contents across all images.
+
+A WIM archive may be either stand-alone or split into multiple parts.
+
+An update of the WIM format --- first added by Microsoft for Windows 8 ---
+supports solid-mode compression. This refers to files being compressed together
+(e.g. as in a .tar.xz or .7z archive) rather than separately (e.g. as in a .zip
+archive). This usually produces a much better compression ratio. Solid
+archives are sometimes called "ESD files" by Microsoft and may have the ".esd"
+file extension rather than ".wim". They are supported in wimlib since v1.6.0.
IMAGEX IMPLEMENTATION
wimlib itself is a C library, and it provides a documented public API (See:
-http://wimlib.sourceforge.net) for other programs to use. However, it is also
+https://wimlib.net/apidoc) for other programs to use. However, it is also
distributed with a command-line program called "wimlib-imagex" that uses this
library to implement an imaging tool similar to Microsoft's ImageX.
wimlib-imagex supports almost all the capabilities of Microsoft's ImageX as well
Windows, although some features differ between the platforms.
Run `wimlib-imagex' with no arguments to see an overview of the available
-commands and their syntax. For additional documentation:
+commands and their syntax. Note that the commands have both long and short
+forms, e.g. `wimlib-imagex apply' is equivalent to `wimapply'. For additional
+documentation:
* If you have installed wimlib-imagex on a UNIX-like system, you will find
further documentation in the man pages; run `man wimlib-imagex' to get
started.
* If you have downloaded the Windows binary distribution, you will find the
- documentation for wimlib-imagex in PDF format in the "doc" directory,
- ready for viewing with any PDF viewer. Please note that although the PDF
- files are converted from UNIX-style "man pages", they do document
- Windows-specific behavior when appropriate.
-
- COMPRESSION RATIO
-
-wimlib (and wimlib-imagex) can create XPRESS, LZX, or LZMS compressed WIM archives.
-The following tables compare the compression ratio and performance for creating
-a compressed x86_64 Windows PE image. Note: these timings were done on Windows
-so that the times would be fully comparable; however, wimlib may have even
-better performance on other operating systems such as Linux. Timings were done
-with 2 CPUs available, both of which automatically are used by wimlib for both
-XPRESS and LZX, and also by imagex.exe but apparently only for LZX. Results for
-LZMS compression are excluded because the creation of LZMS compressed WIM
-archives is not yet recommended.
-
- Table 1. WIM size
-
- XPRESS Compression LZX Compression
- wimlib-imagex (v1.5.3): 207,444,390 bytes 188,106,091 bytes
- Microsoft imagex.exe (Windows 7): 209,960,209 bytes 188,224,481 bytes
-
- Table 2. Time to create WIM
-
- XPRESS Compression LZX Compression
- wimlib-imagex (v1.5.3): 73 sec 202 sec
- Microsoft imagex.exe (Windows 7): 90 sec 149 sec
-
-The above LZX data are using explicitly specified maximum compression
-('--compress=maximum') as of wimlib v1.5.3. If `wimlib-imagex capture' or
-`wimlib-imagex capture' is instead run with no '--compress' argument, then a
-faster LZX compressor is used; it will produce results in between those given
-for XPRESS and LZX above.
-
-Note: if the absolute maximum (but still compatible; i.e. not changing the
-compression chunk size) LZX compression ratio is desired, `wimlib-imagex
-optimize WIMFILE --recompress --compress-slow' on one of the above
-LZX-compressed WIMs produces a WIM of 187,089,943 bytes in about 400 seconds.
+ documentation for wimlib-imagex in PDF format in the "doc" directory. Note
+ that although the documentation is written in the style of UNIX manual
+ pages, it does document Windows-specific behavior when relevant.
+
+ COMPRESSION
+
+wimlib (and wimlib-imagex) can create XPRESS, LZX, and LZMS compressed WIM
+archives. wimlib's compression codecs usually outperform and outcompress their
+closed-source Microsoft equivalents. Multiple compression levels and chunk
+sizes as well as solid mode compression are supported. Compression is
+multithreaded by default. Detailed benchmark results and descriptions of the
+algorithms used can be found at https://wimlib.net/compression.html.
NTFS SUPPORT
-WIM images may contain data, such as alternate data streams and
+WIM images may contain data, such as named data streams and
compression/encryption flags, that are best represented on the NTFS filesystem
used on Windows. Also, WIM images may contain security descriptors which are
specific to Windows and cannot be represented on other operating systems.
Windows-specific data are ordinarily ignored; however, there is also special
support for capturing and extracting images directly to/from unmounted NTFS
volumes. This was made possible with the help of libntfs-3g from the
- NTFS-3g project.
+ NTFS-3G project.
For both platforms the code for NTFS capture and extraction is complete enough
that it is possible to apply an image from the "install.wim" contained in recent
-Windows installation media (Vista, Windows 7, or Windows 8) directly to a NTFS
-filesystem, and then boot Windows from it after preparing the Boot Configuration
-Data. In addition, a Windows installation can be captured (or backed up) into a
-WIM file, and then re-applied later.
+Windows installation media (Vista or later) directly to an NTFS filesystem, and
+then boot Windows from it after preparing the Boot Configuration Data. In
+addition, a Windows installation can be captured (or backed up) into a WIM file,
+and then re-applied later.
WINDOWS PE
-A major use for wimlib and wimlib-imagex is to create customized images of
-Windows PE, the Windows Preinstallation Environment, on either UNIX-like systems
-or Windows without having to rely on Microsoft's software and its restrictions
-and limitations.
-
-Windows PE is a lightweight version of Windows that can run entirely from memory
-and can be used to install Windows from local media or a network drive or
-perform maintenance. It is the operating system that runs when you boot from
-the Windows installation media.
-
-You can find Windows PE on the installation DVD for Windows Vista, Windows 7, or
-Windows 8, in the file `sources/boot.wim'. Windows PE can also be found in the
-Windows Automated Installation Kit (WAIK), which is free to download from
-Microsoft, inside the `WinPE.cab' file, which you can extract natively on
-Windows, or on UNIX-like systems if you install either the `cabextract' or
-`p7zip' programs.
+wimlib can also be used to create customized images of Windows PE on either
+UNIX-like systems or Windows. Windows PE (Preinstallation Environment) is a
+lightweight version of Windows that runs entirely from memory and can be used to
+perform maintenance or to install Windows. It is the operating system that runs
+when you boot from the Windows installation media.
-In addition, Windows installations and recovery partitions frequently contain a
-WIM containing an image of the Windows Recovery Environment, which is similar to
-Windows PE.
+A copy of Windows PE can be found on the installation media for Windows (Vista
+or later) as the file `sources/boot.wim', or in the Windows Automated
+Installation Kit (WAIK), which is free to download from Microsoft.
-A shell script `mkwinpeimg' is distributed with wimlib on UNIX-like systems to
-ease the process of creating and customizing a bootable Windows PE image.
+A shell script `mkwinpeimg' is provided with wimlib on UNIX-like systems to
+simplify the process of creating and customizing a bootable Windows PE image,
+sourcing the needed files from the Windows installation media or from the WAIK.
DEPENDENCIES
dependencies were already included and this section is irrelevant.
* libxml2 (required)
- This is a commonly used free library to read and write XML files. You
- likely already have it installed as a dependency for some other program.
- For more information see http://xmlsoft.org/.
-
-* libfuse (optional but highly recommended)
- Unless configured with --without-fuse, wimlib requires a non-ancient
- version of libfuse to be installed. Most Linux distributions already
- include this, but make sure you have the libfuse package installed, and
- also libfuse-dev if your distribution distributes header files
- separately. FUSE also requires a kernel module. If the kernel module
- is available it will automatically be loaded if you try to mount a WIM
- file. For more information see http://fuse.sourceforge.net/. FUSE is
- also available for FreeBSD.
-
-* libntfs-3g (optional but highly recommended)
- Unless configured with --without-ntfs-3g, wimlib requires the library
- and headers for libntfs-3g version 2011-4-12 or later to be installed.
- Versions dated 2010-3-6 and earlier do not work because they are missing
- the header xattrs.h (and the file xattrs.c, which contains functions we
- need). libntfs-3g version 2013-1-13 is compatible only with wimlib
- 1.2.4 and later.
+ This is a commonly used free library to read and write XML documents.
+ Almost all Linux distributions should include this; however, you may
+ need to install the header files, which might be in a package named
+ "libxml2-dev" or similar. For more information see http://xmlsoft.org/.
+
+* libfuse (optional but recommended)
+ Unless configured --without-fuse, wimlib requires a non-ancient version
+ of libfuse. Most Linux distributions already include this, but make
+ sure you have the libfuse package installed, and also libfuse-dev if
+ your distribution distributes header files separately. FUSE also
+ requires a kernel module. If the kernel module is available it should
+ automatically be loaded if you try to mount a WIM image. For more
+ information see http://fuse.sourceforge.net/.
+
+* libntfs-3g (optional but recommended)
+ Unless configured --without-ntfs-3g, wimlib requires the library and
+ headers for libntfs-3g to be installed. The minimum required version is
+ 2011-4-12, but newer versions contain important bug fixes.
* OpenSSL / libcrypto (optional)
- wimlib can use the SHA1 message digest code from OpenSSL instead of
- compiling in yet another SHA1 implementation. (See LICENSE section.)
+ wimlib can use the SHA-1 message digest implementation from libcrypto
+ (usually provided by OpenSSL) instead of compiling in yet another SHA-1
+ implementation.
* cdrkit (optional)
* mtools (optional)
--without-ntfs-3g
If libntfs-3g is not available or is not version 2011-4-12 or later,
wimlib can be built without it, in which case it will not be possible to
- apply or capture images directly to/from NTFS volumes.
-
---without-fuse
- If libfuse or the FUSE kernel module is not available, wimlib can be
- compiled with --without-fuse. This will remove the ability to mount and
- unmount WIM files.
-
---without-libcrypto
- Build in functions for SHA1 rather than using external SHA1 functions
- from libcrypto (part of OpenSSL). The default is to use libcrypto if it
- is found on the system.
+ capture or apply WIM images directly from/to NTFS volumes.
---enable-xattr, --disable-xattr
- Enable or disable support for the extended-attributes interface to NTFS
- alternate data streams in mounted WIMs. To support these, wimlib
- requires that the setxattr() function and the attr/xattr.h header are
- available. The default is to autodetect whether support is possible.
+ The default is --with-ntfs-3g when building for any UNIX-like system,
+ and --without-ntfs-3g when building for Windows.
---disable-multithreaded-compression
- By default, data will be compressed using multiple threads when writing
- a WIM, unless only 1 processor is detected. Specify this option to
- disable support for this.
+--without-fuse
+ The --without-fuse option disables support for mounting WIM images.
+ This removes dependencies on libfuse and librt. The wimmount,
+ wimmountrw, and wimunmount commands will not work.
---enable-ssse3-sha1
- Use a very fast assembly language implementation of SHA1 from Intel.
- Only use this if the build target supports the SSSE3 instructions.
+ The default is --with-fuse when building for Linux, and --without-fuse
+ otherwise.
---disable-error-messages
- Save some space by removing all error messages from the library.
+--without-libcrypto
+ Build in functions for SHA-1 rather than using external SHA-1 functions
+ from libcrypto (usually provided by OpenSSL).
---disable-assertions
- Remove assertions included by default.
+ The default is to use libcrypto if it is found on your system.
PORTABILITY
-wimlib has primarily been tested on Linux and Windows (primarily Windows 7, but
-also Windows XP and Windows 8).
+wimlib works on both UNIX-like systems (Linux, Mac OS X, FreeBSD, etc.) and
+Windows (XP and later).
-wimlib may work on FreeBSD and Mac OS X. However, this is not well tested. If
-you do not have libntfs-3g 2011-4-12 or later available, you must configure
-wimlib with --without-ntfs-3g. On FreeBSD, before mounting a WIM you need to
-load the POSIX message queue module (run `kldload mqueuefs').
+As much code as possible is shared among all supported platforms, but there
+necessarily are some differences in what features are supported on each platform
+and how they are implemented. Most notable is that file tree scanning and
+extraction are implemented separately for Windows, UNIX, and UNIX (NTFS-3G
+mode), to ensure a fast and feature-rich implementation of each platform/mode.
-The code has primarily been tested on x86 and x86_64 CPUs, but it's written to
-be portable to other architectures and I've also tested it on ARM. However,
-although the code is written to correctly deal with endianness, it has not yet
-actually been tested on a big-endian architecture.
+wimlib is mainly used on x86 and x86_64 CPUs, but it should also work on a
+number of other GCC-supported 32-bit or 64-bit architectures. It has been
+tested on the ARM and MIPS architectures.
+
+Currently, gcc and clang are the only supported compilers. A few nonstandard
+extensions are used in the code.
REFERENCES
The WIM file format is partially specified in a document that can be found in
the Microsoft Download Center. However, this document really only provides an
-overview of the format and is not a formal specification.
+overview of the format and is not a formal specification. It also does not
+cover later extensions of the format, such as solid resources.
With regards to the supported compression formats:
- Microsoft has official documentation for XPRESS that is of reasonable quality.
-- Microsoft has official documentation for LZX but it contains errors.
+- Microsoft has official documentation for LZX, but in two different documents,
+ neither of which is completely applicable to its use in the WIM format, and
+ the first of which contains multiple errors.
- There does not seem to be any official documentation for LZMS, so my comments
- and code in src/lzms-decompress.c may in fact be the best documentation
+ and code in src/lzms_decompress.c may in fact be the best documentation
available for this particular compression format.
-The code in ntfs-3g_apply.c and ntfs-3g_capture.c uses the NTFS-3g library,
+The algorithms used by wimlib's compression and decompression codecs are
+inspired by a variety of sources, including open source projects and computer
+science papers.
+
+The code in ntfs-3g_apply.c and ntfs-3g_capture.c uses the NTFS-3G library,
which is a library for reading and writing to NTFS filesystems (the filesystem
used by recent versions of Windows). See
-http://www.tuxera.com/community/ntfs-3g-download/ for more information.
-
-The LZX decompressor (lzx-decompress.c) was originally based on code from the
-cabextract project (http://www.cabextract.org.uk) but has been rewritten.
-
-The LZX compressor (lzx-compress.c) was originally based on code written by
-Matthew Russotto (www.russotto.net/chm/) but has been rewritten. It now uses
-suffix array construction code from divsufsort
-(https://code.google.com/p/libdivsufsort/) and algorithms from 7-Zip as well as
-several published papers.
-
-lz77.c contains a hash-table-based LZ77 matchfinder that is based on code from
-zlib but has been rewritten. This code is applicable to XPRESS, LZX, and LZMS,
-all of which are partly based on LZ77 compression.
+http://www.tuxera.com/community/open-source-ntfs-3g/ for more information.
A limited number of other free programs can handle some parts of the WIM
file format:
- * 7-zip is able to extract and create WIMs (as well as files in many
+ * 7-Zip is able to extract and create WIMs (as well as files in many
other archive formats). However, wimlib is designed specifically to handle
WIM files and provides features previously only available in Microsoft's
implementation, such as the ability to mount WIMs read-write as well as
- read-only, the ability to create LZX or XPRESS compressed WIMs, and the
- correct handling of security descriptors and hard links.
+ read-only, the ability to create compressed WIMs, the correct handling of
+ security descriptors and hard links, support for LZMS compression, and
+ support for solid archives.
* ImagePyX (https://github.com/maxpat78/ImagePyX) is a Python program that
- provides similar capabilities to wimlib-imagex. One thing to note, though,
- is that it does not support compression and decompression by itself, but
- instead relies on external native code, such as the codecs from wimlib.
+ provides some capabilities of wimlib-imagex, with the help of external
+ compression codecs.
+
+If you are looking for an archive format that provides features similar to WIM
+but was designed primarily for UNIX, you may want to consider SquashFS
+(http://squashfs.sourceforge.net/). However, you may find that wimlib works
+surprisingly well on UNIX. It will store hard links and symbolic links, and it
+supports storing standard UNIX file permissions (owners, groups, and modes);
+special files such as device nodes and FIFOs; and extended attributes.
+Actually, I use it to back up my own files on Linux!
-A very early version of wimlib is being used to deploy Windows 7 from the
-Ultimate Deployment Appliance. For more information see
-http://www.ultimatedeployment.org/.
+ HISTORY
-If you are looking for a UNIX archive format that provides features similar to
-WIM, I recommend you take a look at SquashFS (http://squashfs.sourceforge.net/).
+wimlib was originally a project started by Carl Thijssen for use on Linux in the
+Ultimate Deployment Appliance (http://www.ultimatedeployment.org/). Since then
+the code has been entirely rewritten and improved (main author: Eric Biggers).
+Windows support has been available since version 1.3.0 (March 2013). A list of
+version-to-version changes can be found in the NEWS file.
- LICENSE
+ NOTICES
-As of version 1.0.0, wimlib and all programs and scripts distributed with it are
-released under the GNU GPL version 3.0 or later.
+wimlib is free software that comes with NO WARRANTY, to the extent permitted by
+law. See the COPYING file for more details.
+
+Bug reports, suggestions, and other contributions are appreciated and may be
+sent via email to ebiggers3@gmail.com or posted to https://wimlib.net/forums.
wimlib is independently developed and does not contain any code, data, or files
copyrighted by Microsoft. It is not known to be affected by any patents.
implementation with built-in code and there will be no difference in
functionality.
- DISCLAIMER
-
-wimlib comes with no warranty whatsoever. Please submit a bug report (to
-ebiggers3@gmail.com) if you find a bug in wimlib and/or wimlib-imagex.
-
-Be aware that some parts of the WIM file format are poorly documented or even
-completely undocumented, so I've just had to do the best I can to read and write
-WIMs that appear to be compatible with Microsoft's software.
+Note: copyright years may be listed using range notation, e.g., 2012-2016,
+indicating that every year in the range, inclusive, is a copyrightable year that
+would otherwise be listed individually.
git://wimlib.net / wimlib / blobdiff