+++ /dev/null
- WIMLIB
-
-This is wimlib version 1.0.3 (September 2012). wimlib can be used to read,
-write, and mount files in the Windows Imaging Format (WIM files). These
-files are normally created by using the `imagex.exe' utility on Windows,
-but this library provides a free implementation of imagex for UNIX-based
-systems.
-
- WIM FILES
-
-A Windows Imaging (WIM) file is an archive. Like some other archive formats
-such as ZIP, files in WIM archives may be compressed. WIM archives support two
-Microsoft-specific compression formats: LZX and XPRESS. Both are based on LZ77
-and Huffman encoding, and both are supported by wimlib.
-
-Unlike ZIP files, WIM files can contain multiple independent toplevel directory
-trees known as images. While each image has its own metadata describing a
-directory tree and file access modes, files are not duplicated for each image;
-instead, each file is included only once in the entire WIM. Microsoft did this
-so that in one WIM file, they could do things like have 5 different versions of
-Windows that are almost exactly the same.
-
-Microsoft provides documentation for the WIM file format, XPRESS compression
-format, and LZX compression format. The XPRESS documentation is acceptable, but
-the LZX documentation is not entirely correct, and the WIM documentation itself
-is very incomplete and is of unacceptable quality.
-
-A WIM file may be either stand-alone or split into multiple parts.
-
- WINDOWS PE
-
-A major use for this library is to create customized images of Windows PE, the
-Windows Preinstallation Environment, without having to rely on Windows. Windows
-PE is a lightweight version of Windows that can run entirely from memory and can
-be used to install Windows from local media or a network drive or perform
-maintenance. Windows PE is the operating system that runs when you boot from
-the Windows installation media.
-
-You can find Windows PE on the installation DVD for Windows Vista, Windows 7, or
-Windows 8, in the file `sources/boot.wim'. Windows PE can also be found in the
-Windows Automated Installation Kit (WAIK), which is free to download from
-Microsoft, inside the `WinPE.cab' file, which you can extract if you install
-either the `cabextract' or `p7zip' programs.
-
-In addition, Windows installations and recovery partitions frequently contain a
-WIM containing an image of the Windows Recovery Environment, which is similar to
-Windows PE.
-
- NTFS SUPPORT
-
-As of version 1.0.0, wimlib supports capturing and applying images directly to
-NTFS volumes. This was made possible with the help of libntfs-3g from the
-NTFS-3g project. This feature supports capturing and restoring NTFS-specific
-data such as security descriptors, alternate data streams, and reparse point
-data.
-
-The code for NTFS image capture and image application is complete enough that it
-is possible to apply an image from the "install.wim" contained in recent Windows
-installation media (Vista, Windows 7, or Windows 8) directly to a NTFS volume,
-and then boot Windows from it after preparing the Boot Configuration Data. In
-addition, a Windows installation can be captured (or backed up) into a WIM file,
-and then re-applied later.
-
- PROGRAMS
-
-wimlib provides a public API for other programs to use, but also comes with two
-programs: `imagex' and `mkwinpeimg'.
-
-`imagex' is intended to be like the imagex.exe program from Windows. `imagex'
-can be used to create, extract, and mount WIM files. Both read-only and
-read-write mounts are supported. See the man page `doc/imagex.1' for more
-details.
-
-`mkwinpeimg' is shell script that makes it easy to create a customized bootable
-image of Windows PE that can be put on a CD or USB drive, or published on a
-server for PXE booting. See the main page `doc/mkwinpeiso.1' for more details.
-
- COMPRESSION RATIO
-
-wimlib can create XPRESS or LZX compressed WIM archives. As of wimlib v1.0.3,
-the XPRESS compression ratio is slightly better than that provided by
-Microsoft's software, while the LZX compression ratio is approaching that of
-Microsoft's software but is not quite there yet. Running time is as good as or
-better than Microsoft's software.
-
-The following tables compare the compression ratio and performance for creating
-a compressed Windows PE image (disk usage of about 524 MB, uncompressed WIM size
-361 MB):
-
- Table 1. WIM size
-
- XPRESS Compression LZX Compression
- wimlib imagex (v1.0.2): 145,283,871 bytes 139,288,293 bytes
- wimlib imagex (v1.0.3): 139,288,293 bytes 131,379,869 bytes
- Microsoft imagex.exe: 140,406,981 bytes 127,249,176 bytes
-
- Table 2. Time to create WIM
-
- XPRESS Compression LZX Compression
- wimlib imagex (v1.0.2): 18 sec 49 sec
- wimlib imagex (v1.0.3): 19 sec 30 sec
- Microsoft imagex.exe: 25 sec 89 sec
-
-
- DEPENDENCIES
-
-* libxml2
- This is a commonly used free library to read and write XML files. You
- likely already have it installed as a dependency for some other program.
- For more information see http://xmlsoft.org/.
-
-* libfuse
- Unless configured with --without-fuse, wimlib requires a non-ancient
- version of libfuse to be installed. Most GNU/Linux distributions
- already include this, but make sure you have the libfuse package
- installed, and also libfuse-dev if your distribution distributes header
- files separately. FUSE also requires a kernel module. If the kernel
- module is available it will automatically be loaded if you try to mount
- a WIM file. For more information see http://fuse.sourceforge.net/.
- FUSE is also available for FreeBSD.
-
-* libntfs-3g
- Unless configured with --without-ntfs-3g, wimlib requires the library
- and headers for libntfs-3g version 2011-4-12 or later to be installed.
- Versions dated 2010-3-6 and earlier do not work because they are missing
- the header xattrs.h (and the file xattrs.c, which contains functions we
- need).
-
-* cdrkit (optional)
-* mtools (optional)
-* syslinux (optional)
-* cabextract (optional)
- The `mkwinpeimg' shell script will look for several other programs
- depending on what options are given to it. Depending on your GNU/Linux
- distribution, you may already have these programs installed, or they may
- be in the software repository. Making an ISO filesystem requires
- `mkisofs' from `cdrkit' (http://www.cdrkit.org). Making a disk image
- requires `mtools' (http://www.gnu.org/software/mtools) and `syslinux'
- (http://www.syslinux.org). Retrieving files from the Windows Automated
- Installation Kit requires `cabextract' (http://www.cabextract.org.uk).
-
-
- CONFIGURATION
-
-Besides the various well-known options, the following options can be passed to
-wimlib's `configure' script:
-
---without-ntfs-3g
- If libntfs-3g is not available or is not the correct version, we can
- build without it. wimlib will then not be able to apply or capture
- images directly to NTFS volumes.
-
---without-fuse
- If libfuse or the FUSE kernel module is not available, wimlib can be
- compiled with --without-fuse. This will remove the ability to mount and
- unmount WIM files. wimlib_mount() and wimlib_unmount() will fail with
- WIMLIB_ERR_UNSUPPORTED.
-
---without-libcrypto
- Build in functions for SHA1 rather than using external SHA1 functions
- from libcrypto (part of OpenSSL). The default is to use libcrypto if it
- is found on the system.
-
---enable-xattr, --disable-xattr
- Enable or disable support for the extended-attributes interface to NTFS
- alternate data streams in mounted WIMs. To support these, we require
- the setxattr() function and the attr/xattr.h header be available. The
- default is to autodetect whether support is possible.
-
---enable-ssse3-sha1
- Use a very fast assembly language implementation of SHA1 from Intel.
- Only use this if the build target supports the SSSE3 instructions.
-
---disable-custom-memory-allocator
- If this option is given, MALLOC(), FREE(), CALLOC(), and STRDUP() will
- directly call the appropriate functions in the C library.
- wimlib_set_memory_allocator() will fail with WIMLIB_ERR_UNSUPPORTED.
-
---disable-verify-compression
- Unless this option is given, every time wimlib compresses a data block
- it will decompress it into a temporary buffer and abort() the program
- with an error message if the decompressed data does not exactly match
- the original data. This is to find bugs.
-
---disable-error-messages
- Removes all error messages from the library. If left in, they still
- have to explicitly turned on with wimlib_set_print_errors() in order to
- see them. Also, error codes will still be returned regardless of
- whether error messages are printed or not.
-
- If --disable-error-messages is given, wimlib_set_print_errors() will
- fail with WIMLIB_ERR_UNSUPPORTED if the action is to turn error messages
- on.
-
---disable-assertions
- Remove all assertions. Without this option, wimlib will abort() the
- program if an assertion fails. An assertion failure should only occur
- if there is a bug in wimlib.
-
---enable-debug
- Include debugging messages. Only use this option if you have found a
- bug in the library.
-
---enable-more-debug
- Include more debugging messages. Only use this option if you have found
- a bug in the library.
-
- PORTABILITY
-
-wimlib has mostly been developed and tested on x86_64 (64-bit) GNU/Linux.
-
-It has been tested on x86 (32-bit) GNU/Linux occasionally.
-
-wimlib may work on FreeBSD. However, this is not well tested. If you do not
-have libntfs-3g 2011-4-12 or later available, you must configure with
---without-ntfs-3g. Also, GNU coreutils is needed to run the test suite. Before
-mounting a WIM you need to load the POSIX message queue module (run `kldload
-mqueuefs').
-
-wimlib should work on big endian machines but it has not been tested.
-
-There are no plans to port wimlib to Windows since the programming interface on
-Windows is very different and Microsoft's imagex.exe is already available.
-
- REFERENCES
-
-The WIM file format is specified in a document that can be found in the
-Microsoft Download Center. There is a similar document that specifies the LZX
-compression format, and a document that specifies the XPRESS compression format.
-However, many parts of these formats are poorly documented, and some parts have
-no documentation whatsoever. Some particularly poorly documented parts of the
-formats have had comments added in various places in the library. Please see
-the code and/or ask me if you have any questions about the WIM file format as it
-exists in reality and not as it exists in Microsoft's poorly written
-documentation.
-
-The code in ntfs-apply.c and ntfs-capture.c uses the NTFS-3g library, which is a
-library for reading and writing to NTFS filesystems (the filesystem used by
-recent versions of Windows). Additionally, the code in ntfs-3g-security.c is
-mostly copied from NTFS-3g, but I'm hoping to get rid of this file eventually.
-See http://www.tuxera.com/community/ntfs-3g-download/ for more information.
-
-lzx-decomp.c, the code to decompress WIM file resources that are compressed
-using LZX compression, is originally based on code from the cabextract project
-(http://www.cabextract.org.uk).
-
-lzx-comp.c, the code to compress WIM file resources using LZX compression, is
-originally based on code written by Matthew Russotto (www.russotto.net/chm/).
-
-lz.c, the code to find LZ77 matches (used for both XPRESS and LZX compression),
-is based on code from zlib.
-
-A very limited number of other free programs can handle some parts of the WIM
-file format. 7-zip is able to extract and create WIMs (as well as files in many
-other archive formats). However, wimlib is designed specifically to handle WIM
-files and provides features previously only available in Microsoft's imagex.exe,
-such as the ability to mount WIMs read-write as well as read-only, and the
-ability to create LZX or XPRESS compressed WIMs.
-
-An earlier version of wimlib is being used to deploy Windows 7 from the Ultimate
-Deployment Appliance. For more information see
-http://www.ultimatedeployment.org/.
-
-You can see the documentation about Microsoft's version of the imagex program at
-http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx, so you can
-see how it compares.
-
- MORE INFORMATION
-
-See the manual pages for `imagex', the manual pages for the subcommands of
-`imagex', and the manual page for `mkwinpeimg'.
-
-As of version 0.5.0, wimlib's public API is documented. Doxygen is required to
-build the documentation. To build the documentation, run `configure', then
-enter the directory `doc' and run `doxygen'. The HTML documentation will be
-created in a directory named `html'.
-
- LICENSE
-
-As of version 1.0.0, wimlib is released under the GNU GPL version 3.0 or later.
-This includes the files in the `programs' directory as well as the files in the
-`src' directory.
-
-wimlib is independently developed and does not contain any code, data, or files
-copyrighted by Microsoft. It is not known to be affected by any patents.
-
- DISCLAIMER
-
-wimlib is experimental. Use Microsoft's `imagex.exe' if you want to make sure
-your WIM files are made correctly (but beware: Microsoft's version contains some
-bugs).
-
-Please submit a bug report (to ebiggers3@gmail.com) if you find a bug in wimlib.
-
-Some parts of the WIM file format are poorly documented or even completely
-undocumented, so I've just had to do the best I can to read and write WIMs that
-appear to be compatible with Microsoft's software.
git://wimlib.net / wimlib / blobdiff