+Version 1.6.3-BETA:
+ Added support for "WIMBoot". On any platform, you can now capture a WIM
+ as WIMBoot-compatible. In addition, on Windows, specifically Windows
+ 8.1 Update 1 and later, you can now apply a WIM archive in a special
+ mode that causes extracted files to be externally backed by the WIM
+ archive. See the documentation for the new '--wimboot' option to
+ wimcapture and wimapply, respectively, for more information.
+
+ The shared library version has been bumped up; however, there are only
+ a few incompatibilities:
+
+ - WIMLIB_COMPRESSION_TYPE_XPRESS is now 1 and
+ WIMLIB_COMPRESSION_TYPE_LZX is now 2 (so it's the same as
+ WIMGAPI).
+
+ - 'struct wimlib_capture_config' has been removed. The library
+ now takes the path to the configuration file directly. This
+ affects wimlib_add_image(), wimlib_add_image_multisource(),
+ and wimlib_update_image(). However no code changes are
+ necessary if a NULL configuration was being used.
+
+ - Removed deprecated functions: some (de)compression functions,
+ wimlib_extract_files(), and wimlib_print_metadata().
+
+ Otherwise the API and ABI is the same.
+
+Version 1.6.2:
+ Case-insensitive comparisons of strings (e.g. filenames) containing
+ UTF-16 codepoints above 32767 are now done correctly.
+
+ Fixed build failure on Mac OS X.
+
+ wimunmount now provides the '--new-image' option to cause changes to a
+ read-write mounted image to be committed as a new image rather than as
+ an update of the mounted image. (The corresponding new library flag is
+ WIMLIB_UNMOUNT_FLAG_NEW_IMAGE.)
+
+ The LZMS ("recovery") compression chunk size, or "dictionary size", may
+ now be up to 1 GiB (1,073,741,824 bytes).
+
+ The performance of LZX ("maximum") and LZMS ("recovery") compression
+ with large chunk sizes has been slightly improved.
+
+Version 1.6.1:
+ Stored files with size exactly 4 GiB (4,294,967,296 bytes) are now
+ decompressed correctly.
+
+ Fixed a bug in the LZX compressor introduced in v1.5.3. The bug
+ occurred in an unlikely case, and due to validity checks it did not
+ affect successfully created archives.
+
+ Fixed a minor compatibility issue with the LZMS compressor and
+ decompressor. This is *not* the default compression type and was only
+ introduced in v1.6.0. In the unlikely event that you created an
+ LZMS-compressed WIM with v1.6.0 and a checksum error is reported when
+ applying it with v1.6.1, decompress it with v1.6.0 then compress it with
+ v1.6.1.
+
+ Memory usage for LZMS and LZX compression has been decreased.
+
+ wimextract now allows wildcard characters in paths specified on the
+ command line. Also, the '--strict-wildcards' option has been removed
+ and replaced with the inverse option '--nullglob'. See the
+ documentation for wimextract for more details and changes.
+
+ The wimlib_extract_files() function is now considered deprecated in
+ favor of wimlib_extract_paths().
+
+ Fixed more permissions problems when extracting files on Windows.
+
+ A new '--no-attributes' option has been added to wimapply and
+ wimextract. The library flag is WIMLIB_EXTRACT_FLAG_NO_ATTRIBUTES.
+
+ The default chunk size is now set correctly when changing the
+ compression type of a WIM, for example with 'wimoptimize'.
+
+ The '--metadata' option to wiminfo has been replaced with the
+ '--detailed' option to wimdir.
+
+ In relevant wimlib-imagex commands, '--solid' may now be used as an
+ alias for '--pack-streams'.
+
+Version 1.6.0:
+ Support for extracting and updating the new version 3584 WIMs has been
+ added. These WIMs typically pack many streams ("files") together into a
+ single compressed resource, thereby saving space. This degrades the
+ performance of random access (such as that which occurs on a mounted
+ image), but optimizations have been implemented for extraction. These
+ new WIM files also typically use a new compression format (LZMS), which
+ is similar to LZMA and can offer a better compression ratio than LZX.
+ These new WIM files can be created using `wimcapture' with
+ the '--compress=lzms --pack-streams' options. Note: this new WIM format
+ is used by the Windows 8 web downloader, but important segments of the
+ raw '.esd' files are encrypted, so wimlib will not be able to extract
+ such files until they are first decrypted.
+
+ wimlib now supports extracting files and directories from a WIM image
+ based on a "listfile" that itself contains the list of paths to extract.
+ For `wimextract', the syntax is to specify @LISTFILE instead of a PATH,
+ and for the library itself, the new APIs are wimlib_extract_pathlist()
+ and wimlib_extract_paths(). Path globs containing wildcard characters
+ are supported.
+
+ For searching WIM files, wimlib now has configurable case sensitivity.
+ The default on Windows is still case-insensitive and the default on
+ UNIX-like systems is still case-sensitive, but this can be overridden
+ on either platform through flags to wimlib_global_init(). For
+ `wimlib-imagex', the environmental variable WIMLIB_IMAGEX_IGNORE_CASE
+ can be set to 1 or 0 for case-insensitive or case-sensitive behavior,
+ respectively.
+
+ Support for compression chunk sizes greater than the default of 32768
+ bytes has been added. A larger chunk size typically results in a better
+ compression ratio. However, the MS implementation is seemingly not
+ compatible with all chunk sizes, especially for LZX compression, so the
+ defaults remain unchanged, with the exception of the new LZMS-compressed
+ WIMs, which use a larger chunk size by default.
+
+ The compression/decompression API exported by wimlib has been changed.
+ Now one set of functions handles all supported compression formats.
+
+ `wimcapture' and `wimappend' will now display the progress of scanning
+ the directory tree to capture, in addition to the progress of writing
+ data to the WIM. The '--verbose' option no longer does anything. The
+ library API change for this is the addition of several members to
+ `struct wimlib_progress_info_scan' available to progress callbacks.
+
+ `mkwinpeimg' now correctly handles the '--start-script' option when the
+ start script is not in the working directory.
+
+ Sequential extraction, previously requested by using
+ WIMLIB_EXTRACT_FLAG_SEQUENTIAL, is now the default.
+ WIMLIB_EXTRACT_FLAG_FILE_ORDER can be used to get the old default
+ behavior (extract in file order).
+
+Version 1.5.3:
+ The new LZX compressor added in v1.5.2 has been improved and is now
+ enabled by default, except when `wimcapture' or `wimappend' is run
+ *without* the '--compress' option, in which case the faster LZX
+ compressor is used (the same as before). This behavior is reasonably
+ consistent with ImageX which actually uses "fast" (XPRESS) compression
+ by default. In those cases, use '--compress=maximum' to explicitly
+ capture a WIM image using the new (slower but better) LZX compressor.
+
+ The '--compress-slow' option still exists to `wimlib-imagex optimize',
+ but its new behavior is to tweak the new LZX compressor even more to
+ produce an even better compression ratio at the cost of more time spent
+ compressing.
+
+ `wimlib-imagex optimize' now supports the '--compress=TYPE' option,
+ which recompresses the WIM file using the specified compression TYPE.
+ The new library API function used for this is
+ wimlib_set_output_compression_type().
+
+ Added the wimlib_get_xml_data() function to allow library clients to
+ easily retrieve the raw XML data from a WIM file if needed.
+
+ Fixed a bug that could cause an error code to be incorrectly returned
+ when writing XML data containing a <WINDOWS> element.
+
+ Mounted WIM images will now correctly show the default file stream even
+ if appears in the alternate data stream entries of the corresponding WIM
+ directory entry.
+
+Version 1.5.2:
+ Added a new experimental LZX compressor which can be enabled by passing
+ '--compress-slow' to `wimlib-imagex capture' or `wimlib-imagex
+ optimize'. (The latter is only applicable if the WIM is already
+ LZX-compressed and the '--recompress' option is also given.) The
+ experimental compressor is much slower but compresses the data slightly
+ more --- currently usually to within a fraction of a percent of the
+ results from WIMGAPI/ImageX.
+
+ A workaround has been added for compatibility with versions of WinPE
+ that interpret alternate data stream entries in the boot WIM
+ incorrectly.
+
+ An alignment bug that caused a crash in the LZX decompressor on some
+ builds was fixed.
+
+ wimlib now attempts to clear the WIM_HDR_FLAG_WRITE_IN_PROGRESS flag in
+ the WIM header when restoring the previous state of a WIM it failed to
+ successfully update.
+
+ Added a workaround to avoid an access denied error on Windows when
+ replacing a WIM file that another process has opened.
+
+Version 1.5.1:
+ wimlib can now open WinPE WIMs from WAIK v2.1, which had a quirk that
+ needed to be handled.
+
+ A bug in the interpretation of negative IMAGE indices in the
+ --update-of=[WIMFILE:]IMAGE option to `wimlib-imagex capture' and
+ `wimlib-imagex append' has been fixed.
+
+ A workaround has been added to successfully apply security descriptors
+ with empty DACLs when the NTFS-3g apply mode is being used with NTFS-3g
+ 2013.1.13 or earlier.
+
+ `wimlib-imagex capture' can now accept the '--delta-from' option
+ multiple times.
+
+Version 1.5.0:
+ Added support for "pipable" WIMs. Pipable WIMs allow capturing images
+ to standard output and applying images from standard input, but they are
+ not compatible with Microsoft's software and are not created by default.
+ See the documentation for --pipable flag of `wimlib-imagex capture' for
+ more information.
+
+ To better support incremental backups, added support for declaring an
+ image as a modified form of another image. See the documentation for
+ the '--update-of' option of `wimlib-imagex append' and `wimlib-imagex
+ capture'.
+
+ Added supported for "delta" WIMs. See the documentation for the
+ '--delta-from' option of `wimlib-imagex capture'.
+
+ The library support for managing split WIMs has been changed to support
+ other arrangements, such as delta WIMs, and be easier to use. This
+ change is visible in `wimlib-imagex', which also can now accept the
+ '--ref' option multiple times, and also now supports "delta" WIMs as
+ mentioned above.
+
+ wimlib now preserves WIM integrity tables by default, even if
+ WIMLIB_WRITE_FLAG_CHECK_INTEGRITY is not specified. This changes the
+ behavior of `wimlib-imagex' whenever the WIM being operated on contains
+ an integrity table and the '--check' option is not specified.
+
+ `wimlib-imagex capture' now creates LZX-compressed WIMs by default
+ (when --compress is not specified). This provides the best compression
+ ratio by default, which is usually what is desired, at a cost of some
+ speed.
+
+ `wimlib-imagex' now supports being invoked as wimCOMMAND, where COMMAND
+ is the command as in `wimlib-imagex COMMAND'; for example, it can be
+ invoked as `wimapply' as an alternative to `wimlib-imagex apply'. The
+ appropriate hard links are created in UNIX installations of
+ `wimlib-imagex', while for the Windows distribution of `wimlib-imagex',
+ batch files that emulate this behavior are generated.
+
+ Security descriptors are now extracted correctly on Windows.
+
+ Fixed archiving DOS names in NTFS-3g capture mode.
+
+ The extraction code has been rewritten and it will now be easier to
+ support new features on all supported backends (currently Win32, UNIX,
+ and NTFS-3g). For example, hard-linked extraction mode (--hardlink) is
+ now supported on all backends, not just UNIX.
+
+ `mkwinpeimg' now supports grabbing files from the WAIK supplement rather
+ than the WAIK itself.
+
+ wimlib_global_init() now, by default, attempts to acquire additional
+ privileges on Windows, so library clients need not do this.
+
+ This update bumps the shared library version number up to 9, since it is
+ not binary compatibible with previous releases.
+
+Version 1.4.2:
+ Fixed bug in `wimlib-imagex export' that made it impossible to export an
+ image from a WIM that is readonly at the filesystem level.
+
+ Return error code rather than segfaulting when trying to list files from
+ a non-first part of a split WIM.
+
+ Joining a WIM will now preserve the RP_FIX and READONLY flags.
+
+Version 1.4.1:
+ On Windows, paths given to wimlib-imagex are now treated case
+ insensitively.
+
+ Improved behavior regarding invalid filenames; in particular, on
+ Windows, wimlib-imagex will, when extracting, now omit (with an option
+ to override this default) filenames differing only in case, or filenames
+ containing characters not valid on Windows.
+
+ On Windows, wimlib now supports capturing and extracting long paths
+ (longer than the so-called MAX_PATH).
+
+ On Windows, `wimlib-imagex update' now acquires proper privileges when
+ running as an Administrator.
+
+ `wimlib-imagex update' will now complain if no image is specified when
+ trying to update a multi-image WIM.
+
+ `wimlib-imagex update' now supports specifying a single update command
+ directly on the command line using the --command option.
+
+ wimlib-imagex will now choose different units for progress messages,
+ depending on the amount of data that needs to be processed.
+
+ `wimlib-imagex append' will now generate a unique WIM image name if no
+ name is specified and the defaulted name already exists in the WIM.
+
+ wimlib now allows you to create unnamed WIM images, which can then only
+ be referred to by index.
+
+ wimlib now allows you to explicitly declare you want write access to a
+ WIM by providing the WIMLIB_OPEN_FLAG_WRITE_ACCESS flag to
+ wimlib_open_wim().
+
+ wimlib now respects the WIM_HDR_FLAG_READONLY flag when set in the WIM
+ header.
+
+ Progress callbacks have been added to wimlib's wimlib_update_image()
+ function.
+
+ Added wimlib_get_wim_info(), wimlib_set_wim_info(),
+ wimlib_iterate_dir_tree(), and wimlib_iterate_lookup_table() functions
+ to the library.
+
+ NTFS-3g capture now only warns about two conditions previously treated
+ as errors.
+
+ Fixed a couple issues with using wimlib-imagex on UDF filesystems on
+ Windows.
+
+ wimlib now correctly detects and returns an error when reading a WIM
+ image with a cyclic directory structure. (Fun fact: such a WIM will
+ crash Microsoft's software.)
+
+Version 1.4.0:
+ Added new "extract" and "update" subcommands to wimlib-imagex, along
+ with associated APIs in the library. These commands are intended mainly
+ for Windows use but can be used on UNIX as well.
+
+ Many documentation improvements.
+
+ Fixed a bug in the Windows build where relative symbolic links were not
+ captured in reparse-point fixup mode.
+
+ Fixed a bug in the Windows build where file handles were left open to
+ the WIM file, causing `wimlib_imagex optimize' to fail in some cases.
+
+ Fixed a bug in the Windows build of wimlib-imagex where globbing
+ split-WIM parts could cause the program to crash.
+
+ Fixed a bug where the creation time of WIM images would be shown instead
+ of the last modification time.
+
+ With the Windows build it is now possible to restore a WIM containing
+ symbolic links as a non-Administrator; however you will receive warnings
+ about not being able to extract the symbolic links.
+
+Version 1.3.3:
+ Capturing a WIM image should now be significantly faster in most cases
+ due to improved use of the operating system's cache and avoiding reading
+ files twice whenever possible.
+
+ The Windows build should now work on Windows XP.
+
+ The Windows build now supports capturing and restoring hidden,
+ compressed, sparse, and encrypted files.
+
+ The Windows build now supports capturing and applying WIM images from
+ filesystems other than NTFS (with some reduced functionality).
+
+ The Windows build now extracts short names correctly.
+
+ Added support for "reparse-point" fixups (i.e. fixing up of symbolic
+ links). See docs for --rpfix and --norpfix flags of `wimlib-imagex
+ capture' and `wimlib-imagex apply'.
+
+ The performance of splitting and joining WIMs should be slightly
+ improved.
+
+ The LZX and XPRESS compression and decompression functions are now
+ exported from the library.
+
+Version 1.3.2:
+ Improvements and bugfixes for the Windows build.
+
+ Added --strict-acls options.
+
+ Fixed the way that wimlib determines the order of images in the WIM.
+
+Version 1.3.1:
+ Since wimlib can now be used on Windows, wimlib's implementation of
+ ImageX has been renamed to wimlib-imagex to avoid confusion with
+ Microsoft's implementation of ImageX, which would have the same file
+ name ("imagex.exe"). If you really don't like this you can pass the
+ --with-imagex-progname option to `configure' to choose a different name,
+ or even simply rename the binary yourself (but the former way will
+ configure the man pages to use the chosen name).
+
+ Various bugs fixed in the Windows build. Mainly to do with capturing
+ and restoring alternate data streams correctly in weird cases, and
+ requesting the correct privileges when opening files. Also added the
+ --noacls options to wimlib-imagex capture, append, and apply.
+
+ Windows build again: FindFirstStreamW() and FindNextStreamW() are now
+ dynamically loaded, so this may make the library compatible with Windows
+ XP (however, there may still be other problems).
+
+Version 1.3.0:
+ Added experimental support for native Windows builds. Binaries can be
+ downloaded from the SourceForge page.
+
+ --source-list option added to `imagex capture' and `imagex append'.
+
+ Better support for different character encodings.
+
+Version 1.2.6:
+ Storing UNIX file owners, groups, and modes in WIM images is now
+ possible using `imagex capture' with the --unix-data flag.
+
+ Minor bug fixes and documentation fixes.
+
+Version 1.2.5:
+ NTFS capture: Fixed capturing duplicate reparse points.
+
+ NTFS capture: Capture first unnamed stream if there are more than one
+ (print warning instead of error).
+
+ Allow multiple test cases to execute concurrently (e.g. make -j2 check).
+
+Version 1.2.4:
+ Added --arch switch to mkwinpeimg script to support getting AMD64 WinPE
+ from the WAIK.
+
+ Update to work with ntfs-3g version 2013.1.13.
+
+Version 1.2.3:
+ Fixed truncating file to shorter but non-zero length on read-write
+ mounted WIM image.
+
+ Various code cleanups and minor documentation fixes.
+
+Version 1.2.2:
+ LZX and XPRESS decompression have received some additional optimizations
+ and should now be even faster. (Although, they were already pretty
+ fast--- much faster than typical I/O speeds.)
+
+ Fixed a bug introduced in v1.2.1 that would cause a directory tree
+ containing hard links to be captured incorrectly in some cases.
+
git://wimlib.net / wimlib / blobdiff