/* * lzx_compress.c * * A compressor for the LZX compression format, as used in WIM files. */ /* * Copyright (C) 2012, 2013, 2014, 2015 Eric Biggers * * This file is free software; you can redistribute it and/or modify it under * the terms of the GNU Lesser General Public License as published by the Free * Software Foundation; either version 3 of the License, or (at your option) any * later version. * * This file is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS * FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more * details. * * You should have received a copy of the GNU Lesser General Public License * along with this file; if not, see http://www.gnu.org/licenses/. */ /* * This file contains a compressor for the LZX ("Lempel-Ziv eXtended") * compression format, as used in the WIM (Windows IMaging) file format. * * Two different parsing algorithms are implemented: "near-optimal" and "lazy". * "Near-optimal" is significantly slower than "lazy", but results in a better * compression ratio. The "near-optimal" algorithm is used at the default * compression level. * * This file may need some slight modifications to be used outside of the WIM * format. In particular, in other situations the LZX block header might be * slightly different, and sliding window support might be required. * * Note: LZX is a compression format derived from DEFLATE, the format used by * zlib and gzip. Both LZX and DEFLATE use LZ77 matching and Huffman coding. * Certain details are quite similar, such as the method for storing Huffman * codes. However, the main differences are: * * - LZX preprocesses the data to attempt to make x86 machine code slightly more * compressible before attempting to compress it further. * * - LZX uses a "main" alphabet which combines literals and matches, with the * match symbols containing a "length header" (giving all or part of the match * length) and an "offset slot" (giving, roughly speaking, the order of * magnitude of the match offset). * * - LZX does not have static Huffman blocks (that is, the kind with preset * Huffman codes); however it does have two types of dynamic Huffman blocks * ("verbatim" and "aligned"). * * - LZX has a minimum match length of 2 rather than 3. Length 2 matches can be * useful, but generally only if the parser is smart about choosing them. * * - In LZX, offset slots 0 through 2 actually represent entries in an LRU queue * of match offsets. This is very useful for certain types of files, such as * binary files that have repeating records. */ #ifdef HAVE_CONFIG_H # include "config.h" #endif /* * Start a new LZX block (with new Huffman codes) after this many bytes. * * Note: actual block sizes may slightly exceed this value. * * TODO: recursive splitting and cost evaluation might be good for an extremely * high compression mode, but otherwise it is almost always far too slow for how * much it helps. Perhaps some sort of heuristic would be useful? */ #define LZX_DIV_BLOCK_SIZE 32768 /* * LZX_CACHE_PER_POS is the number of lz_match structures to reserve in the * match cache for each byte position. This value should be high enough so that * nearly the time, all matches found in a given block can fit in the match * cache. However, fallback behavior (immediately terminating the block) on * cache overflow is still required. */ #define LZX_CACHE_PER_POS 7 /* * LZX_CACHE_LENGTH is the number of lz_match structures in the match cache, * excluding the extra "overflow" entries. The per-position multiplier is '1 + * LZX_CACHE_PER_POS' instead of 'LZX_CACHE_PER_POS' because there is an * overhead of one lz_match per position, used to hold the match count at that * position. */ #define LZX_CACHE_LENGTH (LZX_DIV_BLOCK_SIZE * (1 + LZX_CACHE_PER_POS)) /* * LZX_MAX_MATCHES_PER_POS is an upper bound on the number of matches that can * ever be saved in the match cache for a single position. Since each match we * save for a single position has a distinct length, we can use the number of * possible match lengths in LZX as this bound. This bound is guaranteed to be * valid in all cases, although if 'nice_match_length < LZX_MAX_MATCH_LEN', then * it will never actually be reached. */ #define LZX_MAX_MATCHES_PER_POS LZX_NUM_LENS /* * LZX_BIT_COST is a scaling factor that represents the cost to output one bit. * This makes it possible to consider fractional bit costs. * * Note: this is only useful as a statistical trick for when the true costs are * unknown. In reality, each token in LZX requires a whole number of bits to * output. */ #define LZX_BIT_COST 16 /* * Consideration of aligned offset costs is disabled for now, due to * insufficient benefit gained from the time spent. */ #define LZX_CONSIDER_ALIGNED_COSTS 0 /* * LZX_MAX_FAST_LEVEL is the maximum compression level at which we use the * faster algorithm. */ #define LZX_MAX_FAST_LEVEL 34 /* * LZX_HASH2_ORDER is the log base 2 of the number of entries in the hash table * for finding length 2 matches. This can be as high as 16 (in which case the * hash function is trivial), but using a smaller hash table speeds up * compression due to reduced cache pressure. */ #define LZX_HASH2_ORDER 12 #define LZX_HASH2_LENGTH (1UL << LZX_HASH2_ORDER) /* * These are the compressor-side limits on the codeword lengths for each Huffman * code. To make outputting bits slightly faster, some of these limits are * lower than the limits defined by the LZX format. This does not significantly * affect the compression ratio, at least for the block sizes we use. */ #define MAIN_CODEWORD_LIMIT 12 /* 64-bit: can buffer 4 main symbols */ #define LENGTH_CODEWORD_LIMIT 12 #define ALIGNED_CODEWORD_LIMIT 7 #define PRE_CODEWORD_LIMIT 7 #include "wimlib/lzx_common.h" /* * The maximum allowed window order for the matchfinder. */ #define MATCHFINDER_MAX_WINDOW_ORDER LZX_MAX_WINDOW_ORDER #include #include "wimlib/bt_matchfinder.h" #include "wimlib/compress_common.h" #include "wimlib/compressor_ops.h" #include "wimlib/error.h" #include "wimlib/hc_matchfinder.h" #include "wimlib/lz_extend.h" #include "wimlib/unaligned.h" #include "wimlib/util.h" struct lzx_output_bitstream; /* Codewords for the LZX Huffman codes. */ struct lzx_codewords { u32 main[LZX_MAINCODE_MAX_NUM_SYMBOLS]; u32 len[LZX_LENCODE_NUM_SYMBOLS]; u32 aligned[LZX_ALIGNEDCODE_NUM_SYMBOLS]; }; /* Codeword lengths (in bits) for the LZX Huffman codes. * A zero length means the corresponding codeword has zero frequency. */ struct lzx_lens { u8 main[LZX_MAINCODE_MAX_NUM_SYMBOLS + 1]; u8 len[LZX_LENCODE_NUM_SYMBOLS + 1]; u8 aligned[LZX_ALIGNEDCODE_NUM_SYMBOLS]; }; /* Cost model for near-optimal parsing */ struct lzx_costs { /* 'match_cost[offset_slot][len - LZX_MIN_MATCH_LEN]' is the cost for a * length 'len' match that has an offset belonging to 'offset_slot'. */ u32 match_cost[LZX_MAX_OFFSET_SLOTS][LZX_NUM_LENS]; /* Cost for each symbol in the main code */ u32 main[LZX_MAINCODE_MAX_NUM_SYMBOLS]; /* Cost for each symbol in the length code */ u32 len[LZX_LENCODE_NUM_SYMBOLS]; #if LZX_CONSIDER_ALIGNED_COSTS /* Cost for each symbol in the aligned code */ u32 aligned[LZX_ALIGNEDCODE_NUM_SYMBOLS]; #endif }; /* Codewords and lengths for the LZX Huffman codes. */ struct lzx_codes { struct lzx_codewords codewords; struct lzx_lens lens; }; /* Symbol frequency counters for the LZX Huffman codes. */ struct lzx_freqs { u32 main[LZX_MAINCODE_MAX_NUM_SYMBOLS]; u32 len[LZX_LENCODE_NUM_SYMBOLS]; u32 aligned[LZX_ALIGNEDCODE_NUM_SYMBOLS]; }; /* * Represents a run of literals followed by a match or end-of-block. This * struct is needed to temporarily store items chosen by the parser, since items * cannot be written until all items for the block have been chosen and the * block's Huffman codes have been computed. */ struct lzx_sequence { /* The number of literals in the run. This may be 0. The literals are * not stored explicitly in this structure; instead, they are read * directly from the uncompressed data. */ u16 litrunlen; /* If the next field doesn't indicate end-of-block, then this is the * match length minus LZX_MIN_MATCH_LEN. */ u16 adjusted_length; /* If bit 31 is clear, then this field contains the match header in bits * 0-8 and the match offset minus LZX_OFFSET_ADJUSTMENT in bits 9-30. * Otherwise, this sequence's literal run was the last literal run in * the block, so there is no match that follows it. */ u32 adjusted_offset_and_match_hdr; }; /* * This structure represents a byte position in the input buffer and a node in * the graph of possible match/literal choices. * * Logically, each incoming edge to this node is labeled with a literal or a * match that can be taken to reach this position from an earlier position; and * each outgoing edge from this node is labeled with a literal or a match that * can be taken to advance from this position to a later position. */ struct lzx_optimum_node { /* The cost, in bits, of the lowest-cost path that has been found to * reach this position. This can change as progressively lower cost * paths are found to reach this position. */ u32 cost; /* * The match or literal that was taken to reach this position. This can * change as progressively lower cost paths are found to reach this * position. * * This variable is divided into two bitfields. * * Literals: * Low bits are 0, high bits are the literal. * * Explicit offset matches: * Low bits are the match length, high bits are the offset plus 2. * * Repeat offset matches: * Low bits are the match length, high bits are the queue index. */ u32 item; #define OPTIMUM_OFFSET_SHIFT 9 #define OPTIMUM_LEN_MASK ((1 << OPTIMUM_OFFSET_SHIFT) - 1) } _aligned_attribute(8); /* * Least-recently-used queue for match offsets. * * This is represented as a 64-bit integer for efficiency. There are three * offsets of 21 bits each. Bit 64 is garbage. */ struct lzx_lru_queue { u64 R; }; #define LZX_QUEUE64_OFFSET_SHIFT 21 #define LZX_QUEUE64_OFFSET_MASK (((u64)1 << LZX_QUEUE64_OFFSET_SHIFT) - 1) #define LZX_QUEUE64_R0_SHIFT (0 * LZX_QUEUE64_OFFSET_SHIFT) #define LZX_QUEUE64_R1_SHIFT (1 * LZX_QUEUE64_OFFSET_SHIFT) #define LZX_QUEUE64_R2_SHIFT (2 * LZX_QUEUE64_OFFSET_SHIFT) #define LZX_QUEUE64_R0_MASK (LZX_QUEUE64_OFFSET_MASK << LZX_QUEUE64_R0_SHIFT) #define LZX_QUEUE64_R1_MASK (LZX_QUEUE64_OFFSET_MASK << LZX_QUEUE64_R1_SHIFT) #define LZX_QUEUE64_R2_MASK (LZX_QUEUE64_OFFSET_MASK << LZX_QUEUE64_R2_SHIFT) static inline void lzx_lru_queue_init(struct lzx_lru_queue *queue) { queue->R = ((u64)1 << LZX_QUEUE64_R0_SHIFT) | ((u64)1 << LZX_QUEUE64_R1_SHIFT) | ((u64)1 << LZX_QUEUE64_R2_SHIFT); } static inline u64 lzx_lru_queue_R0(struct lzx_lru_queue queue) { return (queue.R >> LZX_QUEUE64_R0_SHIFT) & LZX_QUEUE64_OFFSET_MASK; } static inline u64 lzx_lru_queue_R1(struct lzx_lru_queue queue) { return (queue.R >> LZX_QUEUE64_R1_SHIFT) & LZX_QUEUE64_OFFSET_MASK; } static inline u64 lzx_lru_queue_R2(struct lzx_lru_queue queue) { return (queue.R >> LZX_QUEUE64_R2_SHIFT) & LZX_QUEUE64_OFFSET_MASK; } /* Push a match offset onto the front (most recently used) end of the queue. */ static inline struct lzx_lru_queue lzx_lru_queue_push(struct lzx_lru_queue queue, u32 offset) { return (struct lzx_lru_queue) { .R = (queue.R << LZX_QUEUE64_OFFSET_SHIFT) | offset, }; } /* Pop a match offset off the front (most recently used) end of the queue. */ static inline u32 lzx_lru_queue_pop(struct lzx_lru_queue *queue_p) { u32 offset = queue_p->R & LZX_QUEUE64_OFFSET_MASK; queue_p->R >>= LZX_QUEUE64_OFFSET_SHIFT; return offset; } /* Swap a match offset to the front of the queue. */ static inline struct lzx_lru_queue lzx_lru_queue_swap(struct lzx_lru_queue queue, unsigned idx) { if (idx == 0) return queue; if (idx == 1) return (struct lzx_lru_queue) { .R = (lzx_lru_queue_R1(queue) << LZX_QUEUE64_R0_SHIFT) | (lzx_lru_queue_R0(queue) << LZX_QUEUE64_R1_SHIFT) | (queue.R & LZX_QUEUE64_R2_MASK), }; return (struct lzx_lru_queue) { .R = (lzx_lru_queue_R2(queue) << LZX_QUEUE64_R0_SHIFT) | (queue.R & LZX_QUEUE64_R1_MASK) | (lzx_lru_queue_R0(queue) << LZX_QUEUE64_R2_SHIFT), }; } /* The main LZX compressor structure */ struct lzx_compressor { /* The "nice" match length: if a match of this length is found, then * choose it immediately without further consideration. */ unsigned nice_match_length; /* The maximum search depth: consider at most this many potential * matches at each position. */ unsigned max_search_depth; /* The log base 2 of the LZX window size for LZ match offset encoding * purposes. This will be >= LZX_MIN_WINDOW_ORDER and <= * LZX_MAX_WINDOW_ORDER. */ unsigned window_order; /* The number of symbols in the main alphabet. This depends on * @window_order, since @window_order determines the maximum possible * offset. */ unsigned num_main_syms; /* Number of optimization passes per block */ unsigned num_optim_passes; /* The preprocessed buffer of data being compressed */ u8 *in_buffer; /* The number of bytes of data to be compressed, which is the number of * bytes of data in @in_buffer that are actually valid. */ size_t in_nbytes; /* Pointer to the compress() implementation chosen at allocation time */ void (*impl)(struct lzx_compressor *, struct lzx_output_bitstream *); /* If true, the compressor need not preserve the input buffer if it * compresses the data successfully. */ bool destructive; /* The Huffman symbol frequency counters for the current block. */ struct lzx_freqs freqs; /* The Huffman codes for the current and previous blocks. The one with * index 'codes_index' is for the current block, and the other one is * for the previous block. */ struct lzx_codes codes[2]; unsigned codes_index; /* The matches and literals that the parser has chosen for the current * block. The required length of this array is limited by the maximum * number of matches that can ever be chosen for a single block. */ struct lzx_sequence chosen_sequences[DIV_ROUND_UP(LZX_DIV_BLOCK_SIZE, LZX_MIN_MATCH_LEN)]; /* Tables for mapping adjusted offsets to offset slots */ /* offset slots [0, 29] */ u8 offset_slot_tab_1[32768]; /* offset slots [30, 49] */ u8 offset_slot_tab_2[128]; union { /* Data for greedy or lazy parsing */ struct { /* Hash chains matchfinder (MUST BE LAST!!!) */ struct hc_matchfinder hc_mf; }; /* Data for near-optimal parsing */ struct { /* * The graph nodes for the current block. * * We need at least 'LZX_DIV_BLOCK_SIZE + * LZX_MAX_MATCH_LEN - 1' nodes because that is the * maximum block size that may be used. Add 1 because * we need a node to represent end-of-block. * * It is possible that nodes past end-of-block are * accessed during match consideration, but this can * only occur if the block was truncated at * LZX_DIV_BLOCK_SIZE. So the same bound still applies. * Note that since nodes past the end of the block will * never actually have an effect on the items that are * chosen for the block, it makes no difference what * their costs are initialized to (if anything). */ struct lzx_optimum_node optimum_nodes[LZX_DIV_BLOCK_SIZE + LZX_MAX_MATCH_LEN - 1 + 1]; /* The cost model for the current block */ struct lzx_costs costs; /* * Cached matches for the current block. This array * contains the matches that were found at each position * in the block. Specifically, for each position, there * is a special 'struct lz_match' whose 'length' field * contains the number of matches that were found at * that position; this is followed by the matches * themselves, if any, sorted by strictly increasing * length. * * Note: in rare cases, there will be a very high number * of matches in the block and this array will overflow. * If this happens, we force the end of the current * block. LZX_CACHE_LENGTH is the length at which we * actually check for overflow. The extra slots beyond * this are enough to absorb the worst case overflow, * which occurs if starting at * &match_cache[LZX_CACHE_LENGTH - 1], we write the * match count header, then write * LZX_MAX_MATCHES_PER_POS matches, then skip searching * for matches at 'LZX_MAX_MATCH_LEN - 1' positions and * write the match count header for each. */ struct lz_match match_cache[LZX_CACHE_LENGTH + LZX_MAX_MATCHES_PER_POS + LZX_MAX_MATCH_LEN - 1]; /* Hash table for finding length 2 matches */ pos_t hash2_tab[LZX_HASH2_LENGTH]; /* Binary trees matchfinder (MUST BE LAST!!!) */ struct bt_matchfinder bt_mf; }; }; }; /* * Structure to keep track of the current state of sending bits to the * compressed output buffer. * * The LZX bitstream is encoded as a sequence of 16-bit coding units. */ struct lzx_output_bitstream { /* Bits that haven't yet been written to the output buffer. */ machine_word_t bitbuf; /* Number of bits currently held in @bitbuf. */ u32 bitcount; /* Pointer to the start of the output buffer. */ u8 *start; /* Pointer to the position in the output buffer at which the next coding * unit should be written. */ u8 *next; /* Pointer just past the end of the output buffer, rounded down to a * 2-byte boundary. */ u8 *end; }; /* Can the specified number of bits always be added to 'bitbuf' after any * pending 16-bit coding units have been flushed? */ #define CAN_BUFFER(n) ((n) <= (8 * sizeof(machine_word_t)) - 16) /* * Initialize the output bitstream. * * @os * The output bitstream structure to initialize. * @buffer * The buffer being written to. * @size * Size of @buffer, in bytes. */ static void lzx_init_output(struct lzx_output_bitstream *os, void *buffer, size_t size) { os->bitbuf = 0; os->bitcount = 0; os->start = buffer; os->next = os->start; os->end = os->start + (size & ~1); } /* Add some bits to the bitbuffer variable of the output bitstream. The caller * must make sure there is enough room. */ static inline void lzx_add_bits(struct lzx_output_bitstream *os, u32 bits, unsigned num_bits) { os->bitbuf = (os->bitbuf << num_bits) | bits; os->bitcount += num_bits; } /* Flush bits from the bitbuffer variable to the output buffer. 'max_num_bits' * specifies the maximum number of bits that may have been added since the last * flush. */ static inline void lzx_flush_bits(struct lzx_output_bitstream *os, unsigned max_num_bits) { if (os->end - os->next < 6) return; put_unaligned_u16_le(os->bitbuf >> (os->bitcount - 16), os->next + 0); if (max_num_bits > 16) put_unaligned_u16_le(os->bitbuf >> (os->bitcount - 32), os->next + 2); if (max_num_bits > 32) put_unaligned_u16_le(os->bitbuf >> (os->bitcount - 48), os->next + 4); os->next += (os->bitcount >> 4) << 1; os->bitcount &= 15; } /* Add at most 16 bits to the bitbuffer and flush it. */ static inline void lzx_write_bits(struct lzx_output_bitstream *os, u32 bits, unsigned num_bits) { lzx_add_bits(os, bits, num_bits); lzx_flush_bits(os, 16); } /* * Flush the last coding unit to the output buffer if needed. Return the total * number of bytes written to the output buffer, or 0 if an overflow occurred. */ static u32 lzx_flush_output(struct lzx_output_bitstream *os) { if (os->end - os->next < 6) return 0; if (os->bitcount != 0) { put_unaligned_u16_le(os->bitbuf << (16 - os->bitcount), os->next); os->next += 2; } return os->next - os->start; } /* Build the main, length, and aligned offset Huffman codes used in LZX. * * This takes as input the frequency tables for each code and produces as output * a set of tables that map symbols to codewords and codeword lengths. */ static void lzx_make_huffman_codes(struct lzx_compressor *c) { const struct lzx_freqs *freqs = &c->freqs; struct lzx_codes *codes = &c->codes[c->codes_index]; STATIC_ASSERT(MAIN_CODEWORD_LIMIT >= 9 && MAIN_CODEWORD_LIMIT <= LZX_MAX_MAIN_CODEWORD_LEN); STATIC_ASSERT(LENGTH_CODEWORD_LIMIT >= 9 && LENGTH_CODEWORD_LIMIT <= LZX_MAX_LEN_CODEWORD_LEN); STATIC_ASSERT(ALIGNED_CODEWORD_LIMIT >= LZX_NUM_ALIGNED_OFFSET_BITS && ALIGNED_CODEWORD_LIMIT <= LZX_MAX_ALIGNED_CODEWORD_LEN); make_canonical_huffman_code(c->num_main_syms, MAIN_CODEWORD_LIMIT, freqs->main, codes->lens.main, codes->codewords.main); make_canonical_huffman_code(LZX_LENCODE_NUM_SYMBOLS, LENGTH_CODEWORD_LIMIT, freqs->len, codes->lens.len, codes->codewords.len); make_canonical_huffman_code(LZX_ALIGNEDCODE_NUM_SYMBOLS, ALIGNED_CODEWORD_LIMIT, freqs->aligned, codes->lens.aligned, codes->codewords.aligned); } /* Reset the symbol frequencies for the LZX Huffman codes. */ static void lzx_reset_symbol_frequencies(struct lzx_compressor *c) { memset(&c->freqs, 0, sizeof(c->freqs)); } static unsigned lzx_compute_precode_items(const u8 lens[restrict], const u8 prev_lens[restrict], u32 precode_freqs[restrict], unsigned precode_items[restrict]) { unsigned *itemptr; unsigned run_start; unsigned run_end; unsigned extra_bits; int delta; u8 len; itemptr = precode_items; run_start = 0; while (!((len = lens[run_start]) & 0x80)) { /* len = the length being repeated */ /* Find the next run of codeword lengths. */ run_end = run_start + 1; /* Fast case for a single length. */ if (likely(len != lens[run_end])) { delta = prev_lens[run_start] - len; if (delta < 0) delta += 17; precode_freqs[delta]++; *itemptr++ = delta; run_start++; continue; } /* Extend the run. */ do { run_end++; } while (len == lens[run_end]); if (len == 0) { /* Run of zeroes. */ /* Symbol 18: RLE 20 to 51 zeroes at a time. */ while ((run_end - run_start) >= 20) { extra_bits = min((run_end - run_start) - 20, 0x1f); precode_freqs[18]++; *itemptr++ = 18 | (extra_bits << 5); run_start += 20 + extra_bits; } /* Symbol 17: RLE 4 to 19 zeroes at a time. */ if ((run_end - run_start) >= 4) { extra_bits = min((run_end - run_start) - 4, 0xf); precode_freqs[17]++; *itemptr++ = 17 | (extra_bits << 5); run_start += 4 + extra_bits; } } else { /* A run of nonzero lengths. */ /* Symbol 19: RLE 4 to 5 of any length at a time. */ while ((run_end - run_start) >= 4) { extra_bits = (run_end - run_start) > 4; delta = prev_lens[run_start] - len; if (delta < 0) delta += 17; precode_freqs[19]++; precode_freqs[delta]++; *itemptr++ = 19 | (extra_bits << 5) | (delta << 6); run_start += 4 + extra_bits; } } /* Output any remaining lengths without RLE. */ while (run_start != run_end) { delta = prev_lens[run_start] - len; if (delta < 0) delta += 17; precode_freqs[delta]++; *itemptr++ = delta; run_start++; } } return itemptr - precode_items; } /* * Output a Huffman code in the compressed form used in LZX. * * The Huffman code is represented in the output as a logical series of codeword * lengths from which the Huffman code, which must be in canonical form, can be * reconstructed. * * The codeword lengths are themselves compressed using a separate Huffman code, * the "precode", which contains a symbol for each possible codeword length in * the larger code as well as several special symbols to represent repeated * codeword lengths (a form of run-length encoding). The precode is itself * constructed in canonical form, and its codeword lengths are represented * literally in 20 4-bit fields that immediately precede the compressed codeword * lengths of the larger code. * * Furthermore, the codeword lengths of the larger code are actually represented * as deltas from the codeword lengths of the corresponding code in the previous * block. * * @os: * Bitstream to which to write the compressed Huffman code. * @lens: * The codeword lengths, indexed by symbol, in the Huffman code. * @prev_lens: * The codeword lengths, indexed by symbol, in the corresponding Huffman * code in the previous block, or all zeroes if this is the first block. * @num_lens: * The number of symbols in the Huffman code. */ static void lzx_write_compressed_code(struct lzx_output_bitstream *os, const u8 lens[restrict], const u8 prev_lens[restrict], unsigned num_lens) { u32 precode_freqs[LZX_PRECODE_NUM_SYMBOLS]; u8 precode_lens[LZX_PRECODE_NUM_SYMBOLS]; u32 precode_codewords[LZX_PRECODE_NUM_SYMBOLS]; unsigned precode_items[num_lens]; unsigned num_precode_items; unsigned precode_item; unsigned precode_sym; unsigned i; u8 saved = lens[num_lens]; *(u8 *)(lens + num_lens) = 0x80; for (i = 0; i < LZX_PRECODE_NUM_SYMBOLS; i++) precode_freqs[i] = 0; /* Compute the "items" (RLE / literal tokens and extra bits) with which * the codeword lengths in the larger code will be output. */ num_precode_items = lzx_compute_precode_items(lens, prev_lens, precode_freqs, precode_items); /* Build the precode. */ STATIC_ASSERT(PRE_CODEWORD_LIMIT >= 5 && PRE_CODEWORD_LIMIT <= LZX_MAX_PRE_CODEWORD_LEN); make_canonical_huffman_code(LZX_PRECODE_NUM_SYMBOLS, PRE_CODEWORD_LIMIT, precode_freqs, precode_lens, precode_codewords); /* Output the lengths of the codewords in the precode. */ for (i = 0; i < LZX_PRECODE_NUM_SYMBOLS; i++) lzx_write_bits(os, precode_lens[i], LZX_PRECODE_ELEMENT_SIZE); /* Output the encoded lengths of the codewords in the larger code. */ for (i = 0; i < num_precode_items; i++) { precode_item = precode_items[i]; precode_sym = precode_item & 0x1F; lzx_add_bits(os, precode_codewords[precode_sym], precode_lens[precode_sym]); if (precode_sym >= 17) { if (precode_sym == 17) { lzx_add_bits(os, precode_item >> 5, 4); } else if (precode_sym == 18) { lzx_add_bits(os, precode_item >> 5, 5); } else { lzx_add_bits(os, (precode_item >> 5) & 1, 1); precode_sym = precode_item >> 6; lzx_add_bits(os, precode_codewords[precode_sym], precode_lens[precode_sym]); } } STATIC_ASSERT(CAN_BUFFER(2 * PRE_CODEWORD_LIMIT + 1)); lzx_flush_bits(os, 2 * PRE_CODEWORD_LIMIT + 1); } *(u8 *)(lens + num_lens) = saved; } /* * Write all matches and literal bytes (which were precomputed) in an LZX * compressed block to the output bitstream in the final compressed * representation. * * @os * The output bitstream. * @block_type * The chosen type of the LZX compressed block (LZX_BLOCKTYPE_ALIGNED or * LZX_BLOCKTYPE_VERBATIM). * @block_data * The uncompressed data of the block. * @sequences * The matches and literals to output, given as a series of sequences. * @codes * The main, length, and aligned offset Huffman codes for the current * LZX compressed block. */ static void lzx_write_sequences(struct lzx_output_bitstream *os, int block_type, const u8 *block_data, const struct lzx_sequence sequences[], const struct lzx_codes *codes) { const struct lzx_sequence *seq = sequences; u32 ones_if_aligned = 0 - (block_type == LZX_BLOCKTYPE_ALIGNED); for (;;) { /* Output the next sequence. */ unsigned litrunlen = seq->litrunlen; unsigned match_hdr; unsigned main_symbol; unsigned adjusted_length; u32 adjusted_offset; unsigned offset_slot; unsigned num_extra_bits; u32 extra_bits; /* Output the literal run of the sequence. */ if (litrunlen) { /* Is the literal run nonempty? */ /* Verify optimization is enabled on 64-bit */ STATIC_ASSERT(sizeof(machine_word_t) < 8 || CAN_BUFFER(4 * MAIN_CODEWORD_LIMIT)); if (CAN_BUFFER(4 * MAIN_CODEWORD_LIMIT)) { /* 64-bit: write 4 literals at a time. */ while (litrunlen >= 4) { unsigned lit0 = block_data[0]; unsigned lit1 = block_data[1]; unsigned lit2 = block_data[2]; unsigned lit3 = block_data[3]; lzx_add_bits(os, codes->codewords.main[lit0], codes->lens.main[lit0]); lzx_add_bits(os, codes->codewords.main[lit1], codes->lens.main[lit1]); lzx_add_bits(os, codes->codewords.main[lit2], codes->lens.main[lit2]); lzx_add_bits(os, codes->codewords.main[lit3], codes->lens.main[lit3]); lzx_flush_bits(os, 4 * MAIN_CODEWORD_LIMIT); block_data += 4; litrunlen -= 4; } if (litrunlen--) { unsigned lit = *block_data++; lzx_add_bits(os, codes->codewords.main[lit], codes->lens.main[lit]); if (litrunlen--) { unsigned lit = *block_data++; lzx_add_bits(os, codes->codewords.main[lit], codes->lens.main[lit]); if (litrunlen--) { unsigned lit = *block_data++; lzx_add_bits(os, codes->codewords.main[lit], codes->lens.main[lit]); lzx_flush_bits(os, 3 * MAIN_CODEWORD_LIMIT); } else { lzx_flush_bits(os, 2 * MAIN_CODEWORD_LIMIT); } } else { lzx_flush_bits(os, 1 * MAIN_CODEWORD_LIMIT); } } } else { /* 32-bit: write 1 literal at a time. */ do { unsigned lit = *block_data++; lzx_add_bits(os, codes->codewords.main[lit], codes->lens.main[lit]); lzx_flush_bits(os, MAIN_CODEWORD_LIMIT); } while (--litrunlen); } } /* Was this the last literal run? */ if (seq->adjusted_offset_and_match_hdr & 0x80000000) return; /* Nope; output the match. */ match_hdr = seq->adjusted_offset_and_match_hdr & 0x1FF; main_symbol = LZX_NUM_CHARS + match_hdr; adjusted_length = seq->adjusted_length; block_data += adjusted_length + LZX_MIN_MATCH_LEN; offset_slot = match_hdr / LZX_NUM_LEN_HEADERS; adjusted_offset = seq->adjusted_offset_and_match_hdr >> 9; num_extra_bits = lzx_extra_offset_bits[offset_slot]; extra_bits = adjusted_offset - lzx_offset_slot_base[offset_slot]; #define MAX_MATCH_BITS (MAIN_CODEWORD_LIMIT + LENGTH_CODEWORD_LIMIT + \ 14 + ALIGNED_CODEWORD_LIMIT) /* Verify optimization is enabled on 64-bit */ STATIC_ASSERT(sizeof(machine_word_t) < 8 || CAN_BUFFER(MAX_MATCH_BITS)); /* Output the main symbol for the match. */ lzx_add_bits(os, codes->codewords.main[main_symbol], codes->lens.main[main_symbol]); if (!CAN_BUFFER(MAX_MATCH_BITS)) lzx_flush_bits(os, MAIN_CODEWORD_LIMIT); /* If needed, output the length symbol for the match. */ if (adjusted_length >= LZX_NUM_PRIMARY_LENS) { lzx_add_bits(os, codes->codewords.len[adjusted_length - LZX_NUM_PRIMARY_LENS], codes->lens.len[adjusted_length - LZX_NUM_PRIMARY_LENS]); if (!CAN_BUFFER(MAX_MATCH_BITS)) lzx_flush_bits(os, LENGTH_CODEWORD_LIMIT); } /* Output the extra offset bits for the match. In aligned * offset blocks, the lowest 3 bits of the adjusted offset are * Huffman-encoded using the aligned offset code, provided that * there are at least extra 3 offset bits required. All other * extra offset bits are output verbatim. */ if ((adjusted_offset & ones_if_aligned) >= 16) { lzx_add_bits(os, extra_bits >> LZX_NUM_ALIGNED_OFFSET_BITS, num_extra_bits - LZX_NUM_ALIGNED_OFFSET_BITS); if (!CAN_BUFFER(MAX_MATCH_BITS)) lzx_flush_bits(os, 14); lzx_add_bits(os, codes->codewords.aligned[adjusted_offset & LZX_ALIGNED_OFFSET_BITMASK], codes->lens.aligned[adjusted_offset & LZX_ALIGNED_OFFSET_BITMASK]); if (!CAN_BUFFER(MAX_MATCH_BITS)) lzx_flush_bits(os, ALIGNED_CODEWORD_LIMIT); } else { lzx_add_bits(os, extra_bits, num_extra_bits); if (!CAN_BUFFER(MAX_MATCH_BITS)) lzx_flush_bits(os, 17); } if (CAN_BUFFER(MAX_MATCH_BITS)) lzx_flush_bits(os, MAX_MATCH_BITS); /* Advance to the next sequence. */ seq++; } } static void lzx_write_compressed_block(const u8 *block_begin, int block_type, u32 block_size, unsigned window_order, unsigned num_main_syms, const struct lzx_sequence sequences[], const struct lzx_codes * codes, const struct lzx_lens * prev_lens, struct lzx_output_bitstream * os) { LZX_ASSERT(block_type == LZX_BLOCKTYPE_ALIGNED || block_type == LZX_BLOCKTYPE_VERBATIM); /* The first three bits indicate the type of block and are one of the * LZX_BLOCKTYPE_* constants. */ lzx_write_bits(os, block_type, 3); /* Output the block size. * * The original LZX format seemed to always encode the block size in 3 * bytes. However, the implementation in WIMGAPI, as used in WIM files, * uses the first bit to indicate whether the block is the default size * (32768) or a different size given explicitly by the next 16 bits. * * By default, this compressor uses a window size of 32768 and therefore * follows the WIMGAPI behavior. However, this compressor also supports * window sizes greater than 32768 bytes, which do not appear to be * supported by WIMGAPI. In such cases, we retain the default size bit * to mean a size of 32768 bytes but output non-default block size in 24 * bits rather than 16. The compatibility of this behavior is unknown * because WIMs created with chunk size greater than 32768 can seemingly * only be opened by wimlib anyway. */ if (block_size == LZX_DEFAULT_BLOCK_SIZE) { lzx_write_bits(os, 1, 1); } else { lzx_write_bits(os, 0, 1); if (window_order >= 16) lzx_write_bits(os, block_size >> 16, 8); lzx_write_bits(os, block_size & 0xFFFF, 16); } /* If it's an aligned offset block, output the aligned offset code. */ if (block_type == LZX_BLOCKTYPE_ALIGNED) { for (int i = 0; i < LZX_ALIGNEDCODE_NUM_SYMBOLS; i++) { lzx_write_bits(os, codes->lens.aligned[i], LZX_ALIGNEDCODE_ELEMENT_SIZE); } } /* Output the main code (two parts). */ lzx_write_compressed_code(os, codes->lens.main, prev_lens->main, LZX_NUM_CHARS); lzx_write_compressed_code(os, codes->lens.main + LZX_NUM_CHARS, prev_lens->main + LZX_NUM_CHARS, num_main_syms - LZX_NUM_CHARS); /* Output the length code. */ lzx_write_compressed_code(os, codes->lens.len, prev_lens->len, LZX_LENCODE_NUM_SYMBOLS); /* Output the compressed matches and literals. */ lzx_write_sequences(os, block_type, block_begin, sequences, codes); } /* Given the frequencies of symbols in an LZX-compressed block and the * corresponding Huffman codes, return LZX_BLOCKTYPE_ALIGNED or * LZX_BLOCKTYPE_VERBATIM if an aligned offset or verbatim block, respectively, * will take fewer bits to output. */ static int lzx_choose_verbatim_or_aligned(const struct lzx_freqs * freqs, const struct lzx_codes * codes) { u32 aligned_cost = 0; u32 verbatim_cost = 0; /* A verbatim block requires 3 bits in each place that an aligned symbol * would be used in an aligned offset block. */ for (unsigned i = 0; i < LZX_ALIGNEDCODE_NUM_SYMBOLS; i++) { verbatim_cost += LZX_NUM_ALIGNED_OFFSET_BITS * freqs->aligned[i]; aligned_cost += codes->lens.aligned[i] * freqs->aligned[i]; } /* Account for output of the aligned offset code. */ aligned_cost += LZX_ALIGNEDCODE_ELEMENT_SIZE * LZX_ALIGNEDCODE_NUM_SYMBOLS; if (aligned_cost < verbatim_cost) return LZX_BLOCKTYPE_ALIGNED; else return LZX_BLOCKTYPE_VERBATIM; } /* * Return the offset slot for the specified adjusted match offset, using the * compressor's acceleration tables to speed up the mapping. */ static inline unsigned lzx_comp_get_offset_slot(struct lzx_compressor *c, u32 adjusted_offset) { if (adjusted_offset < ARRAY_LEN(c->offset_slot_tab_1)) return c->offset_slot_tab_1[adjusted_offset]; return c->offset_slot_tab_2[adjusted_offset >> 14]; } /* * Finish an LZX block: * * - build the Huffman codes * - decide whether to output the block as VERBATIM or ALIGNED * - output the block * - swap the indices of the current and previous Huffman codes */ static void lzx_finish_block(struct lzx_compressor *c, struct lzx_output_bitstream *os, const u8 *block_begin, u32 block_size, u32 seq_idx) { int block_type; lzx_make_huffman_codes(c); block_type = lzx_choose_verbatim_or_aligned(&c->freqs, &c->codes[c->codes_index]); lzx_write_compressed_block(block_begin, block_type, block_size, c->window_order, c->num_main_syms, &c->chosen_sequences[seq_idx], &c->codes[c->codes_index], &c->codes[c->codes_index ^ 1].lens, os); c->codes_index ^= 1; } /* Tally the Huffman symbol for a literal and increment the literal run length. */ static inline void lzx_record_literal(struct lzx_compressor *c, unsigned literal, u32 *litrunlen_p) { c->freqs.main[literal]++; ++*litrunlen_p; } /* Tally the Huffman symbol for a match, save the match data and the length of * the preceding literal run in the next lzx_sequence, and update the recent * offsets queue. */ static inline void lzx_record_match(struct lzx_compressor *c, unsigned length, u32 offset_data, u32 recent_offsets[LZX_NUM_RECENT_OFFSETS], u32 *litrunlen_p, struct lzx_sequence **next_seq_p) { u32 litrunlen = *litrunlen_p; struct lzx_sequence *next_seq = *next_seq_p; unsigned offset_slot; unsigned v; v = length - LZX_MIN_MATCH_LEN; /* Save the literal run length and adjusted length. */ next_seq->litrunlen = litrunlen; next_seq->adjusted_length = v; /* Compute the length header and tally the length symbol if needed */ if (v >= LZX_NUM_PRIMARY_LENS) { c->freqs.len[v - LZX_NUM_PRIMARY_LENS]++; v = LZX_NUM_PRIMARY_LENS; } /* Compute the offset slot */ offset_slot = lzx_comp_get_offset_slot(c, offset_data); /* Compute the match header. */ v += offset_slot * LZX_NUM_LEN_HEADERS; /* Save the adjusted offset and match header. */ next_seq->adjusted_offset_and_match_hdr = (offset_data << 9) | v; /* Tally the main symbol. */ c->freqs.main[LZX_NUM_CHARS + v]++; /* Update the recent offsets queue. */ if (offset_data < LZX_NUM_RECENT_OFFSETS) { /* Repeat offset match */ swap(recent_offsets[0], recent_offsets[offset_data]); } else { /* Explicit offset match */ /* Tally the aligned offset symbol if needed */ if (offset_data >= 16) c->freqs.aligned[offset_data & LZX_ALIGNED_OFFSET_BITMASK]++; recent_offsets[2] = recent_offsets[1]; recent_offsets[1] = recent_offsets[0]; recent_offsets[0] = offset_data - LZX_OFFSET_ADJUSTMENT; } /* Reset the literal run length and advance to the next sequence. */ *next_seq_p = next_seq + 1; *litrunlen_p = 0; } /* Finish the last lzx_sequence. The last lzx_sequence is just a literal run; * there is no match. This literal run may be empty. */ static inline void lzx_finish_sequence(struct lzx_sequence *last_seq, u32 litrunlen) { last_seq->litrunlen = litrunlen; /* Special value to mark last sequence */ last_seq->adjusted_offset_and_match_hdr = 0x80000000; } /* * Given the minimum-cost path computed through the item graph for the current * block, walk the path and count how many of each symbol in each Huffman-coded * alphabet would be required to output the items (matches and literals) along * the path. * * Note that the path will be walked backwards (from the end of the block to the * beginning of the block), but this doesn't matter because this function only * computes frequencies. */ static void lzx_tally_item_list(struct lzx_compressor *c, u32 block_size) { u32 node_idx = block_size; for (;;) { u32 len; u32 offset_data; unsigned v; unsigned offset_slot; /* Tally literals until either a match or the beginning of the * block is reached. */ for (;;) { u32 item = c->optimum_nodes[node_idx].item; len = item & OPTIMUM_LEN_MASK; offset_data = item >> OPTIMUM_OFFSET_SHIFT; if (len != 0) /* Not a literal? */ break; /* Tally the main symbol for the literal. */ c->freqs.main[offset_data]++; if (--node_idx == 0) /* Beginning of block was reached? */ return; } node_idx -= len; /* Tally a match. */ /* Tally the aligned offset symbol if needed. */ if (offset_data >= 16) c->freqs.aligned[offset_data & LZX_ALIGNED_OFFSET_BITMASK]++; /* Tally the length symbol if needed. */ v = len - LZX_MIN_MATCH_LEN;; if (v >= LZX_NUM_PRIMARY_LENS) { c->freqs.len[v - LZX_NUM_PRIMARY_LENS]++; v = LZX_NUM_PRIMARY_LENS; } /* Tally the main symbol. */ offset_slot = lzx_comp_get_offset_slot(c, offset_data); v += offset_slot * LZX_NUM_LEN_HEADERS; c->freqs.main[LZX_NUM_CHARS + v]++; if (node_idx == 0) /* Beginning of block was reached? */ return; } } /* * Like lzx_tally_item_list(), but this function also generates the list of * lzx_sequences for the minimum-cost path and writes it to c->chosen_sequences, * ready to be output to the bitstream after the Huffman codes are computed. * The lzx_sequences will be written to decreasing memory addresses as the path * is walked backwards, which means they will end up in the expected * first-to-last order. The return value is the index in c->chosen_sequences at * which the lzx_sequences begin. */ static u32 lzx_record_item_list(struct lzx_compressor *c, u32 block_size) { u32 node_idx = block_size; u32 seq_idx = ARRAY_LEN(c->chosen_sequences) - 1; u32 lit_start_node; /* Special value to mark last sequence */ c->chosen_sequences[seq_idx].adjusted_offset_and_match_hdr = 0x80000000; lit_start_node = node_idx; for (;;) { u32 len; u32 offset_data; unsigned v; unsigned offset_slot; /* Record literals until either a match or the beginning of the * block is reached. */ for (;;) { u32 item = c->optimum_nodes[node_idx].item; len = item & OPTIMUM_LEN_MASK; offset_data = item >> OPTIMUM_OFFSET_SHIFT; if (len != 0) /* Not a literal? */ break; /* Tally the main symbol for the literal. */ c->freqs.main[offset_data]++; if (--node_idx == 0) /* Beginning of block was reached? */ goto out; } /* Save the literal run length for the next sequence (the * "previous sequence" when walking backwards). */ c->chosen_sequences[seq_idx--].litrunlen = lit_start_node - node_idx; node_idx -= len; lit_start_node = node_idx; /* Record a match. */ /* Tally the aligned offset symbol if needed. */ if (offset_data >= 16) c->freqs.aligned[offset_data & LZX_ALIGNED_OFFSET_BITMASK]++; /* Save the adjusted length. */ v = len - LZX_MIN_MATCH_LEN; c->chosen_sequences[seq_idx].adjusted_length = v; /* Tally the length symbol if needed. */ if (v >= LZX_NUM_PRIMARY_LENS) { c->freqs.len[v - LZX_NUM_PRIMARY_LENS]++; v = LZX_NUM_PRIMARY_LENS; } /* Tally the main symbol. */ offset_slot = lzx_comp_get_offset_slot(c, offset_data); v += offset_slot * LZX_NUM_LEN_HEADERS; c->freqs.main[LZX_NUM_CHARS + v]++; /* Save the adjusted offset and match header. */ c->chosen_sequences[seq_idx].adjusted_offset_and_match_hdr = (offset_data << 9) | v; if (node_idx == 0) /* Beginning of block was reached? */ goto out; } out: /* Save the literal run length for the first sequence. */ c->chosen_sequences[seq_idx].litrunlen = lit_start_node - node_idx; /* Return the index in c->chosen_sequences at which the lzx_sequences * begin. */ return seq_idx; } /* * Find an inexpensive path through the graph of possible match/literal choices * for the current block. The nodes of the graph are * c->optimum_nodes[0...block_size]. They correspond directly to the bytes in * the current block, plus one extra node for end-of-block. The edges of the * graph are matches and literals. The goal is to find the minimum cost path * from 'c->optimum_nodes[0]' to 'c->optimum_nodes[block_size]'. * * The algorithm works forwards, starting at 'c->optimum_nodes[0]' and * proceeding forwards one node at a time. At each node, a selection of matches * (len >= 2), as well as the literal byte (len = 1), is considered. An item of * length 'len' provides a new path to reach the node 'len' bytes later. If * such a path is the lowest cost found so far to reach that later node, then * that later node is updated with the new path. * * Note that although this algorithm is based on minimum cost path search, due * to various simplifying assumptions the result is not guaranteed to be the * true minimum cost, or "optimal", path over the graph of all valid LZX * representations of this block. * * Also, note that because of the presence of the recent offsets queue (which is * a type of adaptive state), the algorithm cannot work backwards and compute * "cost to end" instead of "cost to beginning". Furthermore, the way the * algorithm handles this adaptive state in the "minimum cost" parse is actually * only an approximation. It's possible for the globally optimal, minimum cost * path to contain a prefix, ending at a position, where that path prefix is * *not* the minimum cost path to that position. This can happen if such a path * prefix results in a different adaptive state which results in lower costs * later. The algorithm does not solve this problem; it only considers the * lowest cost to reach each individual position. */ static struct lzx_lru_queue lzx_find_min_cost_path(struct lzx_compressor * const restrict c, const u8 * const restrict block_begin, const u32 block_size, const struct lzx_lru_queue initial_queue) { struct lzx_optimum_node *cur_node = c->optimum_nodes; struct lzx_optimum_node * const end_node = &c->optimum_nodes[block_size]; struct lz_match *cache_ptr = c->match_cache; const u8 *in_next = block_begin; const u8 * const block_end = block_begin + block_size; /* Instead of storing the match offset LRU queues in the * 'lzx_optimum_node' structures, we save memory (and cache lines) by * storing them in a smaller array. This works because the algorithm * only requires a limited history of the adaptive state. Once a given * state is more than LZX_MAX_MATCH_LEN bytes behind the current node, * it is no longer needed. */ struct lzx_lru_queue queues[512]; STATIC_ASSERT(ARRAY_LEN(queues) >= LZX_MAX_MATCH_LEN + 1); #define QUEUE(in) (queues[(uintptr_t)(in) % ARRAY_LEN(queues)]) /* Initially, the cost to reach each node is "infinity". */ memset(c->optimum_nodes, 0xFF, (block_size + 1) * sizeof(c->optimum_nodes[0])); QUEUE(block_begin) = initial_queue; /* The following loop runs 'block_size' iterations, one per node. */ do { unsigned num_matches; unsigned literal; u32 cost; /* * A selection of matches for the block was already saved in * memory so that we don't have to run the uncompressed data * through the matchfinder on every optimization pass. However, * we still search for repeat offset matches during each * optimization pass because we cannot predict the state of the * recent offsets queue. But as a heuristic, we don't bother * searching for repeat offset matches if the general-purpose * matchfinder failed to find any matches. * * Note that a match of length n at some offset implies there is * also a match of length l for LZX_MIN_MATCH_LEN <= l <= n at * that same offset. In other words, we don't necessarily need * to use the full length of a match. The key heuristic that * saves a significicant amount of time is that for each * distinct length, we only consider the smallest offset for * which that length is available. This heuristic also applies * to repeat offsets, which we order specially: R0 < R1 < R2 < * any explicit offset. Of course, this heuristic may be * produce suboptimal results because offset slots in LZX are * subject to entropy encoding, but in practice this is a useful * heuristic. */ num_matches = cache_ptr->length; cache_ptr++; if (num_matches) { struct lz_match *end_matches = cache_ptr + num_matches; unsigned next_len = LZX_MIN_MATCH_LEN; unsigned max_len = min(block_end - in_next, LZX_MAX_MATCH_LEN); const u8 *matchptr; /* Consider R0 match */ matchptr = in_next - lzx_lru_queue_R0(QUEUE(in_next)); if (load_u16_unaligned(matchptr) != load_u16_unaligned(in_next)) goto R0_done; STATIC_ASSERT(LZX_MIN_MATCH_LEN == 2); do { u32 cost = cur_node->cost + c->costs.match_cost[0][ next_len - LZX_MIN_MATCH_LEN]; if (cost <= (cur_node + next_len)->cost) { (cur_node + next_len)->cost = cost; (cur_node + next_len)->item = (0 << OPTIMUM_OFFSET_SHIFT) | next_len; } if (unlikely(++next_len > max_len)) { cache_ptr = end_matches; goto done_matches; } } while (in_next[next_len - 1] == matchptr[next_len - 1]); R0_done: /* Consider R1 match */ matchptr = in_next - lzx_lru_queue_R1(QUEUE(in_next)); if (load_u16_unaligned(matchptr) != load_u16_unaligned(in_next)) goto R1_done; if (matchptr[next_len - 1] != in_next[next_len - 1]) goto R1_done; for (unsigned len = 2; len < next_len - 1; len++) if (matchptr[len] != in_next[len]) goto R1_done; do { u32 cost = cur_node->cost + c->costs.match_cost[1][ next_len - LZX_MIN_MATCH_LEN]; if (cost <= (cur_node + next_len)->cost) { (cur_node + next_len)->cost = cost; (cur_node + next_len)->item = (1 << OPTIMUM_OFFSET_SHIFT) | next_len; } if (unlikely(++next_len > max_len)) { cache_ptr = end_matches; goto done_matches; } } while (in_next[next_len - 1] == matchptr[next_len - 1]); R1_done: /* Consider R2 match */ matchptr = in_next - lzx_lru_queue_R2(QUEUE(in_next)); if (load_u16_unaligned(matchptr) != load_u16_unaligned(in_next)) goto R2_done; if (matchptr[next_len - 1] != in_next[next_len - 1]) goto R2_done; for (unsigned len = 2; len < next_len - 1; len++) if (matchptr[len] != in_next[len]) goto R2_done; do { u32 cost = cur_node->cost + c->costs.match_cost[2][ next_len - LZX_MIN_MATCH_LEN]; if (cost <= (cur_node + next_len)->cost) { (cur_node + next_len)->cost = cost; (cur_node + next_len)->item = (2 << OPTIMUM_OFFSET_SHIFT) | next_len; } if (unlikely(++next_len > max_len)) { cache_ptr = end_matches; goto done_matches; } } while (in_next[next_len - 1] == matchptr[next_len - 1]); R2_done: while (next_len > cache_ptr->length) if (++cache_ptr == end_matches) goto done_matches; /* Consider explicit offset matches */ do { u32 offset = cache_ptr->offset; u32 offset_data = offset + LZX_OFFSET_ADJUSTMENT; unsigned offset_slot = lzx_comp_get_offset_slot(c, offset_data); do { u32 cost = cur_node->cost + c->costs.match_cost[offset_slot][ next_len - LZX_MIN_MATCH_LEN]; #if LZX_CONSIDER_ALIGNED_COSTS if (lzx_extra_offset_bits[offset_slot] >= LZX_NUM_ALIGNED_OFFSET_BITS) cost += c->costs.aligned[offset_data & LZX_ALIGNED_OFFSET_BITMASK]; #endif if (cost < (cur_node + next_len)->cost) { (cur_node + next_len)->cost = cost; (cur_node + next_len)->item = (offset_data << OPTIMUM_OFFSET_SHIFT) | next_len; } } while (++next_len <= cache_ptr->length); } while (++cache_ptr != end_matches); } done_matches: /* Consider coding a literal. * To avoid an extra branch, actually checking the preferability * of coding the literal is integrated into the queue update * code below. */ literal = *in_next++; cost = cur_node->cost + c->costs.main[lzx_main_symbol_for_literal(literal)]; /* Advance to the next position. */ cur_node++; /* The lowest-cost path to the current position is now known. * Finalize the recent offsets queue that results from taking * this lowest-cost path. */ if (cost <= cur_node->cost) { /* Literal: queue remains unchanged. */ cur_node->cost = cost; cur_node->item = (u32)literal << OPTIMUM_OFFSET_SHIFT; QUEUE(in_next) = QUEUE(in_next - 1); } else { /* Match: queue update is needed. */ unsigned len = cur_node->item & OPTIMUM_LEN_MASK; u32 offset_data = cur_node->item >> OPTIMUM_OFFSET_SHIFT; if (offset_data >= LZX_NUM_RECENT_OFFSETS) { /* Explicit offset match: insert offset at front */ QUEUE(in_next) = lzx_lru_queue_push(QUEUE(in_next - len), offset_data - LZX_OFFSET_ADJUSTMENT); } else { /* Repeat offset match: swap offset to front */ QUEUE(in_next) = lzx_lru_queue_swap(QUEUE(in_next - len), offset_data); } } } while (cur_node != end_node); /* Return the match offset queue at the end of the minimum cost path. */ return QUEUE(block_end); } /* Given the costs for the main and length codewords, compute 'match_costs'. */ static void lzx_compute_match_costs(struct lzx_compressor *c) { unsigned num_offset_slots = lzx_get_num_offset_slots(c->window_order); struct lzx_costs *costs = &c->costs; for (unsigned offset_slot = 0; offset_slot < num_offset_slots; offset_slot++) { u32 extra_cost = (u32)lzx_extra_offset_bits[offset_slot] * LZX_BIT_COST; unsigned main_symbol = lzx_main_symbol_for_match(offset_slot, 0); unsigned i; #if LZX_CONSIDER_ALIGNED_COSTS if (lzx_extra_offset_bits[offset_slot] >= LZX_NUM_ALIGNED_OFFSET_BITS) extra_cost -= LZX_NUM_ALIGNED_OFFSET_BITS * LZX_BIT_COST; #endif for (i = 0; i < LZX_NUM_PRIMARY_LENS; i++) costs->match_cost[offset_slot][i] = costs->main[main_symbol++] + extra_cost; extra_cost += costs->main[main_symbol]; for (; i < LZX_NUM_LENS; i++) costs->match_cost[offset_slot][i] = costs->len[i - LZX_NUM_PRIMARY_LENS] + extra_cost; } } /* Set default LZX Huffman symbol costs to bootstrap the iterative optimization * algorithm. */ static void lzx_set_default_costs(struct lzx_compressor *c, const u8 *block, u32 block_size) { u32 i; bool have_byte[256]; unsigned num_used_bytes; /* The costs below are hard coded to use a scaling factor of 16. */ STATIC_ASSERT(LZX_BIT_COST == 16); /* * Heuristics: * * - Use smaller initial costs for literal symbols when the input buffer * contains fewer distinct bytes. * * - Assume that match symbols are more costly than literal symbols. * * - Assume that length symbols for shorter lengths are less costly than * length symbols for longer lengths. */ for (i = 0; i < 256; i++) have_byte[i] = false; for (i = 0; i < block_size; i++) have_byte[block[i]] = true; num_used_bytes = 0; for (i = 0; i < 256; i++) num_used_bytes += have_byte[i]; for (i = 0; i < 256; i++) c->costs.main[i] = 140 - (256 - num_used_bytes) / 4; for (; i < c->num_main_syms; i++) c->costs.main[i] = 170; for (i = 0; i < LZX_LENCODE_NUM_SYMBOLS; i++) c->costs.len[i] = 103 + (i / 4); #if LZX_CONSIDER_ALIGNED_COSTS for (i = 0; i < LZX_ALIGNEDCODE_NUM_SYMBOLS; i++) c->costs.aligned[i] = LZX_NUM_ALIGNED_OFFSET_BITS * LZX_BIT_COST; #endif lzx_compute_match_costs(c); } /* Update the current cost model to reflect the computed Huffman codes. */ static void lzx_update_costs(struct lzx_compressor *c) { unsigned i; const struct lzx_lens *lens = &c->codes[c->codes_index].lens; for (i = 0; i < c->num_main_syms; i++) c->costs.main[i] = (lens->main[i] ? lens->main[i] : 15) * LZX_BIT_COST; for (i = 0; i < LZX_LENCODE_NUM_SYMBOLS; i++) c->costs.len[i] = (lens->len[i] ? lens->len[i] : 15) * LZX_BIT_COST; #if LZX_CONSIDER_ALIGNED_COSTS for (i = 0; i < LZX_ALIGNEDCODE_NUM_SYMBOLS; i++) c->costs.aligned[i] = (lens->aligned[i] ? lens->aligned[i] : 7) * LZX_BIT_COST; #endif lzx_compute_match_costs(c); } static struct lzx_lru_queue lzx_optimize_and_write_block(struct lzx_compressor * const restrict c, struct lzx_output_bitstream * const restrict os, const u8 * const restrict block_begin, const u32 block_size, const struct lzx_lru_queue initial_queue) { unsigned num_passes_remaining = c->num_optim_passes; struct lzx_lru_queue new_queue; u32 seq_idx; /* The first optimization pass uses a default cost model. Each * additional optimization pass uses a cost model derived from the * Huffman code computed in the previous pass. */ lzx_set_default_costs(c, block_begin, block_size); lzx_reset_symbol_frequencies(c); do { new_queue = lzx_find_min_cost_path(c, block_begin, block_size, initial_queue); if (num_passes_remaining > 1) { lzx_tally_item_list(c, block_size); lzx_make_huffman_codes(c); lzx_update_costs(c); lzx_reset_symbol_frequencies(c); } } while (--num_passes_remaining); seq_idx = lzx_record_item_list(c, block_size); lzx_finish_block(c, os, block_begin, block_size, seq_idx); return new_queue; } /* * This is the "near-optimal" LZX compressor. * * For each block, it performs a relatively thorough graph search to find an * inexpensive (in terms of compressed size) way to output that block. * * Note: there are actually many things this algorithm leaves on the table in * terms of compression ratio. So although it may be "near-optimal", it is * certainly not "optimal". The goal is not to produce the optimal compression * ratio, which for LZX is probably impossible within any practical amount of * time, but rather to produce a compression ratio significantly better than a * simpler "greedy" or "lazy" parse while still being relatively fast. */ static void lzx_compress_near_optimal(struct lzx_compressor *c, struct lzx_output_bitstream *os) { const u8 * const in_begin = c->in_buffer; const u8 * in_next = in_begin; const u8 * const in_end = in_begin + c->in_nbytes; unsigned max_len = LZX_MAX_MATCH_LEN; unsigned nice_len = min(c->nice_match_length, max_len); u32 next_hash; struct lzx_lru_queue queue; bt_matchfinder_init(&c->bt_mf); memset(c->hash2_tab, 0, sizeof(c->hash2_tab)); next_hash = bt_matchfinder_hash_3_bytes(in_next); lzx_lru_queue_init(&queue); do { /* Starting a new block */ const u8 * const in_block_begin = in_next; const u8 * const in_block_end = in_next + min(LZX_DIV_BLOCK_SIZE, in_end - in_next); /* Run the block through the matchfinder and cache the matches. */ struct lz_match *cache_ptr = c->match_cache; do { struct lz_match *lz_matchptr; u32 hash2; pos_t cur_match; unsigned best_len; /* If approaching the end of the input buffer, adjust * 'max_len' and 'nice_len' accordingly. */ if (unlikely(max_len > in_end - in_next)) { max_len = in_end - in_next; nice_len = min(max_len, nice_len); /* This extra check is needed to ensure that we * never output a length 2 match of the very * last two bytes with the very first two bytes, * since such a match has an offset too large to * be represented. */ if (unlikely(max_len < 3)) { in_next++; cache_ptr->length = 0; cache_ptr++; continue; } } lz_matchptr = cache_ptr + 1; /* Check for a length 2 match. */ hash2 = lz_hash_2_bytes(in_next, LZX_HASH2_ORDER); cur_match = c->hash2_tab[hash2]; c->hash2_tab[hash2] = in_next - in_begin; if (cur_match != 0 && (LZX_HASH2_ORDER == 16 || load_u16_unaligned(&in_begin[cur_match]) == load_u16_unaligned(in_next))) { lz_matchptr->length = 2; lz_matchptr->offset = in_next - &in_begin[cur_match]; lz_matchptr++; } /* Check for matches of length >= 3. */ lz_matchptr = bt_matchfinder_get_matches(&c->bt_mf, in_begin, in_next, 3, max_len, nice_len, c->max_search_depth, &next_hash, &best_len, lz_matchptr); in_next++; cache_ptr->length = lz_matchptr - (cache_ptr + 1); cache_ptr = lz_matchptr; /* * If there was a very long match found, then don't * cache any matches for the bytes covered by that * match. This avoids degenerate behavior when * compressing highly redundant data, where the number * of matches can be very large. * * This heuristic doesn't actually hurt the compression * ratio very much. If there's a long match, then the * data must be highly compressible, so it doesn't * matter as much what we do. */ if (best_len >= nice_len) { --best_len; do { if (unlikely(max_len > in_end - in_next)) { max_len = in_end - in_next; nice_len = min(max_len, nice_len); if (unlikely(max_len < 3)) { in_next++; cache_ptr->length = 0; cache_ptr++; continue; } } c->hash2_tab[lz_hash_2_bytes(in_next, LZX_HASH2_ORDER)] = in_next - in_begin; bt_matchfinder_skip_position(&c->bt_mf, in_begin, in_next, in_end, nice_len, c->max_search_depth, &next_hash); in_next++; cache_ptr->length = 0; cache_ptr++; } while (--best_len); } } while (in_next < in_block_end && likely(cache_ptr < &c->match_cache[LZX_CACHE_LENGTH])); /* We've finished running the block through the matchfinder. * Now choose a match/literal sequence and write the block. */ queue = lzx_optimize_and_write_block(c, os, in_block_begin, in_next - in_block_begin, queue); } while (in_next != in_end); } /* * Given a pointer to the current byte sequence and the current list of recent * match offsets, find the longest repeat offset match. * * If no match of at least 2 bytes is found, then return 0. * * If a match of at least 2 bytes is found, then return its length and set * *rep_max_idx_ret to the index of its offset in @queue. */ static unsigned lzx_find_longest_repeat_offset_match(const u8 * const in_next, const u32 bytes_remaining, const u32 recent_offsets[LZX_NUM_RECENT_OFFSETS], unsigned *rep_max_idx_ret) { STATIC_ASSERT(LZX_NUM_RECENT_OFFSETS == 3); LZX_ASSERT(bytes_remaining >= 2); const unsigned max_len = min(bytes_remaining, LZX_MAX_MATCH_LEN); const u16 next_2_bytes = load_u16_unaligned(in_next); const u8 *matchptr; unsigned rep_max_len; unsigned rep_max_idx; unsigned rep_len; matchptr = in_next - recent_offsets[0]; if (load_u16_unaligned(matchptr) == next_2_bytes) rep_max_len = lz_extend(in_next, matchptr, 2, max_len); else rep_max_len = 0; rep_max_idx = 0; matchptr = in_next - recent_offsets[1]; if (load_u16_unaligned(matchptr) == next_2_bytes) { rep_len = lz_extend(in_next, matchptr, 2, max_len); if (rep_len > rep_max_len) { rep_max_len = rep_len; rep_max_idx = 1; } } matchptr = in_next - recent_offsets[2]; if (load_u16_unaligned(matchptr) == next_2_bytes) { rep_len = lz_extend(in_next, matchptr, 2, max_len); if (rep_len > rep_max_len) { rep_max_len = rep_len; rep_max_idx = 2; } } *rep_max_idx_ret = rep_max_idx; return rep_max_len; } /* Fast heuristic scoring for lazy parsing: how "good" is this match? */ static inline unsigned lzx_explicit_offset_match_score(unsigned len, u32 adjusted_offset) { unsigned score = len; if (adjusted_offset < 4096) score++; if (adjusted_offset < 256) score++; return score; } static inline unsigned lzx_repeat_offset_match_score(unsigned rep_len, unsigned rep_idx) { return rep_len + 3; } /* This is the "lazy" LZX compressor. */ static void lzx_compress_lazy(struct lzx_compressor *c, struct lzx_output_bitstream *os) { const u8 * const in_begin = c->in_buffer; const u8 * in_next = in_begin; const u8 * const in_end = in_begin + c->in_nbytes; unsigned max_len = LZX_MAX_MATCH_LEN; unsigned nice_len = min(c->nice_match_length, max_len); STATIC_ASSERT(LZX_NUM_RECENT_OFFSETS == 3); u32 recent_offsets[3] = {1, 1, 1}; u32 next_hashes[2] = {}; hc_matchfinder_init(&c->hc_mf); do { /* Starting a new block */ const u8 * const in_block_begin = in_next; const u8 * const in_block_end = in_next + min(LZX_DIV_BLOCK_SIZE, in_end - in_next); struct lzx_sequence *next_seq = c->chosen_sequences; unsigned cur_len; u32 cur_offset; u32 cur_offset_data; unsigned cur_score; unsigned next_len; u32 next_offset; u32 next_offset_data; unsigned next_score; unsigned rep_max_len; unsigned rep_max_idx; unsigned rep_score; unsigned skip_len; u32 litrunlen = 0; lzx_reset_symbol_frequencies(c); do { if (unlikely(max_len > in_end - in_next)) { max_len = in_end - in_next; nice_len = min(max_len, nice_len); } /* Find the longest match at the current position. */ cur_len = hc_matchfinder_longest_match(&c->hc_mf, in_begin, in_next - in_begin, 2, max_len, nice_len, c->max_search_depth, next_hashes, &cur_offset); if (cur_len < 3 || (cur_len == 3 && cur_offset >= 8192 - LZX_OFFSET_ADJUSTMENT && cur_offset != recent_offsets[0] && cur_offset != recent_offsets[1] && cur_offset != recent_offsets[2])) { /* There was no match found, or the only match found * was a distant length 3 match. Output a literal. */ lzx_record_literal(c, *in_next++, &litrunlen); continue; } if (cur_offset == recent_offsets[0]) { in_next++; cur_offset_data = 0; skip_len = cur_len - 1; goto choose_cur_match; } cur_offset_data = cur_offset + LZX_OFFSET_ADJUSTMENT; cur_score = lzx_explicit_offset_match_score(cur_len, cur_offset_data); /* Consider a repeat offset match */ rep_max_len = lzx_find_longest_repeat_offset_match(in_next, in_end - in_next, recent_offsets, &rep_max_idx); in_next++; if (rep_max_len >= 3 && (rep_score = lzx_repeat_offset_match_score(rep_max_len, rep_max_idx)) >= cur_score) { cur_len = rep_max_len; cur_offset_data = rep_max_idx; skip_len = rep_max_len - 1; goto choose_cur_match; } have_cur_match: /* We have a match at the current position. */ /* If we have a very long match, choose it immediately. */ if (cur_len >= nice_len) { skip_len = cur_len - 1; goto choose_cur_match; } /* See if there's a better match at the next position. */ if (unlikely(max_len > in_end - in_next)) { max_len = in_end - in_next; nice_len = min(max_len, nice_len); } next_len = hc_matchfinder_longest_match(&c->hc_mf, in_begin, in_next - in_begin, cur_len - 2, max_len, nice_len, c->max_search_depth / 2, next_hashes, &next_offset); if (next_len <= cur_len - 2) { in_next++; skip_len = cur_len - 2; goto choose_cur_match; } next_offset_data = next_offset + LZX_OFFSET_ADJUSTMENT; next_score = lzx_explicit_offset_match_score(next_len, next_offset_data); rep_max_len = lzx_find_longest_repeat_offset_match(in_next, in_end - in_next, recent_offsets, &rep_max_idx); in_next++; if (rep_max_len >= 3 && (rep_score = lzx_repeat_offset_match_score(rep_max_len, rep_max_idx)) >= next_score) { if (rep_score > cur_score) { /* The next match is better, and it's a * repeat offset match. */ lzx_record_literal(c, *(in_next - 2), &litrunlen); cur_len = rep_max_len; cur_offset_data = rep_max_idx; skip_len = cur_len - 1; goto choose_cur_match; } } else { if (next_score > cur_score) { /* The next match is better, and it's an * explicit offset match. */ lzx_record_literal(c, *(in_next - 2), &litrunlen); cur_len = next_len; cur_offset_data = next_offset_data; cur_score = next_score; goto have_cur_match; } } /* The original match was better. */ skip_len = cur_len - 2; choose_cur_match: lzx_record_match(c, cur_len, cur_offset_data, recent_offsets, &litrunlen, &next_seq); in_next = hc_matchfinder_skip_positions(&c->hc_mf, in_begin, in_next - in_begin, in_end - in_begin, skip_len, next_hashes); } while (in_next < in_block_end); lzx_finish_sequence(next_seq, litrunlen); lzx_finish_block(c, os, in_block_begin, in_next - in_block_begin, 0); } while (in_next != in_end); } /* Generate the acceleration tables for offset slots. */ static void lzx_init_offset_slot_tabs(struct lzx_compressor *c) { u32 adjusted_offset = 0; unsigned slot = 0; /* slots [0, 29] */ for (; adjusted_offset < ARRAY_LEN(c->offset_slot_tab_1); adjusted_offset++) { if (adjusted_offset >= lzx_offset_slot_base[slot + 1]) slot++; c->offset_slot_tab_1[adjusted_offset] = slot; } /* slots [30, 49] */ for (; adjusted_offset < LZX_MAX_WINDOW_SIZE; adjusted_offset += (u32)1 << 14) { if (adjusted_offset >= lzx_offset_slot_base[slot + 1]) slot++; c->offset_slot_tab_2[adjusted_offset >> 14] = slot; } } static size_t lzx_get_compressor_size(size_t max_bufsize, unsigned compression_level) { if (compression_level <= LZX_MAX_FAST_LEVEL) { return offsetof(struct lzx_compressor, hc_mf) + hc_matchfinder_size(max_bufsize); } else { return offsetof(struct lzx_compressor, bt_mf) + bt_matchfinder_size(max_bufsize); } } static u64 lzx_get_needed_memory(size_t max_bufsize, unsigned compression_level, bool destructive) { u64 size = 0; if (max_bufsize > LZX_MAX_WINDOW_SIZE) return 0; size += lzx_get_compressor_size(max_bufsize, compression_level); if (!destructive) size += max_bufsize; /* in_buffer */ return size; } static int lzx_create_compressor(size_t max_bufsize, unsigned compression_level, bool destructive, void **c_ret) { unsigned window_order; struct lzx_compressor *c; window_order = lzx_get_window_order(max_bufsize); if (window_order == 0) return WIMLIB_ERR_INVALID_PARAM; c = MALLOC(lzx_get_compressor_size(max_bufsize, compression_level)); if (!c) goto oom0; c->destructive = destructive; c->num_main_syms = lzx_get_num_main_syms(window_order); c->window_order = window_order; if (!c->destructive) { c->in_buffer = MALLOC(max_bufsize); if (!c->in_buffer) goto oom1; } if (compression_level <= LZX_MAX_FAST_LEVEL) { /* Fast compression: Use lazy parsing. */ c->impl = lzx_compress_lazy; c->max_search_depth = (36 * compression_level) / 20; c->nice_match_length = (72 * compression_level) / 20; /* lzx_compress_lazy() needs max_search_depth >= 2 because it * halves the max_search_depth when attempting a lazy match, and * max_search_depth cannot be 0. */ if (c->max_search_depth < 2) c->max_search_depth = 2; } else { /* Normal / high compression: Use near-optimal parsing. */ c->impl = lzx_compress_near_optimal; /* Scale nice_match_length and max_search_depth with the * compression level. */ c->max_search_depth = (24 * compression_level) / 50; c->nice_match_length = (32 * compression_level) / 50; /* Set a number of optimization passes appropriate for the * compression level. */ c->num_optim_passes = 1; if (compression_level >= 45) c->num_optim_passes++; /* Use more optimization passes for higher compression levels. * But the more passes there are, the less they help --- so * don't add them linearly. */ if (compression_level >= 70) { c->num_optim_passes++; if (compression_level >= 100) c->num_optim_passes++; if (compression_level >= 150) c->num_optim_passes++; if (compression_level >= 200) c->num_optim_passes++; if (compression_level >= 300) c->num_optim_passes++; } } /* max_search_depth == 0 is invalid. */ if (c->max_search_depth < 1) c->max_search_depth = 1; if (c->nice_match_length > LZX_MAX_MATCH_LEN) c->nice_match_length = LZX_MAX_MATCH_LEN; lzx_init_offset_slot_tabs(c); *c_ret = c; return 0; oom1: FREE(c); oom0: return WIMLIB_ERR_NOMEM; } static size_t lzx_compress(const void *restrict in, size_t in_nbytes, void *restrict out, size_t out_nbytes_avail, void *restrict _c) { struct lzx_compressor *c = _c; struct lzx_output_bitstream os; size_t result; /* Don't bother trying to compress very small inputs. */ if (in_nbytes < 100) return 0; /* Copy the input data into the internal buffer and preprocess it. */ if (c->destructive) c->in_buffer = (void *)in; else memcpy(c->in_buffer, in, in_nbytes); c->in_nbytes = in_nbytes; lzx_do_e8_preprocessing(c->in_buffer, in_nbytes); /* Initially, the previous Huffman codeword lengths are all zeroes. */ c->codes_index = 0; memset(&c->codes[1].lens, 0, sizeof(struct lzx_lens)); /* Initialize the output bitstream. */ lzx_init_output(&os, out, out_nbytes_avail); /* Call the compression level-specific compress() function. */ (*c->impl)(c, &os); /* Flush the output bitstream and return the compressed size or 0. */ result = lzx_flush_output(&os); if (!result && c->destructive) lzx_undo_e8_preprocessing(c->in_buffer, c->in_nbytes); return result; } static void lzx_free_compressor(void *_c) { struct lzx_compressor *c = _c; if (!c->destructive) FREE(c->in_buffer); FREE(c); } const struct compressor_ops lzx_compressor_ops = { .get_needed_memory = lzx_get_needed_memory, .create_compressor = lzx_create_compressor, .compress = lzx_compress, .free_compressor = lzx_free_compressor, };