wimlib.net Git - wimlib/blob - src/win32_apply.c

   1 /*
   2  * win32_apply.c - Windows-specific code for applying files from a WIM image.
   3  */
   4
   5 /*
   6  * Copyright (C) 2013 Eric Biggers
   7  *
   8  * This file is part of wimlib, a library for working with WIM files.
   9  *
  10  * wimlib is free software; you can redistribute it and/or modify it under the
  11  * terms of the GNU General Public License as published by the Free
  12  * Software Foundation; either version 3 of the License, or (at your option)
  13  * any later version.
  14  *
  15  * wimlib is distributed in the hope that it will be useful, but WITHOUT ANY
  16  * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
  17  * A PARTICULAR PURPOSE. See the GNU General Public License for more
  18  * details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with wimlib; if not, see http://www.gnu.org/licenses/.
  22  */
  23
  24 #ifdef __WIN32__
  25
  26 #ifdef HAVE_CONFIG_H
  27 #  include "config.h"
  28 #endif
  29
  30 #include <aclapi.h> /* for SetSecurityInfo() */
  31
  32 #include "wimlib/win32_common.h"
  33
  34 #include "wimlib/apply.h"
  35 #include "wimlib/dentry.h"
  36 #include "wimlib/endianness.h"
  37 #include "wimlib/error.h"
  38 #include "wimlib/lookup_table.h"
  39 #include "wimlib/metadata.h"
  40 #include "wimlib/reparse.h"
  41 #include "wimlib/security.h"
  42
  43 #define MAX_CREATE_HARD_LINK_WARNINGS 5
  44 #define MAX_CREATE_SOFT_LINK_WARNINGS 5
  45
  46 #define MAX_SET_SD_ACCESS_DENIED_WARNINGS 1
  47 #define MAX_SET_SACL_PRIV_NOTHELD_WARNINGS 1
  48
  49 static const wchar_t *apply_access_denied_msg =
  50 L"If you are not running this program as the administrator, you may\n"
  51  "          need to do so, so that all data and metadata can be extracted\n"
  52  "          exactly as the origignal copy.  However, if you do not care that\n"
  53  "          the security descriptors are extracted correctly, you could run\n"
  54  "          `wimlib-imagex apply' with the --no-acls flag instead.\n"
  55  ;
  56
  57
  58 static int
  59 win32_extract_try_rpfix(u8 *rpbuf,
  60                         u16 *rpbuflen_p,
  61                         const wchar_t *extract_root_realpath,
  62                         unsigned extract_root_realpath_nchars)
  63 {
  64         struct reparse_data rpdata;
  65         wchar_t *target;
  66         size_t target_nchars;
  67         size_t stripped_nchars;
  68         wchar_t *stripped_target;
  69         wchar_t stripped_target_nchars;
  70         int ret;
  71
  72         utf16lechar *new_target;
  73         utf16lechar *new_print_name;
  74         size_t new_target_nchars;
  75         size_t new_print_name_nchars;
  76         utf16lechar *p;
  77
  78         ret = parse_reparse_data(rpbuf, *rpbuflen_p, &rpdata);
  79         if (ret)
  80                 return ret;
  81
  82         if (extract_root_realpath[0] == L'\0' ||
  83             extract_root_realpath[1] != L':' ||
  84             extract_root_realpath[2] != L'\\')
  85         {
  86                 ERROR("Can't understand full path format \"%ls\".  "
  87                       "Try turning reparse point fixups off...",
  88                       extract_root_realpath);
  89                 return WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED;
  90         }
  91
  92         ret = parse_substitute_name(rpdata.substitute_name,
  93                                     rpdata.substitute_name_nbytes,
  94                                     rpdata.rptag);
  95         if (ret < 0)
  96                 return 0;
  97         stripped_nchars = ret;
  98         target = rpdata.substitute_name;
  99         target_nchars = rpdata.substitute_name_nbytes / sizeof(utf16lechar);
 100         stripped_target = target + 6;
 101         stripped_target_nchars = target_nchars - stripped_nchars;
 102
 103         new_target = alloca((6 + extract_root_realpath_nchars +
 104                              stripped_target_nchars) * sizeof(utf16lechar));
 105
 106         p = new_target;
 107         if (stripped_nchars == 6) {
 108                 /* Include \??\ prefix if it was present before */
 109                 p = wmempcpy(p, L"\\??\\", 4);
 110         }
 111
 112         /* Print name excludes the \??\ if present. */
 113         new_print_name = p;
 114         if (stripped_nchars != 0) {
 115                 /* Get drive letter from real path to extract root, if a drive
 116                  * letter was present before. */
 117                 *p++ = extract_root_realpath[0];
 118                 *p++ = extract_root_realpath[1];
 119         }
 120         /* Copy the rest of the extract root */
 121         p = wmempcpy(p, extract_root_realpath + 2, extract_root_realpath_nchars - 2);
 122
 123         /* Append the stripped target */
 124         p = wmempcpy(p, stripped_target, stripped_target_nchars);
 125         new_target_nchars = p - new_target;
 126         new_print_name_nchars = p - new_print_name;
 127
 128         if (new_target_nchars * sizeof(utf16lechar) >= REPARSE_POINT_MAX_SIZE ||
 129             new_print_name_nchars * sizeof(utf16lechar) >= REPARSE_POINT_MAX_SIZE)
 130         {
 131                 ERROR("Path names too long to do reparse point fixup!");
 132                 return WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED;
 133         }
 134         rpdata.substitute_name = new_target;
 135         rpdata.substitute_name_nbytes = new_target_nchars * sizeof(utf16lechar);
 136         rpdata.print_name = new_print_name;
 137         rpdata.print_name_nbytes = new_print_name_nchars * sizeof(utf16lechar);
 138         return make_reparse_buffer(&rpdata, rpbuf, rpbuflen_p);
 139 }
 140
 141 /* Wrapper around the FSCTL_SET_REPARSE_POINT ioctl to set the reparse data on
 142  * an extracted reparse point. */
 143 static int
 144 win32_set_reparse_data(HANDLE h,
 145                        const struct wim_inode *inode,
 146                        const struct wim_lookup_table_entry *lte,
 147                        const wchar_t *path,
 148                        struct apply_args *args)
 149 {
 150         int ret;
 151         u8 rpbuf[REPARSE_POINT_MAX_SIZE] _aligned_attribute(8);
 152         DWORD bytesReturned;
 153         u16 rpbuflen;
 154
 155         DEBUG("Setting reparse data on \"%ls\"", path);
 156
 157         ret = wim_inode_get_reparse_data(inode, rpbuf, &rpbuflen);
 158         if (ret)
 159                 return ret;
 160
 161         if (args->extract_flags & WIMLIB_EXTRACT_FLAG_RPFIX &&
 162             (inode->i_reparse_tag == WIM_IO_REPARSE_TAG_SYMLINK ||
 163              inode->i_reparse_tag == WIM_IO_REPARSE_TAG_MOUNT_POINT) &&
 164             !inode->i_not_rpfixed)
 165         {
 166                 ret = win32_extract_try_rpfix(rpbuf,
 167                                               &rpbuflen,
 168                                               args->target_realpath,
 169                                               args->target_realpath_len);
 170                 if (ret)
 171                         return WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED;
 172         }
 173
 174         /* Set the reparse data on the open file using the
 175          * FSCTL_SET_REPARSE_POINT ioctl.
 176          *
 177          * There are contradictions in Microsoft's documentation for this:
 178          *
 179          * "If hDevice was opened without specifying FILE_FLAG_OVERLAPPED,
 180          * lpOverlapped is ignored."
 181          *
 182          * --- So setting lpOverlapped to NULL is okay since it's ignored.
 183          *
 184          * "If lpOverlapped is NULL, lpBytesReturned cannot be NULL. Even when an
 185          * operation returns no output data and lpOutBuffer is NULL,
 186          * DeviceIoControl makes use of lpBytesReturned. After such an
 187          * operation, the value of lpBytesReturned is meaningless."
 188          *
 189          * --- So lpOverlapped not really ignored, as it affects another
 190          *  parameter.  This is the actual behavior: lpBytesReturned must be
 191          *  specified, even though lpBytesReturned is documented as:
 192          *
 193          *  "Not used with this operation; set to NULL."
 194          */
 195         if (!DeviceIoControl(h, FSCTL_SET_REPARSE_POINT, rpbuf,
 196                              rpbuflen,
 197                              NULL, 0,
 198                              &bytesReturned /* lpBytesReturned */,
 199                              NULL /* lpOverlapped */))
 200         {
 201                 DWORD err = GetLastError();
 202                 if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
 203                 {
 204                         args->num_soft_links_failed++;
 205                         if (args->num_soft_links_failed <= MAX_CREATE_SOFT_LINK_WARNINGS) {
 206                                 WARNING("Can't set reparse data on \"%ls\": Access denied!\n"
 207                                         "          You may be trying to extract a symbolic "
 208                                         "link without the\n"
 209                                         "          SeCreateSymbolicLink privilege, which by "
 210                                         "default non-Administrator\n"
 211                                         "          accounts do not have.", path);
 212                         }
 213                         if (args->num_hard_links_failed == MAX_CREATE_HARD_LINK_WARNINGS) {
 214                                 WARNING("Suppressing further warnings regarding failure to extract\n"
 215                                         "          reparse points due to insufficient privileges...");
 216                         }
 217                 } else {
 218                         ERROR("Failed to set reparse data on \"%ls\"", path);
 219                         win32_error(err);
 220                         if (inode->i_reparse_tag == WIM_IO_REPARSE_TAG_SYMLINK ||
 221                             inode->i_reparse_tag == WIM_IO_REPARSE_TAG_MOUNT_POINT)
 222                                 return WIMLIB_ERR_LINK;
 223                         else
 224                                 return WIMLIB_ERR_WRITE;
 225                 }
 226         }
 227         return 0;
 228 }
 229
 230 /* Wrapper around the FSCTL_SET_COMPRESSION ioctl to change the
 231  * FILE_ATTRIBUTE_COMPRESSED flag of a file or directory. */
 232 static int
 233 win32_set_compression_state(HANDLE hFile, USHORT format, const wchar_t *path)
 234 {
 235         DWORD bytesReturned;
 236         if (!DeviceIoControl(hFile, FSCTL_SET_COMPRESSION,
 237                              &format, sizeof(USHORT),
 238                              NULL, 0,
 239                              &bytesReturned, NULL))
 240         {
 241                 /* Could be a warning only, but we only call this if the volume
 242                  * supports compression.  So I'm calling this an error. */
 243                 DWORD err = GetLastError();
 244                 ERROR("Failed to set compression flag on \"%ls\"", path);
 245                 win32_error(err);
 246                 if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
 247                         return WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT;
 248                 else
 249                         return WIMLIB_ERR_WRITE;
 250         }
 251         return 0;
 252 }
 253
 254 /* Wrapper around FSCTL_SET_SPARSE ioctl to set a file as sparse. */
 255 static int
 256 win32_set_sparse(HANDLE hFile, const wchar_t *path)
 257 {
 258         DWORD bytesReturned;
 259         if (!DeviceIoControl(hFile, FSCTL_SET_SPARSE,
 260                              NULL, 0,
 261                              NULL, 0,
 262                              &bytesReturned, NULL))
 263         {
 264                 /* Could be a warning only, but we only call this if the volume
 265                  * supports sparse files.  So I'm calling this an error. */
 266                 DWORD err = GetLastError();
 267                 WARNING("Failed to set sparse flag on \"%ls\"", path);
 268                 win32_error(err);
 269                 if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
 270                         return WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT;
 271                 else
 272                         return WIMLIB_ERR_WRITE;
 273         }
 274         return 0;
 275 }
 276
 277 /*
 278  * Sets the security descriptor on an extracted file.
 279  */
 280 static int
 281 win32_set_security_data(const struct wim_inode *inode,
 282                         HANDLE hFile,
 283                         const wchar_t *path,
 284                         struct apply_args *args)
 285 {
 286         PSECURITY_DESCRIPTOR descriptor;
 287         unsigned long n;
 288         DWORD err;
 289         const struct wim_security_data *sd;
 290
 291         SECURITY_INFORMATION securityInformation = 0;
 292
 293         void *owner = NULL;
 294         void *group = NULL;
 295         ACL *dacl = NULL;
 296         ACL *sacl = NULL;
 297
 298         BOOL owner_defaulted;
 299         BOOL group_defaulted;
 300         BOOL dacl_present;
 301         BOOL dacl_defaulted;
 302         BOOL sacl_present;
 303         BOOL sacl_defaulted;
 304
 305         sd = wim_const_security_data(args->w);
 306         descriptor = sd->descriptors[inode->i_security_id];
 307
 308         GetSecurityDescriptorOwner(descriptor, &owner, &owner_defaulted);
 309         if (owner)
 310                 securityInformation |= OWNER_SECURITY_INFORMATION;
 311
 312         GetSecurityDescriptorGroup(descriptor, &group, &group_defaulted);
 313         if (group)
 314                 securityInformation |= GROUP_SECURITY_INFORMATION;
 315
 316         GetSecurityDescriptorDacl(descriptor, &dacl_present,
 317                                   &dacl, &dacl_defaulted);
 318         if (dacl)
 319                 securityInformation |= DACL_SECURITY_INFORMATION;
 320
 321         GetSecurityDescriptorSacl(descriptor, &sacl_present,
 322                                   &sacl, &sacl_defaulted);
 323         if (sacl)
 324                 securityInformation |= SACL_SECURITY_INFORMATION;
 325
 326 again:
 327         if (securityInformation == 0)
 328                 return 0;
 329         if (SetSecurityInfo(hFile, SE_FILE_OBJECT,
 330                             securityInformation, owner, group, dacl, sacl))
 331                 return 0;
 332         err = GetLastError();
 333         if (args->extract_flags & WIMLIB_EXTRACT_FLAG_STRICT_ACLS)
 334                 goto fail;
 335         switch (err) {
 336         case ERROR_PRIVILEGE_NOT_HELD:
 337                 if (securityInformation & SACL_SECURITY_INFORMATION) {
 338                         n = args->num_set_sacl_priv_notheld++;
 339                         securityInformation &= ~SACL_SECURITY_INFORMATION;
 340                         sacl = NULL;
 341                         if (n < MAX_SET_SACL_PRIV_NOTHELD_WARNINGS) {
 342                                 WARNING(
 343 "We don't have enough privileges to set the full security\n"
 344 "          descriptor on \"%ls\"!\n", path);
 345                                 if (args->num_set_sd_access_denied +
 346                                     args->num_set_sacl_priv_notheld == 1)
 347                                 {
 348                                         WARNING("%ls", apply_access_denied_msg);
 349                                 }
 350                                 WARNING("Re-trying with SACL omitted.\n", path);
 351                         } else if (n == MAX_SET_SACL_PRIV_NOTHELD_WARNINGS) {
 352                                 WARNING(
 353 "Suppressing further 'privileges not held' error messages when setting\n"
 354 "          security descriptors.");
 355                         }
 356                         goto again;
 357                 }
 358                 /* Fall through */
 359         case ERROR_INVALID_OWNER:
 360         case ERROR_ACCESS_DENIED:
 361                 n = args->num_set_sd_access_denied++;
 362                 if (n < MAX_SET_SD_ACCESS_DENIED_WARNINGS) {
 363                         WARNING("Failed to set security descriptor on \"%ls\": "
 364                                 "Access denied!\n", path);
 365                         if (args->num_set_sd_access_denied +
 366                             args->num_set_sacl_priv_notheld == 1)
 367                         {
 368                                 WARNING("%ls", apply_access_denied_msg);
 369                         }
 370                 } else if (n == MAX_SET_SD_ACCESS_DENIED_WARNINGS) {
 371                         WARNING(
 372 "Suppressing further access denied error messages when setting\n"
 373 "          security descriptors");
 374                 }
 375                 return 0;
 376         default:
 377 fail:
 378                 ERROR("Failed to set security descriptor on \"%ls\"", path);
 379                 win32_error(err);
 380                 if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
 381                         return WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT;
 382                 else
 383                         return WIMLIB_ERR_WRITE;
 384         }
 385 }
 386
 387
 388 static int
 389 win32_extract_chunk(const void *buf, size_t len, void *arg)
 390 {
 391         HANDLE hStream = arg;
 392
 393         DWORD nbytes_written;
 394         wimlib_assert(len <= 0xffffffff);
 395
 396         if (!WriteFile(hStream, buf, len, &nbytes_written, NULL) ||
 397             nbytes_written != len)
 398         {
 399                 DWORD err = GetLastError();
 400                 ERROR("WriteFile(): write error");
 401                 win32_error(err);
 402                 return WIMLIB_ERR_WRITE;
 403         }
 404         return 0;
 405 }
 406
 407 static int
 408 do_win32_extract_stream(HANDLE hStream, const struct wim_lookup_table_entry *lte)
 409 {
 410         return extract_wim_resource(lte, wim_resource_size(lte),
 411                                     win32_extract_chunk, hStream);
 412 }
 413
 414 struct win32_encrypted_extract_ctx {
 415         const struct wim_lookup_table_entry *lte;
 416         u64 offset;
 417 };
 418
 419 static DWORD WINAPI
 420 win32_encrypted_import_cb(unsigned char *data, void *_ctx,
 421                           unsigned long *len_p)
 422 {
 423         struct win32_encrypted_extract_ctx *ctx = _ctx;
 424         unsigned long len = *len_p;
 425         const struct wim_lookup_table_entry *lte = ctx->lte;
 426
 427         len = min(len, wim_resource_size(lte) - ctx->offset);
 428
 429         if (read_partial_wim_resource_into_buf(lte, len, ctx->offset, data))
 430                 return ERROR_READ_FAULT;
 431
 432         ctx->offset += len;
 433         *len_p = len;
 434         return ERROR_SUCCESS;
 435 }
 436
 437 /* Create an encrypted file and extract the raw encrypted data to it.
 438  *
 439  * @path:  Path to encrypted file to create.
 440  * @lte:   WIM lookup_table entry for the raw encrypted data.
 441  *
 442  * This is separate from do_win32_extract_stream() because the WIM is supposed
 443  * to contain the *raw* encrypted data, which needs to be extracted ("imported")
 444  * using the special APIs OpenEncryptedFileRawW(), WriteEncryptedFileRaw(), and
 445  * CloseEncryptedFileRaw().
 446  *
 447  * Returns 0 on success; nonzero on failure.
 448  */
 449 static int
 450 do_win32_extract_encrypted_stream(const wchar_t *path,
 451                                   const struct wim_lookup_table_entry *lte)
 452 {
 453         void *file_ctx;
 454         int ret;
 455
 456         DEBUG("Opening file \"%ls\" to extract raw encrypted data", path);
 457
 458         ret = OpenEncryptedFileRawW(path, CREATE_FOR_IMPORT, &file_ctx);
 459         if (ret) {
 460                 ERROR("Failed to open \"%ls\" to write raw encrypted data", path);
 461                 win32_error(ret);
 462                 return WIMLIB_ERR_OPEN;
 463         }
 464
 465         if (lte) {
 466                 struct win32_encrypted_extract_ctx ctx;
 467
 468                 ctx.lte = lte;
 469                 ctx.offset = 0;
 470                 ret = WriteEncryptedFileRaw(win32_encrypted_import_cb, &ctx, file_ctx);
 471                 if (ret == ERROR_SUCCESS) {
 472                         ret = 0;
 473                 } else {
 474                         ret = WIMLIB_ERR_WRITE;
 475                         ERROR("Failed to extract encrypted file \"%ls\"", path);
 476                 }
 477         }
 478         CloseEncryptedFileRaw(file_ctx);
 479         return ret;
 480 }
 481
 482 static bool
 483 path_is_root_of_drive(const wchar_t *path)
 484 {
 485         if (!*path)
 486                 return false;
 487
 488         if (*path != L'/' && *path != L'\\') {
 489                 if (*(path + 1) == L':')
 490                         path += 2;
 491                 else
 492                         return false;
 493         }
 494         while (*path == L'/' || *path == L'\\')
 495                 path++;
 496         return (*path == L'\0');
 497 }
 498
 499 static inline DWORD
 500 win32_mask_attributes(DWORD i_attributes)
 501 {
 502         return i_attributes & ~(FILE_ATTRIBUTE_SPARSE_FILE |
 503                                 FILE_ATTRIBUTE_COMPRESSED |
 504                                 FILE_ATTRIBUTE_REPARSE_POINT |
 505                                 FILE_ATTRIBUTE_DIRECTORY |
 506                                 FILE_ATTRIBUTE_ENCRYPTED |
 507                                 FILE_FLAG_DELETE_ON_CLOSE |
 508                                 FILE_FLAG_NO_BUFFERING |
 509                                 FILE_FLAG_OPEN_NO_RECALL |
 510                                 FILE_FLAG_OVERLAPPED |
 511                                 FILE_FLAG_RANDOM_ACCESS |
 512                                 /*FILE_FLAG_SESSION_AWARE |*/
 513                                 FILE_FLAG_SEQUENTIAL_SCAN |
 514                                 FILE_FLAG_WRITE_THROUGH);
 515 }
 516
 517 static inline DWORD
 518 win32_get_create_flags_and_attributes(DWORD i_attributes)
 519 {
 520         /*
 521          * Some attributes cannot be set by passing them to CreateFile().  In
 522          * particular:
 523          *
 524          * FILE_ATTRIBUTE_DIRECTORY:
 525          *   CreateDirectory() must be called instead of CreateFile().
 526          *
 527          * FILE_ATTRIBUTE_SPARSE_FILE:
 528          *   Needs an ioctl.
 529          *   See: win32_set_sparse().
 530          *
 531          * FILE_ATTRIBUTE_COMPRESSED:
 532          *   Not clear from the documentation, but apparently this needs an
 533          *   ioctl as well.
 534          *   See: win32_set_compressed().
 535          *
 536          * FILE_ATTRIBUTE_REPARSE_POINT:
 537          *   Needs an ioctl, with the reparse data specified.
 538          *   See: win32_set_reparse_data().
 539          *
 540          * In addition, clear any file flags in the attributes that we don't
 541          * want, but also specify FILE_FLAG_OPEN_REPARSE_POINT and
 542          * FILE_FLAG_BACKUP_SEMANTICS as we are a backup application.
 543          */
 544         return win32_mask_attributes(i_attributes) |
 545                 FILE_FLAG_OPEN_REPARSE_POINT |
 546                 FILE_FLAG_BACKUP_SEMANTICS;
 547 }
 548
 549 /* Set compression and/or sparse attributes on a stream, if supported by the
 550  * volume. */
 551 static int
 552 win32_set_special_stream_attributes(HANDLE hFile, const struct wim_inode *inode,
 553                                     struct wim_lookup_table_entry *unnamed_stream_lte,
 554                                     const wchar_t *path, unsigned vol_flags)
 555 {
 556         int ret;
 557
 558         if (inode->i_attributes & FILE_ATTRIBUTE_COMPRESSED) {
 559                 if (vol_flags & FILE_FILE_COMPRESSION) {
 560                         ret = win32_set_compression_state(hFile,
 561                                                           COMPRESSION_FORMAT_DEFAULT,
 562                                                           path);
 563                         if (ret)
 564                                 return ret;
 565                 } else {
 566                         DEBUG("Cannot set compression attribute on \"%ls\": "
 567                               "volume does not support transparent compression",
 568                               path);
 569                 }
 570         }
 571
 572         if (inode->i_attributes & FILE_ATTRIBUTE_SPARSE_FILE) {
 573                 if (vol_flags & FILE_SUPPORTS_SPARSE_FILES) {
 574                         DEBUG("Setting sparse flag on \"%ls\"", path);
 575                         ret = win32_set_sparse(hFile, path);
 576                         if (ret)
 577                                 return ret;
 578                 } else {
 579                         DEBUG("Cannot set sparse attribute on \"%ls\": "
 580                               "volume does not support sparse files",
 581                               path);
 582                 }
 583         }
 584         return 0;
 585 }
 586
 587 /* Pre-create directories; extract encrypted streams */
 588 static int
 589 win32_begin_extract_unnamed_stream(const struct wim_inode *inode,
 590                                    const struct wim_lookup_table_entry *lte,
 591                                    const wchar_t *path,
 592                                    DWORD *creationDisposition_ret,
 593                                    unsigned int vol_flags)
 594 {
 595         DWORD err;
 596         int ret;
 597
 598         /* Directories must be created with CreateDirectoryW().  Then the call
 599          * to CreateFileW() will merely open the directory that was already
 600          * created rather than creating a new file. */
 601         if (inode->i_attributes & FILE_ATTRIBUTE_DIRECTORY &&
 602             !path_is_root_of_drive(path)) {
 603                 if (!CreateDirectoryW(path, NULL)) {
 604                         err = GetLastError();
 605                         if (err != ERROR_ALREADY_EXISTS) {
 606                                 ERROR("Failed to create directory \"%ls\"",
 607                                       path);
 608                                 win32_error(err);
 609                                 return WIMLIB_ERR_MKDIR;
 610                         }
 611                 }
 612                 DEBUG("Created directory \"%ls\"", path);
 613                 *creationDisposition_ret = OPEN_EXISTING;
 614         }
 615         if (inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED &&
 616             vol_flags & FILE_SUPPORTS_ENCRYPTION)
 617         {
 618                 if (inode->i_attributes & FILE_ATTRIBUTE_DIRECTORY) {
 619                         unsigned remaining_sharing_violations = 100;
 620                         while (!EncryptFile(path)) {
 621                                 if (remaining_sharing_violations &&
 622                                     err == ERROR_SHARING_VIOLATION)
 623                                 {
 624                                         WARNING("Couldn't encrypt directory \"%ls\" "
 625                                                 "due to sharing violation; re-trying "
 626                                                 "after 100 ms", path);
 627                                         Sleep(100);
 628                                         remaining_sharing_violations--;
 629                                 } else {
 630                                         err = GetLastError();
 631                                         ERROR("Failed to encrypt directory \"%ls\"",
 632                                               path);
 633                                         win32_error(err);
 634                                         return WIMLIB_ERR_WRITE;
 635                                 }
 636                         }
 637                 } else {
 638                         ret = do_win32_extract_encrypted_stream(path, lte);
 639                         if (ret)
 640                                 return ret;
 641                         DEBUG("Extracted encrypted file \"%ls\"", path);
 642                 }
 643                 *creationDisposition_ret = OPEN_EXISTING;
 644         }
 645
 646         /* Set file attributes if we created the file.  Otherwise, we haven't
 647          * created the file set and we will set the attributes in the call to
 648          * CreateFileW().
 649          *
 650          * The FAT filesystem does not let you change the attributes of the root
 651          * directory, so treat that as a special case and do not set attributes.
 652          * */
 653         if (*creationDisposition_ret == OPEN_EXISTING &&
 654             !path_is_root_of_drive(path))
 655         {
 656                 if (!SetFileAttributesW(path,
 657                                         win32_mask_attributes(inode->i_attributes)))
 658                 {
 659                         err = GetLastError();
 660                         ERROR("Failed to set attributes on \"%ls\"", path);
 661                         win32_error(err);
 662                         return WIMLIB_ERR_WRITE;
 663                 }
 664         }
 665         return 0;
 666 }
 667
 668 /* Set security descriptor and extract stream data or reparse data (skip the
 669  * unnamed data stream of encrypted files, which was already extracted). */
 670 static int
 671 win32_finish_extract_stream(HANDLE h, const struct wim_dentry *dentry,
 672                             const struct wim_lookup_table_entry *lte,
 673                             const wchar_t *stream_path,
 674                             const wchar_t *stream_name_utf16,
 675                             struct apply_args *args)
 676 {
 677         int ret = 0;
 678         const struct wim_inode *inode = dentry->d_inode;
 679         if (stream_name_utf16 == NULL) {
 680                 /* Unnamed stream. */
 681
 682                 /* Set security descriptor, unless the extract_flags indicate
 683                  * not to or the volume does not supported it.  Note that this
 684                  * is only done when the unnamed stream is being extracted, as
 685                  * security descriptors are per-file and not per-stream. */
 686                 if (inode->i_security_id >= 0 &&
 687                     !(args->extract_flags & WIMLIB_EXTRACT_FLAG_NO_ACLS)
 688                     && (args->vol_flags & FILE_PERSISTENT_ACLS))
 689                 {
 690                         ret = win32_set_security_data(inode, h, stream_path, args);
 691                         if (ret)
 692                                 return ret;
 693                 }
 694
 695                 /* Handle reparse points.  The data for them needs to be set
 696                  * using a special ioctl.  Note that the reparse point may have
 697                  * been created using CreateFileW() in the case of
 698                  * non-directories or CreateDirectoryW() in the case of
 699                  * directories; but the ioctl works either way.  Also, it is
 700                  * only this step that actually sets the
 701                  * FILE_ATTRIBUTE_REPARSE_POINT, as it is not valid to set it
 702                  * using SetFileAttributesW() or CreateFileW().
 703                  *
 704                  * If the volume does not support reparse points we simply
 705                  * ignore the reparse data.  (N.B. the code currently doesn't
 706                  * actually reach this case because reparse points are skipped
 707                  * entirely on such volumes.) */
 708                 if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT) {
 709                         if (args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS) {
 710                                 ret = win32_set_reparse_data(h, inode,
 711                                                              lte, stream_path,
 712                                                              args);
 713                                 if (ret)
 714                                         return ret;
 715                         } else {
 716                                 DEBUG("Cannot set reparse data on \"%ls\": volume "
 717                                       "does not support reparse points", stream_path);
 718                         }
 719                 } else if (lte != NULL &&
 720                            !(args->vol_flags & FILE_SUPPORTS_ENCRYPTION &&
 721                              inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED))
 722                 {
 723                         /* Extract the data of the unnamed stream, unless the
 724                          * lookup table entry is NULL (indicating an empty
 725                          * stream for which no data needs to be extracted), or
 726                          * the stream is encrypted and therefore was already
 727                          * extracted as a special case. */
 728                         ret = do_win32_extract_stream(h, lte);
 729                         if (ret)
 730                                 return ret;
 731                 }
 732
 733                 if (dentry_has_short_name(dentry))
 734                         SetFileShortNameW(h, dentry->short_name);
 735                 else if (running_on_windows_7_or_later())
 736                         SetFileShortNameW(h, L"");
 737         } else {
 738                 /* Extract the data for a named data stream. */
 739                 if (lte != NULL) {
 740                         DEBUG("Extracting named data stream \"%ls\" (len = %"PRIu64")",
 741                               stream_path, wim_resource_size(lte));
 742                         ret = do_win32_extract_stream(h, lte);
 743                 }
 744         }
 745         return ret;
 746 }
 747
 748 static int
 749 win32_decrypt_file(HANDLE open_handle, const wchar_t *path)
 750 {
 751         DWORD err;
 752         /* We cannot call DecryptFileW() while there is an open handle to the
 753          * file.  So close it first. */
 754         if (!CloseHandle(open_handle)) {
 755                 err = GetLastError();
 756                 ERROR("Failed to close handle for \"%ls\"", path);
 757                 win32_error(err);
 758                 return WIMLIB_ERR_WRITE;
 759         }
 760         if (!DecryptFileW(path, 0 /* reserved parameter; set to 0 */)) {
 761                 err = GetLastError();
 762                 ERROR("Failed to decrypt file \"%ls\"", path);
 763                 win32_error(err);
 764                 return WIMLIB_ERR_WRITE;
 765         }
 766         return 0;
 767 }
 768
 769 /*
 770  * Create and extract a stream to a file, or create a directory, using the
 771  * Windows API.
 772  *
 773  * This handles reparse points, directories, alternate data streams, encrypted
 774  * files, compressed files, etc.
 775  *
 776  * @dentry: WIM dentry for the file or directory being extracted.
 777  *
 778  * @path:  Path to extract the file to.
 779  *
 780  * @stream_name_utf16:
 781  *         Name of the stream, or NULL if the stream is unnamed.  This will
 782  *         be called with a NULL stream_name_utf16 before any non-NULL
 783  *         stream_name_utf16's.
 784  *
 785  * @lte:   WIM lookup table entry for the stream.  May be NULL to indicate
 786  *         a stream of length 0.
 787  *
 788  * @args:  Additional apply context, including flags indicating supported
 789  *         volume features.
 790  *
 791  * Returns 0 on success; nonzero on failure.
 792  */
 793 static int
 794 win32_extract_stream(const struct wim_dentry *dentry,
 795                      const wchar_t *path,
 796                      const wchar_t *stream_name_utf16,
 797                      struct wim_lookup_table_entry *lte,
 798                      struct apply_args *args)
 799 {
 800         wchar_t *stream_path;
 801         HANDLE h;
 802         int ret;
 803         DWORD err;
 804         DWORD creationDisposition = CREATE_ALWAYS;
 805         DWORD requestedAccess;
 806         BY_HANDLE_FILE_INFORMATION file_info;
 807         unsigned remaining_sharing_violations = 1000;
 808         const struct wim_inode *inode = dentry->d_inode;
 809
 810         if (stream_name_utf16) {
 811                 /* Named stream.  Create a buffer that contains the UTF-16LE
 812                  * string [./]path:stream_name_utf16.  This is needed to
 813                  * create and open the stream using CreateFileW().  I'm not
 814                  * aware of any other APIs to do this.  Note: the '$DATA' suffix
 815                  * seems to be unneeded.  Additional note: a "./" prefix needs
 816                  * to be added when the path is not absolute to avoid ambiguity
 817                  * with drive letters. */
 818                 size_t stream_path_nchars;
 819                 size_t path_nchars;
 820                 size_t stream_name_nchars;
 821                 const wchar_t *prefix;
 822
 823                 path_nchars = wcslen(path);
 824                 stream_name_nchars = wcslen(stream_name_utf16);
 825                 stream_path_nchars = path_nchars + 1 + stream_name_nchars;
 826                 if (path[0] != cpu_to_le16(L'\0') &&
 827                     path[0] != cpu_to_le16(L'/') &&
 828                     path[0] != cpu_to_le16(L'\\') &&
 829                     path[1] != cpu_to_le16(L':'))
 830                 {
 831                         prefix = L"./";
 832                         stream_path_nchars += 2;
 833                 } else {
 834                         prefix = L"";
 835                 }
 836                 stream_path = alloca((stream_path_nchars + 1) * sizeof(wchar_t));
 837                 swprintf(stream_path, L"%ls%ls:%ls",
 838                          prefix, path, stream_name_utf16);
 839         } else {
 840                 /* Unnamed stream; its path is just the path to the file itself.
 841                  * */
 842                 stream_path = (wchar_t*)path;
 843
 844                 ret = win32_begin_extract_unnamed_stream(inode, lte, path,
 845                                                          &creationDisposition,
 846                                                          args->vol_flags);
 847                 if (ret)
 848                         goto fail;
 849         }
 850
 851         DEBUG("Opening \"%ls\"", stream_path);
 852         /* DELETE access is needed for SetFileShortNameW(), for some reason. */
 853         requestedAccess = GENERIC_READ | GENERIC_WRITE | DELETE |
 854                           ACCESS_SYSTEM_SECURITY;
 855 try_open_again:
 856         /* Open the stream to be extracted.  Depending on what we have set
 857          * creationDisposition to, we may be creating this for the first time,
 858          * or we may be opening on existing stream we already created using
 859          * CreateDirectoryW() or OpenEncryptedFileRawW(). */
 860         h = CreateFileW(stream_path,
 861                         requestedAccess,
 862                         FILE_SHARE_READ,
 863                         NULL,
 864                         creationDisposition,
 865                         win32_get_create_flags_and_attributes(inode->i_attributes),
 866                         NULL);
 867         if (h == INVALID_HANDLE_VALUE) {
 868                 err = GetLastError();
 869                 if (err == ERROR_ACCESS_DENIED &&
 870                     path_is_root_of_drive(stream_path))
 871                 {
 872                         ret = 0;
 873                         goto out;
 874                 }
 875                 if ((err == ERROR_PRIVILEGE_NOT_HELD ||
 876                      err == ERROR_ACCESS_DENIED) &&
 877                     (requestedAccess & ACCESS_SYSTEM_SECURITY))
 878                 {
 879                         /* Try opening the file again without privilege to
 880                          * modify SACL. */
 881                         requestedAccess &= ~ACCESS_SYSTEM_SECURITY;
 882                         goto try_open_again;
 883                 }
 884                 if (err == ERROR_SHARING_VIOLATION) {
 885                         if (remaining_sharing_violations) {
 886                                 --remaining_sharing_violations;
 887                                 /* This can happen when restoring encrypted directories
 888                                  * for some reason.  Probably a bug in EncryptFile(). */
 889                                 WARNING("Couldn't open \"%ls\" due to sharing violation; "
 890                                         "re-trying after 100ms", stream_path);
 891                                 Sleep(100);
 892                                 goto try_open_again;
 893                         } else {
 894                                 ERROR("Too many sharing violations; giving up...");
 895                         }
 896                 } else {
 897                         if (creationDisposition == OPEN_EXISTING)
 898                                 ERROR("Failed to open \"%ls\"", stream_path);
 899                         else
 900                                 ERROR("Failed to create \"%ls\"", stream_path);
 901                         win32_error(err);
 902                 }
 903                 ret = WIMLIB_ERR_OPEN;
 904                 goto fail;
 905         }
 906
 907         /* Check the attributes of the file we just opened, and remove
 908          * encryption or compression if either was set by default but is not
 909          * supposed to be set based on the WIM inode attributes. */
 910         if (!GetFileInformationByHandle(h, &file_info)) {
 911                 err = GetLastError();
 912                 ERROR("Failed to get attributes of \"%ls\"", stream_path);
 913                 win32_error(err);
 914                 ret = WIMLIB_ERR_STAT;
 915                 goto fail_close_handle;
 916         }
 917
 918         /* Remove encryption? */
 919         if (file_info.dwFileAttributes & FILE_ATTRIBUTE_ENCRYPTED &&
 920             !(inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED))
 921         {
 922                 /* File defaulted to encrypted due to being in an encrypted
 923                  * directory, but is not actually supposed to be encrypted.
 924                  *
 925                  * This is a workaround, because I'm not aware of any way to
 926                  * directly (e.g. with CreateFileW()) create an unencrypted file
 927                  * in a directory with FILE_ATTRIBUTE_ENCRYPTED set. */
 928                 ret = win32_decrypt_file(h, stream_path);
 929                 if (ret)
 930                         goto fail; /* win32_decrypt_file() closed the handle. */
 931                 creationDisposition = OPEN_EXISTING;
 932                 goto try_open_again;
 933         }
 934
 935         /* Remove compression? */
 936         if (file_info.dwFileAttributes & FILE_ATTRIBUTE_COMPRESSED &&
 937             !(inode->i_attributes & FILE_ATTRIBUTE_COMPRESSED))
 938         {
 939                 /* Similar to the encrypted case, above, if the file defaulted
 940                  * to compressed due to being in an compressed directory, but is
 941                  * not actually supposed to be compressed, explicitly set the
 942                  * compression format to COMPRESSION_FORMAT_NONE. */
 943                 ret = win32_set_compression_state(h, COMPRESSION_FORMAT_NONE,
 944                                                   stream_path);
 945                 if (ret)
 946                         goto fail_close_handle;
 947         }
 948
 949         /* Set compression and/or sparse attributes if needed */
 950         ret = win32_set_special_stream_attributes(h, inode, lte, path,
 951                                                   args->vol_flags);
 952
 953         if (ret)
 954                 goto fail_close_handle;
 955
 956         /* At this point we have at least created the needed stream with the
 957          * appropriate attributes.  We have yet to set the appropriate security
 958          * descriptor and actually extract the stream data (other than for
 959          * extracted files, which were already extracted).
 960          * win32_finish_extract_stream() handles these additional steps. */
 961         ret = win32_finish_extract_stream(h, dentry, lte, stream_path,
 962                                           stream_name_utf16, args);
 963         if (ret)
 964                 goto fail_close_handle;
 965
 966         /* Done extracting the stream.  Close the handle and return. */
 967         DEBUG("Closing \"%ls\"", stream_path);
 968         if (!CloseHandle(h)) {
 969                 err = GetLastError();
 970                 ERROR("Failed to close \"%ls\"", stream_path);
 971                 win32_error(err);
 972                 ret = WIMLIB_ERR_WRITE;
 973                 goto fail;
 974         }
 975         ret = 0;
 976         goto out;
 977 fail_close_handle:
 978         CloseHandle(h);
 979 fail:
 980         ERROR("Error extracting \"%ls\"", stream_path);
 981 out:
 982         return ret;
 983 }
 984
 985 /*
 986  * Creates a file, directory, or reparse point and extracts all streams to it
 987  * (unnamed data stream and/or reparse point stream, plus any alternate data
 988  * streams).  Handles sparse, compressed, and/or encrypted files.
 989  *
 990  * @dentry:     WIM dentry for this file or directory.
 991  * @path:       UTF-16LE external path to extract the inode to.
 992  * @args:       Additional extraction context.
 993  *
 994  * Returns 0 on success; nonzero on failure.
 995  */
 996 static int
 997 win32_extract_streams(const struct wim_dentry *dentry,
 998                       const wchar_t *path, struct apply_args *args)
 999 {
1000         struct wim_lookup_table_entry *unnamed_lte;
1001         int ret;
1002         const struct wim_inode *inode = dentry->d_inode;
1003
1004         /* First extract the unnamed stream. */
1005
1006         unnamed_lte = inode_unnamed_lte_resolved(inode);
1007         ret = win32_extract_stream(dentry, path, NULL, unnamed_lte, args);
1008         if (ret)
1009                 goto out;
1010
1011         /* Extract any named streams, if supported by the volume. */
1012
1013         if (!(args->vol_flags & FILE_NAMED_STREAMS))
1014                 goto out;
1015         for (u16 i = 0; i < inode->i_num_ads; i++) {
1016                 const struct wim_ads_entry *ads_entry = &inode->i_ads_entries[i];
1017
1018                 /* Skip the unnamed stream if it's in the ADS entries (we
1019                  * already extracted it...) */
1020                 if (ads_entry->stream_name_nbytes == 0)
1021                         continue;
1022
1023                 /* Skip special UNIX data entries (see documentation for
1024                  * WIMLIB_ADD_FLAG_UNIX_DATA) */
1025                 if (ads_entry->stream_name_nbytes == WIMLIB_UNIX_DATA_TAG_UTF16LE_NBYTES
1026                     && !memcmp(ads_entry->stream_name,
1027                                WIMLIB_UNIX_DATA_TAG_UTF16LE,
1028                                WIMLIB_UNIX_DATA_TAG_UTF16LE_NBYTES))
1029                         continue;
1030
1031                 /* Extract the named stream */
1032                 ret = win32_extract_stream(dentry,
1033                                            path,
1034                                            ads_entry->stream_name,
1035                                            ads_entry->lte,
1036                                            args);
1037                 if (ret)
1038                         break;
1039         }
1040 out:
1041         return ret;
1042 }
1043
1044 static int
1045 dentry_clear_inode_visited(struct wim_dentry *dentry, void *_ignore)
1046 {
1047         dentry->d_inode->i_visited = 0;
1048         return 0;
1049 }
1050
1051 static int
1052 dentry_get_features(struct wim_dentry *dentry, void *_features_p)
1053 {
1054         DWORD features = 0;
1055         DWORD *features_p = _features_p;
1056         struct wim_inode *inode = dentry->d_inode;
1057
1058         if (inode->i_visited) {
1059                 features |= FILE_SUPPORTS_HARD_LINKS;
1060         } else {
1061                 inode->i_visited = 1;
1062                 if (inode->i_attributes & FILE_ATTRIBUTE_SPARSE_FILE)
1063                         features |= FILE_SUPPORTS_SPARSE_FILES;
1064                 if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT)
1065                         features |= FILE_SUPPORTS_REPARSE_POINTS;
1066                 for (unsigned i = 0; i < inode->i_num_ads; i++)
1067                         if (inode->i_ads_entries[i].stream_name_nbytes)
1068                                 features |= FILE_NAMED_STREAMS;
1069                 if (inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED)
1070                         features |= FILE_SUPPORTS_ENCRYPTION;
1071                 if (inode->i_attributes & FILE_ATTRIBUTE_COMPRESSED)
1072                         features |= FILE_FILE_COMPRESSION;
1073                 if (inode->i_security_id != -1)
1074                         features |= FILE_PERSISTENT_ACLS;
1075         }
1076         *features_p |= features;
1077         return 0;
1078 }
1079
1080 /* If not done already, load the supported feature flags for the volume onto
1081  * which the image is being extracted, and warn the user about any missing
1082  * features that could be important. */
1083 static int
1084 win32_check_vol_flags(const wchar_t *output_path,
1085                       struct wim_dentry *root, struct apply_args *args)
1086 {
1087         DWORD dentry_features = 0;
1088         DWORD missing_features;
1089
1090         if (args->have_vol_flags)
1091                 return 0;
1092
1093         for_dentry_in_tree(root, dentry_clear_inode_visited, NULL);
1094         for_dentry_in_tree(root, dentry_get_features, &dentry_features);
1095
1096         win32_get_vol_flags(output_path, &args->vol_flags);
1097         args->have_vol_flags = true;
1098
1099         missing_features = dentry_features & ~args->vol_flags;
1100
1101         /* Warn the user about data that may not be extracted. */
1102         if (missing_features & FILE_SUPPORTS_SPARSE_FILES)
1103                 WARNING("Volume does not support sparse files!\n"
1104                         "          Sparse files will be extracted as non-sparse.");
1105         if (missing_features & FILE_SUPPORTS_REPARSE_POINTS)
1106                 WARNING("Volume does not support reparse points!\n"
1107                         "          Reparse point data will not be extracted.");
1108         if (missing_features & FILE_NAMED_STREAMS) {
1109                 WARNING("Volume does not support named data streams!\n"
1110                         "          Named data streams will not be extracted.");
1111         }
1112         if (missing_features & FILE_SUPPORTS_ENCRYPTION) {
1113                 WARNING("Volume does not support encryption!\n"
1114                         "          Encrypted files will be extracted as raw data.");
1115         }
1116         if (missing_features & FILE_FILE_COMPRESSION) {
1117                 WARNING("Volume does not support transparent compression!\n"
1118                         "          Compressed files will be extracted as non-compressed.");
1119         }
1120         if (missing_features & FILE_PERSISTENT_ACLS) {
1121                 if (args->extract_flags & WIMLIB_EXTRACT_FLAG_STRICT_ACLS) {
1122                         ERROR("Strict ACLs requested, but the volume does not "
1123                               "support ACLs!");
1124                         return WIMLIB_ERR_VOLUME_LACKS_FEATURES;
1125                 } else {
1126                         WARNING("Volume does not support persistent ACLS!\n"
1127                                 "          File permissions will not be extracted.");
1128                 }
1129         }
1130         if (running_on_windows_7_or_later() &&
1131             (missing_features & FILE_SUPPORTS_HARD_LINKS))
1132         {
1133                 WARNING("Volume does not support hard links!\n"
1134                         "          Hard links will be extracted as duplicate files.");
1135         }
1136         return 0;
1137 }
1138
1139 /*
1140  * Try extracting a hard link.
1141  *
1142  * @output_path:  Path to link to be extracted.
1143  *
1144  * @inode:        WIM inode that the link is to; inode->i_extracted_file
1145  *                the path to a name of the file that has already been
1146  *                extracted (we use this to create the hard link).
1147  *
1148  * @args:         Additional apply context, used here to keep track of
1149  *                the number of times creating a hard link failed due to
1150  *                ERROR_INVALID_FUNCTION.  This error should indicate that hard
1151  *                links are not supported by the volume, and we would like to
1152  *                warn the user a few times, but not too many times.
1153  *
1154  * Returns 0 if the hard link was successfully extracted.  Returns
1155  * WIMLIB_ERR_LINK (> 0) if an error occurred, other than hard links possibly
1156  * being unsupported by the volume.  Returns a negative value if creating the
1157  * hard link failed due to ERROR_INVALID_FUNCTION.
1158  */
1159 static int
1160 win32_try_hard_link(const wchar_t *output_path, const struct wim_inode *inode,
1161                     struct apply_args *args)
1162 {
1163         DWORD err;
1164
1165         /* There is a volume flag for this (FILE_SUPPORTS_HARD_LINKS),
1166          * but it's only available on Windows 7 and later.
1167          *
1168          * Otherwise, CreateHardLinkW() will apparently return
1169          * ERROR_INVALID_FUNCTION if the volume does not support hard links. */
1170
1171         DEBUG("Creating hard link \"%ls => %ls\"",
1172               output_path, inode->i_extracted_file);
1173
1174         if (running_on_windows_7_or_later() &&
1175             !(args->vol_flags & FILE_SUPPORTS_HARD_LINKS))
1176                 goto hard_links_unsupported;
1177
1178         if (CreateHardLinkW(output_path, inode->i_extracted_file, NULL))
1179                 return 0;
1180
1181         err = GetLastError();
1182         if (err != ERROR_INVALID_FUNCTION) {
1183                 ERROR("Can't create hard link \"%ls => %ls\"",
1184                       output_path, inode->i_extracted_file);
1185                 win32_error(err);
1186                 return WIMLIB_ERR_LINK;
1187         }
1188 hard_links_unsupported:
1189         args->num_hard_links_failed++;
1190         if (args->num_hard_links_failed <= MAX_CREATE_HARD_LINK_WARNINGS) {
1191                 if (running_on_windows_7_or_later())
1192                 {
1193                         WARNING("Extracting duplicate copy of \"%ls\" "
1194                                 "rather than hard link", output_path);
1195                 } else {
1196                         WARNING("Can't create hard link \"%ls\" => \"%ls\":\n"
1197                                 "          Volume does not support hard links!\n"
1198                                 "          Falling back to extracting a copy of the file.",
1199                                 output_path, inode->i_extracted_file);
1200                 }
1201         }
1202         if (args->num_hard_links_failed == MAX_CREATE_HARD_LINK_WARNINGS)
1203                 WARNING("Suppressing further hard linking warnings...");
1204         return -1;
1205 }
1206
1207 /* Extract a file, directory, reparse point, or hard link to an
1208  * already-extracted file using the Win32 API */
1209 int
1210 win32_do_apply_dentry(const wchar_t *output_path,
1211                       size_t output_path_num_chars,
1212                       struct wim_dentry *dentry,
1213                       struct apply_args *args)
1214 {
1215         int ret;
1216         struct wim_inode *inode = dentry->d_inode;
1217
1218         ret = win32_check_vol_flags(output_path, dentry, args);
1219         if (ret)
1220                 return ret;
1221         if (inode->i_nlink > 1 && inode->i_extracted_file != NULL) {
1222                 /* Linked file, with another name already extracted.  Create a
1223                  * hard link. */
1224                 ret = win32_try_hard_link(output_path, inode, args);
1225                 if (ret >= 0)
1226                         return ret;
1227                 /* Negative return value from win32_try_hard_link() indicates
1228                  * that hard links are probably not supported by the volume.
1229                  * Fall back to extracting a copy of the file. */
1230         }
1231
1232         /* If this is a reparse point and the volume does not support reparse
1233          * points, just skip it completely. */
1234         if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT &&
1235             !(args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS))
1236         {
1237                 WARNING("Not extracting reparse point \"%ls\"", output_path);
1238         } else {
1239                 /* Create the file, directory, or reparse point, and extract the
1240                  * data streams. */
1241                 ret = win32_extract_streams(dentry, output_path, args);
1242                 if (ret)
1243                         return ret;
1244         }
1245         if (inode->i_extracted_file == NULL) {
1246                 const struct wim_lookup_table_entry *lte;
1247
1248                 /* Tally bytes extracted, including all alternate data streams,
1249                  * unless we extracted a hard link (or, at least extracted a
1250                  * name that was supposed to be a hard link) */
1251                 for (unsigned i = 0; i <= inode->i_num_ads; i++) {
1252                         lte = inode_stream_lte_resolved(inode, i);
1253                         if (lte)
1254                                 args->progress.extract.completed_bytes +=
1255                                                         wim_resource_size(lte);
1256                 }
1257                 if (inode->i_nlink > 1) {
1258                         /* Save extracted path for a later call to
1259                          * CreateHardLinkW() if this inode has multiple links.
1260                          * */
1261                         inode->i_extracted_file = WSTRDUP(output_path);
1262                         if (!inode->i_extracted_file)
1263                                 return WIMLIB_ERR_NOMEM;
1264                 }
1265         }
1266         return 0;
1267 }
1268
1269 /* Set timestamps on an extracted file using the Win32 API */
1270 int
1271 win32_do_apply_dentry_timestamps(const wchar_t *path,
1272                                  size_t path_num_chars,
1273                                  struct wim_dentry *dentry,
1274                                  struct apply_args *args)
1275 {
1276         DWORD err;
1277         HANDLE h;
1278         const struct wim_inode *inode = dentry->d_inode;
1279
1280         if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT &&
1281             !(args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS))
1282         {
1283                 /* Skip reparse points not extracted */
1284                 return 0;
1285         }
1286
1287         /* Windows doesn't let you change the timestamps of the root directory
1288          * (at least on FAT, which is dumb but expected since FAT doesn't store
1289          * any metadata about the root directory...) */
1290         if (path_is_root_of_drive(path))
1291                 return 0;
1292
1293         DEBUG("Opening \"%ls\" to set timestamps", path);
1294         h = win32_open_existing_file(path, FILE_WRITE_ATTRIBUTES);
1295         if (h == INVALID_HANDLE_VALUE) {
1296                 err = GetLastError();
1297                 goto fail;
1298         }
1299
1300         FILETIME creationTime = {.dwLowDateTime = inode->i_creation_time & 0xffffffff,
1301                                  .dwHighDateTime = inode->i_creation_time >> 32};
1302         FILETIME lastAccessTime = {.dwLowDateTime = inode->i_last_access_time & 0xffffffff,
1303                                   .dwHighDateTime = inode->i_last_access_time >> 32};
1304         FILETIME lastWriteTime = {.dwLowDateTime = inode->i_last_write_time & 0xffffffff,
1305                                   .dwHighDateTime = inode->i_last_write_time >> 32};
1306
1307         DEBUG("Calling SetFileTime() on \"%ls\"", path);
1308         if (!SetFileTime(h, &creationTime, &lastAccessTime, &lastWriteTime)) {
1309                 err = GetLastError();
1310                 CloseHandle(h);
1311                 goto fail;
1312         }
1313         DEBUG("Closing \"%ls\"", path);
1314         if (!CloseHandle(h)) {
1315                 err = GetLastError();
1316                 goto fail;
1317         }
1318         goto out;
1319 fail:
1320         /* Only warn if setting timestamps failed; still return 0. */
1321         WARNING("Can't set timestamps on \"%ls\"", path);
1322         win32_error(err);
1323 out:
1324         return 0;
1325 }
1326
1327 #endif /* __WIN32__ */