]> wimlib.net Git - wimlib/blob - src/resource.c
NTFS capture updates
[wimlib] / src / resource.c
1 /*
2  * resource.c
3  *
4  * Read uncompressed and compressed metadata and file resources.
5  */
6
7 /*
8  * Copyright (C) 2010 Carl Thijssen
9  * Copyright (C) 2012 Eric Biggers
10  *
11  * This file is part of wimlib, a library for working with WIM files.
12  *
13  * wimlib is free software; you can redistribute it and/or modify it under the
14  * terms of the GNU Lesser General Public License as published by the Free
15  * Software Foundation; either version 2.1 of the License, or (at your option)
16  * any later version.
17  *
18  * wimlib is distributed in the hope that it will be useful, but WITHOUT ANY
19  * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
20  * A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
21  * details.
22  *
23  * You should have received a copy of the GNU Lesser General Public License
24  * along with wimlib; if not, see http://www.gnu.org/licenses/.
25  */
26
27 #include "wimlib_internal.h"
28 #include "lookup_table.h"
29 #include "io.h"
30 #include "lzx.h"
31 #include "xpress.h"
32 #include "sha1.h"
33 #include "dentry.h"
34 #include "config.h"
35 #include <unistd.h>
36 #include <errno.h>
37 #include <alloca.h>
38
39 #ifdef WITH_NTFS_3G
40 #include <ntfs-3g/attrib.h>
41 #include <ntfs-3g/inode.h>
42 #include <ntfs-3g/dir.h>
43 #endif
44
45 /* 
46  * Reads all or part of a compressed resource into an in-memory buffer.
47  *
48  * @fp:                 The FILE* for the WIM file.
49  * @resource_compressed_size:    The compressed size of the resource.  
50  * @resource_uncompressed_size:  The uncompressed size of the resource.
51  * @resource_offset:             The offset of the start of the resource from
52  *                                      the start of the stream @fp.
53  * @resource_ctype:     The compression type of the resource. 
54  * @len:                The number of bytes of uncompressed data to read from
55  *                              the resource.
56  * @offset:             The offset of the bytes to read within the uncompressed
57  *                              resource.
58  * @contents_len:       An array into which the uncompressed data is written.
59  *                              It must be at least @len bytes long.
60  *
61  * Returns zero on success, nonzero on failure.
62  */
63 static int read_compressed_resource(FILE *fp, u64 resource_compressed_size, 
64                                     u64 resource_uncompressed_size, 
65                                     u64 resource_offset, int resource_ctype, 
66                                     u64 len, u64 offset, u8  contents_ret[])
67 {
68
69         DEBUG2("comp size = %"PRIu64", uncomp size = %"PRIu64", "
70                "res offset = %"PRIu64"",
71                resource_compressed_size,
72                resource_uncompressed_size,
73                resource_offset);
74         DEBUG2("resource_ctype = %s, len = %"PRIu64", offset = %"PRIu64"",
75                wimlib_get_compression_type_string(resource_ctype), len, offset);
76         /* Trivial case */
77         if (len == 0)
78                 return 0;
79
80         int (*decompress)(const void *, uint, void *, uint);
81         /* Set the appropriate decompress function. */
82         if (resource_ctype == WIM_COMPRESSION_TYPE_LZX)
83                 decompress = lzx_decompress;
84         else
85                 decompress = xpress_decompress;
86
87         /* The structure of a compressed resource consists of a table of chunk
88          * offsets followed by the chunks themselves.  Each chunk consists of
89          * compressed data, and there is one chunk for each WIM_CHUNK_SIZE =
90          * 32768 bytes of the uncompressed file, with the last chunk having any
91          * remaining bytes.
92          *
93          * The chunk offsets are measured relative to the end of the chunk
94          * table.  The first chunk is omitted from the table in the WIM file
95          * because its offset is implicitly given by the fact that it directly
96          * follows the chunk table and therefore must have an offset of 0. 
97          */
98
99         /* Calculate how many chunks the resource conists of in its entirety. */
100         u64 num_chunks = (resource_uncompressed_size + WIM_CHUNK_SIZE - 1) /
101                                                                 WIM_CHUNK_SIZE;
102         /* As mentioned, the first chunk has no entry in the chunk table. */
103         u64 num_chunk_entries = num_chunks - 1;
104
105
106         /* The index of the chunk that the read starts at. */
107         u64 start_chunk = offset / WIM_CHUNK_SIZE;
108         /* The byte offset at which the read starts, within the start chunk. */
109         u64 start_chunk_offset = offset % WIM_CHUNK_SIZE;
110
111         /* The index of the chunk that contains the last byte of the read. */
112         u64 end_chunk   = (offset + len - 1) / WIM_CHUNK_SIZE;
113         /* The byte offset of the last byte of the read, within the end chunk */
114         u64 end_chunk_offset = (offset + len - 1) % WIM_CHUNK_SIZE;
115
116         /* Number of chunks that are actually needed to read the requested part
117          * of the file. */
118         u64 num_needed_chunks = end_chunk - start_chunk + 1;
119
120         /* If the end chunk is not the last chunk, an extra chunk entry is
121          * needed because we need to know the offset of the chunk after the last
122          * chunk read to figure out the size of the last read chunk. */
123         if (end_chunk != num_chunks - 1)
124                 num_needed_chunks++;
125
126         /* Declare the chunk table.  It will only contain offsets for the chunks
127          * that are actually needed for this read. */
128         u64 chunk_offsets[num_needed_chunks];
129
130         /* Set the implicit offset of the first chunk if it is included in the
131          * needed chunks.
132          *
133          * Note: M$'s documentation includes a picture that shows the first
134          * chunk starting right after the chunk entry table, labeled as offset
135          * 0x10.  However, in the actual file format, the offset is measured
136          * from the end of the chunk entry table, so the first chunk has an
137          * offset of 0. */
138         if (start_chunk == 0)
139                 chunk_offsets[0] = 0;
140
141         /* According to M$'s documentation, if the uncompressed size of
142          * the file is greater than 4 GB, the chunk entries are 8-byte
143          * integers.  Otherwise, they are 4-byte integers. */
144         u64 chunk_entry_size = (resource_uncompressed_size >= (u64)1 << 32) ? 
145                                                                         8 : 4;
146
147         /* Size of the full chunk table in the WIM file. */
148         u64 chunk_table_size = chunk_entry_size * num_chunk_entries;
149
150         /* Read the needed chunk offsets from the table in the WIM file. */
151
152         /* Index, in the WIM file, of the first needed entry in the
153          * chunk table. */
154         u64 start_table_idx = (start_chunk == 0) ? 0 : start_chunk - 1;
155
156         /* Number of entries we need to actually read from the chunk
157          * table (excludes the implicit first chunk). */
158         u64 num_needed_chunk_entries = (start_chunk == 0) ? 
159                                 num_needed_chunks - 1 : num_needed_chunks;
160
161         /* Skip over unneeded chunk table entries. */
162         u64 file_offset_of_needed_chunk_entries = resource_offset + 
163                                 start_table_idx * chunk_entry_size;
164         if (fseeko(fp, file_offset_of_needed_chunk_entries, SEEK_SET) != 0) {
165                 ERROR_WITH_ERRNO("Failed to seek to byte %"PRIu64" to read "
166                                  "chunk table of compressed resource",
167                                  file_offset_of_needed_chunk_entries);
168                 return WIMLIB_ERR_READ;
169         }
170
171         /* Number of bytes we need to read from the chunk table. */
172         size_t size = num_needed_chunk_entries * chunk_entry_size;
173
174         u8 chunk_tab_buf[size];
175
176         if (fread(chunk_tab_buf, 1, size, fp) != size)
177                 goto err;
178
179         /* Now fill in chunk_offsets from the entries we have read in
180          * chunk_tab_buf. */
181
182         u64 *chunk_tab_p = chunk_offsets;
183         if (start_chunk == 0)
184                 chunk_tab_p++;
185
186         if (chunk_entry_size == 4) {
187                 u32 *entries = (u32*)chunk_tab_buf;
188                 while (num_needed_chunk_entries--)
189                         *chunk_tab_p++ = to_le32(*entries++);
190         } else {
191                 u64 *entries = (u64*)chunk_tab_buf;
192                 while (num_needed_chunk_entries--)
193                         *chunk_tab_p++ = to_le64(*entries++);
194         }
195
196         /* Done with the chunk table now.  We must now seek to the first chunk
197          * that is needed for the read. */
198
199         u64 file_offset_of_first_needed_chunk = resource_offset + 
200                                 chunk_table_size + chunk_offsets[0];
201         if (fseeko(fp, file_offset_of_first_needed_chunk, SEEK_SET) != 0) {
202                 ERROR_WITH_ERRNO("Failed to seek to byte %"PRIu64" to read "
203                                  "first chunk of compressed resource",
204                                  file_offset_of_first_needed_chunk);
205                 return WIMLIB_ERR_READ;
206         }
207
208         /* Pointer to current position in the output buffer for uncompressed
209          * data. */
210         u8 *out_p = (u8*)contents_ret;
211
212         /* Buffer for compressed data.  While most compressed chunks will have a
213          * size much less than WIM_CHUNK_SIZE, WIM_CHUNK_SIZE - 1 is the maximum
214          * size in the worst-case.  This assumption is valid only if chunks that
215          * happen to compress to more than the uncompressed size (i.e. a
216          * sequence of random bytes) are always stored uncompressed. But this seems
217          * to be the case in M$'s WIM files, even though it is undocumented. */
218         u8 compressed_buf[WIM_CHUNK_SIZE - 1];
219
220
221         /* Decompress all the chunks. */
222         for (u64 i = start_chunk; i <= end_chunk; i++) {
223
224                 DEBUG2("Chunk %"PRIu64" (start %"PRIu64", end %"PRIu64").",
225                        i, start_chunk, end_chunk);
226
227                 /* Calculate the sizes of the compressed chunk and of the
228                  * uncompressed chunk. */
229                 uint compressed_chunk_size, uncompressed_chunk_size;
230                 if (i != num_chunks - 1) {
231                         /* All the chunks except the last one in the resource
232                          * expand to WIM_CHUNK_SIZE uncompressed, and the amount
233                          * of compressed data for the chunk is given by the
234                          * difference of offsets in the chunk offset table. */
235                         compressed_chunk_size = chunk_offsets[i + 1 - start_chunk] - 
236                                                 chunk_offsets[i - start_chunk];
237                         uncompressed_chunk_size = WIM_CHUNK_SIZE;
238                 } else {
239                         /* The last compressed chunk consists of the remaining
240                          * bytes in the file resource, and the last uncompressed
241                          * chunk has size equal to however many bytes are left-
242                          * that is, the remainder of the uncompressed size when
243                          * divided by WIM_CHUNK_SIZE. 
244                          *
245                          * Note that the resource_compressed_size includes the
246                          * chunk table, so the size of it must be subtracted. */
247                         compressed_chunk_size = resource_compressed_size - 
248                                                 chunk_table_size -
249                                                 chunk_offsets[i - start_chunk];
250
251                         uncompressed_chunk_size = resource_uncompressed_size % 
252                                                                 WIM_CHUNK_SIZE;
253
254                         /* If the remainder is 0, the last chunk actually
255                          * uncompresses to a full WIM_CHUNK_SIZE bytes. */
256                         if (uncompressed_chunk_size == 0)
257                                 uncompressed_chunk_size = WIM_CHUNK_SIZE;
258                 }
259
260                 DEBUG2("compressed_chunk_size = %u, "
261                        "uncompressed_chunk_size = %u",
262                        compressed_chunk_size, uncompressed_chunk_size);
263
264
265                 /* Figure out how much of this chunk we actually need to read */
266                 u64 start_offset;
267                 if (i == start_chunk)
268                         start_offset = start_chunk_offset;
269                 else
270                         start_offset = 0;
271                 u64 end_offset;
272                 if (i == end_chunk)
273                         end_offset = end_chunk_offset;
274                 else
275                         end_offset = WIM_CHUNK_SIZE - 1;
276
277                 u64 partial_chunk_size = end_offset + 1 - start_offset;
278                 bool is_partial_chunk = (partial_chunk_size != 
279                                                 uncompressed_chunk_size);
280
281                 DEBUG2("start_offset = %u, end_offset = %u", start_offset,
282                                         end_offset);
283                 DEBUG2("partial_chunk_size = %u", partial_chunk_size);
284
285                 /* This is undocumented, but chunks can be uncompressed.  This
286                  * appears to always be the case when the compressed chunk size
287                  * is equal to the uncompressed chunk size. */
288                 if (compressed_chunk_size == uncompressed_chunk_size) {
289                         /* Probably an uncompressed chunk */
290
291                         if (start_offset != 0) {
292                                 if (fseeko(fp, start_offset, SEEK_CUR) != 0) {
293                                         ERROR_WITH_ERRNO("Uncompressed partial "
294                                                          "chunk fseek() error");
295                                         return WIMLIB_ERR_READ;
296                                 }
297                         }
298                         if (fread(out_p, 1, partial_chunk_size, fp) != 
299                                         partial_chunk_size)
300                                 goto err;
301                 } else {
302                         /* Compressed chunk */
303                         int ret;
304
305                         /* Read the compressed data into compressed_buf. */
306                         if (fread(compressed_buf, 1, compressed_chunk_size, 
307                                                 fp) != compressed_chunk_size)
308                                 goto err;
309
310                         /* For partial chunks we must buffer the uncompressed
311                          * data because we don't need all of it. */
312                         if (is_partial_chunk) {
313                                 u8 uncompressed_buf[uncompressed_chunk_size];
314
315                                 ret = decompress(compressed_buf,
316                                                 compressed_chunk_size,
317                                                 uncompressed_buf, 
318                                                 uncompressed_chunk_size);
319                                 if (ret != 0)
320                                         return WIMLIB_ERR_DECOMPRESSION;
321                                 memcpy(out_p, uncompressed_buf + start_offset,
322                                                 partial_chunk_size);
323                         } else {
324                                 ret = decompress(compressed_buf,
325                                                 compressed_chunk_size,
326                                                 out_p,
327                                                 uncompressed_chunk_size);
328                                 if (ret != 0)
329                                         return WIMLIB_ERR_DECOMPRESSION;
330                         }
331                 }
332
333                 /* Advance the pointer into the uncompressed output data by the
334                  * number of uncompressed bytes that were written.  */
335                 out_p += partial_chunk_size;
336         }
337
338         return 0;
339
340 err:
341         if (feof(fp))
342                 ERROR("Unexpected EOF in compressed file resource");
343         else
344                 ERROR_WITH_ERRNO("Error reading compressed file resource");
345         return WIMLIB_ERR_READ;
346 }
347
348 /* 
349  * Reads uncompressed data from an open file stream.
350  */
351 int read_uncompressed_resource(FILE *fp, u64 offset, u64 len,
352                                u8 contents_ret[])
353 {
354         if (fseeko(fp, offset, SEEK_SET) != 0) {
355                 ERROR("Failed to seek to byte %"PRIu64" of input file "
356                       "to read uncompressed resource (len = %"PRIu64")",
357                       offset, len);
358                 return WIMLIB_ERR_READ;
359         }
360         if (fread(contents_ret, 1, len, fp) != len) {
361                 if (feof(fp)) {
362                         ERROR("Unexpected EOF in uncompressed file resource");
363                 } else {
364                         ERROR("Failed to read %"PRIu64" bytes from "
365                               "uncompressed resource at offset %"PRIu64,
366                               len, offset);
367                 }
368                 return WIMLIB_ERR_READ;
369         }
370         return 0;
371 }
372
373
374
375
376 /* Reads the contents of a struct resource_entry, as represented in the on-disk
377  * format, from the memory pointed to by @p, and fills in the fields of @entry.
378  * A pointer to the byte after the memory read at @p is returned. */
379 const u8 *get_resource_entry(const u8 *p, struct resource_entry *entry)
380 {
381         u64 size;
382         u8 flags;
383
384         p = get_u56(p, &size);
385         p = get_u8(p, &flags);
386         entry->size = size;
387         entry->flags = flags;
388         p = get_u64(p, &entry->offset);
389         p = get_u64(p, &entry->original_size);
390         return p;
391 }
392
393 /* Copies the struct resource_entry @entry to the memory pointed to by @p in the
394  * on-disk format.  A pointer to the byte after the memory written at @p is
395  * returned. */
396 u8 *put_resource_entry(u8 *p, const struct resource_entry *entry)
397 {
398         p = put_u56(p, entry->size);
399         p = put_u8(p, entry->flags);
400         p = put_u64(p, entry->offset);
401         p = put_u64(p, entry->original_size);
402         return p;
403 }
404
405 /*
406  * Reads some data from the resource corresponding to a WIM lookup table entry.
407  *
408  * @lte:        The WIM lookup table entry for the resource.
409  * @buf:        Buffer into which to write the data.
410  * @size:       Number of bytes to read.
411  * @offset:     Offset at which to start reading the resource.
412  * @raw:        If %true, compressed data is read literally rather than being
413  *                      decompressed first.
414  *
415  * Returns zero on success, nonzero on failure.
416  */
417 int read_wim_resource(const struct lookup_table_entry *lte, u8 buf[],
418                       size_t size, u64 offset, bool raw)
419 {
420         /* We shouldn't be allowing read over-runs in any part of the library.
421          * */
422         if (raw)
423                 wimlib_assert(offset + size <= lte->resource_entry.size);
424         else
425                 wimlib_assert(offset + size <= lte->resource_entry.original_size);
426
427         int ctype;
428         int ret;
429         FILE *fp;
430         switch (lte->resource_location) {
431         case RESOURCE_IN_WIM:
432                 /* The resource is in a WIM file, and its WIMStruct is given by
433                  * the lte->wim member.  The resource may be either compressed
434                  * or uncompressed. */
435                 wimlib_assert(lte->wim);
436                 wimlib_assert(lte->wim->fp);
437                 ctype = wim_resource_compression_type(lte);
438
439                 wimlib_assert(ctype != WIM_COMPRESSION_TYPE_NONE ||
440                               (lte->resource_entry.original_size ==
441                                lte->resource_entry.size));
442
443                 if (raw || ctype == WIM_COMPRESSION_TYPE_NONE)
444                         return read_uncompressed_resource(lte->wim->fp,
445                                                           lte->resource_entry.offset + offset,
446                                                           size, buf);
447                 else
448                         return read_compressed_resource(lte->wim->fp,
449                                                         lte->resource_entry.size,
450                                                         lte->resource_entry.original_size,
451                                                         lte->resource_entry.offset,
452                                                         ctype, size, offset, buf);
453                 break;
454         case RESOURCE_IN_STAGING_FILE:
455         case RESOURCE_IN_FILE_ON_DISK:
456                 /* The resource is in some file on the external filesystem and
457                  * needs to be read uncompressed */
458                 wimlib_assert(lte->file_on_disk);
459                 wimlib_assert(&lte->file_on_disk == &lte->staging_file_name);
460                 /* Use existing file pointer if available; otherwise open one
461                  * temporarily */
462                 if (lte->file_on_disk_fp) {
463                         fp = lte->file_on_disk_fp;
464                 } else {
465                         fp = fopen(lte->file_on_disk, "rb");
466                         if (!fp) {
467                                 ERROR_WITH_ERRNO("Failed to open the file "
468                                                  "`%s'", lte->file_on_disk);
469                         }
470                 }
471                 ret = read_uncompressed_resource(fp, offset, size, buf);
472                 if (fp != lte->file_on_disk_fp)
473                         fclose(fp);
474                 return ret;
475                 break;
476         case RESOURCE_IN_ATTACHED_BUFFER:
477                 /* The resource is directly attached uncompressed in an
478                  * in-memory buffer. */
479                 wimlib_assert(lte->attached_buffer);
480                 memcpy(buf, lte->attached_buffer + offset, size);
481                 return 0;
482                 break;
483 #ifdef WITH_NTFS_3G
484         case RESOURCE_IN_NTFS_VOLUME:
485                 if (lte->attr) {
486                         if (ntfs_attr_pread(lte->attr, offset, size, buf) == size) {
487                                 return 0;
488                         } else {
489                                 ERROR_WITH_ERRNO("Error reading NTFS attribute "
490                                                  "at `%s'",
491                                                  lte->ntfs_loc->path_utf8);
492                                 return WIMLIB_ERR_NTFS_3G;
493                         }
494                 } else {
495                         wimlib_assert(0);
496                 }
497                 break;
498 #endif
499         default:
500                 assert(0);
501         }
502 }
503
504 /* 
505  * Reads all the data from the resource corresponding to a WIM lookup table
506  * entry.
507  *
508  * @lte:        The WIM lookup table entry for the resource.
509  * @buf:        Buffer into which to write the data.  It must be at least
510  *              wim_resource_size(lte) bytes long.
511  *
512  * Returns 0 on success; nonzero on failure.
513  */
514 int read_full_wim_resource(const struct lookup_table_entry *lte, u8 buf[])
515 {
516         return read_wim_resource(lte, buf, wim_resource_size(lte), 0, false);
517 }
518
519 /* Chunk table that's located at the beginning of each compressed resource in
520  * the WIM.  (This is not the on-disk format; the on-disk format just has an
521  * array of offsets.) */
522 struct chunk_table {
523         off_t file_offset;
524         u64 num_chunks;
525         u64 original_resource_size;
526         u64 bytes_per_chunk_entry;
527         u64 table_disk_size;
528         u64 cur_offset;
529         u64 *cur_offset_p;
530         u64 offsets[0];
531 };
532
533 /* 
534  * Allocates and initializes a chunk table, and reserves space for it in the
535  * output file.
536  */
537 static int
538 begin_wim_resource_chunk_tab(const struct lookup_table_entry *lte,
539                              FILE *out_fp,
540                              off_t file_offset,
541                              struct chunk_table **chunk_tab_ret)
542 {
543         u64 size = wim_resource_size(lte);
544         u64 num_chunks = (size + WIM_CHUNK_SIZE - 1) / WIM_CHUNK_SIZE;
545         struct chunk_table *chunk_tab = MALLOC(sizeof(struct chunk_table) +
546                                                num_chunks * sizeof(u64));
547         int ret = 0;
548
549         wimlib_assert(size != 0);
550
551         if (!chunk_tab) {
552                 ERROR("Failed to allocate chunk table for %"PRIu64" byte "
553                       "resource", size);
554                 ret = WIMLIB_ERR_NOMEM;
555                 goto out;
556         }
557         chunk_tab->file_offset = file_offset;
558         chunk_tab->num_chunks = num_chunks;
559         chunk_tab->original_resource_size = size;
560         chunk_tab->bytes_per_chunk_entry = (size >= (1ULL << 32)) ? 8 : 4;
561         chunk_tab->table_disk_size = chunk_tab->bytes_per_chunk_entry *
562                                      (num_chunks - 1);
563         chunk_tab->cur_offset = 0;
564         chunk_tab->cur_offset_p = chunk_tab->offsets;
565
566         if (fwrite(chunk_tab, 1, chunk_tab->table_disk_size, out_fp) !=
567                    chunk_tab->table_disk_size) {
568                 ERROR_WITH_ERRNO("Failed to write chunk table in compressed "
569                                  "file resource");
570                 ret = WIMLIB_ERR_WRITE;
571                 goto out;
572         }
573
574         *chunk_tab_ret = chunk_tab;
575 out:
576         return ret;
577 }
578
579 /* 
580  * Compresses a chunk of a WIM resource.
581  *
582  * @chunk:              Uncompressed data of the chunk.
583  * @chunk_size:         Size of the uncompressed chunk in bytes.
584  * @compressed_chunk:   Pointer to output buffer of size at least
585  *                              (@chunk_size - 1) bytes.
586  * @compressed_chunk_len_ret:   Pointer to an unsigned int into which the size
587  *                                      of the compressed chunk will be
588  *                                      returned.
589  * @ctype:      Type of compression to use.  Must be WIM_COMPRESSION_TYPE_LZX
590  *              or WIM_COMPRESSION_TYPE_XPRESS.
591  *
592  * Returns zero if compressed succeeded, and nonzero if the chunk could not be
593  * compressed to any smaller than @chunk_size.  This function cannot fail for
594  * any other reasons.
595  */
596 static int compress_chunk(const u8 chunk[], unsigned chunk_size,
597                           u8 compressed_chunk[],
598                           unsigned *compressed_chunk_len_ret,
599                           int ctype)
600 {
601         unsigned compressed_chunk_sz;
602         int (*compress)(const void *, unsigned, void *, unsigned *);
603         switch (ctype) {
604         case WIM_COMPRESSION_TYPE_LZX:
605                 compress = lzx_compress;
606                 break;
607         case WIM_COMPRESSION_TYPE_XPRESS:
608                 compress = xpress_compress;
609                 break;
610         default:
611                 wimlib_assert(0);
612                 break;
613         }
614         return (*compress)(chunk, chunk_size, compressed_chunk,
615                            compressed_chunk_len_ret);
616 }
617
618 /*
619  * Writes a chunk of a WIM resource to an output file.
620  *
621  * @chunk:        Uncompressed data of the chunk.
622  * @chunk_size:   Size of the chunk (<= WIM_CHUNK_SIZE)
623  * @out_fp:       FILE * to write tho chunk to.
624  * @out_ctype:    Compression type to use when writing the chunk (ignored if no 
625  *                      chunk table provided)
626  * @chunk_tab:    Pointer to chunk table being created.  It is updated with the
627  *                      offset of the chunk we write.
628  *
629  * Returns 0 on success; nonzero on failure.
630  */
631 static int write_wim_resource_chunk(const u8 chunk[], unsigned chunk_size,
632                                     FILE *out_fp, int out_ctype,
633                                     struct chunk_table *chunk_tab)
634 {
635         const u8 *out_chunk;
636         unsigned out_chunk_size;
637
638         wimlib_assert(chunk_size <= WIM_CHUNK_SIZE);
639
640         if (!chunk_tab) {
641                 out_chunk = chunk;
642                 out_chunk_size = chunk_size;
643         } else {
644                 u8 *compressed_chunk = alloca(chunk_size);
645                 int ret;
646                 unsigned compressed_chunk_len;
647
648                 ret = compress_chunk(chunk, chunk_size, compressed_chunk,
649                                      &out_chunk_size, out_ctype);
650                 if (ret == 0) {
651                         out_chunk = compressed_chunk;
652                 } else {
653                         out_chunk = chunk;
654                         out_chunk_size = chunk_size;
655                 }
656                 *chunk_tab->cur_offset_p++ = chunk_tab->cur_offset;
657                 chunk_tab->cur_offset += out_chunk_size;
658         }
659         
660         if (fwrite(out_chunk, 1, out_chunk_size, out_fp) != out_chunk_size) {
661                 ERROR_WITH_ERRNO("Failed to write WIM resource chunk");
662                 return WIMLIB_ERR_WRITE;
663         }
664         return 0;
665 }
666
667 /* 
668  * Finishes a WIM chunk tale and writes it to the output file at the correct
669  * offset.
670  *
671  * The final size of the full compressed resource is returned in the
672  * @compressed_size_p.
673  */
674 static int
675 finish_wim_resource_chunk_tab(struct chunk_table *chunk_tab,
676                               FILE *out_fp, u64 *compressed_size_p)
677 {
678         size_t bytes_written;
679         if (fseeko(out_fp, chunk_tab->file_offset, SEEK_SET) != 0) {
680                 ERROR_WITH_ERRNO("Failed to seek to byte "PRIu64" of output "
681                                  "WIM file", chunk_tab->file_offset);
682                 return WIMLIB_ERR_WRITE;
683         }
684
685         if (chunk_tab->bytes_per_chunk_entry == 8) {
686                 array_to_le64(chunk_tab->offsets, chunk_tab->num_chunks);
687         } else {
688                 for (u64 i = 0; i < chunk_tab->num_chunks; i++)
689                         ((u32*)chunk_tab->offsets)[i] =
690                                 to_le32(chunk_tab->offsets[i]);
691         }
692         bytes_written = fwrite((u8*)chunk_tab->offsets +
693                                         chunk_tab->bytes_per_chunk_entry,
694                                1, chunk_tab->table_disk_size, out_fp);
695         if (bytes_written != chunk_tab->table_disk_size) {
696                 ERROR_WITH_ERRNO("Failed to write chunk table in compressed "
697                                  "file resource");
698                 return WIMLIB_ERR_WRITE;
699         }
700         if (fseeko(out_fp, 0, SEEK_END) != 0) {
701                 ERROR_WITH_ERRNO("Failed to seek to end of output WIM file");
702                 return WIMLIB_ERR_WRITE;
703         }
704         *compressed_size_p = chunk_tab->cur_offset + chunk_tab->table_disk_size;
705         return 0;
706 }
707
708 /*
709  * Writes a WIM resource to a FILE * opened for writing.  The resource may be
710  * written uncompressed or compressed depending on the @out_ctype parameter.
711  *
712  * If by chance the resource compresses to more than the original size (this may
713  * happen with random data or files than are pre-compressed), the resource is
714  * instead written uncompressed (and this is reflected in the @out_res_entry by
715  * removing the WIM_RESHDR_FLAG_COMPRESSED flag).
716  *
717  * @lte:        The lookup table entry for the WIM resource.
718  * @out_fp:     The FILE * to write the resource to.
719  * @out_ctype:  The compression type of the resource to write.  Note: if this is
720  *                      the same as the compression type of the WIM resource we
721  *                      need to read, we simply copy the data (i.e. we do not
722  *                      uncompress it, then compress it again).
723  * @out_res_entry:  If non-NULL, a resource entry that is filled in with the 
724  *                  offset, original size, compressed size, and compression flag
725  *                  of the output resource.
726  *
727  * Returns 0 on success; nonzero on failure.
728  */
729 static int write_wim_resource(struct lookup_table_entry *lte,
730                               FILE *out_fp, int out_ctype,
731                               struct resource_entry *out_res_entry)
732 {
733         u64 bytes_remaining;
734         u64 original_size;
735         u64 old_compressed_size;
736         u64 new_compressed_size;
737         u64 offset = 0;
738         int ret = 0;
739         struct chunk_table *chunk_tab = NULL;
740         bool raw;
741         off_t file_offset;
742 #ifdef WITH_NTFS_3G
743         ntfs_inode *ni;
744 #endif
745
746         /* Original size of the resource */
747         original_size = wim_resource_size(lte);
748
749         /* Compressed size of the resource (as it exists now) */
750         old_compressed_size = wim_resource_compressed_size(lte);
751
752         /* Current offset in output file */
753         file_offset = ftello(out_fp);
754         if (file_offset == -1) {
755                 ERROR_WITH_ERRNO("Failed to get offset in output "
756                                  "stream");
757                 return WIMLIB_ERR_WRITE;
758         }
759         
760         /* Are the compression types the same?  If so, do a raw copy (copy
761          * without decompressing and recompressing the data). */
762         raw = (wim_resource_compression_type(lte) == out_ctype
763                && out_ctype != WIM_COMPRESSION_TYPE_NONE);
764         if (raw)
765                 bytes_remaining = old_compressed_size;
766         else
767                 bytes_remaining = original_size;
768
769         /* Empty resource; nothing needs to be done, so just return success. */
770         if (bytes_remaining == 0)
771                 return 0;
772
773         /* Buffer for reading chunks for the resource */
774         char buf[min(WIM_CHUNK_SIZE, bytes_remaining)];
775
776         /* If we are writing a compressed resource and not doing a raw copy, we
777          * need to initialize the chunk table */
778         if (out_ctype != WIM_COMPRESSION_TYPE_NONE && !raw) {
779                 ret = begin_wim_resource_chunk_tab(lte, out_fp, file_offset,
780                                                    &chunk_tab);
781                 if (ret != 0)
782                         goto out;
783         }
784
785         /* If the WIM resource is in an external file, open a FILE * to it so we
786          * don't have to open a temporary one in read_wim_resource() for each
787          * chunk. */
788         if (lte->resource_location == RESOURCE_IN_FILE_ON_DISK
789              && !lte->file_on_disk_fp)
790         {
791                 wimlib_assert(lte->file_on_disk);
792                 lte->file_on_disk_fp = fopen(lte->file_on_disk, "rb");
793                 if (!lte->file_on_disk_fp) {
794                         ERROR_WITH_ERRNO("Failed to open the file `%s' for "
795                                          "reading", lte->file_on_disk);
796                         ret = WIMLIB_ERR_OPEN;
797                         goto out;
798                 }
799         }
800 #ifdef WITH_NTFS_3G
801         else if (lte->resource_location == RESOURCE_IN_NTFS_VOLUME
802                    && !lte->attr)
803         {
804                 struct ntfs_location *loc = lte->ntfs_loc;
805                 wimlib_assert(loc);
806                 ni = ntfs_pathname_to_inode(*loc->ntfs_vol_p, NULL, loc->path_utf8);
807                 if (!ni) {
808                         ERROR_WITH_ERRNO("Failed to open inode `%s' in NTFS "
809                                          "volume", loc->path_utf8);
810                 }
811                 lte->attr = ntfs_attr_open(ni,
812                                            loc->is_reparse_point ? AT_REPARSE_POINT : AT_DATA,
813                                            (ntfschar*)loc->stream_name_utf16,
814                                            loc->stream_name_utf16_num_chars);
815                 if (!lte->attr) {
816                         ntfs_inode_close(ni);
817                         ERROR_WITH_ERRNO("Failed to open attribute of `%s' in "
818                                          "NTFS volume", loc->path_utf8);
819                 }
820         }
821 #endif
822
823         /* If we aren't doing a raw copy, we will compute the SHA1 message
824          * digest of the resource as we read it, and verify it's the same as the
825          * hash given in the lookup table entry once we've finished reading the
826          * resource. */
827         SHA_CTX ctx;
828         if (!raw)
829                 sha1_init(&ctx);
830
831         /* While there are still bytes remaining in the WIM resource, read a
832          * chunk of the resource, update SHA1, then write that chunk using the
833          * desired compression type. */
834         do {
835                 u64 to_read = min(bytes_remaining, WIM_CHUNK_SIZE);
836                 ret = read_wim_resource(lte, buf, to_read, offset, raw);
837                 if (ret != 0)
838                         goto out_fclose;
839                 if (!raw)
840                         sha1_update(&ctx, buf, to_read);
841                 ret = write_wim_resource_chunk(buf, to_read, out_fp,
842                                                out_ctype, chunk_tab);
843                 if (ret != 0)
844                         goto out_fclose;
845                 bytes_remaining -= to_read;
846                 offset += to_read;
847         } while (bytes_remaining);
848
849         /* If writing a compressed resource and not doing a raw copy, write the
850          * chunk table, and finish_wim_resource_chunk_tab() will provide the
851          * compressed size of the resource we wrote.  Otherwise, the compressed
852          * size of the written resource is the same as the compressed size of
853          * the existing resource. */
854         if (out_ctype != WIM_COMPRESSION_TYPE_NONE && !raw) {
855                 ret = finish_wim_resource_chunk_tab(chunk_tab, out_fp,
856                                                     &new_compressed_size);
857                 if (ret != 0)
858                         goto out_fclose;
859         } else {
860                 new_compressed_size = old_compressed_size;
861         }
862
863         /* Verify SHA1 message digest of the resource, unless we are doing a raw
864          * write (in which case we never even saw the uncompressed data).  Or,
865          * if the hash we had before is all 0's, just re-set it to be the new
866          * hash. */
867         if (!raw) {
868                 u8 md[SHA1_HASH_SIZE];
869                 sha1_final(md, &ctx);
870                 if (is_zero_hash(lte->hash)) {
871                         copy_hash(lte->hash, md);
872                 } else if (!hashes_equal(md, lte->hash)) {
873                         ERROR("WIM resource has incorrect hash!");
874                         if (lte->resource_location == RESOURCE_IN_FILE_ON_DISK) {
875                                 ERROR("We were reading it from `%s'; maybe it changed "
876                                       "while we were reading it.",
877                                       lte->file_on_disk);
878                         }
879                         ret = WIMLIB_ERR_INVALID_RESOURCE_HASH;
880                         goto out_fclose;
881                 }
882         }
883
884         if (new_compressed_size > original_size) {
885                 /* Oops!  We compressed the resource to larger than the original
886                  * size.  Write the resource uncompressed instead. */
887                 if (fseeko(out_fp, file_offset, SEEK_SET) != 0) {
888                         ERROR_WITH_ERRNO("Failed to seek to byte "PRIu64" "
889                                          "of output WIM file", file_offset);
890                         ret = WIMLIB_ERR_WRITE;
891                         goto out_fclose;
892                 }
893                 ret = write_wim_resource(lte, out_fp, WIM_COMPRESSION_TYPE_NONE,
894                                          out_res_entry);
895                 if (ret != 0)
896                         goto out_fclose;
897                 if (fflush(out_fp) != 0) {
898                         ERROR_WITH_ERRNO("Failed to flush output WIM file");
899                         ret = WIMLIB_ERR_WRITE;
900                         goto out_fclose;
901                 }
902                 if (ftruncate(fileno(out_fp), file_offset + out_res_entry->size) != 0) {
903                         ERROR_WITH_ERRNO("Failed to truncate output WIM file");
904                         ret = WIMLIB_ERR_WRITE;
905                 }
906                 goto out_fclose;
907         }
908         wimlib_assert(new_compressed_size <= original_size);
909         if (out_res_entry) {
910                 out_res_entry->size          = new_compressed_size;
911                 out_res_entry->original_size = original_size;
912                 out_res_entry->offset        = file_offset;
913                 out_res_entry->flags         = lte->resource_entry.flags
914                                                 & ~WIM_RESHDR_FLAG_COMPRESSED;
915                 if (out_ctype != WIM_COMPRESSION_TYPE_NONE)
916                         out_res_entry->flags |= WIM_RESHDR_FLAG_COMPRESSED;
917         }
918 out_fclose:
919         if (lte->resource_location == RESOURCE_IN_FILE_ON_DISK
920              && lte->file_on_disk_fp) {
921                 fclose(lte->file_on_disk_fp);
922                 lte->file_on_disk_fp = NULL;
923         }
924 #ifdef WITH_NTFS_3G
925         else if (lte->resource_location == RESOURCE_IN_NTFS_VOLUME
926                  && lte->attr) {
927                 ntfs_attr_close(lte->attr);
928                 ntfs_inode_close(ni);
929         }
930 #endif
931 out:
932         FREE(chunk_tab);
933         return ret;
934 }
935
936 /* Like write_wim_resource(), but the resource is specified by a buffer of
937  * uncompressed data rather a lookup table entry; also writes the SHA1 hash of
938  * the buffer to @hash.  */
939 static int write_wim_resource_from_buffer(const u8 *buf, u64 buf_size,
940                                           FILE *out_fp, int out_ctype,
941                                           struct resource_entry *out_res_entry,
942                                           u8 hash[SHA1_HASH_SIZE])
943 {
944         /* Set up a temporary lookup table entry that we provide to
945          * write_wim_resource(). */
946         struct lookup_table_entry lte;
947         int ret;
948         lte.resource_entry.flags         = 0;
949         lte.resource_entry.original_size = buf_size;
950         lte.resource_entry.size          = buf_size;
951         lte.resource_entry.offset        = 0;
952         lte.resource_location            = RESOURCE_IN_ATTACHED_BUFFER;
953         lte.attached_buffer              = (u8*)buf;
954
955         zero_hash(lte.hash);
956         ret = write_wim_resource(&lte, out_fp, out_ctype, out_res_entry);
957         if (ret != 0)
958                 return ret;
959         copy_hash(hash, lte.hash);
960         return 0;
961 }
962
963 /* 
964  * Extracts the first @size bytes of the WIM resource specified by @lte to the
965  * open file descriptor @fd.
966  * 
967  * Returns 0 on success; nonzero on failure.
968  */
969 int extract_wim_resource_to_fd(const struct lookup_table_entry *lte, int fd,
970                                u64 size)
971 {
972         u64 bytes_remaining = size;
973         char buf[min(WIM_CHUNK_SIZE, bytes_remaining)];
974         u64 offset = 0;
975         int ret = 0;
976         u8 hash[SHA1_HASH_SIZE];
977
978         SHA_CTX ctx;
979         sha1_init(&ctx);
980
981         while (bytes_remaining) {
982                 u64 to_read = min(bytes_remaining, WIM_CHUNK_SIZE);
983                 ret = read_wim_resource(lte, buf, to_read, offset, false);
984                 if (ret != 0)
985                         break;
986                 sha1_update(&ctx, buf, to_read);
987                 if (full_write(fd, buf, to_read) < 0) {
988                         ERROR_WITH_ERRNO("Error extracting WIM resource");
989                         return WIMLIB_ERR_WRITE;
990                 }
991                 bytes_remaining -= to_read;
992                 offset += to_read;
993         }
994         sha1_final(hash, &ctx);
995         if (!hashes_equal(hash, lte->hash)) {
996                 ERROR("Invalid checksum on a WIM resource "
997                       "(detected when extracting to external file)");
998                 ERROR("The following WIM resource is invalid:");
999                 print_lookup_table_entry(lte);
1000                 return WIMLIB_ERR_INVALID_RESOURCE_HASH;
1001         }
1002         return 0;
1003 }
1004
1005 /* 
1006  * Extracts the WIM resource specified by @lte to the open file descriptor @fd.
1007  * 
1008  * Returns 0 on success; nonzero on failure.
1009  */
1010 int extract_full_wim_resource_to_fd(const struct lookup_table_entry *lte, int fd)
1011 {
1012         return extract_wim_resource_to_fd(lte, fd, wim_resource_size(lte));
1013 }
1014
1015 /* 
1016  * Copies the file resource specified by the lookup table entry @lte from the
1017  * input WIM to the output WIM that has its FILE * given by
1018  * ((WIMStruct*)wim)->out_fp.
1019  *
1020  * The output_resource_entry, out_refcnt, and part_number fields of @lte are
1021  * updated.
1022  *
1023  * Metadata resources are not copied (they are handled elsewhere for joining and
1024  * splitting).
1025  */
1026 int copy_resource(struct lookup_table_entry *lte, void *wim)
1027 {
1028         WIMStruct *w = wim;
1029         int ret;
1030
1031         if ((lte->resource_entry.flags & WIM_RESHDR_FLAG_METADATA) &&
1032             !w->write_metadata)
1033                 return 0;
1034
1035         ret = write_wim_resource(lte, w->out_fp,
1036                                  wim_resource_compression_type(lte), 
1037                                  &lte->output_resource_entry);
1038         if (ret != 0)
1039                 return ret;
1040         lte->out_refcnt = lte->refcnt;
1041         lte->part_number = w->hdr.part_number;
1042         return 0;
1043 }
1044
1045 /* 
1046  * Writes a dentry's resources, including the main file resource as well as all
1047  * alternate data streams, to the output file. 
1048  *
1049  * @dentry:  The dentry for the file.
1050  * @wim_p:   A pointer to the WIMStruct containing @dentry.
1051  *
1052  * @return zero on success, nonzero on failure. 
1053  */
1054 int write_dentry_resources(struct dentry *dentry, void *wim_p)
1055 {
1056         WIMStruct *w = wim_p;
1057         int ret = 0;
1058         struct lookup_table_entry *lte;
1059         int ctype = wimlib_get_compression_type(w);
1060
1061         if (w->write_flags & WIMLIB_WRITE_FLAG_VERBOSE) {
1062                 wimlib_assert(dentry->full_path_utf8);
1063                 printf("Writing streams for `%s'\n", dentry->full_path_utf8);
1064         }
1065
1066         for (unsigned i = 0; i <= dentry->num_ads; i++) {
1067                 lte = dentry_stream_lte(dentry, i, w->lookup_table);
1068                 if (lte && ++lte->out_refcnt == 1) {
1069                         ret = write_wim_resource(lte, w->out_fp, ctype,
1070                                                  &lte->output_resource_entry);
1071                         if (ret != 0)
1072                                 break;
1073                 }
1074         }
1075         return ret;
1076 }
1077
1078 /* 
1079  * Reads the metadata metadata resource from the WIM file.  The metadata
1080  * resource consists of the security data, followed by the directory entry for
1081  * the root directory, followed by all the other directory entries in the
1082  * filesystem.  The subdir_offset field of each directory entry gives the start
1083  * of its child entries from the beginning of the metadata resource.  An
1084  * end-of-directory is signaled by a directory entry of length '0', really of
1085  * length 8, because that's how long the 'length' field is.
1086  *
1087  * @fp:         The FILE* for the input WIM file.
1088  * @wim_ctype:  The compression type of the WIM file.
1089  * @imd:        Pointer to the image metadata structure.  Its `metadata_lte'
1090  *              member specifies the lookup table entry for the metadata
1091  *              resource.  The rest of the image metadata entry will be filled
1092  *              in by this function.
1093  *
1094  * @return:     Zero on success, nonzero on failure.
1095  */
1096 int read_metadata_resource(FILE *fp, int wim_ctype, struct image_metadata *imd)
1097 {
1098         u8 *buf;
1099         int ctype;
1100         u32 dentry_offset;
1101         int ret;
1102         struct dentry *dentry;
1103         struct wim_security_data *sd;
1104         struct link_group_table *lgt;
1105         const struct lookup_table_entry *metadata_lte;
1106         const struct resource_entry *res_entry;
1107
1108         metadata_lte = imd->metadata_lte;
1109         res_entry = &metadata_lte->resource_entry;
1110
1111         DEBUG("Reading metadata resource: length = %"PRIu64", "
1112               "offset = %"PRIu64"",
1113               res_entry->original_size, res_entry->offset);
1114
1115         if (res_entry->original_size < 8) {
1116                 ERROR("Expected at least 8 bytes for the metadata resource");
1117                 return WIMLIB_ERR_INVALID_RESOURCE_SIZE;
1118         }
1119
1120         /* Allocate memory for the uncompressed metadata resource. */
1121         buf = MALLOC(res_entry->original_size);
1122
1123         if (!buf) {
1124                 ERROR("Failed to allocate %"PRIu64" bytes for uncompressed "
1125                       "metadata resource", res_entry->original_size);
1126                 return WIMLIB_ERR_NOMEM;
1127         }
1128
1129         /* Determine the compression type of the metadata resource. */
1130
1131         /* Read the metadata resource into memory.  (It may be compressed.) */
1132         ret = read_full_wim_resource(metadata_lte, buf);
1133         if (ret != 0)
1134                 goto out_free_buf;
1135
1136         DEBUG("Finished reading metadata resource into memory.");
1137
1138         /* The root directory entry starts after security data, on an 8-byte
1139          * aligned address. 
1140          *
1141          * The security data starts with a 4-byte integer giving its total
1142          * length. */
1143
1144         /* Read the security data into a wim_security_data structure. */
1145         ret = read_security_data(buf, res_entry->original_size, &sd);
1146         if (ret != 0)
1147                 goto out_free_buf;
1148
1149         dentry = MALLOC(sizeof(struct dentry));
1150         if (!dentry) {
1151                 ERROR("Failed to allocate %zu bytes for root dentry",
1152                       sizeof(struct dentry));
1153                 ret = WIMLIB_ERR_NOMEM;
1154                 goto out_free_security_data;
1155         }
1156
1157         get_u32(buf, &dentry_offset);
1158         if (dentry_offset == 0)
1159                 dentry_offset = 8;
1160         dentry_offset = (dentry_offset + 7) & ~7;
1161                 
1162         ret = read_dentry(buf, res_entry->original_size, dentry_offset, dentry);
1163         /* This is the root dentry, so set its pointers correctly. */
1164         dentry->parent = dentry;
1165         dentry->next   = dentry;
1166         dentry->prev   = dentry;
1167         if (ret != 0)
1168                 goto out_free_dentry_tree;
1169
1170         DEBUG("Reading dentry tree");
1171         /* Now read the entire directory entry tree. */
1172         ret = read_dentry_tree(buf, res_entry->original_size, dentry);
1173         if (ret != 0)
1174                 goto out_free_dentry_tree;
1175
1176         DEBUG("Calculating dentry full paths");
1177         /* Calculate the full paths in the dentry tree. */
1178         ret = for_dentry_in_tree(dentry, calculate_dentry_full_path, NULL);
1179         if (ret != 0)
1180                 goto out_free_dentry_tree;
1181
1182         DEBUG("Building link group table");
1183         /* Build hash table that maps hard link group IDs to dentry sets */
1184         lgt = new_link_group_table(9001);
1185         if (!lgt)
1186                 goto out_free_dentry_tree;
1187         ret = for_dentry_in_tree(dentry, link_group_table_insert, lgt);
1188         if (ret != 0)
1189                 goto out_free_lgt;
1190
1191         DEBUG("Freeing duplicate ADS entries in link group table");
1192         ret = link_groups_free_duplicate_data(lgt);
1193         if (ret != 0)
1194                 goto out_free_lgt;
1195         DEBUG("Done reading image metadata");
1196
1197         imd->lgt           = lgt;
1198         imd->security_data = sd;
1199         imd->root_dentry   = dentry;
1200         goto out_free_buf;
1201 out_free_lgt:
1202         free_link_group_table(lgt);
1203 out_free_dentry_tree:
1204         free_dentry_tree(dentry, NULL);
1205 out_free_security_data:
1206         free_security_data(sd);
1207 out_free_buf:
1208         FREE(buf);
1209         return ret;
1210 }
1211
1212 /* Write the metadata resource for the current WIM image. */
1213 int write_metadata_resource(WIMStruct *w)
1214 {
1215         u8 *buf;
1216         u8 *p;
1217         int ret;
1218         u64 subdir_offset;
1219         struct dentry *root;
1220         struct lookup_table_entry *lte, *duplicate_lte;
1221         u64 metadata_original_size;
1222
1223         /* 
1224          * We append 20 random bytes to the metadata resource so that we don't
1225          * have identical metadata resources if we happen to append exactly the
1226          * same image twice without any changes in timestamps.  If this were to
1227          * happen, it would cause confusion about the number and order of images
1228          * in the WIM.
1229          */
1230         const unsigned random_tail_len = 20;
1231
1232         DEBUG("Writing metadata resource for image %d", w->current_image);
1233
1234         root = wim_root_dentry(w);
1235
1236         const struct wim_security_data *sd = wim_security_data(w);
1237         wimlib_assert(sd);
1238         subdir_offset = sd->total_length + root->length + 8;
1239         calculate_subdir_offsets(root, &subdir_offset);
1240         metadata_original_size = subdir_offset + random_tail_len;
1241         buf = MALLOC(metadata_original_size);
1242         if (!buf) {
1243                 ERROR("Failed to allocate %"PRIu64" bytes for "
1244                       "metadata resource", metadata_original_size);
1245                 return WIMLIB_ERR_NOMEM;
1246         }
1247
1248         p = write_security_data(sd, buf);
1249
1250         DEBUG("Writing dentry tree.");
1251         p = write_dentry_tree(root, p);
1252         randomize_byte_array(p, random_tail_len);
1253         wimlib_assert(p - buf + random_tail_len == metadata_original_size);
1254
1255         lte = wim_metadata_lookup_table_entry(w);
1256
1257         ret = write_wim_resource_from_buffer(buf, metadata_original_size,
1258                                              w->out_fp,
1259                                              wimlib_get_compression_type(w),
1260                                              &lte->output_resource_entry,
1261                                              lte->hash);
1262         lookup_table_unlink(w->lookup_table, lte);
1263         lookup_table_insert(w->lookup_table, lte);
1264         wimlib_assert(lte->out_refcnt == 0);
1265         lte->out_refcnt = 1;
1266         lte->output_resource_entry.flags |= WIM_RESHDR_FLAG_METADATA;
1267 out:
1268         FREE(buf);
1269         return ret;
1270 }