archlinux/PKGBUILD: don't install README.WINDOWS

[wimlib] / src / lzms_decompress.c

/*
 * lzms_decompress.c
 *
 * A decompressor for the LZMS compression format.
 */

/*
 * Copyright (C) 2013, 2014, 2015 Eric Biggers
 *
 * This file is free software; you can redistribute it and/or modify it under
 * the terms of the GNU Lesser General Public License as published by the Free
 * Software Foundation; either version 3 of the License, or (at your option) any
 * later version.
 *
 * This file is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 * FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
 * details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this file; if not, see http://www.gnu.org/licenses/.
 */

/*
 * This is a decompressor for the LZMS compression format used by Microsoft.
 * This format is not documented, but it is one of the formats supported by the
 * compression API available in Windows 8, and as of Windows 8 it is one of the
 * formats that can be used in WIM files.
 *
 * This decompressor only implements "raw" decompression, which decompresses a
 * single LZMS-compressed block.  This behavior is the same as that of
 * Decompress() in the Windows 8 compression API when using a compression handle
 * created with CreateDecompressor() with the Algorithm parameter specified as
 * COMPRESS_ALGORITHM_LZMS | COMPRESS_RAW.  Presumably, non-raw LZMS data is a
 * container format from which the locations and sizes (both compressed and
 * uncompressed) of the constituent blocks can be determined.
 *
 * An LZMS-compressed block must be read in 16-bit little endian units from both
 * directions.  One logical bitstream starts at the front of the block and
 * proceeds forwards.  Another logical bitstream starts at the end of the block
 * and proceeds backwards.  Bits read from the forwards bitstream constitute
 * binary range-encoded data, whereas bits read from the backwards bitstream
 * constitute Huffman-encoded symbols or verbatim bits.  For both bitstreams,
 * the ordering of the bits within the 16-bit coding units is such that the
 * first bit is the high-order bit and the last bit is the low-order bit.
 *
 * From these two logical bitstreams, an LZMS decompressor can reconstitute the
 * series of items that make up the LZMS data representation.  Each such item
 * may be a literal byte or a match.  Matches may be either traditional LZ77
 * matches or "delta" matches, either of which can have its offset encoded
 * explicitly or encoded via a reference to a recently used (repeat) offset.
 *
 * A traditional LZ77 match consists of a length and offset.  It asserts that
 * the sequence of bytes beginning at the current position and extending for the
 * length is equal to the same-length sequence of bytes at the offset back in
 * the data buffer.  This type of match can be visualized as follows, with the
 * caveat that the sequences may overlap:
 *
 *                                offset
 *                         --------------------
 *                         |                  |
 *                         B[1...len]         A[1...len]
 *
 * Decoding proceeds as follows:
 *
 *                      do {
 *                              *A++ = *B++;
 *                      } while (--length);
 *
 * On the other hand, a delta match consists of a "span" as well as a length and
 * offset.  A delta match can be visualized as follows, with the caveat that the
 * various sequences may overlap:
 *
 *                                       offset
 *                            -----------------------------
 *                            |                           |
 *                    span    |                   span    |
 *                -------------               -------------
 *                |           |               |           |
 *                D[1...len]  C[1...len]      B[1...len]  A[1...len]
 *
 * Decoding proceeds as follows:
 *
 *                      do {
 *                              *A++ = *B++ + *C++ - *D++;
 *                      } while (--length);
 *
 * A delta match asserts that the bytewise differences of the A and B sequences
 * are equal to the bytewise differences of the C and D sequences.  The
 * sequences within each pair are separated by the same number of bytes, the
 * "span".  The inter-pair distance is the "offset".  In LZMS, spans are
 * restricted to powers of 2 between 2**0 and 2**7 inclusively.  Offsets are
 * restricted to multiples of the span.  The stored value for the offset is the
 * "raw offset", which is the real offset divided by the span.
 *
 * Delta matches can cover data containing a series of power-of-2 sized integers
 * that is linearly increasing or decreasing.  Another way of thinking about it
 * is that a delta match can match a longer sequence that is interrupted by a
 * non-matching byte, provided that the non-matching byte is a continuation of a
 * linearly changing pattern.  Examples of files that may contain data like this
 * are uncompressed bitmap images, uncompressed digital audio, and Unicode data
 * tables.  To some extent, this match type is a replacement for delta filters
 * or multimedia filters that are sometimes used in other compression software
 * (e.g.  'xz --delta --lzma2').  However, on most types of files, delta matches
 * do not seem to be very useful.
 *
 * Both LZ and delta matches may use overlapping sequences.  Therefore, they
 * must be decoded as if only one byte is copied at a time.
 *
 * For both LZ and delta matches, any match length in [1, 1073809578] can be
 * represented.  Similarly, any match offset in [1, 1180427428] can be
 * represented.  For delta matches, this range applies to the raw offset, so the
 * real offset may be larger.
 *
 * For LZ matches, up to 3 repeat offsets are allowed, similar to some other
 * LZ-based formats such as LZX and LZMA.  They must updated in an LRU fashion,
 * except for a quirk: inserting anything to the front of the queue must be
 * delayed by one LZMS item.  The reason for this is presumably that there is
 * almost no reason to code the same match offset twice in a row, since you
 * might as well have coded a longer match at that offset.  For this same
 * reason, it also is a requirement that when an offset in the queue is used,
 * that offset is removed from the queue immediately (and made pending for
 * front-insertion after the following decoded item), and everything to the
 * right is shifted left one queue slot.  This creates a need for an "overflow"
 * fourth entry in the queue, even though it is only possible to decode
 * references to the first 3 entries at any given time.  The queue must be
 * initialized to the offsets {1, 2, 3, 4}.
 *
 * Repeat delta matches are handled similarly, but for them the queue contains
 * (power, raw offset) pairs.  This queue must be initialized to
 * {(0, 1), (0, 2), (0, 3), (0, 4)}.
 *
 * Bits from the binary range decoder must be used to disambiguate item types.
 * The range decoder must hold two state variables: the range, which must
 * initially be set to 0xffffffff, and the current code, which must initially be
 * set to the first 32 bits read from the forwards bitstream.  The range must be
 * maintained above 0xffff; when it falls below 0xffff, both the range and code
 * must be left-shifted by 16 bits and the low 16 bits of the code must be
 * filled in with the next 16 bits from the forwards bitstream.
 *
 * To decode each bit, the binary range decoder requires a probability that is
 * logically a real number between 0 and 1.  Multiplying this probability by the
 * current range and taking the floor gives the bound between the 0-bit region of
 * the range and the 1-bit region of the range.  However, in LZMS, probabilities
 * are restricted to values of n/64 where n is an integer is between 1 and 63
 * inclusively, so the implementation may use integer operations instead.
 * Following calculation of the bound, if the current code is in the 0-bit
 * region, the new range becomes the current code and the decoded bit is 0;
 * otherwise, the bound must be subtracted from both the range and the code, and
 * the decoded bit is 1.  More information about range coding can be found at
 * https://en.wikipedia.org/wiki/Range_encoding.  Furthermore, note that the
 * LZMA format also uses range coding and has public domain code available for
 * it.
 *
 * The probability used to range-decode each bit must be taken from a table, of
 * which one instance must exist for each distinct context, or "binary decision
 * class", in which a range-decoded bit is needed.  At each call of the range
 * decoder, the appropriate probability must be obtained by indexing the
 * appropriate probability table with the last 4 (in the context disambiguating
 * literals from matches), 5 (in the context disambiguating LZ matches from
 * delta matches), or 6 (in all other contexts) bits recently range-decoded in
 * that context, ordered such that the most recently decoded bit is the
 * low-order bit of the index.
 *
 * Furthermore, each probability entry itself is variable, as its value must be
 * maintained as n/64 where n is the number of 0 bits in the most recently
 * decoded 64 bits with that same entry.  This allows the compressed
 * representation to adapt to the input and use fewer bits to represent the most
 * likely data; note that LZMA uses a similar scheme.  Initially, the most
 * recently 64 decoded bits for each probability entry are assumed to be
 * 0x0000000055555555 (high order to low order); therefore, all probabilities
 * are initially 48/64.  During the course of decoding, each probability may be
 * updated to as low as 0/64 (as a result of reading many consecutive 1 bits
 * with that entry) or as high as 64/64 (as a result of reading many consecutive
 * 0 bits with that entry); however, probabilities of 0/64 and 64/64 cannot be
 * used as-is but rather must be adjusted to 1/64 and 63/64, respectively,
 * before being used for range decoding.
 *
 * Representations of the LZMS items themselves must be read from the backwards
 * bitstream.  For this, there are 5 different Huffman codes used:
 *
 *  - The literal code, used for decoding literal bytes.  Each of the 256
 *    symbols represents a literal byte.  This code must be rebuilt whenever
 *    1024 symbols have been decoded with it.
 *
 *  - The LZ offset code, used for decoding the offsets of standard LZ77
 *    matches.  Each symbol represents an offset slot, which corresponds to a
 *    base value and some number of extra bits which must be read and added to
 *    the base value to reconstitute the full offset.  The number of symbols in
 *    this code is the number of offset slots needed to represent all possible
 *    offsets in the uncompressed block.  This code must be rebuilt whenever
 *    1024 symbols have been decoded with it.
 *
 *  - The length code, used for decoding length symbols.  Each of the 54 symbols
 *    represents a length slot, which corresponds to a base value and some
 *    number of extra bits which must be read and added to the base value to
 *    reconstitute the full length.  This code must be rebuilt whenever 512
 *    symbols have been decoded with it.
 *
 *  - The delta offset code, used for decoding the raw offsets of delta matches.
 *    Each symbol corresponds to an offset slot, which corresponds to a base
 *    value and some number of extra bits which must be read and added to the
 *    base value to reconstitute the full raw offset.  The number of symbols in
 *    this code is equal to the number of symbols in the LZ offset code.  This
 *    code must be rebuilt whenever 1024 symbols have been decoded with it.
 *
 *  - The delta power code, used for decoding the powers of delta matches.  Each
 *    of the 8 symbols corresponds to a power.  This code must be rebuilt
 *    whenever 512 symbols have been decoded with it.
 *
 * Initially, each Huffman code must be built assuming that each symbol in that
 * code has frequency 1.  Following that, each code must be rebuilt each time a
 * certain number of symbols, as noted above, has been decoded with it.  The
 * symbol frequencies for a code must be halved after each rebuild of that code;
 * this makes the codes adapt to the more recent data.
 *
 * Like other compression formats such as XPRESS, LZX, and DEFLATE, the LZMS
 * format requires that all Huffman codes be constructed in canonical form.
 * This form requires that same-length codewords be lexicographically ordered
 * the same way as the corresponding symbols and that all shorter codewords
 * lexicographically precede longer codewords.  Such a code can be constructed
 * directly from codeword lengths.
 *
 * Even with the canonical code restriction, the same frequencies can be used to
 * construct multiple valid Huffman codes.  Therefore, the decompressor needs to
 * construct the right one.  Specifically, the LZMS format requires that the
 * Huffman code be constructed as if the well-known priority queue algorithm is
 * used and frequency ties are always broken in favor of leaf nodes.
 *
 * Codewords in LZMS are guaranteed to not exceed 15 bits.  The format otherwise
 * places no restrictions on codeword length.  Therefore, the Huffman code
 * construction algorithm that a correct LZMS decompressor uses need not
 * implement length-limited code construction.  But if it does (e.g. by virtue
 * of being shared among multiple compression algorithms), the details of how it
 * does so are unimportant, provided that the maximum codeword length parameter
 * is set to at least 15 bits.
 *
 * After all LZMS items have been decoded, the data must be postprocessed to
 * translate absolute address encoded in x86 instructions into their original
 * relative addresses.
 *
 * Details omitted above can be found in the code.  Note that in the absence of
 * an official specification there is no guarantee that this decompressor
 * handles all possible cases.
 */

#ifdef HAVE_CONFIG_H
#  include "config.h"
#endif

#include "wimlib/compress_common.h"
#include "wimlib/decompress_common.h"
#include "wimlib/decompressor_ops.h"
#include "wimlib/error.h"
#include "wimlib/lzms_common.h"
#include "wimlib/util.h"

/* The TABLEBITS values can be changed; they only affect decoding speed.  */
#define LZMS_LITERAL_TABLEBITS          10
#define LZMS_LENGTH_TABLEBITS           10
#define LZMS_LZ_OFFSET_TABLEBITS        10
#define LZMS_DELTA_OFFSET_TABLEBITS     10
#define LZMS_DELTA_POWER_TABLEBITS      8

struct lzms_range_decoder {

        /* The relevant part of the current range.  Although the logical range
         * for range decoding is a very large integer, only a small portion
         * matters at any given time, and it can be normalized (shifted left)
         * whenever it gets too small.  */
        u32 range;

        /* The current position in the range encoded by the portion of the input
         * read so far.  */
        u32 code;

        /* Pointer to the next little-endian 16-bit integer in the compressed
         * input data (reading forwards).  */
        const le16 *next;

        /* Pointer to the end of the compressed input data.  */
        const le16 *end;
};

typedef u64 bitbuf_t;

struct lzms_input_bitstream {

        /* Holding variable for bits that have been read from the compressed
         * data.  The bit ordering is high to low.  */
        bitbuf_t bitbuf;

        /* Number of bits currently held in @bitbuf.  */
        unsigned bitsleft;

        /* Pointer to the one past the next little-endian 16-bit integer in the
         * compressed input data (reading backwards).  */
        const le16 *next;

        /* Pointer to the beginning of the compressed input data.  */
        const le16 *begin;
};

#define BITBUF_NBITS    (8 * sizeof(bitbuf_t))

/* Bookkeeping information for an adaptive Huffman code  */
struct lzms_huffman_rebuild_info {
        unsigned num_syms_until_rebuild;
        unsigned num_syms;
        unsigned rebuild_freq;
        u32 *codewords;
        u32 *freqs;
        u16 *decode_table;
        unsigned table_bits;
};

struct lzms_decompressor {

        /* 'last_target_usages' is in union with everything else because it is
         * only used for postprocessing.  */
        union {
        struct {

        struct lzms_probabilites probs;

        u16 literal_decode_table[(1 << LZMS_LITERAL_TABLEBITS) +
                                 (2 * LZMS_NUM_LITERAL_SYMS)]
                _aligned_attribute(DECODE_TABLE_ALIGNMENT);
        u32 literal_freqs[LZMS_NUM_LITERAL_SYMS];
        struct lzms_huffman_rebuild_info literal_rebuild_info;

        u16 lz_offset_decode_table[(1 << LZMS_LZ_OFFSET_TABLEBITS) +
                                   ( 2 * LZMS_MAX_NUM_OFFSET_SYMS)]
                _aligned_attribute(DECODE_TABLE_ALIGNMENT);
        u32 lz_offset_freqs[LZMS_MAX_NUM_OFFSET_SYMS];
        struct lzms_huffman_rebuild_info lz_offset_rebuild_info;

        u16 length_decode_table[(1 << LZMS_LENGTH_TABLEBITS) +
                                (2 * LZMS_NUM_LENGTH_SYMS)]
                _aligned_attribute(DECODE_TABLE_ALIGNMENT);
        u32 length_freqs[LZMS_NUM_LENGTH_SYMS];
        struct lzms_huffman_rebuild_info length_rebuild_info;

        u16 delta_offset_decode_table[(1 << LZMS_DELTA_OFFSET_TABLEBITS) +
                                      (2 * LZMS_MAX_NUM_OFFSET_SYMS)]
                _aligned_attribute(DECODE_TABLE_ALIGNMENT);
        u32 delta_offset_freqs[LZMS_MAX_NUM_OFFSET_SYMS];
        struct lzms_huffman_rebuild_info delta_offset_rebuild_info;

        u16 delta_power_decode_table[(1 << LZMS_DELTA_POWER_TABLEBITS) +
                                     (2 * LZMS_NUM_DELTA_POWER_SYMS)]
                _aligned_attribute(DECODE_TABLE_ALIGNMENT);
        u32 delta_power_freqs[LZMS_NUM_DELTA_POWER_SYMS];
        struct lzms_huffman_rebuild_info delta_power_rebuild_info;

        u32 codewords[LZMS_MAX_NUM_SYMS];

        }; // struct

        s32 last_target_usages[65536];

        }; // union
};

/* Initialize the input bitstream @is to read backwards from the compressed data
 * buffer @in that is @count 16-bit integers long.  */
static void
lzms_input_bitstream_init(struct lzms_input_bitstream *is,
                          const le16 *in, size_t count)
{
        is->bitbuf = 0;
        is->bitsleft = 0;
        is->next = in + count;
        is->begin = in;
}

/* Ensure that at least @num_bits bits are in the bitbuffer variable.
 * @num_bits cannot be more than 32.  */
static inline void
lzms_ensure_bits(struct lzms_input_bitstream *is, unsigned num_bits)
{
        unsigned avail;

        if (is->bitsleft >= num_bits)
                return;

        avail = BITBUF_NBITS - is->bitsleft;

        if (UNALIGNED_ACCESS_IS_FAST && CPU_IS_LITTLE_ENDIAN &&
            WORDSIZE == 8 && likely((u8 *)is->next - (u8 *)is->begin >= 8))
        {
                is->next -= avail >> 4;
                is->bitbuf |= load_u64_unaligned(is->next) << (avail & 15);
                is->bitsleft += avail & ~15;
        } else {
                if (likely(is->next != is->begin))
                        is->bitbuf |= (bitbuf_t)le16_to_cpu(*--is->next)
                                        << (avail - 16);
                if (likely(is->next != is->begin))
                        is->bitbuf |=(bitbuf_t)le16_to_cpu(*--is->next)
                                        << (avail - 32);
                is->bitsleft += 32;
        }
}

/* Get @num_bits bits from the bitbuffer variable.  */
static inline bitbuf_t
lzms_peek_bits(struct lzms_input_bitstream *is, unsigned num_bits)
{
        return (is->bitbuf >> 1) >> (BITBUF_NBITS - num_bits - 1);
}

/* Remove @num_bits bits from the bitbuffer variable.  */
static inline void
lzms_remove_bits(struct lzms_input_bitstream *is, unsigned num_bits)
{
        is->bitbuf <<= num_bits;
        is->bitsleft -= num_bits;
}

/* Remove and return @num_bits bits from the bitbuffer variable.  */
static inline bitbuf_t
lzms_pop_bits(struct lzms_input_bitstream *is, unsigned num_bits)
{
        bitbuf_t bits = lzms_peek_bits(is, num_bits);
        lzms_remove_bits(is, num_bits);
        return bits;
}

/* Read @num_bits bits from the input bitstream.  */
static inline bitbuf_t
lzms_read_bits(struct lzms_input_bitstream *is, unsigned num_bits)
{
        lzms_ensure_bits(is, num_bits);
        return lzms_pop_bits(is, num_bits);
}

/* Initialize the range decoder @rd to read forwards from the compressed data
 * buffer @in that is @count 16-bit integers long.  */
static void
lzms_range_decoder_init(struct lzms_range_decoder *rd,
                        const le16 *in, size_t count)
{
        rd->range = 0xffffffff;
        rd->code = ((u32)le16_to_cpu(in[0]) << 16) | le16_to_cpu(in[1]);
        rd->next = in + 2;
        rd->end = in + count;
}

/*
 * Decode a bit using the range coder.  The current state specifies the
 * probability entry to use.  The state and probability entry will be updated
 * based on the decoded bit.
 */
static inline int
lzms_decode_bit(struct lzms_range_decoder *rd, u32 *state_p, u32 num_states,
                struct lzms_probability_entry *probs)
{
        struct lzms_probability_entry *prob_entry;
        u32 prob;
        u32 bound;

        /* Load the probability entry corresponding to the current state.  */
        prob_entry = &probs[*state_p];

        /* Update the state early.  We'll still need to OR the state with 1
         * later if the decoded bit is a 1.  */
        *state_p = (*state_p << 1) & (num_states - 1);

        /* Get the probability (out of LZMS_PROBABILITY_DENOMINATOR) that the
         * next bit is 0.  */
        prob = lzms_get_probability(prob_entry);

        /* Normalize if needed.  */
        if (!(rd->range & 0xFFFF0000)) {
                rd->range <<= 16;
                rd->code <<= 16;
                if (likely(rd->next != rd->end))
                        rd->code |= le16_to_cpu(*rd->next++);
        }

        /* Based on the probability, calculate the bound between the 0-bit
         * region and the 1-bit region of the range.  */
        bound = (rd->range >> LZMS_PROBABILITY_BITS) * prob;

        if (rd->code < bound) {
                /* Current code is in the 0-bit region of the range.  */
                rd->range = bound;

                /* Update the state and probability entry based on the decoded bit.  */
                lzms_update_probability_entry(prob_entry, 0);
                return 0;
        } else {
                /* Current code is in the 1-bit region of the range.  */
                rd->range -= bound;
                rd->code -= bound;

                /* Update the state and probability entry based on the decoded bit.  */
                lzms_update_probability_entry(prob_entry, 1);
                *state_p |= 1;
                return 1;
        }
}

static void
lzms_build_huffman_code(struct lzms_huffman_rebuild_info *rebuild_info)
{
        make_canonical_huffman_code(rebuild_info->num_syms,
                                    LZMS_MAX_CODEWORD_LENGTH,
                                    rebuild_info->freqs,
                                    (u8 *)rebuild_info->decode_table,
                                    rebuild_info->codewords);

        make_huffman_decode_table(rebuild_info->decode_table,
                                  rebuild_info->num_syms,
                                  rebuild_info->table_bits,
                                  (u8 *)rebuild_info->decode_table,
                                  LZMS_MAX_CODEWORD_LENGTH);

        rebuild_info->num_syms_until_rebuild = rebuild_info->rebuild_freq;
}

static void
lzms_init_huffman_code(struct lzms_huffman_rebuild_info *rebuild_info,
                       unsigned num_syms, unsigned rebuild_freq,
                       u32 *codewords, u32 *freqs,
                       u16 *decode_table, unsigned table_bits)
{
        rebuild_info->num_syms = num_syms;
        rebuild_info->rebuild_freq = rebuild_freq;
        rebuild_info->codewords = codewords;
        rebuild_info->freqs = freqs;
        rebuild_info->decode_table = decode_table;
        rebuild_info->table_bits = table_bits;
        lzms_init_symbol_frequencies(freqs, num_syms);
        lzms_build_huffman_code(rebuild_info);
}

static void
lzms_init_huffman_codes(struct lzms_decompressor *d, unsigned num_offset_slots)
{
        lzms_init_huffman_code(&d->literal_rebuild_info,
                               LZMS_NUM_LITERAL_SYMS,
                               LZMS_LITERAL_CODE_REBUILD_FREQ,
                               d->codewords,
                               d->literal_freqs,
                               d->literal_decode_table,
                               LZMS_LITERAL_TABLEBITS);

        lzms_init_huffman_code(&d->lz_offset_rebuild_info,
                               num_offset_slots,
                               LZMS_LZ_OFFSET_CODE_REBUILD_FREQ,
                               d->codewords,
                               d->lz_offset_freqs,
                               d->lz_offset_decode_table,
                               LZMS_LZ_OFFSET_TABLEBITS);

        lzms_init_huffman_code(&d->length_rebuild_info,
                               LZMS_NUM_LENGTH_SYMS,
                               LZMS_LENGTH_CODE_REBUILD_FREQ,
                               d->codewords,
                               d->length_freqs,
                               d->length_decode_table,
                               LZMS_LENGTH_TABLEBITS);

        lzms_init_huffman_code(&d->delta_offset_rebuild_info,
                               num_offset_slots,
                               LZMS_DELTA_OFFSET_CODE_REBUILD_FREQ,
                               d->codewords,
                               d->delta_offset_freqs,
                               d->delta_offset_decode_table,
                               LZMS_DELTA_OFFSET_TABLEBITS);

        lzms_init_huffman_code(&d->delta_power_rebuild_info,
                               LZMS_NUM_DELTA_POWER_SYMS,
                               LZMS_DELTA_POWER_CODE_REBUILD_FREQ,
                               d->codewords,
                               d->delta_power_freqs,
                               d->delta_power_decode_table,
                               LZMS_DELTA_POWER_TABLEBITS);
}

static noinline void
lzms_rebuild_huffman_code(struct lzms_huffman_rebuild_info *rebuild_info)
{
        lzms_build_huffman_code(rebuild_info);
        lzms_dilute_symbol_frequencies(rebuild_info->freqs, rebuild_info->num_syms);
}

static inline unsigned
lzms_decode_huffman_symbol(struct lzms_input_bitstream *is, u16 decode_table[],
                           unsigned table_bits, u32 freqs[],
                           struct lzms_huffman_rebuild_info *rebuild_info)
{
        unsigned key_bits;
        unsigned entry;
        unsigned sym;

        lzms_ensure_bits(is, LZMS_MAX_CODEWORD_LENGTH);

        /* Index the decode table by the next table_bits bits of the input.  */
        key_bits = lzms_peek_bits(is, table_bits);
        entry = decode_table[key_bits];
        if (likely(entry < 0xC000)) {
                /* Fast case: The decode table directly provided the symbol and
                 * codeword length.  The low 11 bits are the symbol, and the
                 * high 5 bits are the codeword length.  */
                lzms_remove_bits(is, entry >> 11);
                sym = entry & 0x7FF;
        } else {
                /* Slow case: The codeword for the symbol is longer than
                 * table_bits, so the symbol does not have an entry directly in
                 * the first (1 << table_bits) entries of the decode table.
                 * Traverse the appropriate binary tree bit-by-bit in order to
                 * decode the symbol.  */
                lzms_remove_bits(is, table_bits);
                do {
                        key_bits = (entry & 0x3FFF) + lzms_pop_bits(is, 1);
                } while ((entry = decode_table[key_bits]) >= 0xC000);
                sym = entry;
        }

        freqs[sym]++;
        if (--rebuild_info->num_syms_until_rebuild == 0)
                lzms_rebuild_huffman_code(rebuild_info);
        return sym;
}

static inline unsigned
lzms_decode_literal(struct lzms_decompressor *d,
                    struct lzms_input_bitstream *is)
{
        return lzms_decode_huffman_symbol(is,
                                          d->literal_decode_table,
                                          LZMS_LITERAL_TABLEBITS,
                                          d->literal_freqs,
                                          &d->literal_rebuild_info);
}

static inline u32
lzms_decode_lz_offset(struct lzms_decompressor *d,
                      struct lzms_input_bitstream *is)
{
        unsigned slot = lzms_decode_huffman_symbol(is,
                                                   d->lz_offset_decode_table,
                                                   LZMS_LZ_OFFSET_TABLEBITS,
                                                   d->lz_offset_freqs,
                                                   &d->lz_offset_rebuild_info);
        return lzms_offset_slot_base[slot] +
               lzms_read_bits(is, lzms_extra_offset_bits[slot]);
}

static inline u32
lzms_decode_length(struct lzms_decompressor *d,
                   struct lzms_input_bitstream *is)
{
        unsigned slot = lzms_decode_huffman_symbol(is,
                                                   d->length_decode_table,
                                                   LZMS_LENGTH_TABLEBITS,
                                                   d->length_freqs,
                                                   &d->length_rebuild_info);
        u32 length = lzms_length_slot_base[slot];
        unsigned num_extra_bits = lzms_extra_length_bits[slot];
        /* Usually most lengths are short and have no extra bits.  */
        if (num_extra_bits)
                length += lzms_read_bits(is, num_extra_bits);
        return length;
}

static inline u32
lzms_decode_delta_offset(struct lzms_decompressor *d,
                         struct lzms_input_bitstream *is)
{
        unsigned slot = lzms_decode_huffman_symbol(is,
                                                   d->delta_offset_decode_table,
                                                   LZMS_DELTA_OFFSET_TABLEBITS,
                                                   d->delta_offset_freqs,
                                                   &d->delta_offset_rebuild_info);
        return lzms_offset_slot_base[slot] +
               lzms_read_bits(is, lzms_extra_offset_bits[slot]);
}

static inline unsigned
lzms_decode_delta_power(struct lzms_decompressor *d,
                        struct lzms_input_bitstream *is)
{
        return lzms_decode_huffman_symbol(is,
                                          d->delta_power_decode_table,
                                          LZMS_DELTA_POWER_TABLEBITS,
                                          d->delta_power_freqs,
                                          &d->delta_power_rebuild_info);
}

static int
lzms_create_decompressor(size_t max_bufsize, void **d_ret)
{
        struct lzms_decompressor *d;

        if (max_bufsize > LZMS_MAX_BUFFER_SIZE)
                return WIMLIB_ERR_INVALID_PARAM;

        d = ALIGNED_MALLOC(sizeof(struct lzms_decompressor),
                           DECODE_TABLE_ALIGNMENT);
        if (!d)
                return WIMLIB_ERR_NOMEM;

        *d_ret = d;
        return 0;
}

/*
 * Decompress @in_nbytes bytes of LZMS-compressed data at @in and write the
 * uncompressed data, which had original size @out_nbytes, to @out.  Return 0 if
 * successful or -1 if the compressed data is invalid.
 */
static int
lzms_decompress(const void * const restrict in, const size_t in_nbytes,
                void * const restrict out, const size_t out_nbytes,
                void * const restrict _d)
{
        struct lzms_decompressor *d = _d;
        u8 *out_next = out;
        u8 * const out_end = out + out_nbytes;
        struct lzms_range_decoder rd;
        struct lzms_input_bitstream is;

        /* LRU queues for match sources  */
        u32 recent_lz_offsets[LZMS_NUM_LZ_REPS + 1];
        u64 recent_delta_pairs[LZMS_NUM_DELTA_REPS + 1];

        /* Previous item type: 0 = literal, 1 = LZ match, 2 = delta match.
         * This is used to handle delayed updates of the LRU queues.  Instead of
         * actually delaying the updates, we can check when decoding each rep
         * match whether a delayed update needs to be taken into account, and if
         * so get the match source from slot 'rep_idx + 1' instead of from slot
         * 'rep_idx'.  */
        unsigned prev_item_type = 0;

        /* States and probability entries for item type disambiguation  */
        u32 main_state = 0;
        u32 match_state = 0;
        u32 lz_state = 0;
        u32 delta_state = 0;
        u32 lz_rep_states[LZMS_NUM_LZ_REP_DECISIONS] = {};
        u32 delta_rep_states[LZMS_NUM_DELTA_REP_DECISIONS] = {};

        /*
         * Requirements on the compressed data:
         *
         * 1. LZMS-compressed data is a series of 16-bit integers, so the
         *    compressed data buffer cannot take up an odd number of bytes.
         * 2. To prevent poor performance on some architectures, we require that
         *    the compressed data buffer is 2-byte aligned.
         * 3. There must be at least 4 bytes of compressed data, since otherwise
         *    we cannot even initialize the range decoder.
         */
        if ((in_nbytes & 1) || ((uintptr_t)in & 1) || (in_nbytes < 4))
                return -1;

        lzms_range_decoder_init(&rd, in, in_nbytes / sizeof(le16));

        lzms_input_bitstream_init(&is, in, in_nbytes / sizeof(le16));

        lzms_init_probabilities(&d->probs);

        lzms_init_huffman_codes(d, lzms_get_num_offset_slots(out_nbytes));

        for (int i = 0; i < LZMS_NUM_LZ_REPS + 1; i++)
                recent_lz_offsets[i] = i + 1;

        for (int i = 0; i < LZMS_NUM_DELTA_REPS + 1; i++)
                recent_delta_pairs[i] = i + 1;

        /* Main decode loop  */
        while (out_next != out_end) {

                if (!lzms_decode_bit(&rd, &main_state,
                                     LZMS_NUM_MAIN_PROBS, d->probs.main))
                {
                        /* Literal  */
                        *out_next++ = lzms_decode_literal(d, &is);
                        prev_item_type = 0;

                } else if (!lzms_decode_bit(&rd, &match_state,
                                            LZMS_NUM_MATCH_PROBS,
                                            d->probs.match))
                {
                        /* LZ match  */

                        u32 offset;
                        u32 length;

                        STATIC_ASSERT(LZMS_NUM_LZ_REPS == 3);

                        if (!lzms_decode_bit(&rd, &lz_state,
                                             LZMS_NUM_LZ_PROBS, d->probs.lz))
                        {
                                /* Explicit offset  */
                                offset = lzms_decode_lz_offset(d, &is);

                                recent_lz_offsets[3] = recent_lz_offsets[2];
                                recent_lz_offsets[2] = recent_lz_offsets[1];
                                recent_lz_offsets[1] = recent_lz_offsets[0];
                        } else {
                                /* Repeat offset  */

                                if (!lzms_decode_bit(&rd, &lz_rep_states[0],
                                                     LZMS_NUM_LZ_REP_PROBS,
                                                     d->probs.lz_rep[0]))
                                {
                                        offset = recent_lz_offsets[0 + (prev_item_type & 1)];
                                        recent_lz_offsets[0 + (prev_item_type & 1)] = recent_lz_offsets[0];
                                } else if (!lzms_decode_bit(&rd, &lz_rep_states[1],
                                                            LZMS_NUM_LZ_REP_PROBS,
                                                            d->probs.lz_rep[1]))
                                {
                                        offset = recent_lz_offsets[1 + (prev_item_type & 1)];
                                        recent_lz_offsets[1 + (prev_item_type & 1)] = recent_lz_offsets[1];
                                        recent_lz_offsets[1] = recent_lz_offsets[0];
                                } else {
                                        offset = recent_lz_offsets[2 + (prev_item_type & 1)];
                                        recent_lz_offsets[2 + (prev_item_type & 1)] = recent_lz_offsets[2];
                                        recent_lz_offsets[2] = recent_lz_offsets[1];
                                        recent_lz_offsets[1] = recent_lz_offsets[0];
                                }
                        }
                        recent_lz_offsets[0] = offset;
                        prev_item_type = 1;

                        length = lzms_decode_length(d, &is);

                        if (unlikely(length > out_end - out_next))
                                return -1;
                        if (unlikely(offset > out_next - (u8 *)out))
                                return -1;

                        lz_copy(out_next, length, offset, out_end, LZMS_MIN_MATCH_LENGTH);
                        out_next += length;
                } else {
                        /* Delta match  */

                        /* (See beginning of file for more information.)  */

                        u32 power;
                        u32 raw_offset;
                        u32 span;
                        u32 offset;
                        const u8 *matchptr;
                        u32 length;
                        u64 pair;

                        STATIC_ASSERT(LZMS_NUM_DELTA_REPS == 3);

                        if (!lzms_decode_bit(&rd, &delta_state,
                                             LZMS_NUM_DELTA_PROBS,
                                             d->probs.delta))
                        {
                                /* Explicit offset  */
                                power = lzms_decode_delta_power(d, &is);
                                raw_offset = lzms_decode_delta_offset(d, &is);

                                pair = ((u64)power << 32) | raw_offset;
                                recent_delta_pairs[3] = recent_delta_pairs[2];
                                recent_delta_pairs[2] = recent_delta_pairs[1];
                                recent_delta_pairs[1] = recent_delta_pairs[0];
                        } else {
                                if (!lzms_decode_bit(&rd, &delta_rep_states[0],
                                                     LZMS_NUM_DELTA_REP_PROBS,
                                                     d->probs.delta_rep[0]))
                                {
                                        pair = recent_delta_pairs[0 + (prev_item_type >> 1)];
                                        recent_delta_pairs[0 + (prev_item_type >> 1)] = recent_delta_pairs[0];
                                } else if (!lzms_decode_bit(&rd, &delta_rep_states[1],
                                                            LZMS_NUM_DELTA_REP_PROBS,
                                                            d->probs.delta_rep[1]))
                                {
                                        pair = recent_delta_pairs[1 + (prev_item_type >> 1)];
                                        recent_delta_pairs[1 + (prev_item_type >> 1)] = recent_delta_pairs[1];
                                        recent_delta_pairs[1] = recent_delta_pairs[0];
                                } else {
                                        pair = recent_delta_pairs[2 + (prev_item_type >> 1)];
                                        recent_delta_pairs[2 + (prev_item_type >> 1)] = recent_delta_pairs[2];
                                        recent_delta_pairs[2] = recent_delta_pairs[1];
                                        recent_delta_pairs[1] = recent_delta_pairs[0];
                                }

                                power = pair >> 32;
                                raw_offset = (u32)pair;
                        }
                        recent_delta_pairs[0] = pair;
                        prev_item_type = 2;

                        length = lzms_decode_length(d, &is);

                        span = (u32)1 << power;
                        offset = raw_offset << power;

                        /* raw_offset<<power overflows?  */
                        if (unlikely(offset >> power != raw_offset))
                                return -1;

                        /* offset+span overflows?  */
                        if (unlikely(offset + span < offset))
                                return -1;

                        /* buffer underrun?  */
                        if (unlikely(offset + span > out_next - (u8 *)out))
                                return -1;

                        /* buffer overrun?  */
                        if (unlikely(length > out_end - out_next))
                                return -1;

                        matchptr = out_next - offset;
                        do {
                                *out_next = *matchptr + *(out_next - span) -
                                            *(matchptr - span);
                                out_next++;
                                matchptr++;
                        } while (--length);
                }
        }

        lzms_x86_filter(out, out_nbytes, d->last_target_usages, true);
        return 0;
}

static void
lzms_free_decompressor(void *_d)
{
        struct lzms_decompressor *d = _d;

        ALIGNED_FREE(d);
}

const struct decompressor_ops lzms_decompressor_ops = {
        .create_decompressor  = lzms_create_decompressor,
        .decompress           = lzms_decompress,
        .free_decompressor    = lzms_free_decompressor,
};