lzms-decompress.c: Fix comments

[wimlib] / src / lzms-decompress.c

/*
 * lzms-decompress.c
 *
 * A decompressor for the LZMS compression format.
 */

/*
 * Copyright (C) 2013 Eric Biggers
 *
 * This file is part of wimlib, a library for working with WIM files.
 *
 * wimlib is free software; you can redistribute it and/or modify it under the
 * terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 3 of the License, or (at your option)
 * any later version.
 *
 * wimlib is distributed in the hope that it will be useful, but WITHOUT ANY
 * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
 * A PARTICULAR PURPOSE. See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License
 * along with wimlib; if not, see http://www.gnu.org/licenses/.
 */

/*
 * This is a decompressor for the LZMS compression format used by Microsoft.
 * This format is not documented, but it is one of the formats supported by the
 * compression API available in Windows 8, and as of Windows 8 it is one of the
 * formats that can be used in WIM files.
 *
 * This decompressor only implements "raw" decompression, which decompresses a
 * single LZMS-compressed block.  This behavior is the same as that of
 * Decompress() in the Windows 8 compression API when using a compression handle
 * created with CreateDecompressor() with the Algorithm parameter specified as
 * COMPRESS_ALGORITHM_LZMS | COMPRESS_RAW.  Presumably, non-raw LZMS data
 * is a container format from which the locations and sizes (both compressed and
 * uncompressed) of the constituent blocks can be determined.
 *
 * A LZMS-compressed block must be read in 16-bit little endian units from both
 * directions.  One logical bitstream starts at the front of the block and
 * proceeds forwards.  Another logical bitstream starts at the end of the block
 * and proceeds backwards.  Bits read from the forwards bitstream constitute
 * range-encoded data, whereas bits read from the backwards bitstream constitute
 * Huffman-encoded symbols or verbatim bits.  For both bitstreams, the ordering
 * of the bits within the 16-bit coding units is such that the first bit is the
 * high-order bit and the last bit is the low-order bit.
 *
 * From these two logical bitstreams, an LZMS decompressor can reconstitute the
 * series of items that make up the LZMS data representation.  Each such item
 * may be a literal byte or a match.  Matches may be either traditional LZ77
 * matches or "delta" matches, either of which can have its offset encoded
 * explicitly or encoded via a reference to a recently used (repeat) offset.
 *
 * A traditional LZ match consists of a length and offset; it asserts that the
 * sequence of bytes beginning at the current position and extending for the
 * length is exactly equal to the equal-length sequence of bytes at the offset
 * back in the window.  On the other hand, a delta match consists of a length,
 * raw offset, and power.  It asserts that the sequence of bytes beginning at
 * the current position and extending for the length is equal to the bytewise
 * sum of the two equal-length sequences of bytes (2**power) and (raw_offset *
 * 2**power) bytes before the current position, minus bytewise the sequence of
 * bytes beginning at (2**power + raw_offset * 2**power) bytes before the
 * current position.  Although not generally as useful as traditional LZ
 * matches, delta matches can be helpful on some types of data.  Both LZ and
 * delta matches may overlap with the current position; in fact, the minimum
 * offset is 1, regardless of match length.
 *
 * For LZ matches, up to 3 repeat offsets are allowed, similar to some other
 * LZ-based formats such as LZX and LZMA.  They must updated in a LRU fashion,
 * except for a quirk: updates to the queue must be delayed by one LZMS item,
 * except for the removal of a repeat match.  As a result, 4 entries are
 * actually needed in the queue, even though it is only possible to decode
 * references to the first 3 at any given time.  The queue must be initialized
 * to the offsets {1, 2, 3, 4}.
 *
 * Repeat delta matches are handled similarly, but for them there are two queues
 * updated in lock-step: one for powers and one for raw offsets.  The power
 * queue must be initialized to {0, 0, 0, 0}, and the raw offset queue must be
 * initialized to {1, 2, 3, 4}.
 *
 * Bits from the range decoder must be used to disambiguate item types.  The
 * range decoder must hold two state variables: the range, which must initially
 * be set to 0xffffffff, and the current code, which must initially be set to
 * the first 32 bits read from the forwards bitstream.  The range must be
 * maintained above 0xffff; when it falls below 0xffff, both the range and code
 * must be left-shifted by 16 bits and the low 16 bits of the code must be
 * filled in with the next 16 bits from the forwards bitstream.
 *
 * To decode each bit, the range decoder requires a probability that is
 * logically a real number between 0 and 1.  Multiplying this probability by the
 * current range and taking the floor gives the bound between the 0-bit region
 * of the range and the 1-bit region of the range.  However, in LZMS,
 * probabilities are restricted to values of n/64 where n is an integer is
 * between 1 and 63 inclusively, so the implementation may use integer
 * operations instead.  Following calculation of the bound, if the current code
 * is in the 0-bit region, the new range becomes the current code and the
 * decoded bit is 0; otherwise, the bound must be subtracted from both the range
 * and the code, and the decoded bit is 1.  More information about range coding
 * can be found at https://en.wikipedia.org/wiki/Range_encoding.  Furthermore,
 * note that the LZMA format also uses range coding and has public domain code
 * available for it.
 *
 * The probability used to range-decode each bit must be taken from a table, of
 * which one instance must exist for each distinct context in which a
 * range-decoded bit is needed.  At each call of the range decoder, the
 * appropriate probability must be obtained by indexing the appropriate
 * probability table with the last 4 (in the context disambiguating literals
 * from matches), 5 (in the context disambiguating LZ matches from delta
 * matches), or 6 (in all other contexts) bits recently range-decoded in that
 * context, ordered such that the most recently decoded bit is the low-order bit
 * of the index.
 *
 * Furthermore, each probability entry itself is variable, as its value must be
 * maintained as n/64 where n is the number of 0 bits in the most recently
 * decoded 64 bits with that same entry.  This allows the compressed
 * representation to adapt to the input and use fewer bits to represent the most
 * likely data; note that LZMA uses a similar scheme.  Initially, the most
 * recently 64 decoded bits for each probability entry are assumed to be
 * 0x0000000055555555 (high order to low order); therefore, all probabilities
 * are initially 48/64.  During the course of decoding, each probability may be
 * updated to as low as 0/64 (as a result of reading many consecutive 1 bits
 * with that entry) or as high as 64/64 (as a result of reading many consecutive
 * 0 bits with that entry); however, probabilities of 0/64 and 64/64 cannot be
 * used as-is but rather must be adjusted to 1/64 and 63/64, respectively,
 * before being used for range decoding.
 *
 * Representations of the LZMS items themselves must be read from the backwards
 * bitstream.  For this, there are 5 different Huffman codes used:
 *
 *  - The literal code, used for decoding literal bytes.  Each of the 256
 *    symbols represents a literal byte.  This code must be rebuilt whenever
 *    1024 symbols have been decoded with it.
 *
 *  - The LZ offset code, used for decoding the offsets of standard LZ77
 *    matches.  Each symbol represents a position slot, which corresponds to a
 *    base value and some number of extra bits which must be read and added to
 *    the base value to reconstitute the full offset.  The number of symbols in
 *    this code is the number of position slots needed to represent all possible
 *    offsets in the uncompressed block.  This code must be rebuilt whenever
 *    1024 symbols have been decoded with it.
 *
 *  - The length code, used for decoding length symbols.  Each of the 54 symbols
 *    represents a length slot, which corresponds to a base value and some
 *    number of extra bits which must be read and added to the base value to
 *    reconstitute the full length.  This code must be rebuilt whenever 512
 *    symbols have been decoded with it.
 *
 *  - The delta offset code, used for decoding the offsets of delta matches.
 *    Each symbol corresponds to a position slot, which corresponds to a base
 *    value and some number of extra bits which must be read and added to the
 *    base value to reconstitute the full offset.  The number of symbols in this
 *    code is equal to the number of symbols in the LZ offset code.  This code
 *    must be rebuilt whenever 1024 symbols have been decoded with it.
 *
 *  - The delta power code, used for decoding the powers of delta matches.  Each
 *    of the 8 symbols corresponds to a power.  This code must be rebuilt
 *    whenever 512 symbols have been decoded with it.
 *
 * All the LZMS Huffman codes must be built adaptively based on symbol
 * frequencies.  Initially, each code must be built assuming that all symbols
 * have equal frequency.  Following that, each code must be rebuilt whenever a
 * certain number of symbols has been decoded with it.
 *
 * In general, multiple valid Huffman codes can be constructed from a set of
 * symbol frequencies.  Like other compression formats such as XPRESS, LZX, and
 * DEFLATE, the LZMS format solves this ambiguity by requiring that all Huffman
 * codes be constructed in canonical form.  This form requires that same-length
 * codewords be lexicographically ordered the same way as the corresponding
 * symbols and that all shorter codewords lexicographically precede longer
 * codewords.
 *
 * Codewords in all the LZMS Huffman codes are limited to 15 bits.  If the
 * canonical code for a given set of symbol frequencies has any codewords longer
 * than 15 bits, then all frequencies must be divided by 2, rounding up, and the
 * code construction must be attempted again.
 *
 * A LZMS-compressed block seemingly cannot have a compressed size greater than
 * or equal to the uncompressed size.  In such cases the block must be stored
 * uncompressed.
 *
 * After all LZMS items have been decoded, the data must be postprocessed to
 * translate absolute address encoded in x86 instructions into their original
 * relative addresses.
 *
 * Details omitted above can be found in the code.  Note that in the absence of
 * an official specification there is no guarantee that this decompressor
 * handles all possible cases.
 */

#ifdef HAVE_CONFIG_H
#  include "config.h"
#endif

#include "wimlib.h"
#include "wimlib/compress.h"
#include "wimlib/decompress.h"
#include "wimlib/error.h"
#include "wimlib/lzms.h"
#include "wimlib/util.h"

#include <limits.h>
#include <pthread.h>

#define LZMS_DECODE_TABLE_BITS  10

/* Structure used for range decoding, reading bits forwards.  This is the first
 * logical bitstream mentioned above.  */
struct lzms_range_decoder_raw {
        /* The relevant part of the current range.  Although the logical range
         * for range decoding is a very large integer, only a small portion
         * matters at any given time, and it can be normalized (shifted left)
         * whenever it gets too small.  */
        u32 range;

        /* The current position in the range encoded by the portion of the input
         * read so far.  */
        u32 code;

        /* Pointer to the next little-endian 16-bit integer in the compressed
         * input data (reading forwards).  */
        const le16 *in;

        /* Number of 16-bit integers remaining in the compressed input data
         * (reading forwards).  */
        size_t num_le16_remaining;
};

/* Structure used for reading raw bits backwards.  This is the second logical
 * bitstream mentioned above.  */
struct lzms_input_bitstream {
        /* Holding variable for bits that have been read from the compressed
         * data.  The bits are ordered from high-order to low-order.  */
        /* XXX:  Without special-case code to handle reading more than 17 bits
         * at a time, this needs to be 64 bits rather than 32 bits.  */
        u64 bitbuf;

        /* Number of bits in @bitbuf that are are used.  */
        unsigned num_filled_bits;

        /* Pointer to the one past the next little-endian 16-bit integer in the
         * compressed input data (reading backwards).  */
        const le16 *in;

        /* Number of 16-bit integers remaining in the compressed input data
         * (reading backwards).  */
        size_t num_le16_remaining;
};

/* Probability entry for use by the range decoder when in a specific state.  */
struct lzms_probability_entry {

        /* Number of zeroes in the most recent LZMS_PROBABILITY_MAX bits that
         * have been decoded using this probability entry.  This is a cached
         * value because it can be computed as LZMS_PROBABILITY_MAX minus the
         * Hamming weight of the low-order LZMS_PROBABILITY_MAX bits of
         * @recent_bits.  */
        u32 num_recent_zero_bits;

        /* The most recent LZMS_PROBABILITY_MAX bits that have been decoded
         * using this probability entry.  The size of this variable, in bits,
         * must be at least LZMS_PROBABILITY_MAX.  */
        u64 recent_bits;
};

/* Structure used for range decoding.  This wraps around `struct
 * lzms_range_decoder_raw' to use and maintain probability entries.  */
struct lzms_range_decoder {
        /* Pointer to the raw range decoder, which has no persistent knowledge
         * of probabilities.  Multiple lzms_range_decoder's share the same
         * lzms_range_decoder_raw.  */
        struct lzms_range_decoder_raw *rd;

        /* Bits recently decoded by this range decoder.  This are used as in
         * index into @prob_entries.  */
        u32 state;

        /* Bitmask for @state to prevent its value from exceeding the number of
         * probability entries.  */
        u32 mask;

        /* Probability entries being used for this range decoder.  */
        struct lzms_probability_entry prob_entries[LZMS_MAX_NUM_STATES];
};

/* Structure used for Huffman decoding, optionally using the decoded symbols as
 * slots into a base table to determine how many extra bits need to be read to
 * reconstitute the full value.  */
struct lzms_huffman_decoder {

        /* Bitstream to read Huffman-encoded symbols and verbatim bits from.
         * Multiple lzms_huffman_decoder's share the same lzms_input_bitstream.
         */
        struct lzms_input_bitstream *is;

        /* Pointer to the slot base table to use.  It is indexed by the decoded
         * Huffman symbol that specifies the slot.  The entry specifies the base
         * value to use, and the position of its high bit is the number of
         * additional bits that must be read to reconstitute the full value.
         *
         * This member need not be set if only raw Huffman symbols are being
         * read using this decoder.  */
        const u32 *slot_base_tab;

        /* Number of symbols that have been read using this code far.  Reset to
         * 0 whenever the code is rebuilt.  */
        u32 num_syms_read;

        /* When @num_syms_read reaches this number, the Huffman code must be
         * rebuilt.  */
        u32 rebuild_freq;

        /* Number of symbols in the represented Huffman code.  */
        unsigned num_syms;

        /* Running totals of symbol frequencies.  These are diluted slightly
         * whenever the code is rebuilt.  */
        u32 sym_freqs[LZMS_MAX_NUM_SYMS];

        /* The length, in bits, of each symbol in the Huffman code.  */
        u8 lens[LZMS_MAX_NUM_SYMS];

        /* The codeword of each symbol in the Huffman code.  */
        u16 codewords[LZMS_MAX_NUM_SYMS];

        /* A table for quickly decoding symbols encoded using the Huffman code.
         */
        u16 decode_table[(1U << LZMS_DECODE_TABLE_BITS) + 2 * LZMS_MAX_NUM_SYMS]
                                _aligned_attribute(DECODE_TABLE_ALIGNMENT);
};

/* State of the LZMS decompressor.  */
struct lzms_decompressor {

        /* Pointer to the beginning of the uncompressed data buffer.  */
        u8 *out_begin;

        /* Pointer to the next position in the uncompressed data buffer.  */
        u8 *out_next;

        /* Pointer to one past the end of the uncompressed data buffer.  */
        u8 *out_end;

        /* Range decoder, which reads bits from the beginning of the compressed
         * block, going forwards.  */
        struct lzms_range_decoder_raw rd;

        /* Input bitstream, which reads from the end of the compressed block,
         * going backwards.  */
        struct lzms_input_bitstream is;

        /* Range decoders.  */
        struct lzms_range_decoder main_range_decoder;
        struct lzms_range_decoder match_range_decoder;
        struct lzms_range_decoder lz_match_range_decoder;
        struct lzms_range_decoder lz_repeat_match_range_decoders[LZMS_NUM_RECENT_OFFSETS - 1];
        struct lzms_range_decoder delta_match_range_decoder;
        struct lzms_range_decoder delta_repeat_match_range_decoders[LZMS_NUM_RECENT_OFFSETS - 1];

        /* Huffman decoders.  */
        struct lzms_huffman_decoder literal_decoder;
        struct lzms_huffman_decoder lz_offset_decoder;
        struct lzms_huffman_decoder length_decoder;
        struct lzms_huffman_decoder delta_power_decoder;
        struct lzms_huffman_decoder delta_offset_decoder;

        /* LRU (least-recently-used) queue of LZ match offsets.  */
        u64 recent_lz_offsets[LZMS_NUM_RECENT_OFFSETS + 1];

        /* LRU (least-recently-used) queue of delta match powers.  */
        u32 recent_delta_powers[LZMS_NUM_RECENT_OFFSETS + 1];

        /* LRU (least-recently-used) queue of delta match offsets.  */
        u32 recent_delta_offsets[LZMS_NUM_RECENT_OFFSETS + 1];

        /* These variables are used to delay updates to the LRU queues by one
         * decoded item.  */
        u32 prev_lz_offset;
        u32 prev_delta_power;
        u32 prev_delta_offset;
        u32 upcoming_lz_offset;
        u32 upcoming_delta_power;
        u32 upcoming_delta_offset;
};

/* A table that maps position slots to their base values.  These are constants
 * computed at runtime by lzms_compute_slot_bases().  */
static u32 lzms_position_slot_base[LZMS_MAX_NUM_OFFSET_SYMS + 1];

/* A table that maps length slots to their base values.  These are constants
 * computed at runtime by lzms_compute_slot_bases().  */
static u32 lzms_length_slot_base[LZMS_NUM_LEN_SYMS + 1];

static void
lzms_decode_delta_rle_slot_bases(u32 slot_bases[],
                                 const u8 delta_run_lens[], size_t num_run_lens)
{
        u32 delta = 1;
        u32 base = 0;
        size_t slot = 0;
        for (size_t i = 0; i < num_run_lens; i++) {
                u8 run_len = delta_run_lens[i];
                while (run_len--) {
                        base += delta;
                        slot_bases[slot++] = base;
                }
                delta <<= 1;
        }
}

/* Initialize the global position and length slot tables.  */
static void
lzms_compute_slot_bases(void)
{
        /* If an explicit formula that maps LZMS position and length slots to
         * slot bases exists, then it could be used here.  But until one is
         * found, the following code fills in the slots using the observation
         * that the increase from one slot base to the next is an increasing
         * power of 2.  Therefore, run-length encoding of the delta of adjacent
         * entries can be used.  */
        static const u8 position_slot_delta_run_lens[] = {
                9,   0,   9,   7,   10,  15,  15,  20,
                20,  30,  33,  40,  42,  45,  60,  73,
                80,  85,  95,  105, 6,
        };

        static const u8 length_slot_delta_run_lens[] = {
                27,  4,   6,   4,   5,   2,   1,   1,
                1,   1,   1,   0,   0,   0,   0,   0,
                1,
        };

        lzms_decode_delta_rle_slot_bases(lzms_position_slot_base,
                                         position_slot_delta_run_lens,
                                         ARRAY_LEN(position_slot_delta_run_lens));

        lzms_position_slot_base[LZMS_MAX_NUM_OFFSET_SYMS] = 0x7fffffff;

        lzms_decode_delta_rle_slot_bases(lzms_length_slot_base,
                                         length_slot_delta_run_lens,
                                         ARRAY_LEN(length_slot_delta_run_lens));

        lzms_length_slot_base[LZMS_NUM_LEN_SYMS] = 0x400108ab;
}

/* Initialize the global position length slot tables if not done so already.  */
static void
lzms_init_slot_bases(void)
{
        static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
        static bool already_computed = false;

        if (unlikely(!already_computed)) {
                pthread_mutex_lock(&mutex);
                if (!already_computed) {
                        lzms_compute_slot_bases();
                        already_computed = true;
                }
                pthread_mutex_unlock(&mutex);
        }
}

/* Return the position slot for the specified offset.  */
static u32
lzms_get_position_slot_raw(u32 offset)
{
        u32 position_slot = 0;
        while (lzms_position_slot_base[position_slot + 1] <= offset)
                position_slot++;
        return position_slot;
}

/* Initialize the input bitstream @is to read forwards from the specified
 * compressed data buffer @in that is @in_limit 16-bit integers long.  */
static void
lzms_input_bitstream_init(struct lzms_input_bitstream *is,
                          const le16 *in, size_t in_limit)
{
        is->bitbuf = 0;
        is->num_filled_bits = 0;
        is->in = in + in_limit;
        is->num_le16_remaining = in_limit;
}

/* Ensures that @num_bits bits are buffered in the input bitstream.  */
static int
lzms_input_bitstream_ensure_bits(struct lzms_input_bitstream *is,
                                 unsigned num_bits)
{
        while (is->num_filled_bits < num_bits) {
                u64 next;

                LZMS_ASSERT(is->num_filled_bits + 16 <= sizeof(is->bitbuf) * 8);

                if (unlikely(is->num_le16_remaining == 0))
                        return -1;

                next = le16_to_cpu(*--is->in);
                is->num_le16_remaining--;

                is->bitbuf |= next << (sizeof(is->bitbuf) * 8 - is->num_filled_bits - 16);
                is->num_filled_bits += 16;
        }
        return 0;

}

/* Returns the next @num_bits bits that are buffered in the input bitstream.  */
static u32
lzms_input_bitstream_peek_bits(struct lzms_input_bitstream *is,
                               unsigned num_bits)
{
        LZMS_ASSERT(is->num_filled_bits >= num_bits);
        return is->bitbuf >> (sizeof(is->bitbuf) * 8 - num_bits);
}

/* Removes the next @num_bits bits that are buffered in the input bitstream.  */
static void
lzms_input_bitstream_remove_bits(struct lzms_input_bitstream *is,
                                 unsigned num_bits)
{
        LZMS_ASSERT(is->num_filled_bits >= num_bits);
        is->bitbuf <<= num_bits;
        is->num_filled_bits -= num_bits;
}

/* Removes and returns the next @num_bits bits that are buffered in the input
 * bitstream.  */
static u32
lzms_input_bitstream_pop_bits(struct lzms_input_bitstream *is,
                              unsigned num_bits)
{
        u32 bits = lzms_input_bitstream_peek_bits(is, num_bits);
        lzms_input_bitstream_remove_bits(is, num_bits);
        return bits;
}

/* Reads the next @num_bits from the input bitstream.  */
static u32
lzms_input_bitstream_read_bits(struct lzms_input_bitstream *is,
                               unsigned num_bits)
{
        if (unlikely(lzms_input_bitstream_ensure_bits(is, num_bits)))
                return 0;
        return lzms_input_bitstream_pop_bits(is, num_bits);
}

/* Initialize the range decoder @rd to read forwards from the specified
 * compressed data buffer @in that is @in_limit 16-bit integers long.  */
static void
lzms_range_decoder_raw_init(struct lzms_range_decoder_raw *rd,
                            const le16 *in, size_t in_limit)
{
        rd->range = 0xffffffff;
        rd->code = ((u32)le16_to_cpu(in[0]) << 16) |
                   ((u32)le16_to_cpu(in[1]) <<  0);
        rd->in = in + 2;
        rd->num_le16_remaining = in_limit - 2;
}

/* Ensures the current range of the range decoder has at least 16 bits of
 * precision.  */
static int
lzms_range_decoder_raw_normalize(struct lzms_range_decoder_raw *rd)
{
        if (rd->range <= 0xffff) {
                rd->range <<= 16;
                if (unlikely(rd->num_le16_remaining == 0))
                        return -1;
                rd->code = (rd->code << 16) | le16_to_cpu(*rd->in++);
                rd->num_le16_remaining--;
        }
        return 0;
}

/* Decode and return the next bit from the range decoder (raw version).
 *
 * @prob is the chance out of LZMS_PROBABILITY_MAX that the next bit is 0.
 */
static int
lzms_range_decoder_raw_decode_bit(struct lzms_range_decoder_raw *rd, u32 prob)
{
        u32 bound;

        /* Ensure the range has at least 16 bits of precision.  */
        lzms_range_decoder_raw_normalize(rd);

        /* Based on the probability, calculate the bound between the 0-bit
         * region and the 1-bit region of the range.  */
        bound = (rd->range >> LZMS_PROBABILITY_BITS) * prob;

        if (rd->code < bound) {
                /* Current code is in the 0-bit region of the range.  */
                rd->range = bound;
                return 0;
        } else {
                /* Current code is in the 1-bit region of the range.  */
                rd->range -= bound;
                rd->code -= bound;
                return 1;
        }
}

/* Decode and return the next bit from the range decoder.  This wraps around
 * lzms_range_decoder_raw_decode_bit() to handle using and updating the
 * appropriate probability table.  */
static int
lzms_range_decode_bit(struct lzms_range_decoder *dec)
{
        struct lzms_probability_entry *prob_entry;
        u32 prob;
        int bit;

        /* Load the probability entry corresponding to the current state.  */
        prob_entry = &dec->prob_entries[dec->state];

        /* Treat the number of zero bits in the most recently decoded
         * LZMS_PROBABILITY_MAX bits with this probability entry as the chance,
         * out of LZMS_PROBABILITY_MAX, that the next bit will be a 0.  However,
         * don't allow 0% or 100% probabilities.  */
        prob = prob_entry->num_recent_zero_bits;
        if (prob == LZMS_PROBABILITY_MAX)
                prob = LZMS_PROBABILITY_MAX - 1;
        else if (prob == 0)
                prob = 1;

        /* Decode the next bit.  */
        bit = lzms_range_decoder_raw_decode_bit(dec->rd, prob);

        /* Update the state based on the newly decoded bit.  */
        dec->state = (((dec->state << 1) | bit) & dec->mask);

        /* Update the recent bits, including the cached count of 0's.  */
        BUILD_BUG_ON(LZMS_PROBABILITY_MAX > sizeof(prob_entry->recent_bits) * 8);
        if (bit == 0) {
                if (prob_entry->recent_bits & (1ULL << (LZMS_PROBABILITY_MAX - 1))) {
                        /* Replacing 1 bit with 0 bit; increment the zero count.
                         */
                        prob_entry->num_recent_zero_bits++;
                }
        } else {
                if (!(prob_entry->recent_bits & (1ULL << (LZMS_PROBABILITY_MAX - 1)))) {
                        /* Replacing 0 bit with 1 bit; decrement the zero count.
                         */
                        prob_entry->num_recent_zero_bits--;
                }
        }
        prob_entry->recent_bits = (prob_entry->recent_bits << 1) | bit;

        /* Return the decoded bit.  */
        return bit;
}


/* Build the decoding table for a new adaptive Huffman code using the alphabet
 * used in the specified Huffman decoder, with the symbol frequencies
 * dec->sym_freqs.  */
static void
lzms_rebuild_adaptive_huffman_code(struct lzms_huffman_decoder *dec)
{
        int ret;

        /* XXX:  This implementation makes use of code already implemented for
         * the XPRESS and LZX compression formats.  However, since for the
         * adaptive codes used in LZMS we don't actually need the explicit codes
         * themselves, only the decode tables, it may be possible to optimize
         * this by somehow directly building or updating the Huffman decode
         * table.  This may be a worthwhile optimization because the adaptive
         * codes change many times throughout a decompression run.  */
        LZMS_DEBUG("Rebuilding adaptive Huffman code (num_syms=%u)",
                   dec->num_syms);
        make_canonical_huffman_code(dec->num_syms, LZMS_MAX_CODEWORD_LEN,
                                    dec->sym_freqs, dec->lens, dec->codewords);
        ret = make_huffman_decode_table(dec->decode_table, dec->num_syms,
                                        LZMS_DECODE_TABLE_BITS, dec->lens,
                                        LZMS_MAX_CODEWORD_LEN);
        LZMS_ASSERT(ret == 0);
}

/* Decode and return the next Huffman-encoded symbol from the LZMS-compressed
 * block using the specified Huffman decoder.  */
static u32
lzms_decode_huffman_symbol(struct lzms_huffman_decoder *dec)
{
        const u8 *lens = dec->lens;
        const u16 *decode_table = dec->decode_table;
        struct lzms_input_bitstream *is = dec->is;

        /* The Huffman codes used in LZMS are adaptive and must be rebuilt
         * whenever a certain number of symbols have been read.  Each such
         * rebuild uses the current symbol frequencies, but the format also
         * requires that the symbol frequencies be halved after each code
         * rebuild.  This diminishes the effect of old symbols on the current
         * Huffman codes, thereby causing the Huffman codes to be more locally
         * adaptable.  */
        if (dec->num_syms_read == dec->rebuild_freq) {
                lzms_rebuild_adaptive_huffman_code(dec);
                for (unsigned i = 0; i < dec->num_syms; i++) {
                        dec->sym_freqs[i] >>= 1;
                        dec->sym_freqs[i] += 1;
                }
                dec->num_syms_read = 0;
        }

        /* In the following Huffman decoding implementation, the first
         * LZMS_DECODE_TABLE_BITS of the input are used as an offset into a
         * decode table.  The entry will either provide the decoded symbol
         * directly, or else a "real" Huffman binary tree will be searched to
         * decode the symbol.  */

        lzms_input_bitstream_ensure_bits(is, LZMS_MAX_CODEWORD_LEN);

        u16 key_bits = lzms_input_bitstream_peek_bits(is, LZMS_DECODE_TABLE_BITS);
        u16 sym = decode_table[key_bits];

        if (sym < dec->num_syms) {
                /* Fast case: The decode table directly provided the symbol.  */
                lzms_input_bitstream_remove_bits(is, lens[sym]);
        } else {
                /* Slow case: The symbol took too many bits to include directly
                 * in the decode table, so search for it in a binary tree at the
                 * end of the decode table.  */
                lzms_input_bitstream_remove_bits(is, LZMS_DECODE_TABLE_BITS);
                do {
                        key_bits = sym + lzms_input_bitstream_pop_bits(is, 1);
                } while ((sym = decode_table[key_bits]) >= dec->num_syms);
        }

        /* Tally and return the decoded symbol.  */
        ++dec->sym_freqs[sym];
        ++dec->num_syms_read;
        return sym;
}

/* Decode a number from the LZMS bitstream, encoded as a Huffman-encoded symbol
 * specifying a "slot" (whose corresponding value is looked up in a static
 * table) plus the number specified by a number of extra bits depending on the
 * slot.  */
static u32
lzms_decode_value(struct lzms_huffman_decoder *dec)
{
        unsigned slot;
        unsigned num_extra_bits;
        u32 extra_bits;

        /* Read the slot (position slot, length slot, etc.), which is encoded as
         * a Huffman symbol.  */
        slot = lzms_decode_huffman_symbol(dec);

        LZMS_ASSERT(dec->slot_base_tab != NULL);

        /* Get the number of extra bits needed to represent the range of values
         * that share the slot.  */
        num_extra_bits = bsr32(dec->slot_base_tab[slot + 1] -
                               dec->slot_base_tab[slot]);

        /* Read the number of extra bits and add them to the slot to form the
         * final decoded value.  */
        extra_bits = lzms_input_bitstream_read_bits(dec->is, num_extra_bits);
        return dec->slot_base_tab[slot] + extra_bits;
}

/* Copy a literal to the output buffer.  */
static int
lzms_copy_literal(struct lzms_decompressor *ctx, u8 literal)
{
        *ctx->out_next++ = literal;
        return 0;
}

/* Validate an LZ match and copy it to the output buffer.  */
static int
lzms_copy_lz_match(struct lzms_decompressor *ctx, u32 length, u32 offset)
{
        u8 *out_next;
        u8 *matchptr;

        if (length > ctx->out_end - ctx->out_next) {
                LZMS_DEBUG("Match overrun!");
                return -1;
        }
        if (offset > ctx->out_next - ctx->out_begin) {
                LZMS_DEBUG("Match underrun!");
                return -1;
        }

        out_next = ctx->out_next;
        matchptr = out_next - offset;
        while (length--)
                *out_next++ = *matchptr++;

        ctx->out_next = out_next;
        return 0;
}

/* Validate a delta match and copy it to the output buffer.  */
static int
lzms_copy_delta_match(struct lzms_decompressor *ctx, u32 length,
                      u32 power, u32 raw_offset)
{
        u32 offset1 = 1U << power;
        u32 offset2 = raw_offset << power;
        u32 offset = offset1 + offset2;
        u8 *out_next;
        u8 *matchptr1;
        u8 *matchptr2;
        u8 *matchptr;

        if (length > ctx->out_end - ctx->out_next) {
                LZMS_DEBUG("Match overrun!");
                return -1;
        }
        if (offset > ctx->out_next - ctx->out_begin) {
                LZMS_DEBUG("Match underrun!");
                return -1;
        }

        out_next = ctx->out_next;
        matchptr1 = out_next - offset1;
        matchptr2 = out_next - offset2;
        matchptr = out_next - offset;

        while (length--)
                *out_next++ = *matchptr1++ + *matchptr2++ - *matchptr++;

        ctx->out_next = out_next;
        return 0;
}

/* Decode a (length, offset) pair from the input.  */
static int
lzms_decode_lz_match(struct lzms_decompressor *ctx)
{
        int bit;
        u32 length, offset;

        /* Decode the match offset.  The next range-encoded bit indicates
         * whether it's a repeat offset or an explicit offset.  */

        bit = lzms_range_decode_bit(&ctx->lz_match_range_decoder);
        if (bit == 0) {
                /* Explicit offset.  */
                offset = lzms_decode_value(&ctx->lz_offset_decoder);
        } else {
                /* Repeat offset.  */
                int i;

                for (i = 0; i < LZMS_NUM_RECENT_OFFSETS - 1; i++)
                        if (!lzms_range_decode_bit(&ctx->lz_repeat_match_range_decoders[i]))
                                break;

                offset = ctx->recent_lz_offsets[i];

                for (; i < LZMS_NUM_RECENT_OFFSETS; i++)
                        ctx->recent_lz_offsets[i] = ctx->recent_lz_offsets[i + 1];
        }

        /* Decode match length, which is always given explicitly (there is no
         * LRU queue for repeat lengths).  */
        length = lzms_decode_value(&ctx->length_decoder);

        ctx->upcoming_lz_offset = offset;

        LZMS_DEBUG("Decoded %s LZ match: length=%u, offset=%u",
                   (bit ? "repeat" : "explicit"), length, offset);

        /* Validate the match and copy it to the output.  */
        return lzms_copy_lz_match(ctx, length, offset);
}

/* Decodes a "delta" match from the input.  */
static int
lzms_decode_delta_match(struct lzms_decompressor *ctx)
{
        int bit;
        u32 length, power, raw_offset;

        /* Decode the match power and raw offset.  The next range-encoded bit
         * indicates whether these data are a repeat, or given explicitly.  */

        bit = lzms_range_decode_bit(&ctx->delta_match_range_decoder);
        if (bit == 0) {
                power = lzms_decode_huffman_symbol(&ctx->delta_power_decoder);
                raw_offset = lzms_decode_value(&ctx->delta_offset_decoder);
        } else {
                int i;

                for (i = 0; i < LZMS_NUM_RECENT_OFFSETS - 1; i++)
                        if (!lzms_range_decode_bit(&ctx->delta_repeat_match_range_decoders[i]))
                                break;

                power = ctx->recent_delta_powers[i];
                raw_offset = ctx->recent_delta_offsets[i];

                for (; i < LZMS_NUM_RECENT_OFFSETS; i++) {
                        ctx->recent_delta_powers[i] = ctx->recent_delta_powers[i + 1];
                        ctx->recent_delta_offsets[i] = ctx->recent_delta_offsets[i + 1];
                }
        }

        length = lzms_decode_value(&ctx->length_decoder);

        ctx->upcoming_delta_power = power;
        ctx->upcoming_delta_offset = raw_offset;

        LZMS_DEBUG("Decoded %s delta match: length=%u, power=%u, raw_offset=%u",
                   (bit ? "repeat" : "explicit"), length, power, raw_offset);

        /* Validate the match and copy it to the output.  */
        return lzms_copy_delta_match(ctx, length, power, raw_offset);
}

static int
lzms_decode_match(struct lzms_decompressor *ctx)
{
        if (!lzms_range_decode_bit(&ctx->match_range_decoder))
                return lzms_decode_lz_match(ctx);
        else
                return lzms_decode_delta_match(ctx);
}

/* Decode a literal byte encoded using the literal Huffman code.  */
static int
lzms_decode_literal(struct lzms_decompressor *ctx)
{
        u8 literal = lzms_decode_huffman_symbol(&ctx->literal_decoder);
        LZMS_DEBUG("Decoded literal: 0x%02x", literal);
        return lzms_copy_literal(ctx, literal);
}

/* Decode the next LZMS match or literal.  */
static int
lzms_decode_item(struct lzms_decompressor *ctx)
{
        int ret;

        ctx->upcoming_delta_offset = 0;
        ctx->upcoming_lz_offset = 0;
        ctx->upcoming_delta_power = 0;

        if (lzms_range_decode_bit(&ctx->main_range_decoder))
                ret = lzms_decode_match(ctx);
        else
                ret = lzms_decode_literal(ctx);

        if (ret)
                return ret;

        /* Update LRU queues  */
        if (ctx->prev_lz_offset != 0) {
                for (int i = LZMS_NUM_RECENT_OFFSETS - 1; i >= 0; i--)
                        ctx->recent_lz_offsets[i + 1] = ctx->recent_lz_offsets[i];
                ctx->recent_lz_offsets[0] = ctx->prev_lz_offset;
        }

        if (ctx->prev_delta_offset != 0) {
                for (int i = LZMS_NUM_RECENT_OFFSETS - 1; i >= 0; i--) {
                        ctx->recent_delta_powers[i + 1] = ctx->recent_delta_powers[i];
                        ctx->recent_delta_offsets[i + 1] = ctx->recent_delta_offsets[i];
                }
                ctx->recent_delta_powers[0] = ctx->prev_delta_power;
                ctx->recent_delta_offsets[0] = ctx->prev_delta_offset;
        }

        ctx->prev_lz_offset = ctx->upcoming_lz_offset;
        ctx->prev_delta_offset = ctx->upcoming_delta_offset;
        ctx->prev_delta_power = ctx->upcoming_delta_power;
        return 0;
}

static void
lzms_init_range_decoder(struct lzms_range_decoder *dec,
                        struct lzms_range_decoder_raw *rd, u32 num_states)
{
        dec->rd = rd;
        dec->state = 0;
        dec->mask = num_states - 1;
        for (u32 i = 0; i < num_states; i++) {
                dec->prob_entries[i].num_recent_zero_bits = LZMS_INITIAL_PROBABILITY;
                dec->prob_entries[i].recent_bits = LZMS_INITIAL_RECENT_BITS;
        }
}

static void
lzms_init_huffman_decoder(struct lzms_huffman_decoder *dec,
                          struct lzms_input_bitstream *is,
                          const u32 *slot_base_tab, unsigned num_syms,
                          unsigned rebuild_freq)
{
        dec->is = is;
        dec->slot_base_tab = slot_base_tab;
        dec->num_syms = num_syms;
        dec->num_syms_read = rebuild_freq;
        dec->rebuild_freq = rebuild_freq;
        for (unsigned i = 0; i < num_syms; i++)
                dec->sym_freqs[i] = 1;
}

/* Prepare to decode items from an LZMS-compressed block.  */
static void
lzms_init_decompressor(struct lzms_decompressor *ctx,
                       const void *cdata, unsigned clen,
                       void *ubuf, unsigned ulen)
{
        unsigned num_position_slots;

        LZMS_DEBUG("Initializing decompressor (clen=%u, ulen=%u)", clen, ulen);

        /* Initialize output pointers.  */
        ctx->out_begin = ubuf;
        ctx->out_next = ubuf;
        ctx->out_end = (u8*)ubuf + ulen;

        /* Initialize the raw range decoder (reading forwards).  */
        lzms_range_decoder_raw_init(&ctx->rd, cdata, clen / 2);

        /* Initialize the input bitstream for Huffman symbols (reading
         * backwards)  */
        lzms_input_bitstream_init(&ctx->is, cdata, clen / 2);

        /* Initialize position and length slot bases if not done already.  */
        lzms_init_slot_bases();

        /* Calculate the number of position slots needed for this compressed
         * block.  */
        num_position_slots = lzms_get_position_slot_raw(ulen - 1) + 1;

        LZMS_DEBUG("Using %u position slots", num_position_slots);

        /* Initialize Huffman decoders for each alphabet used in the compressed
         * representation.  */
        lzms_init_huffman_decoder(&ctx->literal_decoder, &ctx->is,
                                  NULL, LZMS_NUM_LITERAL_SYMS,
                                  LZMS_LITERAL_CODE_REBUILD_FREQ);

        lzms_init_huffman_decoder(&ctx->lz_offset_decoder, &ctx->is,
                                  lzms_position_slot_base, num_position_slots,
                                  LZMS_LZ_OFFSET_CODE_REBUILD_FREQ);

        lzms_init_huffman_decoder(&ctx->length_decoder, &ctx->is,
                                  lzms_length_slot_base, LZMS_NUM_LEN_SYMS,
                                  LZMS_LENGTH_CODE_REBUILD_FREQ);

        lzms_init_huffman_decoder(&ctx->delta_offset_decoder, &ctx->is,
                                  lzms_position_slot_base, num_position_slots,
                                  LZMS_DELTA_OFFSET_CODE_REBUILD_FREQ);

        lzms_init_huffman_decoder(&ctx->delta_power_decoder, &ctx->is,
                                  NULL, LZMS_NUM_DELTA_POWER_SYMS,
                                  LZMS_DELTA_POWER_CODE_REBUILD_FREQ);


        /* Initialize range decoders, all of which wrap around the same
         * lzms_range_decoder_raw.  */
        lzms_init_range_decoder(&ctx->main_range_decoder,
                                &ctx->rd, LZMS_NUM_MAIN_STATES);

        lzms_init_range_decoder(&ctx->match_range_decoder,
                                &ctx->rd, LZMS_NUM_MATCH_STATES);

        lzms_init_range_decoder(&ctx->lz_match_range_decoder,
                                &ctx->rd, LZMS_NUM_LZ_MATCH_STATES);

        for (size_t i = 0; i < ARRAY_LEN(ctx->lz_repeat_match_range_decoders); i++)
                lzms_init_range_decoder(&ctx->lz_repeat_match_range_decoders[i],
                                        &ctx->rd, LZMS_NUM_LZ_REPEAT_MATCH_STATES);

        lzms_init_range_decoder(&ctx->delta_match_range_decoder,
                                &ctx->rd, LZMS_NUM_DELTA_MATCH_STATES);

        for (size_t i = 0; i < ARRAY_LEN(ctx->delta_repeat_match_range_decoders); i++)
                lzms_init_range_decoder(&ctx->delta_repeat_match_range_decoders[i],
                                        &ctx->rd, LZMS_NUM_DELTA_REPEAT_MATCH_STATES);

        /* Initialize the LRU queue for recent match offsets.  */
        for (size_t i = 0; i < LZMS_NUM_RECENT_OFFSETS + 1; i++)
                ctx->recent_lz_offsets[i] = i + 1;

        for (size_t i = 0; i < LZMS_NUM_RECENT_OFFSETS + 1; i++) {
                ctx->recent_delta_powers[i] = 0;
                ctx->recent_delta_offsets[i] = i + 1;
        }
        ctx->prev_lz_offset = 0;
        ctx->prev_delta_offset = 0;
        ctx->prev_delta_power = 0;
        ctx->upcoming_lz_offset = 0;
        ctx->upcoming_delta_offset = 0;
        ctx->upcoming_delta_power = 0;

        LZMS_DEBUG("Decompressor successfully initialized");
}

/* Decode the series of literals and matches from the LZMS-compressed data.
 * Returns 0 on success; nonzero if the compressed data is invalid.  */
static int
lzms_decode_items(const u8 *cdata, size_t clen, u8 *ubuf, size_t ulen)
{
        /* XXX: The context could be allocated on the heap.  */
        struct lzms_decompressor ctx;

        /* Initialize the LZMS decompressor.  */
        lzms_init_decompressor(&ctx, cdata, clen, ubuf, ulen);

        /* Decode the sequence of items.  */
        while (ctx.out_next != ctx.out_end) {
                LZMS_DEBUG("Position %u", ctx.out_next - ctx.out_begin);
                if (lzms_decode_item(&ctx))
                        return -1;
        }
        return 0;
}

static s32
lzms_try_x86_translation(u8 *ubuf, s32 i, s32 num_op_bytes,
                         s32 *closest_target_usage_p, s32 last_target_usages[],
                         s32 max_trans_offset)
{
        u16 pos;

        if (i - *closest_target_usage_p <= max_trans_offset) {
                LZMS_DEBUG("Performed x86 translation at position %d "
                           "(opcode 0x%02x)", i, ubuf[i]);
                le32 *p32 = (le32*)&ubuf[i + num_op_bytes];
                u32 n = le32_to_cpu(*p32);
                *p32 = cpu_to_le32(n - i);
        }

        pos = i + le16_to_cpu(*(const le16*)&ubuf[i + num_op_bytes]);

        i += num_op_bytes + sizeof(le32) - 1;

        if (i - last_target_usages[pos] <= LZMS_X86_MAX_GOOD_TARGET_OFFSET)
                *closest_target_usage_p = i;

        last_target_usages[pos] = i;

        return i + 1;
}

static s32
lzms_process_x86_translation(u8 *ubuf, s32 i, s32 *closest_target_usage_p,
                             s32 last_target_usages[])
{
        /* Switch on first byte of the opcode, assuming it is really an x86
         * instruction.  */
        switch (ubuf[i]) {
        case 0x48:
                if (ubuf[i + 1] == 0x8b) {
                        if (ubuf[i + 2] == 0x5 || ubuf[i + 2] == 0xd) {
                                /* Load relative (x86_64)  */
                                return lzms_try_x86_translation(ubuf, i, 3,
                                                                closest_target_usage_p,
                                                                last_target_usages,
                                                                LZMS_X86_MAX_TRANSLATION_OFFSET);
                        }
                } else if (ubuf[i + 1] == 0x8d) {
                        if ((ubuf[i + 2] & 0x7) == 0x5) {
                                /* Load effective address relative (x86_64)  */
                                return lzms_try_x86_translation(ubuf, i, 3,
                                                                closest_target_usage_p,
                                                                last_target_usages,
                                                                LZMS_X86_MAX_TRANSLATION_OFFSET);
                        }
                }
                break;

        case 0x4c:
                if (ubuf[i + 1] == 0x8d) {
                        if ((ubuf[i + 2] & 0x7) == 0x5) {
                                /* Load effective address relative (x86_64)  */
                                return lzms_try_x86_translation(ubuf, i, 3,
                                                                closest_target_usage_p,
                                                                last_target_usages,
                                                                LZMS_X86_MAX_TRANSLATION_OFFSET);
                        }
                }
                break;

        case 0xe8:
                /* Call relative  */
                return lzms_try_x86_translation(ubuf, i, 1, closest_target_usage_p,
                                                last_target_usages,
                                                LZMS_X86_MAX_TRANSLATION_OFFSET / 2);

        case 0xe9:
                /* Jump relative  */
                return i + 5;

        case 0xf0:
                if (ubuf[i + 1] == 0x83 && ubuf[i + 2] == 0x05) {
                        /* Lock add relative  */
                        return lzms_try_x86_translation(ubuf, i, 3,
                                                        closest_target_usage_p,
                                                        last_target_usages,
                                                        LZMS_X86_MAX_TRANSLATION_OFFSET);
                }
                break;

        case 0xff:
                if (ubuf[i + 1] == 0x15) {
                        /* Call indirect  */
                        return lzms_try_x86_translation(ubuf, i, 2,
                                                        closest_target_usage_p,
                                                        last_target_usages,
                                                        LZMS_X86_MAX_TRANSLATION_OFFSET);
                }
                break;
        }
        return i + 1;
}

/* Postprocess the uncompressed data by undoing the translation of relative
 * addresses embedded in x86 instructions into absolute addresses.
 *
 * There does not appear to be any way to check to see if this postprocessing
 * actually needs to be done (or to plug in alternate filters, like in LZMA),
 * and the corresponding preprocessing seems to be done unconditionally.  */
static void
lzms_postprocess_data(u8 *ubuf, s32 ulen)
{
        /* Offset (from beginning of buffer) of the most recent reference to a
         * seemingly valid target address.  */
        s32 closest_target_usage = -LZMS_X86_MAX_TRANSLATION_OFFSET - 1;

        /* Offset (from beginning of buffer) of the most recently used target
         * address beginning with two bytes equal to the array index.
         *
         * XXX: This array could be allocated on the heap.  */
        s32 last_target_usages[65536];
        for (s32 i = 0; i < 65536; i++)
                last_target_usages[i] = -LZMS_X86_MAX_GOOD_TARGET_OFFSET - 1;

        /* Check each byte in the buffer for an x86 opcode for which a
         * translation may be possible.  No translations are done on any
         * instructions starting in the last 11 bytes of the buffer.  */
        for (s32 i = 0; i < ulen - 11; )
                i = lzms_process_x86_translation(ubuf, i, &closest_target_usage,
                                                 last_target_usages);
}

/* API function documented in wimlib.h  */
WIMLIBAPI int
wimlib_lzms_decompress(const void *cdata, unsigned clen,
                       void *ubuf, unsigned ulen)
{
        /* The range decoder requires that a minimum of 4 bytes of compressed
         * data be initially available.  */
        if (clen < 4) {
                LZMS_DEBUG("Compressed length too small (got %u, expected >= 4)",
                           clen);
                return -1;
        }

        /* A LZMS-compressed data block should be evenly divisible into 16-bit
         * integers.  */
        if (clen % 2 != 0) {
                LZMS_DEBUG("Compressed length not divisible by 2 (got %u)", clen);
                return -1;
        }

        /* Handle the trivial case where nothing needs to be decompressed.
         * (Necessary because a window of size 0 does not have a valid position
         * slot.)  */
        if (ulen == 0)
                return 0;

        /* The x86 post-processor requires that the uncompressed length fit into
         * a signed 32-bit integer.  Also, the position slot table cannot be
         * searched for a position of INT32_MAX or greater.  */
        if (ulen >= INT32_MAX) {
                LZMS_DEBUG("Uncompressed length too large "
                           "(got %u, expected < INT32_MAX)", ulen);
                return -1;
        }

        /* Decode the literals and matches.  */
        if (lzms_decode_items(cdata, clen, ubuf, ulen))
                return -1;

        /* Postprocess the data.  */
        lzms_postprocess_data(ubuf, ulen);

        LZMS_DEBUG("Decompression successful.");
        return 0;
}