[wimlib] / src / decompress_common.c

/*
 * decompress_common.c
 *
 * Code for decompression shared among multiple compression formats.
 */

/*
 * Copyright (C) 2012, 2013, 2014 Eric Biggers
 *
 * This file is part of wimlib, a library for working with WIM files.
 *
 * wimlib is free software; you can redistribute it and/or modify it under the
 * terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 3 of the License, or (at your option)
 * any later version.
 *
 * wimlib is distributed in the hope that it will be useful, but WITHOUT ANY
 * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
 * A PARTICULAR PURPOSE. See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License
 * along with wimlib; if not, see http://www.gnu.org/licenses/.
 */

#ifdef HAVE_CONFIG_H
#  include "config.h"
#endif

#include "wimlib/decompress_common.h"
#include "wimlib/error.h"
#include "wimlib/util.h" /* for BUILD_BUG_ON()  */

#include <string.h>

#ifdef __GNUC__
#  ifdef __SSE2__
#    define USE_SSE2_FILL
#    include <emmintrin.h>
#  else
#    define USE_LONG_FILL
#  endif
#endif

/* Construct a direct mapping entry in the lookup table.  */
#define MAKE_DIRECT_ENTRY(symbol, length) ((symbol) | ((length) << 11))

/*
 * make_huffman_decode_table() -
 *
 * Build a decoding table for a canonical prefix code, or "Huffman code".
 *
 * This takes as input the length of the codeword for each symbol in the
 * alphabet and produces as output a table that can be used for fast
 * decoding of prefix-encoded symbols using read_huffsym().
 *
 * Strictly speaking, a canonical prefix code might not be a Huffman
 * code.  But this algorithm will work either way; and in fact, since
 * Huffman codes are defined in terms of symbol frequencies, there is no
 * way for the decompressor to know whether the code is a true Huffman
 * code or not until all symbols have been decoded.
 *
 * Because the prefix code is assumed to be "canonical", it can be
 * reconstructed directly from the codeword lengths.  A prefix code is
 * canonical if and only if a longer codeword never lexicographically
 * precedes a shorter codeword, and the lexicographic ordering of
 * codewords of the same length is the same as the lexicographic ordering
 * of the corresponding symbols.  Consequently, we can sort the symbols
 * primarily by codeword length and secondarily by symbol value, then
 * reconstruct the prefix code by generating codewords lexicographically
 * in that order.
 *
 * This function does not, however, generate the prefix code explicitly.
 * Instead, it directly builds a table for decoding symbols using the
 * code.  The basic idea is this: given the next 'max_codeword_len' bits
 * in the input, we can look up the decoded symbol by indexing a table
 * containing 2**max_codeword_len entries.  A codeword with length
 * 'max_codeword_len' will have exactly one entry in this table, whereas
 * a codeword shorter than 'max_codeword_len' will have multiple entries
 * in this table.  Precisely, a codeword of length n will be represented
 * by 2**(max_codeword_len - n) entries in this table.  The 0-based index
 * of each such entry will contain the corresponding codeword as a prefix
 * when zero-padded on the left to 'max_codeword_len' binary digits.
 *
 * That's the basic idea, but we implement two optimizations regarding
 * the format of the decode table itself:
 *
 * - For many compression formats, the maximum codeword length is too
 *   long for it to be efficient to build the full decoding table
 *   whenever a new prefix code is used.  Instead, we can build the table
 *   using only 2**table_bits entries, where 'table_bits' is some number
 *   less than or equal to 'max_codeword_len'.  Then, only codewords of
 *   length 'table_bits' and shorter can be directly looked up.  For
 *   longer codewords, the direct lookup instead produces the root of a
 *   binary tree.  Using this tree, the decoder can do traditional
 *   bit-by-bit decoding of the remainder of the codeword.  Child nodes
 *   are allocated in extra entries at the end of the table; leaf nodes
 *   contain symbols.  Note that the long-codeword case is, in general,
 *   not performance critical, since in Huffman codes the most frequently
 *   used symbols are assigned the shortest codeword lengths.
 *
 * - When we decode a symbol using a direct lookup of the table, we still
 *   need to know its length so that the bitstream can be advanced by the
 *   appropriate number of bits.  The simple solution is to simply retain
 *   the 'lens' array and use the decoded symbol as an index into it.
 *   However, this requires two separate array accesses in the fast path.
 *   The optimization is to store the length directly in the decode
 *   table.  We use the bottom 11 bits for the symbol and the top 5 bits
 *   for the length.  In addition, to combine this optimization with the
 *   previous one, we introduce a special case where the top 2 bits of
 *   the length are both set if the entry is actually the root of a
 *   binary tree.
 *
 * @decode_table:
 *      The array in which to create the decoding table.
 *      This must be 16-byte aligned and must have a length of at least
 *      ((2**table_bits) + 2 * num_syms) entries.
 *
 * @num_syms:
 *      The number of symbols in the alphabet; also, the length of the
 *      'lens' array.  Must be less than or equal to
 *      DECODE_TABLE_MAX_SYMBOLS.
 *
 * @table_bits:
 *      The order of the decode table size, as explained above.  Must be
 *      less than or equal to DECODE_TABLE_MAX_TABLE_BITS.
 *
 * @lens:
 *      An array of length @num_syms, indexable by symbol, that gives the
 *      length of the codeword, in bits, for that symbol.  The length can
 *      be 0, which means that the symbol does not have a codeword
 *      assigned.
 *
 * @max_codeword_len:
 *      The longest codeword length allowed in the compression format.
 *      All entries in 'lens' must be less than or equal to this value.
 *      This must be less than or equal to DECODE_TABLE_MAX_CODEWORD_LEN.
 *
 * Returns 0 on success, or -1 if the lengths do not form a valid prefix
 * code.
 */
int
make_huffman_decode_table(u16 decode_table[const restrict],
                          const unsigned num_syms,
                          const unsigned table_bits,
                          const u8 lens[const restrict],
                          const unsigned max_codeword_len)
{
        const unsigned table_num_entries = 1 << table_bits;
        unsigned len_counts[max_codeword_len + 1];
        u16 sorted_syms[num_syms];
        int left;
        void *decode_table_ptr;
        unsigned sym_idx;
        unsigned codeword_len;
        unsigned stores_per_loop;
        unsigned decode_table_pos;

#ifdef USE_LONG_FILL
        const unsigned entries_per_long = sizeof(unsigned long) / sizeof(decode_table[0]);
#endif

#ifdef USE_SSE2_FILL
        const unsigned entries_per_xmm = sizeof(__m128i) / sizeof(decode_table[0]);
#endif

        /* Check parameters if assertions are enabled.  */
        wimlib_assert2((uintptr_t)decode_table % DECODE_TABLE_ALIGNMENT == 0);
        wimlib_assert2(num_syms <= DECODE_TABLE_MAX_SYMBOLS);
        wimlib_assert2(table_bits <= DECODE_TABLE_MAX_TABLE_BITS);
        wimlib_assert2(max_codeword_len <= DECODE_TABLE_MAX_CODEWORD_LEN);
        for (unsigned sym = 0; sym < num_syms; sym++)
                wimlib_assert2(lens[sym] <= max_codeword_len);

        /* Count how many symbols have each possible codeword length.
         * Note that a length of 0 indicates the corresponding symbol is not
         * used in the code and therefore does not have a codeword.  */
        for (unsigned len = 0; len <= max_codeword_len; len++)
                len_counts[len] = 0;
        for (unsigned sym = 0; sym < num_syms; sym++)
                len_counts[lens[sym]]++;

        /* We can assume all lengths are <= max_codeword_len, but we
         * cannot assume they form a valid prefix code.  A codeword of
         * length n should require a proportion of the codespace equaling
         * (1/2)^n.  The code is valid if and only if the codespace is
         * exactly filled by the lengths, by this measure.  */
        left = 1;
        for (unsigned len = 1; len <= max_codeword_len; len++) {
                left <<= 1;
                left -= len_counts[len];
                if (unlikely(left < 0)) {
                        /* The lengths overflow the codespace; that is, the code
                         * is over-subscribed.  */
                        DEBUG("Invalid prefix code (over-subscribed)");
                        return -1;
                }
        }

        if (unlikely(left != 0)) {
                /* The lengths do not fill the codespace; that is, they form an
                 * incomplete set.  */
                if (left == (1 << max_codeword_len)) {
                        /* The code is completely empty.  This is arguably
                         * invalid, but in fact it is valid in LZX and XPRESS,
                         * so we must allow it.  By definition, no symbols can
                         * be decoded with an empty code.  Consequently, we
                         * technically don't even need to fill in the decode
                         * table.  However, to avoid accessing uninitialized
                         * memory if the algorithm nevertheless attempts to
                         * decode symbols using such a code, we zero out the
                         * decode table.  */
                        memset(decode_table, 0,
                               table_num_entries * sizeof(decode_table[0]));
                        return 0;
                }
                DEBUG("Invalid prefix code (incomplete set)");
                return -1;
        }

        /* Sort the symbols primarily by length and secondarily by symbol order.
         */
        {
                unsigned offsets[max_codeword_len + 1];

                /* Initialize 'offsets' so that offsets[len] for 1 <= len <=
                 * max_codeword_len is the number of codewords shorter than
                 * 'len' bits.  */
                offsets[1] = 0;
                for (unsigned len = 1; len < max_codeword_len; len++)
                        offsets[len + 1] = offsets[len] + len_counts[len];

                /* Use the 'offsets' array to sort the symbols.
                 * Note that we do not include symbols that are not used in the
                 * code.  Consequently, fewer than 'num_syms' entries in
                 * 'sorted_syms' may be filled.  */
                for (unsigned sym = 0; sym < num_syms; sym++)
                        if (lens[sym] != 0)
                                sorted_syms[offsets[lens[sym]]++] = sym;
        }

        /* Fill entries for codewords with length <= table_bits
         * --- that is, those short enough for a direct mapping.
         *
         * The table will start with entries for the shortest codeword(s), which
         * have the most entries.  From there, the number of entries per
         * codeword will decrease.  As an optimization, we may begin filling
         * entries with SSE2 vector accesses (8 entries/store), then change to
         * 'unsigned long' accesses (2 or 4 entries/store), then change to
         * 16-bit accesses (1 entry/store).  */
        decode_table_ptr = decode_table;
        sym_idx = 0;
        codeword_len = 1;
#ifdef USE_SSE2_FILL
        /* Fill the entries one 128-bit vector at a time.
         * This is 8 entries per store.  */
        stores_per_loop = (1 << (table_bits - codeword_len)) / entries_per_xmm;
        for (; stores_per_loop != 0; codeword_len++, stores_per_loop >>= 1) {
                unsigned end_sym_idx = sym_idx + len_counts[codeword_len];
                for (; sym_idx < end_sym_idx; sym_idx++) {
                        /* Note: unlike in the 'long' version below, the __m128i
                         * type already has __attribute__((may_alias)), so using
                         * it to access the decode table, which is an array of
                         * unsigned shorts, will not violate strict aliasing.
                         */
                        u16 entry;
                        __m128i v;
                        __m128i *p;
                        unsigned n;

                        entry = MAKE_DIRECT_ENTRY(sorted_syms[sym_idx], codeword_len);

                        v = _mm_set1_epi16(entry);
                        p = (__m128i*)decode_table_ptr;
                        n = stores_per_loop;
                        do {
                                *p++ = v;
                        } while (--n);
                        decode_table_ptr = p;
                }
        }
#endif /* USE_SSE2_FILL */

#ifdef USE_LONG_FILL
        /* Fill the entries one 'unsigned long' at a time.
         * On 32-bit systems this is 2 entries per store, while on 64-bit
         * systems this is 4 entries per store.  */
        stores_per_loop = (1 << (table_bits - codeword_len)) / entries_per_long;
        for (; stores_per_loop != 0; codeword_len++, stores_per_loop >>= 1) {
                unsigned end_sym_idx = sym_idx + len_counts[codeword_len];
                for (; sym_idx < end_sym_idx; sym_idx++) {

                        /* Accessing the array of unsigned shorts as unsigned
                         * longs would violate strict aliasing and would require
                         * compiling the code with -fno-strict-aliasing to
                         * guarantee correctness.  To work around this problem,
                         * use the gcc 'may_alias' extension to define a special
                         * unsigned long type that may alias any other in-memory
                         * variable.  */
                        typedef unsigned long __attribute__((may_alias)) aliased_long_t;

                        unsigned long v;
                        aliased_long_t *p;
                        unsigned n;

                        BUILD_BUG_ON(sizeof(unsigned long) != 4 &&
                                     sizeof(unsigned long) != 8);

                        v = MAKE_DIRECT_ENTRY(sorted_syms[sym_idx], codeword_len);
                        v |= v << 16;
                        if (sizeof(unsigned long) == 8) {
                                /* This may produce a compiler warning if an
                                 * 'unsigned long' is 32 bits, but this won't be
                                 * executed unless an 'unsigned long' is at
                                 * least 64 bits anyway.  */
                                v |= v << 32;
                        }

                        p = (aliased_long_t *)decode_table_ptr;
                        n = stores_per_loop;

                        do {
                                *p++ = v;
                        } while (--n);
                        decode_table_ptr = p;
                }
        }
#endif /* USE_LONG_FILL */

        /* Fill the entries one 16-bit integer at a time.  */
        stores_per_loop = (1 << (table_bits - codeword_len));
        for (; stores_per_loop != 0; codeword_len++, stores_per_loop >>= 1) {
                unsigned end_sym_idx = sym_idx + len_counts[codeword_len];
                for (; sym_idx < end_sym_idx; sym_idx++) {
                        u16 entry;
                        u16 *p;
                        unsigned n;

                        entry = MAKE_DIRECT_ENTRY(sorted_syms[sym_idx], codeword_len);

                        p = (u16*)decode_table_ptr;
                        n = stores_per_loop;

                        do {
                                *p++ = entry;
                        } while (--n);

                        decode_table_ptr = p;
                }
        }

        /* If we've filled in the entire table, we are done.  Otherwise,
         * there are codewords longer than table_bits for which we must
         * generate binary trees.  */

        decode_table_pos = (u16*)decode_table_ptr - decode_table;
        if (decode_table_pos != table_num_entries) {
                unsigned j;
                unsigned next_free_tree_slot;
                unsigned cur_codeword;

                /* First, zero out the remaining entries.  This is
                 * necessary so that these entries appear as
                 * "unallocated" in the next part.  Each of these entries
                 * will eventually be filled with the representation of
                 * the root node of a binary tree.  */
                j = decode_table_pos;
                do {
                        decode_table[j] = 0;
                } while (++j != table_num_entries);

                /* We allocate child nodes starting at the end of the
                 * direct lookup table.  Note that there should be
                 * 2*num_syms extra entries for this purpose, although
                 * fewer than this may actually be needed.  */
                next_free_tree_slot = table_num_entries;

                /* Iterate through each codeword with length greater than
                 * 'table_bits', primarily in order of codeword length
                 * and secondarily in order of symbol.  */
                for (cur_codeword = decode_table_pos << 1;
                     codeword_len <= max_codeword_len;
                     codeword_len++, cur_codeword <<= 1)
                {
                        unsigned end_sym_idx = sym_idx + len_counts[codeword_len];
                        for (; sym_idx < end_sym_idx; sym_idx++, cur_codeword++)
                        {
                                /* 'sym' is the symbol represented by the
                                 * codeword.  */
                                unsigned sym = sorted_syms[sym_idx];

                                unsigned extra_bits = codeword_len - table_bits;

                                unsigned node_idx = cur_codeword >> extra_bits;

                                /* Go through each bit of the current codeword
                                 * beyond the prefix of length @table_bits and
                                 * walk the appropriate binary tree, allocating
                                 * any slots that have not yet been allocated.
                                 *
                                 * Note that the 'pointer' entry to the binary
                                 * tree, which is stored in the direct lookup
                                 * portion of the table, is represented
                                 * identically to other internal (non-leaf)
                                 * nodes of the binary tree; it can be thought
                                 * of as simply the root of the tree.  The
                                 * representation of these internal nodes is
                                 * simply the index of the left child combined
                                 * with the special bits 0xC000 to distingush
                                 * the entry from direct mapping and leaf node
                                 * entries.  */
                                do {

                                        /* At least one bit remains in the
                                         * codeword, but the current node is an
                                         * unallocated leaf.  Change it to an
                                         * internal node.  */
                                        if (decode_table[node_idx] == 0) {
                                                decode_table[node_idx] =
                                                        next_free_tree_slot | 0xC000;
                                                decode_table[next_free_tree_slot++] = 0;
                                                decode_table[next_free_tree_slot++] = 0;
                                        }

                                        /* Go to the left child if the next bit
                                         * in the codeword is 0; otherwise go to
                                         * the right child.  */
                                        node_idx = decode_table[node_idx] & 0x3FFF;
                                        --extra_bits;
                                        node_idx += (cur_codeword >> extra_bits) & 1;
                                } while (extra_bits != 0);

                                /* We've traversed the tree using the entire
                                 * codeword, and we're now at the entry where
                                 * the actual symbol will be stored.  This is
                                 * distinguished from internal nodes by not
                                 * having its high two bits set.  */
                                decode_table[node_idx] = sym;
                        }
                }
        }
        return 0;
}