]> wimlib.net Git - wimlib/blob - include/wimlib/inode.h
Reparse point updates
[wimlib] / include / wimlib / inode.h
1 #ifndef _WIMLIB_INODE_H
2 #define _WIMLIB_INODE_H
3
4 #include "wimlib/assert.h"
5 #include "wimlib/list.h"
6 #include "wimlib/sha1.h"
7 #include "wimlib/types.h"
8
9 struct avl_tree_node;
10 struct blob_descriptor;
11 struct blob_table;
12 struct wim_dentry;
13 struct wim_security_data;
14 struct wimfs_fd;
15
16 /* Valid values for the 'stream_type' field of a 'struct wim_inode_stream'  */
17 enum wim_inode_stream_type {
18
19         /* Data stream, may be unnamed (usual case) or named  */
20         STREAM_TYPE_DATA,
21
22         /* Reparse point stream.  This is the same as the data of the on-disk
23          * reparse point attribute, except that the first 8 bytes of the on-disk
24          * attribute are omitted.  The omitted bytes contain the reparse tag
25          * (which is instead stored in the on-disk WIM dentry), the reparse data
26          * size (which is redundant with the stream size), and a reserved field
27          * that is always zero.  */
28         STREAM_TYPE_REPARSE_POINT,
29
30         /* Encrypted data in the "EFSRPC raw data format" specified by [MS-EFSR]
31          * section 2.2.3.  This contains metadata for the Encrypting File System
32          * as well as the encrypted data of all the file's data streams.  */
33         STREAM_TYPE_EFSRPC_RAW_DATA,
34
35         /* Stream type could not be determined  */
36         STREAM_TYPE_UNKNOWN,
37 };
38
39 extern const utf16lechar NO_STREAM_NAME[1];
40
41 /*
42  * 'struct wim_inode_stream' describes a "stream", which associates a blob of
43  * data with an inode.  Each stream has a type and optionally a name.
44  *
45  * The most frequently seen kind of stream is the "unnamed data stream"
46  * (stream_type == STREAM_TYPE_DATA && stream_name == NO_STREAM_NAME), which is
47  * the "default file contents".  Many inodes just have an unnamed data stream
48  * and no other streams.  However, files on NTFS filesystems may have
49  * additional, "named" data streams, and this is supported by the WIM format.
50  *
51  * A "reparse point" is an inode with reparse data set.  The reparse data is
52  * stored in a stream of type STREAM_TYPE_REPARSE_POINT.  There should be only
53  * one such stream, and it should be unnamed.  However, it is possible for an
54  * inode to have both a reparse point stream and an unnamed data stream, and
55  * even named data streams as well.
56  */
57 struct wim_inode_stream {
58
59         /* The name of the stream or NO_STREAM_NAME.  */
60         utf16lechar *stream_name;
61
62         /*
63          * If 'stream_resolved' = 0, then 'stream_hash' is the SHA-1 message
64          * digest of the uncompressed data of this stream, or all zeroes if this
65          * stream is empty.
66          *
67          * If 'stream_resolved' = 1, then 'stream_blob' is a pointer directly to
68          * a descriptor for this stream's blob, or NULL if this stream is empty.
69          */
70         union {
71                 u8 _stream_hash[SHA1_HASH_SIZE];
72                 struct blob_descriptor *_stream_blob;
73         };
74
75         /* 'stream_resolved' determines whether 'stream_hash' or 'stream_blob'
76          * is valid as described above.  */
77         u32 stream_resolved : 1;
78
79         /* A unique identifier for this stream within the context of its inode.
80          * This stays constant even if the streams array is reallocated.  */
81         u32 stream_id : 28;
82
83         /* The type of this stream as one of the STREAM_TYPE_* values  */
84         u32 stream_type : 3;
85 };
86
87 /*
88  * WIM inode - a "file" in an image which may be accessible via multiple paths
89  *
90  * Note: in WIM files there is no true on-disk analogue of an inode; there are
91  * only directory entries, and some fields are duplicated among all links to a
92  * file.  However, wimlib uses inode structures internally to simplify handling
93  * of hard links.
94  */
95 struct wim_inode {
96
97         /*
98          * The collection of streams for this inode.  'i_streams' points to
99          * either 'i_embedded_streams' or an allocated array.
100          */
101         struct wim_inode_stream *i_streams;
102         struct wim_inode_stream i_embedded_streams[1];
103         unsigned i_num_streams;
104
105         /* Windows file attribute flags (FILE_ATTRIBUTE_*).  */
106         u32 i_attributes;
107
108         /* Root of a balanced binary search tree storing the child directory
109          * entries of this inode, if any.  Keyed by wim_dentry->file_name, case
110          * sensitively.  If this inode is not a directory or if it has no
111          * children then this will be an empty tree (NULL).  */
112         struct avl_tree_node *i_children;
113
114         /* Root of a balanced binary search tree storing the child directory
115          * entries of this inode, if any.  Keyed by wim_dentry->file_name, case
116          * insensitively.  If this inode is not a directory or if it has no
117          * children then this will be an empty tree (NULL).  */
118         struct avl_tree_node *i_children_ci;
119
120         /* List of dentries that are aliases for this inode.  There will be
121          * i_nlink dentries in this list.  */
122         struct list_head i_dentry;
123
124         /* Field to place this inode into a list.  While reading a WIM image or
125          * adding files to a WIM image this is owned by the inode table;
126          * otherwise this links the inodes for the WIM image.  */
127         struct hlist_node i_hlist;
128
129         /* Number of dentries that are aliases for this inode.  */
130         u32 i_nlink;
131
132         /* Flag used to mark this inode as visited; this is used when visiting
133          * all the inodes in a dentry tree exactly once.  It will be 0 by
134          * default and must be cleared following the tree traversal, even in
135          * error paths.  */
136         u8 i_visited : 1;
137
138         /* Cached value  */
139         u8 i_can_externally_back : 1;
140
141         /* If not NULL, a pointer to the extra data that was read from the
142          * dentry.  This should be a series of tagged items, each of which
143          * represents a bit of extra metadata, such as the file's object ID.
144          * See tagged_items.c for more information.  */
145         void *i_extra;
146
147         /* Size of @i_extra buffer in bytes.  If 0, there is no extra data.  */
148         size_t i_extra_size;
149
150         /* Creation time, last access time, and last write time for this inode,
151          * in 100-nanosecond intervals since 12:00 a.m UTC January 1, 1601.
152          * They should correspond to the times gotten by calling GetFileTime()
153          * on Windows. */
154         u64 i_creation_time;
155         u64 i_last_access_time;
156         u64 i_last_write_time;
157
158         /* Corresponds to 'security_id' in `struct wim_dentry_on_disk':  The
159          * index of this inode's security descriptor in the WIM image's table of
160          * security descriptors, or -1.  Note: when a WIM image is loaded,
161          * wimlib sets out-of-bounds indices and values less than -1 in this
162          * field to -1.  So the extraction code need not do an upper bound check
163          * after checking for -1 (or equivalently < 0).  */
164         s32 i_security_id;
165
166         /* Unknown field that we only read into memory so we can re-write it
167          * unchanged.  Probably it's actually just padding...  */
168         u32 i_unknown_0x54;
169
170         /* The following fields correspond to 'reparse_tag', 'rp_reserved', and
171          * 'rp_flags' in `struct wim_dentry_on_disk'.  They are only meaningful
172          * for reparse point files.  */
173         u32 i_reparse_tag;
174         u16 i_rp_reserved;
175         u16 i_rp_flags;
176
177         /* Inode number; corresponds to hard_link_group_id in the `struct
178          * wim_dentry_on_disk'.  */
179         u64 i_ino;
180
181         union {
182                 /* Device number, used only during image capture, so we can
183                  * identify hard linked files by the combination of inode number
184                  * and device number (rather than just inode number, which could
185                  * be ambigious if the captured tree spans a mountpoint).  Set
186                  * to 0 otherwise.  */
187                 u64 i_devno;
188
189                 /* Fields used only during extraction  */
190                 struct {
191                         /* List of aliases of this dentry that are being
192                          * extracted in the current extraction operation.  This
193                          * will be a (possibly nonproper) subset of the dentries
194                          * in the i_dentry list.  This list will be constructed
195                          * regardless of whether the extraction backend supports
196                          * hard links or not.  */
197                         struct list_head i_extraction_aliases;
198
199                 #ifdef WITH_NTFS_3G
200                         /* In NTFS-3g extraction mode, this is set to the Master
201                          * File Table (MFT) number of the NTFS file that was
202                          * created for this inode.  */
203                         u64 i_mft_no;
204                 #endif
205                 };
206
207                 /* Used during WIM writing with
208                  * WIMLIB_WRITE_FLAG_SEND_DONE_WITH_FILE_MESSAGES:  the number
209                  * of streams this inode has that have not yet been fully read.
210                  * */
211                 u32 num_remaining_streams;
212
213 #ifdef WITH_FUSE
214                 struct {
215                         /* Used only during image mount:  Table of file
216                          * descriptors that have been opened to this inode.
217                          * This table is freed when the last file descriptor is
218                          * closed.  */
219                         struct wimfs_fd **i_fds;
220
221                         /* Lower bound on the index of the next available entry
222                          * in 'i_fds'.  */
223                         u16 i_next_fd;
224                 };
225 #endif
226         };
227
228 #ifdef WITH_FUSE
229         u16 i_num_opened_fds;
230         u16 i_num_allocated_fds;
231 #endif
232
233         /* Next stream ID to be assigned  */
234         u32 i_next_stream_id;
235 };
236
237 /*
238  * The available reparse tags are documented at
239  * http://msdn.microsoft.com/en-us/library/dd541667(v=prot.10).aspx.
240  * Here we only define the ones of interest to us.
241  */
242 #define WIM_IO_REPARSE_TAG_MOUNT_POINT          0xA0000003
243 #define WIM_IO_REPARSE_TAG_SYMLINK              0xA000000C
244 #define WIM_IO_REPARSE_TAG_WOF                  0x80000017
245
246 /* Flags for the rp_flags field.  Currently the only known flag is NOT_FIXED,
247  * which indicates that the target of the absolute symbolic link or junction was
248  * not changed when it was stored.  */
249 #define WIM_RP_FLAG_NOT_FIXED              0x0001
250
251 /* Windows file attribute flags  */
252 #define FILE_ATTRIBUTE_READONLY            0x00000001
253 #define FILE_ATTRIBUTE_HIDDEN              0x00000002
254 #define FILE_ATTRIBUTE_SYSTEM              0x00000004
255 #define FILE_ATTRIBUTE_DIRECTORY           0x00000010
256 #define FILE_ATTRIBUTE_ARCHIVE             0x00000020
257 #define FILE_ATTRIBUTE_DEVICE              0x00000040
258 #define FILE_ATTRIBUTE_NORMAL              0x00000080
259 #define FILE_ATTRIBUTE_TEMPORARY           0x00000100
260 #define FILE_ATTRIBUTE_SPARSE_FILE         0x00000200
261 #define FILE_ATTRIBUTE_REPARSE_POINT       0x00000400
262 #define FILE_ATTRIBUTE_COMPRESSED          0x00000800
263 #define FILE_ATTRIBUTE_OFFLINE             0x00001000
264 #define FILE_ATTRIBUTE_NOT_CONTENT_INDEXED 0x00002000
265 #define FILE_ATTRIBUTE_ENCRYPTED           0x00004000
266 #define FILE_ATTRIBUTE_VIRTUAL             0x00010000
267
268 extern struct wim_inode *
269 new_inode(struct wim_dentry *dentry, bool set_timestamps);
270
271 /* Iterate through each alias of the specified inode.  */
272 #define inode_for_each_dentry(dentry, inode) \
273         list_for_each_entry((dentry), &(inode)->i_dentry, d_alias)
274
275 /* Return an alias of the specified inode.  */
276 #define inode_first_dentry(inode) \
277         container_of(inode->i_dentry.next, struct wim_dentry, d_alias)
278
279 /* Return the full path of an alias of the specified inode, or NULL if a full
280  * path could not be determined.  */
281 #define inode_first_full_path(inode) \
282         dentry_full_path(inode_first_dentry(inode))
283
284 extern void
285 d_associate(struct wim_dentry *dentry, struct wim_inode *inode);
286
287 extern void
288 d_disassociate(struct wim_dentry *dentry);
289
290 #ifdef WITH_FUSE
291 extern void
292 inode_dec_num_opened_fds(struct wim_inode *inode);
293 #endif
294
295 /* Is the inode a directory?
296  * This doesn't count directories with reparse data.
297  * wimlib only allows inodes of this type to have children.
298  */
299 static inline bool
300 inode_is_directory(const struct wim_inode *inode)
301 {
302         return (inode->i_attributes & (FILE_ATTRIBUTE_DIRECTORY |
303                                        FILE_ATTRIBUTE_REPARSE_POINT))
304                         == FILE_ATTRIBUTE_DIRECTORY;
305 }
306
307 /* Is the inode a symbolic link?
308  * This returns true iff the inode is a reparse point that is either a "real"
309  * symbolic link or a junction point.  */
310 static inline bool
311 inode_is_symlink(const struct wim_inode *inode)
312 {
313         return (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT)
314                 && (inode->i_reparse_tag == WIM_IO_REPARSE_TAG_SYMLINK ||
315                     inode->i_reparse_tag == WIM_IO_REPARSE_TAG_MOUNT_POINT);
316 }
317
318 /* Does the inode have children?  Currently (based on read_dentry_tree() as well
319  * as the various build-dentry-tree implementations), this can only return true
320  * for inodes for which inode_is_directory() returns true.  */
321 static inline bool
322 inode_has_children(const struct wim_inode *inode)
323 {
324         return inode->i_children != NULL;
325 }
326
327 extern struct wim_inode_stream *
328 inode_get_stream(const struct wim_inode *inode, int stream_type,
329                  const utf16lechar *stream_name);
330
331 extern struct wim_inode_stream *
332 inode_get_unnamed_stream(const struct wim_inode *inode, int stream_type);
333
334 static inline struct wim_inode_stream *
335 inode_get_unnamed_data_stream(const struct wim_inode *inode)
336 {
337         return inode_get_unnamed_stream(inode, STREAM_TYPE_DATA);
338 }
339
340 extern struct wim_inode_stream *
341 inode_add_stream(struct wim_inode *inode, int stream_type,
342                  const utf16lechar *stream_name, struct blob_descriptor *blob);
343
344 extern void
345 inode_replace_stream_blob(struct wim_inode *inode,
346                           struct wim_inode_stream *strm,
347                           struct blob_descriptor *new_blob,
348                           struct blob_table *blob_table);
349
350 extern bool
351 inode_replace_stream_data(struct wim_inode *inode,
352                           struct wim_inode_stream *strm,
353                           const void *data, size_t size,
354                           struct blob_table *blob_table);
355
356 extern bool
357 inode_add_stream_with_data(struct wim_inode *inode, int stream_type,
358                            const utf16lechar *stream_name,
359                            const void *data, size_t size,
360                            struct blob_table *blob_table);
361
362 extern void
363 inode_remove_stream(struct wim_inode *inode, struct wim_inode_stream *strm,
364                     struct blob_table *blob_table);
365
366 static inline struct blob_descriptor *
367 stream_blob_resolved(const struct wim_inode_stream *strm)
368 {
369         wimlib_assert(strm->stream_resolved);
370         return strm->_stream_blob;
371 }
372
373 static inline bool
374 stream_is_named(const struct wim_inode_stream *strm)
375 {
376         return strm->stream_name != NO_STREAM_NAME;
377 }
378
379 static inline bool
380 stream_is_unnamed_data_stream(const struct wim_inode_stream *strm)
381 {
382         return strm->stream_type == STREAM_TYPE_DATA && !stream_is_named(strm);
383 }
384
385 static inline bool
386 stream_is_named_data_stream(const struct wim_inode_stream *strm)
387 {
388         return strm->stream_type == STREAM_TYPE_DATA && stream_is_named(strm);
389 }
390
391 extern bool
392 inode_has_named_data_stream(const struct wim_inode *inode);
393
394 extern int
395 inode_resolve_streams(struct wim_inode *inode,
396                       struct blob_table *table, bool force);
397
398 extern int
399 blob_not_found_error(const struct wim_inode *inode, const u8 *hash);
400
401 extern struct blob_descriptor *
402 stream_blob(const struct wim_inode_stream *strm, const struct blob_table *table);
403
404 extern struct blob_descriptor *
405 inode_get_blob_for_unnamed_data_stream(const struct wim_inode *inode,
406                                        const struct blob_table *blob_table);
407
408 extern struct blob_descriptor *
409 inode_get_blob_for_unnamed_data_stream_resolved(const struct wim_inode *inode);
410
411 extern const u8 *
412 stream_hash(const struct wim_inode_stream *strm);
413
414 extern const u8 *
415 inode_get_hash_of_unnamed_data_stream(const struct wim_inode *inode);
416
417 extern void
418 inode_ref_blobs(struct wim_inode *inode);
419
420 extern void
421 inode_unref_blobs(struct wim_inode *inode, struct blob_table *blob_table);
422
423 /* inode_fixup.c  */
424 extern int
425 dentry_tree_fix_inodes(struct wim_dentry *root, struct hlist_head *inode_list);
426
427 #endif /* _WIMLIB_INODE_H  */