-#ifdef __WIN32__
-
-#include <aclapi.h> /* for SetSecurityInfo() */
+/*
+ * win32_apply.c - Windows-specific code for applying files from a WIM image.
+ */
-#include "win32_common.h"
-#include "wimlib_internal.h"
-#include "dentry.h"
-#include "lookup_table.h"
-#include "endianness.h"
+/*
+ * Copyright (C) 2013 Eric Biggers
+ *
+ * This file is part of wimlib, a library for working with WIM files.
+ *
+ * wimlib is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * wimlib is distributed in the hope that it will be useful, but WITHOUT ANY
+ * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with wimlib; if not, see http://www.gnu.org/licenses/.
+ */
-#define MAX_CREATE_HARD_LINK_WARNINGS 5
-#define MAX_CREATE_SOFT_LINK_WARNINGS 5
+#ifdef __WIN32__
-#define MAX_SET_SD_ACCESS_DENIED_WARNINGS 1
-#define MAX_SET_SACL_PRIV_NOTHELD_WARNINGS 1
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
-static const wchar_t *apply_access_denied_msg =
-L"If you are not running this program as the administrator, you may\n"
- " need to do so, so that all data and metadata can be extracted\n"
- " exactly as the origignal copy. However, if you do not care that\n"
- " the security descriptors are extracted correctly, you could run\n"
- " `wimlib-imagex apply' with the --no-acls flag instead.\n"
- ;
+#include "wimlib/win32_common.h"
+#include "wimlib/apply.h"
+#include "wimlib/error.h"
+#include "wimlib/lookup_table.h"
static int
-win32_extract_try_rpfix(u8 *rpbuf,
- const wchar_t *extract_root_realpath,
- unsigned extract_root_realpath_nchars)
+win32_start_extract(const wchar_t *path, struct apply_ctx *ctx)
{
- struct reparse_data rpdata;
- wchar_t *target;
- size_t target_nchars;
- size_t stripped_nchars;
- wchar_t *stripped_target;
- wchar_t stripped_target_nchars;
int ret;
+ unsigned vol_flags;
+ bool supports_SetFileShortName;
- utf16lechar *new_target;
- utf16lechar *new_print_name;
- size_t new_target_nchars;
- size_t new_print_name_nchars;
- utf16lechar *p;
-
- ret = parse_reparse_data(rpbuf, 8 + le16_to_cpu(*(u16*)(rpbuf + 4)),
- &rpdata);
+ ret = win32_get_vol_flags(path, &vol_flags, &supports_SetFileShortName);
if (ret)
return ret;
- if (extract_root_realpath[0] == L'\0' ||
- extract_root_realpath[1] != L':' ||
- extract_root_realpath[2] != L'\\')
- {
- ERROR("Can't understand full path format \"%ls\". "
- "Try turning reparse point fixups off...",
- extract_root_realpath);
- return WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED;
- }
+ ctx->supported_features.archive_files = 1;
+ ctx->supported_features.hidden_files = 1;
+ ctx->supported_features.system_files = 1;
- ret = parse_substitute_name(rpdata.substitute_name,
- rpdata.substitute_name_nbytes,
- rpdata.rptag);
- if (ret < 0)
- return 0;
- stripped_nchars = ret;
- target = rpdata.substitute_name;
- target_nchars = rpdata.substitute_name_nbytes / sizeof(utf16lechar);
- stripped_target = target + 6;
- stripped_target_nchars = target_nchars - stripped_nchars;
-
- new_target = alloca((6 + extract_root_realpath_nchars +
- stripped_target_nchars) * sizeof(utf16lechar));
-
- p = new_target;
- if (stripped_nchars == 6) {
- /* Include \??\ prefix if it was present before */
- wmemcpy(p, L"\\??\\", 4);
- p += 4;
- }
+ if (vol_flags & FILE_FILE_COMPRESSION)
+ ctx->supported_features.compressed_files = 1;
- /* Print name excludes the \??\ if present. */
- new_print_name = p;
- if (stripped_nchars != 0) {
- /* Get drive letter from real path to extract root, if a drive
- * letter was present before. */
- *p++ = extract_root_realpath[0];
- *p++ = extract_root_realpath[1];
+ if (vol_flags & FILE_SUPPORTS_ENCRYPTION) {
+ ctx->supported_features.encrypted_files = 1;
+ ctx->supported_features.encrypted_directories = 1;
}
- /* Copy the rest of the extract root */
- wmemcpy(p, extract_root_realpath + 2, extract_root_realpath_nchars - 2);
- p += extract_root_realpath_nchars - 2;
-
- /* Append the stripped target */
- wmemcpy(p, stripped_target, stripped_target_nchars);
- p += stripped_target_nchars;
- new_target_nchars = p - new_target;
- new_print_name_nchars = p - new_print_name;
-
- if (new_target_nchars * sizeof(utf16lechar) >= REPARSE_POINT_MAX_SIZE ||
- new_print_name_nchars * sizeof(utf16lechar) >= REPARSE_POINT_MAX_SIZE)
- {
- ERROR("Path names too long to do reparse point fixup!");
- return WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED;
+
+ ctx->supported_features.not_context_indexed_files = 1;
+
+ if (vol_flags & FILE_SUPPORTS_SPARSE_FILES)
+ ctx->supported_features.sparse_files = 1;
+
+ if (vol_flags & FILE_NAMED_STREAMS)
+ ctx->supported_features.named_data_streams = 1;
+
+ if (vol_flags & FILE_SUPPORTS_HARD_LINKS)
+ ctx->supported_features.hard_links = 1;
+
+ if (vol_flags & FILE_SUPPORTS_REPARSE_POINTS) {
+ ctx->supported_features.reparse_points = 1;
+ if (win32func_CreateSymbolicLinkW)
+ ctx->supported_features.symlink_reparse_points = 1;
}
- rpdata.substitute_name = new_target;
- rpdata.substitute_name_nbytes = new_target_nchars * sizeof(utf16lechar);
- rpdata.print_name = new_print_name;
- rpdata.print_name_nbytes = new_print_name_nchars * sizeof(utf16lechar);
- return make_reparse_buffer(&rpdata, rpbuf);
+
+ if (vol_flags & FILE_PERSISTENT_ACLS)
+ ctx->supported_features.security_descriptors = 1;
+
+ if (supports_SetFileShortName)
+ ctx->supported_features.short_names = 1;
+ return 0;
}
-/* Wrapper around the FSCTL_SET_REPARSE_POINT ioctl to set the reparse data on
- * an extracted reparse point. */
static int
-win32_set_reparse_data(HANDLE h,
- const struct wim_inode *inode,
- const struct wim_lookup_table_entry *lte,
- const wchar_t *path,
- struct apply_args *args)
+win32_create_file(const wchar_t *path, struct apply_ctx *ctx, u64 *cookie_ret)
{
- int ret;
- u8 rpbuf[REPARSE_POINT_MAX_SIZE];
- DWORD bytesReturned;
-
- DEBUG("Setting reparse data on \"%ls\"", path);
+ HANDLE h;
- ret = wim_inode_get_reparse_data(inode, rpbuf);
- if (ret)
- return ret;
+ h = CreateFile(path, 0, 0, NULL, CREATE_ALWAYS,
+ FILE_ATTRIBUTE_NORMAL | FILE_FLAG_BACKUP_SEMANTICS, NULL);
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
+ CloseHandle(h);
+ return 0;
- if (args->extract_flags & WIMLIB_EXTRACT_FLAG_RPFIX &&
- (inode->i_reparse_tag == WIM_IO_REPARSE_TAG_SYMLINK ||
- inode->i_reparse_tag == WIM_IO_REPARSE_TAG_MOUNT_POINT) &&
- !inode->i_not_rpfixed)
- {
- ret = win32_extract_try_rpfix(rpbuf,
- args->target_realpath,
- args->target_realpath_len);
- if (ret)
- return WIMLIB_ERR_REPARSE_POINT_FIXUP_FAILED;
- }
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_OPEN;
+}
- /* Set the reparse data on the open file using the
- * FSCTL_SET_REPARSE_POINT ioctl.
- *
- * There are contradictions in Microsoft's documentation for this:
- *
- * "If hDevice was opened without specifying FILE_FLAG_OVERLAPPED,
- * lpOverlapped is ignored."
- *
- * --- So setting lpOverlapped to NULL is okay since it's ignored.
- *
- * "If lpOverlapped is NULL, lpBytesReturned cannot be NULL. Even when an
- * operation returns no output data and lpOutBuffer is NULL,
- * DeviceIoControl makes use of lpBytesReturned. After such an
- * operation, the value of lpBytesReturned is meaningless."
- *
- * --- So lpOverlapped not really ignored, as it affects another
- * parameter. This is the actual behavior: lpBytesReturned must be
- * specified, even though lpBytesReturned is documented as:
- *
- * "Not used with this operation; set to NULL."
- */
- if (!DeviceIoControl(h, FSCTL_SET_REPARSE_POINT, rpbuf,
- 8 + le16_to_cpu(*(u16*)(rpbuf + 4)),
- NULL, 0,
- &bytesReturned /* lpBytesReturned */,
- NULL /* lpOverlapped */))
- {
- DWORD err = GetLastError();
- if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
- {
- args->num_soft_links_failed++;
- if (args->num_soft_links_failed <= MAX_CREATE_SOFT_LINK_WARNINGS) {
- WARNING("Can't set reparse data on \"%ls\": Access denied!\n"
- " You may be trying to extract a symbolic "
- "link without the\n"
- " SeCreateSymbolicLink privilege, which by "
- "default non-Administrator\n"
- " accounts do not have.", path);
- }
- if (args->num_hard_links_failed == MAX_CREATE_HARD_LINK_WARNINGS) {
- WARNING("Suppressing further warnings regarding failure to extract\n"
- " reparse points due to insufficient privileges...");
- }
- } else {
- ERROR("Failed to set reparse data on \"%ls\"", path);
- win32_error(err);
- if (inode->i_reparse_tag == WIM_IO_REPARSE_TAG_SYMLINK ||
- inode->i_reparse_tag == WIM_IO_REPARSE_TAG_MOUNT_POINT)
- return WIMLIB_ERR_LINK;
- else
- return WIMLIB_ERR_WRITE;
- }
- }
+static int
+win32_create_directory(const wchar_t *path, struct apply_ctx *ctx,
+ u64 *cookie_ret)
+{
+ if (!CreateDirectory(path, NULL))
+ if (GetLastError() != ERROR_ALREADY_EXISTS)
+ goto error;
return 0;
+
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_MKDIR;
}
-/* Wrapper around the FSCTL_SET_COMPRESSION ioctl to change the
- * FILE_ATTRIBUTE_COMPRESSED flag of a file or directory. */
static int
-win32_set_compression_state(HANDLE hFile, USHORT format, const wchar_t *path)
+win32_create_hardlink(const wchar_t *oldpath, const wchar_t *newpath,
+ struct apply_ctx *ctx)
{
- DWORD bytesReturned;
- if (!DeviceIoControl(hFile, FSCTL_SET_COMPRESSION,
- &format, sizeof(USHORT),
- NULL, 0,
- &bytesReturned, NULL))
- {
- /* Could be a warning only, but we only call this if the volume
- * supports compression. So I'm calling this an error. */
- DWORD err = GetLastError();
- ERROR("Failed to set compression flag on \"%ls\"", path);
- win32_error(err);
- if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
- return WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT;
- else
- return WIMLIB_ERR_WRITE;
+ if (!CreateHardLink(newpath, oldpath, NULL)) {
+ if (GetLastError() != ERROR_ALREADY_EXISTS)
+ goto error;
+ if (!DeleteFile(newpath))
+ goto error;
+ if (!CreateHardLink(newpath, oldpath, NULL))
+ goto error;
}
return 0;
+
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_LINK;
}
-/* Wrapper around FSCTL_SET_SPARSE ioctl to set a file as sparse. */
static int
-win32_set_sparse(HANDLE hFile, const wchar_t *path)
+win32_create_symlink(const wchar_t *oldpath, const wchar_t *newpath,
+ struct apply_ctx *ctx)
{
- DWORD bytesReturned;
- if (!DeviceIoControl(hFile, FSCTL_SET_SPARSE,
- NULL, 0,
- NULL, 0,
- &bytesReturned, NULL))
- {
- /* Could be a warning only, but we only call this if the volume
- * supports sparse files. So I'm calling this an error. */
- DWORD err = GetLastError();
- WARNING("Failed to set sparse flag on \"%ls\"", path);
- win32_error(err);
- if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
- return WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT;
- else
- return WIMLIB_ERR_WRITE;
+ if (!(*win32func_CreateSymbolicLinkW)(newpath, oldpath, 0)) {
+ if (GetLastError() != ERROR_ALREADY_EXISTS)
+ goto error;
+ if (!DeleteFile(newpath))
+ goto error;
+ if (!(*win32func_CreateSymbolicLinkW)(newpath, oldpath, 0))
+ goto error;
}
return 0;
+
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_LINK;
}
-/*
- * Sets the security descriptor on an extracted file.
- */
static int
-win32_set_security_data(const struct wim_inode *inode,
- HANDLE hFile,
- const wchar_t *path,
- struct apply_args *args)
+win32_extract_wim_chunk(const void *buf, size_t len, void *arg)
{
- PSECURITY_DESCRIPTOR descriptor;
- unsigned long n;
- DWORD err;
- const struct wim_security_data *sd;
-
- SECURITY_INFORMATION securityInformation = 0;
-
- void *owner = NULL;
- void *group = NULL;
- ACL *dacl = NULL;
- ACL *sacl = NULL;
+ HANDLE h = (HANDLE)arg;
+ DWORD nbytes_written;
- BOOL owner_defaulted;
- BOOL group_defaulted;
- BOOL dacl_present;
- BOOL dacl_defaulted;
- BOOL sacl_present;
- BOOL sacl_defaulted;
+ if (unlikely(!WriteFile(h, buf, len, &nbytes_written, NULL)))
+ goto error;
+ if (unlikely(nbytes_written != len))
+ goto error;
+ return 0;
- sd = wim_const_security_data(args->w);
- descriptor = sd->descriptors[inode->i_security_id];
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_WRITE;
+}
- GetSecurityDescriptorOwner(descriptor, &owner, &owner_defaulted);
- if (owner)
- securityInformation |= OWNER_SECURITY_INFORMATION;
+static int
+win32_extract_stream(const wchar_t *path, const wchar_t *stream_name,
+ size_t stream_name_nchars,
+ struct wim_lookup_table_entry *lte, struct apply_ctx *ctx)
+{
+ DWORD creationDisposition = OPEN_EXISTING;
+ wchar_t *stream_path = (wchar_t*)path;
+ HANDLE h;
+ int ret;
- GetSecurityDescriptorGroup(descriptor, &group, &group_defaulted);
- if (group)
- securityInformation |= GROUP_SECURITY_INFORMATION;
+ if (stream_name_nchars) {
+ creationDisposition = CREATE_ALWAYS;
+ stream_path = alloca(sizeof(wchar_t) *
+ (wcslen(path) + 1 +
+ wcslen(stream_name) + 1));
+ tsprintf(stream_path, L"%ls:%ls", path, stream_name);
+ }
- GetSecurityDescriptorDacl(descriptor, &dacl_present,
- &dacl, &dacl_defaulted);
- if (dacl)
- securityInformation |= DACL_SECURITY_INFORMATION;
+ h = CreateFile(stream_path, FILE_WRITE_DATA, 0, NULL,
+ creationDisposition, FILE_FLAG_BACKUP_SEMANTICS |
+ FILE_FLAG_OPEN_REPARSE_POINT,
+ NULL);
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
- GetSecurityDescriptorSacl(descriptor, &sacl_present,
- &sacl, &sacl_defaulted);
- if (sacl)
- securityInformation |= SACL_SECURITY_INFORMATION;
+ ret = 0;
+ if (!lte)
+ goto out_close_handle;
+ ret = extract_wim_resource(lte, wim_resource_size(lte),
+ win32_extract_wim_chunk, h);
+out_close_handle:
+ if (!CloseHandle(h))
+ goto error;
+ if (ret && !errno)
+ errno = -1;
+ return ret;
-again:
- if (securityInformation == 0)
- return 0;
- if (SetSecurityInfo(hFile, SE_FILE_OBJECT,
- securityInformation, owner, group, dacl, sacl))
- return 0;
- err = GetLastError();
- if (args->extract_flags & WIMLIB_EXTRACT_FLAG_STRICT_ACLS)
- goto fail;
- switch (err) {
- case ERROR_PRIVILEGE_NOT_HELD:
- if (securityInformation & SACL_SECURITY_INFORMATION) {
- n = args->num_set_sacl_priv_notheld++;
- securityInformation &= ~SACL_SECURITY_INFORMATION;
- sacl = NULL;
- if (n < MAX_SET_SACL_PRIV_NOTHELD_WARNINGS) {
- WARNING(
-"We don't have enough privileges to set the full security\n"
-" descriptor on \"%ls\"!\n", path);
- if (args->num_set_sd_access_denied +
- args->num_set_sacl_priv_notheld == 1)
- {
- WARNING("%ls", apply_access_denied_msg);
- }
- WARNING("Re-trying with SACL omitted.\n", path);
- } else if (n == MAX_SET_SACL_PRIV_NOTHELD_WARNINGS) {
- WARNING(
-"Suppressing further 'privileges not held' error messages when setting\n"
-" security descriptors.");
- }
- goto again;
- }
- /* Fall through */
- case ERROR_INVALID_OWNER:
- case ERROR_ACCESS_DENIED:
- n = args->num_set_sd_access_denied++;
- if (n < MAX_SET_SD_ACCESS_DENIED_WARNINGS) {
- WARNING("Failed to set security descriptor on \"%ls\": "
- "Access denied!\n", path);
- if (args->num_set_sd_access_denied +
- args->num_set_sacl_priv_notheld == 1)
- {
- WARNING("%ls", apply_access_denied_msg);
- }
- } else if (n == MAX_SET_SD_ACCESS_DENIED_WARNINGS) {
- WARNING(
-"Suppressing further access denied error messages when setting\n"
-" security descriptors");
- }
- return 0;
- default:
-fail:
- ERROR("Failed to set security descriptor on \"%ls\"", path);
- win32_error(err);
- if (err == ERROR_ACCESS_DENIED || err == ERROR_PRIVILEGE_NOT_HELD)
- return WIMLIB_ERR_INSUFFICIENT_PRIVILEGES_TO_EXTRACT;
- else
- return WIMLIB_ERR_WRITE;
- }
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_WRITE;
}
-
static int
-win32_extract_chunk(const void *buf, size_t len, void *arg)
+win32_extract_unnamed_stream(file_spec_t file,
+ struct wim_lookup_table_entry *lte,
+ struct apply_ctx *ctx)
{
- HANDLE hStream = arg;
-
- DWORD nbytes_written;
- wimlib_assert(len <= 0xffffffff);
-
- if (!WriteFile(hStream, buf, len, &nbytes_written, NULL) ||
- nbytes_written != len)
- {
- DWORD err = GetLastError();
- ERROR("WriteFile(): write error");
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- return 0;
+ return win32_extract_stream(file.path, NULL, 0, lte, ctx);
}
static int
-do_win32_extract_stream(HANDLE hStream, const struct wim_lookup_table_entry *lte)
+win32_extract_named_stream(file_spec_t file, const wchar_t *stream_name,
+ size_t stream_name_nchars,
+ struct wim_lookup_table_entry *lte, struct apply_ctx *ctx)
{
- return extract_wim_resource(lte, wim_resource_size(lte),
- win32_extract_chunk, hStream);
+ return win32_extract_stream(file.path, stream_name,
+ stream_name_nchars, lte, ctx);
}
struct win32_encrypted_extract_ctx {
};
static DWORD WINAPI
-win32_encrypted_import_cb(unsigned char *data, void *_ctx,
+win32_encrypted_import_cb(unsigned char *data, void *_import_ctx,
unsigned long *len_p)
{
- struct win32_encrypted_extract_ctx *ctx = _ctx;
+ struct win32_encrypted_extract_ctx *import_ctx = _import_ctx;
unsigned long len = *len_p;
- const struct wim_lookup_table_entry *lte = ctx->lte;
+ const struct wim_lookup_table_entry *lte = import_ctx->lte;
- len = min(len, wim_resource_size(lte) - ctx->offset);
+ len = min(len, wim_resource_size(lte) - import_ctx->offset);
- if (read_partial_wim_resource_into_buf(lte, len, ctx->offset, data))
+ if (read_partial_wim_resource_into_buf(lte, len, import_ctx->offset, data))
return ERROR_READ_FAULT;
- ctx->offset += len;
+ import_ctx->offset += len;
*len_p = len;
return ERROR_SUCCESS;
}
-/* Create an encrypted file and extract the raw encrypted data to it.
- *
- * @path: Path to encrypted file to create.
- * @lte: WIM lookup_table entry for the raw encrypted data.
- *
- * This is separate from do_win32_extract_stream() because the WIM is supposed
- * to contain the *raw* encrypted data, which needs to be extracted ("imported")
- * using the special APIs OpenEncryptedFileRawW(), WriteEncryptedFileRaw(), and
- * CloseEncryptedFileRaw().
- *
- * Returns 0 on success; nonzero on failure.
- */
static int
-do_win32_extract_encrypted_stream(const wchar_t *path,
- const struct wim_lookup_table_entry *lte)
+win32_extract_encrypted_stream(const wchar_t *path,
+ struct wim_lookup_table_entry *lte,
+ struct apply_ctx *ctx)
{
void *file_ctx;
+ DWORD err;
int ret;
+ struct win32_encrypted_extract_ctx extract_ctx;
- DEBUG("Opening file \"%ls\" to extract raw encrypted data", path);
-
- ret = OpenEncryptedFileRawW(path, CREATE_FOR_IMPORT, &file_ctx);
- if (ret) {
- ERROR("Failed to open \"%ls\" to write raw encrypted data", path);
- win32_error(ret);
- return WIMLIB_ERR_OPEN;
+ err = OpenEncryptedFileRaw(path, CREATE_FOR_IMPORT, &file_ctx);
+ if (err != ERROR_SUCCESS) {
+ set_errno_from_win32_error(err);
+ ret = WIMLIB_ERR_OPEN;
+ goto out;
}
- if (lte) {
- struct win32_encrypted_extract_ctx ctx;
-
- ctx.lte = lte;
- ctx.offset = 0;
- ret = WriteEncryptedFileRaw(win32_encrypted_import_cb, &ctx, file_ctx);
- if (ret == ERROR_SUCCESS) {
- ret = 0;
- } else {
- ret = WIMLIB_ERR_WRITE;
- ERROR("Failed to extract encrypted file \"%ls\"", path);
- }
+ extract_ctx.lte = lte;
+ extract_ctx.offset = 0;
+ err = WriteEncryptedFileRaw(win32_encrypted_import_cb, &extract_ctx,
+ file_ctx);
+ if (err != ERROR_SUCCESS) {
+ set_errno_from_win32_error(err);
+ ret = WIMLIB_ERR_WRITE;
+ goto out_close;
}
+
+ ret = 0;
+out_close:
CloseEncryptedFileRaw(file_ctx);
+out:
return ret;
}
-static bool
-path_is_root_of_drive(const wchar_t *path)
+static BOOL
+win32_set_special_file_attributes(const wchar_t *path, u32 attributes)
{
- if (!*path)
- return false;
-
- if (*path != L'/' && *path != L'\\') {
- if (*(path + 1) == L':')
- path += 2;
- else
- return false;
- }
- while (*path == L'/' || *path == L'\\')
- path++;
- return (*path == L'\0');
-}
-
-static inline DWORD
-win32_mask_attributes(DWORD i_attributes)
-{
- return i_attributes & ~(FILE_ATTRIBUTE_SPARSE_FILE |
- FILE_ATTRIBUTE_COMPRESSED |
- FILE_ATTRIBUTE_REPARSE_POINT |
- FILE_ATTRIBUTE_DIRECTORY |
- FILE_ATTRIBUTE_ENCRYPTED |
- FILE_FLAG_DELETE_ON_CLOSE |
- FILE_FLAG_NO_BUFFERING |
- FILE_FLAG_OPEN_NO_RECALL |
- FILE_FLAG_OVERLAPPED |
- FILE_FLAG_RANDOM_ACCESS |
- /*FILE_FLAG_SESSION_AWARE |*/
- FILE_FLAG_SEQUENTIAL_SCAN |
- FILE_FLAG_WRITE_THROUGH);
-}
+ HANDLE h;
+ DWORD err;
+ USHORT compression_format = COMPRESSION_FORMAT_DEFAULT;
+ DWORD bytes_returned;
-static inline DWORD
-win32_get_create_flags_and_attributes(DWORD i_attributes)
-{
- /*
- * Some attributes cannot be set by passing them to CreateFile(). In
- * particular:
- *
- * FILE_ATTRIBUTE_DIRECTORY:
- * CreateDirectory() must be called instead of CreateFile().
- *
- * FILE_ATTRIBUTE_SPARSE_FILE:
- * Needs an ioctl.
- * See: win32_set_sparse().
- *
- * FILE_ATTRIBUTE_COMPRESSED:
- * Not clear from the documentation, but apparently this needs an
- * ioctl as well.
- * See: win32_set_compressed().
- *
- * FILE_ATTRIBUTE_REPARSE_POINT:
- * Needs an ioctl, with the reparse data specified.
- * See: win32_set_reparse_data().
- *
- * In addition, clear any file flags in the attributes that we don't
- * want, but also specify FILE_FLAG_OPEN_REPARSE_POINT and
- * FILE_FLAG_BACKUP_SEMANTICS as we are a backup application.
- */
- return win32_mask_attributes(i_attributes) |
- FILE_FLAG_OPEN_REPARSE_POINT |
- FILE_FLAG_BACKUP_SEMANTICS;
-}
+ h = win32_open_existing_file(path, GENERIC_READ | GENERIC_WRITE);
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
-/* Set compression and/or sparse attributes on a stream, if supported by the
- * volume. */
-static int
-win32_set_special_stream_attributes(HANDLE hFile, const struct wim_inode *inode,
- struct wim_lookup_table_entry *unnamed_stream_lte,
- const wchar_t *path, unsigned vol_flags)
-{
- int ret;
+ if (attributes & FILE_ATTRIBUTE_SPARSE_FILE)
+ if (!DeviceIoControl(h, FSCTL_SET_SPARSE,
+ NULL, 0,
+ NULL, 0,
+ &bytes_returned, NULL))
+ goto error_close_handle;
- if (inode->i_attributes & FILE_ATTRIBUTE_COMPRESSED) {
- if (vol_flags & FILE_FILE_COMPRESSION) {
- ret = win32_set_compression_state(hFile,
- COMPRESSION_FORMAT_DEFAULT,
- path);
- if (ret)
- return ret;
- } else {
- DEBUG("Cannot set compression attribute on \"%ls\": "
- "volume does not support transparent compression",
- path);
- }
- }
+ if (attributes & FILE_ATTRIBUTE_COMPRESSED)
+ if (!DeviceIoControl(h, FSCTL_SET_COMPRESSION,
+ &compression_format, sizeof(USHORT),
+ NULL, 0,
+ &bytes_returned, NULL))
+ goto error_close_handle;
- if (inode->i_attributes & FILE_ATTRIBUTE_SPARSE_FILE) {
- if (vol_flags & FILE_SUPPORTS_SPARSE_FILES) {
- DEBUG("Setting sparse flag on \"%ls\"", path);
- ret = win32_set_sparse(hFile, path);
- if (ret)
- return ret;
- } else {
- DEBUG("Cannot set sparse attribute on \"%ls\": "
- "volume does not support sparse files",
- path);
- }
- }
- return 0;
-}
+ if (!CloseHandle(h))
+ goto error;
-/* Pre-create directories; extract encrypted streams */
-static int
-win32_begin_extract_unnamed_stream(const struct wim_inode *inode,
- const struct wim_lookup_table_entry *lte,
- const wchar_t *path,
- DWORD *creationDisposition_ret,
- unsigned int vol_flags)
-{
- DWORD err;
- int ret;
+ if (attributes & FILE_ATTRIBUTE_ENCRYPTED)
+ if (!EncryptFile(path))
+ goto error;
- /* Directories must be created with CreateDirectoryW(). Then the call
- * to CreateFileW() will merely open the directory that was already
- * created rather than creating a new file. */
- if (inode->i_attributes & FILE_ATTRIBUTE_DIRECTORY &&
- !path_is_root_of_drive(path)) {
- if (!CreateDirectoryW(path, NULL)) {
- err = GetLastError();
- if (err != ERROR_ALREADY_EXISTS) {
- ERROR("Failed to create directory \"%ls\"",
- path);
- win32_error(err);
- return WIMLIB_ERR_MKDIR;
- }
- }
- DEBUG("Created directory \"%ls\"", path);
- *creationDisposition_ret = OPEN_EXISTING;
- }
- if (inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED &&
- vol_flags & FILE_SUPPORTS_ENCRYPTION)
- {
- if (inode->i_attributes & FILE_ATTRIBUTE_DIRECTORY) {
- unsigned remaining_sharing_violations = 100;
- while (!EncryptFile(path)) {
- if (remaining_sharing_violations &&
- err == ERROR_SHARING_VIOLATION)
- {
- WARNING("Couldn't encrypt directory \"%ls\" "
- "due to sharing violation; re-trying "
- "after 100 ms", path);
- Sleep(100);
- remaining_sharing_violations--;
- } else {
- err = GetLastError();
- ERROR("Failed to encrypt directory \"%ls\"",
- path);
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- }
- } else {
- ret = do_win32_extract_encrypted_stream(path, lte);
- if (ret)
- return ret;
- DEBUG("Extracted encrypted file \"%ls\"", path);
- }
- *creationDisposition_ret = OPEN_EXISTING;
- }
+ return TRUE;
- /* Set file attributes if we created the file. Otherwise, we haven't
- * created the file set and we will set the attributes in the call to
- * CreateFileW().
- *
- * The FAT filesystem does not let you change the attributes of the root
- * directory, so treat that as a special case and do not set attributes.
- * */
- if (*creationDisposition_ret == OPEN_EXISTING &&
- !path_is_root_of_drive(path))
- {
- if (!SetFileAttributesW(path,
- win32_mask_attributes(inode->i_attributes)))
- {
- err = GetLastError();
- ERROR("Failed to set attributes on \"%ls\"", path);
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- }
- return 0;
+error_close_handle:
+ err = GetLastError();
+ CloseHandle(h);
+ SetLastError(err);
+error:
+ return FALSE;
}
-/* Set security descriptor and extract stream data or reparse data (skip the
- * unnamed data stream of encrypted files, which was already extracted). */
static int
-win32_finish_extract_stream(HANDLE h, const struct wim_dentry *dentry,
- const struct wim_lookup_table_entry *lte,
- const wchar_t *stream_path,
- const wchar_t *stream_name_utf16,
- struct apply_args *args)
+win32_set_file_attributes(const wchar_t *path, u32 attributes,
+ struct apply_ctx *ctx, unsigned pass)
{
- int ret = 0;
- const struct wim_inode *inode = dentry->d_inode;
- const wchar_t *short_name;
- if (stream_name_utf16 == NULL) {
- /* Unnamed stream. */
-
- /* Set security descriptor, unless the extract_flags indicate
- * not to or the volume does not supported it. Note that this
- * is only done when the unnamed stream is being extracted, as
- * security descriptors are per-file and not per-stream. */
- if (inode->i_security_id >= 0 &&
- !(args->extract_flags & WIMLIB_EXTRACT_FLAG_NO_ACLS)
- && (args->vol_flags & FILE_PERSISTENT_ACLS))
- {
- ret = win32_set_security_data(inode, h, stream_path, args);
- if (ret)
- return ret;
- }
+ u32 special_attributes =
+ FILE_ATTRIBUTE_REPARSE_POINT |
+ FILE_ATTRIBUTE_DIRECTORY |
+ FILE_ATTRIBUTE_SPARSE_FILE |
+ FILE_ATTRIBUTE_COMPRESSED |
+ FILE_ATTRIBUTE_ENCRYPTED;
+ u32 actual_attributes;
+
+ /* Delay setting FILE_ATTRIBUTE_READONLY on the initial pass (when files
+ * are created, but data not extracted); otherwise the system will
+ * refuse access to the file even if the process has SeRestorePrivilege.
+ */
+ if (pass == 0)
+ attributes &= ~FILE_ATTRIBUTE_READONLY;
- /* Handle reparse points. The data for them needs to be set
- * using a special ioctl. Note that the reparse point may have
- * been created using CreateFileW() in the case of
- * non-directories or CreateDirectoryW() in the case of
- * directories; but the ioctl works either way. Also, it is
- * only this step that actually sets the
- * FILE_ATTRIBUTE_REPARSE_POINT, as it is not valid to set it
- * using SetFileAttributesW() or CreateFileW().
- *
- * If the volume does not support reparse points we simply
- * ignore the reparse data. (N.B. the code currently doesn't
- * actually reach this case because reparse points are skipped
- * entirely on such volumes.) */
- if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT) {
- if (args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS) {
- ret = win32_set_reparse_data(h, inode,
- lte, stream_path,
- args);
- if (ret)
- return ret;
- } else {
- DEBUG("Cannot set reparse data on \"%ls\": volume "
- "does not support reparse points", stream_path);
- }
- } else if (lte != NULL &&
- !(args->vol_flags & FILE_SUPPORTS_ENCRYPTION &&
- inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED))
- {
- /* Extract the data of the unnamed stream, unless the
- * lookup table entry is NULL (indicating an empty
- * stream for which no data needs to be extracted), or
- * the stream is encrypted and therefore was already
- * extracted as a special case. */
- ret = do_win32_extract_stream(h, lte);
- if (ret)
- return ret;
- }
+ if (!SetFileAttributes(path, attributes & ~special_attributes))
+ goto error;
- if (dentry_has_short_name(dentry))
- short_name = dentry->short_name;
- else
- short_name = L"";
- /* Set short name */
- if (!SetFileShortNameW(h, short_name)) {
- #if 0
+ if (pass != 0)
+ return 0;
+
+ if (attributes & (FILE_ATTRIBUTE_SPARSE_FILE |
+ FILE_ATTRIBUTE_ENCRYPTED |
+ FILE_ATTRIBUTE_COMPRESSED))
+ if (!win32_set_special_file_attributes(path, attributes))
+ goto error;
+
+ /* If file is not supposed to be encrypted or compressed, remove
+ * defaulted encrypted or compressed attributes (from creating file in
+ * encrypted or compressed directory). */
+ actual_attributes = GetFileAttributes(path);
+ if (actual_attributes == INVALID_FILE_ATTRIBUTES)
+ goto error;
+
+ if ((actual_attributes & FILE_ATTRIBUTE_ENCRYPTED) &&
+ !(attributes & FILE_ATTRIBUTE_ENCRYPTED))
+ if (!DecryptFile(path, 0))
+ goto error;
+ if ((actual_attributes & FILE_ATTRIBUTE_COMPRESSED) &&
+ !(attributes & FILE_ATTRIBUTE_COMPRESSED))
+ {
+ HANDLE h;
+ DWORD bytes_returned;
+ USHORT compression_format = COMPRESSION_FORMAT_NONE;
+
+ h = win32_open_existing_file(path, GENERIC_READ | GENERIC_WRITE);
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
+
+ if (!DeviceIoControl(h, FSCTL_SET_COMPRESSION,
+ &compression_format, sizeof(USHORT),
+ NULL, 0,
+ &bytes_returned, NULL))
+ {
DWORD err = GetLastError();
- ERROR("Could not set short name on \"%ls\"", stream_path);
- win32_error(err);
- #endif
- }
- } else {
- /* Extract the data for a named data stream. */
- if (lte != NULL) {
- DEBUG("Extracting named data stream \"%ls\" (len = %"PRIu64")",
- stream_path, wim_resource_size(lte));
- ret = do_win32_extract_stream(h, lte);
+ CloseHandle(h);
+ SetLastError(err);
+ goto error;
}
- }
- return ret;
-}
-static int
-win32_decrypt_file(HANDLE open_handle, const wchar_t *path)
-{
- DWORD err;
- /* We cannot call DecryptFileW() while there is an open handle to the
- * file. So close it first. */
- if (!CloseHandle(open_handle)) {
- err = GetLastError();
- ERROR("Failed to close handle for \"%ls\"", path);
- win32_error(err);
- return WIMLIB_ERR_WRITE;
- }
- if (!DecryptFileW(path, 0 /* reserved parameter; set to 0 */)) {
- err = GetLastError();
- ERROR("Failed to decrypt file \"%ls\"", path);
- win32_error(err);
- return WIMLIB_ERR_WRITE;
+ if (!CloseHandle(h))
+ goto error;
}
+
return 0;
+
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_SET_ATTRIBUTES;
}
-/*
- * Create and extract a stream to a file, or create a directory, using the
- * Windows API.
- *
- * This handles reparse points, directories, alternate data streams, encrypted
- * files, compressed files, etc.
- *
- * @dentry: WIM dentry for the file or directory being extracted.
- *
- * @path: Path to extract the file to.
- *
- * @stream_name_utf16:
- * Name of the stream, or NULL if the stream is unnamed. This will
- * be called with a NULL stream_name_utf16 before any non-NULL
- * stream_name_utf16's.
- *
- * @lte: WIM lookup table entry for the stream. May be NULL to indicate
- * a stream of length 0.
- *
- * @args: Additional apply context, including flags indicating supported
- * volume features.
- *
- * Returns 0 on success; nonzero on failure.
- */
static int
-win32_extract_stream(const struct wim_dentry *dentry,
- const wchar_t *path,
- const wchar_t *stream_name_utf16,
- struct wim_lookup_table_entry *lte,
- struct apply_args *args)
+win32_set_reparse_data(const wchar_t *path, const u8 *rpbuf, u16 rpbuflen,
+ struct apply_ctx *ctx)
{
- wchar_t *stream_path;
HANDLE h;
- int ret;
DWORD err;
- DWORD creationDisposition = CREATE_ALWAYS;
- DWORD requestedAccess;
- BY_HANDLE_FILE_INFORMATION file_info;
- unsigned remaining_sharing_violations = 1000;
- const struct wim_inode *inode = dentry->d_inode;
-
- if (stream_name_utf16) {
- /* Named stream. Create a buffer that contains the UTF-16LE
- * string [./]path:stream_name_utf16. This is needed to
- * create and open the stream using CreateFileW(). I'm not
- * aware of any other APIs to do this. Note: the '$DATA' suffix
- * seems to be unneeded. Additional note: a "./" prefix needs
- * to be added when the path is not absolute to avoid ambiguity
- * with drive letters. */
- size_t stream_path_nchars;
- size_t path_nchars;
- size_t stream_name_nchars;
- const wchar_t *prefix;
-
- path_nchars = wcslen(path);
- stream_name_nchars = wcslen(stream_name_utf16);
- stream_path_nchars = path_nchars + 1 + stream_name_nchars;
- if (path[0] != cpu_to_le16(L'\0') &&
- path[0] != cpu_to_le16(L'/') &&
- path[0] != cpu_to_le16(L'\\') &&
- path[1] != cpu_to_le16(L':'))
- {
- prefix = L"./";
- stream_path_nchars += 2;
- } else {
- prefix = L"";
- }
- stream_path = alloca((stream_path_nchars + 1) * sizeof(wchar_t));
- swprintf(stream_path, L"%ls%ls:%ls",
- prefix, path, stream_name_utf16);
- } else {
- /* Unnamed stream; its path is just the path to the file itself.
- * */
- stream_path = (wchar_t*)path;
-
- ret = win32_begin_extract_unnamed_stream(inode, lte, path,
- &creationDisposition,
- args->vol_flags);
- if (ret)
- goto fail;
- }
-
- DEBUG("Opening \"%ls\"", stream_path);
- /* DELETE access is needed for SetFileShortNameW(), for some reason. */
- requestedAccess = GENERIC_READ | GENERIC_WRITE | DELETE |
- ACCESS_SYSTEM_SECURITY;
-try_open_again:
- /* Open the stream to be extracted. Depending on what we have set
- * creationDisposition to, we may be creating this for the first time,
- * or we may be opening on existing stream we already created using
- * CreateDirectoryW() or OpenEncryptedFileRawW(). */
- h = CreateFileW(stream_path,
- requestedAccess,
- FILE_SHARE_READ,
- NULL,
- creationDisposition,
- win32_get_create_flags_and_attributes(inode->i_attributes),
- NULL);
- if (h == INVALID_HANDLE_VALUE) {
- err = GetLastError();
- if (err == ERROR_ACCESS_DENIED &&
- path_is_root_of_drive(stream_path))
- {
- ret = 0;
- goto out;
- }
- if ((err == ERROR_PRIVILEGE_NOT_HELD ||
- err == ERROR_ACCESS_DENIED) &&
- (requestedAccess & ACCESS_SYSTEM_SECURITY))
- {
- /* Try opening the file again without privilege to
- * modify SACL. */
- requestedAccess &= ~ACCESS_SYSTEM_SECURITY;
- goto try_open_again;
- }
- if (err == ERROR_SHARING_VIOLATION) {
- if (remaining_sharing_violations) {
- --remaining_sharing_violations;
- /* This can happen when restoring encrypted directories
- * for some reason. Probably a bug in EncryptFile(). */
- WARNING("Couldn't open \"%ls\" due to sharing violation; "
- "re-trying after 100ms", stream_path);
- Sleep(100);
- goto try_open_again;
- } else {
- ERROR("Too many sharing violations; giving up...");
- }
- } else {
- if (creationDisposition == OPEN_EXISTING)
- ERROR("Failed to open \"%ls\"", stream_path);
- else
- ERROR("Failed to create \"%ls\"", stream_path);
- win32_error(err);
- }
- ret = WIMLIB_ERR_OPEN;
- goto fail;
- }
+ DWORD bytes_returned;
- /* Check the attributes of the file we just opened, and remove
- * encryption or compression if either was set by default but is not
- * supposed to be set based on the WIM inode attributes. */
- if (!GetFileInformationByHandle(h, &file_info)) {
- err = GetLastError();
- ERROR("Failed to get attributes of \"%ls\"", stream_path);
- win32_error(err);
- ret = WIMLIB_ERR_STAT;
- goto fail_close_handle;
- }
+ h = win32_open_existing_file(path, GENERIC_WRITE);
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
- /* Remove encryption? */
- if (file_info.dwFileAttributes & FILE_ATTRIBUTE_ENCRYPTED &&
- !(inode->i_attributes & FILE_ATTRIBUTE_ENCRYPTED))
- {
- /* File defaulted to encrypted due to being in an encrypted
- * directory, but is not actually supposed to be encrypted.
- *
- * This is a workaround, because I'm not aware of any way to
- * directly (e.g. with CreateFileW()) create an unencrypted file
- * in a directory with FILE_ATTRIBUTE_ENCRYPTED set. */
- ret = win32_decrypt_file(h, stream_path);
- if (ret)
- goto fail; /* win32_decrypt_file() closed the handle. */
- creationDisposition = OPEN_EXISTING;
- goto try_open_again;
- }
+ if (!DeviceIoControl(h, FSCTL_SET_REPARSE_POINT,
+ (void*)rpbuf, rpbuflen,
+ NULL, 0, &bytes_returned, NULL))
+ goto error_close_handle;
- /* Remove compression? */
- if (file_info.dwFileAttributes & FILE_ATTRIBUTE_COMPRESSED &&
- !(inode->i_attributes & FILE_ATTRIBUTE_COMPRESSED))
- {
- /* Similar to the encrypted case, above, if the file defaulted
- * to compressed due to being in an compressed directory, but is
- * not actually supposed to be compressed, explicitly set the
- * compression format to COMPRESSION_FORMAT_NONE. */
- ret = win32_set_compression_state(h, COMPRESSION_FORMAT_NONE,
- stream_path);
- if (ret)
- goto fail_close_handle;
- }
+ if (!CloseHandle(h))
+ goto error;
- /* Set compression and/or sparse attributes if needed */
- ret = win32_set_special_stream_attributes(h, inode, lte, path,
- args->vol_flags);
+ return 0;
- if (ret)
- goto fail_close_handle;
-
- /* At this point we have at least created the needed stream with the
- * appropriate attributes. We have yet to set the appropriate security
- * descriptor and actually extract the stream data (other than for
- * extracted files, which were already extracted).
- * win32_finish_extract_stream() handles these additional steps. */
- ret = win32_finish_extract_stream(h, dentry, lte, stream_path,
- stream_name_utf16, args);
- if (ret)
- goto fail_close_handle;
-
- /* Done extracting the stream. Close the handle and return. */
- DEBUG("Closing \"%ls\"", stream_path);
- if (!CloseHandle(h)) {
- err = GetLastError();
- ERROR("Failed to close \"%ls\"", stream_path);
- win32_error(err);
- ret = WIMLIB_ERR_WRITE;
- goto fail;
- }
- ret = 0;
- goto out;
-fail_close_handle:
+error_close_handle:
+ err = GetLastError();
CloseHandle(h);
-fail:
- ERROR("Error extracting \"%ls\"", stream_path);
-out:
- return ret;
+ SetLastError(err);
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_WRITE; /* XXX: need better error code */
}
-/*
- * Creates a file, directory, or reparse point and extracts all streams to it
- * (unnamed data stream and/or reparse point stream, plus any alternate data
- * streams). Handles sparse, compressed, and/or encrypted files.
- *
- * @dentry: WIM dentry for this file or directory.
- * @path: UTF-16LE external path to extract the inode to.
- * @args: Additional extraction context.
- *
- * Returns 0 on success; nonzero on failure.
- */
static int
-win32_extract_streams(const struct wim_dentry *dentry,
- const wchar_t *path, struct apply_args *args)
+win32_set_short_name(const wchar_t *path, const wchar_t *short_name,
+ size_t short_name_nchars, struct apply_ctx *ctx)
{
- struct wim_lookup_table_entry *unnamed_lte;
- int ret;
- const struct wim_inode *inode = dentry->d_inode;
+ HANDLE h;
+ DWORD err;
- /* First extract the unnamed stream. */
+ h = win32_open_existing_file(path, GENERIC_WRITE | DELETE);
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
- unnamed_lte = inode_unnamed_lte_resolved(inode);
- ret = win32_extract_stream(dentry, path, NULL, unnamed_lte, args);
- if (ret)
- goto out;
+ if (short_name_nchars) {
+ if (!SetFileShortName(h, short_name))
+ goto error_close_handle;
+ } else if (running_on_windows_7_or_later()) {
+ if (!SetFileShortName(h, L""))
+ goto error_close_handle;
+ }
- /* Extract any named streams, if supported by the volume. */
+ if (!CloseHandle(h))
+ goto error;
- if (!(args->vol_flags & FILE_NAMED_STREAMS))
- goto out;
- for (u16 i = 0; i < inode->i_num_ads; i++) {
- const struct wim_ads_entry *ads_entry = &inode->i_ads_entries[i];
-
- /* Skip the unnamed stream if it's in the ADS entries (we
- * already extracted it...) */
- if (ads_entry->stream_name_nbytes == 0)
- continue;
-
- /* Skip special UNIX data entries (see documentation for
- * WIMLIB_ADD_FLAG_UNIX_DATA) */
- if (ads_entry->stream_name_nbytes == WIMLIB_UNIX_DATA_TAG_UTF16LE_NBYTES
- && !memcmp(ads_entry->stream_name,
- WIMLIB_UNIX_DATA_TAG_UTF16LE,
- WIMLIB_UNIX_DATA_TAG_UTF16LE_NBYTES))
- continue;
-
- /* Extract the named stream */
- ret = win32_extract_stream(dentry,
- path,
- ads_entry->stream_name,
- ads_entry->lte,
- args);
- if (ret)
- break;
- }
-out:
- return ret;
+ return 0;
+
+error_close_handle:
+ err = GetLastError();
+ CloseHandle(h);
+ SetLastError(err);
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_WRITE; /* XXX: need better error code */
}
-/* If not done already, load the supported feature flags for the volume onto
- * which the image is being extracted, and warn the user about any missing
- * features that could be important. */
-static int
-win32_check_vol_flags(const wchar_t *output_path, struct apply_args *args)
+static DWORD
+do_win32_set_security_descriptor(HANDLE h, const wchar_t *path,
+ SECURITY_INFORMATION info,
+ PSECURITY_DESCRIPTOR desc)
{
- if (args->have_vol_flags)
- return 0;
-
- win32_get_vol_flags(output_path, &args->vol_flags);
- args->have_vol_flags = true;
- /* Warn the user about data that may not be extracted. */
- if (!(args->vol_flags & FILE_SUPPORTS_SPARSE_FILES))
- WARNING("Volume does not support sparse files!\n"
- " Sparse files will be extracted as non-sparse.");
- if (!(args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS))
- WARNING("Volume does not support reparse points!\n"
- " Reparse point data will not be extracted.");
- if (!(args->vol_flags & FILE_NAMED_STREAMS)) {
- WARNING("Volume does not support named data streams!\n"
- " Named data streams will not be extracted.");
- }
- if (!(args->vol_flags & FILE_SUPPORTS_ENCRYPTION)) {
- WARNING("Volume does not support encryption!\n"
- " Encrypted files will be extracted as raw data.");
- }
- if (!(args->vol_flags & FILE_FILE_COMPRESSION)) {
- WARNING("Volume does not support transparent compression!\n"
- " Compressed files will be extracted as non-compressed.");
- }
- if (!(args->vol_flags & FILE_PERSISTENT_ACLS)) {
- if (args->extract_flags & WIMLIB_EXTRACT_FLAG_STRICT_ACLS) {
- ERROR("Strict ACLs requested, but the volume does not "
- "support ACLs!");
- return WIMLIB_ERR_VOLUME_LACKS_FEATURES;
- } else {
- WARNING("Volume does not support persistent ACLS!\n"
- " File permissions will not be extracted.");
- }
- }
- return 0;
+#ifdef WITH_NTDLL
+ if (func_NtSetSecurityObject) {
+ return (*func_RtlNtStatusToDosError)(
+ (*func_NtSetSecurityObject)(h, info, desc));
+ }
+#endif
+ if (SetFileSecurity(path, info, desc))
+ return ERROR_SUCCESS;
+ else
+ return GetLastError();
}
-/*
- * Try extracting a hard link.
- *
- * @output_path: Path to link to be extracted.
- *
- * @inode: WIM inode that the link is to; inode->i_extracted_file
- * the path to a name of the file that has already been
- * extracted (we use this to create the hard link).
- *
- * @args: Additional apply context, used here to keep track of
- * the number of times creating a hard link failed due to
- * ERROR_INVALID_FUNCTION. This error should indicate that hard
- * links are not supported by the volume, and we would like to
- * warn the user a few times, but not too many times.
- *
- * Returns 0 if the hard link was successfully extracted. Returns
- * WIMLIB_ERR_LINK (> 0) if an error occurred, other than hard links possibly
- * being unsupported by the volume. Returns a negative value if creating the
- * hard link failed due to ERROR_INVALID_FUNCTION.
- */
static int
-win32_try_hard_link(const wchar_t *output_path, const struct wim_inode *inode,
- struct apply_args *args)
+win32_set_security_descriptor(const wchar_t *path, const u8 *desc,
+ size_t desc_size, struct apply_ctx *ctx)
{
+ SECURITY_INFORMATION info;
+ HANDLE h;
DWORD err;
+ int ret;
- /* There is a volume flag for this (FILE_SUPPORTS_HARD_LINKS),
- * but it's only available on Windows 7 and later. So no use
- * even checking it, really. Instead, CreateHardLinkW() will
- * apparently return ERROR_INVALID_FUNCTION if the volume does
- * not support hard links. */
- DEBUG("Creating hard link \"%ls => %ls\"",
- output_path, inode->i_extracted_file);
- if (CreateHardLinkW(output_path, inode->i_extracted_file, NULL))
- return 0;
+ info = OWNER_SECURITY_INFORMATION | GROUP_SECURITY_INFORMATION |
+ DACL_SECURITY_INFORMATION | SACL_SECURITY_INFORMATION;
+ h = INVALID_HANDLE_VALUE;
- err = GetLastError();
- if (err != ERROR_INVALID_FUNCTION) {
- ERROR("Can't create hard link \"%ls => %ls\"",
- output_path, inode->i_extracted_file);
- win32_error(err);
- return WIMLIB_ERR_LINK;
- } else {
- args->num_hard_links_failed++;
- if (args->num_hard_links_failed <= MAX_CREATE_HARD_LINK_WARNINGS) {
- WARNING("Can't create hard link \"%ls => %ls\":\n"
- " Volume does not support hard links!\n"
- " Falling back to extracting a copy of the file.",
- output_path, inode->i_extracted_file);
+#ifdef WITH_NTDLL
+ if (func_NtSetSecurityObject) {
+ h = win32_open_existing_file(path, MAXIMUM_ALLOWED);
+ if (h == INVALID_HANDLE_VALUE) {
+ ERROR_WITH_ERRNO("Can't open %ls (%u)", path, GetLastError());
+ goto error;
}
- if (args->num_hard_links_failed == MAX_CREATE_HARD_LINK_WARNINGS) {
- WARNING("Suppressing further hard linking warnings...");
- }
- return -1;
}
-}
+#endif
-/* Extract a file, directory, reparse point, or hard link to an
- * already-extracted file using the Win32 API */
-int
-win32_do_apply_dentry(const wchar_t *output_path,
- size_t output_path_num_chars,
- struct wim_dentry *dentry,
- struct apply_args *args)
-{
- int ret;
- struct wim_inode *inode = dentry->d_inode;
-
- ret = win32_check_vol_flags(output_path, args);
- if (ret)
- return ret;
- if (inode->i_nlink > 1 && inode->i_extracted_file != NULL) {
- /* Linked file, with another name already extracted. Create a
- * hard link. */
- ret = win32_try_hard_link(output_path, inode, args);
- if (ret >= 0)
- return ret;
- /* Negative return value from win32_try_hard_link() indicates
- * that hard links are probably not supported by the volume.
- * Fall back to extracting a copy of the file. */
- }
-
- /* If this is a reparse point and the volume does not support reparse
- * points, just skip it completely. */
- if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT &&
- !(args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS))
- {
- WARNING("Skipping extraction of reparse point \"%ls\":\n"
- " Not supported by destination filesystem",
- output_path);
- } else {
- /* Create the file, directory, or reparse point, and extract the
- * data streams. */
- ret = win32_extract_streams(dentry, output_path, args);
- if (ret)
- return ret;
- }
- if (inode->i_extracted_file == NULL) {
- const struct wim_lookup_table_entry *lte;
-
- /* Tally bytes extracted, including all alternate data streams,
- * unless we extracted a hard link (or, at least extracted a
- * name that was supposed to be a hard link) */
- for (unsigned i = 0; i <= inode->i_num_ads; i++) {
- lte = inode_stream_lte_resolved(inode, i);
- if (lte)
- args->progress.extract.completed_bytes +=
- wim_resource_size(lte);
- }
- if (inode->i_nlink > 1) {
- /* Save extracted path for a later call to
- * CreateHardLinkW() if this inode has multiple links.
- * */
- inode->i_extracted_file = WSTRDUP(output_path);
- if (!inode->i_extracted_file)
- return WIMLIB_ERR_NOMEM;
+ for (;;) {
+ err = do_win32_set_security_descriptor(h, path, info,
+ (PSECURITY_DESCRIPTOR)desc);
+ if (err == ERROR_SUCCESS)
+ break;
+ if ((err == ERROR_PRIVILEGE_NOT_HELD ||
+ err == ERROR_ACCESS_DENIED) &&
+ !(ctx->extract_flags & WIMLIB_EXTRACT_FLAG_STRICT_ACLS))
+ {
+ if (info & SACL_SECURITY_INFORMATION) {
+ info &= ~SACL_SECURITY_INFORMATION;
+ ctx->partial_security_descriptors++;
+ continue;
+ }
+ if (info & DACL_SECURITY_INFORMATION) {
+ info &= ~DACL_SECURITY_INFORMATION;
+ continue;
+ }
+ if (info & OWNER_SECURITY_INFORMATION) {
+ info &= ~OWNER_SECURITY_INFORMATION;
+ continue;
+ }
+ ctx->partial_security_descriptors--;
+ ctx->no_security_descriptors++;
+ break;
}
+ SetLastError(err);
+ goto error;
}
- return 0;
+ ret = 0;
+out_close:
+#ifdef WITH_NTDLL
+ if (func_NtSetSecurityObject)
+ CloseHandle(h);
+#endif
+ return ret;
+
+error:
+ set_errno_from_GetLastError();
+ ret = WIMLIB_ERR_SET_SECURITY;
+ goto out_close;
}
-/* Set timestamps on an extracted file using the Win32 API */
-int
-win32_do_apply_dentry_timestamps(const wchar_t *path,
- size_t path_num_chars,
- struct wim_dentry *dentry,
- struct apply_args *args)
+static int
+win32_set_timestamps(const wchar_t *path, u64 creation_time,
+ u64 last_write_time, u64 last_access_time,
+ struct apply_ctx *ctx)
{
- DWORD err;
HANDLE h;
- const struct wim_inode *inode = dentry->d_inode;
-
- if (inode->i_attributes & FILE_ATTRIBUTE_REPARSE_POINT &&
- !(args->vol_flags & FILE_SUPPORTS_REPARSE_POINTS))
- {
- /* Skip reparse points not extracted */
- return 0;
- }
-
- /* Windows doesn't let you change the timestamps of the root directory
- * (at least on FAT, which is dumb but expected since FAT doesn't store
- * any metadata about the root directory...) */
- if (path_is_root_of_drive(path))
- return 0;
+ DWORD err;
+ FILETIME creationTime = {.dwLowDateTime = creation_time & 0xffffffff,
+ .dwHighDateTime = creation_time >> 32};
+ FILETIME lastAccessTime = {.dwLowDateTime = last_access_time & 0xffffffff,
+ .dwHighDateTime = last_access_time >> 32};
+ FILETIME lastWriteTime = {.dwLowDateTime = last_write_time & 0xffffffff,
+ .dwHighDateTime = last_write_time >> 32};
- DEBUG("Opening \"%ls\" to set timestamps", path);
h = win32_open_existing_file(path, FILE_WRITE_ATTRIBUTES);
- if (h == INVALID_HANDLE_VALUE) {
- err = GetLastError();
- goto fail;
- }
+ if (h == INVALID_HANDLE_VALUE)
+ goto error;
- FILETIME creationTime = {.dwLowDateTime = inode->i_creation_time & 0xffffffff,
- .dwHighDateTime = inode->i_creation_time >> 32};
- FILETIME lastAccessTime = {.dwLowDateTime = inode->i_last_access_time & 0xffffffff,
- .dwHighDateTime = inode->i_last_access_time >> 32};
- FILETIME lastWriteTime = {.dwLowDateTime = inode->i_last_write_time & 0xffffffff,
- .dwHighDateTime = inode->i_last_write_time >> 32};
+ if (!SetFileTime(h, &creationTime, &lastAccessTime, &lastWriteTime))
+ goto error_close_handle;
+
+ if (!CloseHandle(h))
+ goto error;
- DEBUG("Calling SetFileTime() on \"%ls\"", path);
- if (!SetFileTime(h, &creationTime, &lastAccessTime, &lastWriteTime)) {
- err = GetLastError();
- CloseHandle(h);
- goto fail;
- }
- DEBUG("Closing \"%ls\"", path);
- if (!CloseHandle(h)) {
- err = GetLastError();
- goto fail;
- }
- goto out;
-fail:
- /* Only warn if setting timestamps failed; still return 0. */
- WARNING("Can't set timestamps on \"%ls\"", path);
- win32_error(err);
-out:
return 0;
+
+error_close_handle:
+ err = GetLastError();
+ CloseHandle(h);
+ SetLastError(err);
+error:
+ set_errno_from_GetLastError();
+ return WIMLIB_ERR_SET_TIMESTAMPS;
}
+const struct apply_operations win32_apply_ops = {
+ .name = L"Win32",
+
+ .target_is_root = win32_path_is_root_of_drive,
+ .start_extract = win32_start_extract,
+ .create_file = win32_create_file,
+ .create_directory = win32_create_directory,
+ .create_hardlink = win32_create_hardlink,
+ .create_symlink = win32_create_symlink,
+ .extract_unnamed_stream = win32_extract_unnamed_stream,
+ .extract_named_stream = win32_extract_named_stream,
+ .extract_encrypted_stream = win32_extract_encrypted_stream,
+ .set_file_attributes = win32_set_file_attributes,
+ .set_reparse_data = win32_set_reparse_data,
+ .set_short_name = win32_set_short_name,
+ .set_security_descriptor = win32_set_security_descriptor,
+ .set_timestamps = win32_set_timestamps,
+
+ .path_prefix = L"\\\\?\\",
+ .path_prefix_nchars = 4,
+ .path_separator = L'\\',
+ .path_max = 32768,
+
+ .requires_realtarget_in_paths = 1,
+ .realpath_works_on_nonexisting_files = 1,
+ .root_directory_is_special = 1,
+ .requires_final_set_attributes_pass = 1,
+ .extract_encrypted_stream_creates_file = 1,
+ .requires_short_name_reordering = 1, /* TODO: check if this is really needed */
+};
+
#endif /* __WIN32__ */