4 * External header for wimlib.
8 * Copyright (C) 2012 Eric Biggers
10 * This file is part of wimlib, a library for working with WIM files.
12 * wimlib is free software; you can redistribute it and/or modify it under the
13 * terms of the GNU Lesser General Public License as published by the Free
14 * Software Foundation; either version 2.1 of the License, or (at your option)
17 * wimlib is distributed in the hope that it will be useful, but WITHOUT ANY
18 * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
19 * A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
22 * You should have received a copy of the GNU Lesser General Public License
23 * along with wimlib; if not, see http://www.gnu.org/licenses/.
28 * \section intro Introduction
30 * wimlib is a C library to read, write, and mount archive files in the Windows
31 * Imaging Format (WIM files). These files are normally created using the @c
32 * imagex.exe utility on Windows, but this library provides a free
33 * implementetion of @c imagex for UNIX-based systems and an API to allow other
34 * programs to read, write, and mount WIM files. wimlib is comparable to
35 * Microsoft's WIMGAPI, but was designed independently and is not a clone of it.
37 * The main intended use of wimlib is to create customized images of Windows PE,
38 * the Windows Preinstallation Environment, without having to rely on Windows.
39 * Windows PE, which is the operating system that runs when you boot from the
40 * Windows Vista or Windows 7 DVD, is a lightweight version of Windows that can
41 * run entirely from memory. It can be used to install Windows from local media
42 * or a network drive or perform maintenance.
44 * You can find Windows PE on the installation media for Windows Vista, Windows
45 * 7, and Windows 8. The Windows PE image itself is a WIM file, @c
46 * sources/boot.wim, on the ISO filesystem. Windows PE can also be found in the
47 * Windows Automated Installation Kit (WAIK) inside the @c WinPE.cab file, which
48 * you can extract if you install the @c cabextract program.
50 * \section format WIM files
52 * A <b>Windows Imaging (WIM)</b> file is an archive. Like some other archive
53 * formats such as ZIP, files in WIM archives may be compressed. WIM archives
54 * support two Microsoft-specific compression formats: @b LZX and @b XPRESS.
55 * Both are based on LZ77 and Huffman encoding, and both are supported by
58 * Unlike ZIP files, WIM files can contain multiple independent toplevel
59 * directory trees known as @a images. While each image has its own metadata,
60 * files are not duplicated for each image; instead, each file is included only
61 * once in the entire WIM. Microsoft did this so that in one WIM file, they
62 * could do things like have 5 different versions of Windows that are almost
65 * WIM files may contain a integrity table. The integrity table, if it exists,
66 * is located at the end of the WIM file and contains SHA1 message digests of
67 * 10MB chunks of the WIM.
69 * Microsoft provides documentation for the WIM file format, XPRESS compression
70 * format, and LZX compression format. However, there are errors and omissions
71 * in some places in their documentation.
73 * \section starting Getting Started
75 * wimlib uses the GNU autotools, so it should be easy to install with
76 * <code>configure && make && sudo make install</code>, provided that you have
77 * @c libxml2 and @c libfuse installed. To use wimlib in a program after
78 * installing it, include @c wimlib.h and link your program with @c -lwim.
80 * wimlib wraps up a WIM file in an opaque ::WIMStruct structure.
82 * All functions in wimlib's public API are prefixed with @c wimlib. Most
83 * return an integer error code on failure. Use wimlib_get_error_string() to
84 * get a string that describes an error code. wimlib also can print error
85 * messages itself when an error happens, and these may be more informative than
86 * the error code; to enable this, call wimlib_set_print_errors().
88 * wimlib is thread-safe as long as different ::WIMStruct's are used, with the
89 * following exceptions: wimlib_set_print_errors() and
90 * wimlib_set_memory_allocator() apply globally, and wimlib_mount() can only be
91 * used by one ::WIMStruct at a time.
93 * To open an existing WIM, use wimlib_open_wim().
95 * To create a new WIM that initially contains no images, use
96 * wimlib_create_new_wim().
98 * To add an image to a WIM file from a directory tree on your filesystem, call
99 * wimlib_add_image(). This can be done with a ::WIMStruct gotten from
100 * wimlib_open_wim() or from wimlib_create_new_wim().
102 * To extract an image from a WIM file, call wimlib_set_output_dir() to set the
103 * output directory, then call wimlib_extract_image().
105 * wimlib supports mounting WIM files either read-only or read-write. Mounting
106 * is done using wimlib_mount() and unmounting is done using wimlib_unmount().
107 * Mounting can be done without root privileges because it is implemented using
108 * FUSE (Filesystem in Userspace). If wimlib is compiled with the
109 * <code>--without-fuse</code> flag, these functions will be available but will
112 * After creating or modifying a WIM file, you can write it to a file using
113 * wimlib_write(). Alternatively, if the WIM was originally read from a file,
114 * you can use wimlib_overwrite() to overwrite the original file. In some
115 * cases, wimlib_overwrite_xml_and_header() can be used instead.
117 * After you are done with the WIM file, use wimlib_free() to free all memory
118 * associated with a ::WIMStruct and close all files associated with it.
120 * To see an example of how to use wimlib, see the file
121 * @c programs/imagex.c in wimlib's source tree.
123 * wimlib supports custom memory allocators; use wimlib_set_memory_allocator()
126 * \section imagex imagex
128 * wimlib comes with the <b>imagex</b> program, which is documented in man pages.
130 * \section mkwinpeimg mkwinpeimg
132 * wimlib comes with the <b>mkwinpeimg</b> script, which is documented in a man
135 * \section Limitations
137 * While wimlib supports the main features of WIM files, wimlib currently has
138 * the following limitations:
139 * - wimlib does not support modifying or creating "security data", which
140 * describes the access rights of the files in the WIM. This data is very
141 * Windows-specific, and it would be difficult to do anything with it.
142 * Microsoft's software can still read a WIM without security data, including
143 * a boot.wim for Windows PE, but <b>do not expect to be able to use wimlib to
144 * image a Windows installation and preserve file attributes</b>. However, by
145 * default, wimlib will preserve security data for existing WIMs.
146 * - There is no way to directly extract or mount split WIMs.
147 * - There is not yet any code to verify that there are no collisions between
148 * different files that happen to have the same SHA1 message digest.
149 * This is extremely unlikely, but could result in something bad such as a
150 * file going missing.
151 * - Alternate stream entries for directory entries are ignored.
152 * - Different versions of the WIM file format, if they even exist, are
153 * unsupported. Let me know if you notice WIM files with a different version.
154 * - Chunk sizes other than 32768 are unsupported (except for uncompressed WIMs,
155 * for which the chunk size field is ignored). As far as I can tell, other
156 * chunk sizes are not used in compressed WIMs. Let me know if you find a WIM
157 * file with a different chunk size.
158 * - wimlib does not provide a clone of the @b PEImg tool that allows you to
159 * make certain Windows-specific modifications to a Windows PE image, such as
160 * adding a driver or Windows component. Such a tool could conceivably be
161 * implemented on top of wimlib, although it likely would be hard to implement
162 * because it would have to do very Windows-specific things such as
163 * manipulating the driver store. wimlib does provide the @b mkwinpeimg
164 * script for a similar purpose, however. With regards to adding drivers to
165 * Windows PE, you have the option of putting them anywhere in the Windows PE
166 * image, then loading them after boot using @b drvload.exe.
167 * - There is not yet a way to extract specific files or directories from a WIM
168 * file without mounting it, or to add, remove, or modify files in a WIM
169 * without mounting it, other than by adding or removing an entire image. I
170 * can implement this if requested, but I intend the FUSE mount feature to be
171 * used for this purpose, as it is easy to do these things in whatever way you
172 * want after the image is mounted.
174 * Currently, Microsoft's @a image.exe can create slightly smaller WIM files
175 * than wimlib when using maximum (LZX) compression because it knows how to
176 * split up LZX compressed blocks, which is not yet implemented in wimlib.
178 * wimlib is experimental and likely contains bugs; use Microsoft's @a
179 * imagex.exe if you want to make sure your WIM files are made "correctly".
181 * \section legal License
183 * The wimlib library is licensed under the GNU Lesser General Public License
184 * version 2.1 or later.
186 * @b imagex and @b mkwinpeiso are licensed under the GNU General Public License
187 * version 3 or later.
197 #ifndef _WIMLIB_INTERNAL_H
199 * Opaque structure that represents a WIM file.
201 typedef struct WIMStruct WIMStruct;
205 * Specifies the way in which identical files are linked when extracting
206 * image(s) from the WIM.
209 /** Hard link identical files when extracting files from the WIM. */
210 WIM_LINK_TYPE_HARD = 0,
211 /** Symbolic link identical files when extracting files from the WIM. */
212 WIM_LINK_TYPE_SYMBOLIC = 1,
213 /** Do not create links when extracting identical files from the WIM (default).
215 WIM_LINK_TYPE_NONE = 2,
219 * Specifies the compression type of a WIM file.
222 enum wim_compression_type {
223 /** An invalid compression type. */
224 WIM_COMPRESSION_TYPE_INVALID = -1,
226 /** The WIM does not include any compressed resources. */
227 WIM_COMPRESSION_TYPE_NONE = 0,
229 /** Compressed resources in the WIM use LZX compression. */
230 WIM_COMPRESSION_TYPE_LZX = 1,
232 /** Compressed resources in the WIM use XPRESS compression. */
233 WIM_COMPRESSION_TYPE_XPRESS = 2,
236 /** Mount the WIM read-write. */
237 #define WIMLIB_MOUNT_FLAG_READWRITE 0x1
239 /** For debugging only. (This passes the @c -d flag to @c fuse_main()).*/
240 #define WIMLIB_MOUNT_FLAG_DEBUG 0x2
242 /** Include an integrity table in the new WIM being written during the unmount.
243 * Ignored for read-only mounts. */
244 #define WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY 0x1
246 /** Unless this flag is given, changes to a mounted WIM are discarded. Ignored
247 * for read-only mounts. */
248 #define WIMLIB_UNMOUNT_FLAG_COMMIT 0x2
250 /** Include an integrity table in the new WIM file. */
251 #define WIMLIB_WRITE_FLAG_CHECK_INTEGRITY 0x1
253 /** Print progress information when writing the integrity table. */
254 #define WIMLIB_WRITE_FLAG_SHOW_PROGRESS 0x2
256 /** Mark the image being added as the bootable image of the WIM. */
257 #define WIMLIB_ADD_IMAGE_FLAG_BOOT 0x1
259 /** See documentation for wimlib_export_image(). */
260 #define WIMLIB_EXPORT_FLAG_BOOT 0x1
262 /** Verify the integrity of the WIM if an integrity table is present. */
263 #define WIMLIB_OPEN_FLAG_CHECK_INTEGRITY 0x1
265 /** Print progress information when verifying integrity table. */
266 #define WIMLIB_OPEN_FLAG_SHOW_PROGRESS 0x2
268 /** If this flag is not given, an error is issued if the WIM is part of a split
270 #define WIMLIB_OPEN_FLAG_SPLIT_OK 0x4
273 * Possible values of the error code returned by many functions in wimlib.
275 * See the documentation for each wimlib function to see specifically what error
276 * codes can be returned by a given function, and what they mean.
278 enum wimlib_error_code {
279 WIMLIB_ERR_SUCCESS = 0,
280 WIMLIB_ERR_COMPRESSED_LOOKUP_TABLE,
281 WIMLIB_ERR_DECOMPRESSION,
282 WIMLIB_ERR_DELETE_STAGING_DIR,
285 WIMLIB_ERR_FUSERMOUNT,
286 WIMLIB_ERR_IMAGE_COUNT,
287 WIMLIB_ERR_IMAGE_NAME_COLLISION,
288 WIMLIB_ERR_INTEGRITY,
289 WIMLIB_ERR_INVALID_CHUNK_SIZE,
290 WIMLIB_ERR_INVALID_COMPRESSION_TYPE,
291 WIMLIB_ERR_INVALID_DENTRY,
292 WIMLIB_ERR_INVALID_HEADER_SIZE,
293 WIMLIB_ERR_INVALID_IMAGE,
294 WIMLIB_ERR_INVALID_INTEGRITY_TABLE,
295 WIMLIB_ERR_INVALID_PARAM,
296 WIMLIB_ERR_INVALID_RESOURCE_SIZE,
297 WIMLIB_ERR_INVALID_SECURITY_DATA,
303 WIMLIB_ERR_NOT_A_WIM_FILE,
304 WIMLIB_ERR_NO_FILENAME,
309 WIMLIB_ERR_SPLIT_INVALID,
310 WIMLIB_ERR_SPLIT_UNSUPPORTED,
313 WIMLIB_ERR_UNKNOWN_VERSION,
314 WIMLIB_ERR_UNSUPPORTED,
320 /** Used to indicate that no WIM image is currently selected. */
321 #define WIM_NO_IMAGE 0
323 /** Used to specify all images in the WIM. */
324 #define WIM_ALL_IMAGES (-1)
328 * Adds an image to a WIM file from a directory tree on disk.
330 * The directory tree is read immediately for the purpose of constructing a
331 * directory entry tree in-memory. Also, all files are read to calculate their
332 * SHA1 message digests. However, because the directory tree may contain a very
333 * large amount of data, the files themselves are not read into memory
334 * permanently, and instead references to their paths saved. This means that
335 * the directory tree must not be modified, other than by adding entirely new
336 * files or directories, before executing a call to wimlib_write() or
337 * wimlib_overwrite(). Otherwise, wimlib_write() may fail or incorrect files may
338 * be included in the WIM written by wimlib_write().
341 * Pointer to the ::WIMStruct for a WIM file to which the image will be
344 * A path to a directory in the outside filesystem. It will become the
345 * root directory for the WIM image.
347 * The name to give the image. This must be non-@c NULL.
349 * The description to give the image. This parameter may be left @c
350 * NULL, in which case no description is given to the image.
351 * @param flags_element
352 * What to put in the <FLAGS> element for the image's XML data. This
353 * parameter may be left @c NULL, in which case no <FLAGS> element is
354 * given to the image.
356 * If set to ::WIMLIB_ADD_IMAGE_FLAG_BOOT, change the image in @a wim
357 * marked as bootable to the one being added. Otherwise, leave the boot
360 * @return 0 on success; nonzero on error.
361 * @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
362 * There is already an image named @a name in @a w.
363 * @retval ::WIMLIB_ERR_INVALID_PARAM
364 * @a dir was @c NULL, @a name was @c NULL, or @a name was the empty string.
365 * @retval ::WIMLIB_ERR_NOMEM
366 * Failed to allocate needed memory.
367 * @retval ::WIMLIB_ERR_NOTDIR
368 * @a dir is not a directory.
369 * @retval ::WIMLIB_ERR_OPEN
370 * Failed to open a file or directory in the directory tree rooted at @a
372 * @retval ::WIMLIB_ERR_READ
373 * Failed to read a file in the directory tree rooted at @a dir.
374 * @retval ::WIMLIB_ERR_STAT
375 * Failed obtain the metadata for a file or directory in the directory tree
379 extern int wimlib_add_image(WIMStruct *wim, const char *dir,
380 const char *name, const char *description,
381 const char *flags_element, int flags);
384 * Creates a WIMStruct for a new WIM file.
387 * The type of compression to be used in the new WIM file. Must be
388 * ::WIM_COMPRESSION_TYPE_NONE, ::WIM_COMPRESSION_TYPE_LZX, or
389 * ::WIM_COMPRESSION_TYPE_XPRESS.
391 * On success, a pointer to an opaque ::WIMStruct for the new WIM file is
392 * written to the memory location pointed to by this paramater. The
393 * ::WIMStruct must be freed using using wimlib_free() when finished with
395 * @return 0 on success; nonzero on error.
396 * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
397 * @a ctype was not ::WIM_COMPRESSION_TYPE_NONE,
398 * ::WIM_COMPRESSION_TYPE_LZX, or ::WIM_COMPRESSION_TYPE_XPRESS.
399 * @retval ::WIMLIB_ERR_NOMEM
400 * Failed to allocate needed memory.
402 extern int wimlib_create_new_wim(int ctype, WIMStruct **wim_ret);
405 * Deletes an image, or all images, from a WIM file.
407 * All file resources referenced by the image(s) being deleted are removed from
408 * the WIM if they are not referenced by any other images in the WIM.
411 * Pointer to the ::WIMStruct for the WIM file that contains the image(s)
414 * The number of the image to delete, or ::WIM_ALL_IMAGES to delete all
416 * @return 0 on success; nonzero on error.
417 * @retval ::WIMLIB_ERR_DECOMPRESSION
418 * Could not decompress the metadata resource for @a image.
419 * @retval ::WIMLIB_ERR_INVALID_DENTRY
420 * A directory entry in the metadata resource for @a image in the WIM is
422 * @retval ::WIMLIB_ERR_INVALID_IMAGE
423 * @a image does not exist in the WIM and is not ::WIM_ALL_IMAGES.
424 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
425 * The metadata resource for @a image in the WIM is invalid.
426 * @retval ::WIMLIB_ERR_NOMEM Failed to allocate needed memory.
427 * @retval ::WIMLIB_ERR_READ
428 * Could not read the metadata resource for @a image from the WIM.
430 extern int wimlib_delete_image(WIMStruct *wim, int image);
433 * Copies an image, or all the images, from a WIM file, into another WIM file.
436 * Pointer to the ::WIMStruct for a WIM file that contains the image(s)
439 * The image to export from @a src_wim. Can be the number of an image, or
440 * ::WIM_ALL_IMAGES to export all images.
442 * Pointer to the ::WIMStruct for a WIM filethat will receive the images being
445 * The name to give the exported image in the new WIM file. If left @c NULL,
446 * the name from @a src_wim is used. This parameter must be left @c NULL
447 * if @a src_image is ::WIM_ALL_IMAGES and @a src_wim contains more than one
448 * image; in that case, the names are all taken from the @a src_wim.
449 * @param dest_description
450 * The description to give the exported image in the new WIM file. If left
451 * @c NULL, the description from the @a src_wim is used. This parameter must
452 * be left @c NULL if @a src_image is ::WIM_ALL_IMAGES and @a src_wim contains
453 * more than one image; in that case, the descriptions are all taken from
456 * ::WIMLIB_EXPORT_FLAG_BOOT if the image being exported is to be made
457 * bootable, or 0 if which image is marked as bootable in the destination
458 * WIM is to be left unchanged. If @a src_image is ::WIM_ALL_IMAGES and
459 * there are multiple images in @a src_wim, specifying
460 * ::WIMLIB_EXPORT_FLAG_BOOT is valid only if one of the exported images is
461 * currently marked as bootable in @a src_wim; if that is the case, then
462 * that image is marked as bootable in the destination WIM.
464 * @return 0 on success; nonzero on error.
465 * @retval ::WIMLIB_ERR_DECOMPRESSION
466 * Could not decompress the metadata resource for @a src_image
468 * @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
469 * One or more of the names being given to an exported image was already in
470 * use in the destination WIM.
471 * @retval ::WIMLIB_ERR_INVALID_DENTRY
472 * A directory entry in the metadata resource for @a src_image in @a
473 * src_wim is invalid.
474 * @retval ::WIMLIB_ERR_INVALID_IMAGE
475 * @a src_image does not exist in @a src_wim.
476 * @retval ::WIMLIB_ERR_INVALID_PARAM
477 * ::WIMLIB_EXPORT_FLAG_BOOT was specified in @a flags, @a src_image was
478 * ::WIM_ALL_IMAGES, @a src_wim contains multiple images, and no images in
479 * @a src_wim are marked as bootable; or @a dest_name and/or @a
480 * dest_description were non-<code>NULL</code>, @a src_image was
481 * ::WIM_ALL_IMAGES, and @a src_wim contains multiple images.
482 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
483 * The metadata resource for @a src_image in @a src_wim is invalid.
484 * @retval ::WIMLIB_ERR_NOMEM
485 * Failed to allocate needed memory.
486 * @retval ::WIMLIB_ERR_READ
487 * Could not read the metadata resource for @a src_image from @a src_wim.
489 extern int wimlib_export_image(WIMStruct *src_wim, int src_image,
490 WIMStruct *dest_wim, const char *dest_name,
491 const char *dest_description, int flags);
494 * Extracts an image, or all images, from a WIM file.
496 * The output directory must have been previously set with
497 * wimlib_set_output_dir().
499 * The link type used for extracted files is that specified by a previous call
500 * to wimlib_set_link_type(), or ::WIM_LINK_TYPE_NONE by default.
503 * Pointer to the ::WIMStruct for a WIM file.
505 * The image to extract. Can be the number of an image, or ::WIM_ALL_IMAGES
506 * to specify that all images are to be extracted.
508 * @return 0 on success; nonzero on error.
509 * @retval ::WIMLIB_ERR_DECOMPRESSION
510 * Could not decompress a resource (file or metadata) for @a image in @a
512 * @retval ::WIMLIB_ERR_INVALID_DENTRY
513 * A directory entry in the metadata resource for @a image in @a wim is
515 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
516 * A resource (file or metadata) for @a image in @a wim is invalid.
517 * @retval ::WIMLIB_ERR_LINK
518 * Failed to create a symbolic link or a hard link.
519 * @retval ::WIMLIB_ERR_MKDIR
520 * Failed create a needed directory.
521 * @retval ::WIMLIB_ERR_NOMEM
522 * Failed to allocate needed memory.
523 * @retval ::WIMLIB_ERR_NOTDIR
524 * wimlib_set_output_dir() has not been successfully called on @a wim.
525 * @retval ::WIMLIB_ERR_OPEN
526 * Could not open one of the files being extracted for writing.
527 * @retval ::WIMLIB_ERR_READ
528 * A unexpected end-of-file or read error occurred when trying to read data
529 * from the WIM file associated with @a wim.
530 * @retval ::WIMLIB_ERR_WRITE
531 * Failed to write a file being extracted.
533 extern int wimlib_extract_image(WIMStruct *wim, int image);
536 * Extracts the XML data for a WIM file to a file stream. Every WIM file
537 * includes a string of XML that describes the images contained in the WIM.
540 * Pointer to the ::WIMStruct for a WIM file.
542 * @c stdout, or a FILE* opened for writing, to extract the data to.
544 * @return 0 on success; nonzero on error.
545 * @retval ::WIMLIB_ERR_WRITE
546 * Failed to completely write the XML data to @a fp.
548 extern int wimlib_extract_xml_data(WIMStruct *wim, FILE *fp);
551 * Frees all memory allocated for a WIMStruct and closes all files associated
555 * Pointer to the ::WIMStruct for a WIM file.
557 * @return This function has no return value.
559 extern void wimlib_free(WIMStruct *wim);
562 * Finds which image in a WIM is bootable.
565 * Pointer to the ::WIMStruct for a WIM file.
568 * 0 if no image is marked as bootable, or the number of the image marked
569 * as bootable (numbered starting at 1).
571 extern int wimlib_get_boot_idx(const WIMStruct *wim);
574 * Gets the compression type used in the WIM.
577 * Pointer to the ::WIMStruct for a WIM file
580 * ::WIM_COMPRESSION_TYPE_NONE, ::WIM_COMPRESSION_TYPE_LZX, or
581 * ::WIM_COMPRESSION_TYPE_XPRESS.
583 extern int wimlib_get_compression_type(const WIMStruct *wim);
586 * Converts a compression type enumeration value into a string.
589 * ::WIM_COMPRESSION_TYPE_NONE, ::WIM_COMPRESSION_TYPE_LZX,
590 * ::WIM_COMPRESSION_TYPE_XPRESS, or another value.
593 * A statically allocated string: "None", "LZX", "XPRESS", or "Invalid",
596 extern const char *wimlib_get_compression_type_string(int ctype);
599 * Converts an error code into a string describing it.
602 * The error code returned by one of wimlib's functions.
605 * Pointer to a statically allocated string describing the error code,
606 * or @c NULL if the error code is not valid.
608 extern const char *wimlib_get_error_string(enum wimlib_error_code code);
611 * Returns the description of the specified image.
614 * Pointer to the ::WIMStruct for a WIM file.
616 * The number of the image, numbered starting at 1.
619 * The description of the image, or @c NULL if there is no such image, or @c NULL
620 * if the specified image has no description.
622 extern const char *wimlib_get_image_description(const WIMStruct *wim, int image);
625 * Returns the name of the specified image.
628 * Pointer to the ::WIMStruct for a WIM file.
630 * The number of the image, numbered starting at 1.
633 * The name of the image, or @c NULL if there is no such image.
635 extern const char *wimlib_get_image_name(const WIMStruct *wim, int image);
639 * Gets the number of images contained in the WIM.
642 * Pointer to the ::WIMStruct for a WIM file.
645 * The number of images contained in the WIM file.
647 extern int wimlib_get_num_images(const WIMStruct *wim);
650 * Gets the part number of the wim (in a split WIM).
653 * Pointer to the ::WIMStruct for a WIM file.
654 * @param total_parts_ret
655 * If non-@c NULL, the total number of parts in the split WIM (1 for
656 * non-split WIMs) is written to this location.
659 * The part number of the WIM (1 for non-split WIMs)
661 extern int wimlib_get_part_number(const WIMStruct *wim, int *total_parts_ret);
664 * Returns true if the WIM has an integrity table.
667 * Pointer to the ::WIMStruct for a WIM file.
669 * @c true if the WIM has an integrity table; false otherwise.
671 extern bool wimlib_has_integrity_table(const WIMStruct *wim);
675 * Determines if an image name is already used by some image in the WIM.
678 * Pointer to the ::WIMStruct for a WIM file.
683 * @c true if there is already an image in @a wim named @a name; @c
684 * false if there is no image named @a name in @a wim.
686 extern bool wimlib_image_name_in_use(const WIMStruct *wim, const char *name);
689 * Joins a set of split WIMs into a one-part WIM.
692 * An array of strings that give the filenames of all parts of the split
695 * Number of filenames in @a swms.
697 * The path to write the one-part WIM to.
699 * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY to check the split WIMs' integrity
700 * tables (if present) when opening them, and include an integrity table in
703 * @return 0 on success; nonzero on error. This function may return any value
704 * returned by wimlib_open_wim() except ::WIMLIB_ERR_SPLIT_UNSUPPORTED, as well
705 * as the following error codes:
707 * @retval ::WIMLIB_ERR_SPLIT_INVALID
708 * The split WIMs do not form a valid WIM because they do not include all
709 * the parts of the original WIM, there are duplicate parts, or not all the
710 * parts have the same GUID and compression type.
711 * @retval ::WIMLIB_ERR_WRITE
712 * An error occurred when trying to write data to the new WIM at @a output_path.
714 * Note that this function merely copies the resources, so it will not check to
715 * see if the resources, including the metadata resource, are valid or not.
717 extern int wimlib_join(const char **swms, int num_swms,
718 const char *output_path, int flags);
721 * Mounts an image in a WIM file on a directory read-only or read-write.
723 * A daemon will be forked to service the filesystem.
725 * If the mount is read-write, modifications to the WIM are staged in a staging
728 * wimlib_mount() currently cannot be used with multiple ::WIMStruct's without
729 * intervening wimlib_unmount()s. If there was a way to have libfuse pass a
730 * pointer to user data to each FUSE callback, then this would be possible, but
731 * there doesn't seem to be a way to do this currently.
734 * Pointer to the ::WIMStruct for the WIM file to be mounted.
736 * The number of the image to mount, numbered from 1. It must be an
737 * existing, single image.
739 * The path to an existing directory to mount the image on.
741 * Bitwise OR of the flags ::WIMLIB_MOUNT_FLAG_READWRITE or
742 * ::WIMLIB_MOUNT_FLAG_DEBUG. If ::WIMLIB_MOUNT_FLAG_READWRITE is not
743 * given, the WIM is mounted read-only.
745 * @return 0 on success; nonzero on error.
746 * @retval ::WIMLIB_ERR_DECOMPRESSION
747 * Could not decompress the metadata resource for @a image in @a wim.
748 * @retval ::WIMLIB_ERR_FUSE
749 * A non-zero status was returned by @c fuse_main().
750 * @retval ::WIMLIB_ERR_INVALID_DENTRY
751 * A directory entry in the metadata resource for @a image in @a wim is
753 * @retval ::WIMLIB_ERR_INVALID_IMAGE
754 * @a image does not specify an existing, single image in @a wim.
755 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
756 * The metadata resource for @a image in @a wim is invalid.
757 * @retval ::WIMLIB_ERR_MKDIR
758 * ::WIMLIB_MOUNT_FLAG_READWRITE was specified in @a flags, but the staging
759 * directory could not be created.
760 * @retval ::WIMLIB_ERR_NOMEM
761 * Failed to allocate needed memory.
762 * @retval ::WIMLIB_ERR_NOTDIR
763 * Could not determine the current working directory.
764 * @retval ::WIMLIB_ERR_READ
765 * An unexpected end-of-file or read error occurred when trying to read
766 * data from the WIM file associated with @a wim.
769 extern int wimlib_mount(WIMStruct *wim, int image, const char *dir, int flags);
772 * Opens a WIM file and creates a ::WIMStruct for it.
775 * The path to the WIM file to open.
777 * Bitwise OR of ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY and/or
778 * ::WIMLIB_OPEN_FLAG_SHOW_PROGRESS.
779 * If ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY is given, the integrity table
780 * of the WIM, if it exists, is checked, and the function will fail with an
781 * ::WIMLIB_ERR_INTEGRITY status if any of the computed SHA1 message
782 * digests of the WIM do not exactly match the corresponding message
783 * digests given in the integrity table.
784 * If ::WIMLIB_OPEN_FLAG_SHOW_PROGRESS is given, progress information will
785 * be shown if the integrity of the WIM is checked.
786 * If ::WIMLIB_OPEN_FLAG_SPLIT_OK is given, no error will be issued if the
787 * WIM is part of a split WIM. However, wimlib does not fully support
788 * split WIMs, so not all functions will work correctly after opening a
789 * split WIM. For example, you cannot use wimlib_mount() or
790 * wimlib_extract_image() on a split WIM.
793 * On success, a pointer to an opaque ::WIMStruct for the opened WIM file
794 * is written to the memory location pointed to by this parameter. The
795 * ::WIMStruct must be freed using using wimlib_free() when finished with
798 * @return 0 on success; nonzero on error.
799 * @retval ::WIMLIB_ERR_COMPRESSED_LOOKUP_TABLE
800 * The lookup table of @a wim_file is compressed. Support for this can be
801 * added to wimlib if needed, but it appears to be the case that the lookup
802 * table is never compressed.
803 * @retval ::WIMLIB_ERR_IMAGE_COUNT
804 * The WIM is not the non-first part of a split WIM, and the number of
805 * metadata resources found in the WIM did not match the image count given
806 * in the WIM header, or the number of <IMAGE> elements in the XML
807 * data for the WIM did not match the image count given in the WIM header.
808 * @retval ::WIMLIB_ERR_INTEGRITY
809 * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @a flags and @a
810 * wim_file contains an integrity table, but the SHA1 message digest for a
811 * chunk of the WIM does not match the corresponding message digest given
812 * in the integrity table.
813 * @retval ::WIMLIB_ERR_INVALID_CHUNK_SIZE
814 * Resources in @a wim_file are compressed, but the chunk size is not 32768.
815 * @retval ::WIMLIB_ERR_INVALID_COMPRESSION_TYPE
816 * The header of @a wim_file says that resources in the WIM are compressed,
817 * but the header flag indicating LZX or XPRESS compression is not set.
818 * @retval ::WIMLIB_ERR_INVALID_HEADER_SIZE
819 * The length field of the WIM header is not 208.
820 * @retval ::WIMLIB_ERR_INVALID_INTEGRITY_TABLE
821 * ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY was specified in @a flags and @a
822 * wim_file contains an integrity table, but the integrity table is
824 * @retval ::WIMLIB_ERR_NOMEM
825 * Failed to allocated needed memory.
826 * @retval ::WIMLIB_ERR_NOT_A_WIM_FILE
827 * @a wim_file does not begin with the expected magic characters.
828 * @retval ::WIMLIB_ERR_OPEN
829 * Failed to open the file @a wim_file for reading.
830 * @retval ::WIMLIB_ERR_READ
831 * An unexpected end-of-file or read error occurred when trying to read
832 * data from @a wim_file.
833 * @retval ::WIMLIB_ERR_SPLIT_UNSUPPORTED
834 * @a wim_file is a split WIM, but ::WIMLIB_OPEN_FLAG_SPLIT_OK was not
836 * @retval ::WIMLIB_ERR_UNKNOWN_VERSION
837 * A number other than 0x10d00 is written in the version field of the WIM
838 * header of @a wim_file.
839 * @retval ::WIMLIB_ERR_XML
840 * The XML data for @a wim_file is invalid.
842 extern int wimlib_open_wim(const char *wim_file, int flags,
843 WIMStruct **wim_ret);
846 * Overwrites the file that the WIM was originally read from, with changes made.
848 * The new WIM is written to a temporary file and then renamed to the original
849 * file after it is has been completely written. The temporary file currently
850 * is made in the same directory as the original WIM file.
852 * Note that it is not possible for this function to delete the original file
853 * before having written the new file because it is very likely that file
854 * resources in the new WIM file need to be retrieved from the old WIM file.
856 * After this function returns, @a wim must be freed using wimlib_free(). Any
857 * further actions on @a wim before doing this are undefined.
860 * Pointer to the ::WIMStruct for the WIM file to write. There may have
861 * been in-memory changes made to it, which are then reflected in the
864 * Bitwise OR of ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY and/or
865 * ::WIMLIB_WRITE_FLAG_SHOW_PROGRESS.
867 * @return 0 on success; nonzero on error. This function may return any value
868 * returned by wimlib_write() as well as the following error codes:
869 * @retval ::WIMLIB_ERR_NO_FILENAME
870 * @a wim corresponds to a WIM created with wimlib_create_new_wim() rather
871 * than a WIM read with wimlib_open_wim().
872 * @retval ::WIMLIB_ERR_RENAME
873 * The temporary file that the WIM was written to could not be renamed to
874 * the original filename of @a wim.
876 extern int wimlib_overwrite(WIMStruct *wim, int flags);
879 * Updates the header and XML data of the WIM file, without the need to write
880 * out the entire WIM to a temporary file as in wimlib_write().
882 * This function must only be used if no files, directories, or images have been
883 * added, removed, or changed in the WIM. It must be used when only the boot
884 * index or the name or description of image(s) has been changed.
886 * After this function returns, @a wim must be freed using wimlib_free(). Any
887 * further actions on @a wim before doing this are undefined.
890 * Pointer to the ::WIMStruct for the WIM file to overwrite.
892 * Bitwise OR of ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY and/or
893 * ::WIMLIB_WRITE_FLAG_SHOW_PROGRESS.
895 * @return 0 on success; nonzero on error.
897 * @retval ::WIMLIB_ERR_NO_FILENAME
898 * @a wim corresponds to a WIM created with wimlib_create_new_wim() rather
899 * than a WIM read with wimlib_open_wim().
900 * @retval ::WIMLIB_ERR_NOMEM
901 * Failed to allocate needed memory.
902 * @retval ::WIMLIB_ERR_OPEN
903 * The WIM file associated with @a wim could not be re-opened read-write.
904 * @retval ::WIMLIB_ERR_READ
905 * ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY was specified in @a flags, but data
906 * from the WIM file associated with @a wim could not be read to compute
907 * the SHA1 message digests, or the old integrity table (if it existed)
909 * @retval ::WIMLIB_ERR_WRITE
910 * Failed to write the WIM header, the XML data, or the integrity table to
911 * the WIM file associated with @a wim.
913 extern int wimlib_overwrite_xml_and_header(WIMStruct *wim, int flags);
916 * Prints information about one image, or all images, contained in a WIM.
919 * Pointer to the ::WIMStruct for a WIM file.
921 * The image about which to print information. Can be the number of an
922 * image, or ::WIM_ALL_IMAGES to print information about all images in the
925 * @return This function has no return value.
927 extern void wimlib_print_available_images(const WIMStruct *wim, int image);
930 * Prints the full paths to all files contained in an image, or all images, in a
934 * Pointer to the ::WIMStruct for a WIM file.
936 * Which image to print files for. Can be the number of an image, or
937 * ::WIM_ALL_IMAGES to print the files contained in all images.
939 * @return 0 on success; nonzero on error.
940 * @retval ::WIMLIB_ERR_DECOMPRESSION
941 * The metadata resource for one of the specified images could not be
943 * @retval ::WIMLIB_ERR_INVALID_DENTRY
944 * A directory entry in the metadata resource for one of the specified
946 * @retval ::WIMLIB_ERR_INVALID_IMAGE
947 * @a image does not specify a valid image in @a wim, and is not
949 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
950 * The metadata resource for one of the specified images is invalid.
951 * @retval ::WIMLIB_ERR_NOMEM
952 * Failed to allocate needed memory.
953 * @retval ::WIMLIB_ERR_READ
954 * An unexpected read error or end-of-file occurred when reading the
955 * metadata resource for one of the specified images.
957 extern int wimlib_print_files(WIMStruct *wim, int image);
960 * Prints detailed information from the header of a WIM file.
963 * Pointer to the ::WIMStruct for a WIM file.
965 * @return This function has no return value.
968 extern void wimlib_print_header(const WIMStruct *wim);
971 * Prints the lookup table of a WIM file. The lookup table maps SHA1 message
972 * digests, as found in the directory entry tree in the WIM file, to file
973 * resources in the WIM file. This table includes one entry for each unique
974 * file in the WIM, so it can be quite long. There is only one lookup table per
978 * Pointer to the ::WIMStruct for a WIM file.
980 * @return This function has no return value.
982 extern void wimlib_print_lookup_table(WIMStruct *wim);
985 * Prints the metadata of the specified image in a WIM file. The metadata
986 * consists of the security data as well as the directory entry tree, and each
987 * image has its own metadata.
990 * Pointer to the ::WIMStruct for a WIM file.
992 * Which image to print the metadata for. Can be the number of an image,
993 * or ::WIM_ALL_IMAGES to print the metadata for all images in the WIM.
995 * @return 0 on success; nonzero on error.
996 * @retval ::WIMLIB_ERR_DECOMPRESSION
997 * The metadata resource for one of the specified images could not be
999 * @retval ::WIMLIB_ERR_INVALID_DENTRY
1000 * A directory entry in the metadata resource for one of the specified
1001 * images is invaled.
1002 * @retval ::WIMLIB_ERR_INVALID_IMAGE
1003 * @a image does not specify a valid image in @a wim, and is not
1005 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
1006 * The metadata resource for one of the specified images is invalid.
1007 * @retval ::WIMLIB_ERR_NOMEM
1008 * Failed to allocate needed memory.
1009 * @retval ::WIMLIB_ERR_READ
1010 * An unexpected read error or end-of-file occurred when reading the
1011 * metadata resource for one of the specified images.
1013 extern int wimlib_print_metadata(WIMStruct *wim, int image);
1016 * Prints some basic information about a WIM file. All information printed by
1017 * this function is also printed by wimlib_print_header(), but
1018 * wimlib_print_wim_information() prints some of this information more concisely
1019 * and in a more readable form.
1022 * Pointer to the ::WIMStruct for a WIM file.
1024 * @return This function has no return value.
1026 extern void wimlib_print_wim_information(const WIMStruct *wim);
1029 * Translates a string specifying the name or number of an image in the WIM into
1030 * the number of the image. The images are numbered starting at 1.
1033 * Pointer to the ::WIMStruct for a WIM file.
1034 * @param image_name_or_num
1035 * A string specifying which image. If it begins with a number, it is
1036 * taken to be a string specifying the image number. Otherwise, it is
1037 * taken to be the name of an image, as specified in the XML data for the
1038 * WIM file. It also may be the keyword "all", which will resolve to
1042 * If the string resolved to a single existing image, the number of that
1043 * image, counting starting at 1, is returned. If the keyword "all" was
1044 * specified, ::WIM_ALL_IMAGES is returned. Otherwise, ::WIM_NO_IMAGE is
1047 extern int wimlib_resolve_image(WIMStruct *wim, const char *image_name_or_num);
1050 * Sets which image in the WIM is marked as bootable.
1053 * Pointer to the ::WIMStruct for a WIM file.
1055 * The number of the image to mark as bootable, or 0 to mark no image as
1057 * @return 0 on success; nonzero on error.
1058 * @retval ::WIMLIB_ERR_INVALID_IMAGE
1059 * @a boot_idx does not specify an existing image in @a wim, and it was not
1062 extern int wimlib_set_boot_idx(WIMStruct *wim, int boot_idx);
1065 * Changes the description of an image in the WIM.
1068 * Pointer to the ::WIMStruct for a WIM file.
1070 * The number of the image for which to change the description.
1071 * @param description
1072 * The new description to give the image. It may be @c NULL, which
1073 * indicates that the image is to be given no description.
1075 * @return 0 on success; nonzero on error.
1076 * @retval ::WIMLIB_ERR_INVALID_IMAGE
1077 * @a image does not specify a single existing image in @a wim.
1078 * @retval ::WIMLIB_ERR_NOMEM
1079 * Failed to allocate the memory needed to duplicate the @a description
1082 extern int wimlib_set_image_descripton(WIMStruct *wim, int image,
1083 const char *description);
1086 * Changes the name of an image in the WIM.
1089 * Pointer to the ::WIMStruct for a WIM file.
1091 * The number of the image for which to change the name.
1093 * The new name to give the image. It must not be @c NULL.
1095 * @return 0 on success; nonzero on error.
1096 * @retval ::WIMLIB_ERR_IMAGE_NAME_COLLISION
1097 * There is already an image named @a name in @a wim.
1098 * @retval ::WIMLIB_ERR_INVALID_PARAM
1099 * @a name was @c NULL or the empty string.
1100 * @retval ::WIMLIB_ERR_INVALID_IMAGE
1101 * @a image does not specify a single existing image in @a wim.
1102 * @retval ::WIMLIB_ERR_NOMEM
1103 * Failed to allocate the memory needed to duplicate the @a name string.
1105 extern int wimlib_set_image_name(WIMStruct *wim, int image, const char *name);
1108 * Sets the link type to use when extracting files from a WIM. This applies
1109 * when extracting one image as well as when extracting all images. Cross-image
1110 * links may save a lot of space because it is common for files to be referenced
1111 * multiple times in WIM files. By default, the link type used for extraction
1112 * is ::WIM_LINK_TYPE_NONE, meaning that links are not created.
1115 * Pointer to the ::WIMStruct for a WIM file
1117 * ::WIM_LINK_TYPE_NONE, ::WIM_LINK_TYPE_SYMBOLIC, or ::WIM_LINK_TYPE_HARD.
1119 * @return 0 on success; nonzero on error.
1120 * @retval ::WIMLIB_ERR_INVALID_PARAM
1121 * @a link_type was not ::WIM_LINK_TYPE_NONE, ::WIM_LINK_TYPE_SYMBOLIC,
1122 * or ::WIM_LINK_TYPE_HARD.
1124 extern int wimlib_set_link_type(WIMStruct *wim, int link_type);
1127 * Set the functions that wimlib uses to allocate and free memory.
1129 * These settings are global and not per-WIM.
1131 * The default is to use the default @c malloc() and @c free() from the C
1134 * @param malloc_func
1135 * A function equivalent to @c malloc() that wimlib will use to allocate
1136 * memory. If @c NULL, the allocator function is set back to the default
1137 * @c malloc() from the C library.
1139 * A function equivalent to @c free() that wimlib will use to free memory.
1140 * If @c NULL, the free function is set back to the default @c free() from
1142 * @param realloc_func
1143 * A function equivalent to @c realloc() that wimlib will use to reallocate
1144 * memory. If @c NULL, the free function is set back to the default @c
1145 * realloc() from the C library.
1146 * @return 0 on success; nonzero on error.
1147 * @retval ::WIMLIB_ERR_UNSUPPORTED
1148 * wimlib was compiled with the @c --without-custom-memory-allocator flag,
1149 * so custom memory allocators are unsupported.
1151 int wimlib_set_memory_allocator(void *(*malloc_func)(size_t),
1152 void (*free_func)(void *),
1153 void *(*realloc_func)(void *, size_t));
1156 * Sets whether wimlib is to print error messages to @c stderr when a function
1157 * fails or not. These error messages may provide information that cannot be
1158 * determined only from the error code that is returned.
1160 * This setting is global and not per-WIM.
1162 * By default, error messages are not printed.
1164 * @param show_messages
1165 * @c true if error messages are to be printed; @c false if error messages
1166 * are not to be printed.
1168 * @return 0 on success; nonzero on error.
1169 * @retval ::WIMLIB_ERR_UNSUPPORTED
1170 * @a show_messages was @c true, but wimlib was compiled with the @c
1171 * --without-error-messages option. Therefore, error messages cannot be
1174 extern int wimlib_set_print_errors(bool show_messages);
1177 * Sets whether wimlib is to be verbose when extracting files from a WIM or when
1178 * creating an image from a directory (i.e. whether it will print all affected
1179 * files or not.) This is a per-WIM parameter.
1182 * Pointer to the ::WIMStruct for the WIM file.
1184 * Whether wimlib is to be verbose when extracting files from @a wim using
1185 * wimlib_extract_image() or when adding an image to @a wim using
1186 * wimlib_add_image().
1188 * @return This function has no return value.
1190 extern void wimlib_set_verbose(WIMStruct *wim, bool verbose);
1193 * Sets and creates the directory to which files are to be extracted when
1194 * extracting files from the WIM.
1197 * Pointer to the ::WIMStruct for the WIM file.
1199 * The name of the directory to extract files to.
1201 * @return 0 on success; nonzero on error.
1202 * @retval ::WIMLIB_ERR_INVALID_PARAM
1203 * @a dir was @c NULL.
1204 * @retval ::WIMLIB_ERR_MKDIR
1205 * @a dir does not already exist and it could not created.
1206 * @retval ::WIMLIB_ERR_NOMEM
1207 * Failed to allocate the memory needed to duplicate the @a dir string.
1209 extern int wimlib_set_output_dir(WIMStruct *wim, const char *dir);
1212 * Splits a WIM into multiple parts.
1215 * Name of the WIM file to split. It must be a standalone, one-part WIM.
1217 * Name of the SWM file to create. This will be the name of the first
1218 * part. The other parts will have the same name with 2, 3, 4, ..., etc.
1221 * The maximum size per part. It is not guaranteed that this will really
1222 * be the maximum size per part, because some file resources in the WIM may
1223 * be larger than this size, and the WIM file format provides no way to
1224 * split up file resources among multiple WIMs.
1226 * Bitwise OR of ::WIMLIB_OPEN_FLAG_CHECK_INTEGRITY and/or
1227 * ::WIMLIB_OPEN_FLAG_SHOW_PROGRESS.
1229 * @return 0 on success; nonzero on error. This function may return any value
1230 * returned by wimlib_open_wim() as well as the following error codes:
1232 * @retval ::WIMLIB_ERR_WRITE
1233 * An error occurred when trying to write data to one of the split WIMs.
1236 extern int wimlib_split(const char *wimfile, const char *swm_name,
1237 size_t part_size, int flags);
1240 * Unmounts a WIM image that was mounted using wimlib_mount().
1242 * Blocks until it is known whether the mount succeeded or failed.
1244 * To perform this operation, the process calling wimlib_unmount() communicates
1245 * with the process that had called wimlib_mount().
1247 * There is currently a design problem with this function because it is hard to
1248 * know whether the filesystem daemon is still working or whether it has
1249 * crashed, has been killed, or has reached an infinite loop. However, ideally
1250 * there should be no infinite loops or crashes in the code, so this wouldn't be
1251 * much of a problem. Currently, a timeout of 600 seconds (so long because WIMs
1252 * can be very large) is implemented so that this function will not wait forever
1253 * before returning failure.
1256 * The directory that the WIM image was mounted on.
1258 * Bitwise OR of the flags ::WIMLIB_UNMOUNT_FLAG_CHECK_INTEGRITY or
1259 * ::WIMLIB_UNMOUNT_FLAG_COMMIT. Neither of these flags affect read-only
1262 * @return 0 on success; nonzero on error.
1263 * @retval ::WIMLIB_ERR_DELETE_STAGING_DIR
1264 * The filesystem daemon was unable to remove the staging directory and the
1265 * temporary files that it contains.
1266 * @retval ::WIMLIB_ERR_FORK
1267 * Could not @c fork() the process.
1268 * @retval ::WIMLIB_ERR_FUSERMOUNT
1269 * The @b fusermount program could not be executed or exited with a failure
1271 * @retval ::WIMLIB_ERR_MQUEUE
1272 * Could not open a POSIX message queue to communicate with the filesystem
1273 * daemon servicing the mounted filesystem, could not send a message
1274 * through the queue, or could not receive a message through the queue.
1275 * @retval ::WIMLIB_ERR_NOMEM
1276 * Failed to allocate needed memory.
1277 * @retval ::WIMLIB_ERR_OPEN
1278 * The filesystem daemon could not open a temporary file for writing the
1280 * @retval ::WIMLIB_ERR_TIMEOUT
1281 * 600 seconds elapsed while waiting for the filesystem daemon to notify
1282 * the process of its exit status, so the WIM file probably was not written
1284 * @retval ::WIMLIB_ERR_READ
1285 * A read error occurred when the filesystem daemon tried to a file from
1286 * the staging directory
1287 * @retval ::WIMLIB_ERR_RENAME
1288 * The filesystem daemon failed to rename the newly written WIM file to the
1289 * original WIM file.
1290 * @retval ::WIMLIB_ERR_WRITE
1291 * A write error occurred when the filesystem daemon was writing to the new
1292 * WIM file, or the filesystem daemon was unable to flush changes that had
1293 * been made to files in the staging directory.
1295 extern int wimlib_unmount(const char *dir, int flags);
1298 * Writes the WIM to a file.
1301 * Pointer to the ::WIMStruct for a WIM file. There may have been
1302 * in-memory changes made to it, which are then reflected in the output
1305 * The path to the file to write the WIM to.
1307 * The image inside the WIM to write. Use ::WIM_ALL_IMAGES to include all
1310 * Bitwise OR of ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY and/or
1311 * ::WIMLIB_WRITE_FLAG_SHOW_PROGRESS. If
1312 * ::WIMLIB_WRITE_FLAG_CHECK_INTEGRITY is given, an integrity table is
1313 * included in the WIM being written. If ::WIMLIB_WRITE_FLAG_SHOW_PROGRESS
1314 * is given, the progress of the calculation of the integrity table is
1317 * @return 0 on success; nonzero on error.
1318 * @retval ::WIMLIB_ERR_DECOMPRESSION
1319 * Failed to decompress a metadata or file resource in @a wim.
1320 * @retval ::WIMLIB_ERR_INVALID_DENTRY
1321 * A directory entry in the metadata resource for @a image in @a wim is
1323 * @retval ::WIMLIB_ERR_INVALID_IMAGE
1324 * @a image does not specify a single existing image in @a wim, and is not
1326 * @retval ::WIMLIB_ERR_INVALID_RESOURCE_SIZE
1327 * The metadata resource for @a image in @a wim is invalid.
1328 * @retval ::WIMLIB_ERR_NOMEM
1329 * Failed to allocate needed memory.
1330 * @retval ::WIMLIB_ERR_OPEN
1331 * Failed to open @a path for writing, or some file resources in @a
1332 * wim refer to files in the outside filesystem, and one of these files
1333 * could not be opened for reading.
1334 * @retval ::WIMLIB_ERR_READ
1335 * An error occurred when trying to read data from the WIM file associated
1336 * with @a wim, or some file resources in @a wim refer to files in the
1337 * outside filesystem, and a read error occurred when reading one of these
1339 * @retval ::WIMLIB_ERR_WRITE
1340 * An error occurred when trying to write data to the new WIM file at @a
1343 extern int wimlib_write(WIMStruct *wim, const char *path, int image, int flags);
1347 #endif /* _WIMLIB_H */