2 On Windows, improved performance of capturing an entire drive
6 Prevented miscompilation with gcc 10 at -O3
7 (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94994).
9 Avoided some compiler warnings with gcc 9 and later.
11 The 'mkwinpeimg' script now also looks for syslinux modules in
12 /usr/share/syslinux, to handle where openSUSE installs them.
14 Removed obsolete packaging files from the source tree.
17 Fixed a crash or incorrect output during LZMS compression with a
18 compression level greater than 50 and a chunk size greater than 64 MiB.
19 This affected wimlib v1.8.0 and later. In the unlikely event that you
20 used all these non-default compression settings in combination, e.g.
21 'wimcapture --solid --solid-compress=LZMS:100 --solid-chunk-size=128M',
22 run 'wimverify' on your archives to verify your data is intact.
25 On Windows, wimlib now supports capturing and applying extended
26 attributes (EAs). It is compatible with DISM with the /EA option,
27 available since Windows 10 version 1607. wimlib's EA support is on by
28 default and works on older versions of Windows too.
30 Partially fixed a bug where [ExclusionException] entries didn't take
31 effect when the containing directory is matched by [ExclusionList]. It
32 now works when the [ExclusionException] patterns are absolute. For
33 example, listing "/dir/file" in [ExclusionException] now works even if
34 "/dir" is matched by [ExclusionList].
36 Added a '--create' option to 'wimappend' which makes it create the WIM
37 file (like 'wimcapture') if it doesn't exist yet.
39 Added an '--include-integrity' option to various wimlib-imagex commands.
40 '--include-integrity' is like '--check', but it will just include an
41 integrity table in the output WIM(s), while skipping verification of any
42 existing integrity tables. This can be useful to avoid unwanted
43 verification of large WIM files, e.g. WIMs given by '--delta-from'.
45 'wimextract' now reads a pathlist file from standard input when "@-" is
48 wimsplit (API: wimlib_split()) now correctly handles a dot in the path
49 to the first split WIM part, prior to the filename extension.
51 'wimlib-imagex --version' now shows the version of the library it is
52 actually using (in case it is different from wimlib-imagex's version).
55 Fixed a bug that was causing the LZMS decompressor to be miscompiled
56 with GCC 7 (this broke extracting "solid" archives).
58 The Windows 10 Recycle Bin directory (\$RECYCLE.BIN) has been added to
59 the default exclusion list.
61 Added a '--quiet' option to wimlib-imagex.
63 The 'mkwinpeimg' script now also looks for the syslinux BIOS modules in
64 the directory /usr/lib/syslinux/modules/bios.
66 Files with timestamps before the year 1970 are now extracted correctly
67 to UNIX-style filesystems, are displayed correctly by
68 'wimdir --detailed', and show up correctly in mounted WIM images.
70 Files with timestamps after the year 2038 are now displayed correctly by
71 the 32-bit Windows build of wimlib.
74 Fixed a data corruption bug (incorrect compression) when storing an
75 already highly-compressed file in an LZX-compressed WIM with a chunk
76 size greater than or equal to 64K. Note that this is not the default
77 setting and such WIMs are not supported by Microsoft's WIM software, so
78 only users who used the --chunk-size option to wimlib-imagex or the
79 wimlib_set_output_chunk_size() API function may have been affected.
80 This bug was introduced in wimlib v1.10.0. See
81 https://wimlib.net/forums/viewtopic.php?f=1&t=300 for more details.
83 On all platforms, sparse files are now extracted as sparse.
85 Sparse files captured from UNIX-style filesystems are now marked as
86 sparse in the resulting WIM image.
88 Added support for storing Linux-style extended attributes in WIM images.
89 When the --unix-data option is used on Linux, wimlib-imagex now captures
90 and applies extended attributes, in addition to the already-supported
91 standard UNIX file permissions (owner/group/mode) and special files.
93 --delta-from is now supported by wimappend. (Previously it was only
94 supported by wimcapture.)
96 On Windows, improved the way in which files deduplicated with Windows'
97 Data Deduplication feature are captured.
99 The development files needed to link with wimlib using Visual Studio are
100 now included in the Windows release archives.
102 wimlib.h can now be included by Visual Studio without errors.
104 The example programs can now be compiled in C++ mode, and they also now
107 Updated 'mkwinpeimg' to work correctly on images that have a "windows"
108 (lower case) directory rather than a "Windows" (upper case) directory.
110 Fixed configuring with --enable-ssse3-sha1 from release tarball
111 (the file nasm_lt.sh was missing).
113 Made some documentation improvements.
116 The LZX compression ratio has been slightly improved. The default mode,
117 LZX level 50, is now almost as good as the old LZX level 100, while
118 being nearly the same speed as before.
120 Decompression performance has been slightly improved.
122 Filenames are now always listed in NTFS collation order.
124 On UNIX-like systems, wimlib can now process Windows filenames that are
125 not valid Unicode due to the presence of unpaired surrogates.
127 On UNIX-like systems, wimlib now always assumes UTF-8 encoding with the
128 addition of surrogate codepoints. Consequently, the environmental
129 variable WIMLIB_IMAGEX_USE_UTF8 and the flag
130 WIMLIB_INIT_FLAG_ASSUME_UTF8 no longer have any effect.
132 wimlib no longer depends on iconv.
134 Reduced memory usage slightly.
136 When a WIM image is applied in NTFS-3G mode, security descriptors are
137 now created in NTFS v3.0 format when supported by the volume.
139 Workarounds for bugs in libntfs-3g version 2013.1.13 and earlier have
140 been removed. Users are advised to upgrade to a later version of
143 On Windows, wimlib now supports case-sensitive filename extraction when
144 supported by the underlying operating system and filesystem (operating
145 system support requires a registry setting).
148 On UNIX, wimlib can now overwrite readonly files when extracting.
150 On Windows, fixed a bug where wimlib could leave a null DACL (a.k.a. "no
151 NTFS permissions") set on some existing directories after extraction.
153 On Windows, when applying a WIM image in "WIMBoot mode" when the WOF
154 driver is not loaded, wimlib can now correctly register a new WIM file
155 with the target volume when the target volume previously had had WIM
158 Added a new testing program.
160 Clarified the main license text and updated public domain dedications
161 for certain files to be more thorough.
164 Object IDs are now saved and restored on Windows and in NTFS-3G mode.
166 Reduced memory usage when exporting large numbers of WIM images.
168 Non UTF-8 locales are now detected correctly.
170 Addressed compiler warnings and enabled "silent" make rules by default.
172 Windows-specific updates:
173 Fixed a bug where duplicate backslashes could be generated in
174 link targets when extracting symbolic links and junctions.
176 Fixed a bug where the .cmd shortcuts for wimlib-imagex wouldn't
177 work if their full path contained a space.
179 Fixed bugs related to scanning SMB filesystems.
181 Added warning message about known issue with WindowsApps folder.
183 Added instructions for building from source on Windows.
185 VSS support is no longer marked "experimental".
187 Added missing license file for libdivsufsort-lite.
190 Added experimental support for Windows VSS (Volume Shadow Copy Service).
191 The new '--snapshot' argument to 'wimcapture' makes wimlib automatically
192 create and use a temporary VSS snapshot when capturing a WIM image.
194 Implemented setting of Windows-specific XML information, such as
195 architecture, system root, and version details. This information is now
196 automatically set in newly captured WIM images, when appropriate.
198 Improved performance of directory tree scans on Windows.
200 On Windows, to improve capture performance, wimlib now sometimes opens
201 files by inode number rather than by path. This is enabled for
202 wimcapture and wimappend, but for now other applications have to opt-in.
204 The progress messages printed by wimlib-imagex while writing WIM files
205 have been slightly tweaked.
207 Progress information for directory tree scans now counts all hard links.
208 Also, on Windows "\\?\" is no longer stripped from the current path.
210 Added a new '--image-property' option to 'wimcapture', 'wimappend', and
211 'wiminfo'. This option lets you assign values to elements in a WIM
212 file's XML document by name.
214 The wimlib_get_image_property() and wimlib_set_image_property() API
215 functions now support numerically indexed elements.
217 Fixed a bug where, on Windows, wimlib would change the security
218 descriptor of the target directory of an extraction even when the
219 '--no-acls' option was specified.
222 Fixed a bug with libntfs-3g extraction present since v1.8.1. Sometimes,
223 some Microsoft software would not correctly recognize data in the
224 resulting filesystem.
226 Made some small improvements to the compression algorithms:
227 LZX compression ratio was slightly improved.
228 XPRESS compression ratio and speed was slightly improved.
229 LZMS compression speed was slightly improved.
231 Improved handling of WIM XML data. wimlib no longer drops unrecognized
232 elements when exporting images. In addition, two API functions were
233 added for better access to elements in the XML document:
234 wimlib_get_image_property() and wimlib_set_image_property().
236 Added support for (unsafe) in-place compaction of WIM files.
238 Improved performance of image export by reusing metadata resources
239 instead of always rebuilding and recompressing them.
241 Improved performance of wimlib_update_image() by delaying the update to
242 the WIM's XML document until a write is requested.
244 On Windows, the target of an extraction may now be a reparse point
245 (which will be dereferenced).
247 On Windows, wimlib now correctly restores non-Microsoft reparse points.
248 However, this remains broken in NTFS-3g mode due to a libntfs-3g bug.
250 On Windows, wimlib now has improved performance when archiving files
251 from a filesystem backed by a WIM (a "WIMBoot" setup).
253 Several improvements to System Compression (compact mode) support:
255 wof.sys (or wofadk.sys) is now automatically attached to the
256 target volume if needed.
258 Compact-mode extractions now work correctly with wofadk.sys on
259 older versions of Windows.
261 For compatibility with the Windows bootloader, the requested
262 compression format now is overridden on certain files.
264 Other minor bugfixes.
267 This release primarily contains various minor bug fixes and
268 improvements, including:
270 Improved handling of deep directory structures.
272 Fixed a bug where on 32-bit systems, the library could enter an
273 infinite loop if a WIM file was malformed in a specific way.
275 Added a workaround for a case where libntfs-3g may report
276 duplicate streams in an NTFS file.
278 Windows symbolic links and junctions in mounted WIM images are
279 now automatically rewritten to be valid in the mounted location.
281 Reparse point fixes: correctly handle the "ReparseReserved"
282 field, and correctly handle "empty" (data-less) reparse points.
284 On Windows, wimlib now acquires SeManageVolumePrivilege, which
285 is needed to create externally backed files using the
288 Improved validation of filenames.
290 Improved LZMS decompression speed.
292 The configure script now honors alternate pkg-config settings.
294 Links have been updated to point to the new website.
296 In addition, experimental support has been added for compressing
297 extracted files using System Compression on Windows 10. This
298 functionality is available through the new '--compact' option to
299 'wimapply' and 'wimextract' as well as new library flags.
302 Fixed a bug in the LZX decompressor: malicious input data could cause
303 out of bounds writes to memory (since wimlib v1.2.2).
305 The output of the 'wiminfo' command now consolidates various boolean
306 flags (such as "Relative path junction") into a single line.
308 A file can now have both an unnamed data stream ("file contents") and a
309 reparse point stream. Such files can exist as a result of the use of
310 certain Windows features, such as offline storage, including "OneDrive".
311 wimlib will now store and restore both streams on Windows as well as in
312 NTFS-3g mode. Microsoft's WIMGAPI also has this behavior.
314 On Windows, named data streams of encrypted files are no longer stored
315 twice in WIM archives.
317 On Windows, named data streams are now correctly extracted to existing
318 "readonly" directories. Before, an error would be reported.
320 On Windows, it is now possible to do a "WIMBoot mode" extraction with
321 non-standalone WIMs such as delta WIMs.
323 On Windows, when doing an extraction in "WIMBoot mode", files larger
324 than 4 gigabytes are now never extracted as externally backed. This
325 works around a bug in Microsoft's "WOF" driver.
327 The '--enable-verify-compression' configure option has been removed. If
328 you want to verify a WIM file, use the 'wimverify' program.
330 The way the "file count", "directory count", "total bytes", and "hard
331 link bytes" image statistics (stored in the WIM XML data) is calculated
332 has been slightly changed.
334 In mounted WIM images, the disk usage provided for each file (st_blocks)
335 is now the compressed size rather than the uncompressed size.
337 The performance of the NTFS-3g and Windows capture modes has been
340 On UNIX-like systems, symbolic links whose targets contain the backslash
341 character are now handled correctly (losslessly).
344 Improved the LZX compressor. It is now 15-20% faster than before and
345 provides a slightly better compression ratio.
347 Improved the LZMS compressor. It now provides a compression ratio
348 slightly better than WIMGAPI while still being faster and using slightly
351 The compression chunk size in solid resources, e.g. when capturing or
352 exporting a WIM file using the '--solid' option, now defaults to 64 MiB
353 (67108864 bytes) instead of 32 MiB (33554432 bytes). This provides a
354 better compression ratio and is the same value that WIMGAPI uses. The
355 memory usage is less than 50% higher than wimlib v1.7.4 and is slightly
356 lower than WIMGAPI's memory usage, but if it is too much, it is still
357 possible to choose a lower value, e.g. with the '--solid-chunk-size'
358 option to wimlib-imagex.
360 The '--chunk-size' and '--solid-chunk-size' options to wimlib-imagex now
361 accept the 'K', 'M', and 'G' suffixes.
363 Files are now sorted by name extension when creating a solid WIM file.
365 Fixed various issues related to capture/apply of EFS-encrypted files on
368 The file list printed by 'wimdir' is now sorted by the platform-specific
369 case sensitivity setting, rather than always case sensitively. This
370 also affects the library function wimlib_iterate_dir_tree().
372 On Windows, some error and warning messages have been improved.
375 The Windows binary distribution no longer contains third party DLLs.
376 These dependencies are instead compiled directly into the libwim DLL.
378 Added more fixes for wimlib on non-x86 architectures such as ARM.
380 Extracting files to a Windows PE in-memory filesystem no longer fails if
381 the target files do not yet exist.
383 Improved the performance of XPRESS compression and LZMS decompression.
385 Enabled SSSE3 accelerated SHA-1 computation in x86_64 Windows builds.
386 It will automatically be faster on newer Intel and AMD processors.
388 Removed the --with-imagex-progname and --enable-more-assertions
392 Fix for very slow export from solid WIM / ESD files.
394 Fix for LZX and LZMS algorithms on non-x86 architectures, such as ARM.
396 New progress message: WIMLIB_PROGRESS_MSG_HANDLE_ERROR. Applications
397 may use this to treat some types of errors as non-fatal.
399 The library now permits making in-memory changes to a WIMStruct backed
400 by a read-only WIM file.
402 Fixes for "WIMBoot" extraction mode (Windows only):
404 When not using the WOF driver, extraction no longer fails if the
405 disk containing the WIM file has too many partitions.
407 When matching patterns in [PrepopulateList], all hard links of
408 each file are now considered.
410 The system registry files are now automatically treated as being
411 in [PrepopulateList].
413 Added a hack to try to work around an intermittent bug in
414 Microsoft's WOF (Windows Overlay Filesystem) driver.
417 Made more improvements to the XPRESS, LZX, and LZMS compressors.
419 A number of improvements to the Windows port:
421 Fixes for setting short filenames.
423 Faster "WIMBoot" extraction.
425 Updated and slimmed down the dependent DLLs.
427 ACL inheritence bits are now restored.
429 Mandatory integrity labels are now backed up and restored.
431 Added a workaround for an issue where in rare cases, wimlib could create
432 a compressed data stream that could not be read correctly by Windows
433 after an extraction in "WIMBoot" mode.
436 Added file count progress data for
437 WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE and
438 WIMLIB_PROGRESS_MSG_EXTRACT_METADATA.
440 Added support for testing file exclusions via the user-provided
443 Some documentation improvements.
445 Made some clarifications to the license text in the COPYING file.
448 Made more improvements to the XPRESS, LZX, and LZMS compressors.
450 The default compression mode for wimcapture is now LZX compression in
451 its default mode, which is the same as '--compress=maximum'.
453 You can now specify an optional integer compression level to the
454 '--compress' option; e.g. '--compress=lzx:75'.
456 Made a minor change to the LZMS compressor and decompressor to fix an
457 incompatibility with the Microsoft implementation. In the unlikely
458 event that you created an LZMS-compressed WIM with wimlib v1.7.0 or
459 earlier and a checksum error is reported when extracting files from it
460 with wimlib v1.7.1, decompress it with v1.7.0 then compress it with
463 Added 'verify' subcommand to wimlib-imagex.
465 Notable library changes:
467 Custom compressor parameters have been removed from the library
468 in favor of the simpler level-based API.
470 Decompressor parameters have been removed entirely.
472 Library users can now specify a custom file for warning and
473 error messages to be sent to, rather than the default of
476 New progress messages:
477 WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE,
478 WIMLIB_PROGRESS_MSG_EXTRACT_METADATA.
480 New function: wimlib_verify_wim().
483 Improved compression, decompression, and extraction performance.
485 Improved compatibility with version 3584 WIM / ESD files:
486 - Add support for reading and writing multiple solid blocks per
487 archive, which WIMGAPI/DISM can create when appending an image.
488 - Correctly create solid blocks larger than 4 GiB.
490 'add' commands passed to wimupdate will now replace existing
491 nondirectory files by default. Use the --no-replace option to get the
494 The license for the library now contains an exception that allows using
495 it under the LGPL. See the COPYING file for details.
497 In reparse-point fixup mode (the default for capture), symbolic links
498 and junctions that point outside the tree being captured are no longer
499 excluded from capture.
501 Added support for "WIMBoot" capture and extraction. See the
502 documentation for the new '--wimboot' option to wimcapture and wimapply
503 for more information.
505 On UNIX-like systems, you can now backup and restore device nodes, named
506 pipes, and sockets. In addition, 32-bit user and group IDs are now
509 The way that UNIX data is stored in WIM files has been changed. If you
510 captured any WIMs with the --unix-data option, to upgrade them you'll
511 need to apply them with --unix-data using wimlib-imagex v1.6.2, then
512 re-capture them with --unix-data using this version.
514 wimlib now understands tagged metadata items, such as object IDs, that
515 can be stored in WIM directory entries.
517 Removed the --hardlink and --symlink options to wimapply, since I don't
518 think they are too useful and they got in the way of improving the code.
520 WIMs will now retain their GUIDs when rebuilt (e.g. with wimoptimize).
522 The 'mkwinpeimg' script now supports writing the ISO image to standard
525 The <ARCH> element in WIM XML data is now exported correctly.
527 On Windows, sparse file attributes are no longer set on extracted files.
528 Oddly enough, this actually saves disk space in some cases.
530 On UNIX, configuring with --disable-xattr or --enable-xattr is no longer
531 supported. Mounting WIM images now always requires extended attribute
532 support. Use --without-fuse to disable support for mounting WIM images;
533 this will also disable the need for extended attribute support.
535 Configuring with --enable-ssse3-sha1 now works correctly.
537 The shared library version has been bumped up. The main
538 incompatibilities are:
540 - WIMLIB_COMPRESSION_TYPE_XPRESS is now 1 and
541 WIMLIB_COMPRESSION_TYPE_LZX is now 2 (so it's the same as
544 - User-provided progress functions are now registered using a
545 separate function, wimlib_register_progress_function(). The
546 'progress_func' argument to many functions no longer exists.
548 - The return value from user-provided progress functions is now
551 - A context argument has been added to the prototype of
552 user-provided progress functions.
554 - 'struct wimlib_capture_config' has been removed. The library
555 now takes the path to the configuration file directly. This
556 affects wimlib_add_image(), wimlib_add_image_multisource(),
557 and wimlib_update_image(). However, a NULL value passed in
558 the argument retains the same meaning.
560 - Removed deprecated functions: some (de)compression functions,
561 wimlib_extract_files(), and wimlib_print_metadata().
563 - Removed extraction flags: WIMLIB_EXTRACT_FLAG_HARDLINK,
564 WIMLIB_EXTRACT_FLAG_SYMLINK, WIMLIB_EXTRACT_FLAG_FILE_ORDER,
565 and WIMLIB_EXTRACT_FLAG_SEQUENTIAL.
567 - Removed some progress messages:
568 WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS,
569 WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
570 WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END. Numbering
573 - Removed some error codes. Numbering stays the same.
575 - Replaced WIMLIB_UNMOUNT_FLAG_LAZY with
576 WIMLIB_UNMOUNT_FLAG_FORCE.
578 - WIM paths passed to progress functions now have a leading
582 Case-insensitive comparisons of strings (e.g. filenames) containing
583 UTF-16 codepoints above 32767 are now done correctly.
585 Fixed build failure on Mac OS X.
587 wimunmount now provides the '--new-image' option to cause changes to a
588 read-write mounted image to be committed as a new image rather than as
589 an update of the mounted image. (The corresponding new library flag is
590 WIMLIB_UNMOUNT_FLAG_NEW_IMAGE.)
592 The LZMS ("recovery") compression chunk size, or "dictionary size", may
593 now be up to 1 GiB (1,073,741,824 bytes).
595 The performance of LZX ("maximum") and LZMS ("recovery") compression
596 with large chunk sizes has been slightly improved.
599 Stored files with size exactly 4 GiB (4,294,967,296 bytes) are now
600 decompressed correctly.
602 Fixed a bug in the LZX compressor introduced in v1.5.3. The bug
603 occurred in an unlikely case, and due to validity checks it did not
604 affect successfully created archives.
606 Fixed a minor compatibility issue with the LZMS compressor and
607 decompressor. This is *not* the default compression type and was only
608 introduced in v1.6.0. In the unlikely event that you created an
609 LZMS-compressed WIM with v1.6.0 and a checksum error is reported when
610 applying it with v1.6.1, decompress it with v1.6.0 then compress it with
613 Memory usage for LZMS and LZX compression has been decreased.
615 wimextract now allows wildcard characters in paths specified on the
616 command line. Also, the '--strict-wildcards' option has been removed
617 and replaced with the inverse option '--nullglob'. See the
618 documentation for wimextract for more details and changes.
620 The wimlib_extract_files() function is now considered deprecated in
621 favor of wimlib_extract_paths().
623 Fixed more permissions problems when extracting files on Windows.
625 A new '--no-attributes' option has been added to wimapply and
626 wimextract. The library flag is WIMLIB_EXTRACT_FLAG_NO_ATTRIBUTES.
628 The default chunk size is now set correctly when changing the
629 compression type of a WIM, for example with 'wimoptimize'.
631 The '--metadata' option to wiminfo has been replaced with the
632 '--detailed' option to wimdir.
634 In relevant wimlib-imagex commands, '--solid' may now be used as an
635 alias for '--pack-streams'.
638 Support for extracting and updating the new version 3584 WIMs has been
639 added. These WIMs typically pack many streams ("files") together into a
640 single compressed resource, thereby saving space. This degrades the
641 performance of random access (such as that which occurs on a mounted
642 image), but optimizations have been implemented for extraction. These
643 new WIM files also typically use a new compression format (LZMS), which
644 is similar to LZMA and can offer a better compression ratio than LZX.
645 These new WIM files can be created using `wimcapture' with
646 the '--compress=lzms --pack-streams' options. Note: this new WIM format
647 is used by the Windows 8 web downloader, but important segments of the
648 raw '.esd' files are encrypted, so wimlib will not be able to extract
649 such files until they are first decrypted.
651 wimlib now supports extracting files and directories from a WIM image
652 based on a "listfile" that itself contains the list of paths to extract.
653 For `wimextract', the syntax is to specify @LISTFILE instead of a PATH,
654 and for the library itself, the new APIs are wimlib_extract_pathlist()
655 and wimlib_extract_paths(). Path globs containing wildcard characters
658 For searching WIM files, wimlib now has configurable case sensitivity.
659 The default on Windows is still case-insensitive and the default on
660 UNIX-like systems is still case-sensitive, but this can be overridden
661 on either platform through flags to wimlib_global_init(). For
662 `wimlib-imagex', the environmental variable WIMLIB_IMAGEX_IGNORE_CASE
663 can be set to 1 or 0 for case-insensitive or case-sensitive behavior,
666 Support for compression chunk sizes greater than the default of 32768
667 bytes has been added. A larger chunk size typically results in a better
668 compression ratio. However, the MS implementation is seemingly not
669 compatible with all chunk sizes, especially for LZX compression, so the
670 defaults remain unchanged, with the exception of the new LZMS-compressed
671 WIMs, which use a larger chunk size by default.
673 The compression/decompression API exported by wimlib has been changed.
674 Now one set of functions handles all supported compression formats.
676 `wimcapture' and `wimappend' will now display the progress of scanning
677 the directory tree to capture, in addition to the progress of writing
678 data to the WIM. The '--verbose' option no longer does anything. The
679 library API change for this is the addition of several members to
680 `struct wimlib_progress_info_scan' available to progress callbacks.
682 `mkwinpeimg' now correctly handles the '--start-script' option when the
683 start script is not in the working directory.
685 Sequential extraction, previously requested by using
686 WIMLIB_EXTRACT_FLAG_SEQUENTIAL, is now the default.
687 WIMLIB_EXTRACT_FLAG_FILE_ORDER can be used to get the old default
688 behavior (extract in file order).
691 The new LZX compressor added in v1.5.2 has been improved and is now
692 enabled by default, except when `wimcapture' or `wimappend' is run
693 *without* the '--compress' option, in which case the faster LZX
694 compressor is used (the same as before). This behavior is reasonably
695 consistent with ImageX which actually uses "fast" (XPRESS) compression
696 by default. In those cases, use '--compress=maximum' to explicitly
697 capture a WIM image using the new (slower but better) LZX compressor.
699 The '--compress-slow' option still exists to `wimlib-imagex optimize',
700 but its new behavior is to tweak the new LZX compressor even more to
701 produce an even better compression ratio at the cost of more time spent
704 `wimlib-imagex optimize' now supports the '--compress=TYPE' option,
705 which recompresses the WIM file using the specified compression TYPE.
706 The new library API function used for this is
707 wimlib_set_output_compression_type().
709 Added the wimlib_get_xml_data() function to allow library clients to
710 easily retrieve the raw XML data from a WIM file if needed.
712 Fixed a bug that could cause an error code to be incorrectly returned
713 when writing XML data containing a <WINDOWS> element.
715 Mounted WIM images will now correctly show the default file stream even
716 if appears in the alternate data stream entries of the corresponding WIM
720 Added a new experimental LZX compressor which can be enabled by passing
721 '--compress-slow' to `wimlib-imagex capture' or `wimlib-imagex
722 optimize'. (The latter is only applicable if the WIM is already
723 LZX-compressed and the '--recompress' option is also given.) The
724 experimental compressor is much slower but compresses the data slightly
725 more --- currently usually to within a fraction of a percent of the
726 results from WIMGAPI/ImageX.
728 A workaround has been added for compatibility with versions of WinPE
729 that interpret alternate data stream entries in the boot WIM
732 An alignment bug that caused a crash in the LZX decompressor on some
735 wimlib now attempts to clear the WIM_HDR_FLAG_WRITE_IN_PROGRESS flag in
736 the WIM header when restoring the previous state of a WIM it failed to
739 Added a workaround to avoid an access denied error on Windows when
740 replacing a WIM file that another process has opened.
743 wimlib can now open WinPE WIMs from WAIK v2.1, which had a quirk that
744 needed to be handled.
746 A bug in the interpretation of negative IMAGE indices in the
747 --update-of=[WIMFILE:]IMAGE option to `wimlib-imagex capture' and
748 `wimlib-imagex append' has been fixed.
750 A workaround has been added to successfully apply security descriptors
751 with empty DACLs when the NTFS-3g apply mode is being used with NTFS-3g
752 2013.1.13 or earlier.
754 `wimlib-imagex capture' can now accept the '--delta-from' option
758 Added support for "pipable" WIMs. Pipable WIMs allow capturing images
759 to standard output and applying images from standard input, but they are
760 not compatible with Microsoft's software and are not created by default.
761 See the documentation for --pipable flag of `wimlib-imagex capture' for
764 To better support incremental backups, added support for declaring an
765 image as a modified form of another image. See the documentation for
766 the '--update-of' option of `wimlib-imagex append' and `wimlib-imagex
769 Added supported for "delta" WIMs. See the documentation for the
770 '--delta-from' option of `wimlib-imagex capture'.
772 The library support for managing split WIMs has been changed to support
773 other arrangements, such as delta WIMs, and be easier to use. This
774 change is visible in `wimlib-imagex', which also can now accept the
775 '--ref' option multiple times, and also now supports "delta" WIMs as
778 wimlib now preserves WIM integrity tables by default, even if
779 WIMLIB_WRITE_FLAG_CHECK_INTEGRITY is not specified. This changes the
780 behavior of `wimlib-imagex' whenever the WIM being operated on contains
781 an integrity table and the '--check' option is not specified.
783 `wimlib-imagex capture' now creates LZX-compressed WIMs by default
784 (when --compress is not specified). This provides the best compression
785 ratio by default, which is usually what is desired, at a cost of some
788 `wimlib-imagex' now supports being invoked as wimCOMMAND, where COMMAND
789 is the command as in `wimlib-imagex COMMAND'; for example, it can be
790 invoked as `wimapply' as an alternative to `wimlib-imagex apply'. The
791 appropriate hard links are created in UNIX installations of
792 `wimlib-imagex', while for the Windows distribution of `wimlib-imagex',
793 batch files that emulate this behavior are generated.
795 Security descriptors are now extracted correctly on Windows.
797 Fixed archiving DOS names in NTFS-3g capture mode.
799 The extraction code has been rewritten and it will now be easier to
800 support new features on all supported backends (currently Win32, UNIX,
801 and NTFS-3g). For example, hard-linked extraction mode (--hardlink) is
802 now supported on all backends, not just UNIX.
804 `mkwinpeimg' now supports grabbing files from the WAIK supplement rather
805 than the WAIK itself.
807 wimlib_global_init() now, by default, attempts to acquire additional
808 privileges on Windows, so library clients need not do this.
810 This update bumps the shared library version number up to 9, since it is
811 not binary compatibible with previous releases.
814 Fixed bug in `wimlib-imagex export' that made it impossible to export an
815 image from a WIM that is readonly at the filesystem level.
817 Return error code rather than segfaulting when trying to list files from
818 a non-first part of a split WIM.
820 Joining a WIM will now preserve the RP_FIX and READONLY flags.
823 On Windows, paths given to wimlib-imagex are now treated case
826 Improved behavior regarding invalid filenames; in particular, on
827 Windows, wimlib-imagex will, when extracting, now omit (with an option
828 to override this default) filenames differing only in case, or filenames
829 containing characters not valid on Windows.
831 On Windows, wimlib now supports capturing and extracting long paths
832 (longer than the so-called MAX_PATH).
834 On Windows, `wimlib-imagex update' now acquires proper privileges when
835 running as an Administrator.
837 `wimlib-imagex update' will now complain if no image is specified when
838 trying to update a multi-image WIM.
840 `wimlib-imagex update' now supports specifying a single update command
841 directly on the command line using the --command option.
843 wimlib-imagex will now choose different units for progress messages,
844 depending on the amount of data that needs to be processed.
846 `wimlib-imagex append' will now generate a unique WIM image name if no
847 name is specified and the defaulted name already exists in the WIM.
849 wimlib now allows you to create unnamed WIM images, which can then only
850 be referred to by index.
852 wimlib now allows you to explicitly declare you want write access to a
853 WIM by providing the WIMLIB_OPEN_FLAG_WRITE_ACCESS flag to
856 wimlib now respects the WIM_HDR_FLAG_READONLY flag when set in the WIM
859 Progress callbacks have been added to wimlib's wimlib_update_image()
862 Added wimlib_get_wim_info(), wimlib_set_wim_info(),
863 wimlib_iterate_dir_tree(), and wimlib_iterate_lookup_table() functions
866 NTFS-3g capture now only warns about two conditions previously treated
869 Fixed a couple issues with using wimlib-imagex on UDF filesystems on
872 wimlib now correctly detects and returns an error when reading a WIM
873 image with a cyclic directory structure. (Fun fact: such a WIM will
874 crash Microsoft's software.)
877 Added new "extract" and "update" subcommands to wimlib-imagex, along
878 with associated APIs in the library. These commands are intended mainly
879 for Windows use but can be used on UNIX as well.
881 Many documentation improvements.
883 Fixed a bug in the Windows build where relative symbolic links were not
884 captured in reparse-point fixup mode.
886 Fixed a bug in the Windows build where file handles were left open to
887 the WIM file, causing `wimlib_imagex optimize' to fail in some cases.
889 Fixed a bug in the Windows build of wimlib-imagex where globbing
890 split-WIM parts could cause the program to crash.
892 Fixed a bug where the creation time of WIM images would be shown instead
893 of the last modification time.
895 With the Windows build it is now possible to restore a WIM containing
896 symbolic links as a non-Administrator; however you will receive warnings
897 about not being able to extract the symbolic links.
900 Capturing a WIM image should now be significantly faster in most cases
901 due to improved use of the operating system's cache and avoiding reading
902 files twice whenever possible.
904 The Windows build should now work on Windows XP.
906 The Windows build now supports capturing and restoring hidden,
907 compressed, sparse, and encrypted files.
909 The Windows build now supports capturing and applying WIM images from
910 filesystems other than NTFS (with some reduced functionality).
912 The Windows build now extracts short names correctly.
914 Added support for "reparse-point" fixups (i.e. fixing up of symbolic
915 links). See docs for --rpfix and --norpfix flags of `wimlib-imagex
916 capture' and `wimlib-imagex apply'.
918 The performance of splitting and joining WIMs should be slightly
921 The LZX and XPRESS compression and decompression functions are now
922 exported from the library.
925 Improvements and bugfixes for the Windows build.
927 Added --strict-acls options.
929 Fixed the way that wimlib determines the order of images in the WIM.
932 Since wimlib can now be used on Windows, wimlib's implementation of
933 ImageX has been renamed to wimlib-imagex to avoid confusion with
934 Microsoft's implementation of ImageX, which would have the same file
935 name ("imagex.exe"). If you really don't like this you can pass the
936 --with-imagex-progname option to `configure' to choose a different name,
937 or even simply rename the binary yourself (but the former way will
938 configure the man pages to use the chosen name).
940 Various bugs fixed in the Windows build. Mainly to do with capturing
941 and restoring alternate data streams correctly in weird cases, and
942 requesting the correct privileges when opening files. Also added the
943 --noacls options to wimlib-imagex capture, append, and apply.
945 Windows build again: FindFirstStreamW() and FindNextStreamW() are now
946 dynamically loaded, so this may make the library compatible with Windows
947 XP (however, there may still be other problems).
950 Added experimental support for native Windows builds. Binaries can be
951 downloaded from the SourceForge page.
953 --source-list option added to `imagex capture' and `imagex append'.
955 Better support for different character encodings.
958 Storing UNIX file owners, groups, and modes in WIM images is now
959 possible using `imagex capture' with the --unix-data flag.
961 Minor bug fixes and documentation fixes.
964 NTFS capture: Fixed capturing duplicate reparse points.
966 NTFS capture: Capture first unnamed stream if there are more than one
967 (print warning instead of error).
969 Allow multiple test cases to execute concurrently (e.g. make -j2 check).
972 Added --arch switch to mkwinpeimg script to support getting AMD64 WinPE
975 Update to work with ntfs-3g version 2013.1.13.
978 Fixed truncating file to shorter but non-zero length on read-write
981 Various code cleanups and minor documentation fixes.
984 LZX and XPRESS decompression have received some additional optimizations
985 and should now be even faster. (Although, they were already pretty
986 fast--- much faster than typical I/O speeds.)
988 Fixed a bug introduced in v1.2.1 that would cause a directory tree
989 containing hard links to be captured incorrectly in some cases.
992 By default, unmounting a read-write mounted WIM with 'imagex unmount
993 --commit' will now change the WIM in-place without needing to write the
994 entire WIM again. Use 'imagex unmount --commit --rebuild' to get the
997 'imagex unmount' no longer has a hard-coded limit of 10 minutes to wait
998 for a response from the daemon servicing the mounted WIM. Instead,
999 every second 'imagex unmount' will check if the daemon is still alive,
1000 and keep waiting if so, otherwise terminate with an error.
1002 'imagex unmount --commit' on a read-write mounted WIM will now print
1003 progress information regarding the writing of new or modified streams
1004 the WIM, just like when capturing or appending a WIM.
1006 A small change has been made to XPRESS compression and it should improve
1007 the compression ratio slightly.
1009 A change was made that may improve performance slightly when applying a
1010 WIM image to a NTFS volume.
1012 Microsoft has managed to introduce even more bugs into their software,
1013 and now the WIMs for Windows 8 have incorrect (too low) reference counts
1014 for some streams. This is unsafe because such streams can be removed
1015 when they are in actuality still referenced in the WIM (perhaps by a
1016 different image). wimlib will now work around this problem by fixing
1017 the stream reference counts. This is only done when wimlib_delete_image() is
1018 called ('imagex delete') or when wimlib_mount_image() is called with
1019 WIMLIB_MOUNT_FLAG_READWRITE ('imagex mountrw'). Please note that this
1020 requires reading the metadata for all images in the WIM, so this will
1021 make these operations noticably slower on WIMs with multiple images.
1023 Various other bugfixes.
1026 Appending images to a WIM is now be done by default without re-building
1027 the whole WIM. Use the --rebuild flag to get the old behavior (which
1028 was to re-build the entire WIM when a new image is appended).
1030 A new command `imagex optimize' is now available to manually re-build a
1031 WIM that has wasted space due to repeated appends.
1033 Progress information has been improved, and now arbitrary callback
1034 functions can be used to show the progress of a WIM operation.
1036 A possible bug with changing the bootable image of a WIM was fixed.
1038 Some advisory locking is now done to prevent two processes from
1039 modifying a WIM at the same time (but only in some cases). For example,
1040 you cannot mount two images from a WIM read-write at the same time.
1042 Some functions have been reorganized:
1043 * wimlib_mount() renamed to wimlib_mount_image().
1044 * wimlib_unmount() renamed to wimlib_unmount_image().
1045 * wimlib_overwrite_xml_and_header() removed as
1046 wimlib_overwrite() suffices now.
1047 * wimlib_apply_image_to_ntfs_volume() removed as
1048 wimlib_extract_image() suffices now.
1049 * wimlib_add_image_from_ntfs_volume() removed as
1050 * wimlib_add_image() suffices now.
1052 Previously, the soname of libwim.so has been 0.0.0, despite many
1053 interface changes. The soname is now updated to 1.0.0 and will now be
1054 updated each release.
1057 Resources will now be compressed using multiple threads by default.
1058 (This applies to `imagex capture', `imagex append', and `imagex
1061 Some performance improvements in mounted WIMs.
1063 More progress information is shown when capturing a WIM.
1066 Lots of minor fixes, code cleanups, and some documentation updates.
1067 Nothing in particular is really noteworthy.
1070 LZX and XPRESS compression improvements.
1072 Fixed calculation of Directory Count, File Count, Total Bytes, and Hard
1073 Link Bytes of the WIM.
1076 Fixed bug when capturing NTFS file with multiple named data streams.
1078 Internally, we are now using inode structures, even though these don't
1079 appear literally in the WIM file. This simplifies some of the code
1080 (mainly for WIM mounting) and likely fixed a few problems, although it
1084 Fixed problem when exporting images from XPRESS to LZX compressed WIM or
1088 Enough changes to call it version 1.0.0!
1090 Capturing a WIM directly from a NTFS volume, and applying a WIM directly
1091 to a NTFS volume, is now supported.
1093 Hard links and symbolic links have much improved support. They are
1094 supported for WIM capture, WIM application, and mounted WIMs (you can
1095 even make them on read-write mounted WIMs).
1097 Alternate data streams are now supported on mounted WIMs through an
1098 xattr or a Windows-style stream interface. Also they are supported when
1099 capturing a WIM from NTFS or applying a WIM to NTFS.
1101 Split WIMs are better supported. You may now apply an image directly
1102 from a split WIM, mount an image from a split WIM read-only, or export
1103 an image from a split WIM.
1105 Using a capture configuration file is now supported (but not fully yet).
1107 SHA1 message digests are checked in more places, so we can make sure
1108 applied and captured data is correct.
1110 Man pages have been updated and consolidated.
1113 Fixed segfault when unmounting read-only WIM.
1116 Support for joining and splitting WIMs.
1117 Also, security data is now preserved by default.
1120 Can now build with older gcc and system headers, like on CentOS 5.
1123 Fixed bug that made it impossible to overwrite files in read-write
1127 Write byte-order mark before WIM XML data. (imagex.exe requires this to