2 On all platforms, sparse files are now extracted as sparse.
4 Sparse files captured from UNIX-style filesystems are now marked as
5 sparse in the resulting WIM image.
7 Added support for storing Linux-style extended attributes in WIM images.
8 When the --unix-data option is used on Linux, wimlib-imagex now captures
9 and applies extended attributes, in addition to the already-supported
10 standard UNIX file permissions (owner/group/mode) and special files.
12 On Windows, improved the way in which files deduplicated with Windows'
13 Data Deduplication feature are captured.
15 The development files needed to link with wimlib using Visual Studio are
16 now included in the Windows release archives.
18 wimlib.h can now be included by Visual Studio without errors.
20 The example programs can now be compiled in C++ mode, and they also now
23 Updated 'mkwinpeimg' to work correctly on images that have a "windows"
24 (lower case) directory rather than a "Windows" (upper case) directory.
26 Fixed configuring with --enable-ssse3-sha1 from release tarball
27 (the file nasm_lt.sh was missing).
29 Made some documentation improvements.
32 The LZX compression ratio has been slightly improved. The default mode,
33 LZX level 50, is now almost as good as the old LZX level 100, while
34 being nearly the same speed as before.
36 Decompression performance has been slightly improved.
38 Filenames are now always listed in NTFS collation order.
40 On UNIX-like systems, wimlib can now process Windows filenames that are
41 not valid Unicode due to the presence of unpaired surrogates.
43 On UNIX-like systems, wimlib now always assumes UTF-8 encoding with the
44 addition of surrogate codepoints. Consequently, the environmental
45 variable WIMLIB_IMAGEX_USE_UTF8 and the flag
46 WIMLIB_INIT_FLAG_ASSUME_UTF8 no longer have any effect.
48 wimlib no longer depends on iconv.
50 Reduced memory usage slightly.
52 When a WIM image is applied in NTFS-3G mode, security descriptors are
53 now created in NTFS v3.0 format when supported by the volume.
55 Workarounds for bugs in libntfs-3g version 2013.1.13 and earlier have
56 been removed. Users are advised to upgrade to a later version of
59 On Windows, wimlib now supports case-sensitive filename extraction when
60 supported by the underlying operating system and filesystem (operating
61 system support requires a registry setting).
64 On UNIX, wimlib can now overwrite readonly files when extracting.
66 On Windows, fixed a bug where wimlib could leave a null DACL (a.k.a. "no
67 NTFS permissions") set on some existing directories after extraction.
69 On Windows, when applying a WIM image in "WIMBoot mode" when the WOF
70 driver is not loaded, wimlib can now correctly register a new WIM file
71 with the target volume when the target volume previously had had WIM
74 Added a new testing program.
76 Clarified the main license text and updated public domain dedications
77 for certain files to be more thorough.
80 Object IDs are now saved and restored on Windows and in NTFS-3G mode.
82 Reduced memory usage when exporting large numbers of WIM images.
84 Non UTF-8 locales are now detected correctly.
86 Addressed compiler warnings and enabled "silent" make rules by default.
88 Windows-specific updates:
89 Fixed a bug where duplicate backslashes could be generated in
90 link targets when extracting symbolic links and junctions.
92 Fixed a bug where the .cmd shortcuts for wimlib-imagex wouldn't
93 work if their full path contained a space.
95 Fixed bugs related to scanning SMB filesystems.
97 Added warning message about known issue with WindowsApps folder.
99 Added instructions for building from source on Windows.
101 VSS support is no longer marked "experimental".
103 Added missing license file for libdivsufsort-lite.
106 Added experimental support for Windows VSS (Volume Shadow Copy Service).
107 The new '--snapshot' argument to 'wimcapture' makes wimlib automatically
108 create and use a temporary VSS snapshot when capturing a WIM image.
110 Implemented setting of Windows-specific XML information, such as
111 architecture, system root, and version details. This information is now
112 automatically set in newly captured WIM images, when appropriate.
114 Improved performance of directory tree scans on Windows.
116 On Windows, to improve capture performance, wimlib now sometimes opens
117 files by inode number rather than by path. This is enabled for
118 wimcapture and wimappend, but for now other applications have to opt-in.
120 The progress messages printed by wimlib-imagex while writing WIM files
121 have been slightly tweaked.
123 Progress information for directory tree scans now counts all hard links.
124 Also, on Windows "\\?\" is no longer stripped from the current path.
126 Added a new '--image-property' option to 'wimcapture', 'wimappend', and
127 'wiminfo'. This option lets you assign values to elements in a WIM
128 file's XML document by name.
130 The wimlib_get_image_property() and wimlib_set_image_property() API
131 functions now support numerically indexed elements.
133 Fixed a bug where, on Windows, wimlib would change the security
134 descriptor of the target directory of an extraction even when the
135 '--no-acls' option was specified.
138 Fixed a bug with libntfs-3g extraction present since v1.8.1. Sometimes,
139 some Microsoft software would not correctly recognize data in the
140 resulting filesystem.
142 Made some small improvements to the compression algorithms:
143 LZX compression ratio was slightly improved.
144 XPRESS compression ratio and speed was slightly improved.
145 LZMS compression speed was slightly improved.
147 Improved handling of WIM XML data. wimlib no longer drops unrecognized
148 elements when exporting images. In addition, two API functions were
149 added for better access to elements in the XML document:
150 wimlib_get_image_property() and wimlib_set_image_property().
152 Added support for (unsafe) in-place compaction of WIM files.
154 Improved performance of image export by reusing metadata resources
155 instead of always rebuilding and recompressing them.
157 Improved performance of wimlib_update_image() by delaying the update to
158 the WIM's XML document until a write is requested.
160 On Windows, the target of an extraction may now be a reparse point
161 (which will be dereferenced).
163 On Windows, wimlib now correctly restores non-Microsoft reparse points.
164 However, this remains broken in NTFS-3g mode due to a libntfs-3g bug.
166 On Windows, wimlib now has improved performance when archiving files
167 from a filesystem backed by a WIM (a "WIMBoot" setup).
169 Several improvements to System Compression (compact mode) support:
171 wof.sys (or wofadk.sys) is now automatically attached to the
172 target volume if needed.
174 Compact-mode extractions now work correctly with wofadk.sys on
175 older versions of Windows.
177 For compatibility with the Windows bootloader, the requested
178 compression format now is overridden on certain files.
180 Other minor bugfixes.
183 This release primarily contains various minor bug fixes and
184 improvements, including:
186 Improved handling of deep directory structures.
188 Fixed a bug where on 32-bit systems, the library could enter an
189 infinite loop if a WIM file was malformed in a specific way.
191 Added a workaround for a case where libntfs-3g may report
192 duplicate streams in an NTFS file.
194 Windows symbolic links and junctions in mounted WIM images are
195 now automatically rewritten to be valid in the mounted location.
197 Reparse point fixes: correctly handle the "ReparseReserved"
198 field, and correctly handle "empty" (data-less) reparse points.
200 On Windows, wimlib now acquires SeManageVolumePrivilege, which
201 is needed to create externally backed files using the
204 Improved validation of filenames.
206 Improved LZMS decompression speed.
208 The configure script now honors alternate pkg-config settings.
210 Links have been updated to point to the new website.
212 In addition, experimental support has been added for compressing
213 extracted files using System Compression on Windows 10. This
214 functionality is available through the new '--compact' option to
215 'wimapply' and 'wimextract' as well as new library flags.
218 Fixed a bug in the LZX decompressor: malicious input data could cause
219 out of bounds writes to memory (since wimlib v1.2.2).
221 The output of the 'wiminfo' command now consolidates various boolean
222 flags (such as "Relative path junction") into a single line.
224 A file can now have both an unnamed data stream ("file contents") and a
225 reparse point stream. Such files can exist as a result of the use of
226 certain Windows features, such as offline storage, including "OneDrive".
227 wimlib will now store and restore both streams on Windows as well as in
228 NTFS-3g mode. Microsoft's WIMGAPI also has this behavior.
230 On Windows, named data streams of encrypted files are no longer stored
231 twice in WIM archives.
233 On Windows, named data streams are now correctly extracted to existing
234 "readonly" directories. Before, an error would be reported.
236 On Windows, it is now possible to do a "WIMBoot mode" extraction with
237 non-standalone WIMs such as delta WIMs.
239 On Windows, when doing an extraction in "WIMBoot mode", files larger
240 than 4 gigabytes are now never extracted as externally backed. This
241 works around a bug in Microsoft's "WOF" driver.
243 The '--enable-verify-compression' configure option has been removed. If
244 you want to verify a WIM file, use the 'wimverify' program.
246 The way the "file count", "directory count", "total bytes", and "hard
247 link bytes" image statistics (stored in the WIM XML data) is calculated
248 has been slightly changed.
250 In mounted WIM images, the disk usage provided for each file (st_blocks)
251 is now the compressed size rather than the uncompressed size.
253 The performance of the NTFS-3g and Windows capture modes has been
256 On UNIX-like systems, symbolic links whose targets contain the backslash
257 character are now handled correctly (losslessly).
260 Improved the LZX compressor. It is now 15-20% faster than before and
261 provides a slightly better compression ratio.
263 Improved the LZMS compressor. It now provides a compression ratio
264 slightly better than WIMGAPI while still being faster and using slightly
267 The compression chunk size in solid resources, e.g. when capturing or
268 exporting a WIM file using the '--solid' option, now defaults to 64 MiB
269 (67108864 bytes) instead of 32 MiB (33554432 bytes). This provides a
270 better compression ratio and is the same value that WIMGAPI uses. The
271 memory usage is less than 50% higher than wimlib v1.7.4 and is slightly
272 lower than WIMGAPI's memory usage, but if it is too much, it is still
273 possible to choose a lower value, e.g. with the '--solid-chunk-size'
274 option to wimlib-imagex.
276 The '--chunk-size' and '--solid-chunk-size' options to wimlib-imagex now
277 accept the 'K', 'M', and 'G' suffixes.
279 Files are now sorted by name extension when creating a solid WIM file.
281 Fixed various issues related to capture/apply of EFS-encrypted files on
284 The file list printed by 'wimdir' is now sorted by the platform-specific
285 case sensitivity setting, rather than always case sensitively. This
286 also affects the library function wimlib_iterate_dir_tree().
288 On Windows, some error and warning messages have been improved.
291 The Windows binary distribution no longer contains third party DLLs.
292 These dependencies are instead compiled directly into the libwim DLL.
294 Added more fixes for wimlib on non-x86 architectures such as ARM.
296 Extracting files to a Windows PE in-memory filesystem no longer fails if
297 the target files do not yet exist.
299 Improved the performance of XPRESS compression and LZMS decompression.
301 Enabled SSSE3 accelerated SHA-1 computation in x86_64 Windows builds.
302 It will automatically be faster on newer Intel and AMD processors.
304 Removed the --with-imagex-progname and --enable-more-assertions
308 Fix for very slow export from solid WIM / ESD files.
310 Fix for LZX and LZMS algorithms on non-x86 architectures, such as ARM.
312 New progress message: WIMLIB_PROGRESS_MSG_HANDLE_ERROR. Applications
313 may use this to treat some types of errors as non-fatal.
315 The library now permits making in-memory changes to a WIMStruct backed
316 by a read-only WIM file.
318 Fixes for "WIMBoot" extraction mode (Windows only):
320 When not using the WOF driver, extraction no longer fails if the
321 disk containing the WIM file has too many partitions.
323 When matching patterns in [PrepopulateList], all hard links of
324 each file are now considered.
326 The system registry files are now automatically treated as being
327 in [PrepopulateList].
329 Added a hack to try to work around an intermittent bug in
330 Microsoft's WOF (Windows Overlay Filesystem) driver.
333 Made more improvements to the XPRESS, LZX, and LZMS compressors.
335 A number of improvements to the Windows port:
337 Fixes for setting short filenames.
339 Faster "WIMBoot" extraction.
341 Updated and slimmed down the dependent DLLs.
343 ACL inheritence bits are now restored.
345 Mandatory integrity labels are now backed up and restored.
347 Added a workaround for an issue where in rare cases, wimlib could create
348 a compressed data stream that could not be read correctly by Windows
349 after an extraction in "WIMBoot" mode.
352 Added file count progress data for
353 WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE and
354 WIMLIB_PROGRESS_MSG_EXTRACT_METADATA.
356 Added support for testing file exclusions via the user-provided
359 Some documentation improvements.
361 Made some clarifications to the license text in the COPYING file.
364 Made more improvements to the XPRESS, LZX, and LZMS compressors.
366 The default compression mode for wimcapture is now LZX compression in
367 its default mode, which is the same as '--compress=maximum'.
369 You can now specify an optional integer compression level to the
370 '--compress' option; e.g. '--compress=lzx:75'.
372 Made a minor change to the LZMS compressor and decompressor to fix an
373 incompatibility with the Microsoft implementation. In the unlikely
374 event that you created an LZMS-compressed WIM with wimlib v1.7.0 or
375 earlier and a checksum error is reported when extracting files from it
376 with wimlib v1.7.1, decompress it with v1.7.0 then compress it with
379 Added 'verify' subcommand to wimlib-imagex.
381 Notable library changes:
383 Custom compressor parameters have been removed from the library
384 in favor of the simpler level-based API.
386 Decompressor parameters have been removed entirely.
388 Library users can now specify a custom file for warning and
389 error messages to be sent to, rather than the default of
392 New progress messages:
393 WIMLIB_PROGRESS_MSG_EXTRACT_FILE_STRUCTURE,
394 WIMLIB_PROGRESS_MSG_EXTRACT_METADATA.
396 New function: wimlib_verify_wim().
399 Improved compression, decompression, and extraction performance.
401 Improved compatibility with version 3584 WIM / ESD files:
402 - Add support for reading and writing multiple solid blocks per
403 archive, which WIMGAPI/DISM can create when appending an image.
404 - Correctly create solid blocks larger than 4 GiB.
406 'add' commands passed to wimupdate will now replace existing
407 nondirectory files by default. Use the --no-replace option to get the
410 The license for the library now contains an exception that allows using
411 it under the LGPL. See the COPYING file for details.
413 In reparse-point fixup mode (the default for capture), symbolic links
414 and junctions that point outside the tree being captured are no longer
415 excluded from capture.
417 Added support for "WIMBoot" capture and extraction. See the
418 documentation for the new '--wimboot' option to wimcapture and wimapply
419 for more information.
421 On UNIX-like systems, you can now backup and restore device nodes, named
422 pipes, and sockets. In addition, 32-bit user and group IDs are now
425 The way that UNIX data is stored in WIM files has been changed. If you
426 captured any WIMs with the --unix-data option, to upgrade them you'll
427 need to apply them with --unix-data using wimlib-imagex v1.6.2, then
428 re-capture them with --unix-data using this version.
430 wimlib now understands tagged metadata items, such as object IDs, that
431 can be stored in WIM directory entries.
433 Removed the --hardlink and --symlink options to wimapply, since I don't
434 think they are too useful and they got in the way of improving the code.
436 WIMs will now retain their GUIDs when rebuilt (e.g. with wimoptimize).
438 The 'mkwinpeimg' script now supports writing the ISO image to standard
441 The <ARCH> element in WIM XML data is now exported correctly.
443 On Windows, sparse file attributes are no longer set on extracted files.
444 Oddly enough, this actually saves disk space in some cases.
446 On UNIX, configuring with --disable-xattr or --enable-xattr is no longer
447 supported. Mounting WIM images now always requires extended attribute
448 support. Use --without-fuse to disable support for mounting WIM images;
449 this will also disable the need for extended attribute support.
451 Configuring with --enable-ssse3-sha1 now works correctly.
453 The shared library version has been bumped up. The main
454 incompatibilities are:
456 - WIMLIB_COMPRESSION_TYPE_XPRESS is now 1 and
457 WIMLIB_COMPRESSION_TYPE_LZX is now 2 (so it's the same as
460 - User-provided progress functions are now registered using a
461 separate function, wimlib_register_progress_function(). The
462 'progress_func' argument to many functions no longer exists.
464 - The return value from user-provided progress functions is now
467 - A context argument has been added to the prototype of
468 user-provided progress functions.
470 - 'struct wimlib_capture_config' has been removed. The library
471 now takes the path to the configuration file directly. This
472 affects wimlib_add_image(), wimlib_add_image_multisource(),
473 and wimlib_update_image(). However, a NULL value passed in
474 the argument retains the same meaning.
476 - Removed deprecated functions: some (de)compression functions,
477 wimlib_extract_files(), and wimlib_print_metadata().
479 - Removed extraction flags: WIMLIB_EXTRACT_FLAG_HARDLINK,
480 WIMLIB_EXTRACT_FLAG_SYMLINK, WIMLIB_EXTRACT_FLAG_FILE_ORDER,
481 and WIMLIB_EXTRACT_FLAG_SEQUENTIAL.
483 - Removed some progress messages:
484 WIMLIB_PROGRESS_MSG_APPLY_TIMESTAMPS,
485 WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_BEGIN,
486 WIMLIB_PROGRESS_MSG_EXTRACT_DIR_STRUCTURE_END. Numbering
489 - Removed some error codes. Numbering stays the same.
491 - Replaced WIMLIB_UNMOUNT_FLAG_LAZY with
492 WIMLIB_UNMOUNT_FLAG_FORCE.
494 - WIM paths passed to progress functions now have a leading
498 Case-insensitive comparisons of strings (e.g. filenames) containing
499 UTF-16 codepoints above 32767 are now done correctly.
501 Fixed build failure on Mac OS X.
503 wimunmount now provides the '--new-image' option to cause changes to a
504 read-write mounted image to be committed as a new image rather than as
505 an update of the mounted image. (The corresponding new library flag is
506 WIMLIB_UNMOUNT_FLAG_NEW_IMAGE.)
508 The LZMS ("recovery") compression chunk size, or "dictionary size", may
509 now be up to 1 GiB (1,073,741,824 bytes).
511 The performance of LZX ("maximum") and LZMS ("recovery") compression
512 with large chunk sizes has been slightly improved.
515 Stored files with size exactly 4 GiB (4,294,967,296 bytes) are now
516 decompressed correctly.
518 Fixed a bug in the LZX compressor introduced in v1.5.3. The bug
519 occurred in an unlikely case, and due to validity checks it did not
520 affect successfully created archives.
522 Fixed a minor compatibility issue with the LZMS compressor and
523 decompressor. This is *not* the default compression type and was only
524 introduced in v1.6.0. In the unlikely event that you created an
525 LZMS-compressed WIM with v1.6.0 and a checksum error is reported when
526 applying it with v1.6.1, decompress it with v1.6.0 then compress it with
529 Memory usage for LZMS and LZX compression has been decreased.
531 wimextract now allows wildcard characters in paths specified on the
532 command line. Also, the '--strict-wildcards' option has been removed
533 and replaced with the inverse option '--nullglob'. See the
534 documentation for wimextract for more details and changes.
536 The wimlib_extract_files() function is now considered deprecated in
537 favor of wimlib_extract_paths().
539 Fixed more permissions problems when extracting files on Windows.
541 A new '--no-attributes' option has been added to wimapply and
542 wimextract. The library flag is WIMLIB_EXTRACT_FLAG_NO_ATTRIBUTES.
544 The default chunk size is now set correctly when changing the
545 compression type of a WIM, for example with 'wimoptimize'.
547 The '--metadata' option to wiminfo has been replaced with the
548 '--detailed' option to wimdir.
550 In relevant wimlib-imagex commands, '--solid' may now be used as an
551 alias for '--pack-streams'.
554 Support for extracting and updating the new version 3584 WIMs has been
555 added. These WIMs typically pack many streams ("files") together into a
556 single compressed resource, thereby saving space. This degrades the
557 performance of random access (such as that which occurs on a mounted
558 image), but optimizations have been implemented for extraction. These
559 new WIM files also typically use a new compression format (LZMS), which
560 is similar to LZMA and can offer a better compression ratio than LZX.
561 These new WIM files can be created using `wimcapture' with
562 the '--compress=lzms --pack-streams' options. Note: this new WIM format
563 is used by the Windows 8 web downloader, but important segments of the
564 raw '.esd' files are encrypted, so wimlib will not be able to extract
565 such files until they are first decrypted.
567 wimlib now supports extracting files and directories from a WIM image
568 based on a "listfile" that itself contains the list of paths to extract.
569 For `wimextract', the syntax is to specify @LISTFILE instead of a PATH,
570 and for the library itself, the new APIs are wimlib_extract_pathlist()
571 and wimlib_extract_paths(). Path globs containing wildcard characters
574 For searching WIM files, wimlib now has configurable case sensitivity.
575 The default on Windows is still case-insensitive and the default on
576 UNIX-like systems is still case-sensitive, but this can be overridden
577 on either platform through flags to wimlib_global_init(). For
578 `wimlib-imagex', the environmental variable WIMLIB_IMAGEX_IGNORE_CASE
579 can be set to 1 or 0 for case-insensitive or case-sensitive behavior,
582 Support for compression chunk sizes greater than the default of 32768
583 bytes has been added. A larger chunk size typically results in a better
584 compression ratio. However, the MS implementation is seemingly not
585 compatible with all chunk sizes, especially for LZX compression, so the
586 defaults remain unchanged, with the exception of the new LZMS-compressed
587 WIMs, which use a larger chunk size by default.
589 The compression/decompression API exported by wimlib has been changed.
590 Now one set of functions handles all supported compression formats.
592 `wimcapture' and `wimappend' will now display the progress of scanning
593 the directory tree to capture, in addition to the progress of writing
594 data to the WIM. The '--verbose' option no longer does anything. The
595 library API change for this is the addition of several members to
596 `struct wimlib_progress_info_scan' available to progress callbacks.
598 `mkwinpeimg' now correctly handles the '--start-script' option when the
599 start script is not in the working directory.
601 Sequential extraction, previously requested by using
602 WIMLIB_EXTRACT_FLAG_SEQUENTIAL, is now the default.
603 WIMLIB_EXTRACT_FLAG_FILE_ORDER can be used to get the old default
604 behavior (extract in file order).
607 The new LZX compressor added in v1.5.2 has been improved and is now
608 enabled by default, except when `wimcapture' or `wimappend' is run
609 *without* the '--compress' option, in which case the faster LZX
610 compressor is used (the same as before). This behavior is reasonably
611 consistent with ImageX which actually uses "fast" (XPRESS) compression
612 by default. In those cases, use '--compress=maximum' to explicitly
613 capture a WIM image using the new (slower but better) LZX compressor.
615 The '--compress-slow' option still exists to `wimlib-imagex optimize',
616 but its new behavior is to tweak the new LZX compressor even more to
617 produce an even better compression ratio at the cost of more time spent
620 `wimlib-imagex optimize' now supports the '--compress=TYPE' option,
621 which recompresses the WIM file using the specified compression TYPE.
622 The new library API function used for this is
623 wimlib_set_output_compression_type().
625 Added the wimlib_get_xml_data() function to allow library clients to
626 easily retrieve the raw XML data from a WIM file if needed.
628 Fixed a bug that could cause an error code to be incorrectly returned
629 when writing XML data containing a <WINDOWS> element.
631 Mounted WIM images will now correctly show the default file stream even
632 if appears in the alternate data stream entries of the corresponding WIM
636 Added a new experimental LZX compressor which can be enabled by passing
637 '--compress-slow' to `wimlib-imagex capture' or `wimlib-imagex
638 optimize'. (The latter is only applicable if the WIM is already
639 LZX-compressed and the '--recompress' option is also given.) The
640 experimental compressor is much slower but compresses the data slightly
641 more --- currently usually to within a fraction of a percent of the
642 results from WIMGAPI/ImageX.
644 A workaround has been added for compatibility with versions of WinPE
645 that interpret alternate data stream entries in the boot WIM
648 An alignment bug that caused a crash in the LZX decompressor on some
651 wimlib now attempts to clear the WIM_HDR_FLAG_WRITE_IN_PROGRESS flag in
652 the WIM header when restoring the previous state of a WIM it failed to
655 Added a workaround to avoid an access denied error on Windows when
656 replacing a WIM file that another process has opened.
659 wimlib can now open WinPE WIMs from WAIK v2.1, which had a quirk that
660 needed to be handled.
662 A bug in the interpretation of negative IMAGE indices in the
663 --update-of=[WIMFILE:]IMAGE option to `wimlib-imagex capture' and
664 `wimlib-imagex append' has been fixed.
666 A workaround has been added to successfully apply security descriptors
667 with empty DACLs when the NTFS-3g apply mode is being used with NTFS-3g
668 2013.1.13 or earlier.
670 `wimlib-imagex capture' can now accept the '--delta-from' option
674 Added support for "pipable" WIMs. Pipable WIMs allow capturing images
675 to standard output and applying images from standard input, but they are
676 not compatible with Microsoft's software and are not created by default.
677 See the documentation for --pipable flag of `wimlib-imagex capture' for
680 To better support incremental backups, added support for declaring an
681 image as a modified form of another image. See the documentation for
682 the '--update-of' option of `wimlib-imagex append' and `wimlib-imagex
685 Added supported for "delta" WIMs. See the documentation for the
686 '--delta-from' option of `wimlib-imagex capture'.
688 The library support for managing split WIMs has been changed to support
689 other arrangements, such as delta WIMs, and be easier to use. This
690 change is visible in `wimlib-imagex', which also can now accept the
691 '--ref' option multiple times, and also now supports "delta" WIMs as
694 wimlib now preserves WIM integrity tables by default, even if
695 WIMLIB_WRITE_FLAG_CHECK_INTEGRITY is not specified. This changes the
696 behavior of `wimlib-imagex' whenever the WIM being operated on contains
697 an integrity table and the '--check' option is not specified.
699 `wimlib-imagex capture' now creates LZX-compressed WIMs by default
700 (when --compress is not specified). This provides the best compression
701 ratio by default, which is usually what is desired, at a cost of some
704 `wimlib-imagex' now supports being invoked as wimCOMMAND, where COMMAND
705 is the command as in `wimlib-imagex COMMAND'; for example, it can be
706 invoked as `wimapply' as an alternative to `wimlib-imagex apply'. The
707 appropriate hard links are created in UNIX installations of
708 `wimlib-imagex', while for the Windows distribution of `wimlib-imagex',
709 batch files that emulate this behavior are generated.
711 Security descriptors are now extracted correctly on Windows.
713 Fixed archiving DOS names in NTFS-3g capture mode.
715 The extraction code has been rewritten and it will now be easier to
716 support new features on all supported backends (currently Win32, UNIX,
717 and NTFS-3g). For example, hard-linked extraction mode (--hardlink) is
718 now supported on all backends, not just UNIX.
720 `mkwinpeimg' now supports grabbing files from the WAIK supplement rather
721 than the WAIK itself.
723 wimlib_global_init() now, by default, attempts to acquire additional
724 privileges on Windows, so library clients need not do this.
726 This update bumps the shared library version number up to 9, since it is
727 not binary compatibible with previous releases.
730 Fixed bug in `wimlib-imagex export' that made it impossible to export an
731 image from a WIM that is readonly at the filesystem level.
733 Return error code rather than segfaulting when trying to list files from
734 a non-first part of a split WIM.
736 Joining a WIM will now preserve the RP_FIX and READONLY flags.
739 On Windows, paths given to wimlib-imagex are now treated case
742 Improved behavior regarding invalid filenames; in particular, on
743 Windows, wimlib-imagex will, when extracting, now omit (with an option
744 to override this default) filenames differing only in case, or filenames
745 containing characters not valid on Windows.
747 On Windows, wimlib now supports capturing and extracting long paths
748 (longer than the so-called MAX_PATH).
750 On Windows, `wimlib-imagex update' now acquires proper privileges when
751 running as an Administrator.
753 `wimlib-imagex update' will now complain if no image is specified when
754 trying to update a multi-image WIM.
756 `wimlib-imagex update' now supports specifying a single update command
757 directly on the command line using the --command option.
759 wimlib-imagex will now choose different units for progress messages,
760 depending on the amount of data that needs to be processed.
762 `wimlib-imagex append' will now generate a unique WIM image name if no
763 name is specified and the defaulted name already exists in the WIM.
765 wimlib now allows you to create unnamed WIM images, which can then only
766 be referred to by index.
768 wimlib now allows you to explicitly declare you want write access to a
769 WIM by providing the WIMLIB_OPEN_FLAG_WRITE_ACCESS flag to
772 wimlib now respects the WIM_HDR_FLAG_READONLY flag when set in the WIM
775 Progress callbacks have been added to wimlib's wimlib_update_image()
778 Added wimlib_get_wim_info(), wimlib_set_wim_info(),
779 wimlib_iterate_dir_tree(), and wimlib_iterate_lookup_table() functions
782 NTFS-3g capture now only warns about two conditions previously treated
785 Fixed a couple issues with using wimlib-imagex on UDF filesystems on
788 wimlib now correctly detects and returns an error when reading a WIM
789 image with a cyclic directory structure. (Fun fact: such a WIM will
790 crash Microsoft's software.)
793 Added new "extract" and "update" subcommands to wimlib-imagex, along
794 with associated APIs in the library. These commands are intended mainly
795 for Windows use but can be used on UNIX as well.
797 Many documentation improvements.
799 Fixed a bug in the Windows build where relative symbolic links were not
800 captured in reparse-point fixup mode.
802 Fixed a bug in the Windows build where file handles were left open to
803 the WIM file, causing `wimlib_imagex optimize' to fail in some cases.
805 Fixed a bug in the Windows build of wimlib-imagex where globbing
806 split-WIM parts could cause the program to crash.
808 Fixed a bug where the creation time of WIM images would be shown instead
809 of the last modification time.
811 With the Windows build it is now possible to restore a WIM containing
812 symbolic links as a non-Administrator; however you will receive warnings
813 about not being able to extract the symbolic links.
816 Capturing a WIM image should now be significantly faster in most cases
817 due to improved use of the operating system's cache and avoiding reading
818 files twice whenever possible.
820 The Windows build should now work on Windows XP.
822 The Windows build now supports capturing and restoring hidden,
823 compressed, sparse, and encrypted files.
825 The Windows build now supports capturing and applying WIM images from
826 filesystems other than NTFS (with some reduced functionality).
828 The Windows build now extracts short names correctly.
830 Added support for "reparse-point" fixups (i.e. fixing up of symbolic
831 links). See docs for --rpfix and --norpfix flags of `wimlib-imagex
832 capture' and `wimlib-imagex apply'.
834 The performance of splitting and joining WIMs should be slightly
837 The LZX and XPRESS compression and decompression functions are now
838 exported from the library.
841 Improvements and bugfixes for the Windows build.
843 Added --strict-acls options.
845 Fixed the way that wimlib determines the order of images in the WIM.
848 Since wimlib can now be used on Windows, wimlib's implementation of
849 ImageX has been renamed to wimlib-imagex to avoid confusion with
850 Microsoft's implementation of ImageX, which would have the same file
851 name ("imagex.exe"). If you really don't like this you can pass the
852 --with-imagex-progname option to `configure' to choose a different name,
853 or even simply rename the binary yourself (but the former way will
854 configure the man pages to use the chosen name).
856 Various bugs fixed in the Windows build. Mainly to do with capturing
857 and restoring alternate data streams correctly in weird cases, and
858 requesting the correct privileges when opening files. Also added the
859 --noacls options to wimlib-imagex capture, append, and apply.
861 Windows build again: FindFirstStreamW() and FindNextStreamW() are now
862 dynamically loaded, so this may make the library compatible with Windows
863 XP (however, there may still be other problems).
866 Added experimental support for native Windows builds. Binaries can be
867 downloaded from the SourceForge page.
869 --source-list option added to `imagex capture' and `imagex append'.
871 Better support for different character encodings.
874 Storing UNIX file owners, groups, and modes in WIM images is now
875 possible using `imagex capture' with the --unix-data flag.
877 Minor bug fixes and documentation fixes.
880 NTFS capture: Fixed capturing duplicate reparse points.
882 NTFS capture: Capture first unnamed stream if there are more than one
883 (print warning instead of error).
885 Allow multiple test cases to execute concurrently (e.g. make -j2 check).
888 Added --arch switch to mkwinpeimg script to support getting AMD64 WinPE
891 Update to work with ntfs-3g version 2013.1.13.
894 Fixed truncating file to shorter but non-zero length on read-write
897 Various code cleanups and minor documentation fixes.
900 LZX and XPRESS decompression have received some additional optimizations
901 and should now be even faster. (Although, they were already pretty
902 fast--- much faster than typical I/O speeds.)
904 Fixed a bug introduced in v1.2.1 that would cause a directory tree
905 containing hard links to be captured incorrectly in some cases.
908 By default, unmounting a read-write mounted WIM with 'imagex unmount
909 --commit' will now change the WIM in-place without needing to write the
910 entire WIM again. Use 'imagex unmount --commit --rebuild' to get the
913 'imagex unmount' no longer has a hard-coded limit of 10 minutes to wait
914 for a response from the daemon servicing the mounted WIM. Instead,
915 every second 'imagex unmount' will check if the daemon is still alive,
916 and keep waiting if so, otherwise terminate with an error.
918 'imagex unmount --commit' on a read-write mounted WIM will now print
919 progress information regarding the writing of new or modified streams
920 the WIM, just like when capturing or appending a WIM.
922 A small change has been made to XPRESS compression and it should improve
923 the compression ratio slightly.
925 A change was made that may improve performance slightly when applying a
926 WIM image to a NTFS volume.
928 Microsoft has managed to introduce even more bugs into their software,
929 and now the WIMs for Windows 8 have incorrect (too low) reference counts
930 for some streams. This is unsafe because such streams can be removed
931 when they are in actuality still referenced in the WIM (perhaps by a
932 different image). wimlib will now work around this problem by fixing
933 the stream reference counts. This is only done when wimlib_delete_image() is
934 called ('imagex delete') or when wimlib_mount_image() is called with
935 WIMLIB_MOUNT_FLAG_READWRITE ('imagex mountrw'). Please note that this
936 requires reading the metadata for all images in the WIM, so this will
937 make these operations noticably slower on WIMs with multiple images.
939 Various other bugfixes.
942 Appending images to a WIM is now be done by default without re-building
943 the whole WIM. Use the --rebuild flag to get the old behavior (which
944 was to re-build the entire WIM when a new image is appended).
946 A new command `imagex optimize' is now available to manually re-build a
947 WIM that has wasted space due to repeated appends.
949 Progress information has been improved, and now arbitrary callback
950 functions can be used to show the progress of a WIM operation.
952 A possible bug with changing the bootable image of a WIM was fixed.
954 Some advisory locking is now done to prevent two processes from
955 modifying a WIM at the same time (but only in some cases). For example,
956 you cannot mount two images from a WIM read-write at the same time.
958 Some functions have been reorganized:
959 * wimlib_mount() renamed to wimlib_mount_image().
960 * wimlib_unmount() renamed to wimlib_unmount_image().
961 * wimlib_overwrite_xml_and_header() removed as
962 wimlib_overwrite() suffices now.
963 * wimlib_apply_image_to_ntfs_volume() removed as
964 wimlib_extract_image() suffices now.
965 * wimlib_add_image_from_ntfs_volume() removed as
966 * wimlib_add_image() suffices now.
968 Previously, the soname of libwim.so has been 0.0.0, despite many
969 interface changes. The soname is now updated to 1.0.0 and will now be
970 updated each release.
973 Resources will now be compressed using multiple threads by default.
974 (This applies to `imagex capture', `imagex append', and `imagex
977 Some performance improvements in mounted WIMs.
979 More progress information is shown when capturing a WIM.
982 Lots of minor fixes, code cleanups, and some documentation updates.
983 Nothing in particular is really noteworthy.
986 LZX and XPRESS compression improvements.
988 Fixed calculation of Directory Count, File Count, Total Bytes, and Hard
989 Link Bytes of the WIM.
992 Fixed bug when capturing NTFS file with multiple named data streams.
994 Internally, we are now using inode structures, even though these don't
995 appear literally in the WIM file. This simplifies some of the code
996 (mainly for WIM mounting) and likely fixed a few problems, although it
1000 Fixed problem when exporting images from XPRESS to LZX compressed WIM or
1004 Enough changes to call it version 1.0.0!
1006 Capturing a WIM directly from a NTFS volume, and applying a WIM directly
1007 to a NTFS volume, is now supported.
1009 Hard links and symbolic links have much improved support. They are
1010 supported for WIM capture, WIM application, and mounted WIMs (you can
1011 even make them on read-write mounted WIMs).
1013 Alternate data streams are now supported on mounted WIMs through an
1014 xattr or a Windows-style stream interface. Also they are supported when
1015 capturing a WIM from NTFS or applying a WIM to NTFS.
1017 Split WIMs are better supported. You may now apply an image directly
1018 from a split WIM, mount an image from a split WIM read-only, or export
1019 an image from a split WIM.
1021 Using a capture configuration file is now supported (but not fully yet).
1023 SHA1 message digests are checked in more places, so we can make sure
1024 applied and captured data is correct.
1026 Man pages have been updated and consolidated.
1029 Fixed segfault when unmounting read-only WIM.
1032 Support for joining and splitting WIMs.
1033 Also, security data is now preserved by default.
1036 Can now build with older gcc and system headers, like on CentOS 5.
1039 Fixed bug that made it impossible to overwrite files in read-write
1043 Write byte-order mark before WIM XML data. (imagex.exe requires this to